A lot of users are saying they got an update with August security patches and other improvements.
But now it's almost the end of August and I haven't have got any update after the July update.
Build number: LLD-AL10 8.0.0.170(C675)
Varient:Indian
Any help?
1.) Is your boot-loader unlocked ?
2.) Do you have a Custom Kernel or Recovery Installed?
3.) Are you Rooted?
If the answer is yes to any of them then thats why your not getting any OTA's, If Yes is on 1.) then simply issue the fastboot command to relock the device "fastboot oem relock <bootloader-code>" If its yes to 2.) / 3.) Then your going to need to flash the phone back to stock before then relocking the bootloader.
hacktrix2006 said:
1.) Is your boot-loader unlocked ?
2.) Do you have a Custom Kernel or Recovery Installed?
3.) Are you Rooted?
If the answer is yes to any of them then thats why your not getting any OTA's, If Yes is on 1.) then simply issue the fastboot command to relock the device "fastboot oem relock <bootloader-code>" If its yes to 2.) / 3.) Then your going to need to flash the phone back to stock before then relocking the bootloader.
Click to expand...
Click to collapse
1) Was unlocked
2)Had TWRP
3)Was rooted
I switched back to stock because of constant bugs especially the camera(what's the use of keeping a camera oriented phone in the pocket if it's camera is of no use?)
I'd used HuRupdater to flash the firmware. Now bootloader's relocked and everything's working fine except updates.
I think I flashed the wrong firmware maybe ( I forgot the build number so had to guess. I was sure I had an LLD-AL10 and that there was a C675 and 8.0 in the build number. I matched the changelog with that of the last update I got and then I kinda found out that everything matched to LLD-AL10 8.0.0.170(C675) )
Would one stop getting updates if they installed wrong firmware?
Everything works fine except updates.( And the bootloader 'relocked' status in fastboot).
Should I just flash the August update with HuRupdater( that's gonna be a lot of hassle as I have to unlock bootloader and do all those stuff) or can I update via any other method?
Right you can use Firmware finder on your phone which is a good start.
So using FF select then next version up from your current and only select a OTA-MF, then make sure its for your phone by clicking check firmware access.
If its for your phone then simply use the in-app proxie and connect to a wifi point. Once you have done this edit that Wifi via Settings and change the Proxie to Localhost port 8080. Then go the System and Update.
Now it should download the small version OTA to your phone and reboot to try to install it, it it goes thought and installs without error then great, if it errors out when you boot back into android it will offer the Full OTA without using FF to which will then flash proper without losing data then see if OTA's work after that.
hacktrix2006 said:
Right you can use Firmware finder on your phone which is a good start.
So using FF select then next version up from your current and only select a OTA-MF, then make sure its for your phone by clicking check firmware access.
If its for your phone then simply use the in-app proxie and connect to a wifi point. Once you have done this edit that Wifi via Settings and change the Proxie to Localhost port 8080. Then go the System and Update.
Now it should download the small version OTA to your phone and reboot to try to install it, it it goes thought and installs without error then great, if it errors out when you boot back into android it will offer the Full OTA without using FF to which will then flash proper without losing data then see if OTA's work after that.
Click to expand...
Click to collapse
I checked and this is what happened.
FF detected my phone as LLD-AL10C675
The latest update that's is approved is
LLD-AL10 8.0.0.181(C675CUSTC675D1)
It is B181
But that update is from June. So I searched for LLD-AL10 and pressed ok , so that it shows all firmwares for lld al10.
And I think I found the one I have currently installed(build number and changelog matches) LLD-AL10 8.0.0.170(C675CUSTC675D1). It is from 11/7/2018. Everything above says either firmware not approved or has a wierd term cn in the available models section.
This is something I quite don't understand. When I check firmware access it says lld-al10:all-cn.
I think cn stands for China.( Uploading screenshot)
Would it be safe for me to install the update?
Also is it necessary to download the update just above the one I have installed now or can I skip to the latest one?
Sorry if that's a lot of questions.
I'm in a tight corner now.
I can't get any updates using the dns method or the in app proxy method.
This sucks as I was able to get an update using the dns method 3 weeks back. I didn't install it. I checked for updates, it showed updates, then I stopped dns and things went back to how it was(no updates ?). Today I tried again and nothing happened.
Crazy phone?
Are you selecting the smaller updates as it will not work with full ota's any more.
Sent from my LLD-L31 using Tapatalk
hacktrix2006 said:
Are you selecting the smaller updates as it will not work with full ota's any more.
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
I tried it with both the small one and full ota update
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
hacktrix2006 said:
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
Yup I'm sure I did those right. I tried both the VPN and proxy methods. As I told VPN used to work.
Anyways I'm gonna wait and try it a few more times. Then I might use HuRupdater.
Thanks for your replies man ?
hacktrix2006 said:
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
OMFG bro I fixed it.
You see Huawei had rolled out an update for the 'system update' app through playstore. I had updated it. And after I uninstalled the update for it, things are starting to work again ?.
Only 3 questions remains.
1) Can I install firmware that is not approved?
2)Is it necessary to install the update just above the version I
have currently installed?
3)Is it okay if FF says it's approved but has the part LLD-AL10-
all-cn:all ?
Does the cn part matter ?
Would be very grateful if you could help
1) Yes
2) No
3) CN= China. Personally I wouldn't, plus I don't speak Chinese , why would you want to ? I also like having full access to Google playstore.
On an aside, I'm beginning to get the impression you won't be happy till you really brick your phone . :laugh::laugh:
hacktrix2006 said:
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
Sparkrite said:
1) Yes
2) No
3) CN= China. Personally I wouldn't, plus I don't speak Chinese , why would you want to ? I also like having full access to Google playstore.
On an aside, I'm beginning to get the impression you won't be happy till you really brick your phone . :laugh::laugh:
Click to expand...
Click to collapse
?That's kinda my thing (I desperately break stuff then fix them)?
Thans ?
hacktrix2006 said:
Well it worked for me from going from LLD-L31c432b133 to LLD-L31c432b136 as the small OTA came down failed to install so then it downloaded the full version are you sure your setting the WiFi to use the proxies using localhost and port 8080?
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
I have tried this procedure more than three times and it just doesn't work. I have the same model version C432 and the same firmware B133. I even downloaded the full Ota file and tried through SD card update ("#" #2846579#"#"), still nothing. When I connect it to Hisuite it says that I have the last official version. Any suggestions?
rostropol said:
I have tried this procedure more than three times and it just doesn't work. I have the same model version C432 and the same firmware B133. I even downloaded the full Ota file and tried through SD card update ("#" #2846579#"#"), still nothing. When I connect it to Hisuite it says that I have the last official version. Any suggestions?
Click to expand...
Click to collapse
I used the FF app on mobile then used in app proxie connected to a wifi point and edited the connection to enable proxie on localhost port 8080. I also only downloaded only the small OTA, however it will fail to install then once you rebooted back into android go system update and then press the 3 dots and go for Full Download that will fix it.
Just a point you may have the same Firmware even the same model but they are not made equal.
Also check Google play store app for Huawei System Update it should look like the picture that's attached then click uninstall and reinstall install the app too before starting as reinstalling that app can help alot.
hacktrix2006 said:
I used the FF app on mobile then used in app proxie connected to a wifi point and edited the connection to enable proxie on localhost port 8080. I also only downloaded only the small OTA, however it will fail to install then once you rebooted back into android go system update and then press the 3 dots and go for Full Download that will fix it.
Just a point you may have the same Firmware even the same model but they are not made equal.
Also check Google play store app for Huawei System Update it should look like the picture that's attached then click uninstall and reinstall install the app too before starting as reinstalling that app can help alot.
Click to expand...
Click to collapse
Many thanks for your prompt reply.
So Ive already done all this because it may be related but no luck.Last time I used FF was to get the B133 which already didnt work on the 7th August,I then uninstalled the FF app,stopped the proxy localhost etc. and right after that I did the update check through system update and the B133 FULL was offered to download,so the B133 was made properly through system update right after all the procedure with the FF.
rostropol said:
I have tried this procedure more than three times and it just doesn't work. I have the same model version C432 and the same firmware B133. I even downloaded the full Ota file and tried through SD card update ("#" #2846579#"#"), still nothing. When I connect it to Hisuite it says that I have the last official version. Any suggestions?
Click to expand...
Click to collapse
Try uninstalling the update for the system update app then use the VPN or proxy method.
Maybe the update just hasn't reached you like me.
Fredin_ said:
Try uninstalling the update for the system update app then use the VPN or proxy method.
Maybe the update just hasn't reached you like me.
Click to expand...
Click to collapse
"Maybe the update just hasn't reached you like me"...I will keep that and just have patience. Ive tried everything but there is no update yet....
Many thanks once again for your reply
rostropol said:
I have tried this procedure more than three times and it just doesn't work. I have the same model version C432 and the same firmware B133. I even downloaded the full Ota file and tried through SD card update ("#" #2846579#"#"), still nothing. When I connect it to Hisuite it says that I have the last official version. Any suggestions?
Click to expand...
Click to collapse
rostropol said:
"Maybe the update just hasn't reached you like me"...I will keep that and just have patience. Ive tried everything but there is no update yet....
Many thanks once again for your reply
Click to expand...
Click to collapse
?.
Related
I came from a long way to this point. In this thread (https://forum.xda-developers.com/p9-plus/help/bluetooth-issue-vie-l09c25b320-t3548885) you have all the steps that I made but, summarizing, I unlock the bootloader using a official code, I failed flashing the first time so I ended with a NRD90M version with no Bluetooth, no keyboard... I managed to update again using the finnish rollback package for VIE-L09, in this point I ended with a L09C900 and BT working. As everything works it seems that was the moment to flash again to a final version so I access through SRK Tool and change the OEMINFO to the EU one (mine was LA) and flash directly through the 3 buttons mode the full C432B180 (or 181, not sure) but ended with C432B181, wich doesn't receive OTA, so I decided to flah to the final stock rom, the C432B360 version with Nougat. It fails at 63% (more or less). Then I tried with a MM version so I force the update again but this time to the C432B170. And failed. On this point a message saying that my phone is encrypted and that I must access a decryption password appears. So I decided to force it again to the C432B160 and now my phone is stuck in the BOOT screen (the one that warns about that my phone it unlocked with orange letters), does't boot in to Recovery, or ERecovery. The 3 buttons method don't work anymore and the phone doesn't turn off till the battery is drained
I only managed to enter to Fastboot mode and shows that the phone stills unlocked and the FRP too.
What can I do to unbrick my device?? DC Phoenix?? Fatboot flashing BOOT.img, RECOVERY.img??
PLEASE HELP :crying:
Dude.. sorry to hear it!
Maybe a flash of original recovery.img would help? FAstboot works as it should?
If you can get Power+Vol Up/Down to work again, you should rollback with finnish .APP, then flash B181, .. then find the complete guide in this thread
---------- Post added at 11:12 AM ---------- Previous post was at 10:55 AM ----------
Have you tested DC?
deecept said:
Dude.. sorry to hear it!
Maybe a flash of original recovery.img would help? FAstboot works as it should?
If you can get Power+Vol Up/Down to work again, you should rollback with finnish .APP, then flash B181, .. then find the complete guide in this thread
---------- Post added at 11:12 AM ---------- Previous post was at 10:55 AM ----------
Have you tested DC?
Click to expand...
Click to collapse
Thanx @deecept for your reply.
Well I think that Fastboot works as it should and I will try as soon as I turn back home to flash RECOVERY.img and I will let you know how it goes.
I'll try again if I could fix the Pwr+VOL Up/Down but I not really sure if it would work.
Dc Phoenix I try it a few weeks ago but with no results. But, in this case, probably it would be the best option. But I want to do it nowing what to do exactly because the last time I spend 23€ for nothing.
I would maybe try to flash the original marshmellow recovery.img, to see if that makes any difference.
Here is some files to aid you.
deecept said:
I would maybe try to flash the original marshmellow recovery.img, to see if that makes any difference.
Here is some files to aid you.
Click to expand...
Click to collapse
Thankyou @deecept as soon as I arrive home I'll try and text what happens.
Any news, @Kifivierito?
deecept said:
Any news, @Kifivierito?
Click to expand...
Click to collapse
Hey @deecept, nothing. No changes. Yesterday I flash through fastboot Recovery.img, System.img, Boot.img, cache.img, Cust.img and even Userdata.img. But nothing changes. The device still in a bootloop. I'm thinking to use again DC Unlocker, but I'm not sure exactly what to do? If I need to flash a whole update.app or something else. I don't want to spend the money if im not sure what to do.
Btw, something strange happens in fastboot mode. When I try to erase the cache.img it shows the message that Remote command not allowed. But it let me flash every file that I mention. ¿?¿?
In fastboot mode it shows that Phone is Unlocked and FRP too...
@deecept I finally managed to flash and function L09C432B360 usind DC Phoenix. But I found that, again, I havent the data_full package installed so I dont have AGAIN :crying: neither BT or themes or the update section in adjustments. I want to kill my self.... :cyclops:
How can I add them??
If I use DC Phoenix in which order I must flash the files? I have the file update_data_full_hw_eu. I tried to flash it after flash the update.app of the L09C432B360, but dont work
Kifivierito said:
@deecept I finally managed to flash and function L09C432B360 usind DC Phoenix. But I found that, again, I havent the data_full package installed so I dont have AGAIN :crying: neither BT or themes or the update section in adjustments. I want to kill my self.... :cyclops:
How can I add them??
If I use DC Phoenix in which order I must flash the files? I have the file update_data_full_hw_eu. I tried to flash it after flash the update.app of the L09C432B360, but dont work
Click to expand...
Click to collapse
Downgrade to B181 and follow this guide.
What you need?
1. Charged phone
2. Enabled installing unknown apps
3. Download Firmware Finder from Google Store (the free version)
what next?
1. Run Firmware Finder
2. Go to settings and Enable Installation via system update.
3. Tool will prompt to download Firmware Finder Proxy - do it then install it
4. Go back to the tool and select firmware of your choice - make sure you select FULL (not OTA)
5. Firmware Finder Proxy window will open - do as described - go to Wifi, advanced add manual proxy as local host with 8080 port
6. Go to phone Settings - System update, DO NOT CLICK ON UPDATE, just click on Menu and choose to "Download latest full package" and then click on Update the phone
7. It will attempt to download it but it may fail (as in my case) with message about unstable internet connection - go back to wifi settings and disable proxy, go back to update and resume it - update should start to download then follow as on screen instructions
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Downgrade to B181 and follow this guide.
What you need?
1. Charged phone
2. Enabled installing unknown apps
3. Download Firmware Finder from Google Store (the free version)
what next?
1. Run Firmware Finder
2. Go to settings and Enable Installation via system update.
3. Tool will prompt to download Firmware Finder Proxy - do it then install it
4. Go back to the tool and select firmware of your choice - make sure you select FULL (not OTA)
5. Firmware Finder Proxy window will open - do as described - go to Wifi, advanced add manual proxy as local host with 8080 port
6. Go to phone Settings - System update, DO NOT CLICK ON UPDATE, just click on Menu and choose to "Download latest full package" and then click on Update the phone
7. It will attempt to download it but it may fail (as in my case) with message about unstable internet connection - go back to wifi settings and disable proxy, go back to update and resume it - update should start to download then follow as on screen instructions
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
I downgrade back to C181. Everything was fine. I had my BT, themes, everything... Ok I perform the FF upgrade (changing advanced proxy settings and everything). Go to FF, send the ROM to the updater, in the updater I select full package and start upgrading. The device perform the upgrade weirdly fast (3 or 4 mins maximum), and restart and perform a System optimization. When it stops, restart again and susrprise! I have AGAIN NRD90M Test-keys! How is this even possible @Mostar088???
Kifivierito said:
I downgrade back to C181. Everything was fine. I had my BT, themes, everything... Ok I perform the FF upgrade (changing advanced proxy settings and everything). Go to FF, send the ROM to the updater, in the updater I select full package and start upgrading. The device perform the upgrade weirdly fast (3 or 4 mins maximum), and restart and perform a System optimization. When it stops, restart again and susrprise! I have AGAIN NRD90M Test-keys! How is this even possible @Mostar088???
Click to expand...
Click to collapse
Did u choose this Firmware FULL OTA MF-PV?
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Did u choose this Firmware FULL OTA MF-PV?
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Yes. I selected that one.
I'm trying to repeat all the process again. I just flash via DC Phoenix B181 again without problem via fastboot but again (previously I dont mentioned it) when performing the second step in DC Phoenix, the upgrade mode flash, fails writing the VERLIST.img.
The firs time that I did it also fails but as I restart and everything works fine I forgot it.
Do you think it could affect to the FF process??
Should I continue redoing again everything??
Thx again @Mostar088. It's being a very long and boring process.
Kifivierito said:
Yes. I selected that one.
I'm trying to repeat all the process again. I just flash via DC Phoenix B181 again without problem via fastboot but again (previously I dont mentioned it) when performing the second step in DC Phoenix, the upgrade mode flash, fails writing the VERLIST.img.
The firs time that I did it also fails but as I restart and everything works fine I forgot it.
Do you think it could affect to the FF process??
Should I continue redoing again everything??
Thx again @Mostar088. It's being a very long and boring process.
Click to expand...
Click to collapse
Dont know if it affects the FF, i realy dont know what can be wrong.
U have 72h to use Dc Phoenix so try again.
Try flash a MM with a lower build like B170 or 161 and see if u recive OTA to update B181 just to see if that works before u proceed to upgrade N.
Edit: when u downgrade try update by dload method from B170 to B180 and then if u recive OTA for B181.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Dont know if it affects the FF, i realy dont know what can be wrong.
U have 72h to use Dc Phoenix so try again.
Try flash a MM with a lower build like B170 or 161 and see if u recive OTA to update B181 just to see if that works before u proceed to upgrade N.
Edit: when u downgrade try update by dload method from B170 to B180 and then if u recive OTA for B181.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Ok. I'll work on it and tell you about
Mostar088 said:
Dont know if it affects the FF, i realy dont know what can be wrong.
U have 72h to use Dc Phoenix so try again.
Try flash a MM with a lower build like B170 or 161 and see if u recive OTA to update B181 just to see if that works before u proceed to upgrade N.
Edit: when u downgrade try update by dload method from B170 to B180 and then if u recive OTA for B181.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Nothing. Again bricked. This time DC Phoenix either can't flash. Still having an error when writing VERLIST.img. No matter which version. I tried B170 and B160.
I read in DC Unlocker forum that a way to fix the VERLIST.img flash fail in upgrade mode is trying to repeat flashing using the dload mode. But it also fails.
Really I think I'm cursed... I'll try to go to the very first step. I'll change oeminfo to the original one (LA) and there I'll try to downgrade. I don't know what else to do
Kifivierito said:
Nothing. Again bricked. This time DC Phoenix either can't flash. Still having an error when writing VERLIST.img. No matter which version. I tried B170 and B160.
I read in DC Unlocker forum that a way to fix the VERLIST.img flash fail in upgrade mode is trying to repeat flashing using the dload mode. But it also fails.
Really I think I'm cursed... I'll try to go to the very first step. I'll change oeminfo to the original one (LA) and there I'll try to downgrade. I don't know what else to do
Click to expand...
Click to collapse
I think it's the best to try that.
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
I think it's the best to try that.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Did you know where I can find a LA oeminfo?? Because in SRT Toolkit just appears Chinese, Euro, African and Asia.
¡¡¡YESSS!! FINALLY. I MADE IT!!!
VIE-L09C432B360 Working properly with Bluetooth, Themes, Apps and all the great stuff from a Huawei Stock version!
I have two theories about why I was failing over and over after flashing B181 and updating to higher versions:
1. Phone was updated properly but as soon as it synchronize with google, something doesn't match with the ner version and end in NRD90M Test-Keys. So previously to the last update, after flashing with DC Unlocker (to exit the bootloop), I go to my google account Device Manager and delete the previous VIE-L09 that I have registered.
2. The other theory was that, all the times that I flash and update I allways was with the bootloader unlocked. This time, after flashing the B181 version y relock the bootloader.
One of this steps help me finally made the update:
I will wrote a thread trying to explain how I did it and adding the files that I use.
I wanna thank @Masters_2017, @CNHowardLai, @deecept and specially @Mostar088, @M.KK for their selfless help for nearly a month.
Best regards!
Help i'm stuck
Hey @Kifivierito! can u help me? i'm stuck with your same problem. Ok i was on C900B174 (or173, yes a global one) then i've tried to update to C432B360, but i've got the "test key version" without the keyboard, (NRD90M Test-keys).
So, i rollback to MM with a package, and i got the C900 version again. Through an update i went on Nougat C900 version without many things that were missing (like the updater app). I go back again to MM and this time i've changed the oem file to C432, then, first i unlocked my bootloader and i rooted sucessfully my phone, installing TWPR recovery too. I would come back to stock with a C432B103 version to lock bootIoader and restore. i've decided to download w "firmware finder" the full rom version C432B360 u installed,following all the instructions, but i cannot install it (i think 'cause of my stupid modifications xD ). Now i'm tring to go stock w C432B181, hoping that the bootloader will be locked again. Idk really what should i do now, i'm really getting frustrated.
Pls help me!
EDIT: Ok this one works great C432B181, now i'm scared to update xD
dr.feelgoodthedj said:
Hey @Kifivierito! can u help me? i'm stuck with your same problem. Ok i was on C900B174 (or173, yes a global one) then i've tried to update to C432B360, but i've got the "test key version" without the keyboard, (NRD90M Test-keys).
So, i rollback to MM with a package, and i got the C900 version again. Through an update i went on Nougat C900 version without many things that were missing (like the updater app). I go back again to MM and this time i've changed the oem file to C432, then, first i unlocked my bootloader and i rooted sucessfully my phone, installing TWPR recovery too. I would come back to stock with a C432B103 version to lock bootIoader and restore. i've decided to download w "firmware finder" the full rom version C432B360 u installed,following all the instructions, but i cannot install it (i think 'cause of my stupid modifications xD ). Now i'm tring to go stock w C432B181, hoping that the bootloader will be locked again. Idk really what should i do now, i'm really getting frustrated.
Pls help me!
EDIT: Ok this one works great C432B181, now i'm scared to update xD
Click to expand...
Click to collapse
Hey @dr.feelgoodthedj,
sorry for the late reply. Well that last edit of your post are good news. If you have C432B181 running without problem now you only have to follow the steps tu upgrade via FFinder with the FF Proxy settings. If you follow step by step the guide, you will end up with your P9 Plus with Android 7 and everything working.
If you perform it and fail again, don't hesitate and repeat the process trying one of the two points that I write In my last post. Try to access to google my devices and delete the previous P9 that you have. And after that, if still don't working try to relock your bootloader.
With one of this two steps it MUST work.
Good luck!
Hello
In two files full ota mf pv. For c440 + (MM , bootloader, twrp MM flash update.zip + updatedatafull.zip, REBOOT)
2017.07.21 VNS-L31C440B383 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v91311/f2/full/update.zip
updatedatafull http://update.hicloud.com:8180/TDS/...-L11_ee_gb/update_data_full_VNS-L11_ee_gb.zip
2017.06.08 VNS-L31C440B382 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v87647/f2/full/update.zip
updatedatafull http://update.hicloud.com:8180/TDS/...-L11_ee_gb/update_data_full_VNS-L11_ee_gb.zip
Firmware for L31c440b380, on Firmware Finder FullOTA-MF-PV version.
2017.06.05 VNS-L31C440B380 http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v87168/f2/full/update.zip
updatedatafull http://update.hicloud.com:8180/TDS/...-L11_ee_gb/update_data_full_VNS-L11_ee_gb.zip
VNS-L31C440B160
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v98030/f1/full/update.zip
If, you are looking to get,
* your bootloader code,
* to install TWRP for MM,
* to install or change your oeminfo.
this toolkit can help you.
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
Tried and failed through FF & proxy, Failed to authenticate installation package.
bananas33 said:
Tried and failed through FF & proxy, Failed to authenticate installation package.
Click to expand...
Click to collapse
Hello.
They are the two files to install with twrp since MM.
Or be in b370 and dload the first file (update.app).
Chisetdel31260 said:
They are the two files to install with twrp since MM.
Or be in b370 and dload the first file (update.app).
Click to expand...
Click to collapse
No TWRP here, all stock - I'm trying to install using Firmware Finder + proxy which worked well for the two parts needed for B160 to B370. It seems there's an additional check going on now giving the authentication error after a successful download and verification.
bananas33 said:
No TWRP here, all stock - I'm trying to install using Firmware Finder + proxy which worked well for the two parts needed for B160 to B370. It seems there's an additional check going on now giving the authentication error after a successful download and verification.
Click to expand...
Click to collapse
OK,
I never found firmware finder server.
I always use twrp.
I am currently, in c432, I will change oeminfo and test it.
Well, I installed it. Interesting, android security June 5 and kernel version June 5, 2017.
I was c432b380.
Downgrade MM (c432b160), I use the toolkit to change oeminfo to c440 and firmware c440b132.
Then, bootloader code, installs TWRP for MM, install update.zip and file datafull.zip, REBOOT.
everything is OK. works correctly.:good:
bananas33 said:
Tried and failed through FF & proxy, Failed to authenticate installation package.
Click to expand...
Click to collapse
Try to remove data of updater application and check again. This solution works for me
Tried clearing data for System Update, same problem Is that what you meant by updater application?
---------- Post added at 09:07 PM ---------- Previous post was at 08:31 PM ----------
If I put the phone into airplane mode the updater complains it has no internet access to authenticate, then fails as before; it really does look like there's another stage to this now.
I suppose I could try a factory reset and redo the FF+proxy approach but I don't think that'll work. Revert to B160 and try going straight to B380? Sounds like too much of a risk for me!
Without capturing the network traffic (or decompiling the updater app perhaps) to find out what it's up to it doesn't look like I'm going to get beyond B370 until someone somewhere else decides I can
Yes, this is that application what I mean. It's strange that system update download 4GB of data - I've got same problem and cleaning data and sending full package from Firmware Finder via proxy fixed problem, system update download just ~300mb.
Wysłane z mojego HUAWEI VNS-L31 przy użyciu Tapatalka
Did you go from B370 to B380? It seems that the updater in B370, for me at least, is phoning home for 'authentication' and being denied. If it's working for you from B370 then I wonder what it's using for the check... IMEI, IP address location lookup... hmm. I might try again via a VPN server in Poland.
Not exactly, I upgrade from B371 to B381.
C440? I've not seen odd numbers for the UK/EE firmware.
This is not important - on Your screenshot is a bug with a big update file and this is why You have error with authentication
Good point, it's double the size showing during a download
Still fails when the size is shown correctly and using a Polish VPN
bananas33 said:
Tried and failed through FF & proxy, Failed to authenticate installation package.
Click to expand...
Click to collapse
Same thing happens to me :/
I can't go from b370 to b380...
Anyone knows what is the difference between b370 and b380 and are there valuable reasons to keep trying to update our just stick with the b370?
If nothing else I believe it has a more recent Android security patch level. It looks like either the MM updater doesn't do the authentication check which is failing, or it does but b380 hasn't been cleared wherever that check looks. The only way I can see to check the first is to roll back to MM and try going straight to b380. Otherwise we're waiting on the authentication being given to b380.
bananas33 said:
If nothing else I believe it has a more recent Android security patch level. It looks like either the MM updater doesn't do the authentication check which is failing, or it does but b380 hasn't been cleared wherever that check looks. The only way I can see to check the first is to roll back to MM and try going straight to b380. Otherwise we're waiting on the authentication being given to b380.
Click to expand...
Click to collapse
Hello
I have tested b382
I see it looks very good.
Chisetdel31260 said:
Hello
I have tested b382
I see it looks very good.
Click to expand...
Click to collapse
I'm sure it's delicious, but will it install using FF+proxy or is a flash from custom recovery the only option? I'll give it a go later...
bananas33 said:
I'm sure it's delicious, but will it install using FF+proxy or is a flash from custom recovery the only option? I'll give it a go later...
Click to expand...
Click to collapse
Yes just MM, bootloader, Chinese twrp.
Sorry, I do not know how to do otherwise.
Firmware finder server I never succeeded.
Straight to the point, has anyone successfully updated to B382?
I've tried via FirmwareFinder, it downloads successfully, but during install it says Unauthorised, removes files, and remains the same.
Trying via the dload/sdcard method, and it gives an error @ 5%, and then prompts to reboot the phone.
Have tried going from B190/202/362/370 but no luck each time. Tried with bootloader unlocked & locked, have since done a factory reset once on 370, and still no progress.
Will remain on B370 for now, B382 appears to only be a security patch, but it would be nice to have the peace of mind being on the latest (for Huawei anyway) patch.
CAN YOU GIVE ME LINK FOR b370 ? I HAVED TO TRY WITH FIRMWARE FINDER BUT NOT WORKING, THANK YOU. and i have a same problem when update B382, i think it's a beta version .
midouban87 said:
CAN YOU GIVE ME LINK FOR b370 ? I HAVED TO TRY WITH FIRMWARE FINDER BUT NOT WORKING, THANK YOU. and i have a same problem when update B382, i think it's a beta version .
Click to expand...
Click to collapse
I actually used Firmware Finder to update to B370. Although initially I was having issues getting to that as well, from B362 both via dload & FF.
Ended up rolling back to B190 (via dload), then using FF went to 362 > 370.
Here's the LINK to the update.zip anyway.
djyoshii said:
I actually used Firmware Finder to update to B370. Although initially I was having issues getting to that as well, from B362 both via dload & FF.
Ended up rolling back to B190 (via dload), then using FF went to 362 > 370.
Here's the LINK to the update.zip anyway.
Click to expand...
Click to collapse
i'll try now, but if i use FF to update B370, i try 3 version B370, but i see only download file =5.78mb, then it downloading and fail to update , thank you !
midouban87 said:
CAN YOU GIVE ME LINK FOR b370 ? I HAVED TO TRY WITH FIRMWARE FINDER BUT NOT WORKING, THANK YOU. and i have a same problem when update B382, i think it's a beta version .
Click to expand...
Click to collapse
midouban87 said:
i'll try now, but if i use FF to update B370, i try 3 version B370, but i see only download file =5.78mb, then it downloading and fail to update , thank you !
Click to expand...
Click to collapse
Check one of the other threads in here on how to update via FF, step by step.
You need to go back out and check for updates again. Full size is def not 5mb.
In order to update to B382 NOW, you need to unlock your bootloader and use TWRP to update it UNLESS you wait till it official launch.
djyoshii said:
Check one of the other threads in here on how to update via FF, step by step.
You need to go back out and check for updates again. Full size is def not 5mb.
Click to expand...
Click to collapse
thanks for help, but i have to try manytime , it's alway show 5.78mb. and i know it fail. i try dload method but still fail to verify at 5%.
jhleo1 said:
In order to update to B382 NOW, you need to unlock your bootloader and use TWRP to update it UNLESS you wait till it official launch.
Click to expand...
Click to collapse
Bootloader unlocked.
update.zip for B382 downloaded.
Is it as simple as flashing that zip in TWRP?
Anything else required? Anything to be aware of?
As mentioned above, I've only updated via dload & FF previously, was not aware of any other method/s.
Thanks
I didn't not tried since bit troublesome for me to backup all data etc. I rather wait for final release. You may try to google this firmware and TWRP method was highlighted. Anyway do it at your own risk.
djyoshii said:
Bootloader unlocked.
update.zip for B382 downloaded.
Is it as simple as flashing that zip in TWRP?
Anything else required? Anything to be aware of?
As mentioned above, I've only updated via dload & FF previously, was not aware of any other method/s.
Thanks
Click to expand...
Click to collapse
b382 is still unofficial, if u insist on installing it try this method:
https://forum.xda-developers.com/p9-plus/how-to/easy-upgrade-to-unapproved-emui-5-update-t3649532
The firmware already approved by Huawei. Just use FF to update will do.
wizix said:
b382 is still unofficial, if u insist on installing it try this method:
https://forum.xda-developers.com/p9-plus/how-to/easy-upgrade-to-unapproved-emui-5-update-t3649532
Click to expand...
Click to collapse
I just want to confirm i have the latest building number. I have a European model using it in Canada so maybe the updates arent pushing to the phone? Im currently on VTR-L29C636B120
Last for your model and market version is 162
http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=vtr-L29C636&firmware_page=0
I have stock VTR-L29 model, BL locked and b151 is the latest for me.
It lools like we need to wait for some time until new update is available through OTA
For anyone looking to update to L09C432B162 the latest on Firmware Finder, I can confirm I just did it and updated with no problems via proxy. I choose the FullOTA-MF version.
The responsiveness and transition between screens is so much faster than my previous version (B113) that I would recommend everyone to make the jump if you can.
boonkoh said:
For anyone looking to update to L09C432B162 the latest on Firmware Finder, I can confirm I just did it and updated with no problems via proxy. I choose the FullOTA-MF version.
The responsiveness and transition between screens is so much faster than my previous version (B113) that I would recommend everyone to make the jump if you can.
Click to expand...
Click to collapse
Is the system always the same?
Rom in memory, recovery mode and flash?
Thank's
Kautuak said:
Is the system always the same?
Rom in memory, recovery mode and flash?
Thank's
Click to expand...
Click to collapse
Sorry, I don't understand your question - can you explain?
boonkoh said:
Sorry, I don't understand your question - can you explain?
Click to expand...
Click to collapse
To install it is like any rom?
Copy in memory, go to recovery and install it?
Thank you
Kautuak said:
To install it is like any rom?
Copy in memory, go to recovery and install it?
Thank you
Click to expand...
Click to collapse
No, if you use Firmware Finder app (download from Google Play store), you can use the official update functionality in your phone settings to get the update.
It tricks Huawei servers that your phone is ready for upgrade to this firmware version. So you are downloading the official firmware file from Huawei, and it should install like a normal OTA update. No data loss, no settings loss.
boonkoh said:
No, if you use Firmware Finder app (download from Google Play store), you can use the official update functionality in your phone settings to get the update.
It tricks Huawei servers that your phone is ready for upgrade to this firmware version. So you are downloading the official firmware file from Huawei, and it should install like a normal OTA update. No data loss, no settings loss.
Click to expand...
Click to collapse
Yes but you must use Proxy method. This ist the only was it Works for me .Another Thing is, IT will only Works when Firmware Finder dass that this Update is approved for installation
Sent from my VTR-L09 using XDA Free mobile app
Question: Is there a way to downgrade from latest update to the previous one without root? I'm on a mobile data plan with my network and rooting the phone will compromise my warranty if in case anything goes wrong.
I recently saw a vtr-l29c432b171 OTA update but couldn't find it anymore or any link online.
Cybernerd said:
I recently saw a vtr-l29c432b171 OTA update but couldn't find it anymore or any link online.
Click to expand...
Click to collapse
vtr-l29c432b171
I got the update manually trough here: CZECH HUAWEI FAN FORUM
DallasCZ said:
vtr-l29c432b171
I got the update manually trough here: CZECH HUAWEI FAN FORUM
Click to expand...
Click to collapse
@DallasCZ could you share the link(s) here please. I could only find VTR-L29C432B164 on the page. Thanks in advance!
Cybernerd said:
@DallasCZ could you share the link(s) here please. I could only find VTR-L29C432B164 on the page. Thanks in advance!
Click to expand...
Click to collapse
sorry my fault..i updated to 164 with the full firmware package from the site i mentioned, andf then after first boot i got OTA to 171.
When updating using Firmware Finder FullOTA (in-app proxy), do you need to be fully unrooted (stock kernel and recovery) for this to work?
Asking, because I plan to try this update method from B165 to B172 on my VTR-L29C185 and wondering if this process keeps the user data intact or it means a full reset later regardless ... can anyone confirm user data can be preserved with in-app proxy method? Does the BootLoader stay unlocked too?
EDIT:
all went well as per update itself via in-app proxy detection method ... however had to use FullOTA package to successfully install it and that I think re-locked the bootloader, oh well, at least it worked fine
vassil_bk said:
Exactly the same for me - VTR-L29C432B151 shows as the latest one.
I also found this firmware collection. Not sure how accurate is though...
Click to expand...
Click to collapse
i have vtr-l29c432b171 got it from system update
knudsen81 said:
i have vtr-l29c432b171 got it from system update
Click to expand...
Click to collapse
for L09C432 is the latest B201, for L29C432171 according this site pro-teammt.ru.
But hte update is rolled out on very strange key...some countries have it, some operators don´t .... don´t know. So i always download the latest for my phone L29C432 and flash it trough HWOTA.
fenixus said:
When updating using Firmware Finder FullOTA (in-app proxy), do you need to be fully unrooted (stock kernel and recovery) for this to work?
Asking, because I plan to try this update method from B165 to B172 on my VTR-L29C185 and wondering if this process keeps the user data intact or it means a full reset later regardless ... can anyone confirm user data can be preserved with in-app proxy method? Does the BootLoader stay unlocked too?
EDIT:
all went well as per update itself via in-app proxy detection method ... however had to use FullOTA package to successfully install it and that I think re-locked the bootloader, oh well, at least it worked fine
Click to expand...
Click to collapse
Hello. I need your help. I did a rebranding from C185 to C432. forgot to make a copy of the oem info for C185. if you have it can you share with me? Thank you
OEMINFO Collections for P10 & P10 Plus
https://forum.xda-developers.com/p10/development/oeminfo-collections-p10-p10-plus-t3696422
Hello, i have (P10) Bulid number: VTR-L29C490B114
Is there anything newer the this one?
thank you
Hello I have a P9 EVA-L09C636B134. I live in the US.
EMUI 4.1
Android 6.0
Phone works ok, it feels slow at times. A reboot usually fixes it for a day.
I have my FIRST EVER UPDATE from the updater (B168). Should I do it? It says there are 2 patches: first one is entirely in chinese, the second one says a few things like add watermarks, fix UI issue, optimize startup, etc.
Yes. Why are you still on marshmallow? Nougat has been available since last year.
Twisted Prime said:
Yes. Why are you still on marshmallow? Nougat has been available since last year.
Click to expand...
Click to collapse
I read that the update made their phones use more battery or something. Also I don't know how to manually update, I assumed it would hit this updater thing but I never got an update off the updater. No risk to update you think? I should just do it?
jibbbyy said:
I read that the update made their phones use more battery or something. Also I don't know how to manually update, I assumed it would hit this updater thing but I never got an update off the updater. No risk to update you think? I should just do it?
Click to expand...
Click to collapse
Im on latest firmware and I get 5-6 hours sot, emui 5 performs much better and you can use greenify for better battery life. I think you should update because we are getting emui 8 soon which has machine learning and provides better performance and battery.
Twisted Prime said:
Im on latest firmware and I get 5-6 hours sot, emui 5 performs much better and you can use greenify for better battery life. I think you should update because we are getting emui 8 soon which has machine learning and provides better performance and battery.
Click to expand...
Click to collapse
Ok updated! I don't notice anything different. I am still at EMUI 4.1 and Android 6.0. Should I update these? How do I do it? I am interested in risk free updates. Thanks!
jibbbyy said:
Ok updated! I don't notice anything different. I am still at EMUI 4.1 and Android 6.0. Should I update these? How do I do it? I am interested in risk free updates. Thanks!
Click to expand...
Click to collapse
There should be 2 more OTA updates to get to nougat. Didn't you get them in the built in updater? if not use firmware finder.
Twisted Prime said:
There should be 2 more OTA updates to get to nougat. Didn't you get them in the built in updater? if not use firmware finder.
Click to expand...
Click to collapse
Thanks, but I don't know what OTA is or what firmware finder is.
jibbbyy said:
Thanks, but I don't know what OTA is or what firmware finder is.
Click to expand...
Click to collapse
OTA = Over the Air. Official update delivered by Huawei. Go to Settings > System Update and check for updates.
FirmwareFinder = App to show/browse/download available and future firmware updates on Huaweis servers. Only necessary for those who flash updates manually.
In your case go to System Update. There should be an update. Maybe you have to do this a couple of times to reach latest Nougat-Version. Good luck!
Jan Philipp said:
OTA = Over the Air. Official update delivered by Huawei. Go to Settings > System Update and check for updates.
FirmwareFinder = App to show/browse/download available and future firmware updates on Huaweis servers. Only necessary for those who flash updates manually.
In your case go to System Update. There should be an update. Maybe you have to do this a couple of times to reach latest Nougat-Version. Good luck!
Click to expand...
Click to collapse
Yea so Like I said this update was the first that ever showed up in the "updater"... And there are no more. I always thought its cuz I live in the US but idk
Twisted Prime said:
There should be 2 more OTA updates to get to nougat. Didn't you get them in the built in updater? if not use firmware finder.
Click to expand...
Click to collapse
Hello,
I have firmware finder. Can you tell me how to properly update my phone using this? I have never used it and only received one OTA update EVER on my phone.
jibbbyy said:
Hello,
I have firmware finder. Can you tell me how to properly update my phone using this? I have never used it and only received one OTA update EVER on my phone.
Click to expand...
Click to collapse
1. Set proxy settings on your wifi: (Server: localhost Port: 8080)
2. Search your model number
3. Select an update package (FullOTA-MF recommended) (FullOTA-MF-PV for android version updates)
4. Select in-app proxy (should get a notification proxy is running)
5. Download the package in system updater
Twisted Prime said:
1. Set proxy settings on your wifi: (Server: localhost Port: 8080)
2. Search your model number
3. Select an update package (FullOTA-MF recommended) (FullOTA-MF-PV for android version updates)
4. Select in-app proxy (should get a notification proxy is running)
5. Download the package in system updater
Click to expand...
Click to collapse
Thank you. Perhaps I did something wrong.
1) set proxy to "localhost" and port "8080"
2) my model number was there, clicked it
3) went back to check settings: settings are (show packages for current region OFF, in app proxy port 8080, use simple OFF, show only fullOTA ON)
4) clicked first package (full OTA - MF)
5) clicked in app proxy
6) go to "updater" in settings
7) updater has package, click download and install
8) error "package checksum error." (immediately, before 1% downloaded).
Is it possible I need to not update the most recent one? I am still on android 6.0, EMUI 4.1 and like I said never had any other update OTA before (never used firmware finder). Thank you!
edit: restarted the phone, the package is now gone. Maybe I should do a different package, maybe an older one, not the most recent one?
jibbbyy said:
Thank you. Perhaps I did something wrong.
1) set proxy to "localhost" and port "8080"
2) my model number was there, clicked it
3) went back to check settings: settings are (show packages for current region OFF, in app proxy port 8080, use simple OFF, show only fullOTA ON)
4) clicked first package (full OTA - MF)
5) clicked in app proxy
6) go to "updater" in settings
7) updater has package, click download and install
8) error "package checksum error." (immediately, before 1% downloaded).
Is it possible I need to not update the most recent one? I am still on android 6.0, EMUI 4.1 and like I said never had any other update OTA before (never used firmware finder). Thank you!
edit: restarted the phone, the package is now gone. Maybe I should do a different package, maybe an older one, not the most recent one?
Click to expand...
Click to collapse
Try the next build number up from your current one, one by one. When you get to the last marshmallow build, install the PV package to get to nougat.
Twisted Prime said:
Try the next build number up from your current one, one by one. When you get to the last marshmallow build, install the PV package to get to nougat.
Click to expand...
Click to collapse
Ok thanks, I am trying the oldest build B361 from B168. The download started.
There are 19 total packages, 14 before the first VD package. Holy **** this is going to take forever!
Thank you very much for your help.
Can you explain why these dont come automatically, why I need to do this manual process? Is it because I am in the US?
Also why do I need this proxy port thing?
Thanks again!
jibbbyy said:
Ok thanks, I am trying the oldest build B361 from B168. The download started.
There are 19 total packages, 14 before the first VD package. Holy **** this is going to take forever!
Thank you very much for your help.
Can you explain why these dont come automatically, why I need to do this manual process? Is it because I am in the US?
Also why do I need this proxy port thing?
Thanks again!
Click to expand...
Click to collapse
You just need the proxy so the package goes to your updater. You can set it back to default after.
What model number do you have?
Twisted Prime said:
You just need the proxy so the package goes to your updater. You can set it back to default after.
What model number do you have?
Click to expand...
Click to collapse
I have a L09C636!
jibbbyy said:
I have a L09C636!
Click to expand...
Click to collapse
You should Just need to install b193 (FullOTA) > b394 (PV) and your on nougat
Twisted Prime said:
You should Just need to install b193 (FullOTA) > b394 (PV) and your on nougat
Click to expand...
Click to collapse
There is no option for B193. all of the packages are in the 300's.
The download finished (I think) but it could not install. It said I needed to free up some space. I uninstalled some apps and now it will not let me view the progress (I clicked new custom version, it just takes me back to my setting page). in my notification screen, it as EMU download percetnage at -930% and it is not moving. I tried restarting a few times it all stays the same. Current version still says B168.
edit: I clicked menu and then "download latest full package" and it seemed to have reset everything. Should I try this package again? To repeat, this is the oldest package on firmware finder, B361. I also noticed there are duplicates in firmware finder... and some of the packages are for L09,L19 and L29, these are all safe to download? Should I keep doing oldest 1 by 1?
Thanks again for your help, sorry I am so noob.
jibbbyy said:
There is no option for B193. all of the packages are in the 300's.
The download finished (I think) but it could not install. It said I needed to free up some space. I uninstalled some apps and now it will not let me view the progress (I clicked new custom version, it just takes me back to my setting page). in my notification screen, it as EMU download percetnage at -930% and it is not moving. I tried restarting a few times it all stays the same. Current version still says B168.
edit: I clicked menu and then "download latest full package" and it seemed to have reset everything. Should I try this package again? To repeat, this is the oldest package on firmware finder, B361. I also noticed there are duplicates in firmware finder... and some of the packages are for L09,L19 and L29, these are all safe to download? Should I keep doing oldest 1 by 1?
Thanks again for your help, sorry I am so noob.
Click to expand...
Click to collapse
Just try any PV package.
Only download those for LO9C636
Try this one:
Twisted Prime said:
Just try any PV package.
Only download those for LO9C636
Click to expand...
Click to collapse
There are two PV packages and they look like this
https://imgur.com/a/6VzOgZf
it says all 3 models but when you click on it it says L19 for both...