my question is... how i can install new system with locked bootloader when i have access only to a fastboot, please help me.
werindam said:
my question is... how i can install new system with locked bootloader when i have access only to a fastboot, please help me.
Click to expand...
Click to collapse
How do you expect anybody can help you if you don't provide practically no info at all (not even were you running MM, N, O, stock or custom ROM)
- what was the last build you were running (full stock build name, inclvariant, cust, number)
- were xou running custom ROM and which one
- stock recovery or TWRP (which)
- shortly what were you doing when you bricked the phone
Also, do you have bootliader unlock code, and is FRP locked or not (you can see in fastboot).
zgfg said:
How do you expect anybody can help you if you don't provide practically no info at all (not even were you running MM, N, O, stock or custom ROM)
- what was the last build you were running (full stock build name, inclvariant, cust, number)
- were xou running custom ROM and which one
- stock recovery or TWRP (which)
- shortly what were you doing when you bricked the phone
Also, do you have bootliader unlock code, and is FRP locked or not (you can see in fastboot).
Click to expand...
Click to collapse
I dont know last build name - it was stock firmware and recovery
I just factory reset and then phone showing up that i must to enter last google account used in this phone. Thats my mom phone and she has no idea of any information about google acc and she only told me that someone who she bought from this phone maked account ahh.. Sorry for my english
And no, i dont have bootloader unlock code because i dont know how to get it.. and frp is locked
werindam said:
I dont know last build name - it was stock firmware and recovery
I just factory reset and then phone showing up that i must to enter last google account used in this phone. Thats my mom phone and she has no idea of any information about google acc and she only told me that someone who she bought from this phone maked account ahh.. Sorry for my english
And no, i dont have bootloader unlock code because i dont know how to get it.. and frp is locked
Click to expand...
Click to collapse
Do you know how many 'stock ROM and recovery' versions exist, and each may need different procedure to restore your phone
If it is P9 (single SIM, hence L09) -not Dual SIM (L19 or AL10) or Lite or Plus - it can be cust c432, c185 c900, etc, with Android 6 (builds 1xx, 2xx) or Android 7 (builds 3xx, 5xx) - all are stock firmwares
Are you familiar with Fastboot, or maybe the safest way will be to go to service (specially if still under guarantee)
zgfg said:
Do you know how many 'stock ROM and recovery' versions exist, and each may need different procedure to restore your phone
If it is P9 (single SIM, hence L09) -not Dual SIM (L19 or AL10) or Lite or Plus - it can be cust c432, c185 c900, etc, with Android 6 (builds 1xx, 2xx) or Android 7 (builds 3xx, 5xx) - all are stock firmwares
Are you familiar with Fastboot, or maybe the safest way will be to go to service (specially if still under guarantee)
Click to expand...
Click to collapse
yea i know, and if its way to restore somehow this p9 i will can do that via fastboot, just dont know how
Its p9 single sim l09. i think it was c432 rom
Since you didn't unlock Bootloader it must not be scr***ed up severely.
Try the following (independent of your prev build, no need for Fastboot, open Bootloader and other hacking tricks):
- Power off
- Connect by USB cable to the charger
- Must be in the range of reliable WiFi
- Press Vol+ & Pow (in that order) and keep pressing
It shall boot to eRecovery, giving you options to download and reinstall your whole stock firmware
Advice: When you restore, take and save screenshots from About, to know your build, IMEIs, etc
Ive got error : Getting package info failed
you need sd card. in sd card create "dload" folder, in folder copy this update.app link here oh, first link are for eva-l19 here are for eva-l09
then, insert sd card in phone, press and hold vol+ and vol - and power button (hold all buttons till see update things)
after that, download this (or download all at once) link here and delete update.app in dload folder at sd card, and copy all from this b136 download, need to be 2x folder and update.app now larger file than first. and do dload method once more (vol+, vol- and power till update starts)
ah, but you need to charge pgone atlest to 50% to be succes with dload method!
Arnys said:
you need sd card. in sd card create "dload" folder, in folder copy this update.app link here
then, insert sd card in phone, press and hold vol+ and vol - and power button (hold all buttons till see update things)
after that, download this (or download all at once) link here and delete update.app in dload folder at sd card, and copy all from this b136 download, need to be 2x folder and update.app now larger file than first. and do dload method once more (vol+, vol- and power till update starts)
ah, but you need to charge pgone atlest to 50% to be succes with dload method!
Click to expand...
Click to collapse
ok, ill try this
werindam said:
ok, ill try this
Click to expand...
Click to collapse
i edited my writes, first link are wrong, use second for eva-l09
Error: Software install failed.. ;/
battery charged? in eRecovery can see, or turn off phone and put to charger, need to be 50% (some other says need to be 70%)
Hello, i have a similar issue, but i can't boot. My phone bootloop every single time. I can't boot to recovery but i can boot in fastboot. i was in c432b382 and i tried to flash a c432b378 update to have android N
Hi
I installed openkirin RR OS B2 on my P9. I want to back to stock FW. P9 is Rebranded to AL10. Thanks for help.
Makoj said:
Hi
I installed openkirin RR OS B2 on my P9. I want to back to stock FW. P9 is Rebranded to AL10. Thanks for help.
Click to expand...
Click to collapse
Look into the corresponding threads, OpenKirin and Rebranding (Oreo)
Related
Hello,
This is my first thread here, so when it's not in the right section please let me know.
My huawei ascend p7 is stuck in fastboot&rescue mode.
Before my screen was stuck so i didn't had image on display.
I tried to fix it with the buttons but that didn't work (don't know which combinations i tried exactly)
After putting back my connector, the screen worked.
Now i am stuck in de fastboot mode.
Can someone help me to get out?
Hi, here is what I can told you, but be sur you have no other way, I always take the easiest way, and the way I know to solve a problem, so maybe u can have smthg easier.
Infos:
Power & VOL+ = Recovery
Power & VOL+ & VOL- = Force update (only via stock recovery & dload folder)
Wired to PC, Power & VOL- = Fastboot (the screen you got)
Needed:
Unlocked BL
ROM B121 or B609 (depending on what you had before it ran out, and maybe it can work with any full rom in update.app)
Huawei Update Extractor
Extract the correspondant rom, extract all
Then when your phone is connected you write for each unpacked file:
fastboot flash xx xx.img
Like: fastboot flash boot boot.img
fastboot flash recovery recovery.img
etc... ( will give you the batch i made for this)
After this you have a stable fonctionnal etc rom this installation is wrong. So now:
Install TWRP 2.8.1.0, Install MyRom 1.2 or 3.3 (depending on your initial B1xx or B6xx)
Then:
Create on SDcard a folder called "dload" (without quotes) put the Bxxx that you extracted the files from into "dload"
Reboot in fastboot
Flash the stock recovery
Force update (3 buttons)
Then you should be able to get your phone back
Fully agree with @Kicroy,
but you can do a little easier, just do only the second part.
So, if you were on a B1xx rom flash TWRP 2.8.1.0 and MyRom 1.2; If you were on B6xx flash TWRP 2.8.7.0. and MyRom 3.3.
After that you have to extract the recovery of the rom (B1xx/B6xx) you had been using. Now flash this recovery through adb like he described and go on with dload etc.
Updated, now no sim
I figured out the update and it's beeing updated now till B815 from "huaweiblog".
But now i have a different problem.
My sim is not recognized anymore
Someone can help me?
I'd recommend to flash B800, then downgrade to B621, update afterwards to B623 -> B830. This way you will get to the official lollipop rom.
Did you remove your sim, blowed a little bit in the sim tray and put it back? If that doesn't help try the sim in another phone (eventually do a factory reset)
l3Nni said:
I'd recommend to flash B800, then downgrade to B621, update afterwards to B623 -> B830. This way you will get to the official lollipop rom.
Did you remove your sim, blowed a little bit in the sim tray and put it back? If that doesn't help try the sim in another phone (eventually do a factory reset)
Click to expand...
Click to collapse
Can you give me links where i can find the roms you suggested?
I can't find them.
I removed the sim an blowed in the sim tray, not working.
The sim is oke, it's working in another phone.
B800 http://download-c.huawei.com/download/downloadCenter?downloadId=48763&version=113125&siteCode=it
B621 http://download-c.huawei.com/download/downloadCenter?downloadId=48964&version=113966&siteCode=it
B623 https://drive.google.com/file/d/0B_vgYwoT2KBeQ3lTRTM1NkY3WFk/view?pli=1
B830 https://mega.nz/#!Lp0QFBhT!8tEKtwm8e8WyYd00jeIM0OBgikCIm9ezIPFF1vgmvWU
I did the downgrade to B609.
Sim is not working all the time.
I think my phone is stuck :crying:
Assumable yes, looks like an hardware defect.. So, contact your dealer if you have still warranty.
Thanks for all the reply's.
My phone is out of warranty and stuck
Going to get another one.
Ahh, thats annoying then.
You may think about a reparation by yourself, it's not as complicated as you may think. Even if you let a shop do this it might be worth it..
Maybe your phone lost the IMEI code along the process and that's the cause of the SIM failure.
Dial *#06# on your P7, and if shows all zeros, you have this issue.
Hello guys!
I have bricked my P9 EVA-L09 today. i want to update it to android 7 with update from erecovery. i put files from update_data_full_hw_eu.zip and it went good but phone wont boot up and the second file "update.zip" ive extracted to dload but phone cant install it. I've tried many things to unbrick my phone but i cant do it. flashing system via fastboot is impossible cause it says that it cant be written. i have no root ant no bootloader unlocked. Please help me guys QQ
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
marjaN_ said:
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
Click to expand...
Click to collapse
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Nobody can help me? :crying::crying::crying:
power off, then press the Power + voulume +, wipe data+cache
ziemiak said:
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Click to expand...
Click to collapse
try installing 6.0 firmware for you model.
i cant go to eRecovery, i cant even shut down device - only full discharge can make it.But i can go to fastboot. Ive tried with fastboot commands but i have locked bootloader and every time my flashes are rejected by phone. The simpliest metod - HiSuite send me message: "no recovery packages are found for your phone model". It should be a way to unbrick it with fastboot but i dont know how.
Hi I was in your shoes yesterday I had to pay for the dn Phoenix to fix my phone it uses a backdoor to install firmware from fastboot
You could try and look for the backdoor commands I found this , I would post a link but can't yet
fastboot oem backdoor info
FB LockState: LOCKED
USER LockState: LOCKED
fastboot oem backdoor get
FBLOCK**obfuscated**
fastboot oem backdoor end
remote: fastboot stat not match
fastboot oem get-bootinfo
locked
fastboot oem check-rootinfo
old_stat: SAFE
now_stat: SAFE
change_time: 0000000000
fastboot oem check-image
secure image verify success
fastboot oem relock
remote: stat not match
fastboot oem backdoor set
remote: data parse fail
fastboot oem frp-erase
Haven't tried, but should remove the Factory Reset Protection (FRP)
fastboot oem emmc_diag
cid info:
mid 17,oid 256,pnm 064G70,prv 0.0,psn 0x18b66278,
csd dump:
D02700320F5903FFFFFFFFEF864000AB00
ext_csd dump:
...
FMW FAIL! WRITE PROTECT!
fastboot oem emmc-dump
unknown status code
fastboot oem get_key_version
huawei_key_v1
fastboot oem battery_present_check
3984mv
fastboot oem get_hwnff_ver
Ver2.3
fastboot oem get-psid
SN:**YourIMEI**
fastboot oem get-build-number
V100R001C00B000
fastboot oem get-product-model
HUAWEI M2-A01W
I will try to send my Huawei to warranty service and if they wont repair my phone ill pay for DC Phoenix too
I had the same problem!
Hi there.
Was in the same situation as you not so long ago.
Get a micro SD card, plug into PC, create a dload folder then download the rollback file from the Huawei website.
I'm a new user so can't post URL. Just Google "Huawei P9 rollback" should be the 2nd option (consumer.huawei link)
Put in the dload folder and put into your P9.
Press and hold power, vol up and down together till the Huawei logo appears and let go when you feel the vibrate.
This should force update and restart. (does not rollback to email 4.1, only unlocks the rollback from emui 5)
Next you need to download your previous firmware, in my case I'm in the UK with unlocked P9, so I downloaded EVA-L09C432B166.
Same again, put micro SD into PC, delete the rollback file and put your firmware in its place.
Put back in the P9 and repeat the above force update.
This will put you back to working stable stock.
For further reassurance, download a build previous to B166 so when it's up and running you can search for an OTA update to make sure all is in order.
Hope this helps.
Did you meant that the rollback flashes without going to eRecovery? I said some posts earlier that i cannot enter eRecovery so i cant dload anything. Im stuck on Huawei logo all the time do you think than i can flash something via dload without going to eRecovery?
erecovery is different.
I'm saying to do a force update, but in order to do so you need a microSD card.
Erecovery involves holding power up while connecting to PC in order to use HiSuite etc to recover.
Force updater tells the phone to search for dload folder on SD card or phone and install the update before trying to boot up OS.
So, if you connect microSD to your PC via a card reader etc and not via your phone, you can create a dload folder, download the rollback file from Huawei (above) the file is only around 80mb or so, plug the SD card back into your phone while powered off, hold down Power + vol up + vol down. The Huawei logo will appear, when it disappears let go of all the buttons. This should bring up the Update screen.
At this point the phone will install the rollback file. and this will bypass the rollback prevention in emui 5 and therefore allow you to install a previous emui build (4.1)
Again though your phone will still not boot at this point as there is no OS working or installed.
So you need to download the corresponding firmware for your phone/country/operator. Once downloaded, remove the memory card from the phone, connect to PC via card reader, delete the rollback file you placed in the dload folder and replace it with the downloaded OS and repeat the process used to install the rollback.
From there you should be back to stock marshmallow.
I should point out the files you download may be in zip folders. You need to extract the "update" file and that's what you place in the dload folder.
Hope this all makes sense, if not I can make a YouTube video and post it.
Good luck.
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
http://www.android-hilfe.de/thema/downgrade-von-b360-zurueck-auf-b182.813366/
You must first make a step.
Only http://download-c.huawei.com/download/downloadCenter?downloadId=92743&version=363740&siteCode=de
Then
http://download-c.huawei.com/download/downloadCenter?downloadId=91783&version=358257&siteCode=de
're After You on MM and then can do what you want.
In the first link is a guide.
I did the same thing is what you doing today I've tried this and it fixed my phone
ziemiak said:
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
Click to expand...
Click to collapse
The rollback package for L09 model is here: http://download-c.huawei.com/download/downloadCenter?downloadId=91892&version=363759&siteCode=es
Inform the results please.
I made a video to better understand. This wideo is showing that phone isn't searching any dload folder. https://youtu.be/oD9AI_6SqLs
edit: i have tried your advices to put rollback and try to dload it and then same with firmware but there is no reaction i didnt see there any circle with progress of flashing (like it was before i flashed rollback for L19)
Mine is now doing the exact same thing - I too tried the dload method to update from C432B182 to C432B361 and it's screwed my device up too.
Until I tried to use the 'rollback' package, it would at least allow me to power off, so I could get back into the Update screen - after doing that, and trying the B182 again, it's got into this position where I can do literally nothing with it. No combination of buttons, no matter how long I try to hold them, seems to do anything.
An update...
After letting my battery drain completely, I have been able to get into Fastboot mode, by pressing and holding the Volume Down button whilst connecting a USB cable to my PC.
From here, I have been able to run DC-Phoenix, and have been able to write some .APP files to it - which has at the very least got it booting into eRecovery, rather than the boot loop it had before, but is still not fully booting.
It looks like I might need the full, original firmware, in order to proceed?
And I've got about 68 hours left to flash using DC-Phoenix, or I'll have to spend another €15!
Yes you download the original firmware unzip it and put it in the "dload" folder of SD card then do a force update. Hold all the buttons vol + vol - and power
Hey guys,
This is a bit of a long one so please bear with me...
I have an EU EVA-L09 which was running EVA-L09C432B166 unrooted and with a locked bootloader. I decided to unlock it which I did successfully (Fastboot was showing both Phone & FRP as unlocked) and flashed TWRP on to it as well as BETA-SuperSU-v2.65.
After a few days with my stock email app not working and Battery Settings unaccessable since rooting (not to mention the warning message every time I booted my phone) I decided it wasn't worth it and wanted to remove it all and go back to stock. I was struggling to find a stock rom due to being impatient and just removed root via SuperSU app on my phone.
I found a stock recovery image which I tried to flash on to the phone using the BAT file (PASO 3 VOLVER A RECOVERY STOCK) which didn't seem to work. I also tried to do it via cmd line and was faced with "FAILED (remote: Command not allowed)." I also noticed that FRP was showing as locked now in fastboot. I did unlock it using DC Unlocker but it's still displaying as locked (after some research on the forum this seems normal.)
I tried to update to Nougat 7.0 by Wiping in TWRP and then installing Update.zip from another thread on this forum. This worked great but stupidly I forgot to install the EU pack zip which accompanied it before rebooting. Unfortunately this has now installed a limited version of Nougat on to the phone whilst simultaneously removing TWRP so I can't install the other zip.
I have tried to install the other zip and some old firmware using dload method but I always get stuck on 5%. I have also tried flashing TWRP again but I am facing the same , ""FAILED (remote: Command not allowed)" error. The error is also displayed when I try to re-lock the bootloader. The bootloader is definitely unlocked as I have checked with cmd line & the warning message is still being displayed on booting up. I have USB debugging enabled but am unable to enable OEM Unlock due to the option being greyed out (seems to be the case when FRP is unlocked.)
I can't do any updates using 3 button technique they all get stuck on 5%. I can't submit any flash commands in cmd.exe without getting the "command not allowed error."
There is a bit of hope because I can boot in to Nougat but it's very limited with no apps and no keyboard.
Can anybody help?
DCStreamer said:
Hey guys,
This is a bit of a long one so please bear with me...
I have an EU EVA-L09 which was running EVA-L09C432B166 unrooted and with a locked bootloader. I decided to unlock it which I did successfully (Fastboot was showing both Phone & FRP as unlocked) and flashed TWRP on to it as well as BETA-SuperSU-v2.65.
After a few days with my stock email app not working and Battery Settings unaccessable since rooting (not to mention the warning message every time I booted my phone) I decided it wasn't worth it and wanted to remove it all and go back to stock. I was struggling to find a stock rom due to being impatient and just removed root via SuperSU app on my phone.
I found a stock recovery image which I tried to flash on to the phone using the BAT file (PASO 3 VOLVER A RECOVERY STOCK) which didn't seem to work. I also tried to do it via cmd line and was faced with "FAILED (remote: Command not allowed)." I also noticed that FRP was showing as locked now in fastboot. I did unlock it using DC Unlocker but it's still displaying as locked (after some research on the forum this seems normal.)
I tried to update to Nougat 7.0 by Wiping in TWRP and then installing Update.zip from another thread on this forum. This worked great but stupidly I forgot to install the EU pack zip which accompanied it before rebooting. Unfortunately this has now installed a limited version of Nougat on to the phone whilst simultaneously removing TWRP so I can't install the other zip.
I have tried to install the other zip and some old firmware using dload method but I always get stuck on 5%. I have also tried flashing TWRP again but I am facing the same , ""FAILED (remote: Command not allowed)" error. The error is also displayed when I try to re-lock the bootloader. The bootloader is definitely unlocked as I have checked with cmd line & the warning message is still being displayed on booting up. I have USB debugging enabled but am unable to enable OEM Unlock due to the option being greyed out (seems to be the case when FRP is unlocked.)
I can't do any updates using 3 button technique they all get stuck on 5%. I can't submit any flash commands in cmd.exe without getting the "command not allowed error."
There is a bit of hope because I can boot in to Nougat but it's very limited with no apps and no keyboard.
Can anybody help?
Click to expand...
Click to collapse
Yes... Downgrade to MM with the rollback
Then flash full B136 and update
Enviado desde mi EVA-L09 mediante Tapatalk
jcalderonv74 said:
Yes... Downgrade to MM with the rollback
Then flash full B136 and update
Enviado desde mi EVA-L09 mediante Tapatalk
Click to expand...
Click to collapse
Hey @jcalderonv74 thank you for the response. I have just re-tried to do that on your suggestion and with the intermediate UPDATE.app in the dload folder on my external SD I get to the stage of the 3 button start up as per the instructions and Installing Update gets stuck on 5%.
I have noticed I do have access to stock recovery using "adb reboot recovery" command.
Any more ideas?
DCStreamer said:
Hey @jcalderonv74 thank you for the response. I have just re-tried to do that on your suggestion and with the intermediate UPDATE.app in the dload folder on my external SD I get to the stage of the 3 button start up as per the instructions and Installing Update gets stuck on 5%.
I have noticed I do have access to stock recovery using "adb reboot recovery" command.
Any more ideas?
Click to expand...
Click to collapse
Your really used the rollback package?
http://consumer.huawei.com/ch/support/products/downloads/detail/p9-chde.htm?id=92743
Have you full battery?
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
xtcislove said:
Your really used the rollback package?
Click to expand...
Click to collapse
Hi, yeah I did use the rollback package @xtcislove and it would just get stuck on 5% using the dload method, and trying to flash it in command line would result in "Command not allowed".
darrr1 said:
Have you full battery?
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
@darrr1 yes the battery was full but still it wouldn't work
Ok just for completion and anybody who is having the same issues as I have had with the same or similar model of P9, this is how I solved it (after a day without sleep and a couple of migraines). Please note this is only to be used if you have exhausted all other, free options on this forum as this is slightly risky and costs money. It's a last resort.
What you'll need:
- HiSuite installed but closed on your PC
- USB cable to connect phone to PC
- DC-Phoenix with an account with 15 credits (15 Euro)
- The DC-Phoenix guide opened at "Method 2"
- Firmware .img file from their database by clicking "Enter Support Area" button in DC-Phoenix (EVA-AL10_M00A056_Factory_firmware_Global_Nonspecific_Android_6.0_EMUI_4.1.dgtks)
- Stock firmware as an .app file on an SDCard in a folder named "dload" (I used EVA-L09C432B182 (UPDATE.APP))
Method:
1. Copy the official stock firmware .app file to your SDCard inside a folder named "dload".
2. Remove SDCard & Sim Card from the phone.
3. Put your phone in to Fastboot (Turn off phone, hold volume(down), insert usb cable).
4. Load DC-Phoenix and select Fastboot mode.
5. Click "IMG Files" tab and locate the .dgtks file using the "Config or recovery file:" field.
6. DO NOT uncheck the boxes next to "Not erase NV" and "Not erase oeminfo" as this will delete your IMEI and other information completely.
7. Click UPDATE and wait for it to fully finish (you may see an error regarding FBlocks but it should still go on to complete).
8. Once you see it is completed, disconnect phone from PC and restart the phone by holding the power button.
9. This should load you in to a very basic firmware (it may take one or two reboots to achieve this).
10. Insert your SDCard with the newer, official, stock firmware that you want on the phone in to the SDCard slot WITHOUT SimCard.
11. On your phone home you should see an icon named "Upgrade" or "Upgrade/Update Phone" on the first page. (I've forgotten the exact name of the icon but it will be obvious to you).
12. Click that icon and it should go ahead and install the firmware .app on to the phone off your SDCard.
After following the on screen instructions you should now be back to stock firmware. I recommend re-locking your bootloader now using fastboot and your unlock key if you are trying to do so. If you go on to update to Nougat 7.0 before locking your bootloader back up you won't be able to do so without downgrading back to the same firmware that was on your phone when you originally unlocked it.)
Hope this helps somebody who is stuck and exhausted every other avenue with nothing left to lose.
Danny
I had a similar issue after doing this :- unlock bootloader...root MM....Upgrade to Nougat...root...Rollback to MM...root...Upgrade to Nougat.. borked!!!
I was left with a phone that only booted to bootloader and no recovery or possibility of flashing with dload worked.
Luckily DC Phoenix got it into a usable state where i could enter erecovery and flash Nougat again. Seems the backdoor method they use to load the OS, at least at a low level, is very effective!
There's probably a lesson here, but I've never had a phone so easily bricked....
Thanks :good:
Peace
---------- Post added at 07:57 AM ---------- Previous post was at 07:53 AM ----------
DCStreamer said:
Please note this is only to be used if you have exhausted all other, free options on this forum as this is slightly risky and costs money. It's a last resort.
Click to expand...
Click to collapse
:good::good:
DCStreamer said:
Ok just for completion and anybody who is having the same issues as I have had with the same or similar model of P9, this is how I solved it (after a day without sleep and a couple of migraines). Please note this is only to be used if you have exhausted all other, free options on this forum as this is slightly risky and costs money. It's a last resort.
What you'll need:
- HiSuite installed but closed on your PC
- USB cable to connect phone to PC
- DC-Phoenix with an account with 15 credits (15 Euro)
- The DC-Phoenix guide opened at "Method 2"
- Firmware .img file from their database by clicking "Enter Support Area" button in DC-Phoenix (EVA-AL10_M00A056_Factory_firmware_Global_Nonspecific_Android_6.0_EMUI_4.1.dgtks)
- Stock firmware as an .app file on an SDCard in a folder named "dload" (I used EVA-L09C432B182 (UPDATE.APP))
Method:
1. Copy the official stock firmware .app file to your SDCard inside a folder named "dload".
2. Remove SDCard & Sim Card from the phone.
3. Put your phone in to Fastboot (Turn off phone, hold volume(down), insert usb cable).
4. Load DC-Phoenix and select Fastboot mode.
5. Click "IMG Files" tab and locate the .dgtks file using the "Config or recovery file:" field.
6. DO NOT uncheck the boxes next to "Not erase NV" and "Not erase oeminfo" as this will delete your IMEI and other information completely.
7. Click UPDATE and wait for it to fully finish (you may see an error regarding FBlocks but it should still go on to complete).
8. Once you see it is completed, disconnect phone from PC and restart the phone by holding the power button.
9. This should load you in to a very basic firmware (it may take one or two reboots to achieve this).
10. Insert your SDCard with the newer, official, stock firmware that you want on the phone in to the SDCard slot WITHOUT SimCard.
11. On your phone home you should see an icon named "Upgrade" or "Upgrade/Update Phone" on the first page. (I've forgotten the exact name of the icon but it will be obvious to you).
12. Click that icon and it should go ahead and install the firmware .app on to the phone off your SDCard.
After following the on screen instructions you should now be back to stock firmware. I recommend re-locking your bootloader now using fastboot and your unlock key if you are trying to do so. If you go on to update to Nougat 7.0 before locking your bootloader back up you won't be able to do so without downgrading back to the same firmware that was on your phone when you originally unlocked it.)
Hope this helps somebody who is stuck and exhausted every other avenue with nothing left to lose.
Danny
Click to expand...
Click to collapse
Vou are the best, yeppie !! You save my live..because I have not damaged myself and tyrannized my family as it would have been possible, if you had not helped :good: Huawei P9 Plus Dual-Sim
Thank you so much!!
I can't believe how much I have scoured through the interwebs untill i came to your post.
I even went through all other DC-Unlocker options including the HCU client, which I burned another 19e on. -_-
I know you posted this over 3 years ago. But thank you for doing it! <3
Huawei p9
DCStreamer said:
Ok just for completion and anybody who is having the same issues as I have had with the same or similar model of P9, this is how I solved it (after a day without sleep and a couple of migraines). Please note this is only to be used if you have exhausted all other, free options on this forum as this is slightly risky and costs money. It's a last resort.
What you'll need:
- HiSuite installed but closed on your PC
- USB cable to connect phone to PC
- DC-Phoenix with an account with 15 credits (15 Euro)
- The DC-Phoenix guide opened at "Method 2"
- Firmware .img file from their database by clicking "Enter Support Area" button in DC-Phoenix (EVA-AL10_M00A056_Factory_firmware_Global_Nonspecific_Android_6.0_EMUI_4.1.dgtks)
- Stock firmware as an .app file on an SDCard in a folder named "dload" (I used EVA-L09C432B182 (UPDATE.APP))
Method:
1. Copy the official stock firmware .app file to your SDCard inside a folder named "dload".
2. Remove SDCard & Sim Card from the phone.
3. Put your phone in to Fastboot (Turn off phone, hold volume(down), insert usb cable).
4. Load DC-Phoenix and select Fastboot mode.
5. Click "IMG Files" tab and locate the .dgtks file using the "Config or recovery file:" field.
6. DO NOT uncheck the boxes next to "Not erase NV" and "Not erase oeminfo" as this will delete your IMEI and other information completely.
7. Click UPDATE and wait for it to fully finish (you may see an error regarding FBlocks but it should still go on to complete).
8. Once you see it is completed, disconnect phone from PC and restart the phone by holding the power button.
9. This should load you in to a very basic firmware (it may take one or two reboots to achieve this).
10. Insert your SDCard with the newer, official, stock firmware that you want on the phone in to the SDCard slot WITHOUT SimCard.
11. On your phone home you should see an icon named "Upgrade" or "Upgrade/Update Phone" on the first page. (I've forgotten the exact name of the icon but it will be obvious to you).
12. Click that icon and it should go ahead and install the firmware .app on to the phone off your SDCard.
After following the on screen instructions you should now be back to stock firmware. I recommend re-locking your bootloader now using fastboot and your unlock key if you are trying to do so. If you go on to update to Nougat 7.0 before locking your bootloader back up you won't be able to do so without downgrading back to the same firmware that was on your phone when you originally unlocked it.)
Hope this helps somebody who is stuck and exhausted every other avenue with nothing left to lose.
Danny
Click to expand...
Click to collapse
Dear DCStreamer,
I tried to follow your procedures with my Huawei tablet but don't work: where I wrong?
Here’s what you need to fix your P10/P10+ brick.
This method was tested on a bricked P10 (didn’t test on the P10+)
Bootloader already unlocked + Code (no need of twrp)
SD Card
Custom recovery (fix the entire update process)
Stock rom UPDATE.APP from update.zip and update_full_xxx-xxx_hw_xx.zip
for your P10 + P10+ (choose the one you want to install, no need to be the one that come from with your P10, it could be the most recent one but linked to your exact model)
Be patient
Extract the stock rom update.zip and update_full_xxx-xxx_hw_xx.zip, both have an UPDATE.APP,
we are going to flash the one from the update.zip first and repeat the same process for the update_full_xxx-xxx_hw_xx.zip one.
(1)Get ready your SD card
Insert your SD card on the PC, create a folder at the root and name this one dload, move the update.APP from the update.zip
to the dload folder.
(2)Boot your phone in fastboot (Hold Vol- + Power) USB cable need to be plug
Launch terminal on OSX or Windows with adb/fastboot
Write the command fastboot flash recovery customrecovery.img
(3) Before rebooting your phone, insert your sd card that contain dload folder (update.app stock rom from update.zip) inside your P10/P10+
Turn off your P10/P10+
(4) Unplug the USB cable and hold vol+/vol- 5 to 10 sec or (until you see the message this device can not be trusted)
(5)Now the custom recovery updater should trigger and your P10/P10+ is updating, wait until 100% (it restart by itself).
(6)Your P10/P10+ should now boot without problem (bootloader locked)
(7) Is not finish yet, you are going to face NRD90M Test-keys that is normal, you simply need to
flash your cust.
(8) For that, we repeat the same process than before but instead of using the update.app from update.zip, you use the one from update_full_xxx-xxx_hw_xx.zip and replace the one you have on your sd card (dload folder)
(9)reboot your P10/P10+ in fastboot (with of course USB cable plug and hold vol- + power)
There you simply write the command, fastboot oem unlock yourcode. Your phone is going to reset to unlock back your bootloader and you need to go back to fastboot
(10) after that, you reflash again the recovery with customrecovery.img using the command fastboot flash recovery customrecovery.img
and you reboot again in the custom recovery mode (same than before) there the P10/P10+ is updating again, take a few secs
(11) the P10/P10+ will restart and boot in the UI, congrats.:good::good:
P.S : This process was not possible without proper change in recovery and manipulation, hopefully it help you
to recover your brick.
neverd said:
Here’s what you need to fix your P10/P10+ brick.
This method was tested on a bricked P10 (didn’t test on the P10+)
Bootloader already unlocked + Code (no need of twrp)
SD Card
Custom recovery (fix the entire update process)
Stock rom UPDATE.APP from update.zip and update_full_xxx-xxx_hw_xx.zip
for your P10 + P10+ (choose the one you want to install, no need to be the one that come from with your P10, it could be the most recent one but linked to your exact model)
Be patient
Extract the stock rom update.zip and update_full_xxx-xxx_hw_xx.zip, both have an UPDATE.APP,
we are going to flash the one from the update.zip first and repeat the same process for the update_full_xxx-xxx_hw_xx.zip one.
(1)Get ready your SD card
Insert your SD card on the PC, create a folder at the root and name this one dload, move the update.APP from the update.zip
to the dload folder.
(2)Boot your phone in fastboot (Hold Vol- + Power) USB cable need to be plug
Launch terminal on OSX or Windows with adb/fastboot
Write the command fastboot flash recovery customrecovery.img
(3) Before rebooting your phone, insert your sd card that contain dload folder (update.app stock rom from update.zip) inside your P10/P10+
Turn off your P10/P10+
(4) Unplug the USB cable and hold vol+/vol- 5 to 10 sec or (until you see the message this device can not be trusted)
(5)Now the custom recovery updater should trigger and your P10/P10+ is updating, wait until 100% (it restart by itself).
(6)Your P10/P10+ should now boot without problem (bootloader locked)
(7) Is not finish yet, you are going to face NRD90M Test-keys that is normal, you simply need to
flash your cust.
(8) For that, we repeat the same process than before but instead of using the update.app from update.zip, you use the one from update_full_xxx-xxx_hw_xx.zip and replace the one you have on your sd card (dload folder)
(9)reboot your P10/P10+ in fastboot (with of course USB cable plug and hold vol- + power)
There you simply write the command, fastboot oem unlock yourcode. Your phone is going to reset to unlock back your bootloader and you need to go back to fastboot
(10) after that, you reflash again the recovery with customrecovery.img using the command fastboot flash recovery customrecovery.img
and you reboot again in the custom recovery mode (same than before) there the P10/P10+ is updating again, take a few secs
(11) the P10/P10+ will restart and boot in the UI, congrats.:good::good:
P.S : This process was not possible without proper change in recovery and manipulation, hopefully it help you
to recover your brick.
Click to expand...
Click to collapse
Thanks, will try this tomorrow!
This sound interesting if this method is working both P10 and P10+. It mean that we can rebrand all of L09 models to L29 easily. Am i right? No more FunkyHuawei.
Sent from my iPad using Tapatalk
I have a problem, my P10 boots and lets me configure like it's the first time, but doesn't go anywhere from there, just keeps asking the same stuff... Pls help :/
neverd said:
Here’s what you need to fix your P10/P10+ brick.
This method was tested on a bricked P10 (didn’t test on the P10+)
P.S : This process was not possible without proper change in recovery and manipulation, hopefully it help you
to recover your brick.
Click to expand...
Click to collapse
Perfectly. Quite another matter. :good:
CrazyKat8091 said:
This sound interesting if this method is working both P10 and P10+. It mean that we can rebrand all of L09 models to L29 easily. Am i right? No more FunkyHuawei.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Not sure about the rebranding, for that you need to mod your oem info and product/vendor id.
There is no need of FunkyHuawei, I actually don't support those kind of forcing.
SkexxGo said:
I have a problem, my P10 boots and lets me configure like it's the first time, but doesn't go anywhere from there, just keeps asking the same stuff... Pls help :/
Click to expand...
Click to collapse
Question about the bootloader relock
the command to relock is fastboot oem relock yourcode.
Now about your issue, did you try a wipe cache/wipe factory/reset, go into the stock recovery and do a wipe cache/wipe factory reset.
neverd said:
Here’s what you need to fix your P10/P10+ brick.
This method was tested on a bricked P10 (didn’t test on the P10+)
Bootloader already unlocked + Code (no need of twrp)
SD Card
Custom recovery (fix the entire update process)
Stock rom UPDATE.APP from update.zip and update_full_xxx-xxx_hw_xx.zip
for your P10 + P10+ (choose the one you want to install, no need to be the one that come from with your P10, it could be the most recent one but linked to your exact model)
Be patient
Extract the stock rom update.zip and update_full_xxx-xxx_hw_xx.zip, both have an UPDATE.APP,
we are going to flash the one from the update.zip first and repeat the same process for the update_full_xxx-xxx_hw_xx.zip one.
(1)Get ready your SD card
Insert your SD card on the PC, create a folder at the root and name this one dload, move the update.APP from the update.zip
to the dload folder.
(2)Boot your phone in fastboot (Hold Vol- + Power) USB cable need to be plug
Launch terminal on OSX or Windows with adb/fastboot
Write the command fastboot flash recovery customrecovery.img
(3) Before rebooting your phone, insert your sd card that contain dload folder (update.app stock rom from update.zip) inside your P10/P10+
Turn off your P10/P10+
(4) Unplug the USB cable and hold vol+/vol- 5 to 10 sec or (until you see the message this device can not be trusted)
(5)Now the custom recovery updater should trigger and your P10/P10+ is updating, wait until 100% (it restart by itself).
(6)Your P10/P10+ should now boot without problem (bootloader locked)
(7) Is not finish yet, you are going to face NRD90M Test-keys that is normal, you simply need to
flash your cust.
(8) For that, we repeat the same process than before but instead of using the update.app from update.zip, you use the one from update_full_xxx-xxx_hw_xx.zip and replace the one you have on your sd card (dload folder)
(9)reboot your P10/P10+ in fastboot (with of course USB cable plug and hold vol- + power)
There you simply write the command, fastboot oem unlock yourcode. Your phone is going to reset to unlock back your bootloader and you need to go back to fastboot
(10) after that, you reflash again the recovery with customrecovery.img using the command fastboot flash recovery customrecovery.img
and you reboot again in the custom recovery mode (same than before) there the P10/P10+ is updating again, take a few secs
(11) the P10/P10+ will restart and boot in the UI, congrats.:good::good:
P.S : This process was not possible without proper change in recovery and manipulation, hopefully it help you
to recover your brick.
Click to expand...
Click to collapse
Hi neverd, I'm gonna give this method a try. Could you tell me where I can find the appropriate files for my P10 VTR-L29C636B120?
Much thanks.
JustXDAing said:
Hi neverd, I'm gonna give this method a try. Could you tell me where I can find the appropriate files for my P10 VTR-L29C636B120?
Much thanks.
Click to expand...
Click to collapse
Carefully, they use the same name (update.zip) but one is the full ota, the other one the ota mf (cust, etc. the one that you need to flash the second time)
Update.zip VTR-L29C636B120
Update cust/hw xxx
neverd said:
Question about the bootloader relock
the command to relock is fastboot oem relock yourcode.
Now about your issue, did you try a wipe cache/wipe factory/reset, go into the stock recovery and do a wipe cache/wipe factory reset.
Click to expand...
Click to collapse
Thanks about the relock command. I'll try it when I recover my phone.
I tried that, but it's like I don't have the full system installed, I tried a "full" ROM on the first flash, but I don't think it was actually a full rom, it was too small, I wanted to try another one, but the file being over 4gb I can't even copy it to a fat32 sd card... If I find another version that is a little smaller, maybe I could try, but now I only have erecovery, can't access anything else, hope it's enough.
neverd said:
Carefully, they use the same name (update.zip) but one is the full ota, the other one the ota mf (cust, etc. the one that you need to flash the second time)
Update.zip VTR-L29C636B120
Update cust/hw xxx
Click to expand...
Click to collapse
Thanks for the files!
I'm having a problem at step 4, it says software install failed right after 5%.
Just to confirm what I did. Press all 3 buttons (vol up, vol down, power) on until screen shows message.
Guys check this thread https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 it will flash the complete FULL Firmware and you also got your bootloader closed again
JustXDAing said:
Thanks for the files!
I'm having a problem at step 4, it says software install failed right after 5%.
Just to confirm what I did. Press all 3 buttons (vol up, vol down, power) on until screen shows message.
View attachment 4136448
Click to expand...
Click to collapse
I'm having the same problem, can someone send me the files to the VTR-L09 C432? Or maybe the VTR-L29 if my phone supports it, I'd like the dual sim feature.
Just to make sure I'm using the right firmware.
If I find a solution I'll share it here as well btw.
crucky said:
Guys check this thread https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 it will flash the complete FULL Firmware and you also got your bootloader closed again
Click to expand...
Click to collapse
Does it work for P10 Plus (VKY) ? I only see VTR oeminfo/recoveries files in the zip.
Edit : I went ahead and renamed everything in the VTR folder to VKY (except for eominfo files, since I just want to update), and it worked ! Updated from VKY-L29C432B123 to B130
Hi all,
I have the same issue software install failed right after 5%. Did anyone get past this?
What other files other than update in dload folder need to be present?
Thanks
---------- Post added at 05:09 PM ---------- Previous post was at 04:33 PM ----------
SkexxGo said:
I'm having the same problem, can someone send me the files to the VTR-L09 C432? Or maybe the VTR-L29 if my phone supports it, I'd like the dual sim feature.
Just to make sure I'm using the right firmware.
If I find a solution I'll share it here as well btw.
Click to expand...
Click to collapse
Have a look for files :
http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR&firmware_page=0
I think it is the FULL OTA required.
I still cannot get mine to go past 5% stage.
Atf130 said:
Hi all,
I have the same issue software install failed right after 5%. Did anyone get past this?
What other files other than update in dload folder need to be present?
Thanks
---------- Post added at 05:09 PM ---------- Previous post was at 04:33 PM ----------
Have a look for files :
http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR&firmware_page=0
I think it is the FULL OTA required.
I still cannot get mine to go past 5% stage.
Click to expand...
Click to collapse
I've did it with mine, take a look to this post https://forum.xda-developers.com/ma...te-package-t3593108/post72148764#post72148764
CrazyKat8091 said:
This sound interesting if this method is working both P10 and P10+. It mean that we can rebrand all of L09 models to L29 easily. Am i right? No more FunkyHuawei.
Click to expand...
Click to collapse
Really interested in this one too. Do you have any additional information please? As I just have plan to pull the trigger on funkyhuawei method during the next weekend... But of course I would rather use this manual method if possible.
Guys, did you flash the custom recovery before trying to update.
You really need to flash the stock recovery with the custom recovery, this fix the 5% update fail.
You can also flash recovery2 with.
neverd said:
Guys, did you flash the custom recovery before trying to update.
You really need to flash the stock recovery with the custom recovery, this fix the 5% update fail.
You can also flash recovery2 with.
Click to expand...
Click to collapse
Write that you need to extract customrecovery.img from customrecovery.zip. That would be understandable.
Hi,
does this work - i bricked my Huawei P10 with VTR-L29C432B113 firmware like this
Installed TWRP and i flashed magisk.zip -> that worked for a while
But on next phone reboot it says there is no space on the storage 0%
Now i cant do anything - phone is not usable..
Exept booting twrp and fastboot&rescue mode wich shows
PHONE unlocked
FRP Lock
When i try to
fastboot flash boot boot.img it says that stupid message command not allowed..
I tried to put in a SD Card with the folder dload and an update.app on it in and tried to flash it via VOL+ and VOL- but that fails
Does the provided method work or what can i do?
Thanks! chrizz
Downgrading Huawei P Smart, Unlocking bootloader and installing TWRP
Hello! In this tutorial i will show how you can, downgrade you phone, installing TWRP + root!
Why you need downgrade? You need to downgrade security patch to read bootloader unlock code.
Lets start!
Note: This method will cost 4euro/dollar. You need buy 4 credits to DC unlocker. Just google for it.
Note 2: Backup your important files. You need reset your phone twice.
Note 3: Im not resposible if you success to brick your phone. I can always help, if you have Discord you can contact ScaryG#8540/B] or just ask in comments
Note 4: Twrp wont work with custom roms :/
Also if something missing from tutorial, please tell down. I will fix them as soon as possible:good:
Part 1. Downgrading
You need 16 GB SD card. First format it to extFat. Then download firmware from androidhost.ru, i used FIG-LX1 8.0.0.128A(C432) Download it. ( Links below! ) Then find dload folder from zip and extract into SD card (Remember to format SD Card into extFat)
Wait until it extracts. Now put your SD Card into your phone. Call *#*#2846579#*#*, locate for software upgrade and press SDCard Upgrade button. Now your phone is installing the update. Wait until installs. After install, you should get bootloop. In this part Press Volume UP + Power button, go to recovery and do factory reset. Now wait until boots. Go to settings -> about, and you should see version (128A). Boom! You have done downgrade...
Part 2. Unlocking Bootloader
Okay. Now get DC Unlocker ready, select auto detect Huawei Phones. Now go to again call to *#*#2846579#*#* and enable manufacturer mode. Try auto detect. It should detect your phone. Now simply, press the Unlock button. You should get your bootloader code, take it up. Enable developer options on your phone, go to USB Debugging and turn it on, also turn OEM Unlocking on. Then open cmd and type cd (same path as dc unlocker folder). Type adb devices It should start ADB daemon. Check your phone, you should get ADB trust popup, Allow it! Then check again adb devices, your device should be there. Now type adb reboot bootloader After it type: fastboot oem unlock (your key) ex. fastboot oem unlock 12345678. Check your phone, and press yes. Yeet! Your bootloader is now unlocked! Type fastboot reboot to reboot! Now goes kinda easy part!
Part 3. Installing TWRP
Download TWRP for Huawei P Smart. I put links below.
Move file to same folder as DC Unlocker and rename it to recovery.img
Anyways, your phone should be resetted again...
Go again enable developer options + enabling USB Debugging. Then again confirm...
Now do again adb reboot bootloader now type fastboot flash recovery_ramdisk recovery.img Now it should be flashed. Get into TWRP by pressing Power button and Volume up. Now you can root and flash zips!
Thats it, i hope it helped :good:
Downloads:
FIRMWARE: https://androidhost.ru/3c9
( FIGO-L31 FIG-L31 FIG-LX1 8.0.0.128A(C432) FIRMWARE ANDROID 8.0.0 EMUI 8.0.0 05014XMW )
TWRP: https://forum.xda-developers.com/hu...huawei-p-smart-twrp-3-2-1-0-emui-8-0-t3786105
Please tell if any problems here?
ScaryG said:
Please tell if any problems here?
Click to expand...
Click to collapse
Hi.
I am FIG-LX1c109b138
and dc-unlocker told me not supported.
how can I have the bootloader code.
I downloaded c109b125 and c109b130
SD card dload folder and update.app reboot to volume + and -.
but it remains stuck on 5% and restarts.
can you help me.
Chisetdel31260 said:
Hi.
I am FIG-LX1c109b138
and dc-unlocker told me not supported.
how can I have the bootloader code.
I downloaded c109b125 and c109b130
SD card dload folder and update.app reboot to volume + and -.
but it remains stuck on 5% and restarts.
can you help me.
Click to expand...
Click to collapse
You need download the update, then extract all from zip. Not only update app.
ScaryG said:
You need download the update, then extract all from zip. Not only update app.
Click to expand...
Click to collapse
ok, can you share a photo of your dload folder.
to be sure of what I'm doing.thank you
also, currently on dc-unlocker I download fig-lx1c109b125a I hope he can demote it.
Chisetdel31260 said:
ok, can you share a photo of your dload folder.
to be sure of what I'm doing.thank you
also, currently on dc-unlocker I download fig-lx1c109b125a I hope he can demote it.
Click to expand...
Click to collapse
Okay. Here.
So thats whats inside dload folder.
ScaryG said:
Okay. Here.
So thats whats inside dload folder.
Click to expand...
Click to collapse
Thank you, I managed to do it with fig-lx1c109b133. And I received the bootloader code now.
Chisetdel31260 said:
Thank you, I managed to do it with fig-lx1c109b133. And I received the bootloader code now.
Click to expand...
Click to collapse
Nice to hear. Could you thank the post.
Thanks
The SD Card Upgrade fails every time for me. I have tried everything it seems :/
Once I unlock how do I upgrade to EMUI 9 without loosing the unlock
Linux Lounge said:
Once I unlock how do I upgrade to EMUI 9 without loosing the unlock
Click to expand...
Click to collapse
Hi ! Hope you saved the unlock code somewhere
If yes, you can upgrade any way you want. Just redo 'fastboot oem unlock xxxxx' after successful upgrade. (Worked for me on EMUI 9.0.1.115)
It will unlock and wipe again..
As for me, this is the point I'm stuck at :
- latest EMUI FIG-LX1 9.0.1.120 (C432)
- bootloader unlocked
- can flash twrp, allow it to prevent being overriden, then flash Magisk 19.3 without error in the log.
After that, phone boots ok but Magisk Manager says 'not installed' and TWRP must be reflashed again.
Anyone can help further ? I've read about patched boot images to be flashed with fastboot. Are they just Magisk patched or some additional security level hacking required ?
Thanks XDA
Hi.
Just FYI, afters hours, I managed to finish the procedure and restore full root/magisk under latest EMUI 9.1.0.120 (E)
I had to use magisk uninstaller under TWRP, then reflashed Magisk 19.3
Now everything sticks :
- TWRP 3.2.0_1
- Root access
- Magisk is detected as installed and running
I mainly use "systemless hosts" with Adaway and it's OK.
Did not test any other module yet.
Hi,
I bought 4 credits online for the dc unlocker, but how do i run it?
this part: "Okay. Now get DC Unlocker ready, select auto detect Huawei Phones"
How do i do that?
Sorry fo the noob question, would be great if you could clarify
cheers
boscovicz said:
Hi,
I bought 4 credits online for the dc unlocker, but how do i run it?
this part: "Okay. Now get DC Unlocker ready, select auto detect Huawei Phones"
How do i do that?
Sorry fo the noob question, would be great if you could clarify
cheers
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p-smart/how-to/guide-downgrade-bootloader-unlock-t3884725
im gonna be doing that in next few days
Linux Lounge said:
Once I unlock how do I upgrade to EMUI 9 without loosing the unlock
Click to expand...
Click to collapse
Just unlock bootloader with same way on emui 9.
Hey there! I've tried downgrading but i instantly get the message "Software install failed." before it even starts to install. Any ideas?
Can't downgrade from android 9.1, everytime said Software install failed
Thanks for the tutorial. I was able to install the older EMUI 8.0 version and unlock the bootloader of a FIG-LX1 (C432). Two tips:
I was able to use a uSD formatted in FAT32, I did not need to format it again using ExtFAT
When using the DC Huawei Bootloader Codes app from PlayStore to buy the credits, select Android 7 to get charged for just 4 credits, otherwise it will try to charge for a 3-day license
Make sure the phone has 8.0.0.128A or older, and DC Unlocker 2 recognizes the phone properly before buying anything (if it is not the correct version, it will tell you to use the test/probe point method)
ScaryG said:
Downgrading Huawei P Smart, Unlocking bootloader and installing TWRP
Hello! In this tutorial i will show how you can, downgrade you phone, installing TWRP + root!
Why you need downgrade? You need to downgrade security patch to read bootloader unlock code.
Lets start!
Note: This method will cost 4euro/dollar. You need buy 4 credits to DC unlocker. Just google for it.
Note 2: Backup your important files. You need reset your phone twice.
Note 3: Im not resposible if you success to brick your phone. I can always help, if you have Discord you can contact ScaryG#8540/B] or just ask in comments
Note 4: Twrp wont work with custom roms :/
Also if something missing from tutorial, please tell down. I will fix them as soon as possible:good:
Part 1. Downgrading
You need 16 GB SD card. First format it to extFat. Then download firmware from androidhost.ru, i used FIG-LX1 8.0.0.128A(C432) Download it. ( Links below! ) Then find dload folder from zip and extract into SD card (Remember to format SD Card into extFat)
Wait until it extracts. Now put your SD Card into your phone. Call *#*#2846579#*#*, locate for software upgrade and press SDCard Upgrade button. Now your phone is installing the update. Wait until installs. After install, you should get bootloop. In this part Press Volume UP + Power button, go to recovery and do factory reset. Now wait until boots. Go to settings -> about, and you should see version (128A). Boom! You have done downgrade...
Part 2. Unlocking Bootloader
Okay. Now get DC Unlocker ready, select auto detect Huawei Phones. Now go to again call to *#*#2846579#*#* and enable manufacturer mode. Try auto detect. It should detect your phone. Now simply, press the Unlock button. You should get your bootloader code, take it up. Enable developer options on your phone, go to USB Debugging and turn it on, also turn OEM Unlocking on. Then open cmd and type cd (same path as dc unlocker folder). Type adb devices It should start ADB daemon. Check your phone, you should get ADB trust popup, Allow it! Then check again adb devices, your device should be there. Now type adb reboot bootloader After it type: fastboot oem unlock (your key) ex. fastboot oem unlock 12345678. Check your phone, and press yes. Yeet! Your bootloader is now unlocked! Type fastboot reboot to reboot! Now goes kinda easy part!
Part 3. Installing TWRP
Download TWRP for Huawei P Smart. I put links below.
Move file to same folder as DC Unlocker and rename it to recovery.img
Anyways, your phone should be resetted again...
Go again enable developer options + enabling USB Debugging. Then again confirm...
Now do again adb reboot bootloader now type fastboot flash recovery_ramdisk recovery.img Now it should be flashed. Get into TWRP by pressing Power button and Volume up. Now you can root and flash zips!
Thats it, i hope it helped :good:
Downloads:
FIRMWARE: https://androidhost.ru/3c9
( FIGO-L31 FIG-L31 FIG-LX1 8.0.0.128A(C432) FIRMWARE ANDROID 8.0.0 EMUI 8.0.0 05014XMW )
TWRP: https://forum.xda-developers.com/hu...huawei-p-smart-twrp-3-2-1-0-emui-8-0-t3786105
Click to expand...
Click to collapse
I can only thank you hugely for this clear concise instruction. Well worth £3.41 to DC Unlocker developers! Finally an unlocked bootloader on my wifes phone. I'm a definite Xiaomi phone fan compared to the ridiculous hoops Huawei make people go thru with their locked down phones. Gave up with Samsung years back too for the same reason. Cheers
Hello , I have model FIG LX1 and I want to flash roms. I need to follow this guide ?
And basically I have to pay ? What the hell