{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix 6.1.2 (based on Oreo 8.1.0) for Samsung Galaxy Note N7000
DISCLAIMER :
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ROM INFO
This is unofficial source-built Resurrection Remix for Galaxy Note (n7000).
....
Yes, just simple as that. Be prepared to #GetResurrected !
*THIS ROM IS STILL IN TESTING PHASE!!!
ROM FEATURES
Probably, RROS should be the only ROM that have sooooo many features! It's too many to be listed here, really
ROM BUGS
Code:
- Display : (sometimes) During power off or reboot, it will freeze for a few seconds. Applies to Recovery Mode, Normal Android and Offline Charging.
- Camera : After every boot, Camera app needs to be launched twice then only it works. (tbc)
- Kernel : Display draining lots of battery (tbc)
This ROM is in testing phase at the moment, thus there might(should) be bugs yet to be found!
ROM INSTALLATION
*NEW USERS: Repartition system first, and install Bauner's TWRP !!!
1. Boot into TWRP (Power + Home + Volume Up)
2. If clean flash, wipe /data, /cache, /system
3. If you'd like to have f2fs, format /data (your internal SD content will be lost!) and /cache to f2fs.
4. Proceed into flashing ROM (install ZIP or sideload)
5. Proceed into flashing other ZIPs if any.
6. Reboot system. First boot takes about 10 minutes. Be patient
SIDE NOTES
- Device assert check is not removed for the time being. You need to remove the assert checking lines from ZIP file's updater-script so that the file starts with the word ui_print
- Builds are rootless, you have the option to flash SU addon on your own.
- When rebooting from Offline Charging mode/TWRP, sometimes it will freeze (see the above ROM BUGS section). When you noticed it freeze, just let go power button and leave it, it will reboot in a few seconds. (you should able to understand this if you read the ROM BUGS section)
SOURCES
Full credits to @rINanDO (galaxys2), @bauner (n7000), @linusdan (i9100's RROS manifests reference), @benbois (former RR maintainer for n7000), Resurection Remix, LineageOS, long-lived CyanogenMod, and other n7000/i9100/smdk4x10 developers. And also @ChronoMonochrome for his help and guidance!
https://github.com/leewp14/local_manifests/tree/rr-o
XDA:DevDB Information
Resurrection Remix 6 for N7000, ROM for the Samsung Galaxy Note GT-N7000
Contributors
lee.wp14, bauner
ROM OS Version: 8.x Oreo
Version Information
Status: Testing
Created 2018-08-21
Last Updated 2019-01-20
DOWNLOADS
Builds are uploaded to my Google Drive. Click here to access.
Look under directory : n7000 > rr
*DO NOT MIRROR WITHOUT MY PERMISSION. Thank you.
CHANGELOG
Code:
[U][B]20190114[/B][/U]
- smdk4412 : iosched default to noop
- smdk4412 : implement powersuspend, thanks to @ChronoMonochrome
- n7000 : add ro.lineage.version to trick CMSU
- galaxys2-common : reconfigure zRAM
[U][B]20190111[/B][/U]
- initial build
[U][B]20190110[/B][/U]
- Initial build (internal)
I will only write changelog for tested working builds :good: try at your own risk if you want to test it before me :3
Those inside .trash folder are my test builds. Please, avoid this folder and other no changelog written build if you want to play safe. Thanks
SCREENSHOTS
Coming soon :3
Hi @lee.wp14,
Thank you, thank you.... Totally appreciate your efforts dude. I was hoping to catch this rom on some of my old relic devices, HP Touchpad, S2 and N7000. If I didn't use my N7000 as my daily driver MAIN phone, I'd be flashing right away to test and help/feedback....
But I know as soon as my rom starts playing up, and I have to wipe... I shall certainly test this as soon as I can after...
Thank you again for giving your time, and still knocking out roms... Esp, RR roms !!!
Thanks, Lister
Hi @lee.wp14,
Looks like I will be finally be able to get around to testing your rom....
My original N7000 HAS DIED, and so have ordered myself a replacement N7000. So will wipe it of it's current config when it arrives, and dive straight into this rom.... and give you my feedback.
Are you still providing updates/syncs to the latest repo's for this rom...??
Thanks, Lister
Lister Of Smeg said:
Hi @lee.wp14,
Looks like I will be finally be able to get around to testing your rom....
My original N7000 HAS DIED, and so have ordered myself a replacement N7000. So will wipe it of it's current config when it arrives, and dive straight into this rom.... and give you my feedback.
Are you still providing updates/syncs to the latest repo's for this rom...??
Thanks, Lister
Click to expand...
Click to collapse
Hi @Lister Of Smeg
It is sad to hear that.. but anyway just to inform you that I won't be continuing development on this phone anymore, it is kind of hard to develop when I didn't have a n7000 around me. Additionally, I'm quite busy for my public examinations lately. And my knowledge in android development is little to nothing, it will be time consuming to develop on an old device which requires lots of workarounds, cherrypickes and patches.
I thank you for your support in my development! I hope that I will be able to get a n7000 in future, and maybe I will try to develop for this phone if my time allows. Currently I'm using an old Samsung S Advance... quite disappointing, can't even get nougat running properly on this phone. But at least it has an AMOLED screen...
Hi @lee.wp14,
Aye, you're telling me... I'm more annoyed that the death of the Note came out of nowhere... There was no symptoms leading up to it, no strange behaviour. Other than woke one morning to find it had rebooted and stuck on the Splash screen. Thought nothing of it, and rebooted it again as it was stuck on the Samsung N7000 screen. Then after that, it's been no more...
More so, as didn't get chance to back any data stored locally on the device, as it's not detected in Windows. It appears a common issue, affecting a lot of Samsung models... But most talk about it on YouTube, and all fixed theres...
Still, I've ordered myself another N7000 replacement (I hope it's in as good a condition as mine was...) and fully working. I have so many roms for this phone, and wouldn't know which phone to get next if needs be. Purely sentimental reasons, I don't wish to change my Sim or phone number, as it's the original one Ive ever had, since getting my first mobile phone back in the 90's (a long time!!) lol.
I fear if this Note goes (I still have some S2's, that it would work on) I will be forced to move to Micro or Nano Sim.. lol
Anyway, no worries mate... Thank you for letting me know. And much appreciated, all your efforts up till now. You've knocked out and provided some damn good roms... Esp dedication towards the RR roms. You claim your knowledge is little to none, but don't be so hard on yourself. You've managed to release some roms, and patches, and thats MORE THAN ANY OF US CAN DO !!!
Thanks again, for all you done so far... Good luck with your exams !! :good::good: and who knows, hopefully in the future, you maybe back again... with an N7000
Once my replacement arrives, I will be sure to let you know about the Oreo RR rom....
Thanks again, Lister...
lee.wp14 said:
Hi @Lister Of Smeg
It is sad to hear that.. but anyway just to inform you that I won't be continuing development on this phone anymore, it is kind of hard to develop when I didn't have a n7000 around me. Additionally, I'm quite busy for my public examinations lately. And my knowledge in android development is little to nothing, it will be time consuming to develop on an old device which requires lots of workarounds, cherrypickes and patches.
I thank you for your support in my development! I hope that I will be able to get a n7000 in future, and maybe I will try to develop for this phone if my time allows. Currently I'm using an old Samsung S Advance... quite disappointing, can't even get nougat running properly on this phone. But at least it has an AMOLED screen...
Click to expand...
Click to collapse
Hi @lee.wp14,
Do you happen to have a new link for the download, as i cant see that rom on the link provided??
Many thanks, Lister
Thread closed by OP request
Thread re-opened.
Camo.
EDIT : some cleaning works...
EDIT : some cleaning works...
Initial Public Build 20190111
Refer OP for more *detailed* information. Downloads at second post.
*****This is different with the one I uploaded earlier this morning (yes the file names are the same). You can identify by the file size. This latest build has a smaller file size (check the file size in bytes so that you won't get it wrong). This latest build is uploaded around 8PM at UTC+8 while the earlier one is uploaded around 2AM UTC+8 (it is now in the .trash folder).
Build works pretty well as for now, but anything could happen - DO NOT FLASH IF YOU'RE NOT DARE TO RISK.
*you need to remove assert lines to install this build in TWRP, Google search if you don't know how to.
*it is actually the first line inside META-INF/com/google/android/updater-script. Remove it and replace the file inside the one in the zip.
*you need to get some little extra free space for /system if you want to install GAPPS (pico only!). Alternatively, you can repartition your /system to make it larger than 1GB, using REPIT. You can also remove GoogleTTS inside the opengapps pico zip file (edit the installer.sh, remove the line under pico_gapps_list=)
*please do not use your note 1 when charging. by then it is not charging but draining instead.
*button backlights are disabled. Feedback me if you guys need the button lights (I find them ugly tho)
*enable usb functions under Settings > Connected Devices
*camera needs to open twice after every boot. I haven't check into this yet because I'm quite tired today. However this only happens to my current installation, and I don't think I made changes related to camera in this build. So I need someone to confirm this.
EDIT : some cleaning works...
I will flash it too. Currently on Bauners 15.1 v3.
After about one week of testing, here is a fairly usable RR Oreo build for n7000...
Notable changes :
- No more battery drain during deepsleep and Wifi turned on
- Internal SU management working. Flash Lineage's SU addon to get root.
Notes :
- Screenshot uploaded to second post! (Not yet I'm quite busy lately)
- Phone is draining quite a lot of power when screen is on (not sure, as my previous phone has better battery life, and I'm not get used to n7000's power consumption yet)
- To install GAPPS, refer to post #12 for information on how to install. Or, you can repartition your /system to >1GB
Hi lee.wp14,
This rom will have the possibility to autoboot when power is plugged in to the phone?
Thanks
khrisstyan said:
Hi lee.wp14,
This rom will have the possibility to autoboot when power is plugged in to the phone?
Thanks
Click to expand...
Click to collapse
No. If you require this will need modification to the kernel ramdisk.
lee.wp14 said:
No. If you require this will need modification to the kernel ramdisk.
Click to expand...
Click to collapse
Thanks for the quick reply.
Can you patch the rom with this modification?
PS: the rom is 8.0 or 8.1 ? I want to know what version of gapps to download.
Thank you
khrisstyan said:
Can you patch the rom with this modification?
Click to expand...
Click to collapse
Not really, I don't see it necessary.
PS: the rom is 8.0 or 8.1 ? I want to know what version of gapps to download.
Thank you
Click to expand...
Click to collapse
8.1.0
Be noted that even pico gapps is unable to install. You need to exclude GoogleTTS from the installer or resize /system to >1GB
lee.wp14 said:
Not really, I don't see it necessary.
Click to expand...
Click to collapse
That would be nice to have, maybe another rom with this option activated.This is the only thing stoping many of us to use the Note permanently in the car.
lee.wp14 said:
8.1.0
Be noted that even pico gapps is unable to install. You need to exclude GoogleTTS from the installer or resize /system to >1GB
Click to expand...
Click to collapse
System is already resized to 1.5gb , using RR Nougat in this moment.
Maybe I will flash it tomorrow and come with a feedback.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome an update is finally here and ready to install the new version includes new performance improvements and fixes
CHANGELOG IS WITH THE LINK CLICK THE LINK AND CHANGELOG AND DOWNLOAD WILL BE SHOWN.
What's Broken:
NOTE: there will be things not working or just broken if you experience these keep reporting them even if alreasy reported them, tgese issues will eventually be fixed and takes time to fix
Features:
* Full FREE Services and Connectivity with Our Online Cloud Services
* Authenticate Your Google Account using Outlr Online Servers To Use your Google Account with our modded Account Apps For Online Gaming
* Instant Boot ups
* Easily be able to Change the Density of the OS
* New Tool called System Update to easily install OTA Updates
* You can change how the CPU Processes Information eqally or dynamically after enabling developer options
* Run The OS and Apps/Games up 50fps
* Fast Downloading And Uploading Modules
* Ipv6 and ipv4 Support accross multiplatform services and also UPNP ipv4 and ipv6 support amd much more
WARNING: this update will not format your internal storage.
NOTE FOR THEMERS: now developers who are experienced with theming can update or build their cm themes for lollipop or this rom enjoy developing
Development Status: Active
Note: this rom has a gapps package in the flasher witch means the flasher intalls to os first with no gapps, then it access a folder named "gapps" to flash the package next so you dont have to, its a minimal package and we did it like that so it doesnt infinge googles terms with Cyanogenmod.
Im also Cyberdev i just signed up on xda with google login cause i forgot the password and email password to it.
THIS ROM IS ONLY FOR THE:
Donate Now
Insallation Instructions:
Code:
[B]instructions:
Using TWRP?
Reboot into your Recovery by holding the vol up and holding it while turning the phone on.
Step 1: go to the tab called "Wipe" and click Manual Wipe
Step 2: format the folliwing partitions
* /cache
* /data
* /system
* Dalvik-Cache
Step 3: go to the tab called "Install" and pick the storage unit you have this rom placed in and click the zip
Step 4: once you clicked the the rom slide the bar to the right to accept install and the rom will install
Step 5: once it says done click the "Reboot System" tab and done setup your phone after it boots
Using CWM OR CWM TOUCH?
Instructions:
Step 1: reboot into your recovery by pressing and holding the vol up button while turning the phone on
Step 2: niw your in recovery go to "Mounts & Storage" and format the following partitions
* /data
* /cache
* /system
* /boot (the does a clean kernel wipe for tye new kernel the flasher will install to)
Step 3: then go to the main menu and go to the option says "Advance" and wipe the following partition
* Wipe Dalvik-Cache
Step 4: now go to the main menu and click install zip abd click werever your rom is in and click it
Step 5: click yes to install and it will install the rom once done go to the main menu and click reboot and setup your phone after full boot[/B]
View Our New Kauncher Below, to view more screnshots go to the SCREENSHOTS Tab:
XDA:DevDB Information
GamerROM OS, ROM for the Sprint Samsung Galaxy S 4
Contributors
g7755725
Source Code: https://github.com/g7755725/cyanogenmod-12.1/blob/master/kernel
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: v1.8.3
Stable Release Date: 2015-05-04
Beta Release Date: 2015-04-15
Created 2015-04-01
Last Updated 2015-05-04
XDA:DevDB Information
GamerROM OS, ROM for the Sprint Samsung Galaxy S 4
Contributors
g7755725
Source Code: https://github.com/CyanogenMod/android_device_samsung_jfltespr
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: v2.1.5
Stable Release Date: 2015-06-06
Created 2015-05-09
Last Updated 2015-06-06
Figured id try it out. Running great so far, boots up fast! GPS is working, i have not yet been able to try IR remote.
Only problem i encountered was flashing xposed arm. Which has worked for me on CM nightlies and AICP.
Thank you! Excited mainly to see battery life. Which has been a problem for me on other LP roms.
your welcome
lootbooper said:
Figured id try it out. Running great so far, boots up fast! GPS is working, i have not yet been able to try IR remote.
Only problem i encountered was flashing xposed arm. Which has worked for me on CM nightlies and AICP.
Thank you! Excited mainly to see battery life. Which has been a problem for me on other LP roms.
Click to expand...
Click to collapse
Well xposed isnt v5.1 compatible yet, but if you see any bugs feel free to report them and thanks and enjoy
g7755725 said:
Well xposed isnt v5.1 compatible yet, but if you see any bugs feel free to report them and thanks and enjoy
Click to expand...
Click to collapse
Ah, I was not aware. Guess i need to read more. No biggie though, this rom is stupid fast i can deal without it. :good:
enjoy
lootbooper said:
Ah, I was not aware. Guess i need to read more. No biggie though, this rom is stupid fast i can deal without it. :good:
Click to expand...
Click to collapse
Yea saw a xda yputube video that he said it isnt yet compatible but its getting there also im thinking of having it do muti rendring with all the cpu cores for better performance and im thinking if zipaligning my rom to make it even better
g7755725 said:
Yea saw a xda yputube video that he said it isnt yet compatible but its getting there also im thinking of having it do muti rendring with all the cpu cores for better performance and im thinking if zipaligning my rom to make it even better
Click to expand...
Click to collapse
Playing around with things more ive noticed a bit of lag in transitions, animations of menus and such. Opening the dialer is a big one. Almost like things are opening faster than it can keep up with, if that makes sense.
lootbooper said:
Playing around with things more ive noticed a bit of lag in transitions, animations of menus and such. Opening the dialer is a big one. Almost like things are opening faster than it can keep up with, if that makes sense.
Click to expand...
Click to collapse
It makes sense i get them too ill fix those in the next update
Funny i havent tested it until now, It crashes when making or recieving a call. Connects, but no sound then reboots.
Im sorry
lootbooper said:
Funny i havent tested it until now, It crashes when making or recieving a call. Connects, but no sound then reboots.
Click to expand...
Click to collapse
Sorry for our having connectivity issues, i can help troukbleshoot to get bit of more infor can you get a bug report and send it to my email [email protected]
Hi, Thank you for your contributions. The link you provide for source is not source...it is just another thread on another forum.
Please provide kernel source link as required by GPLv2 and XDA requirements.
Thanks
FNSM
A feature list would be nice too
bilgerryan said:
A feature list would be nice too
Click to expand...
Click to collapse
Feature list gis coming soon want to get my rom mostly in order first
g7755725 said:
Feature list gis coming soon want to get my rom mostly in order first
Click to expand...
Click to collapse
In the future do that before posting[emoji1] I'm just trying to be helpful because it makes you look bad when you don't have everything ready when it's posted. Have a great day!
bilgerryan said:
In the future do that before posting[emoji1] I'm just trying to be helpful because it makes you look bad when you don't have everything ready when it's posted. Have a great day!
Click to expand...
Click to collapse
Well im sure enough the rom explains utself in time but i ant to hwve enough features inckuded before posting a featue list so the rom doesnt sound boring and lame
had a problem with this rom, when someone called me couldn't answer the call nor call them back... phone kept freezing, other than that nice rom
elmont14 said:
had a problem with this rom, when someone called me couldn't answer the call nor call them back... phone kept freezing, other than that nice rom
Click to expand...
Click to collapse
Try the new update i just now pushed it out its v1.5.1
Can you post some screenshots?
sure give me a min
pedrito0906 said:
Can you post some screenshots?
Click to expand...
Click to collapse
Sure give me a min
flashed new version, still having problems with phone calls. I can hit answer but get silence, screen goes black then have to hold power to reboot. Does this have anything to do with modem? Im getting 3/4g data like normal. On the plus side, everything is more smooth than previous version so glad to see some improvement :good:
lootbooper said:
flashed new version, still having problems with phone calls. I can hit answer but get silence, screen goes black then have to hold power to reboot. Does this have anything to do with modem? Im getting 3/4g data like normal. On the plus side, everything is more smooth than previous version so glad to see some improvement :good:
Click to expand...
Click to collapse
Maybe try flsshing a new modem but everything will be eventually fixed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
What is Nameless Rom?
NamelessROM Gerrit Review
Hey guys!!
This is the Nameless rom for n7000 built by me.
Feel free to coment and report bugs and hit that thanks button if you like my work.
Thanks to Nameless for their hard work and thanks to Bauner for his build tree.
Hope you enjoy!! Cheers!!
DISCLAIMER
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMPORTANT INFORMATIONS
Click to expand...
Click to collapse
IMPORTANT INFORMATIONS
-To enable developer options, go to setting>About Phone and tap the build number 7 times.
- Device is not rooted.Flash provided superSU package to get root access.
- If the keyboard doesn't work please go to settings- Language and input- current keyboard and enable hardware option
DOWNLOAD LINKS
Rom: 31/07/2015
Gapps: PAgapps
Root: SuperSU
Whats New
- Updated Sources
- build.prop tweaks
Older Downloads
5.1.1
01/06/2015
10/05/2015
5.1
20/04/2015
Installation Instructions
Download zip to your sdcard
Make sure you're using a Kitkat Compatible Recovery
Boot into Recovery
Wipe all your data
Flash zip from sdcard
(Optional)Flash Google Apps.zip from sdcard
Reboot
XDA:DevDB Information
Nameless Rom for n7000, ROM for the Samsung Galaxy Note GT-N7000
Contributors
sai24
Sources: https://github.com/sainath24
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Kitkat compatible recovery
Based On: CM
Version Information
Status: Beta
Current Beta Version: #5
Beta Release Date: 2015-07-31
Created 2015-04-19
Last Updated 2015-07-31
Review??
Review of the rom plz? Anyone?
SIr, I don't think that you can expect reviews so soon. Rom was published only 2 hrs before your post. Maybe you should try to install it and write your own review? I'm installing it right now and I'll report back after I finish all testing.
Ok, install finished, here are the results:
01 - First boot takes waaaay too long, but it booted eventually
02 - Mobile network not available, I can not make calls or send sms, "Error while searching for networks"
03 - WiFi is not working, unable to turn it on, also faced reboot while trying to turn it on.
05 - Battery temp is around 49C after install
06 - Just faced another random reboot while checking previous.
Hope you'll fix this soon. Back to the NightOwl for now
Thanks, anyway
Your website is down mate. Hope you can list some of the features.
super_operater said:
SIr, I don't think that you can expect reviews so soon. Rom was published only 2 hrs before your post. Maybe you should try to install it and write your own review? I'm installing it right now and I'll report back after I finish all testing.
Ok, install finished, here are the results:
01 - First boot takes waaaay too long, but it booted eventually
02 - Mobile network not available, I can not make calls or send sms, "Error while searching for networks"
03 - WiFi is not working, unable to turn it on, also faced reboot while trying to turn it on.
05 - Battery temp is around 49C after install
06 - Just faced another random reboot while checking previous.
Hope you'll fix this soon. Back to the NightOwl for now
Thanks, anyway
Click to expand...
Click to collapse
So many issues??!! Does anybody face the same thing too? Anyway, I'll try to make it better. Thanks for trying it.
Also, I'm unable to flash NightOwl now, I'm getting error in recovery. It says: This file is for N7000 and this device is GT-I9100 Guess I'll have to try using odin and start from scratch...
edit: succesfully returned to NightOwl by using JB kernel first and then @bauner's L kernel and rom afterwards. Maybe you provided us wrong recovery inside rom zip?
sai24 said:
So many issues??!! Does anybody face the same thing too? Anyway, I'll try to make it better. Thanks for trying it.
Click to expand...
Click to collapse
Same issues here: no mobile network, no wifi and several reboots.
Back to RR.
super_operater said:
Also, I'm unable to flash NightOwl now, I'm getting error in recovery. It says: This file is for N7000 and this device is GT-I9100 Guess I'll have to try using odin and start from scratch...
Click to expand...
Click to collapse
I could go back to RR using a nandroid backup
Hi @sai24,
Welcome to N7000 forums... So glad to see you've joined us, and are contributing to N7000 roms too... I've seen, and admired your work over on the S2 / i9100 forums... As tested your roms for that device, and I soon plan to try / test this rom too....
Keep up the good work, its a welcomed sight to see you on these forums too...
Lister
sai24 said:
So many issues??!! Does anybody face the same thing too? Anyway, I'll try to make it better. Thanks for trying it.
Click to expand...
Click to collapse
Lister Of Smeg said:
Hi @sai24,
Welcome to N7000 forums... So glad to see you've joined us, and are contributing to N7000 roms too... I've seen, and admired your work over on the S2 / i9100 forums... As tested your roms for that device, and I soon plan to try / test this rom too....
Keep up the good work, its a welcomed sight to see you on these forums too...
Lister
Click to expand...
Click to collapse
Good news to see another intelligent dev!!!!!!
Keep up the good work!
New Update
Hey guys, Beta 2 is up. I think this will fix all the issues caused by the first build. Please do try this too. Thanks a lot.
sai24 said:
Hey guys, Beta 2 is up. I think this will fix all the issues caused by the first build. Please do try this too. Thanks a lot.
Click to expand...
Click to collapse
Great News that our device got another Lollipop Rom.
Will flash and taste the dish soonest possible.
Hope upcoming future build would be more awesome with lots of features and tweaks.
Regards
Please provide some feature description and screenshots.
Thanks & Cheers.
Flashed and problems of last beta hve been solved.
Wifi and mobile network working. No initial reboots.
Keybord must be activated to use to configure wifi or google account.
Testing now.
Waiting to know about video playback and 1080P recording and screenshot thanks for the rom
anyone tell me the rom issues ?
and its fast nightowl ?
ajhier1 said:
anyone tell me the rom issues ?
and its fast nightowl ?
Click to expand...
Click to collapse
Hi mate,
This rom is on eta stage. So you must accept some bugs and issues. If you find any thing post it here. Developer working on this. hope near feature we can taste an awesome Lollipop Rom on our device.
Thanks.
urviagarwal said:
Please provide some feature description and screenshots.
Thanks & Cheers.
Click to expand...
Click to collapse
+1
It would be nice to write some more info about rom and a few screenshots, also. It can be useful for other members...
thanks.. this a good rom for my Note
nandunk said:
thanks.. this a good rom for my Note
Click to expand...
Click to collapse
network is working ?
sanioclement said:
network is working ?
Click to expand...
Click to collapse
Yes, network is working..
i am sorry, i bad in english
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This ROM is Abandoned as Cyanogen pulled the plug on CyanogenMod
As soon as Lineage OS build farm is setup, it'll return as Lineage OS. A new topic will be started. In the mean time, building from source is an option.
This project is the official continuation of the http://forum.xda-developers.com/tab-s2/development/rom-cyanogenmod-13-0-tab-s2-9-7-t3397682]unofficial build.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
First I would like to thank the following developers :
@RaymanFX
@CTXz
I used @RaymanFX's T815 image to base my cm 13.0 build on.
Before you start
THIS ROM IS ONLY FOR THE SM-T810
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
About the ROM
Current state of ROM : testing
Everything except what's reported below is working. Nothing 'fixed' yet, first build.
What is Fixed
What is not working
Important
Fingerprint scanner not working
Minor
Limited wifi 5GHz support (channels above 100 give issues)
Compass is 180 degrees mis-aligned
About says 'Phone' instead of 'Tablet' (haven't found any other issues, other then text)
Instructions
How to install CM13.0
If you haven't run stock Android 6.x, flash that first with odin. (image won't boot without this step)
If you don't have TWRP yet, get it from here : TWRP by ashyx
Download the ROM and the Gapps that are located below to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home and select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home and select the ROM
After you selected the ROM swipe below to install it
After the ROM has installed flash the Gapps
When all of this is done, reboot into system, wait, and enjoy CM12.1
How to ROOT
In CM 13.0 Enable the developer options
Select Root access
Select Apps Only
Done
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of CM's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Changelog
Code:
**********
17-07-2016 - Corrected last noop usage to bfq in /init.samsung.rc
**********
11-07-2016 - Recompile UNOFFICIAL BETA build with latest CM patches.
**********
05-07-2016 - Enabled multi user in UNOFFICIAL BETA build.
**********
29-06-2016 - 1st Nightly build
- Changelog limited to changes in gts210wifi sources, updates in gts2-common and other general parts are included via nightly system.
**********
Downloads
All CM 13.0 Nightly releases can be found here: http://get.cm/?device=gts210wifi
All UNOFFICIAL BETA versions van be found here: https://www.androidfilehost.com/?w=files&flid=68015
Recommended GAPPS by opengapps.org : http://opengapps.org/ (I use pico)
Source
Special Thanks to @RaymanFX for releasing his Exynos 5433 source, without him this ROM would most likely not be possible!
All my sources can be found here : https://github.com/CyanogenMod/android_device_samsung_gts210wifi
Screenshots
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
XDA:DevDB Information
CyanogenMod 13.0 for Samsung Galaxy Tab S2 9.7 T810, ROM for the Samsung Galaxy Tab S2
Contributors
T_I,CTXz, Sub77, Moonbutt74, RaymanFX, Hennymcc
Source Code: https://github.com/Galaxy-Tab-S2
ROM OS Version: 6.0.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-06-13
Last Updated 2016-06-27
XDA:DevDB Information
CyanogenMod 13.0 for Tab S2 9.7 wifi, ROM for the Samsung Galaxy Tab S2
Contributors
T_I, RaymanFX, CTXz
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Android 6.x flashed at least once before install
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2016-06-29
Last Updated 2017-01-08
Great to see the journey resulting in an official nightly. Well done.
Sent from my A0001 using Tapatalk
Fritzy62 said:
Great to see the journey resulting in an official nightly. Well done.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks, I'm totally happy. Looks nice, even with my dark theme...
Sent from my T810 running cm-13.0
This awesome love your work just one thing when I try to format my SD card as internal it just gets corrupted why is this
Delta wolf said:
This awesome love your work just one thing when I try to format my SD card as internal it just gets corrupted why is this
Click to expand...
Click to collapse
Can't think of a reason why it should do that. (and why you should do that, with 32 Gb internal)
I'm currently out of large enough SD's so I could transfer internal to external.
Does a format as regular card work?
Can you get a logcat (start before format, stop after it failed) of the format as internal and when regular fails, one of that action as well?
Congratulations, all your hard work is paying off. Great stuff sir. Love your ROM. ?
Sent from my SM-T810 using XDA-Developers mobile app
Not sure how to get logcat but formatting as portable works while formating as internal it all goes through says Sd card is working I hit done and it says corrupted EDIT***: some other people were having this issue on different devices it appears it was an issue with cm 13 that got patched in a different nightly likely the same issue here
---------- Post added at 03:13 PM ---------- Previous post was at 02:27 PM ----------
So formating as internal still goes corrupt but when entering twrp to erase the Sd twrp says it can't mount adoptable storage unit
Thanks for your hard work.
As I am still on the "unofficial" build, do I need to clean flash the official nightly ?
Edit:
Did a clean flash, to on the safe side. Unfortunately though I still cannot get the quicksettings to. I don't even the option in my menu.
Incase embedding doesn't work: https://www.youtube.com/watch?v=tp6c60Andgk
OK so I have a floating logcat did the format and stopped it how do I send it over can't find option to save the log EDIT**** I FOUND HOW TO SAVE but won't let me upload I can send an email with it if that is OK? And only reason I'm doing it is because I have a bunch of big apps and a lot of music I had 2gb free before I erased everything and flashed cm also if I may request a close all button for closing out application
Thank you for the CM port! I am testing this on my tab and like others say, Netflix does not work (cannot find the liboecryptXXX to remove or change filename) and sd card is always corrupt no matter which option you choose (64GB SD card). Let me know if there is anything I need to send to help.
akiradavis said:
Thank you for the CM port! I am testing this on my tab and like others say, Netflix does not work (cannot find the liboecryptXXX to remove or change filename) and sd card is always corrupt no matter which option you choose (64GB SD card). Let me know if there is anything I need to send to help.
Click to expand...
Click to collapse
Netflix seems to be working for me I downloaded the tablet version from Google play store I did get a Google play services error but just closed app and opened again and everything worked fine was watching an episode of walking dead
EDIT: just tried again and now all it says is loading I prefer to use kodi so not a big deal to me
Delta wolf said:
Netflix seems to be working for me I downloaded the tablet version from Google play store I did get a Google play services error but just closed app and opened again and everything worked fine was watching an episode of walking dead
Click to expand...
Click to collapse
Where can I find the tablet version of Netflix? I only see the one app in the Play Store.
EDIT: Also - I am on version 13.0-20160629-NIGHTLY-gts210wifi - Maybe this nightly broke Netflix?
---------- Post added at 02:10 PM ---------- Previous post was at 02:03 PM ----------
Delta wolf said:
Netflix seems to be working for me I downloaded the tablet version from Google play store I did get a Google play services error but just closed app and opened again and everything worked fine was watching an episode of walking dead
EDIT: just tried again and now all it says is loading I prefer to use kodi so not a big deal to me
Click to expand...
Click to collapse
Ahh, just saw this. Yeah, it appears its down. But at least ChromeCast works!
Wow. Official for the T810. Nice job! Should hopefully be somewhat soon before the 710 gets it aswell. I'm thinking of getting a 713 to learn this on. Good stuff!
Nice work! This may just get me off my year-long break from flashing.
Sent from my SM-G935T using Tapatalk
Thanks TI for all the hard work in getting this ROM running on our S2's, it's running really nice and smooth for me and I thank you and those who helped for putting forth all the effort in making it happen, it's much better than TW IMO. :good:
Idk if it's OK to post a request in this thread but can someone in the community please create a custom under/overclock/under volt kernel for this ROM? I was spoiled using the ROM and custom kernel that Engine95 made for Lollipop TW and it seemed to take my S2 to the next level especially with battery savings, adjusting the BIG processor down to 500mhz really had a noticeable impact. Idk what settings he used for the undervolting but he set the oc parameters for the little processor up to 1.6ghz and the BIG from 500 to 2.2ghz on the interactive governor and my S2 was running great. I can only imagine what this ROM would do with a similar custom kernel but I know the performance would make our S2's jump to the next level. Thanks again :good:
Is it also possible to add multi user support
pilspeda said:
Thanks for your hard work.
As I am still on the "unofficial" build, do I need to clean flash the official nightly ?
Edit:
Did a clean flash, to on the safe side. Unfortunately though I still cannot get the quicksettings to. I don't even the option in my menu.
Incase embedding doesn't work: https://www.youtube.com/watch?v=tp6c60Andgk
Click to expand...
Click to collapse
Embedded didn't work (here). Thanks for the video, learning more about android every day. I have the option set to right and when I turn it off nothing changes, so I can confirm, it doesn't work. Will have to check on the phone what it should do though and then look into it.
Delta wolf said:
OK so I have a floating logcat did the format and stopped it how do I send it over can't find option to save the log EDIT**** I FOUND HOW TO SAVE but won't let me upload I can send an email with it if that is OK? And only reason I'm doing it is because I have a bunch of big apps and a lot of music I had 2gb free before I erased everything and flashed cm also if I may request a close all button for closing out application
Click to expand...
Click to collapse
Emailing would be fine. There is a site to share logs online, but I've forgotten which one that is. (will look into that as well)
akiradavis said:
Thank you for the CM port! I am testing this on my tab and like others say, Netflix does not work (cannot find the liboecryptXXX to remove or change filename) and sd card is always corrupt no matter which option you choose (64GB SD card). Let me know if there is anything I need to send to help.
Click to expand...
Click to collapse
I'm using 32 and didn't need to format. Will test.
Nandr0idC0nsumer said:
Wow. Official for the T810. Nice job! Should hopefully be somewhat soon before the 710 gets it aswell. I'm thinking of getting a 713 to learn this on. Good stuff!
Click to expand...
Click to collapse
The T713 is snapdragin, not exynos, different base. I don't know if you can use the common we have, I guess not, as that one depends on the exynos libs.
Towle said:
Nice work! This may just get me off my year-long break from flashing.
Click to expand...
Click to collapse
A whole year without flashing? I select my devices on the option to flash... (when no image available, I'll build )
Welcome back to the light.
At the moment the rom is on phone mode. For multiuser etc. you have to set android to tablet mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub... and at CarbonROM Gerrit.
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash!
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
We recommend MindTheGApps. OpenGApps should work, but please make sure you clearly mention the gapps you're using when reporting bugs.
Notice:
For this ROM to work you need to use the latest ODM Images. If you need additional guidance on how to do that, please refer to Sonys Guide on how to flash an ODM Image.
Get CarbonROM
Changelog
Join the CarbonROM Discord server
GitHub
Gerrit
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonROM, ROM for the Sony Xperia XZ
Contributors
Myself5, CarbonROM
Source Code: https://github.com/CarbonROM
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Nightly
Created 2018-03-31
Last Updated 2018-07-19
No one tried this rom yet? I have a problem over here. It keeps asking for password after the CarbonROM logo even though I wipe everything clear, any ideas? What I was doing was flash 41.3.A.2.99 with everything wiped, flash ODM, flash TWRP, flash the rom and then Pico OpenGapps. Something wrong with my procedure? Thanks in advance.
EDIT1 : Oh yeah, forgot to mention my device is F8332, it isn't supported?
LuthfiKun said:
No one tried this rom yet? I have a problem over here. It keeps asking for password after the CarbonROM logo even though I wipe everything clear, any ideas? What I was doing was flash 41.3.A.2.99 with everything wiped, flash ODM, flash TWRP, flash the rom and then Pico OpenGapps. Something wrong with my procedure? Thanks in advance.
EDIT1 : Oh yeah, forgot to mention my device is F8332, it isn't supported?
Click to expand...
Click to collapse
Use the "format data" option in TWRP to get rid of encryption, wipe doesn't clear encryption. If coming from stock, thats necessary unfortunately due to differences in the encryption used. Otherwise (if coming from AOSP) the password its asking for would be the one you used before.
Dual sim support?
Myself5 said:
Use the "format data" option in TWRP to get rid of encryption, wipe doesn't clear encryption. If coming from stock, thats necessary unfortunately due to differences in the encryption used. Otherwise (if coming from AOSP) the password its asking for would be the one you used before.
Click to expand...
Click to collapse
Alright format it is.
agentsandy007 said:
Dual sim support?
Click to expand...
Click to collapse
No it isn't. At least out of the box. You can find a patch on Sony AOSP Build thread.
Volte Supported??
First of all, thanks alot @Myself5 and all other devs, who are working hard to bring this to our XZ :good:
My experiences after 1 day:
- rom is very smooth and snappy.
- root via Magisk v16 & Xposed 90.1-beta3 (systemless) works flawlessly
- the fp sensor always works, but it's not as sensitive as with stock
- night light worked - until I've installed Substratum and a Substratum theme, but after that it doesn't work anymore (even after deactivating, uninstalling the theme, a system restart and deinstalling the Substratum app it sill doesn't work). Also a dirty flash of the rom.zip didn't help to get it working again.
- the build-in camera takes acceptable pics (not as well as the stock camera, but acceptable); also focussing is a little slower than stock. Another thing is, it's not possible to chance the location to save the pics to the ext. sdcard.
- formatted as a portable storage, the ext. sdcard item on the left of the status bar can't be removed (see attachement)
- the battery consumption is a bit high (from 100 % to 98 % in 1 h - without doing anything)
But in the whole, it's really promising for th 1st official build :good::good::good:
Klaus N. said:
First of all, thanks alot @Myself5 and all other devs, who are working hard to bring this to our XZ :good:
My experiences after 1 day:
- rom is very smooth and snappy.
- root via Magisk v16 & Xposed 90.1-beta3 (systemless) works flawlessly
- the fp sensor always works, but it's not as sensitive as with stock
- night light worked - until I've installed Substratum and a Substratum theme, but after that it doesn't work anymore (even after deactivating, uninstalling the theme, a system restart and deinstalling the Substratum app it sill doesn't work). Also a dirty flash of the rom.zip didn't help to get it working again.
- the build-in camera takes acceptable pics (not as well as the stock camera, but acceptable); also focussing is a little slower than stock. Another thing is, it's not possible to chance the location to save the pics to the ext. sdcard.
- formatted as a portable storage, the ext. sdcard item on the left of the status bar can't be removed (see attachement)
- the battery consumption is a bit high (from 100 % to 98 % in 1 h - without doing anything)
But in the whole, it's really promising for th 1st official build :good::good::good:
Click to expand...
Click to collapse
Hello, is the battery life when used good ? As good as stock ?
And does it have that bug when if you record video the result will be green ?
Can you upload screen recording of rom from home to settings and other functions.
I plan on flashing this soon, but I figured I'd tell you, your link to the Carbon FAQ is broken.
ilininja said:
Hello, is the battery life when used good ? As good as stock ?
And does it have that bug when if you record video the result will be green ?
Click to expand...
Click to collapse
The battery consumption while in use is ok. But my device doesn't go into deepsleep while the screen is off. So I had lost about 23 % in 10 hrs - leaving the device untouched!
Video recording works; I haven't noticed that bug.
Saroj11488 said:
Can you upload screen recording of rom from home to settings and other functions.
Click to expand...
Click to collapse
Sorry, I went back to stock for now, as there's a new stock fw (41.3.A.2.107).
I have a few bugs to report. First, the fingerprint sensor is extremely slow, about half or even one third of the speed compared to stock. Second, could you guys please fix the deepsleep? That one is not working for now. And third, Night Light does not work at all...
Thank you for updating the XZ to Android 8.1 I am glad to see carbon rom on this device although it is not that stable for now.
Really nice ROM and I'm looking forward to make this my daily driver, I tried it for two days and these are the bugs I found:
1: GPU performance is really bad with 2d games and google maps lagging all the time when they never do on stock
2: CPU performance is inferior compared to stock, especially single threaded
3: enabling 120 hz display won't do anything and the settings or UI will crash when leaving the page
4: fingerprint seems to be sometimes less responsive, usable but can be improved
Camera is not so bad and the modded google camera works well, hopefully this will become the first proper AOSP based platform for this device that has only seen failures until now, keep up the good work.
Can I dirty flash this rom for just update?
I use Carbon Rom 3/31 version, but I can't use delta update because my device cannot receive the stock script.
I must change the rom script with Notepad+.
So...can I use dirty flash or....could you manage it?
Thanks for continously updating this rom and thank you for fixing the bug with the fingerprint sensor.
I'm not sure if deepsleep has been fixed but there is a big problem with playing music. I can't even play any music track at all...
Hello, looking forward to make this my daily driver, is it possible ?
What I would want is decent battery life and camera.
Hello. I tried to listen to music after installing the ROM, but the earphones are disconnected as soon as they are connected to the smartphone.
The earbuds pfe 132 and are made up of earphones with an iphone microphone.
L'ily said:
Clean flashed the 10th build along with Rytekk's dual-SIM patch, Pico Open GApps and Magisk 16.3 to my F8332 and other than that annoying SD notification (which can be banished to the notification drawer by making System UI notifications low priority) and Night Light not working, the only other major issue raised ITT of the CPUs not entering Deep Sleep is fixed according to Adiutor.
Great stuff. I haven't been able to standardise on one ROM since the CM days (interesting side note, it looks like you built the kernel for the NOCT build on my Z2 tablet).
I recommend this to anyone for daily use. Also, lower your expectations to realistic levels guise. I remember when XDA threads were for flagging major broken functionality, not complaining that a few amateur enthusiasts weren't putting out work that competed on every indicator against the finished product of a multibillion-dollar for-profit international conglomerate.
Sent from my Sony Xperia XZ using XDA Labs
Click to expand...
Click to collapse
Could you please give a link to that dual SIM patch?I have flashed this ROM on my F8332 successfully but none of my SIM cards works
Hello, with the 10th build I have a problem with the installation, it keeps telling me that Google services framework stopped.
Any help ?
(V11 vendor image odm, formated data)
BigMixman said:
Could you please give a link to that dual SIM patch?I have flashed this ROM on my F8332 successfully but none of my SIM cards works
Click to expand...
Click to collapse
Add these lines in build.prop, and reboot.
Code:
persist.multisim.config=dsds
persist.radio.multisim.config=dsds
ro.telephony.default_network=9,0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
FEATURES
A320FL/F/Y supported
Android 10
Arm64 with Treble support
3.18.140 kernel with f2fs support and many more
Enforcing build
VNDK-Full
crDroid features
KNOWN BUGS
Encryption is bugged (dont encrypt phone)
Other inherent bugs from AOSP, LineageOS or crDroid sources
CTS profile can fail in Magisk
Volte (it never will work)
INSTALLATION
Flash the repartition script if you haven't done
Wipe system, data (clean install recommended), vendor, dalvik&cache and cache
Flash rom zip
Flash GAPPS (they can fail at first flash, but flash again)
Reboot
DOWNLOAD
Lastest build: 20/00/2020
GoogleDrive folder
GAPPS
Arm64 gapps
ROOT
Flash Magisk as usual
SUPPORT
Telegram group
SOURCES
My github org
CREDITS
Me, for infinite hours spent with this project
Special thanks to @Valera1978 for bringing this to the exynos7870
@followmsi for the upstream kernel commits
@stricted and 7870 dev team for his work in exynos source code
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
crDroid 6.9, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Astrako
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Beta
Beta Release Date: 2019-12-19
Created 2019-12-19
Last Updated 2020-09-25
Reserved
Is signature spoofing enabled for microG support?
Astrako said:
Reserved
Click to expand...
Click to collapse
Good work, keep it up! ??
Nice job, this is the most stable "first release" I've ever seen!
This is the 2nd day I'm testing this ROM , it is very stable, WiFi, bluetooth, audio, camera.
Everything wotks fine. They only one issue I found a few minutes back its the sound. I was cresting a fullbackup with TWRP to my mSD, then when the phone started again a very very loud sound came from the speaker. It was a notificaction, I tried with músic an found that all kind of sound that cames from the speaker is ver y very lound and broke, even if I put the volumen at minimum.
I think this is a ver y good start for a first realease I really hope this issue gets fixed soon.
If there is a way I can help you to improve this ROM please let us kown. At least I can provide logs or something when this kind of issue happens.
Many thanks for you'r hard work @Astrako. This is one of the best ROM I have tried for this device,
IvannHylian said:
This is the 2nd day I'm testing this ROM , it is very stable, WiFi, bluetooth, audio, camera.
Everything wotks fine. They only one issue I found a few minutes back its the sound. I was cresting a fullbackup with TWRP to my mSD, then when the phone started again a very very loud sound came from the speaker. It was a notificaction, I tried with músic an found that all kind of sound that cames from the speaker is ver y very lound and broke, even if I put the volumen at minimum.
I think this is a ver y good start for a first realease I really hope this issue gets fixed soon.
If there is a way I can help you to improve this ROM please let us kown. At least I can provide logs or something when this kind of issue happens.
Many thanks for you'r hard work @Astrako. This is one of the best ROM I have tried for this device,
Click to expand...
Click to collapse
That is a hardware bug, you only need to shutdown device and will be fixed. It must be a some kind of static remaining in circuits and it happens even with stock. Only way to fix is that.
Very cool to see the phone still getting new roms. Before getting rid of my S9 Port, I was wondering, if the Android 10 iOS style gestures are supported? Since the phone has a home button, they might be disabled but I'd really prefer using gestures over the soft keys (back and recents).
Anyways, thank for the work!
Hello
I have been unable to make the rom work in my phone.
My phone model is A320FL.
The process I have followed to install the rom is the following one:
1. Install this stock A320FLXXS4CSG2_A320FLHUI4CSG1_HUI
2. Install root
3. Install twrp
4. Twrp -> Wipe -> Format data
5. Twrp -> Wipe -> Advanced wipe -> clean davlik, cache, data and system
6. Install rom and google apps open_gapps-arm64-10.0-nano-20191209-BETA.zip
The first time the google apps gave me an error indicating that the sdk version was incorrect; and when I tried to boot without installing it I wasn't able.
I have executed again the steps 5 and 6 and this time I was able to install google apps but the rom didn't boot, the phone only showed the crdroid animation.
This is the logcat of the booting of the rom the 2nd time: https://del.dog/tuzapuckuc
Regards
Looks interesting, can't wait to see if it gets to stable.
jontxo said:
Hello
I have been unable to make the rom work in my phone.
My phone model is A320FL.
The process I have followed to install the rom is the following one:
1. Install this stock A320FLXXS4CSG2_A320FLHUI4CSG1_HUI
2. Install root
3. Install twrp
4. Twrp -> Wipe -> Format data
5. Twrp -> Wipe -> Advanced wipe -> clean davlik, cache, data and system
6. Install rom and google apps open_gapps-arm64-10.0-nano-20191209-BETA.zip
The first time the google apps gave me an error indicating that the sdk version was incorrect; and when I tried to boot without installing it I wasn't able.
I have executed again the steps 5 and 6 and this time I was able to install google apps but the rom didn't boot, the phone only showed the crdroid animation.
This is the logcat of the booting of the rom the 2nd time: https://del.dog/tuzapuckuc
Regards
Click to expand...
Click to collapse
Did you install the repartition script?
Madhias said:
Did you install the repartition script?
Click to expand...
Click to collapse
Hello
Yes I installed the script just after installing TWRP. This is the complete sequence of the setup I did.
1. Install this stock A320FLXXS4CSG2_A320FLHUI4CSG1_HUI
2. Install root
3. Install twrp
4. Run the repartition script
5. Twrp -> Wipe -> Format data
6. Twrp -> Wipe -> Advanced wipe -> clean davlik, cache, data and system
7. Install rom and google apps open_gapps-arm64-10.0-nano-20191209-BETA.zip
The first time the google apps gave me an error indicating that the sdk version was incorrect; and when I tried to boot without installing it I wasn't able.
I have executed again the steps 5 and 6 and this time I was able to install google apps but the rom didn't boot, the phone only showed the crdroid animation.
Regards
jontxo said:
Regards
Click to expand...
Click to collapse
You have done two bad things:
1. Asking for support without having pushing "Thanks" button in first post of this thread. This is something very disrespectful, but I see that is a extremely bad and common behaviour in XDA.
2. You haven't format vendor partition. In the installation instructions in repartition script and this rom threads is written, but you haven't done, I guess because you haven't read the 5 steps of rom installation. Again a very bad and common behaviour in XDA.
Any chances of a a5 port? ?
People who can port the Galaxy S10 for our 3 2017? I want 10 but with Samsung chips
ysyp69 said:
People who can port the Galaxy S10 for our 3 2017? I want 10 but with Samsung chips
Click to expand...
Click to collapse
You can always learn how to do that! It's not that hard to learn new things!
Madhias said:
Did you install the repartition script?
Click to expand...
Click to collapse
Astrako said:
You have done two bad things:
1. Asking for support without having pushing "Thanks" button in first post of this thread. This is something very disrespectful, but I see that is a extremely bad and common behaviour in XDA.
2. You haven't format vendor partition. In the installation instructions in repartition script and this rom threads is written, but you haven't done, I guess because you haven't read the 5 steps of rom installation. Again a very bad and common behaviour in XDA.
Click to expand...
Click to collapse
Hello
Thanks for your help, I have managed to install the rom and everything work as expected.
The problem was that I wasn't restarting the phone after using the script to do the repartition. After that I have had also to not to install twrp before reboot.
Regards
deleted
Does this work with the A5 2017? I'm guessing not but this is the only ROM with Android 10, so I thought I'd ask if it supports it. If not, is it possible for this to be ported to the A5?
ImSmatMan said:
Does this work with the A5 2017? I'm guessing not but this is the only ROM with Android 10, so I thought I'd ask if it supports it. If not, is it possible for this to be ported to the A5?
Click to expand...
Click to collapse
It isn't for A5, posible to port? Well ask Dev!??