Database Develop

Unbrick lg lte 2 f160 lsk qhsusb_dload no recovery no download mode

I brick my lg f160k while flashing wrong kdz on it. It was in no download no recovery mode. Pc was showing qhsusb_dloade 9008. I searched alot over the internet to unbrick it but found nothing except a thread on veitnam site by a veitnamis developer. Thanks to him for this useful thread. With the help of this i unbrick my cell. It was very difficult to understand the thread while in Vietnam's language but i managed to do so with the help of google translator. I thought i should must share it on xda to English community for easy umderstading. Hit thanks if you get your phone back. And many thanks to veitnamis developer too....
1. Download the qualcom drivers and install it from given link.
https://app.box.com/s/5n42md550n4oxne04xttfz788cp0i4i3
Open device manager and ensure that you have correctly installed qualcom 9008 drivers. Remember the com port
2. Download and unzip this folder
https://app.box.com/s/zvvj2v87csuwmv93k7ztzevuiytyd0fi
You shall have a tool Boar Diag v3.99c folder and two folder named S and L.
3.IMPORTANT. You will have to choose folder S For F160K and S and for F160L and LV choose Folder L.
4. Now run the tool.
Check the 2 points on tool
1.Ap check
2.Emmc Test
In Ap chipset choose board
For F160s and F160k
D1L(MSM8960 SKDA)
FOR 160L
D1L(MSM8960 LV)
Select Com Port shown in device manager of your computer.
In TARGET DIR Choose the Folder of Named S or L according to your modal, As i told you earlier in step 3
Rest all should be unchecked
PRESS START
https://app.box.com/s/hr8y0cmzcond0jciemprl5jzr4rllggn
Now test will start and will take 10 seconds to complete
If this test run successfully AP and EMMC should show pass on tool window
5. In this step Now only uncheck
Emmc Test and then check the
Boot Image Restore and select ABOOT from drop down menu.
Only w points Checked.
Ap Check
Boot Img Restor
Rest all should be uncheck the same as in previous step.
PRESS START
https://app.box.com/s/w1r560py2bm2wwlbtch9bn7kh1bski2u
Now it will Test the AP CHECK and will write Boot image to your mobile.
It will take 10 to 15 seconds.
After successfully completion of this test you ll see download mode on your mobile. Or you may see an LG logo with a secure boot massege.
Important...
STEP 6 was not mentioned in orignal thread. I did this at my own and got my result.
6. If you dont see download mode or LG logo after completing step 5 even successfully completion shown ion tool, As in mine case on F160k. Then try step 5 with AP CHIPSET with D1L(MSM8960 RR&G)
rest same selection.
AND PRESS START.
I hope this will resolve your issue. As i did.
7. NOW ITS TIME TO FLASH LATEST KDZ FIRMWARE ACCORDING TO YOUR MoBILE Phone.
.
THATS ALL WHAT I HAVE FOR MY FRIENDS.
IF I HELPED YOU THEN PLZ PRAY FOR ME. THANKS ALOT

Thank you for providing the files! I have a bricked LG LTE2 F160K, which mode should I put the phone be?
My phone can still access download mode, and when I try to start up the tool, it just says "Failed during loading flash programmer"

bro if your download mode is working then you will have to flash kdz of your modal for f160k I think its 20k. you can find the latest kdz many sites. google it lg firmware you can find it on vietnam site lgviet.com

this programe is only for qhsusb_delod mode. no download no recovery state. if you have download mode then kdz is the way to unbrick

Help! "device was not found in dload trying flash programmer" i get this error

What kind of brick you have? Its qhsusb bulk mode. Then this guide will help you

what is "ion took"??
there are no "D1L(MSM8960 RR&G)" in the selection

muzammil457 said:
What kind of brick you have? Its qhsusb bulk mode. Then this guide will help you
Click to expand...
Click to collapse
test completed but my phone didn't enter to download mode
the driver name when i connect my LG is"QHSUSB_QLOAD"

why yu no reply??

Have you installed qualcm drivers first? If no then do it if yes then in board ap choose msm8960 it will work. But if doesnt then there is 1 more 8960 selection try that

Does this method works for a sony xperia ion which has the same problem????

ahamedlaheer said:
Does this method works for a sony xperia ion which has the same problem????
Click to expand...
Click to collapse
This programe is for qualcom devices. If your experia is qualcom based then it will work. But u need to find the files to flash doe your modalm I have loaded only f160 system files.

muzammil457 said:
Have you installed qualcm drivers first? If no then do it if yes then in board ap choose msm8960 it will work. But if doesnt then there is 1 more 8960 selection try that
Click to expand...
Click to collapse
yes i install it, i tried the other msm8960 but it doesn't work

Test point to force qhsusb-dload in LG F160s
mcycharles said:
Thank you for providing the files! I have a bricked LG LTE2 F160K, which mode should I put the phone be?
My phone can still access download mode, and when I try to start up the tool, it just says "Failed during loading flash programmer"
Click to expand...
Click to collapse
Dear all,
Can some one provide me the details of test points for LG F160s i want to force it, as m phone in dead alsmost,,,
i will b very thankful
Rizwan

Why u need to do that if u r not in hard brick state?

muzammil457 said:
I brick my lg f160k while flashing wrong kdz on it. It was in no download no recovery mode. Pc was showing qhsusb_dloade 9008. I searched alot over the internet to unbrick it but found nothing except a thread on veitnam site by a veitnamis developer. Thanks to him for this useful thread. With the help of this i unbrick my cell. It was very difficult to understand the thread while in Vietnam's language but i managed to do so with the help of google translator. I thought i should must share it on xda to English community for easy umderstading. Hit thanks if you get your phone back. And many thanks to veitnamis developer too....
1. Download the qualcom drivers and install it from given link.
https://app.box.com/s/5n42md550n4oxne04xttfz788cp0i4i3
Open device manager and ensure that you have correctly installed qualcom 9008 drivers. Remember the com port
2. Download and unzip this folder
https://app.box.com/s/zvvj2v87csuwmv93k7ztzevuiytyd0fi
You shall have a tool Boar Diag v3.99c folder and two folder named S and L.
3.IMPORTANT. You will have to choose folder S For F160K and S and for F160L and LV choose Folder L.
4. Now run the tool.
Check the 2 points on tool
1.Ap check
2.Emmc Test
In Ap chipset choose board
For F160s and F160k
D1L(MSM8960 SKDA)
FOR 160L
D1L(MSM8960 LV)
Select Com Port shown in device manager of your computer.
In TARGET DIR Choose the Folder of Named S or L according to your modal, As i told you earlier in step 3
Rest all should be unchecked
PRESS START
https://app.box.com/s/hr8y0cmzcond0jciemprl5jzr4rllggn
Now test will start and will take 10 seconds to complete
If this test run successfully AP and EMMC should show pass on tool window
5. In this step Now only uncheck
Emmc Test and then check the
Boot Image Restore and select ABOOT from drop down menu.
Only w points Checked.
Ap Check
Boot Img Restor
Rest all should be uncheck the same as in previous step.
PRESS START
https://app.box.com/s/w1r560py2bm2wwlbtch9bn7kh1bski2u
Now it will Test the AP CHECK and will write Boot image to your mobile.
It will take 10 to 15 seconds.
After successfully completion of this test you ll see download mode on your mobile. Or you may see an LG logo with a secure boot massege.
Important...
STEP 6 was not mentioned in orignal thread. I did this at my own and got my result.
6. If you dont see download mode or LG logo after completing step 5 even successfully completion shown ion tool, As in mine case on F160k. Then try step 5 with AP CHIPSET with D1L(MSM8960 RR&G)
rest same selection.
AND PRESS START.
I hope this will resolve your issue. As i did.
7. NOW ITS TIME TO FLASH LATEST KDZ FIRMWARE ACCORDING TO YOUR MoBILE Phone.
. THATS ALL WHAT I HAVE FOR MY FRIENDS.
I have F160L.i tried same as u mention,All proceger complete but no download mode no fastboot mode no LG logo.What to do now?still on qualcomm 9008
Click to expand...
Click to collapse

Hello all
If after restore aboot phone not power on
Need restore all this file: about, Backupgpt, boot, dbi, laf, Primarygpt, recovery, rpm, tz, sdl1, sdl2, sdl3 (one by one, not MIX!!!) and after restore last sdl3 power turn on!

muzammil457 said:
I brick my lg f160k while flashing wrong kdz on it. It was in no download no recovery mode. Pc was showing qhsusb_dloade 9008. I searched alot over the internet to unbrick it but found nothing except a thread on veitnam site by a veitnamis developer. Thanks to him for this useful thread. With the help of this i unbrick my cell. It was very difficult to understand the thread while in Vietnam's language but i managed to do so with the help of google translator. I thought i should must share it on xda to English community for easy umderstading. Hit thanks if you get your phone back. And many thanks to veitnamis developer too....
1. Download the qualcom drivers and install it from given link.
https://app.box.com/s/5n42md550n4oxne04xttfz788cp0i4i3
Open device manager and ensure that you have correctly installed qualcom 9008 drivers. Remember the com port
2. Download and unzip this folder
https://app.box.com/s/zvvj2v87csuwmv93k7ztzevuiytyd0fi
You shall have a tool Boar Diag v3.99c folder and two folder named S and L.
3.IMPORTANT. You will have to choose folder S For F160K and S and for F160L and LV choose Folder L.
4. Now run the tool.
Check the 2 points on tool
1.Ap check
2.Emmc Test
In Ap chipset choose board
For F160s and F160k
D1L(MSM8960 SKDA)
FOR 160L
D1L(MSM8960 LV)
Select Com Port shown in device manager of your computer.
In TARGET DIR Choose the Folder of Named S or L according to your modal, As i told you earlier in step 3
Rest all should be unchecked
PRESS START
https://app.box.com/s/hr8y0cmzcond0jciemprl5jzr4rllggn
Now test will start and will take 10 seconds to complete
If this test run successfully AP and EMMC should show pass on tool window
5. In this step Now only uncheck
Emmc Test and then check the
Boot Image Restore and select ABOOT from drop down menu.
Only w points Checked.
Ap Check
Boot Img Restor
Rest all should be uncheck the same as in previous step.
PRESS START
https://app.box.com/s/w1r560py2bm2wwlbtch9bn7kh1bski2u
Now it will Test the AP CHECK and will write Boot image to your mobile.
It will take 10 to 15 seconds.
After successfully completion of this test you ll see download mode on your mobile. Or you may see an LG logo with a secure boot massege.
Important...
STEP 6 was not mentioned in orignal thread. I did this at my own and got my result.
6. If you dont see download mode or LG logo after completing step 5 even successfully completion shown ion tool, As in mine case on F160k. Then try step 5 with AP CHIPSET with D1L(MSM8960 RR&G)
rest same selection.
AND PRESS START.
I hope this will resolve your issue. As i did.
7. NOW ITS TIME TO FLASH LATEST KDZ FIRMWARE ACCORDING TO YOUR MoBILE Phone.
.
THATS ALL WHAT I HAVE FOR MY FRIENDS.
IF I HELPED YOU THEN PLZ PRAY FOR ME. THANKS ALOT
Click to expand...
Click to collapse
any other link for qualcomm drivers?

Link is fine. U can download it from google.

Need some Help
My phone goes to Service Mode but not in Download mode.
Should i try this method?
And how i can find out my phone is S OR K OR L originally hardware based
Waiting for your answer .
My phone is dead since 1 month

[GUIDE] How to return to Stock/Flash Images with QFIL

Here is a step by step guide on how to flash the stock rom with QFIL and by extension any image.
Download and install the Qualcomm drivers from here
Download either of the firmware from here
Download the support files (Firehose/rawprogram0.xml/patch0.xml) here
Extract the firmware and support files to the same folder so you can easily access them like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8909.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram0.xml and then the patch0.xml when prompted.
Plug in your tablet
Run the following adb command "adb reboot edl" (Now the screen should be blank but the led light should be red)
If the text at the top of the QFIL application says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you didn't install the drivers properly.
Click the Download Button to begin flashing your device
So the above explains how to flash everything if you want to flash individual partitions you can edit your rawprogram0.xml to only include the ones you want. (patch0.xml stays the same) I have linked below 2 examples, one of them flashes just a boot.img and one that just flashes the recovery.img. But you aren't limited to those.
Recovery
Boot

Mine just in case

Awesome, thanks for this post! it will really help us in upcoming projects!

Managed to revive my phone using the B12 files but it crashes after completing system.img, I think the problem is userdata.img, my phone boots but I lost the imei and I don't know how to get it back, I'm still trying.

ZTE 971 not recognized by either QPST or QFIL
Thanks for all the detailed instructions. But my ZTE 971 is not visible to either qpst or qfil eventhough the phone shows in windows 8.1. In the Developer Options menu, I noticed Select USB Configuration, RNDIS (USB ethernet) option cannot be enabled. I wonder if this has anything to do with it. OEM unlocking, USB debbugging are already selected. Any suggestions, please? Thanks.
ps. I live in Turkey. I got this phone last year from AT&T and have unlocked the sim.

My PC is not detecting my ZTE MAVEN 3
I have installed all drives but still facing the issue. I am using it on Windows 10.

I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.

Mega says that link for the driver is invalid, but the driver is included in your QPST download anyway.

000Nick said:
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Click to expand...
Click to collapse
solucionaste hermano
Mod edit:
you solved brother
Click to expand...
Click to collapse

it says qhsusb_bulk when I connect the the software is not working in the mobile and it is stuck at bootloader screen but I used the press both buttons to go to edl mode method and it said in the device manager a device connected with name : qhsusb_bulk
help pls

Hello All.
I am not able to get the following files
rawprogram.xml and patch.xml for LG G8x​Please help me to get this files ASAP as i have hard bricked the mobile, all partitions deleted

[GUIDE][QFIL] FLASHING QFIL IMAGES [YU Yureka Black]

Procedure For Flashing/recovering your Garlic using QFIL/QPST Tool
REQUIREMENTS :
-A working PC.
-Qualcomm Drivers.
-QFIL Tools (I'd prefer and recommend ver2.0.05 as it is much more efficient than the newer ones) *Required .Net Framework 4.5 or higher
-ADB Drivers (just in case if your phone ain't bricked and you don't know how to boot into edl mode)
-N/M Full Firmware files (No the N-Firmware or M-firmware files provided by me).
-Back up your internal storage as this would wipe the internal (I prefer it this way)
-If you are using the QFIL 2.0.05, then you should install the tool.
-Extract the Firmware file and copy it to <directory where you installed qfil>/Qualcomm/bin/ this is to avoid sahara failed error.
-In simple words, keep the extracted firmware files inside the QFIL's folder.
-Connect your phone to PC and type in adb reboot edl in adb terminal to boot into EDL mode, or reboot edl in terminal emulator.
-If you have installed all drivers properly, your phone should be listed under Ports in Device Manager as Qualcomm Diganostic Device xx9008 (note this number, this is important) if your are getting 900E or 9003 (in case of bricked phone) you need to make it boot into 9008 mode using Deep Flash Cable (Guides to this will be provided soon, or you could just refer Google).
PROCEDURE :
-Open QFIL Tool.
-Once the phone is connected in EDL mode, it will show up under the ports (automatically selected, still if for any reason, open up and select port)
-Select Flat Build.
-Select the Programmer Path. It will open up the file browse window, go to the location where you have extracted the firmware and select Programmer_emmec_firehorse file.
-Select Patch File and select raw_unspare.xml file.
Now select Patch.xml.
-Click Download Button and flashing process will begin. Wait till it finishes and hold down your power button to boot your phone.
DOWNLOADS :
- Stock N Qfil
- Stock M Qfil
CREDITS : Athul

pritish1998 said:
- Stock N Qfil
- Stock M Qfil
CREDITS : Athul
Click to expand...
Click to collapse
Can you reupload Stock N Qfil?

Rose in YU YUREK∆ BL∆CK - TINNO p7201 | OFFICIAL
Tap here to view all notes in this chat.
t.me
user74354 said:
Can you reupload Stock N Qfil?
Click to expand...
Click to collapse

IMEI REPAIR REDMI 6 LOCKED BOOTLOADER

Soo I recently Had a problem explained here
Help I formated the flash by mistake using SpFlash tool and now my bootloader is locked and I have no imei
Hello I formated the flash of my redmi 6 using sp flash tool and now my bootloader is locked sadly when I tried to unlock it my sim is not working due to no imei soo does anyone know how to fix this issue. Soo does anyone have a way to repair the...
forum.xda-developers.com
And I found a fix
Requirements--
1) Mtk-SU Easy https://github.com/JunioJsv/mtk-easy-su
2) This Version of MIUI
Redmi 6 https://bigota.d.miui.com/V11.0.2.0...XM_20200102.0000.00_9.0_global_5bc2bc0cf8.tgz
Redmi 6A
https://bigota.d.miui.com/V11.0.2.0.PCGMIXM/cereus_global_images_V11.0.2.0.PCGMIXM_20200102.0000.00_9.0_global_5bc2bc0cf8.tgz
3) A backup of your NVDATA or any IMEI changing app I don't really know the rules here about such apps soo do a little bit of googling (NOTEONT CHANGE IMEI ONLY PUT THE ORIGINAL IMEI OF YOU DEVICE)
4)SP-Flash Tool
ONE THING IF YOU HAVE UNLOCKED BL JUST GO AHEAD AND GET MAJISK AND USE IMEI RECOVERY APPS WITH ROOT
Let's Begin(UNLOCKED BOOTLOADER PEOPLE JUST USE FASTBOOT AND ON PC OPEN flashall.bat which is inside the folder once extracted then continue from step 2)
1) Flash the above version MIUI using SPFLASH TOOL
2) Setup the phone with NO INTERNET after setup connect to internet
3) Download and install the mtksu easy app latest version also install majisk manager 8.07
4)Open the mtksueasy app and click on the hash button to get root
5) After that go ahead and install either root explorer or IMEI changing app
6)
For people having NVDATA backup (if from twrp extract using https://play.google.com/store/apps/details?id=ma.mk.twrpbackupextractor)
After that install Root Explorer and give it root preveleges. Then open /vendor/nvdata/
There copy all stuff inside and keep inside a folder as safety then go ahead and delete it all from /vendor/nvdata (mount it as r/w) next go ahead and paste all stuff from your NVDATA BACKUP INTO THE FOLDER. Then reboot.
For people who are using IMEI CHANGER APP just go ahead and type your original imei (Get it from the box)
7) Your done actually u can now unlock bootloader.

No need for any engineering roms or what not

I tried to use SP flash tool and it failed because of missing authentication file.

VolksPC said:
I tried to use SP flash tool and it failed because of missing authentication file.
Click to expand...
Click to collapse
use mtk bypass tool by mct team (free tool) google and download and open then click bypass then connect to pc then press volume up+power (make sure phone is powered off) it will bypass the auth and then you can use sp flash
make sure to download latest version of tool becuz old version required an extra step of installing drivers

Thanks for the information, I will try again.

Question Redmi Note 10 5G can't install fastboot with miflash

Hey all.
I tried getting the Fastboot rom onto my phone but nothing works. I keep getting errors like **FAILED (Error reading sparse file)**
At this point I don't know what to do, I might go to Xiaomi to show them it and possibly get them to do something about it.
EDIT!!!:
I fixed it, changed folder name to x and worked. Thanks to NOSS8 for trying to help

ThePhoneUser0 said:
Hey all.
I tried getting the Fastboot rom onto my phone but nothing works. I keep getting errors like **FAILED (Error reading sparse file)**
At this point I don't know what to do, I might go to Xiaomi to show them it and possibly get them to do something about it.
Click to expand...
Click to collapse
Check here that everything is correct or use the bat file included in the Fastboot rom.
A few tips: use a USB2 port, another version of Miflash, the path C:\miflash
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com

NOSS8 said:
Check here that everything is correct or use the bat file included in the Fastboot rom.
A few tips: use a USB2 port, another version of Miflash, the path C:\miflash
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Tried all that, nothing worked.

ThePhoneUser0 said:
Tried all that, nothing worked.
Click to expand...
Click to collapse
Post the Miflash log (Miflash/log folder).

Sure.

Post the largest log in size.

Here.

For some reason it didn't post.
I'll just put it on mediafire.
MediaFire
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

NOSS8 said:
Post the largest log in size.
Click to expand...
Click to collapse

Try an older version of Miflash.

NOSS8 said:
Try an older version of Miflash.
Click to expand...
Click to collapse
I tried that yesterday, it was the version 2021 08 13

Often fails with Media Tek devices try with
https://xiaomitools.com/sp-flash-tool-en/ or
https://www.technobuzz.net/unlock-bootloader/
EDit:
And I've never seen this:
info1:$fastboot -s (serial number) getvar product
https://www.dmrepairtech.com/2021/12/mtk-client-tool-v52-unlocktool.html

NOSS8 said:
Often fails with Media Tek devices try with
https://xiaomitools.com/sp-flash-tool-en/ or
https://www.technobuzz.net/unlock-bootloader/
EDit:
And I've never seen this:
info1:$fastboot -s (serial number) getvar product
Click to expand...
Click to collapse
Interesting, i'll try tomorrow around 16:00 UTC

NOSS8 said:
Often fails with Media Tek devices try with
https://xiaomitools.com/sp-flash-tool-en/ or
https://www.technobuzz.net/unlock-bootloader/
EDit:
And I've never seen this:
info1:$fastboot -s (serial number) getvar product
https://www.dmrepairtech.com/2021/12/mtk-client-tool-v52-unlocktool.html
Click to expand...
Click to collapse
I unlocked the bootloader again (with mtkclient) but don't know how to use sp flash tool as of course I never used it and its my first time flashing a MediaTek device

ThePhoneUser0 said:
I unlocked the bootloader again (with mtkclient) but don't know how to use sp flash tool as of course I never used it and its my first time flashing a MediaTek device
Click to expand...
Click to collapse
I can't tell you more, never had Media Tek devices.
How to use SP Flash Tool
Step 1: To get started, download SP flash tool compressed file (Smart Phone Flash Tool) and extract it on your computer.
Step 2: Next, download stock ROM firmware file of your Android device and extract it to a folder on your computer. You will find the Android scatter file after extracting.
Step 3: Now switch off your Android smartphone or tablet and remove the battery from the device (if it is removable).
Power Off Android Device
Step 4: Next, go to the extracted folder in Step 1 and click “Flash_tool.exe” to launch SP flash tool.
Launch SP Flash Tool
Step 5: Now in the SP Flash tool window, click on “Download” tab.
Download Tab SP Flash Tool
Step 6: Next, in the download tab click on “scatter-loading” button.
Scatter Loading SP Flash Tool
Step 7: Now click on “Open Scatter File” and choose the scatter file from Step 2.
Choose Scatter File SP Flash Tool
Step 8: Next, click on the “Download” button to launch the firmware flashing process.
Download Button SP Flash Tool
Step 9: Now connect your Android device to the computer using the original USB data cable while pressing Volume up or Volume down button.
Step 10: The firmware flashing process will start immediately, and it will take a minute or two to get completed. Once the flashing process is finished, you will see the “Download OK” green ring in Smart Phone Flash Tool.
Download Ok SP Flash Tool
Step 11: Now close the SP Flash tool Window and unplug your Android smartphone or tablet from the computer.

This tool also
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/

NOSS8 said:
I can't tell you more, never had Media Tek devices.
How to use SP Flash Tool
Step 1: To get started, download SP flash tool compressed file (Smart Phone Flash Tool) and extract it on your computer.
Step 2: Next, download stock ROM firmware file of your Android device and extract it to a folder on your computer. You will find the Android scatter file after extracting.
Step 3: Now switch off your Android smartphone or tablet and remove the battery from the device (if it is removable).
Power Off Android Device
Step 4: Next, go to the extracted folder in Step 1 and click “Flash_tool.exe” to launch SP flash tool.
Launch SP Flash Tool
Step 5: Now in the SP Flash tool window, click on “Download” tab.
Download Tab SP Flash Tool
Step 6: Next, in the download tab click on “scatter-loading” button.
Scatter Loading SP Flash Tool
Step 7: Now click on “Open Scatter File” and choose the scatter file from Step 2.
Choose Scatter File SP Flash Tool
Step 8: Next, click on the “Download” button to launch the firmware flashing process.
Download Button SP Flash Tool
Step 9: Now connect your Android device to the computer using the original USB data cable while pressing Volume up or Volume down button.
Step 10: The firmware flashing process will start immediately, and it will take a minute or two to get completed. Once the flashing process is finished, you will see the “Download OK” green ring in Smart Phone Flash Tool.
Download Ok SP Flash Tool
Step 11: Now close the SP Flash tool Window and unplug your Android smartphone or tablet from the computer.
Click to expand...
Click to collapse
Keeps saying I need the auth file.