Related
Hi, I want to install Magisk but i got this error.
- Mounting /system, /vendor
! Cannot mount /vendor
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/Magisk-v16.0.zip'
Click to expand...
Click to collapse
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Harry0309 said:
Hi, I want to install Magisk but i got this error.
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Click to expand...
Click to collapse
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
Thanks! Helped change recovery.
This is weird because I was using this recovery earlier with magisk and everything was 100% fine.
Hi, I want to
Can someone will tell how to do it step by step procedures I am also facing sam
will tell how to do it step by step procedures I am also facing same issue device mido
@Sajag I flashed recovery with twrp with treble support.
Harry0309 said:
@Sajag I flashed recovery with twrp with treble support.
Click to expand...
Click to collapse
can you send me the link of twrp for treble builds??
Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
EDIT: Sorry, didn't realize you were on mido, and not cheeseburger. Ignore the above.
Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
For mido: https://drive.google.com/open?id=1zdgzjXssY3CFhdxmLeSR0AlqZQQyZ-7F
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Try a different rom/ or different twrp
Try other ROMs
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Sajag said:
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Click to expand...
Click to collapse
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Anil Jeenapati said:
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Click to expand...
Click to collapse
I am not sure . I flashed the latest version till now there are no new update . I think candy Os is a treble ROM try non treble rom
Using the treble supported TWRP fixed the vendor mount problem but I get into a bootloop when I try to install Magisk (latest version). I'm using the Havoc ROM (Android 8.1.0 - Treble Supported).
Edit: Got Magisk running by using a modified version for Treble.
Direct Link to the custom build of Magisk: Here
Source of the Link: LineageOS 15.1 by abhishek987
Flash this recovery, its for treble:
https://forum.xda-developers.com/re...covery-twrp-exclusive-3-2-1-5-treble-t3775081.
And flash Magisk 16.4 beta or higher
Same problem...
madbat99 said:
Try a different rom/ or different twrp
Click to expand...
Click to collapse
I also suffering that issue
Solution?
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hello I also installed the same ROM plus the Recovery of Red Wolf, remember that since its a treble you cannot mount vendor, but actually its easier than anything, why? cause the RR its based on Lineage OS and this last one is based on Cyanogen Mod, at the end what im trying to say its that the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Example of command with adb sideload: C:\Users\kaks\Downloads\adb\adb sideload "C:\Users\kaks\Downloads\adb\addonsu-15.1-arm64-signed.zip"
www . cyanogenmods.org / root-lineageos-15-1-android-oreo-rom /
Hope this work for you as it did for me
Kakashi171 said:
..the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Click to expand...
Click to collapse
OK, but can I then hide the "rooting" afterwards with Magisk?
HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
THANK YOU SO MUCH THAT HELPED!!
I JUST CHANGED RECOVERY NOTHING ELSE!
Hello mi6x user, here I share direct link last ROM 10.2.3.0 for Mi6x
This is China build android 8.1, flash with TWRP or Miui recovery. You can use this for bootloop device.
Download:
V 10.2.3.0.ODCCNXM:good:
may it help, thanks :victory:
Alvian_P said:
Hello mi6x user, here I share direct link last ROM 10.2.3.0 for Mi6x
This is China build android 8.1, flash with TWRP.
Download:
V 10.2.3.0.ODCCNXM:good:
may it help, thanks :victory:
Click to expand...
Click to collapse
is it possible to flash that being arb 4?
stevedat said:
is it possible to flash that being arb 4?
Click to expand...
Click to collapse
Yes. My phone also Arb4.
Alvian_P said:
Yes. My phone also Arb4.
Click to expand...
Click to collapse
After flashed this stable version via twrp, is it possible to flash miui dev zip via miui recovery of updater. especially miui pie beta dev and get rid of twrp, become a mi6x instead
stevedat said:
After flashed this stable version via twrp, is it possible to flash miui dev zip via miui recovery of updater. especially miui pie beta dev and get rid of twrp, become a mi6x instead
Click to expand...
Click to collapse
Is possible I think, before change to pie, make sure .zip file of pie must include kernel. I guess recommend flash via miui recovery / TWRP and wipe data. Because update different version of Android, 8.1 to 9.0
I never try Pie because my Arb=4. U can try, if bootloop you can flash this stable version again
Alvian_P said:
Hello mi6x user, here I share direct link last ROM 10.2.3.0 for Mi6x
This is China build android 8.1, flash with TWRP or Miui recovery. You can use this for bootloop device.
Download:
V 10.2.3.0.ODCCNXM:good:
may it help, thanks :victory:
Click to expand...
Click to collapse
Help, Do you have stock boot.img of this rom ?
Because my phone get bootloop when uninstal magisk.
Saud Salomo said:
Help, Do you have stock boot.img of this rom ?
Because my phone get bootloop when uninstal magisk.
Click to expand...
Click to collapse
Its include in .zip files
Seeing as someone finally created a forum with some relevance to miui does anyone know ruffly when xiaomi will be releasing stable update for miui 10 pie , because as we know the beta has arrived for many devs
Quantumkk123 said:
Seeing as someone finally created a forum with some relevance to miui does anyone know ruffly when xiaomi will be releasing stable update for miui 10 pie , because as we know the beta has arrived for many devs
Click to expand...
Click to collapse
There's a miui 10 v9.3.14 in the forum, I'm using it and everything is working fine, very smooth.
I have a mia2 converted to mi6x.. i had xiaomi. eu miui 10 and everything was fine.. i try to update to pie, delete firmware folder but i had bootloop.. so i flash it with firmware file and now i have arb4... in the past i had forgot to delete 1-2 times but arb was stayed at arb2... so.. if some moment i want fo go back to android one, is there a way to do it.. (only for warranty reasons, or to sell tbe phone)
ktlk21 said:
I have a mia2 converted to mi6x.. i had xiaomi. eu miui 10 and everything was fine.. i try to update to pie, delete firmware folder but i had bootloop.. so i flash it with firmware file and now i have arb4... in the past i had forgot to delete 1-2 times but arb was stayed at arb2... so.. if some moment i want fo go back to android one, is there a way to do it.. (only for warranty reasons, or to sell tbe phone)
Click to expand...
Click to collapse
Yes there is a way you need to wait for mi a2 to release an arb 4 rom only way
What will be ARB level after installing this MIUI 10.2.3 or 10.2.5 ODCCNXM ROM?
Currently I have MIUI stable stock ROM 9.6.6.0. If I upgrade it to 10.2.5.0, than can I downgrade to MIUI stable 9.6.60 again?
Thanks
coolman7 said:
What will be ARB level after installing this MIUI 10.2.3 or 10.2.5 ODCCNXM ROM?
Currently I have MIUI stable stock ROM 9.6.6.0. If I upgrade it to 10.2.5.0, than can I downgrade to MIUI stable 9.6.60 again?
Thanks
Click to expand...
Click to collapse
Yeah
---------- Post added at 08:43 PM ---------- Previous post was at 08:43 PM ----------
Quantumkk123 said:
Yeah
Click to expand...
Click to collapse
Oh wait no lol because of arb 4
Quantumkk123 said:
Yeah
---------- Post added at 08:43 PM ---------- Previous post was at 08:43 PM ----------
Oh wait no lol because of arb 4
Click to expand...
Click to collapse
My current ARB level is 4 with MIUI 9.6.6. Will I get brick if I will downgrade from 10.2.5 to 9.6.6?
ktlk21 said:
I have a mia2 converted to mi6x.. i had xiaomi. eu miui 10 and everything was fine.. i try to update to pie, delete firmware folder but i had bootloop.. so i flash it with firmware file and now i have arb4... in the past i had forgot to delete 1-2 times but arb was stayed at arb2... so.. if some moment i want fo go back to android one, is there a way to do it.. (only for warranty reasons, or to sell tbe phone)
Click to expand...
Click to collapse
You can I found the method in a Russian website, but the Bootloader will remains on 6X. But technically you can install AndroidONE again, btw for updating you need to use alternative ways. ( Due to the 6X Bootloader)
Are there any TWRP that can decrypt storage of MIUI 10.2.5 stock China ROM?
coolman7 said:
Are there any TWRP that can decrypt storage of MIUI 10.2.5 stock China ROM?
Click to expand...
Click to collapse
Format data on twrp
Alvian_P said:
Format data on twrp
Click to expand...
Click to collapse
I tried but did not help. When I reboot system, MIUI 10 formats storage with encryption again. I tried following scenarios:
1) Opened TWRP and format data. Reboot system
2) Opened TWRP and format data. Reboot to TWRP again. Reboot to system
3) Opened TWRP and format data. Reboot to TWRP again. Flash magisk. Reboot to system
All has same affect. and TWRP asks password again and again.
coolman7 said:
I tried but did not help. When I reboot system, MIUI 10 formats storage with encryption again. I tried following scenarios:
1) Opened TWRP and format data. Reboot system
2) Opened TWRP and format data. Reboot to TWRP again. Reboot to system
3) Opened TWRP and format data. Reboot to TWRP again. Flash magisk. Reboot to system
All has same affect. and TWRP asks password again and again.
Click to expand...
Click to collapse
Your Data partition can mount in TWRP?
if TWRP ask password, probably because install TWRP with active password lockscreen in system. When install recovery make sure deactive lockscreen pasword first
Try this recovery: https://sourceforge.net/projects/pitchblack-twrp/files/wayne/
Alvian_P said:
Your Data partition can mount in TWRP?
if TWRP ask password, probably because install TWRP with active password lockscreen in system. When install recovery make sure deactive lockscreen pasword first
Try this recovery: https://sourceforge.net/projects/pitchblack-twrp/files/wayne/
Click to expand...
Click to collapse
I can't mount data partition in TWRP. TWRP asks for password. I did not flash TWRP. I just boot TWRP from fastboot when I need with fastboot boot twrp.img command. I tried pitchblack recovery but the result is same.
{Mod edit}
All sources gonna be linked here within two days
We will share all ours sources for team win as contribution to development on XDA
SOURCES: SOON
Is Decrypt working in oxygen os with this recovery?
Jackass94 said:
Is Decrypt working in oxygen os with this recovery?
Click to expand...
Click to collapse
No, sorry. Its still work in progress. Decryption is working only on custom roms for now
Does this TWRP stick once flashed, or device defaults back to stock recovery once flashing is over?
elmor0 said:
Does this TWRP stick once flashed, or device defaults back to stock recovery once flashing is over?
Click to expand...
Click to collapse
Depends on what your flashing
Custom ROMs
I will install in OOs Stock 10.0.8... Thanks.
jotha.dx said:
I will install in OOs Stock 10.0.8... Thanks.
Click to expand...
Click to collapse
It doesnt work with stock OOS AFAIK
EugenStanis said:
It doesnt work with stock OOS AFAIK
Click to expand...
Click to collapse
Afh... Thank you... I won't even try then....
Sent from my OnePlus7TPro Global using XDA Labs
I am waiting the custom oos
ricky886 said:
I am waiting the custom oos
Click to expand...
Click to collapse
What is that supposed to mean?
this doesn't decrypt SDcard aka "Data" iam on Resurrection remix any solution? i want to remove a magisk module that caused a bootloop
mastrok said:
this doesn't decrypt SDcard aka "Data" iam on Resurrection remix any solution? i want to remove a magisk module that caused a bootloop
Click to expand...
Click to collapse
Use the stock recovery with adb shell enabled.
Or flash the stock boot.img, enable adb debugging and flash the Magisk patched boot.img.
If adb debugging is enabled skip the upper part, use a PC and enter:
Code:
adb wait-for-device shell magisk --remove-modules
Done.
mastrok said:
this doesn't decrypt SDcard aka "Data" iam on Resurrection remix any solution? i want to remove a magisk module that caused a bootloop
Click to expand...
Click to collapse
alright i needed to have working system for this to decrypt. i installed the stock boot image system worked. then restarted now it decrypts
i can confirm this really works like back in the days when i used it in samsung galaxies
I van confirm that this works. It's installed and I made a backup with it. Nice work!!
EugenStanis said:
It doesnt work with stock OOS AFAIK
Click to expand...
Click to collapse
It does work
I have flashed the OOS 10.0.8 BA on OnePlus 7T PRO
I have cleared the phone with TOOL ALL IN ONE
I was in a bootloop when I have flashed the stock image
Then I have tried to wipe cache/data and it hasn't worked
Then I have made a full wipe through TOOL ALL IN ONE
In a magical way its worked. But I would like to test it to see what are the full steps to make it work. But I am sure that this has worked and I have now an operated Oneplus 7t Pro.
I think that its something about having 2 different OS in one smartphone and you have to clear it to delete the old.
But It is working
Alexisd1 said:
It does work
I have flashed the OOS 10.0.8 BA on OnePlus 7T PRO
I have cleared the phone with TOOL ALL IN ONE
I was in a bootloop when I have flashed the stock image
Then I have tried to wipe cache/data and it hasn't worked
Then I have made a full wipe through TOOL ALL IN ONE
In a magical way its worked. But I would like to test it to see what are the full steps to make it work. But I am sure that this has worked and I have now an operated Oneplus 7t Pro.
I think that its something about having 2 different OS in one smartphone and you have to clear it to delete the old.
But It is working
Click to expand...
Click to collapse
It DOES WORK but decryption is not working so it is useless
EugenStanis said:
It DOES WORK but decryption is not working so it is useless
Click to expand...
Click to collapse
Decryption isnt working in any TWRP right now. The official TWRP when will be out( I dont know when) it will have decryption. But in this TWRP i am focusing to the way of installing a stock OOS.You can just simply boot the twrp and not flash it. After flashing the stock OOS you can use the stock recovery that will be encrypted and you will not have any problem. Now we have these solutions or the harder solutions like flashing with adb commands etc.
Alexisd1 said:
Decryption isnt working in any TWRP right now. The official TWRP when will be out( I dont know when) it will have decryption. But in this TWRP i am focusing to the way of installing a stock OOS.You can just simply boot the twrp and not flash it. After flashing the stock OOS you can use the stock recovery that will be encrypted and you will not have any problem. Now we have these solutions or the harder solutions like flashing with adb commands etc.
Click to expand...
Click to collapse
You are wrong, decrpytion is working for me on this TWRP.
Hi,
I tried to install custom rom on my k20 pro but it's shows error everytime . Error 7 and after that know it's showing error 6 had installed orange fox recovery.
Tried corvus and evolution x both are showing the same thing error.
I don't know what is wrong am I missing something,
Now I flashed stock rom again. Because of the problem. Tried fixing error 7 and know I am getting error 6 and know if I try other rom is showing me the same thing error 6 .
Know I have flashed 12.0.2. after so many failed attempt.
what is your twrp version?
Maybe mount system and vendor before flashing.
Mi 9T Pro ll Tapatalk
Tried orange fox latest r11, and tried sky hawk also but same.
On twrp it's not installing properly don't know why,
Any help on what to do and what is this error 7 and 6 I am getting while flashing
kibria.mgk said:
Maybe mount system and vendor before flashing.
Mi 9T Pro ll Tapatalk
Click to expand...
Click to collapse
Before wipeing the vendor ??
Can you tell me in detail to mount and flash
SSfalcon said:
Before wipeing the vendor ??
Can you tell me in detail to mount and flash
Click to expand...
Click to collapse
Before flashing the rom
Mi 9T Pro ll Tapatalk
Install TWRP 3.4.0-0 from here, then try installing a ROM again.
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
SSfalcon said:
Hi,
I tried to install custom rom on my k20 pro but it's shows error everytime . Error 7 and after that know it's showing error 6 had installed orange fox recovery.
Tried corvus and evolution x both are showing the same thing error.
I don't know what is wrong am I missing something,
Now I flashed stock rom again. Because of the problem. Tried fixing error 7 and know I am getting error 6 and know if I try other rom is showing me the same thing error 6 .
Know I have flashed 12.0.2. after so many failed attempt.
Click to expand...
Click to collapse
Did you flash vendor zip before flashing custom rom like evolution x?
ishten said:
Did you flash vendor zip before flashing custom rom like evolution x?
Click to expand...
Click to collapse
I am on miui 12.0.2,
Still I need to update or flash vendor/ firmware ??
Robbo.5000 said:
Install TWRP 3.4.0-0 from here, then try installing a ROM again.
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
Click to expand...
Click to collapse
Ok will try once on this twrp.
Can you tell me are you using the latest twrp and are you facing any error or anything..
SSfalcon said:
Ok will try once on this twrp.
Can you tell me are you using the latest twrp and are you facing any error or anything..
Click to expand...
Click to collapse
I've been using mauronofrio's TWRP on this phone for over a year and never had any problems with it when flashing ROMs. I've recently updated TWRP to the latest 3.4.0-0 and had no problems flashing LOS.
There is one bug that has never been fixed. Sometimes when you boot into TWRP it does not recognise any touch on the screen. Just turn the display off and on again with the power button and it works fine after that.
SSfalcon said:
I am on miui 12.0.2,
Still I need to update or flash vendor/ firmware ??
Click to expand...
Click to collapse
1. Use orangefox recovery. (Recommended)
2. Flash vendor zip if you want to use custom roms.
URL: https://downloads.akhilnarang.dev/M...al-V12.0.2.0.QFKINXM-10.0-vendor-firmware.zip
Download zip using above link,
3. Flash using Orange Fox recovery
4. Flash custom rom.
5. Finally flash Disable DM variety
URL: https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
ishten said:
1. Use orangefox recovery. (Recommended)
2. Flash vendor zip if you want to use custom roms.
URL: https://downloads.akhilnarang.dev/M...al-V12.0.2.0.QFKINXM-10.0-vendor-firmware.zip
Download zip using above link,
3. Flash using Orange Fox recovery
4. Flash custom rom.
5. Finally flash Disable DM variety
URL: https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Click to expand...
Click to collapse
I am MIUI 12.0.2 Stable india, still do I need to flash the vendor zip ??
And why I am on the lastest miui 12 right ??
ishten said:
1. Use orangefox recovery. (Recommended)
2. Flash vendor zip if you want to use custom roms.
URL: https://downloads.akhilnarang.dev/M...al-V12.0.2.0.QFKINXM-10.0-vendor-firmware.zip
Download zip using above link,
3. Flash using Orange Fox recovery
4. Flash custom rom.
5. Finally flash Disable DM variety
URL: https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Click to expand...
Click to collapse
SSfalcon said:
I am MIUI 12.0.2 Stable india, still do I need to flash the vendor zip ??
And why I am on the lastest miui 12 right ??
Click to expand...
Click to collapse
The TWRP I've pointed you to is the better option. Orange Fox is only good for installing if you plan to stick with MIUI.
There is absolutely no need to flash DM Verify, or a DFE script.
You will not need to flash firmware and vendor files if coming from the latest MIUI 12.
SSfalcon said:
I am MIUI 12.0.2 Stable india, still do I need to flash the vendor zip ??
And why I am on the lastest miui 12 right ??
Click to expand...
Click to collapse
If your indian why dont you watch one of the million videos in your language on youtube that show you how to flash?
Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally without deleting any of my data, but does not enter twrp either. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition' and some other errors. I think that version is too old for my rom, so I'm afraid to use it for backup/flash. My phone is LG G6 H870, Android 9, software version V30b. The phone is not rooted, the bootloader is unlocked. Tried to erase cache partition and install twrp 3.4.01 again, didn't work. I can't install Skyhawk or Orangefox becuase I can't use twrp.
Is anybody facing this problem too?
Thanks!
Bootloader unlocked?
Mendoo said:
Bootloader unlocked?
Click to expand...
Click to collapse
Yes
Thelock1 said:
Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition', I think that version is too old for my rom. My phone is LG G6 H870, Android 9, software version V30b. My phone is not rooted.
Is anybody facing this problem too?
Thanks!
Click to expand...
Click to collapse
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
jis251 said:
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
Click to expand...
Click to collapse
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Thelock1 said:
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Click to expand...
Click to collapse
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
jis251 said:
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
Click to expand...
Click to collapse
Ok, thanks, I'll try to find a solution, or maybe I'll just wait for the next version of twrp.
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
AlejandroMota said:
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
Click to expand...
Click to collapse
Yes, I know I have to install twrp again every time I let the stock rom boot, but the only version of twrp working is 3.2.3 and I think that was released before the G6 received official Android 9 update, so that's why I'm not very confident using it. I've tried to enter recovery immediately after I've installed it, so I don't think that's the problem.
I have the same problem on the LG G6 H870. I won't get to TWRP. I tried several versions of TWRP and nothing.
Edit.
This twrp is functional:
https://androidfilehost.com/?w=files&flid=289997
After installation using fastboot, restart directly to twrp using power+vol. down.
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Update TWRP 3.1 to 3.4 problem
Thelock1 said:
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Click to expand...
Click to collapse
Hi, I don't know if this goes here, I hope you can help me, I update twrp from version 3.1 to 3.4 and now I can't access twrp, how can I fix it?
Hello again, I answer myself, and if it helps someone else, using adb fastboot with twrp 3.2 Melina solves it and twrp works perfectly again.