Related
**UPDATE RESOLVED**
For anyone who searches and has same problems.
I needed an sdcard to get the files onto the phone.
To recap - it was stuck in boot, TWRP would load and stated no OS installed.
1. In rooting guide as per Here download file linked in the guide and unzip.
2. From folder 3 of that zip file there is a folder called data containing stock.img - place this onto sdcard.
3. Then go to this thread and download the files as hosted on mega.nz - over 2 gig.
4. Extract that zip to the sd card so that on the card is a folder called 'dload'
5. To confirm, the dload folder should have update.app and 2 folders called dt and hw
6. Put sdcard into phone.
7 .Boot into TWRP
8. Goto install, select storage, select your sdcard then select stock.img, agree to install, ignore message about no os.
9.Once that has installed my phone just restarted, EMUI came up, read the dload folder automatically and ran.
Then once phone started it found a newer update and installed that.
Phone is now working, unrooted and bootloader is locked again.
All this was found on the XDA site, just across various posts.
Thanks again to all.
********ORIGINAL BELOW********
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
fabgav said:
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
Click to expand...
Click to collapse
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update
here's a list of update files: https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124
and here you can find the oeminfo files, there's a google drive link under oemfiles, at least for the vns-l21, 22 and 31: https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
mjz2cool said:
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update[/url]
Click to expand...
Click to collapse
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
first of all, no, p9 is a different phone, but you posted on the p9 lite forum. i'd suggest posting this question on the p9 forum.
i don't know exactly how it works for the p9, but it shouldn't be much different.
for the rom zip: inside that zip there's an update.app file, that file should indeed be put in a new folder called dload, but it won't be installed through twrp.
on the p9 lite it works like this: you flash the oemfile through twrp, and after that push and hold both volume buttons and the powerbutton till the phone reboots and shows an update progress screen, then you can release the buttons. now the update file will be installed. but then again, i don't know the procedure for the p9 so be sure to post your question on the correct forum.
edit: i've taken a look on that link to the stock rom you tried installing, it's a zip file that contains the dload folder, just put that folder on the root of your sdcard. do make sure it's the correct version.
you will have to flash the stock recovery for your phone however, and if the p9 works the same way as the p9 lite you should find an oeminfo file and flash that with twrp.
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
fabgav said:
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
Click to expand...
Click to collapse
here's a link to the oeminfo for eva -l9: https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903 i think that one should be flashed in twrp, and after that you can use the 3 button combo
no problem at all
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
Hello
Here it is p9 lite.
Section p9 is here. https://forum.xda-developers.com/p9
I think you are looking for this.
https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
Yes the steps are.
Bootloader
Twrp
Flash Cxxxoeminfo
DLOAD Bxxx
SOLVED
First post updated with fix.
Thanks for all the help here on XDA
deleted by user
Any other place i can download the "dload" file beisides mega...please any help...
Yureka 2 :NO OS installed .Do you want to reboot ? Clicked reboot.Mobile hangs
Hi,
I tried to install Lineage OS 15.1 custom ROM using TWRP recovery in my Yureka 2 YU5551. I wiped out the data before flashing. During flashing I faced Error 7 and unable to install custom ROM.Twrp asked this- NO OS installed. Do you want to reboot? I Clicked reboot and my mobile not even booted properly. Still hangs. I tried to open recovery mode using the power button and volume up and volume down button. I am unable to go to recovery mode. When I connect my mobile to my laptop its not recognizing as the phone is not restarting.
Can someone plz help me how to install an OS and start my phone. Thanks in advance.
Thanks
Thinagharraj
Hello sir, please notice me. Can I possibly get another link to get the stock.img because the link that you gave was already not available. Hoping for your response. Thanks
I have sticker in recovery no OS installed + no backup + locked bootloader
What can I do
----------------------/----------------------
Any one please help me
Hi, i have a big problem: my phone isn't starting up anymore. Yesterday i upgraded to Nougat, and all was fine. Then i decided to install Revolution ROM, so i flashed twrp for 7.0 and then flashed the ROM. Phone started up correctly but then i decided to wipe data so i can have a "clean" installation. So i rebooted into twrp and formatted data. After this, phone get into bootloop. Just after that, i couldn't boot into twrp, and when i tried to boot in, it stuck in the yellow text "Your phone is booting up...". Then i downloaded b160, extracted it with Huawei Update Extractor and flashed all(system, boot, cust and recovery). This didn't work, i was stuck in the 3 choices menu with text "Your phone is booting up...", can't even see Huawei's logo. 1 hour ago i installed from sd (3 buttons way) b160, installation successful and now i can see Huawei's logo, but after that black screen . I tried to reboot into bootloader but i don't see anymore yellow "unlocked phone" text. I can just boot into eRecovery. Right now i'm trying to download b100 and trying to see if i can fix it by myself :fingers-crossed:. If u can, please help me, i really need help to get this phone working again.
(Sorry for my bad english )
Edit: i posted in wrong section, sorry xD
Edit 2: i finally boot into bootloader, but "PHONE Locked" . How can i unlock bootloader again? I don't have that code anymore and i can't boot into system..
xDavi01 said:
Hi, i have a big problem: my phone isn't starting up anymore. Yesterday i upgraded to Nougat, and all was fine. Then i decided to install Revolution ROM, so i flashed twrp for 7.0 and then flashed the ROM. Phone started up correctly but then i decided to wipe data so i can have a "clean" installation. So i rebooted into twrp and formatted data. After this, phone get into bootloop. Just after that, i couldn't boot into twrp, and when i tried to boot in, it stuck in the yellow text "Your phone is booting up...". Then i downloaded b160, extracted it with Huawei Update Extractor and flashed all(system, boot, cust and recovery). This didn't work, i was stuck in the 3 choices menu with text "Your phone is booting up...", can't even see Huawei's logo. 1 hour ago i installed from sd (3 buttons way) b160, installation successful and now i can see Huawei's logo, but after that black screen . I tried to reboot into bootloader but i don't see anymore yellow "unlocked phone" text. I can just boot into eRecovery. Right now i'm trying to download b100 and trying to see if i can fix it by myself :fingers-crossed:. If u can, please help me, i really need help to get this phone working again.
(Sorry for my bad english )
Edit: i posted in wrong section, sorry xD
Edit 2: i finally boot into bootloader, but "PHONE Locked" . How can i unlock bootloader again? I don't have that code anymore and i can't boot into system..
Click to expand...
Click to collapse
Try dload method
Ww222 said:
Try dload method
Click to expand...
Click to collapse
I've alredy tried with 2 different firmwares: b130 and b120 but both say that they're incompatible.. Right now i'm downloading b100
(btw, my phone model is L-21 dual-sim)
Edit: I've tried to install b100 without any success. Everytime i try to install a firmware it says "Software installation failed! Incompatibility with current version. Please download the correct update package"
I heard about "oeminfo.img", because before having theese problems i was in 7.0 and to rollback you need to flash this oeminfo.img, but i can't flash anything .
Please help me, i'm alredy losing hope to repair my device... What should i do?
xDavi01 said:
I've alredy tried with 2 different firmwares: b130 and b120 but both say that they're incompatible.. Right now i'm downloading b100
(btw, my phone model is L-21 dual-sim)
Edit: I've tried to install b100 without any success. Everytime i try to install a firmware it says "Software installation failed! Incompatibility with current version. Please download the correct update package"
I heard about "oeminfo.img", because before having theese problems i was in 7.0 and to rollback you need to flash this oeminfo.img, but i can't flash anything .
Please help me, i'm alredy losing hope to repair my device... What should i do?
Click to expand...
Click to collapse
What is your region and model?
Ww222 said:
What is your region and model?
Click to expand...
Click to collapse
Europe, VNS-L21 and C432 if i remember correctly
xDavi01 said:
Europe, VNS-L21 and C432 if i remember correctly
Click to expand...
Click to collapse
Download this:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66051/f1/full/update.zip
Ww222 said:
Download this:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66051/f1/full/update.zip
Click to expand...
Click to collapse
Thank you for helping me, i really apprecciate it . Later i'll download it and install and i'll let you know if this works
same here. I'm downloading the update.
---------- Post added at 10:17 PM ---------- Previous post was at 09:41 PM ----------
Ok so I've installed an update but I got a black screen. All I had to do is to clear cache and wipe data etc (in recovery option), then reboot to "dload mode" and... well, it works !
Folks,
I recently purchased a preowned HTC One M9 in good shape. The phone does not appear to have been rooted, s-offed or any such thing. It looks bone stock. It currently has Android 6.0 on it. and software number 3.39.531.41
It has been over a month since t-mobile has rolled out the nougat update for the HTC One-M9 and I have not received any update on the phone. I constantly keep checking if the phone has an update available but the phone always says no update available. I gave up on the OTA being rolled out for the phone so I downloaded the Nougat RUU which is 4.27.531.6 .
When I follow the procedure for installing the update I got a signature error 132 . Now I know that error shows up when the phone is rooted or is s-off or any such thing but my phone seems to be completely stock. Does anyone know why I cant install the RUU or receive OTA updates to Nougat for my phone?
I think I figured it out. I contacted T-Mobile support who told me to contact HTC since the HTC servers are responsible for pushing out updates. So I contacted HTC customer support and shared my IMEI with the representative. She looked up some information on the HTC database using the IMEI number and told me that my phone was a store demo phone and that demo phones are blocked from receiving updates from the HTC servers. Oh well.
Hello,
Just got the same phone with same error. If someone provides me with 0PJAIMG.ZIP, I can test and see how it goes. So far update from phone >> didn't work; RUU update >> didn't work. same error
Thanks
I had the same problem some time a go what you have to do is to check if its relock and has stock recovery. If yes first flash 3.39.531.41 RUU before you can flash the 4.27.531.6 or the OTA. But my receives the OTA alright but could neither install that or RUU
amptronic said:
I had the same problem some time a go what you have do is to check if its relock and has stock recovery. If yes first flash 3.39.531.41 RUU before you can flash the 4.27.531.6 or the OTA.
Click to expand...
Click to collapse
So it has to be locked with stock recovery? Then flash ruu 3.49 ad then the newest version?
Thanks
dohcvtec said:
So it has to be locked with stock recovery? Then flash ruu 3.49 ad then the newest version?
Thanks
Click to expand...
Click to collapse
did it work?? I'm having same problem..
smilesintears77 said:
did it work?? I'm having same problem..
Click to expand...
Click to collapse
Did anyone get any solution for this error? I am having the same issue
Thanks
vbcomer said:
Did anyone get any solution for this error? I am having the same issue
Thanks
Click to expand...
Click to collapse
i think first decrypt RUU then manually flash whole Nougat ROM.
vbcomer said:
Did anyone get any solution for this error? I am having the same issue
Thanks
Click to expand...
Click to collapse
i found a way i have demo set when i use 4.27.531.6 RUU its saying signature error so this is what i did
i download OTA from link here http://fotadl-az.htc.com/secure/OTA_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6-3.39.531.41_release_497409trrpztkwvabkx6lv.zip
after that i just boot into recovery mode and then select an opton Updae via ADB
rename file to OTA.zip then open command prompt located to where file is and then run below command
adb sideload ota.zip
let the process finish it will take a while. especially when HTC logo appears it took 5 min but i finally have nougat
for detail how to apply OTA here is link http://www.theandroidsoul.com/how-to-install-ota-updates-manually-using-recovery-and-adb-sideload/
m_abbas25 said:
i found a way i have demo set when i use 4.27.531.6 RUU its saying signature error so this is what i did
i download OTA from link here http://fotadl-az.htc.com/secure/OTA_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6-3.39.531.41_release_497409trrpztkwvabkx6lv.zip
after that i just boot into recovery mode and then select an opton Updae via ADB
rename file to OTA.zip then open command prompt located to where file is and then run below command
adb sideload ota.zip
let the process finish it will take a while. especially when HTC logo appears it took 5 min but i finally have nougat
for detail how to apply OTA here is link http://www.theandroidsoul.com/how-to-install-ota-updates-manually-using-recovery-and-adb-sideload/
Click to expand...
Click to collapse
Hi,
Thanks for the info. However, I couldn't get into the recovery mode. Either from bootloader -> "Boot to recovery mode" or via command "adb reboot recovery", after the phone reboots, the screen will show a phone icon with triangle. Then after awhile the phone will restart normally. I can't get to step to do sideload the zip file.
I also put the above ota.zip on a micro SD card and load the card in the phone, then boot to download mode. In that mode, it shows the following 2 lines:
FILE /mnt/media_rw/ext_sd/0PJAIMG.zip
File NOT FOUND
Where do I find that missing file?
Thanks
vbcomer said:
Hi,
Thanks for the info. However, I couldn't get into the recovery mode. Either from bootloader -> "Boot to recovery mode" or via command "adb reboot recovery", after the phone reboots, the screen will show a phone icon with triangle. Then after awhile the phone will restart normally. I can't get to step to do sideload the zip file.
I also put the above ota.zip on a micro SD card and load the card in the phone, then boot to download mode. In that mode, it shows the following 2 lines:
FILE /mnt/media_rw/ext_sd/0PJAIMG.zip
File NOT FOUND
Where do I find that missing file?
Thanks
Click to expand...
Click to collapse
I think your recovery file is damaged. Thou i am novice in this but i think you should run RUU of existing rom it may repair your recovery then try this method.
OK,
I found the 0PJAIMG.zip for version 3.39.531.7 in this forum "https://forum.xda-developers.com/tmobile-one-m9/general/please-read-rooting-using-twrp-t3069022"
I put that on my SD card and was able to update the phone from Lollipop to Marshmallow.
However, after that update, the phone still won't update from Marshmallow to Nougat using the file RUU_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6 downloaded from htc website nor the OTA.zip downloaded from this thread. The phone keeps having the same Error [132] Signature Error. Or it won't go into the Recovery mode to do sideload of the OTA.zip. If the original Recovery file (from Lollipop) was bad/corrupt, wouldn't the Marshmallow update correct/fix that file?
So, do we have any other idea to upgrade the phone from Android 6.0 to 7.0? Does anyone have a 0PJAIMG.zip for 7.0?
Thanks
vbcomer said:
OK,
I found the 0PJAIMG.zip for version 3.39.531.7 in this forum "https://forum.xda-developers.com/tmobile-one-m9/general/please-read-rooting-using-twrp-t3069022"
I put that on my SD card and was able to update the phone from Lollipop to Marshmallow.
However, after that update, the phone still won't update from Marshmallow to Nougat using the file RUU_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6 downloaded from htc website nor the OTA.zip downloaded from this thread. The phone keeps having the same Error [132] Signature Error. Or it won't go into the Recovery mode to do sideload of the OTA.zip. If the original Recovery file (from Lollipop) was bad/corrupt, wouldn't the Marshmallow update correct/fix that file?
So, do we have any other idea to upgrade the phone from Android 6.0 to 7.0? Does anyone have a 0PJAIMG.zip for 7.0?
Thanks
Click to expand...
Click to collapse
In order to OTA to work which is in this forum you have to be in 3.39.531.41 first find RUU of this version run it then go for OTA.
Noted that you wont be able to update from marshmallow to nougat using RUU you have to use OTA but for that you must be in version 3.39.531.41 .
Ok. I was able to install 3.39.531.41. I will try the OTA now
m_abbas25 said:
In order to OTA to work which is in this forum you have to be in 3.39.531.41 first find RUU of this version run it then go for OTA.
Noted that you wont be able to update from marshmallow to nougat using RUU you have to use OTA but for that you must be in version 3.39.531.41 .
Click to expand...
Click to collapse
I updated to version 3.39.531.41 but I am still unable to get to Recovery mode on my phone. It keeps showing the red triangle with exclamation mark.
So, is that correct that I am now having two choices (besides obviously stay with Marshmallow)
1. Need to somehow fix the recovery mode on the phone? It is a demo unit so I don't know if that has anything with the recovery not working
2. Try to download the 0PJAIMG for 4.27 (Nougat) and install from sd card. I did find the file from AndroidFileHost website, but the phone gave error when it tried to load the zip file from download mode:
12 RU_ZIP_ERROR
FAIL 12 RU_ZIP_ERROR
Do you have a reliable source for the OPJAIMG file for Nougat?
I did a research on the 12 RU_ZIP_ERROR and found an instruction for AT&T from developer Blueberry who suggested "If you're on Marshmallow base, first of all you need to upgrade your firmware and then flash this 0PJAIMG zip file via download mode in otherwise you'll be getting "12 RU_ZIP ERROR" during the flash process. No Wipe Firmware Link: https://www.androidfilehost.com/?fid=745425885120692233"
The above was for AT&T but I found the no_wipe zip for TMobile, however, I don't know how to upgrade the firmware on my phone using one of these files
the firmware no_wipe files are here:
https://www.androidfilehost.com/?w=files&flid=134381
The file I downloaded is "firmware_tmous_4.27.531.6_NoWipe.zip", but like I said above, I don't know how to update the firmware.... Can someone give me some directions?
Update: I renamed the file "firmware_tmous_4.27.531.6_NoWipe.zip" to "0PJAIMG.zip" and tried to update from download mode, but the phone gave error: 8 RU_SIGNATURE_FAIL.
Another research indicated that since the phone is S-ON and Locked, these firmware wouldn't install because they were not signed. Where can I find signed firmware for this phone?
Thanks
vbcomer said:
I updated to version 3.39.531.41 but I am still unable to get to Recovery mode on my phone. It keeps showing the red triangle with exclamation mark.
So, is that correct that I am now having two choices (besides obviously stay with Marshmallow)
1. Need to somehow fix the recovery mode on the phone? It is a demo unit so I don't know if that has anything with the recovery not working
2. Try to download the 0PJAIMG for 4.27 (Nougat) and install from sd card. I did find the file from AndroidFileHost website, but the phone gave error when it tried to load the zip file from download mode:
12 RU_ZIP_ERROR
FAIL 12 RU_ZIP_ERROR
Do you have a reliable source for the OPJAIMG file for Nougat?
I did a research on the 12 RU_ZIP_ERROR and found an instruction for AT&T from developer Blueberry who suggested "If you're on Marshmallow base, first of all you need to upgrade your firmware and then flash this 0PJAIMG zip file via download mode in otherwise you'll be getting "12 RU_ZIP ERROR" during the flash process. No Wipe Firmware Link: https://www.androidfilehost.com/?fid=745425885120692233"
The above was for AT&T but I found the no_wipe zip for TMobile, however, I don't know how to upgrade the firmware on my phone using one of these files
the firmware no_wipe files are here:
https://www.androidfilehost.com/?w=files&flid=134381
The file I downloaded is "firmware_tmous_4.27.531.6_NoWipe.zip", but like I said above, I don't know how to update the firmware.... Can someone give me some directions?
Update: I renamed the file "firmware_tmous_4.27.531.6_NoWipe.zip" to "0PJAIMG.zip" and tried to update from download mode, but the phone gave error: 8 RU_SIGNATURE_FAIL.
Another research indicated that since the phone is S-ON and Locked, these firmware wouldn't install because they were not signed. Where can I find signed firmware for this phone?
Thanks
Click to expand...
Click to collapse
I don't know much now but we can try RUU of 3.39.531.41. It should solve your recovery. But the question is where you can download that?? Try finding a link mean while i am uploading it to my google drive then i will share link. Since i am in third world country it will take time. I will update you as soon as it is uploaded
vbcomer said:
I updated to version 3.39.531.41 but I am still unable to get to Recovery mode on my phone. It keeps showing the red triangle with exclamation mark.
So, is that correct that I am now having two choices (besides obviously stay with Marshmallow)
1. Need to somehow fix the recovery mode on the phone? It is a demo unit so I don't know if that has anything with the recovery not working
Thanks
Click to expand...
Click to collapse
To continue on to recovery mode, try this:
" If a device with a red triangle and exclamation point appears, Hold Power while pressing and releasing Volume Up to continue."
As for the 3.39.531.41 RUU, put the zip from this link into your external SD then boot into fastboot/download mode. From that point on the phone should automatically recognize the .zip and install from there.
https://www.androidfilehost.com/?fid=24438995911969398,
Thank you much! I will try everything you suggested now. I really appreciate your help!
dbs25 said:
To continue on to recovery mode, try this:
" If a device with a red triangle and exclamation point appears, Hold Power while pressing and releasing Volume Up to continue."
As for the 3.39.531.41 RUU, put the zip from this link into your external SD then boot into fastboot/download mode. From that point on the phone should automatically recognize the .zip and install from there.
https://www.androidfilehost.com/?fid=24438995911969398,
Click to expand...
Click to collapse
I downloaded the RUU from above link [https://www.androidfilehost.com/?fid=24438995911969398], but after installing, the phone went from 3.39.531.41 back to 3.39.531.7. Was the above zip file really the 531.41 version?
I tried to reinstall the 0PJAIMG for 531.41 downloaded earlier, but the phone said signature error.
I tried to install using the OTA zip from this link [http://fotadl-az.htc.com/secure/OTA_...kwvabkx6lv.zip] from Recovery mode but the phone said "E3001: Package expects build fingerprint of htc/himaul_tmous/htc_himaul:6.0/MRA58K/690290.41:user/release-keys or htc/himaul_tmous/htc_himaul:7.0/NRD90M/869604.6:user/release-keys; this device has htc/himaul_tmous/htc_himaul:6.0/MRA58K/690290.7:user/relea
E:Error in /sideload/package.zip (Status 7)
Installation aborted
You have any idea to go back to 531.41? Since the OTA message seemed to indicate it expected a 531.41 version?
Thanks
Ok. I was able to get back to 3.39.531.41 by getting the 0PJAIMG from AndroidFileHost.
After that, I went to Recovery Mode (using pwr + vol up after seeing the red triangle), chose Apply Update from SDCard, selected the OTA file for 4.27.531.6. This time It didn't give any error, at the end it appeared to get stuck for a long time at the line Script Succeeded Result was [/preload]. After about an hour, I turned off the phone and on again, now it is stuck at HTC logo splash screen.
Questions here:
1. Was the phone really stuck at the "script succeeded" line?
2. Didn't I wait long enough?
3. What should I have done at that time when it stopped at that "script succeeded" line?
4. What should I do at this splash screen? It has been like that for the last 10 minutes
Thanks
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
after over 10 hours of fiddeling around a found a really easy solution:
most of you know HWOTA helps with this, but the "normal" version wont work after flashing oreo. but this version is flashed via twrp and is still working!
but you will need a oreo compatible twrp, which you can find here
i know the links are to mate 9 software, but since the p10 and mate 9 are nearly identical, it works on the p10 as well
can you post the step by step guide?
i am on oreo 8.0.0.046 and want to flash another version, or downgrade to nougat because few things don't work on this version
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
failed install twrp- error find twrp 3.0.3, and i replaced to oero mate 9 recovery....
EDIT: success - problem was on the computer
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
i did sucsses to install twrp but on the second step, when i press on install on twrp, the phone restart to erocovey and failed to find the files. what am i doing wrong?
i think that i am stuck with that version forever....
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
johdost said:
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
Click to expand...
Click to collapse
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
t.h.i said:
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
Click to expand...
Click to collapse
EDIT : the process is sucsses, but its the same version.... 8.0.0.046
Bricked, no TWRP access, any ideas?
Hi.
I know this about a P10, I have a P10 Plus (VKY-L29C605), but the process should be similar, I think.
I bricked my phone after succesfully upgrading from B174 to B321 using HWOTA. After which I decided, since I was at it, to flash the Hyperplus Kernel. This led to a bootloop. To fix it I decided to just go ahead and HWOTA B321 all over again and get over it, and would have probably gone just fine, except I decided to rebrand (C605 > C432) while I was doing that, silly (no, stupid) mistake. This led to the brick I am currently expriencing, I have no recovery access, erecovery or TWRP.
So now I am left trying to unbrick the phone. I extracted the UPDATE.APP for both update_all_hw.zip and update.zip using the Huawei Extractor Tool with no difficulty, except unbricking methods ask for boot.img, which I could not find, so I went along without it and flashed: cust.img, recovery_ramdisk.img (using fastboot recovery_ramdisk command for Oreo), and system.img. All of the commands completed succesfully, but no shebang, still bricked and no recovery access. I figure this has to do with the rebrand as the result after executing the command "fastboot getvar vendorcountry" shows the rebrand pulled through (hw/eu 432).
I am currently downloading HWOTA8.zip (3GB worth of download) to see if I can do something it. I am also downloading the L29C432B360 OTA-FULL, since I believe I am not getting any progress becuase I used the updates for L29C605B321.
The kind people at funkyhuawei told me they could fix it with their tool, but I don't have the money for that right now.
I will post updates, but any ideas would be greatly appreciated.
Many of us have posted over this in the last couple of days. Seems like Funky Huawei unbrick tool was the mehtod to get it work for me. You could try that!
or use dc-phoenix for me it worked (= in the moment i try to capture the usb ports kommunikation so i have the tool with the aktual firmware longer for 3 days :silly:
would first give dc a try 20 bucks for 3 days is ok i think (=
johdost said:
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
Click to expand...
Click to collapse
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
So I was able to get the C432B360 firmware and I flashed it, but no I can't enter recovery mode because the battery is low (red lightning bolt/red led flash). Anybody know how to charge or force recovery mode boot from fastboot?
If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm
Greting
ure3808 said:
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
Click to expand...
Click to collapse
Greeting,
Can you explain the procedure of how to do it?
Thank you