Im using Honor 8 Pro
Plz join in our group we can discuss over there
https://t.me/joinchat/G2i160nl5GwMECHUc2ZeyQ
Except lil issue (minor) everything working
Here is the link
Gdrive-. https://drive.google.com/file/d/1-LVwRb0JaXZMFFo-Jgg2_7VsUdMGzVFW/view?usp=drivesdk
Twrp 3.2.3 for honor 8 pro
https://drive.google.com/file/d/1FMpC7z1zRfVJK3X-1bUga91Jgt8Vlgui/view?usp=drivesdk
why you cannot name your "twrp.img" with a descriptive name? please.
like "twrp_3.2.1.-0_releasedate_(creator/modder)"
thx.
---
bugreport:
- do not boot, stuck at the twrp-start-screen
000001a said:
why you cannot name your "twrp.img" with a descriptive name? please.
like "twrp_3.2.1.-0_releasedate_(creator/modder)"
thx.
---
bugreport:
- do not boot, stuck at the twrp-start-screen
Click to expand...
Click to collapse
Honor 8 pro?
naveen00781 said:
Honor 8 pro?
Click to expand...
Click to collapse
It will take some time for 1st boot into twrp like 1min
Honor 8 Pro - DUK-L09(C432)
I waited much longer than 1min... , sry.
000001a said:
Honor 8 Pro - DUK-L09(C432)
I waited much longer than 1min... , sry.
Click to expand...
Click to collapse
Mine C675
naveen00781 said:
Only working for me.
So closed
Click to expand...
Click to collapse
Can you share the twrp, I am using Indian Honor 8 pro (C675).
psbhullar said:
Can you share the twrp, I am using Indian Honor 8 pro (C675).
Click to expand...
Click to collapse
https://t.me/joinchat/G2i160nl5GwMECHUc2ZeyQ
Join here if need further info
naveen00781 said:
https://t.me/joinchat/G2i160nl5GwMECHUc2ZeyQ
Join here if need further info
Click to expand...
Click to collapse
Though it is working ok, wanted to know if it was compiled with specifics to Honor 8 Pro.
why you cannot talk here?
why a closed group on telegram?
telegram do not work via webbrowser, this is not good.
@ all the guys here. i also would be interested in a fully working twrp. not having telegram it would be nice to read some news at this forum.
000001a said:
why you cannot talk here?
why a closed group on telegram?
telegram do not work via webbrowser, this is not good.
Click to expand...
Click to collapse
Twrp link
https://drive.google.com/file/d/1-LVwRb0JaXZMFFo-Jgg2_7VsUdMGzVFW/view?usp=drivesdk
kurvenmeister said:
@ all the guys here. i also would be interested in a fully working twrp. not having telegram it would be nice to read some news at this forum.
Click to expand...
Click to collapse
Twrp honor8pro
https://drive.google.com/file/d/1-LVwRb0JaXZMFFo-Jgg2_7VsUdMGzVFW/view?usp=drivesdk
naveen00781 said:
Twrp honor8pro
https://drive.google.com/file/d/1-LVwRb0JaXZMFFo-Jgg2_7VsUdMGzVFW/view?usp=drivesdk
Click to expand...
Click to collapse
Plz let me know is it working for you or not.
It's fully working for me except reboot option. Need to manually switch on ur phone
did you compile it by yourself? did not try yet
my device DUK-L09(C432)
your version (2018-10-04) is more useful, than the other twrp-roms which i tested.
- MTP works (yay)
- can read decrypted data
- can flash images (recovery)
errors:
('/system' is stock, '/data' is decrypted, saving to internal storage)
failed to unmount '/system' (device or resource busy)
E:unable to load '/twres/languages/de.xml'
testing backup:
backing up data (excl. storage)
createTarFork() process endet with ERROR: 255
Backup failed. cleaning backup folder
(failed backup folder was not cleaned..., 'folder' & 'data' are still there)
testing restore:
failed to unmount '/system' (device or resource busy)
something went wrong,
now i stuck on the loading screen...
i will try a '/data' wipe
somehow it will not boot on custom roms (lineage & ResurrectionRemix on OpenKirin.net)
i give up.
do not work, there is a issuge with '/system' & custom roms
sad
p.s.
it cannot boot on empty '/system'
34/5000
this dependence on '/system' should not be
the only recovery that full works on my device is:
TWRP 3.0.3-1 [Magisk] , but MTP do not work... this sux, too.
000001a said:
my device DUK-L09(C432)
your version (2018-10-04) is more useful, than the other twrp-roms which i tested.
- MTP works (yay)
- can read decrypted data
- can flash images (recovery)
errors:
('/system' is stock, '/data' is decrypted, saving to internal storage)
failed to unmount '/system' (device or resource busy)
E:unable to load '/twres/languages/de.xml'
testing backup:
backing up data (excl. storage)
createTarFork() process endet with ERROR: 255
Backup failed. cleaning backup folder
(failed backup folder was not cleaned..., 'folder' & 'data' are still there)
testing restore:
failed to unmount '/system' (device or resource busy)
something went wrong,
now i stuck on the loading screen...
i will try a '/data' wipe
somehow it will not boot on custom roms (lineage & ResurrectionRemix on OpenKirin.net)
i give up.
do not work, there is a issuge with '/system' & custom roms
sad
p.s.
it cannot boot on empty '/system'
34/5000
this dependence on '/system' should not be
the only recovery that full works on my device is:
TWRP 3.0.3-1 [Magisk] , but MTP do not work... this sux, too.
Click to expand...
Click to collapse
Sorry forgot to mention that system won't unmount its not a problem.
Now for flashing rom Actually system partition mentioned as system image it works for me perfectly.
Backup also works n i can restore as well.
I have flashed all most every GSI custom rom and never wiped system or data because never faced any issues at all.
Thanks
I'm short for throwing the thing against the wall...
aaaahhh...
maybe I should send it to developer, so he discovered the subtle differences...
Latest twrp uploaded twrp3.2.3
Check 2nd msg
Related
Hello,
So I want to flash the OB9 version of OxygenOS.
I downloaded the full ROM at "downloads.oneplus.com", but when I try to flash it, it's stuck at "Patching system image unconditionally..."
The progress bar is filled entirely.
Here are the logs provided by TWRP :
Data successfully decrypted, new block device '/dev/block/dm-0'
Updating partition details...
...done
Successfully decrypted with default password.
Updating partition details...
...done
Full SELinux support is present.
MTP Enabled
Installing zip file '/sdcard/opb9/OnePlus3TOxygen_28_OTA_026_all_1706141311_58c452644a3b471e.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Patching system image unconditionally...
I don't know what to do... reboot? ...wait?
Edit : Tried restarting, did a factory reset, tried installing again, same issue.
Edit 2 : I just tried the same thing with Stable 4.1.6 : Factory Reset, Flash ZIP, same issue but this time the progress bar isn't entirely filled, i'd say it's at 95%
RazenIW said:
Hello,
So I want to flash the OB9 version of OxygenOS.
I downloaded the full ROM at "downloads.oneplus.com", but when I try to flash it, it's stuck at "Patching system image unconditionally..."
The progress bar is filled entirely.
Here are the logs provided by TWRP :
Data successfully decrypted, new block device '/dev/block/dm-0'
Updating partition details...
...done
Successfully decrypted with default password.
Updating partition details...
...done
Full SELinux support is present.
MTP Enabled
Installing zip file '/sdcard/opb9/OnePlus3TOxygen_28_OTA_026_all_1706141311_58c452644a3b471e.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Patching system image unconditionally...
I don't know what to do... reboot? ...wait?
Edit : Tried restarting, did a factory reset, tried installing again, same issue.
Edit 2 : I just tried the same thing with Stable 4.1.6 : Factory Reset, Flash ZIP, same issue but this time the progress bar isn't entirely filled, i'd say it's at 95%
Click to expand...
Click to collapse
Same issue here.. I've just unchek system in twrp>advance>mount and finally flashed succesfully...:good:
I had a similae issue with 4.1.6 while clean flashing it. Downloaded the right package from direct server on Oneplus' site and it works.
nagi_007pk said:
I had a similae issue with 4.1.6 while clean flashing it. Downloaded the right package from direct server on Oneplus' site and it works.
Click to expand...
Click to collapse
What do you mean by "The right package"?
Is it just the full official rom from oneplus.net?
Cuz this is also what i'm doing and it doesn't work
mukesh22584 said:
Same issue here.. I've just unchek system in twrp>advance>mount and finally flashed succesfully...:good:
Click to expand...
Click to collapse
"System" is already unchecked here :/
RazenIW said:
"System" is already unchecked here :/
Click to expand...
Click to collapse
What version of twrp are you using?
sakumaxp said:
What version of twrp are you using?
Click to expand...
Click to collapse
3.0
RazenIW said:
3.0
Click to expand...
Click to collapse
Try the Blu spark twrp
sakumaxp said:
Try the Blu spark twrp
Click to expand...
Click to collapse
I can't find it, do you have the link?
RazenIW said:
I can't find it, do you have the link?
Click to expand...
Click to collapse
https://forum.xda-developers.com/devdb/project/dl/?id=25294
I just tried with the latest 3.1.1-2, and it didn't work.
I'll try to install blu spark TWRP now
sakumaxp said:
https://forum.xda-developers.com/devdb/project/dl/?id=25294
Click to expand...
Click to collapse
Same issue with blu spark TWRP
I'll try to flash the stock recovery and report back
RazenIW said:
Same issue with blu spark TWRP
I'll try to flash the stock recovery and report back
Click to expand...
Click to collapse
Try to re-download the full zip file again and check with it.
Sent from my ONEPLUS A3003 using XDA Labs
Sun90 said:
Try to re-download the full zip file again and check with it.
Sent from my ONEPLUS A3003 using XDA Labs
Click to expand...
Click to collapse
It didn't work for both OTA 4.1.6 and OpenBeta 9 so i doubt this is caused by them being corrupted
Thx for the help tho
Issue is solved, flashed the rom via sideload successfully.
System image or a partition stuck when restoring
RazenIW said:
Hello,
So I want to flash the OB9 version of OxygenOS.
I downloaded the full ROM at "downloads.oneplus.com", but when I try to flash it, it's stuck at "Patching system image unconditionally..."
The progress bar is filled entirely.
Here are the logs provided by TWRP :
Data successfully decrypted, new block device '/dev/block/dm-0'
Updating partition details...
...done
Successfully decrypted with default password.
Updating partition details...
...done
Full SELinux support is present.
MTP Enabled
Installing zip file '/sdcard/opb9/OnePlus3TOxygen_28_OTA_026_all_1706141311_58c452644a3b471e.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Patching system image unconditionally...
I don't know what to do... reboot? ...wait?
Edit : Tried restarting, did a factory reset, tried installing again, same issue.
Edit 2 : I just tried the same thing with Stable 4.1.6 : Factory Reset, Flash ZIP, same issue but this time the progress bar isn't entirely filled, i'd say it's at 95%
Click to expand...
Click to collapse
This is what I did. After sentenforce=0 and chmod755 and also changing file system to fat then back to ext4, I went to restore only system image partition and was successful. Then I restored the rest omitting system image partition and was successful.
Hi, I have a Huawei p9 Plus VIE-L29.
I am not able to flash any custom roms or the stock roms.
Im still able to gain access to TWRP Recovery.
BUT, whenever i tried to flash a firmware or rom.
The log shows this,
Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Error installing zip file'/usbotg/
P9PlusFirmwareAndroid6.0.zip'
Updating partition details...
Failed to mount '/data' (Invalid Argument)
Failed to mount '/system' (Operation not supported on transport endpoint)
...done
Really hope someone can help me out! Much is appreciated!
I think you installed wrong version of twrp.
If you have nougat, you must flash twrp for nougat but if you have marshmallow you must flash twrp for MM
mmmm.... TWRP web site only have 3 versions there for p9 plus.. I think 3.0.2 above support Nougat?
https://dl.twrp.me/vienna/
hkan008 said:
mmmm.... TWRP web site only have 3 versions there for p9 plus.. I think 3.0.2 above support Nougat?
https://dl.twrp.me/vienna/
Click to expand...
Click to collapse
https://forum.xda-developers.com/p9-plus/development/recovery-twrp-t3388330
this support MM
https://forum.xda-developers.com/showpost.php?p=71470328&postcount=6
and this recovery support N
Updated TWRP for the Z5 Compact
REQUIRES:
- Unlocked bootloader
- Have Fastboot drivers installed on the PC you use for flashing
FEATURES:
- MTP support
- ADB root
- Reboot to Bootloader
- SD Card access
Not working (for now):
- Decryption <- working on it when I have time
Changelog:
23.02.2018
- Backup/Restore fix for USB OTG
- small fstab tuning (thanks @GreyLeshy)
- DL link updated - Now you will have access to all builds inside GDrive folder
22.02.2018 - 2
- Fix SD Card (again) on latest build
22.02.2018
- USB OTG fixed
15.02.2018
- Possibly fixed decryption, need feedback
13.02.2018
- Fixed SD card
7.02.2018
- First build
DOWNLOAD LINK
Google Drive
Instructions:
- Connect phone to PC in Fastboot mode
- Open Command Prompt and type
Code:
fastboot flash recovery recovery-name.img
- Take off the cable and boot into recovery by holding Power + Vol Down until you feel a vibration
Disclaimer: I am merely distributing the ready image. I will do my best to keep this thread up-to-date with the latest TWRP releases and provide fixed images in case there is a bug, I can help you to solve some problems but do not expect any timeframe.
I am not responsible for any bricked phones, missed alarms or thunderstorms. What you do with your phone is your own choice. Happy flashing!
Credits:
@TwrpBuilder for making this, all credits go to them
and all other maintainers and contributors to the code
trax7 said:
Needs testing:
- Decryption
Click to expand...
Click to collapse
Decryption is not working
Good job anyway, we have an updated TWRP at least!!
Don't need decryption and everything else works fine!! Strange how md5 checksum is now Digest!! Must be an Oreo thing
Sent from my Sony Xperia Z5 Compact using XDA Labs
@trax7
I own a Zuk Z2, on it the decryption problem was caused by unaligned/updated vendor blobs. I hope this can give you an hint on how to fix decryption.
Doe.it said:
Decryption is not working
Good job anyway, we have an updated TWRP at least!!
Click to expand...
Click to collapse
You tried with a password? Try with factory reset (not wipe data) and it should work... Note that you will lose data so be sure to copy it somewhere first.
trax7 said:
You tried with a password? Try with factory reset (not wipe data) and it should work... Note that you will lose data so be sure to copy it somewhere first.
Click to expand...
Click to collapse
I am encrypted everyday on my phone (I have set a password), I am using latest official stock firmware, decryption doesn't work returning a "failed decryption" message.
Thank you!
Hello trax7,
first of all ... many, many, many thanks for the provision of a current TWRP !!!!!
I searched for it so long !!!
Not working (for now):
- Decryption
- You tell me
Click to expand...
Click to collapse
For the moment I found three things for need of improvement:
1. When going into Recovery, the purple lamp (at the top of the case) does not light up.
2. Double touch the screen, doesn't wake up / switch on the screen again.
3. When starting a backup, I get five error messages:
unable to locate /persistent partition for backup calculations,
unable to locate /misc partition for backup calculation,
unable to locate /firmware partition for backup calculation,
unable to locate /persist partition for backup calculation,
unable to locate /ta partition for backup calculation,... but the backup of the five partitions "boot, cache, data, recovery and system" runs through error-free.
However - I'm glad that we have became a current TWRP for our device!
And if one day the decryption works, I will be happy!
rm43115 said:
Hello trax7,
first of all ... many, many, many thanks for the provision of a current TWRP !!!!!
I searched for it so long !!!
For the moment I found three things for need of improvement:
1. When going into Recovery, the purple lamp (at the top of the case) does not light up.
2. Double touch the screen, doesn't wake up / switch on the screen again.
3. When starting a backup, I get five error messages:
unable to locate /persistent partition for backup calculations,
unable to locate /misc partition for backup calculation,
unable to locate /firmware partition for backup calculation,
unable to locate /persist partition for backup calculation,
unable to locate /ta partition for backup calculation,... but the backup of the five partitions "boot, cache, data, recovery and system" runs through error-free.
However - I'm glad that we have became a current TWRP for our device!
And if one day the decryption works, I will be happy!
Click to expand...
Click to collapse
That's weird... I haven't experienced any of those bugs Maaybe just the purple lamp but I haven't even paid attention to that lol
Edit: Yes, purple LED does not light up. However the recovery did not complain at all during backups and locking and unlocking the screen is just fine. Are you using E5823 or E5803?
What about encrypted data partition. Is it possible to fix decrypting?
jw96 said:
What about encrypted data partition. Is it possible to fix decrypting?
Click to expand...
Click to collapse
At the moment no, but you can try and test whether it picks it up after a factory reset... Backup ur data tho.
trax7 said:
That's weird... I haven't experienced any of those bugs Maaybe just the purple lamp but I haven't even paid attention to that lol
Edit: Yes, purple LED does not light up. However the recovery did not complain at all during backups and locking and unlocking the screen is just fine. Are you using E5823 or E5803?
Click to expand...
Click to collapse
Ha, last night I found the problem for the strange error messages during the backup (it's not a problem of your TWRP-version):
In the .TWRPS file these partitions (persist, persistent, misc, firmware, ta) are still registered for backup from the old TWRP-version I used before.
I just had deleted the .TWRPS file and have created it again ... AND ... ERROR GONE!
I use E5823, but I would not call the problems with the violet lamp and the double-touch-unlock-screen an error ... rather a nice-to-have feature.
I mean, do not waste time with these banalities, if you do not know the solution.
USB OTG storage support
Hello trax7,
at the coming weekend I want to test the decryption of the TWRP - during preparation I realize that "USB OTG storage support" is missing.
Is it possible to implement "USB OTG storage support"?
rm43115 said:
Is it possible to implement "USB OTG storage support"?
Click to expand...
Click to collapse
@Trax , add to fstab
Code:
/usb-otg auto /dev/block/sda1 /dev/block/sda
Doe.it said:
Decryption is not working
Good job anyway, we have an updated TWRP at least!!
Click to expand...
Click to collapse
Doe.it said:
I am encrypted everyday on my phone (I have set a password), I am using latest official stock firmware, decryption doesn't work returning a "failed decryption" message.
Click to expand...
Click to collapse
jw96 said:
What about encrypted data partition. Is it possible to fix decrypting?
Click to expand...
Click to collapse
Decryption can't be achieved by only password. It requires a factory reset (not wipe data!). This is a security measure and each Android device creates their own password for encrypted data partition. So any other passwords such as lock screen security pin won't work. All ways go to performing a factory reset. In addition, in order not to have encrypted data partition again, fstab inside boot image must be modified.
rm43115 said:
Hello trax7,
at the coming weekend I want to test the decryption of the TWRP - during preparation I realize that "USB OTG storage support" is missing.
Is it possible to implement "USB OTG storage support"?
Click to expand...
Click to collapse
Yes, it is possible. Your device support OTG on it's stock fstab. After we get our works done, we will look onto this too!
Stay tuned!
berkanktz
GreyLeshy said:
@Trax , add to fstab
Code:
/usb-otg auto /dev/block/sda1 /dev/block/sda
Click to expand...
Click to collapse
@GreyLeshy: Can I add it manually?
rm43115 said:
Can I add it manually?
Click to expand...
Click to collapse
Yes, You can with Android Image Kitchen
New build posted, USB OTG fixed as per @GreyLeshy 's suggestion.
trax7 said:
New build posted, USB OTG fixed as per @GreyLeshy 's suggestion.
Click to expand...
Click to collapse
THANK YOU!!!!
Now I can test the decryption this weekend ... if my children let me.
trax7 said:
Changelog:
22.02.2017
-USB OTG fixed
15.02.2017
-Possibly fixed decryption, need feedback
13.02.2017
- Fixed SD card
7.02.2017
- First build
Click to expand...
Click to collapse
You mean 2018 and not 2017.
In the latest two builds SD card access is broken again (or at least I can't access it). Reverting to recovery_suzuran-130218.img SD card access works again.
Unofficial TWRP Upstream for hero2lte
- TWRP 3.3.0-0
- Built on top of latest kernel source and upstreamed to 3.18.138
- Support for Samsung ROMs and can mount data after using them
- Code was cleaned up a lot and it should be more stable.
Credits to Ivan Meler for kernel and device sources and exynos-linux-stable for the upstreaming of linux kernel for our devices.
Instructions:
How to install TWRP recovery.img
1. Boot into an existing TWRP build
2. Download recovery image.
3. Copy TWRP image to your device
3. Click the 'Install' button
4. Click the 'Install Image' button
5. Navigate to where you downloaded the image and click on it
6. Select 'Recovery' partition option from the list, and swipe to confirm flash
7. Reboot back into recovery and you'll be in the updated recovery.
--
How to install Odin recovery.tar
1. Download Odin3 v3.13.1
2. Download Odin flashable
4. Restart your device in to Download mode (by holding Vol- & Home & Power)
5. Connect your device to your computer
6. Click 'AP' and select the .tar image you downloaded
7. Click the 'Start' button to flash the recovery
8. Reboot into recovery (by holding Vol+ & Home & Power) after successful flash.
Downloads:
16-04-19
————-
TWRP recovery.img
Odin recovery.tar
Sources: https://gitlab.com/developerlukeroms/twrp-hero
Thank you! I'm already using Tkkg1994's moded version but I guess you made some updates and improvments on it.
gonna flash it later.
edit: No freezing while changing time zone and language. Working really smooth. I think it's also faster while getting back-up and creating diggest.
Adding it to my signature since many people asking about mount data problems on custom rom threads. Once again thank you for the great work.
is there quota support like tkkg1994-version?
I flashed this version and everything went ok but i only noticed that battery level is always lower in twrp but not a big deal,thanks.
dangerhouse said:
is there quota support like tkkg1994-version?
Click to expand...
Click to collapse
Yep
Can I use it while having an android pie rom?(confused after reading the title that says android 8.1)
Champ16 said:
Can I use it while having an android pie rom?(confused after reading the title that says android 8.1)
Click to expand...
Click to collapse
I'm using it on pie port, working great. you can take it as Android 8.1+
Champ16 said:
Can I use it while having an android pie rom?(confused after reading the title that says android 8.1)
Click to expand...
Click to collapse
Yes, android 8.1 means the twrp base, not what rom it works for. it works perfectly on pie roms
huge thank you dude!!
turbolukex5 said:
Unofficial TWRP Upstream for hero2lte
Click to expand...
Click to collapse
Is there a way to make TWRP settings permanent? It reset to default after some time. (It's like that with official one too) also anychance to have it without Official TWRP app? I uninstall it but after 1st recovery boot it comes back again. Have to keep it disabled.
The settings for twrp saved in internal sdcard... Don't delete the TWRP folder
wurstherpes said:
The settings for twrp saved in internal sdcard... Don't delete the TWRP folder
Click to expand...
Click to collapse
That really helped Thank you!
rroyy said:
Is there a way to make TWRP settings permanent? It reset to default after some time. (It's like that with official one too) also anychance to have it without Official TWRP app? I uninstall it but after 1st recovery boot it comes back again. Have to keep it disabled.
Click to expand...
Click to collapse
You can't if you wipe internal storage, plus theres an option to uncheck installing twrp app in the recovery.
Is it possible to add f2fs data and cache
Good working ty so much
Nice work
But can it keep data decrypted after I install magisk?
Currently using root with supersu
gupt07ash said:
Nice work
But can it keep data decrypted after I install magisk?
Currently using root with supersu
Click to expand...
Click to collapse
As long as dm-verity is disabled, it will keep decrypted, without this twrp it wouldnt mount to twrp although being decrypted
turbolukex5 said:
As long as dm-verity is disabled, it will keep decrypted, without this twrp it wouldnt mount to twrp although being decrypted
Click to expand...
Click to collapse
This worked like a charm. I can read internal partition over magisk now. But I'm getting an error while making a backup. the recovery says "E: recv error on uevent". this error does not interrupt the backup progress and the backup can still be completed but its an error I keep getting.
gupt07ash said:
This worked like a charm. I can read internal partition over magisk now. But I'm getting an error while making a backup. the recovery says "E: recv error on uevent". this error does not interrupt the backup progress and the backup can still be completed but its an error I keep getting.
Click to expand...
Click to collapse
E: recv error on uevent is harmless message, no need to worry about it.
turbolukex5 said:
E: recv error on uevent is harmless message, no need to worry about it.
Click to expand...
Click to collapse
Bruh if you made this, you're a legend!
I can finally use root hide and make full backups
Thanks :good:
Hi there,
I´m not able to install AospExtended or any other Custom ROM on my Z2 Pro. I spent several days on troubleshooting without any success. TWRP / RedWolf Error 7. Failed to mount /vendor (Invalid argument)
Tried it with different "Factory2vendor" files. all TWRP Version from 3.1 til the latest 3.3.1.0.
I did some rollbacks to ZU 1.9, 2.5 and 3.1 via QFIL.
recvoery.log
Code:
open "/dev/block/bootdevice/by-name/vendor" failed: No such file or directory
script aborted: E2001: Failed to update vendor image.
E2001: Failed to update vendor image.error: 2001
Updater process ended with ERROR: 7
Can anyone help me out of this issue?
Many thanks!
toto1988
EDIT: right now I´m not able to install factory2vendor.zip --> I got the same message: Failed to mount /vendor (Invalid Argument)
Hi there, I never seen this issue nor tried to install that rom (in my todo list).
But have you tried mounting the vendor partition on twrt before running the rom or zip file?
Got the same issue.... Really in need for a fix
Sorry, I don’t speak English, all depends on Google Translate. Please understand if there is any mistake.
1. You should first flash QFIL into 1.9.104
2. Unlock your phone and swipe into TWRP
3. Flash into the full version of zui3.5.388rom
4. Swipe [Android-10][Z2_row] PixysOS to use Android-10
I tried to flash AospExtended ROM V7.0 and it also failed
Sorry, the resource was found in the China Forum, I am not sure if you can access this resource:
[ROM1.9.104]https://club.lenovo.com.cn/thread-1810687-1-1.html
[ROM3.5.388]https://club.lenovo.com.cn/thread-4511179-1-1.html
chzzl said:
Sorry, I don’t speak English, all depends on Google Translate. Please understand if there is any mistake.
1. You should first flash QFIL into 1.9.104
2. Unlock your phone and swipe into TWRP
3. Flash into the full version of zui3.5.388rom
4. Swipe [Android-10][Z2_row] PixysOS to use Android-10
I tried to flash AospExtended ROM V7.0 and it also failed
Sorry, the resource was found in the China Forum, I am not sure if you can access this resource:
[ROM1.9.104]https://club.lenovo.com.cn/thread-1810687-1-1.html
[ROM3.5.388]https://club.lenovo.com.cn/thread-4511179-1-1.html
Click to expand...
Click to collapse
not working....
Do anyone had a fix? Now I have a second Z2 Pro with the same error. I´m not able to Install a Android 9 or 10 based custom ROM.
- post was moved to other thread -