MAGISK THAT WORKS FOR YOUR DEVICE IS ONLY THIS ONE BECAUSE NORMAL MAGISK HAS BASEBAND PROBLEMS
Here are commits of the magisk hexpatch (for devs lel)
https://github.com/breakersvd/Magisk/commit/951db6c3249483ed6155a5d4375b7e4254d8276c
https://github.com/breakersvd/Magisk/commit/82e29516d29943094c10e643edbef9bae2bd634e
Download 16.73:
https://mega.nz/#!nJZzWY7R!aXjEWqzr_TeZQIz8QPsI6dAy9GuAd6tY8sjZ1-IkN30
Custom URL for unstable build from @ianmacd:
https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
Credits to breakersvd (from github) and @ianmacd for unstable builds
These builds are unofficial so dont submit any issues to official magisk github
..
Related
Main thread: OpenPDroid patches for CyanogenMod 11
WARNING: OpenPDroid is not compatible with ART for now. disable ART before flashing. enabling ART will cause the device to fail to boot. if you enabled ART and are unable to boot, flash official CyanogenMod temporarily to be able to fix (will cause privacy leaks). or if you have ADB access in android or recovery, you can disable ART by using setprop or editing a file.
these are mako builds of CyanogenMod 11 patched with OpenPDroid. find them here.
update: releases will now be distributed as overlays to the official CyanogenMod snapshots. first flash the official "M" snapshot corresponding to the OpenPDroid overlay you want to flash, then flash the overlay.
update: device-specific builds are being phased out in favor of the generic overlays. please refer to this post.
note: OpenPDroid does not affect the recovery nor the kernel, you can use whatever you want.
CM11-M6 broke OpenPDroid patches, so i forked OpenPDroid to restore compatibility, fix several bugs and clean up the code. sources are here.
XDA:DevDB Information
CM11-OpenPDroid-Mako, ROM for the Google Nexus 4
Contributors
Lanchon
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2014-08-19
Last Updated 2014-10-08
(reserved)
update: releases will now be distributed as overlays to the official CyanogenMod snapshots. first flash the official "M" snapshot corresponding to the OpenPDroid overlay you want to flash, then flash the overlay. full rom releases are unsupported as of now.
UPDATE: OpenPDroid support for CM11 M10 for all devices has been released!
PLEASE NOTE: device-specific builds are being phased out in favor of the generic overlays. please refer to this post.
enjoy!
UPDATE: OpenPDroid is now compatible with ART!
get the new generic overlays here. enjoy!
UPDATE: CM11 M11 OpenPDroid overlays for all devices released!
THREAD END NOTICE: no further notifications of updates will be posted to this thread.
please subscribe to the device-independent thread instead.
enjoy!
Stock and updated kernels for yureka | yureka+
Kernels are available in both enforcing and permissive SELinux mode. Works with all custom ROMs
Stock kernel version :3.10.49 ( No Wi-Fi reconnecting issue - Stable ).
Updated kernel version :3.10.108 ( Wi-Fi reconnecting issue noticed sometime ).
Enforcing SElinux status: Device is certified and Security is intact:good:
Permissive SELinux status: Device is not certified. Useful for installing mods..!
Status : Stable
Stock Nougat Kernel
https://www.androidfilehost.com/?w=files&flid=284362
Lineage 14.1 stock recovery
https://androidfilehost.com/?fid=11410932744536992184
Note:This recovery is only for lineage nougat roms 14.1 with minimum features like stock recovery. Those who wants to secure their data and password at recovery level can go for it. . This recovery is not used for flashing ROMs like TWRP . It is used only with lineage 14.1 ROMs to flash updates , factory reset etc..! Use at your own risk..!
Stock Oreo Kernel
https://www.androidfilehost.com/?fid=11410932744536986944
Install instruction
Reboot in recovery and flash the required kernel. clear cache and dalvik cache(optional)
uninstall instruction
Dirty flash your existing rom without wiping data:good:
Sources : Lineage
Android File Host Links (Contains all builds)
Other ROM projects
Lineage-16.0
Lineage-15.1
Lineage-15.1-VoLTE
Lineage-14.1-VoLTE-Kernel-3.10.49
Lineage-14.1-VoLTE-Kernel-3.10.107
Sound EnhancementsEqualizers
kindly use English language on comment section
Mirror it in afh
Rajendran Rasa said:
Mirror it in afh
Click to expand...
Click to collapse
will add soon:good:
Rajendran Rasa said:
Mirror it in afh
Click to expand...
Click to collapse
AFH links added:good:
[Update] Stock oreo kernel is out. All kernels [Nougat / Oreo] are purely stock version.Works with any custom ROMs..have fun:good:
Lineage recovery added
Lineage Recovery : https://androidfilehost.com/?fid=11410932744536992184
This recovery is only for lineage nougat roms 14.1 with minimum features like stock recovery. Those who wants to secure their data and password at recovery level can go for it. . This recovery is not used for flashing ROMs like TWRP . It is used only with lineage 14.1 ROMs to flash updates , factory reset etc..! Use at your own risk..!
[ROM][7.1.2][Stock kernel version] LineageOS 14.1 for Yureka | Yureka+
Link: https://forum.xda-developers.com/yureka/development/rom-lineageos-14-1-yureka-yureka-t3871565
ROM updates
https://forum.xda-developers.com/yureka/development/rom-lineage-15-1-yureka-yureka-t3874623
ABOUT THIS MODULE
This module enables the multi-user function of the Android phone, which was implemented in the Android version 4.2
REQUIREMENTS
Magisk 20.1+
SPECIAL THANKS
topjohnwu - Magisk
Seebz - By providing source code from the originating module so that I can do the opposite function of the original (github.com/seebz)
HOW TO INSTALL
Just go to my Github profile and go to my repository where this module's source code is located and download the latest release that is available and install using Magisk
LINKS
Github - Source code of the module (github.com/dxffety)
Don't work user not Foundet 404 Error pl fix Download link
CHANGELOGS:
v1.1
Support magisk v21+ (v22+ highly recommended)
v2.0
support op3 on mostly android R based rom
*support latest magisk v22.1
_______________________________________________
# READ CAREFULLY !!!
# Description
This module only disables HW button backlight on OnePlus 3/3T and does not do anything else.
# Note
Currently tested only on OnePlus 3T [AOSP, Lineage based roms R] *supposed to work on op3 too [at your own risk]
# Warnings
Flash at your own risk we are not responsible for any bricked devices !
# Requirements
- OnePlus 3T or [op3]*
- Android R based rom
- Magisk v21+ (v22+ highly recomended)
- Support Latest Magisk v22.1
# Installation
Flash only via Magisk Manager v21+ ..reboot and done.
# Uninstall
Uninstall or Remove via Magisk Manager Modules tab.
If something goes wrong.. just delete specific folder inside /data/adb/modules/ via TWRP file manager.
[*] Flash at your own risk we are not responsible for any bricked devices.
Credit:
topjohnwu #magisk
xda-developers community
**Please give feedback if it's work for you or not (which device, rom, magisk version..)
nice it works perfectly and persistently
> Project sakura v.5.R ROM > android 11 lineageos based rom
thanks buddy exactly what i needed!
#
Changelogs:
v.1.1
Support magisk v21+ (v22+ highly recomended)
v2.0
support op3 on mostly android R based rom
*support latest magisk v22.1
Works well on LineageOS 18.1 on OnePlus 3T with magisk 22.1.
If possible add this module in magisk repo
Yudh said:
Works well on LineageOS 18.1 on OnePlus 3T with magisk 22.1.
If possible add this module in magisk repo
Click to expand...
Click to collapse
Thanks for the feedback.. I don't think it's necessary..soon it will be implemented by any roms..
Kernel information
Spoiler: Features:
HID
WiFi injection
PostgreSQL
USB rndis
and other features for Kali Nethunter
Remove SafetyNet flags
Support WireGuard
Added Klapse
and more.
Spoiler: Bugs:
Testing..
Spoiler: Download:
GDrive
Version Information
For custom roms / Android 10
Linux Kernel version - 4.9.268
{xxx} Kernel version - 1.0
Created - 01.06.2021
Last update - 01.06.2021
Source code: {Mod edit: Link removed}
Clang:
GitHub - kdrag0n/proton-clang: Proton Clang toolchains builds in the form of a continuously updating Git repository. Clone with --depth=1.
Proton Clang toolchains builds in the form of a continuously updating Git repository. Clone with --depth=1. - GitHub - kdrag0n/proton-clang: Proton Clang toolchains builds in the form of a continuo...
github.com
Credits
Evolution-X for kernel source.
simonpunk for HID patches.
johanlike(DJY) for wifi patches.
osm0sis AnyKernel3.
Telegram chanel
Support group
I want to ask if I can refresh it on the custom ROM
baimuyunxi said:
I want to ask if I can refresh it on the custom ROM
Click to expand...
Click to collapse
Yes. Only custom rom. A10
I am on Lineage-18.1. to install the Nethunter rom, Do I need to downgrade to Lineage 17.1 (Android 10)? or some other Custom rom
kendallgreen said:
I am on Lineage-18.1. to install the Nethunter rom, Do I need to downgrade to Lineage 17.1 (Android 10)? or some other Custom rom
Click to expand...
Click to collapse
Аny custom rom, only A10
@ffd-ui THREAD CLOSED and most links removed!
In case of any question please check your conversations, and consult the moderators team (best via the report function) if you want the thread to be re-opened.
Stay safe and stay healthy!
Regards
Oswald Boelcke
Senior Moderator