Someone Local to me is selling a note 8. It's supposed to be unlocked. Will it work on Sprint or no?
powerstroke said:
Someone Local to me is selling a note 8. It's supposed to be unlocked. Will it work on Sprint or no?
Click to expand...
Click to collapse
Before I'd buy,I'd visit T-Mobile with the seller & phone in-hand,to ensure the phone is free & clear of any financial obligations.
Otherwise,you risk the possibility of it being blacklisted if any remaining balances are unpaid.
Not sure about compatibility,but,if the T-Mobile S8+ is any indication,it's only compatible with LTE,probably won't get voice/calls:
https://willmyphonework.net/
Regardless,with it being a new phone,you're in uncharted territory,no one can know for sure at this point,less a visit to Sprint & the mentioned visit to T-Mobile.
powerstroke said:
Someone Local to me is selling a note 8. It's supposed to be unlocked. Will it work on Sprint or no?
Click to expand...
Click to collapse
Unfortunately, probably not. Sprint is very strict with the phones it allows under it's BYOD program, it'll only allow activation of Sprint and Unlocked models. It knows when phones are carrier versions as Samsung provides Sprint with the IMEIs of the Sprint and Unlocked models.
Sprint is the only major carrier that still uses a database whitelist for phones that can be activated on their network. Bit of a **** policy, but there's not much you can do about it.
Source: Just tried the same thing with my T-Mobile S8+. Even when I flashed the unlocked firmware on it(something you'd need to do anyway to enable the CDMA radio on the Note8, T-Mobile firmware has it disabled), still wouldn't work. Found out it was because of Sprint's stupid policy.
Just wanted to chime in on this in the hopes that no one wastes their time and money trying to activate AT&T/T-Mobile branded Note 8's with Sprint.
Flashed my AT&T device with unlocked firmware to enable CDMA features (MEID HEX/DEC)
Bought a Sprint BYOD SIM
Gave Sprint technicians device information in an attempt to add it to their inventory (HEC/DEX)
They kept getting random incompatibility errors, kind of silly given all US Note 8's have identical hardware.
Case closed, looking for a Sprint or Samsung official unlocked device now..
Hey, so I'm about to buy this phone and would like to use the hotspot on my unlimited plan through AT&T. The LX3 version supports most of the major 4G bands that AT&T uses, so I know it will work where I live for sure. That being said, I know that most phones that are factory unlocked/unbranded do not have a provision check with the carrier for a tethering subscription. But I DO know that some unlocked/unbranded phones still perform a provision check with your carrier regardless, which nips your attempt to use the hotspot in the butt. So, my question is, does anyone know if the Mate 20 Lite performs this check? Has anyone with an unlimited plan through AT&T attempted to use their hotspot? I know I wouldn't need to worry about this if there were a root method for the phone, but it's currently still being investigated if it's even possible due to the bootloader being so locked down. Any help is greatly appreciated.
OS?
Or is this something that has possibly been implemented to Android OS through the latest security updates? As in, any newer unlocked/unbranded phone that has had Android OS loaded onto it, will perform the check regardless if it's factory unlocked? I've seen mixed reports of this on other forums, so it's hard to say for sure if this is an actual thing that has been implemented or not.
The Owner of this Thread has got the information he needed.
He wants to get the thread closed.
OP request. THREAD CLOSED
Does anybody know if the unlocked s10 will have access to Multi-line settings or has had experience with previous unlocked variants having access?
On T-Mobile this setting is specifically used for native "Digits" functionality without having to use an app. It's the only concern I have purchasing the unlocked variant.
I can't speak for the S10. The Note 9 however has built in Digits support in the TMobile variant, but requires downloading the app for the US unlocked variant. Chances are the S10 is also like this.
mosi76 said:
Does anybody know if the unlocked s10 will have access to Multi-line settings or has had experience with previous unlocked variants having access?
On T-Mobile this setting is specifically used for native "Digits" functionality without having to use an app. It's the only concern I have purchasing the unlocked variant.
Click to expand...
Click to collapse
So I had Unlocked S8 on T-Mobile and I believe S9 and S10 might have the same thing. Basically unlocked version only had: WiFi Calling, Band 12 and VoLTE and there was no Milti-Line setting, unless if you get T-Mobile branded phone. What I have done to my S8, is I flashed it with T-Mo firmware and got all the features without bloatware
This time I ordered S10e unlocked and upon getting it, will inspect and see which features unlocked model will offer and if need be, will flash to T-Mobile firmware
Charkatak said:
So I had Unlocked S8 on T-Mobile and I believe S9 and S10 might have the same thing. Basically unlocked version only had: WiFi Calling, Band 12 and VoLTE and there was no Milti-Line setting, unless if you get T-Mobile branded phone. What I have done to my S8, is I flashed it with T-Mo firmware and got all the features without bloatware
This time I ordered S10e unlocked and upon getting it, will inspect and see which features unlocked model will offer and if need be, will flash to T-Mobile firmware
Click to expand...
Click to collapse
When you say that you didn't have any TMobile bloatware when you flashed the TMobile firmware, are you referring to the general TMobile apps (like TMobile account app, VVM, etc)? or are you referring to some other 3rd party apps that TMobile puts on post-firmware. I always thought the TMobile apps would be there if flashing TMobile firmware, but I could be wrong.
Kjn246 said:
When you say that you didn't have any TMobile bloatware when you flashed the TMobile firmware, are you referring to the general TMobile apps (like TMobile account app, VVM, etc)? or are you referring to some other 3rd party apps that TMobile puts on post-firmware. I always thought the TMobile apps would be there if flashing TMobile firmware, but I could be wrong.
Click to expand...
Click to collapse
3rd party apps, for example "Lookout" antivirus app wasn't there and other that T-Mobile might put there. These apps need to be disabled and can't be uninstalled. I am fine with T-Mobile account app and VVM. When flashing, just need to flash main firmware files(4 of them) and the 5th one was userdata, which has all the unneeded stuff
When you do this, don't you void something that doesn't let you use samsung pay, etc?
Charkatak said:
So I had Unlocked S8 on T-Mobile and I believe S9 and S10 might have the same thing. Basically unlocked version only had: WiFi Calling, Band 12 and VoLTE and there was no Milti-Line setting, unless if you get T-Mobile branded phone. What I have done to my S8, is I flashed it with T-Mo firmware and got all the features without bloatware
This time I ordered S10e unlocked and upon getting it, will inspect and see which features unlocked model will offer and if need be, will flash to T-Mobile firmware
Click to expand...
Click to collapse
gotnoypi said:
When you do this, don't you void something that doesn't let you use samsung pay, etc?
Click to expand...
Click to collapse
No, because I flashed my phone with an official Samsung firmware
Should have known so I could have purchased the unlocked version. Thanks for the info.
Charkatak said:
No, because I flashed my phone with an official Samsung firmware
Click to expand...
Click to collapse
gotnoypi said:
Should have known so I could have purchased the unlocked version. Thanks for the info.
Click to expand...
Click to collapse
Not a big deal as there were times when T-Mobile for example would release monthly security patches couple of weeks earlier and possibly the Android upgrade version early too(not always though). As I understand that Samsung is obligated to release an update for carrier branded phones and then can released for their unlocked units. If you would want to flash your phone down the road, you could. It is just the process may not be as straight forward as flashing unlocked model
Ok one thing I learned today as I was setting up my s10+. The Multi-line feature is still not activated in S10+ (most likely in other s10 variant as well). I spoke with Tmobile Digits team and it was just confirm to them yesterday that S10 doesn't support multi-line yet. The only way to use DIGITS is trough the digits app. It's definitely a bummer.
I was also told that the same situation applies to the previous phones during launch (S9 or Note9) where it wasn't initially activated. It was delivered through a software upgrade afterwards. So I'm hoping this software update arrives sooner than later.
Hope this helps other member's using DIGITS.
gotnoypi said:
Ok one thing I learned today as I was setting up my s10+. The Multi-line feature is still not activated in S10+ (most likely in other s10 variant as well). I spoke with Tmobile Digits team and it was just confirm to them yesterday that S10 doesn't support multi-line yet. The only way to use DIGITS is trough the digits app. It's definitely a bummer.
I was also told that the same situation applies to the previous phones during launch (S9 or Note9) where it wasn't initially activated. It was delivered through a software upgrade afterwards. So I'm hoping this software update arrives sooner than later.
Hope this helps other member's using DIGITS.
Click to expand...
Click to collapse
Luckily you got to speak to someone who actually knows or at least should know. I have messaged them through the app and through Twitter and got the same basic kinda answer but no specifics and that's if they even knew what I was talking about. Hopefully it happens soon. Thanks for the update
mosi76 said:
Luckily you got to speak to someone who actually knows or at least should know. I have messaged them through the app and through Twitter and got the same basic kinda answer but no specifics and that's if they even knew what I was talking about. Hopefully it happens soon. Thanks for the update
Click to expand...
Click to collapse
I took multiple tries on chat and call. Luckily I got forwarded to DIGITS team and the person knows exactly the issue and is not reading off knowledge base or written instructions.
Hopefully it arrives soon as I don't want to use the DIGITS app for it.
T-Mobile DIGITS team has actually been telling customers that the native multiline feature will not be coming to the S10 or supported on other devices anymore because they destaffed that dev team. They are phasing out the feature. Absolutely horrible decision. The DIGITS app is hot trash. They have a **** load of customer pissed about it. Especially in the business segment like me. There's a scathing thread over on the T-Mobile's forums about it.
So, now T-Mobile DIGITS experts are telling people that they are waiting on an update from Samsung to make the feature possible again.
So, I don't what the **** is going on. It's ****ery.
Unless we hear something directly from Samsung, everything is now just hear say. I'm still hoping for a software update to push out the feature.
Actually, the multi-line setting was garbage. Even on my previous Note 8 and current unlocked Huawei P20 Pro, I use the DIGITS app. Luckily, with previous T-Mobile lines, got DIGITS for free. For new customers and new lines, I think it costs some monthly fees.
Thank you!
gotnoypi said:
Ok one thing I learned today as I was setting up my s10+. The Multi-line feature is still not activated in S10+ (most likely in other s10 variant as well). I spoke with Tmobile Digits team and it was just confirm to them yesterday that S10 doesn't support multi-line yet. The only way to use DIGITS is trough the digits app. It's definitely a bummer.
I was also told that the same situation applies to the previous phones during launch (S9 or Note9) where it wasn't initially activated. It was delivered through a software upgrade afterwards. So I'm hoping this software update arrives sooner than later.
Hope this helps other member's using DIGITS.
Click to expand...
Click to collapse
Hey, thank you so much for posting this. I tried to contact thru customer support, Twitter, calls, walk-ins.. Seems like T-Mobile employees aren't aware not only of this issue, but of the option at all..
don't mean to resurrect this old thread, but i got my S10 a few days ago and just got off the phone with the DIGITS support, after being transferred numerous times by people that didn't know what i was even talking about. the guy said that samsung told them (tmobile) a few months ago that they are removing multi-line settings from all new devices and that users need to start using the DIGITS app instead. he even said that with any further updates on the phones that currently have multi-line settings, the updates will actually remove those settings from the phones. pretty crappy if you ask me.
I'm still using a Samsung S7 with multi-line set to On, with T-Mobile. I didn't like their Digits app, much prefer the phone's native multi-line ability. However, as others above have said, T-Moble Digits support told me that Samsung was going to remove that ability. For now, it still works albeit buggy. I have to turn the phone off then on multiple times a day to keep the second line working properly. Does anyone know another Android phone that supports multi-line with T-Mobile, but correctly?
I just got a Note 9 on Amazon, I realize a small risk associated with that. The phone was sold as a factory unlocked device. I received it today and I checked it in the settings and the device is confirmed as a SM-N960U1 which is what it should be. However, when I go to register the phone on Samsung's website, I enter the IMEI and it registered as a SM-N960UZKASPR which is an unlocked sprint variant. I am using this phone on AT&T at the moment, but will be transferring to T-Mobile very soon. Am I going to have issues with this as far as bands and networks are concerned, or anything else? I know I am screwed when it comes to wifi calling and volte.
playerone_ said:
I just got a Note 9 on Amazon, I realize a small risk associated with that. The phone was sold as a factory unlocked device. I received it today and I checked it in the settings and the device is confirmed as a SM-N960U1 which is what it should be. However, when I go to register the phone on Samsung's website, I enter the IMEI and it registered as a SM-N960UZKASPR which is an unlocked sprint variant. I am using this phone on AT&T at the moment, but will be transferring to T-Mobile very soon. Am I going to have issues with this as far as bands and networks are concerned, or anything else? I know I am screwed when it comes to wifi calling and volte.
Click to expand...
Click to collapse
What I assume happened is that the phone was a sprint model but was unlocked. The previous owner installed the U1 firmware which is the unlocked and unbranded firmware.
All US models are built with the same hardware, radios etc. Compatible with all networks.
You will be able to use it on Tmobile no problem.
You are not screwed if you want tmobile features
If you want tmobile related features wifi calling and the like, you will need to flash the tmobile firmware.