Related
I'll be getting one of these in a few days time and wanted to know if it ships with a screen protector and if it does, is it usable. 1st gen shipped with one but had this big whitish moto g logo that ruined everything. As this mobile is quite new failed to find too many options. There is the usual GadgetShield but just wanted to know if the stock (if it has) can be used for a few months.
Any help would be appreciated.
The bottom left corner is white, but it's quite good in my opinion, due to it's matte surface the screen looks a bit grainy, but it's good enough until there are other screen protectors available.
not named said:
The bottom left corner is white, but it's quite good in my opinion, due to it's matte surface the screen looks a bit grainy, but it's good enough until there are other screen protectors available.
Click to expand...
Click to collapse
its fine for me. thanks a lot
Anybody found a good quality matte screen guard? Is gadgetshieldz matte or glossy, any idea?
Thanks
I haz me a chineZe glass on my Nexus5 and Im getting the misses a MotoG2 and a Glass screen protector for her also..
Mine didn't came with a screen protector. I got it from London. Had to buy a couple on Amazon, turns out the Matte ones are the best choice for me. Doesn't require much cleaning and are like the glossy ones.
not named said:
The bottom left corner is white, but it's quite good in my opinion, due to it's matte surface the screen looks a bit grainy, but it's good enough until there are other screen protectors available.
Click to expand...
Click to collapse
The little white tab actually peels off, lift the protector up a bit and use your nail to get the tab off and stick back the protector.
I just ordered an Ultimate shield protector though off ebay, hope it's good.
Is there any need for a screen protector at all? Isn't gorilla glass hard enough?
Rochambeau said:
Is there any need for a screen protector at all? Isn't gorilla glass hard enough?
Click to expand...
Click to collapse
I bought a few to keep my screen "clean"
Can anybody give me link of good matte screen protector.
I got my moto g yesterday, I still have the initial plastic layer on my screen.. So do I need a screen protector? Because colors like blue, orange seem a bit dull..
i put on it a glass screen protector (casebase) and i notice that if i put the phone on a table and i try to use the touch sometimes it doesn't work on the edges...for example it's hard to write the Q or the P with the keyboard
if I keep it in hand it works better, but not as good as it was without the glass protector or with the classical screen protector made of plastic
same here
mity93 said:
i put on it a glass screen protector (casebase) and i notice that if i put the phone on a table and i try to use the touch sometimes it doesn't work on the edges...for example it's hard to write the Q or the P with the keyboard
if I keep it in hand it works better, but not as good as it was without the glass protector or with the classical screen protector made of plastic
Click to expand...
Click to collapse
dude same problem here, exactly same, after applying tempered glass screen protector .....bro plz inform me if you find any solution plz plz
the solution is use the phone with 2 hands or with voice command
I put a mr. Shield screen protector on my wifes moto g2. It was super easy to apply, looks absolutely perfect. They are super cheap on amazon. Not tempered glass tho. They were 6 bucks shipped for a pack of 5. I highly recommend them.
vikasb32 said:
Can anybody give me link of good matte screen protector.
Click to expand...
Click to collapse
Bought matte screen protector from following link
http://www.ebay.in/itm/Matte-Screen...?pt=IN_Mobile_Accessories&hash=item1c47945485
Its nice and cheap.
not named said:
The bottom left corner is white, but it's quite good in my opinion, due to it's matte surface the screen looks a bit grainy, but it's good enough until there are other screen protectors available.
Click to expand...
Click to collapse
You can remove this white corner tape cover.
It's not matte, but I do have this brand, and it's pretty good. Cheap, too. I've used them plenty of times before, and I've always been pretty happy with this company.
I can't delete my comment
vikasb32 said:
Can anybody give me link of good matte screen protector.
Click to expand...
Click to collapse
i use scranwrap. its cheap and works and can be replaced in bulk
I just got my zagg invisible shield glass screen protector yesterday and there are a lot of bubbles around the edges of the screen protector. Is there any solutions to this or is it because of the dramatic curves of the screen?
ZAGG tempered glass is rubbish for the N6 at the moment. Get your money back and get something better.. There' s a huge thread in this same section about glass protectors, you should go look there.
Use a sticker to pre-dust the screen before applying the sp
Thanks but we've done over 20 of these before. There wasn't any dust. It seems to me that it is only the edges where maybe the screen starts to curve.
http://forum.xda-developers.com/nex...protectors-t2922645/post57885751#post57885751
Its all been spoken about already. All the brands, all the bubbling and halo effects
The 3rd reveision or 2nd of the Jelly Comb doesn' have the halo. Even one of the guys that posted in that thread installed an extreme guard with no halo. It has to do with the curve and there are differences on the screen curtavture between devices for whatever reason.
Hi !
Has anyone here bought the Auckly screen protector for oneplus 5T ?
I'm considering buying it, but I haven't seen any review of it yet.
Is it compatible with the case included in the OP5T box ?
Thanks
according to a comment on amazon it sticks only on the black edges and not in the center. which makes the touch does not respond very well
I ordered orzly pro will get it tomorrow I'll post my review once I install it
thanks a lot
I have got an Auckly fitted and yes it only sticks to the edges but I have noticed no difference at all to screen sensitivity. With the screen off in some types of light there is a slight oil-slick stripe down the middle but as I say this is only in some types of artificial light and it is not visible with the screen on. Similarly there is a light dot matrix effect but this isn't visible with the screen on either.
I have the auckly TGSP installed on my OP5T, but I see the dot pattern and the oil slick stripe even when the screen is on. How could I prevent this ?
qerboz said:
I have the auckly TGSP installed on my OP5T, but I see the dot pattern and the oil slick stripe even when the screen is on. How could I prevent this ?
Click to expand...
Click to collapse
With these kinds of protectors (without glue in the middle) you simply can't
I had to remove the factory applied plastic screen.
Now I can't find a single plastic screen protector bring sold for the V10! Has anyone managed to snag one? I'm only finding tempered glass protectors which I don't want (mainly because they look terrible). I'm in India BTW.
Had the same thing the other day.
Finally bought a glass full screen cover. Still looks awesome that way, the only downside is that the fingerprint sensor is now recessed. There also was no hole for the camera, but that doesn't matter at all.
Bart79 said:
Had the same thing the other day.
Finally bought a glass full screen cover. Still looks awesome that way, the only downside is that the fingerprint sensor is now recessed. There also was no hole for the camera, but that doesn't matter at all.
Click to expand...
Click to collapse
Why did you need to remove the factory cover if you don't mind me asking?
Is the tempered glass listed going to provide shock absorption to prevent cracks to the display in case of falls? (see this horror video)
https://www.youtube.com/watch?v=K2fNq9YrjXU
I removed it because of several scratches and smudges. Those bugged me a lot.
Haven't dropped the phone, so I haven't tested it, but the tempered glass should indeed crack instead of the phone screen.
qaqarox said:
I had to remove the factory applied plastic screen.
Now I can't find a single plastic screen protector bring sold for the V10! Has anyone managed to snag one? I'm only finding tempered glass protectors which I don't want (mainly because they look terrible). I'm in India BTW.
Click to expand...
Click to collapse
Here you go
For Huawei Honor View 10 / V10 Screen Protector (Not Tempered Glass),ONICO 3D Curved Protective Film Compatible With Case Friendly Full Body Round Coverage Protection (Front HD) https://www.amazon.co.uk/dp/B071D3F4S2/ref=cm_sw_r_cp_apa_U3FyBb8BBEBE4
I have purchased many so called "perfect" Tempered Glass Screen Protectors for the Mi Mix 2/2s and threw most of them away for poor adhesive, halo and rainbow affect, and visibility issues. I finally ordered the NILLKIN CP+ Anti-Explosion Glass Screen Protector for Xiaomi Mi Mix 2/2S from OppoMart https://www.oppomart.com/xiaomi/mi-...-screen-protector-for-xiaomi-mi-mix-2-2s.html
Black border, no thanks.
foremi said:
Black border, no thanks.
Click to expand...
Click to collapse
Agreed!!
foremi said:
Black border, no thanks.
Click to expand...
Click to collapse
the border is a guide and ensure it is case friendly - but to each their own and halo
No Halo effect (like the black bordered screen protector that I had for my old Mi Mix) with these 5D black border screen protector for my Mi Mix 2s
https://www.aliexpress.com/item/Hat...025.html?spm=a2g0s.9042311.0.0.38294c4dX7C8zr
It is like a non black bordered screen protector, and not at all like the one I had that was a black bordered screen protector for the Mi Mix.
The Halo effect is caused by the adhesive pad that is used around the black border part of the screen protector, and as such, the screen protector floats over the phone's screen, creating the halo or rainbow effect.
The black border screen protector I received this week does not have this adhesive on the underside of the black border, and as such, the entire underneath surface of the screen protector sits in direct contact with the phone screen and hence does not hover or float on the phones screen. This type of installation is like any other screen protector that just bonds to the phone's screen, thereby eliminating the halo effect.
MUCH easier to align than an undersized non black bordered screen protector.
Cheers,
LormaD
andril said:
I have purchased many so called "perfect" Tempered Glass Screen Protectors for the Mi Mix 2/2s and threw most of them away for poor adhesive, halo and rainbow affect, and visibility issues. I finally ordered the NILLKIN CP+ Anti-Explosion Glass Screen Protector for Xiaomi Mi Mix 2/2S from OppoMart https://www.oppomart.com/xiaomi/mi-...-screen-protector-for-xiaomi-mi-mix-2-2s.html
Click to expand...
Click to collapse
Had this one. The adhesion is very nice, however the camera and sensor cutouts on the bottom chin have no adhesive on the glass and have the tendency to collect a lot of dust from eg. having the phone in my pocket. Had to tear it off, because my front camera became very foggy and not sharp from all this dust
Lol 5d. What does that even mean, I get 3d signifies it curves. Time to release a 6d superior screen protector
ArctiX said:
Had this one. The adhesion is very nice, however the camera and sensor cutouts on the bottom chin have no adhesive on the glass and have the tendency to collect a lot of dust from eg. having the phone in my pocket. Had to tear it off, because my front camera became very foggy and not sharp from all this dust
Click to expand...
Click to collapse
After your post I actually noticed this hopefully they will do a all clear version
andril said:
After your post I actually noticed this hopefully they will do a all clear version
Click to expand...
Click to collapse
There actually is a clear version http://s.aliexpress.com/AJFRbQfI
It's called "amazing h+ pro", but I haven't tested it.
Just ordered a cheap one from ebay for 4€ and it's bad as expected.
So the nillkin is not good at all? My mi5 nillkin screen protector was awesome!
So which one should I buy?
i use this one and i am very satisfied... it's fit perfectly
purchased with phone on honorbuy
Can you share the link please
Sent from my Nexus 5 using XDA-Developers Legacy app
dahndahnbo said:
Can you share the link please
Sent from my Nexus 5 using XDA-Developers Legacy app
Click to expand...
Click to collapse
https://www.honorbuy.com/1228-full-...-screen-protector-for-xiaomi-mi-mix-2-2s.html
Thanks for your reply
Sent from my Nexus 5 using XDA-Developers Legacy app
ArctiX said:
There actually is a clear version http://s.aliexpress.com/AJFRbQfI
It's called "amazing h+ pro", but I haven't tested it.
Click to expand...
Click to collapse
I'm using this now, it is cheaper, but it not cover fully like the black border version.
zechs88 said:
I'm using this now, it is cheaper, but it not cover fully like the black border version.
Click to expand...
Click to collapse
Using this too.
Actually, i had the choice to get the one with the black border (that covers everything) and this one. But i still chose this because its nilkin, and its a trusted brand.
vince_junior said:
Using this too.
Actually, i had the choice to get the one with the black border (that covers everything) and this one. But i still chose this because its nilkin, and its a trusted brand.
Click to expand...
Click to collapse
Nillkin have the black border version too, named CP+
based on some user feedback, i believe it using hybrid materials, which screen area is still glass but black border is plastic like material, bendable
Hy
i have this more than 1 week... and it´s perfect fit to the screen sice...
https://tradingshenzhen.com/de/displayschutz/1272-xiaomi-mimix2s-nillkintg.html
hofi01 said:
Hy
i have this more than 1 week... and it´s perfect fit to the screen sice...
https://tradingshenzhen.com/de/displayschutz/1272-xiaomi-mimix2s-nillkintg.html
Click to expand...
Click to collapse
Any way you could picture it on the phone?
This one came in from Aliexpress Friday and it fits perfectly.
https://goo.gl/oaycHM
It's has full screen adhesive and there is a very thin black border, wasn't hard to line up, but that border has a lot thicker adhesive on it so its stuck to the curved edges of the glass really good.
Couldn't beat it for the price.
With case on
https://drive.google.com/file/d/1LBrEKrWmbCRgvWUTIqG7xnHIuB6yyV5t/view?usp=sharing
Case off closeup
https://drive.google.com/file/d/1GnQh7SVCxEllCpSOq3kBdOXQkaRoGMDX/view?usp=sharing
Screen on
https://drive.google.com/file/d/1-Dea11pedpUjtRkItdxBm9T2FgI06swY/view?usp=sharing