Reeeealy strange stuff. - P8 Lite (2017) Discussion

Sup guys! For first, sorry x my english, i'm italian. Now, i've stuck into a kinda strange problem with my pra-lx1. Today i've decided to update my phone (it was the one of those "service updates", it was something around 300mb), but i was unable to do it with an unlocked bootloader, so i've used the adb console to relock it. As always, i've seen the emui factory reset screen , but now it's stuck on 99%. Then i've tried to reboot the phone, several times - nothing changes. I've tried to go into the fastboot mode, but it simply won't work, the combination of pwr button and -vol button have no effect, the phone's always going into emui factory reset mode. Aaaaand, here it is, i literally can't do anything. Pls help me xD
*As a detail, today i've used to update magisk (not the app, i mean.... U know, the package that you need to flash, idk if it has something to do with this problem....). I've already tried to discharge the phone at 0%, tried different cables, tried to first pushing ONLY the -vol button and then connecting it to the pc - same story T_T The only thing that i haven't tried it to leave the phone at factory reset screen.
Thank you!!
P.s. i'm a noob in speaking/writing in english, but i understand it pretty well, so don't worry (if someone ever will check this post )

Blackbrain45 said:
Sup guys! For first, sorry x my english, i'm italian. Now, i've stuck into a kinda strange problem with my pra-lx1. Today i've decided to update my phone (it was the one of those "service updates", it was something around 300mb), but i was unable to do it with an unlocked bootloader, so i've used the adb console to relock it. As always, i've seen the emui factory reset screen , but now it's stuck on 99%. Then i've tried to reboot the phone, several times - nothing changes. I've tried to go into the fastboot mode, but it simply won't work, the combination of pwr button and -vol button have no effect, the phone's always going into emui factory reset mode. Aaaaand, here it is, i literally can't do anything. Pls help me xD
*As a detail, today i've used to update magisk (not the app, i mean.... U know, the package that you need to flash, idk if it has something to do with this problem....). I've already tried to discharge the phone at 0%, tried different cables, tried to first pushing ONLY the -vol button and then connecting it to the pc - same story T_T The only thing that i haven't tried it to leave the phone at factory reset screen.
Thank you!!
P.s. i'm a noob in speaking/writing in english, but i understand it pretty well, so don't worry (if someone ever will check this post )
Click to expand...
Click to collapse
discharge the battery until the phone is turned off completely
Отправлено с моего EML-L29 через Tapatalk

vovan1982 said:
discharge the battery until the phone is turned off completely
Yep, already tried - same story, the phone boots into factory reset mode and stucks on 99..
Click to expand...
Click to collapse

Blackbrain45 said:
vovan1982 said:
discharge the battery until the phone is turned off completely
Yep, already tried - same story, the phone boots into factory reset mode and stucks on 99..
Click to expand...
Click to collapse
Very bad. Only test-point and dgtks firmware.
Отправлено с моего EML-L29 через Tapatalk
Click to expand...
Click to collapse

Related

[Q] HELP! Phone won't turn on after installing Aroma

Hey guys,
Today I decided to flash TrickDroid 10.0.0. Everything went well, installed it and at the end of flashing appeared a blue screen saying "Please wait". Waited for about 8-10 minutes, than just clicked once a power button. It asked me do I really wanna quit Aroma installation, pressed No. Then something "magical" happened and it was saying that installation is finished, click to reboot. So I did. After this step my phone won't turn on in any ways, tried to connect to pc - still no signs, it even won't charging..
How can I bring it to life!? Or this is it?
Nelayme said:
Hey guys,
Today I decided to flash TrickDroid 10.0.0. Everything went well, installed it and at the end of flashing appeared a blue screen saying "Please wait". Waited for about 8-10 minutes, than just clicked once a power button. It asked me do I really wanna quit Aroma installation, pressed No. Then something "magical" happened and it was saying that installation is finished, click to reboot. So I did. After this step my phone won't turn on in any ways, tried to connect to pc - still no signs, it even won't charging..
How can I bring it to life!? Or this is it?
Click to expand...
Click to collapse
Hold Power and Volume down until it goes into the bootloader, from there go into recovery and try re-flashing.
AllAboutTheCore said:
Hold Power and Volume down until it goes into the bootloader, from there go into recovery and try re-flashing.
Click to expand...
Click to collapse
Tried this many times but still nothing happens. I think it's totally bricked
Put it under a light, a very strong light and longpress the power button, try this
Are you S-On or S-Off? If you're S-On it isn't possible for you to totally brick the phone as far as I'm aware ... Especially not from flashing a ROM.
AllAboutTheCore said:
Are you S-On or S-Off? If you're S-On it isn't possible for you to totally brick the phone as far as I'm aware ... Especially not from flashing a ROM.
Click to expand...
Click to collapse
I'm S-On. I was searching for a solution later today and I found JTAG Riff box (actually, the service which brings the phones back to life by using this tool). However they can't help me at all, cause my phone isn't listed in that repairable list (not sure why). And the other thing they said was that I need to change the mainboard, because there're no other ways how to fix this problem. And it's a job for htc, not for them.
Nelayme said:
I'm S-On. I was searching for a solution later today and I found JTAG Riff box (actually, the service which brings the phones back to life by using this tool). However they can't help me at all, cause my phone isn't listed in that repairable list (not sure why). And the other thing they said was that I need to change the mainboard, because there're no other ways how to fix this problem. And it's a job for htc, not for them.
Click to expand...
Click to collapse
if your phone is booting to recovery you can still fix it without replacing mainboard just download cyanogenmod once and try flashing it after wiping everything and see if phone boots up. if it does you can use another custom sense 5rom and if it doesnt htc is the way to go
You're not bricked at all, calm down. Aroma crashes all the time and you just didn't finish the rom installation. Go back into recovery, wipe everything and flash it again. To turn the phone off, plug it into your PC and type 'adb reboot' and then hold down power and volume down as it is rebooting.

[Q] Phone stuck at the red motorola logo

Hi everybody. I have this problem.
- I installed a bunch of apps I wanted to try which I downloaded from an APK forum, mostly games and stuff like that. Nothing which could make any big changes to the phone.
- After some use the notification bar and the home, return and menu buttons disappeared from the screen. Then the phone restarted by itself. After it happened again I uninstalled some apps to see what happened.
- After some use the screen went black and couldn't do anything. I tried restarting the phone manually with the power and volume down buttons. The phone tried to restart but I got stuck at the red logo.
- I tried going to the AP Fastboot recovery option and wiping the cache and the phone still didn't work. I tried the factory reset and then reboot and the phone keeps getting stuck at the red logo.
Should I try reinstalling the system with RSD Lite? If so how and does it break the warranty? Or should I better make use of my warranty? I really need my phone for work and wouldn't like to have it away. I'm very new to the Android universe, so please explain me kindly. I have not rooted my phone nor unblocked the bootloader, and I wouldn't like to either. It is all stock:
- Android 4.1.2
- System Version 91.2.26001.XT890.Retail.en.EU
- Build 9.8.2I-50_SMI-26
Thanks!
daesroba said:
Hi everybody. I have this problem.
- I installed a bunch of apps I wanted to try which I downloaded from an APK forum, mostly games and stuff like that. Nothing which could make any big changes to the phone.
- After some use the notification bar and the home, return and menu buttons disappeared from the screen. Then the phone restarted by itself. After it happened again I uninstalled some apps to see what happened.
- After some use the screen went black and couldn't do anything. I tried restarting the phone manually with the power and volume down buttons. The phone tried to restart but I got stuck at the red logo.
- I tried going to the AP Fastboot recovery option and wiping the cache and the phone still didn't work. I tried the factory reset and then reboot and the phone keeps getting stuck at the red logo.
Should I try reinstalling the system with RSD Lite? If so how and does it break the warranty? Or should I better make use of my warranty? I really need my phone for work and wouldn't like to have it away. I'm very new to the Android universe, so please explain me kindly. I have not rooted my phone nor unblocked the bootloader, and I wouldn't like to either. It is all stock:
- Android 4.1.2
- System Version 91.2.26001.XT890.Retail.en.EU
- Build 9.8.2I-50_SMI-26
Thanks!
Click to expand...
Click to collapse
flashing with RSD-Lite won't void your warranty, so give it a try.
here you will find all you need (RSD-Lite and firmware)
ICuaI said:
flashing with RSD-Lite won't void your warranty, so give it a try.
here you will find all you need (RSD-Lite and firmware)
Click to expand...
Click to collapse
Thank you very much for your help! I will keep you informed if it worked
I tried to install RSD Lite and got this error. What could it be?
Edit:
Already installed succesfully
It worked! Thanks! Phone working fine!
Nice to hear :thumbup:
via RazR I & Tapatalk 4
they eenheitB
ICuaI said:
flashing with RSD-Lite won't void your warranty, so give it a try.
here you will find all you need (RSD-Lite and firmware)
Click to expand...
Click to collapse
I have the same problem, but it seems that the RSD can't find my cellphone connected to the computer.
kursku said:
I have the same problem, but it seems that the RSD can't find my cellphone connected to the computer.
Click to expand...
Click to collapse
Make sure to connect your phone to the computer in AP Fastboot mode

Soft Brick / Hard Brick ? Help...

Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!!
So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo.
The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
iantechie1979 said:
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!! So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo. The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
Click to expand...
Click to collapse
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Zarou said:
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Click to expand...
Click to collapse
finally a reply! okay so ill edit my post once ive finished replying to you. First off thanks for taking your time to read my post, i am most greatfull. In response to your questions,suggestions i can tell you:
i went to my friends, connected to their broadband and attempted to use eRecovey to update/restore my device. ALAS it did not work! I tried several times and it gets to downloading package from server only to end in a FAIL.. I got home tried connecting to public wifi and doing eRecovery but it just fails. So like you I have never managed to get eRecovery to work.
As for the booting sequence, as i explained before, whether i access stock recovery and wipe cache and wipe phone it does this no problem, reboots, only to get stuck on the honor logo boot animation. The same goes for installing updatte.app with three button method. it says its installed succesfully but does not get past the honor logo boot animation. Unfortunately your suggestion that it might just take a long time to boot is not the case I have left it for hours you see and it never gets to the setup wizard :crying:
As for warranty, i am in uk, bought the phone via amazon, and it was unlocked, so not from a carrier like you. So i guess ill just have to find my nearest huawei service centre and have them look at it.
Does anyone know the procedure as far as doing this. Do i phone them or email my problem and then send my phone to them or what?? Any help is very welcome.
Thanks for your time and patience.
Please, please help...i'm desperate
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
iantechie1979 said:
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
Click to expand...
Click to collapse
How comes you have TWRP with a locked bootloader ?
Zarou said:
How comes you have TWRP with a locked bootloader ?
Click to expand...
Click to collapse
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
iantechie1979 said:
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
Click to expand...
Click to collapse
OK, sorry for the misunderstanding. Yeah, try that and if this is still not working, I guess all you can do is try the same with other packages.

bootloop (starting, charging mode and also, with pc) z3c how to solve?

Hi guys, first of all sorry for my bad english
anyway, when I tryed to restart my phone, it was going to infinite bootloop... so, I tryed to lauch twrp and swipe all data also reinstalling the rom with adb/pc.. but in this moment happened the inaspected.. it go, to bootloop even if it was off, (changer screenshot, bootloop)
How Can I lauch adb, if my pc doesnt finds my z3c , because it goes to bootloop even if is off?
Xalein said:
Hi guys, first of all sorry for my bad english
anyway, when I tryed to restart my phone, it was going to infinite bootloop... so, I tryed to lauch twrp and swipe all data also reinstalling the rom with adb/pc.. but in this moment happened the inaspected.. it go, to bootloop even if it was off, (changer screenshot, bootloop)
How Can I lauch adb, if my pc doesnt finds my z3c , because it goes to bootloop even if is off?
Click to expand...
Click to collapse
So it won't stay off, even if you press power and volume up together for a few seconds? Which rom were you using, what did you do before it bootlooped, bootloader unlocked, etc...?
levone1 said:
So it won't stay off, even if you press power and volume up together for a few seconds? Which rom were you using, what did you do before it bootlooped, bootloader unlocked, etc...?
Click to expand...
Click to collapse
even it wont stay off, always bootloop;
If I remember well, first I unlock the phone with the code from sony; after launch the twrp with adp on pc (for a strange motive it (the phone) doesnt load the twrp without pc) , clean cache and co, like 2/3 times, after installing the new rom
it seems to me the omni rom 7.1.2
Xalein said:
even it wont stay off, always bootloop;
If I remember well, first I unlock the phone with the code from sony; after launch the twrp with adp on pc (for a strange motive it (the phone) doesnt load the twrp without pc) , clean cache and co, like 2/3 times, after installing the new rom
it seems to me the omni rom 7.1.2
Click to expand...
Click to collapse
Sorry to repeat, but just to be clear - when you press and hold power and volume up, what happens? Are you saying it turns off, and then automatically turns back on, and bootloops?
levone1 said:
Sorry to repeat, but just to be clear - when you press and hold power and volume up, what happens? Are you saying it turns off, and then automatically turns back on, and bootloops?
Click to expand...
Click to collapse
strangely this time go, it go on twrp..
but since I have encrypted, twrp request me the pass.. but, inserting the right pass, it always failed.. there is a way, to bipass this process (even with formatting the phone) to acess to twrp?
Xalein said:
strangely this time go, it go on twrp..
but since I have encrypted, twrp request me the pass.. but, inserting the right pass, it always failed.. there is a way, to bipass this process (even with formatting the phone) to acess to twrp?
Click to expand...
Click to collapse
Try fastboot flash, (different kernel or different recovery...), or flash stock rom with FT.
levone1 said:
Try fastboot flash, (different kernel or different recovery...), or flash stock rom with FT.
Click to expand...
Click to collapse
I solved with format data.. thanks
I have to re-installed the rom.. but I just to have wait to understand if it is still a bootloop or the classic installation phase..
Xalein said:
I solved with format data.. thanks
I have to re-installed the rom.. but I just to have wait to understand if it is still a bootloop or the classic installation phase..
Click to expand...
Click to collapse
10+ minutes is not unusual for first boot for stock rom.
levone1 said:
10+ minutes is not unusual for first boot for stock rom.
Click to expand...
Click to collapse
solved
but futhermore, another problem (hardware problem, I don't want to open another post):
today I open my cell phone because the screen had stuck, discovering that the connector had disconnected.. ok solved.. but the cellphone seems electrically charged, I mean more than 5 (I think) time I got the shock
any solution?/possible causes? (isnt the first time that I open the phone)

Bootloop

I just wanna ask after the oct update i got bootloop now when i try to go to service center they told me that the problem is the motherboard. When i explain to them the reason i just update it then bootloop they always tell me the problem is motherboard. And i need to fix it and the cost is half the price of the phone. Now i need some help. When i try to turn on its stuck to androide one then off whne i try to go to fastboot its okay. When i charge it it turns on and off. I jus need some help.
mrvonzuela said:
I just wanna ask after the oct update i got bootloop now when i try to go to service center they told me that the problem is the motherboard. When i explain to them the reason i just update it then bootloop they always tell me the problem is motherboard. And i need to fix it and the cost is half the price of the phone. Now i need some help. When i try to turn on its stuck to androide one then off whne i try to go to fastboot its okay. When i charge it it turns on and off. I jus need some help.
Click to expand...
Click to collapse
is your bootloader unlocked?
If so, have you tried booting latest twrp image from fastboot?
Code:
fastboot boot twrp.img
Sounds like you may at least have to try to wipe and format your phone at the cost of all data.
But then you could use the situation to install a good custom ROM..
If you were doing a normal update, your phone should revert to the previous slot after a few attempted reboots.
Keep trying to reboot.
If nothing else works, try flashing september version from EDL (search it on the forums).
I flashed and still couldn't boot at first. I tried restarting a lot of times, until it got on the "Retry" or "Power off" option. I let the phone sit on this screen until it shut itself off. After tried booting up a few more times until it finally did.
I was not plugged in during this.
I'm not going near that october patch ever again.
Hello everyone,
I'm using mi A2 (64gb). It is rooted and was running on Resurrection Remix 8.6.2. Somedays earlier, I let my phone idle, suddenly it starts rebooting, just like bootlooping. After seeing that I booted in recovery and wiped dalvik and cache then rebooted and the phone rebooted in system successfully. But then I noticed the power menu appearing continuously on the home screen, I tried to dismiss it but it rebooted again and so on. From then, only the splash screen appeared for 8 seconds and it reboots again. I can boot into recovery or fastboot but only for 2-3 seconds then it reboots.
I've searched on the internet and was flashing firmware manually from fastboot but accidentally, I flashed an image file in a wrong location and the phone screen turned off and nothing appeared. Then I found that it had entered in EDL mode. but still it is rebooting and I can't flash firmware from mi flashing tool as fastboot wasn't working.
This is the problem of my phone. A help would be amazing! Thank you!
Ps. I'm new here and it is my first post so if anything is wrong. I beg your pardon and sorry for my bad English.
Rm789 said:
Hello everyone,
I'm using mi A2 (64gb). It is rooted and was running on Resurrection Remix 8.6.2. Somedays earlier, I let my phone idle, suddenly it starts rebooting, just like bootlooping. After seeing that I booted in recovery and wiped dalvik and cache then rebooted and the phone rebooted in system successfully. But then I noticed the power menu appearing continuously on the home screen, I tried to dismiss it but it rebooted again and so on. From then, only the splash screen appeared for 8 seconds and it reboots again. I can boot into recovery or fastboot but only for 2-3 seconds then it reboots.
I've searched on the internet and was flashing firmware manually from fastboot but accidentally, I flashed an image file in a wrong location and the phone screen turned off and nothing appeared. Then I found that it had entered in EDL mode. but still it is rebooting and I can't flash firmware from mi flashing tool as fastboot wasn't working.
This is the problem of my phone. A help would be amazing! Thank you!
Ps. I'm new here and it is my first post so if anything is wrong. I beg your pardon and sorry for my bad English.
Click to expand...
Click to collapse
Try shorting testpoint in motherboard then enter EDL mode,
Then use mi flash tool.need to remove battery first.
How? Watch youtube, for mi6x. Mi 6x = a2, sort of.
~yes, you need to remove/open the phone.
shizuni said:
Try shorting testpoint in motherboard then enter EDL mode,
Then use mi flash tool.need to remove battery first.
How? Watch youtube, for mi6x. Mi 6x = a2, sort of.
~yes, you need to remove/open the phone.
Click to expand...
Click to collapse
Thank you for replying
One thing to note I'm in edl mode already. Do I need to short the test points again?
Rm789 said:
Thank you for replying
One thing to note I'm in edl mode already. Do I need to short the test points again?
Click to expand...
Click to collapse
U said rebooting even in edl, if not. Dont. Just make sure you have enough battery juice.
Use xiaomi tools. Or not, I uncompressed the file and click flash all.
shizuni said:
U said rebooting even in edl, if not. Dont. Just make sure you have enough battery juice.
Use xiaomi tools. Or not, I uncompressed the file and click flash all.
Click to expand...
Click to collapse
Yes, phone is rebooting in edl mode. I also charged it to around 40 minutes before connect it to pc but no hope. I got it
Thank you so much for the clarification.
i have a similar issue, phone reboots when flashing reached vendor b and goes into bootloop, anybody ?

Categories

Resources