Has anybody else have the fingerprint button raised after a few months of use? I want to remember that mine was flush with the rest of the screen if not a tiny bit lower but not quite as low like in the P10.
The lower part is still flush on mine but the upper part has raised and i can clearly feel a sharp edge on the glass around the "button" and if i drag a fingernail along the edge i can feel the nail almost going under the glass edge.
So i'll probably claim warranty on it but wanted to see if anybody else has this.
Mine has always felt a fraction of a millimeter raised, though evenly all around the edges. Never felt like it wasn't part of the design.
Yeah, the bottom part of the "button" feels just like you describe it, the sides and top however are raised and i can actually feel the sharp glass edge.
An update on this, i claimed warranty on this last week and received my phone back yesterday, i received a new front glass and they also put a new back glass on it, the back glass had no issues at all.
Parts list attached.
Related
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
i know how you feel! i bought them when i got my hd2 and i got the top two-thirds of the protector on perfect but then the bottom third somehow got dust underneath, it really not that bad when the screen is on but its still annoying. cant wait to get my invisibleshield on it tho!
order this, the maximum protection from zagg....
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
I used invisishield on my ipod. Great stuff, but hard to get on perfect. 3 parts for a curved back and front only covers the LCD part? The front part sounds so unlike them. They normally have it going round buttons and everything.
But it's like putting tint on. You need to have a liquid to make slide just right.
i used invisible shield on my iphone, and it was fully protected. It did add grip to the device which i liked. Anyways, the maximum protection shield covered more than the normal full-body shield. It'll cover not only the LCD screen but all spaces around the hardware buttons and well as the speaker.
starstreak said:
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
Click to expand...
Click to collapse
I also got these same screen protectors and was dissapointed when it did not cover the entire screen.
Trick to putting on screen protectors.
1.) Make sure the screen is completely clean of all smudges etc.
2.) Use a can of air duster to remove any small dust particles that might be stuck on the phone. If you don't have that then just take a piece of tape and remove any dust particles or dirt from the screen. This is the most important part!
3.) Line up the screen protector on the screen where you want to place it.
4.) Peel back the backing of the screen protector as you lay the screen on the device. Start from the top of the device and work your way down. If need be take out a credit card or another hard piece of plastic of some sort to push out any air bubbles that may occur as you lay down the screen protector.'
5.) Enjoy a job well done.
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
My TMOUS HDC HD2 is definitely glass.
I didn't bother to use a screen protector (didn't even know there was one supplied)...it isn't necessary on a glass screen.
Its very hard to scratch glass...you would need a very sharp object, made out of a very hard material (harder than glass), applied with a lot of pressure. I've had my iPhone for 3 years, and the glass is flawless on it. The aluminum housing is scratched, dented, and dinged up, and the LCD panel has a little bit of bruising on the top left corner BEHIND the glass...but the glass itself is immaculate.
Apple actually pulled the screen protectors off the shelves from the Apple store because they felt they were unnecessary..and frankly anyone who pays for one on the HD2 or iPhone wasted their money.
You'll actually see more imperfections on the screen by applying a screen protector...they have a tendency to attract dust, bubble up, and flat out get dirty. The only maintenance you need to do on a glass screen is polish out smudges and finger prints.
The biggest peril to glass touch screens is cracks from falls....and if your HD2 suffers a big enough impact, a screen protector or 'invisible shield' won't do squat to keep it from cracking
glass or plastic..either way.. i was soooooooooooo confident i wouldnt scratch mine, until about a minute ago when i was in the process of wiping the glass(plastic) screen before putting on a screen protector, i noticed a little scratch...great. Should've put on a protector sooner...
From now on, I willl be putting on a screen protector unless the screen are made out of crystal sapphire or something..
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
We actually do not get an included screen protector. Only the black gel case, which imo is quite crappy... loose and flimsy
http://forum.xda-developers.com/showthread.php?p=6117793#post6117793 Check out oy instillation of the Invisible shield if you are considering buying one. I bought the Maximum Protection and it covers almost everything besides for around the buttons on the bottom, volume rocker, camera, Micro USB/ 3.5 Headphone jack, and the finger nail grove on battery cover. I also would like to note that my TMOUS HD2 did not include any screen protectors in the box.
Sorry imo I have to disagree with you about the included gel being loose mine fits quite snugly and until my zagg comes in I prefer to keep it in the gel...not as slick & keeps the screen(when face down) off the flat surface.
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
MAMeingast said:
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
Click to expand...
Click to collapse
I agree, I used to do this back in the day before Zagg came around. It works great.
I have read with other products people use a drop or water/soap water before applying a screen protector. Has anyone used this method on this device? i am concerned that the water will somehow ruin the device. I know it's only a drop or 2 but wanted to get some feedback first before i tried it.
How is the glass fit for everyone elses z3c? There is a decent size gap between the glass and plastic on the top side of my z3c, enough to where i can noticeably see dust and other material in the gap.
Am i alone? Is this a wide spread issue? It really takes away from the premium feel of the phone to see all this dust & crap between the glass and plastic :\. Will post up some pictures if they can make out anything.
It's not very noticeable for me, but there are smalls gaps all around the glass rear and front. It's not very visible on the black version, but I can see some debris stuck in there under bright light. I can also feel the gap with my nail. I have the impression that the bottom gap (backside) is a bit larger than the top gap. My previous phone, Xperia Acro S, had no gap around the glass whatsoever.
jug6ernaut said:
How is the glass fit for everyone elses z3c? There is a decent size gap between the glass and plastic on the top side of my z3c, enough to where i can noticeably see dust and other material in the gap.
Am i alone? Is this a wide spread issue? It really takes away from the premium feel of the phone to see all this dust & crap between the glass and plastic :\. Will post up some pictures if they can make out anything.
Click to expand...
Click to collapse
My first one - black - had this pretty bad so I sent it back. I got a different colour instead - red/orange - so any dust collecting would hopefully be less noticeable, but the gap is actually less in this replacement. There's only a small one at the top of the front glass now.
So I think the cut of their glass panels is maybe not as precise as it should be and there is a bit of variance. But most people will have gaps of varying degrees I think..
withoutwings said:
My first one - black - had this pretty bad so I sent it back. I got a different colour instead - red/orange - so any dust collecting would hopefully be less noticeable, but the gap is actually less in this replacement. There's only a small one at the top of the front glass now.
So I think the cut of their glass panels is maybe not as precise as it should be and there is a bit of variance. But most people will have gaps of varying degrees I think..
Click to expand...
Click to collapse
If you feel on the left and right sides with you finger nail, can you feel your nail "drop" a little bit between the glass and plastic, with the replacement unit?
degraaff said:
If you feel on the left and right sides with you finger nail, can you feel your nail "drop" a little bit between the glass and plastic, with the replacement unit?
Click to expand...
Click to collapse
Maybe just, but it's not enough for dust to get in any more. Only at the top now is the gap large-enough for dust.
withoutwings said:
Maybe just, but it's not enough for dust to get in any more. Only at the top now is the gap large-enough for dust.
Click to expand...
Click to collapse
Ah, sounds like how it is for mine. I think they all have this to some degree. I wonder if Sony has a technical reason for the gaps?
Going to return my z3c and get another one which will hopefully have a better fitting screen. The spacing between the plastic band around the screen and the "translucent plastic" is also big enough where debris gotten stuck in it. Very disappointing.
jug6ernaut said:
Going to return my z3c and get another one which will hopefully have a better fitting screen. The spacing between the plastic band around the screen and the "translucent plastic" is also big enough where debris gotten stuck in it. Very disappointing.
Click to expand...
Click to collapse
That spacing is always going to be there I think. Well it's not actually a spacing, it's just because the finish between the plastic band and the translucent sides is not a flush finish. This is just the design of the phone. It does catch some small debris on mine as well, but it's relatively easy to remove.
At least you can wash your phone if it gets too dusty.
Just don't do it under running tap water.
degraaff said:
That spacing is always going to be there I think. Well it's not actually a spacing, it's just because the finish between the plastic band and the translucent sides is not a flush finish. This is just the design of the phone. It does catch some small debris on mine as well, but it's relatively easy to remove.
Click to expand...
Click to collapse
This is not the spacing i'm referring to. I talking about between the glass and the plastic. It definitely is not apart of the design of hte phone, as the right left and bottom edges are almost perfectly flush.
jug6ernaut said:
This is not the spacing i'm referring to. I talking about between the glass and the plastic. It definitely is not apart of the design of hte phone, as the right left and bottom edges are almost perfectly flush.
Click to expand...
Click to collapse
"The spacing between the plastic band around the screen and the "translucent plastic" is also big enough where debris gotten stuck in it."
That is the part my reply was about.
degraaff said:
"The spacing between the plastic band around the screen and the "translucent plastic" is also big enough where debris gotten stuck in it."
That is the part my reply was about.
Click to expand...
Click to collapse
Ah gotcha. Yeah that spacing is disappointing but i'm "ok" with it. The glass spacing on the other hand i'm not ok with.
also mine has the gap in the left part,the right part its perfect
as you said probably the screen its not fit perfect,but for me its ok because i only see it if i look carefully.
I think it could actually be a safety measurement: if the phone falls and hits the ground with that plastic rim, the relatively small gap could prevent the impact from being directly transferred onto the glass.
degraaff said:
I think it could actually be a safety measurement: if the phone falls and hits the ground with that plastic rim, the relatively small gap could prevent the impact from being directly transferred onto the glass.
Click to expand...
Click to collapse
I could believe that if it was the same gal on top and bottom, front and back. But it's not, it's only front top.
I know most of us (if not all) keep looking for that perfect tempered glass screen protector for our phones (not to mention that it has to be curved of course).
Today I received my Skinomi Samsung Galaxy S6 Edge tempered glass screen protector, and I'd be more than happy in sharing my review of the product.
Packaging:
Packaging is retail. I pre-ordered from their website directly (rather not deal with Amazon), and I got a cool coupon that saved me 25% .
What comes included is your screen protector, fiber cloth, alcohol cleaning cloth and dust lifter screen.
Installation:
I'm going to be completely honest here; This is my first time installing a tempered glass screen protector. Much less a dry installation. I've always used invisible shield for my previous devices so I was expecting a hassle. This was by far the easiest installation I've ever done. Super easy!
Fit:
The fit is not as great as I'd expect it to be. It doesn't cover the phone fully on the edges, you can still see some small space that's left uncovered (I've attached pictures for your leisure). I'm sure that I've installed it as best as humanely possible (actually quite proud of that haha).
The capacitive buttons on the bottom or probably my main issue; The cover completely warps them. The cutouts on the glass protector don't match the cutouts on the phone itself. This causes the buttons to look weird and warped when they light up. I personally don't care (now if this is a mistake and someone from Skinomi is reading this, then please reach out!), the case does what it's supposed to do, but I feel that it makes the fact you have a glass protector on your phone obvious.
Feel:
The protector feels great, you really can't tell there's something on top of your screen. Touch sensibility is weird around the middle towards the left edge on my particular protector (I do have to press slightly harder in order to get a response), but I'm having that after 24 hours that problem clears out.
Final thoughts:
I actually like the protector overall. It's not bad for the price I payed (although I was expecting a better fit for the buttons and a better fit around the screen itself). I'm guessing that as long as the screen protector doesn't come off like the Spigen one I would consider myself happy.
I know the pictures are not the greatest, but If you guys want better ones or different angles or something just let me know!
Hope this helps!
Are those glittery specks permanent?
Graffiti Exploit said:
Are those glittery specks permanent?
Click to expand...
Click to collapse
Yes they are.
I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk
Mikeonic said:
I own this as well. My personal take on this is 7/10. Only thing that bothers me is the edges.... How they aren't as sensitive
Sent from my SM-G925A using Tapatalk
Click to expand...
Click to collapse
Exactly my thoughts. If the edges were more sensitive, I wouldn't care about the rest.
I'm very impressed with this tempered glass. SGP use to be my favorite for all my devices but I'll start considering Skinomi tempered glass going forward.
There are some sensitivity issues on the left side but hopefully that will go away once the glass settles in and will report back if it does or doesn't go away later in the week. What I mean is that I would have to press harder than normal.
Here is a pic with the glass before installation. I just realized I still had the clear plastic covering my lens after I took this picture and will add a few more pictures with it being installed once I borrow a colleagues camera phone.
It looks so beautiful once installed and no bubbles like the SGP curved one. TBH, hyped went away once I started to get sensitivity issues on the left hand side and hopefully it will go away after a few days.
EDIT: after re-aligning the glass, I don't have any sensitivity issues anymore. You might have to re-aligning it a few times if you're off. Don't worry, you won't lose any stickyness. This tempered glass is worth buying IMHO.
So after going through many TGSPs and finding pretty much all of them terrible, I found a off-the-wall solution that seems to tic off all of the major check marks for me:
Smooth glass-like surface
Great touchscreen sensitivity
Great optical clarity
Won't peel off (obviously)
Turns out, it's not just one solution, but a combination of two different screen protectors used in conjunction. This might be a long post but stay with me here.
First thing I tried long ago was the wet-apply TPU stuff from IQ-Shield. It's actually a great product if you put it on properly and is fairly inexpensive. The application might be a pain for some (I didn't mind it so much). But I'd always hated the texture and tackiness of the surface. Also, it's aways a bit sharp at the edges that it bothered me to hold it. And strangely, these are easy to scratch. The scratches really show on them too. They're also smudge magnet and look terrible unless thoroughly clean.
Then I tried all of the major TGSPs on the market (GPEL, ZAGG, AmazingThing and a few cheaper stuff) and while many of them looked great, the glare and touchscreen sensitivity was always anywhere between inadequate to terrible.
Then I looked in this PET(I think?) plastic stuff from G-Color
https://www.amazon.com/dp/B01FTUB74S..._t1_B01FTUB74I
Turns out this stuff is pretty great. It honestly feels as smooth as glass. Looks like glass. Screen sensitivity was awesome. clarity was amazing. I can also atest to it durability as well. I'd been moving my futon around a bit and had the phone perched on the the backrest. The phone fell onto the metal frame of the futon, glassface first. the impact messed up the screen protector and it got warped at the impact site, but the phone glass was fine. Great start so I ordered another immediately.
But low and behold, after another two weeks or so of usage, the edge began to lift. Turns out the silicone adhesive, which works fine on flat glass, doesn't do so well with curved glass long term.
Disappointed, I thought about ways of giving it extra adhesion then I remembered that the TPU stuff is very tacky. So I washed and re-applied (wet) the IQ-Shield stuff. I let it set until all the air and water bubbles disappeared (about two days). Then I washed the G-Color piece (it had lint and dust stuck on it). I applied that one wet as well (yes you can apply PET protectors wet) right on top of the IQ-Shield. Gave it another few ways days to set and the bubbles disappeared. I was astonished by the results. I got all of the things I was look for above. I tried force peeling the edge off and I was very surprised how hard it was to do. I gave it three weeks and it had been flawless.
I went and bought another G-Color piece (this time in white). Of course taking the first (gold) one off you probably have to reapply the TPU one underneath. A second round of thorough washing and reapplying the IQ-Shield (I didn't have to buy a new one. As long as you wash it correctly with dish soap and are careful, you can reuse them). Once again, let it set over a couple of days.
Since it was the first time I applied the new G-Color piece, I applied it dry as instructed on package. You'd only need to apply the PET stuff wet if you're reapplying for second time after washing. The first time should be dry using the guide stickers. The results were similar (maybe a bit better since I was using a brand new G-Color piece). It's been a month and a half now. Flawless. Well almost: Since I applied the G-Color with white bezel over a black phone, its white part is not as bright-white as it could be. More like a white-grey, but unless you butt it up to another white phone, you won't notice. The gold one looks completely gold.
So now I have a phone protected by two layers. The two layers together are also a bit thinner than a single TGSP. It looks completely like glass and I've been amazed how scratched resistant it has been. They're also smudge and fingerprint resistent.
Another check mark that might matter to some, but not me: Case-friendliness. Those that have such cases, this might not work so well since this goes pretty close to the edge of the glass. It does leave about a .5mm around the edge. I personally would have liked it to go all the way to the edge but I don't know how that would effect the adhesion. None of my cases wrap around the edge of the glass so it never affected me at all.
Hope this helps someone.
Tip: When applying wet after washing with dish soap, try not to completly wash off the dish soap. A bit of dish soap remaining will help you with positioning the protector since it will allow you to slide it around a bit. Once you're in position, pressing down (especially around the home button, ear speaker and camera cut-outs) will hold it in place while you squeegy the remaining water out. I like to use my finger and roll it to push water out. Try not to slide you finger across the surface as it might catch and pull the protector out of position. Don't worry about air or water bubbles too much. They will slowly disappear over a few days.
https://goo.gl/photos/ztPVFEuUUCoPqJrZ7
https://goo.gl/photos/TRpAhb6a5gtFmp6r7
Thanks for those VERY complete tips, I shall follow your guidelines reapplying my TGSP!
Just curious how your solution is holding up. I just bought an S7 edge, so I'm in the market for a good screen protection solution. This sounds like a pain, but it also sounds like it may just be worth it!
TIA!
Some days ago I was given the opportunity by @Guru from PhantomSkinz, a company based in the USA, to review their phoneskin/full body protector for the Oneplus 5T. Because I'm living in Europe, I had to pay the shippingcosts myself. This was something around 12usd. Yesterday I received the skins and today I applied them to my 5T.
One the website I had choosen the ultraclear skin with stretch-guard technology. This strech-guard technology protects the phone extra form sudden impact like when the phone falls on the ground. Guru also added the snake skin which also had my attention, so that one is for later to try.
PACKAGING
The product itself comes nicely packed.
The package comes with:
- screenprotectors (2x)
- back filmprotector
- microfiber cloth
- application spray
Here are some pictures of the filmprotectors which came in my package.
Screenprotectors:
Back filmprotector
Snakeskin
As you can see on the picture of the Snakeskin, it's quite textured, so it should add some extra grip. But Guru told the the clear protector properly would add some more grip. And I guess it does.
INSTALLATION
On their website there is an instuctionvideo of how the skin can be applies to the phone. It's quite an easy process. You thouroughly clean you screen, put some spray on the screen, put some spray on the back of the protector and apply it to the screen, make shure it fits properly and then remove gently the water using a (credit)card or any other card wrapped inside the microfiber cloth. There is really not much else to it.
I first applied the screenprotector. After applying it I freaked out a bit, the screen wasn't as clear as in the instructionvideo. Not even close. There were a lot of spots and smudges under the screenprotector. Had I done something wrong???
After a few seconds I remembered I had this once before with an other screenprotector on an other phone. I remembered the smudges and spots disappeared after time. One hour later, the smudges and spots were not as severe as they used to be in the beginnen. There are still some spots on the screen, but I guess they will go away after some time.
So after applying the front it was time to apply the back. Same procedure.
One thing I noticed was that the ultra clear protector doesn't have protection for the side of the phone, where the Snakeskin does have side protection. I'm not shure why this is the case, but I guess it hase something to do with thickness of the ultraclear protector because of the stretch-guard technology. Not every skin has this protection. But still, when the phone falls on the ground and it falls on its side, then there is no protection there... On the top, bottom and corners there is the extra protection. And man oh man oh man, those cutouts are precise!!! Haven't had a protector before with such precise cutouts. Maybe around the camera it's a bit too precise, because next to the camera bump there stays a tiny little airbubble. At this time I can't get this air bubble to go away. I rub it away with the microfiber cloth but after some time it there again. Time will tell. For the camera glass itself there is also a protection film. It was a bit of a struggle to peel of the protectionfilm that was sticking on it, but I managed to get it off.. Make shure you have some nails to peel it of
As you can properly see on the picture, there where the 5T logo is, there are many tiny airbubbles. Let's hope these will also go away after time.
The days after
Looks like all the bubbles are going away.
All that there is left are some tiny airbubbles of which I hope they will also disappear over time.
The 5T logo is still not looking very nice, but let's hope this will also get better over time
All the bubble are gone now. Only at the camera bumb there is some air under the film, and at the 5T logo there is some air left. Not really a big deal. I guess the cutout of the camera is just a little bit too tight. I'll see what I can do with a hair dryer.
DAILY USE
I've been using the phone with the full body skin for almost a day now. It feels like the skin is getting/feeling/looking better after some time.
Like mentioned before, the responsiveness is just great. The screenprotector also feels great when swiping with the fingers or typing.
The grip is actually quite amazing. When holding the phone in the hand after a few seconds it feels like the phone is sticking to the fingers on the back of the phone. It feels really grippy at that point.
Yesterday I said the thing was a fingerprint magnet. Today it doen't feel like that anymore. Fingerprints are still visible, but not really worse compared to other screenprotectors. Sometimes it feels like there are a lot of fingerprints, and other moments I feel like there are hardly any fingerprints. But if there are fingerprints and smudges, then they can be wiped off quite easily.
CONCLUSION
So there you have it. Overall I think this can be an amazing screen/full body protection for the phone. There are still some tiny airbubbles underneath the skin, but I expect them to disappear in the upcoming days. For now this skin feels like an actual winner. There are hardly any negative points I can think of. The biggest 'mistake' is that there is the clear skin doesn't wrap the sides of the phone. I'll have to ask @Guru or the customersupport why this is the case. But overall, it looks en feels great.
+ The skin really is ultraclear, so you preserve the beautifull looks of the phone
+ The ultraclear protector actually adds some extra grip. I have to find out over time if it's enough for me.
+ The cutouts are amazingly precise. Haven't seen this precize before (already tried, dbrand, skinnova and slickwraps on different phones)
+ Applying the skin is quite ease. Just take your time.
+ The ultraclear protector has self healing technology, so if it scratched, it fills up the scratch itself.
+ Responsiveness of the screen isn't affected.
+ No rainbow effect or whatsoever like seen on many glass protectors.
+ Fingerprints and smudges can be wiped off easily
- There is no cutout for the front camera, time will tell if this is a problem with taking pictures, face recognition seems to work without any problems.
- With the ultraclear protector there is no side protection.
- Fingerprints visible.
- Around the camerebump the protector seems to be a tiny bit too tight
Ps, you can probably tell English is not my native language. If you have any tips on how to correct some spelling/grammar mistakes, please send me a PM. Any other questions can be asked here in this topic.
Can you post after images please