Where can I find general information on Xposed, e.g. how to install it?
In this thread.
Does this require root access?
Yes, because it replaces a file in /system/bin. Once the framework is installed, it should work without root access.
For which devices/ROMs does it work?
I develop the Xposed framework based on the AOSP sources. I'm personally using CM10.2 on an I9100 (Samsung Galaxy S2, bought in Germany). Basically, it should work on any phone which with a ROM based on Android 4.0 or later and an ARM or x86 processor (this is the processor architecture, almost all smart phones and tablets have either of those). Exceptions might be ROMs which are different from the original Android code in some very internal, central code parts (which don't need to be touched for most theming and enhancement modifications). But this is related to the ROM, not the phone itself.
The modules target higher-level code, so they are more likely to be incompatible with your ROM. Basically, the question is whether the methods and resources which the module modifies are similar on your ROM and on the developer's ROM. Let's say a module needs to modify the result of a certain method call. For this, it needs to specify the exact name and parameters that identify that method. If the in your ROM, an additional parameter has been added, the module can't find the method anymore and won't work. If the method can still be found, it will probably work (unless the rest of the app/ROM has changed too much).
There is not definite answer whether it will work. Just try it (of course, making a nandroid backup before is never a bad idea). If it doesn't work, just disable the module. You might want to inform the module developer (not me!) about this fact and provide details (e.g. a logcat and/or the content of /data/data/de.robv.android.xposed.installer/log/debug.log).
What about Gingerbread? Or any other Android version before 4.0.3?
An experimental version for Gingerbread made by liudongmiao can be found here: http://forum.xda-developers.com/xposed/-t2739034.
Note that I cannot give any support for it, please direct your feedback to @liudongmiao.
Are there known incompatibilities?
There seem to be issues with AOKP nightlies. For more details, please read this post.
There seem to be issues (bootloops) with the Oppo Framework, I don't have a fix yet.
On some HTC One phones with CM11, the System UI force crashes. This seems to be caused by SELinux restrictions. Executing "restorecon /system/bin/app_process" (as root, e.g. with adb shell) should help against the FCs, but Xposed might not work due to other SELinux restrictions. If you have the possibility to disable SELinux enforcing mode, you can try that.
If you are an SELinux expert and would like to help, please contact me.
Apart from that, obviously it won't work if the conditions mention above aren't met, e.g. if your phone isn't rooted or it is running on a pre-ICS ROM.
How can I install it?
See the first post. The framework installation needs to be done only once (and on updates), then it can be used for any modules.
Does Xposed get disabled if I flash a new ROM?
Yes, because the file it modifies, /system/bin/app_process, is part of every ROM and will be overwritten when you flash a ROM. However, as long as you don't wipe data, the Xposed Installer app will still be installed, so you can just click on "install/update" again in the Framework section and reboot.
For CyanogenMod-based ROMs, there is an easy solution: [1] and [2]. This will reactivate Xposed automatically after you flash a new ROM/nightly.
For other ROMs, you can try this one. Be careful, it will disable Xposed again if you flash it twice!
Isn't this insecure?
In a way, yes. With great power comes great risk. On the other hand, other ways of modifying your phone are also open to malicious coding. For more details see this post.
Why do I have to enable a module after installing it? Couldn't you skip this additional step?
This is for security reasons (see the question above). By making you confirm that you want to use a module, apps cannot contain hidden Xposed modules. The same could be done with an additional permission, but I'm not sure if everyone would recognize that and it is harder to implement. As a bonus, this toggle allows you to temporarily disable a modification or to ship an app that contains an optional Xposed module.
How do I develop my own modification using the Xposed framework?
First make sure that Xposed is working fine for you. Then read this extensive tutorial.
Why isn't the Xposed Installer available via Play Store?
I have several reasons for that. I wrote about it in this post. And as I learned, Google does indeed sometimes remove apps which interfere with other apps.
From my point of view, you are free to publish the modules you develop on Play Store (at your own risk - Google might remove them). However, be careful if you plan to get money from them. Paid apps are stored in encrypted containers, which means Xposed can't load them at boot time.
Where can I donate some money to support you?
http://repo.xposed.info/donate
Am I allowed to fork Xposed and publish my own version? What should I consider?
I have written this down in a separate post: http://forum.xda-developers.com/showpost.php?p=46325320&postcount=4372
Can I include Xposed in my ROM?
First of all: One reason why I developed Xposed was to avoid the need to flash anything just for a few small changes. So Xposed is designed to work on top of ROMs, not as a part of them.
That said, I don't forbid you to include it. Here are the conditions:
I won't support you in the process of including it. You'll have to figure out the best way to do it yourself. The easiest way (which will also cause the least problems) is probably to simply put the installer and the modules into /system/app, then your users just need to click the "install/update" button, activate the modules they want and reboot.
There might be ways to really pre-install Xposed so that it's working out of the box, but I don't recommend that. You have to be very careful about file permissions, so there is a good chance it won't work. Again, absolutely no support for this.
I won't support your users with problems which might have been caused by using the included version instead of installing it normally.
When your users report problems which are probably not related to including Xposed in the ROM, please try to give them some support yourself. If you can't find a solution, send them to the correct help thread. For example, this thread is only for the framework. Not for any modules, not even my own.
I expect you to include the latest versions, which are usually the ones working best. I won't support older versions.
Your users must be able to update to the latest version, preferably without installing a new version of your ROM. Again, I won't support older versions.
From the previous point, it follows that you need to include the original APKs, otherwise updating is not possible due to a certificate mismatch. This is even more important since updates are possible from within the app. It also avoids confusion, like users wanting support for any modifications you might have made.
You probably want to include some modules. There are many modules that are not written by myself. Therefore, you need to get permission from the module authors as well. For modules written by myself, the same conditions which you are just reading apply.
Please give proper credit (which includes a link to this thread for the framework). Don't sell it as your own work.
You might have the impression now that I'm not a big fan of including Xposed in a ROM. This impression is correct. It's not too hard to install Xposed and any attempts to pre-install Xposed will just cause additonal support requests.
Why don't you just recommend Xposed in your ROM thread, along with the place where they can download it (this thread) and some instructions how to get the most out of it for your ROM? Give your users some choice!
The following posts list known, confirmed issues of the Xposed framework/installer. The intention is to give more information about the symptoms, the background and possible solutions/workarounds.
I won't add every reported issue here, but only when it's clear (e.g. through analyzed logs) that the problem is indeed an incompatibility with Xposed. It doesn't include module issues and the inability to read and follow instructions.
In case you have found a solution/workaround for one of the issues, please let me know.
ART / Android L / Android Lollipop / Android 5.0
Symptom:
You want to use Xposed and ART. However, as soon as you install Xposed, the runtime is reverted back to Dalvik.
Or you want to install Xposed on Android L, but it displays a message that it's not compatible.
Background:
There is no Xposed support for ART (yet), therefore Xposed automatically reverts the runtime to Dalvik. You can be glad that I implemented this, otherwise you would end up in a bootloop. It's a completely different architecture with pretty much no documentation. Rewriting Xposed for the ART runtime requires understanding the concept, the code structure and many details to know how it works. I have already spent dozens of hours on that and some things are working. But still it's a long way ahead. Don't expect even a test version in the near future. So please don't ask when it will be available - you will surely know when it is ready. I have nothing else to say about that.
Update: ART might be become the default runtime environment in the next Android version. You can read my thoughts about this here.
Update 2: The Android L developer preview is out. Don't try to install Xposed on this ROM! Check here for some explanations and status: http://forum.xda-developers.com/xposed/android-l-support-t2797923
Update 3: An alpha version for Lollipop is available now: http://forum.xda-developers.com/xposed/official-xposed-lollipop-t3030118
Square Enix games (e.g. Final Fantasy) / Puzzles & Dragons
Symptom:
If you have activated Xposed and any module, some Square Enix games (e.g. Final Fantasy) and Puzzles & Dragons don't start anymore.
Background:
I have spent several hours analyzing this issue. Here are my findings: http://forum.xda-developers.com/showpost.php?p=42331031&postcount=1701
Solution:
I don't think I will be able to fix this. Some users reported that it's working after converting Xposed and modules to system apps (but I didn't test it and you have to do this after every update).
Otherwise, you could press the "uninstall" button in the Xposed Installer, reboot, play the game, afterwards press the "install/update" button and reboot again.
Aliyun OS
Symptom:
You experience bootloops after installing Xposed and you find files like /system/framework/core.jex. Typical devices where this happens are THL T100S (with a MediaTek MT6592 processor), THL W200S, CUBOT X6, several ones from Zopo, ...
Background:
These devices ship with ROMs that are based on an incompatible Android fork called "Aliyun OS". These ROMs have a proprietary ahead-of-time compiler called "jazz, which is incompatible with Xposed.
Solution:
No chance of fixing this within Xposed. It was reported that deodexing the ROM and then deleting the /system/framework/*.jex files helps, however you won't get any support for this in the Xposed subforum.
Another possibility might be to disable the JIT compiler by adding "dalvik.vm.execution-mode=int:fast" to /system/build.prop or /data/local.prop (might have an impact on performance). See https://github.com/rovo89/Xposed/issues/14 for details.
MIUI/Dexspy
Symptom:
You experience bootloops after installing Xposed on MIUI. There are references to "Dexspy" in /system/bin/app_process and /system/framework/*.
Background:
There are modified versions of Xposed that have been integrated into some MIUI ROMs. I don't know the details, I don't know if that's still the case for current ROMs, and I don't have the time to follow up on this.
Solution:
Sorry, but I can't support you with this. MIUI is closed-source and in some parts heavily modified from AOSP. I don't have the time to keep track of their changes, and due to some bad handling from their side in the past (forking Xposed without any credit, removing all references to the original project and myself), I'm not very motivated to do so. If you're lucky, Xposed might work on your MIUI ROM. If it doesn't, you'll have to find someone else to look into it. If someone creates a clean patch that doesn't break Xposed on other ROMs, we can talk about including it, but otherwise you'll have to decide between MIUI and Xposed.
Segmentation fault
Symptom:
During the framework installation, you get messages that contain "Segmentation fault". This usually happens on ICS ROMs.
Background:
For some reason, the BusyBox binary that comes with Xposed doesn't work with your ROM.
Solution:
Install the attached app, it contains BusyBox binaries which are compiled with different settings, with all dependencies included in the file. Due to this, the incompatibilities should be gone. These files aren't included by default because they are much larger and not needed by most users.
Resources subclass
Symptom:
You can install Xposed 2.6+ and your phone is still booting afterwards. The version numbers are shown in green in the framework section. However, no modules are working. In the Xposed error log, you find a message like:
Code:
java.lang.ClassCastException: class android.content.res.XResources doesn't extend class x.y.z
You might have a ROM from Huawei, Nubia, ...
Background:
These ROMs use a similar approach as Xposed to theme resources. They create a subclass of Resources which takes care of special handling and return an instances of it from getTopLevelResources(). If Xposed replaced this class with its own XResources implementation, then it would a) break the ROM's additional functionality and b) probably cause crashes if the ROM tries to use this functionality.
Solution:
As a workaround, you can simply disable the resources API in the Xposed Installer settings. Some modules won't work anymore, but most should still work.
Mid-term, I hope that I can build a solution that works with such ROMs as well, however it will take some time.
Huge log file
Symptom:
Your disk space is getting low and you find out that much of it is taken up by Xposed Installer (sometimes several 100 MB). You think that this is a bug in Xposed.
Background:
It's most likely not a bug in the Xposed framework, but a bug or incompatibility of a module. One reason might be the removal of a hack in Xposed 2.6. That hack had a side-effect that some modules relied upon. The might also be other issues, for example the module might simple not be made for your ROM.
In any case, such modules might run into errors frequently and log each of them, causing the huge log files.
Solution:
First, find out which module is causing this. You can check the log file in the Xposed Installer. Somewhere near the top of the exception call stacks (beginning with "at ..."), you can usually find the package name of the module that caused it.
Next, make sure that the module is updated. To be on the safe side, you should update all modules. Then you can clear the log file and reboot.
If there are still issues, please go to the support thread of the module. Check if your ROM is supported and whether somebody else has already reported the issues. If not, post your error.log there and ask the developer to have a look at it.
Note: This thread is here mostly for historical purposes. While Xposed is supported in various forms [EdXposed and LSPosed], developent on the Xposed primary app has completed. Xposed framework compatible modules are still in active development and supported by their respective developers.
Click to expand...
Click to collapse
This is the announcement thread for Xposed for Lollipop, Marshmallow, Nougat and Oreo. I'll post all relevant news here, so subscribe to it if you'd like to stay informed.
You can find a list with Q&A about Lollipop support on the XDA Portal. Please read it, you will find many answers there. Also see this article with much background information on new stuff for Nougat.
Please install it only if you're willing to take the risk of boot loops. Just because it's working fine and stable for me doesn't mean it will work for everyone the same way.
Downloads:
XposedInstaller_*.apk from this thread: Must be installed to manage installed modules, the framework won't work without it.
xposed*.zip from https://dl-xda.xposed.info/framework/: Must be flashed with a custom recovery (e.g. TWRP) to install the framework.
SDK21 is Android 5.0 (Lollipop), SDK22 is Android 5.1 (also Lollipop) and SDK23 is Android 6.0 (Marshmallow).
For Nougat, SDK24 is Android 7.0 and SDK25 is Android 7.1.
For Oreo, SDK26 is Android 8.0 and SDK27 is Android 8.1.
I only support the latest Xposed version per Android release!
xposed-uninstaller*.zip from https://dl-xda.xposed.info/framework/: Can be flashed with a custom recovery (e.g. TWRP) to uninstall the framework.
The small .asc files are GPG signatures of the .zip files. You can verify them against this key (fingerprint: 0DC8 2B3E B1C4 6D48 33B4 C434 E82F 0871 7235 F333). That's actually the master key, the files are signed with subkey 852109AA.
Known issues:
- Before Nougat: Bootloops on Samsung stock ROMs. That's due to Samsung's changes to ART. There are unofficial builds that work around this by deodexing and adjusting the ROM.
- Sony seems to have shipped some ROMs with corrupted services.odex (the embedded .dex is invalid). Those ROMs will bootloop with a "Fatal signal 6" or "No pending exception expected: java.lang.ArrayIndexOutOfBoundsException" error, which I unfortunately cannot fix (see https://github.com/rovo89/Xposed/issues/64)
- Dell ships (at least) their Venue 8 7840 with a non-standard version of ART that is somewhere between 5.1 and 6.0 which obviously isn't supported by Xposed (see https://github.com/rovo89/Xposed/issues/77)
For discussions, please use the discussion threads (Lollipop / Marshmallow / Nougat / Oreo) or another matching one in this subforum.
As you have probably noticed, more than 2,000 posts have been made in the original thread about Xposed on Lollipop. I'm really overhelmed by all your feedback! Also many thanks to those people who have donated already, it's great to see how much Xposed means to you.
Although so much discussion and helping each other is great, it's hard for anyone (including me) to follow. Hence, I have decided to create this thread were only I (and possibly the XDA moderators) will give some updates. This will make it easier for me to inform you about the current status, bugs I know about and so on. Feel free to subscribe to it or simply check from time to time. I'm not sure yet about the best way for me to get a consolidated overview of existing issues that have been confirmed by several people and ideally already have a sufficient information (like logcats, clear description of the error, ...) attached, but I hope we can work something out.
Current status (Feb 19):
The most important issue seems to be the incompatibility with Samsung stock ROMs, especially because it's leading to boot loops. I have been working hard on fixing this in the days since the release, however it's not just a single spot that needs fixing. Thanks to GermainZ for testing and providing good log files! So far, I have detected the following issues:
- Enhanced .oat file format: Samsung has added a "TypeLookupTable", probably for performance reasons. The table itself will be ignored by Xposed, but it also means that the file format is slightly different. I have finally understood what they have done and added some logic to skip the referenes to this table.
- Different size of the String class: They have added a clear() method, which is unusual as strings are usually immutable. As this class is one of few that have special support in native code, I had to add one entry to the virtual table of the class.
- Additional fields in DexCache class: Offsets to some fields are different due to this and need to be handled in native code (as this another central class with native parts directly implemented in ART).
- Verifier rejects ViewDebug class: Doesn't seem to be overly critical to me, yet to be tested whether it's working fine with original libraries.
- Implementation missing for some native methods: Some methods in the reflection classes have been implemented in native code instead of Java. This means I will have to implement them as well.
The changes done by Samsung are bigger than I expected, especially given that ART is very complex and mostly undocumented. Anyway, I still think that once these issues have been overcome, it's better to replace the libaries than trying to manipulate data structures and behavior from "outside" (app_process). Think about it: If they have done such big changes, it's very likely that offsets in these data structures are different from AOSP and would need special handling as well.
It would of course be helpful to have an uninstaller ZIP in case you run into a bootloop. I didn't have time for that yet, but maybe someone can build an initial version that basically reverses the steps of the installer ZIP. For the ART libraries, that should be rather easy. You might want to stay away from moving app_process32 back in case you have SuperSU installed. It will need a special procedure to ensure you don't break either part or even your ROM.
There are other issues for sure, for example it seems that some methods cannot be hooked. That's something that needs more investigation, but I would like to fix the more critical issue like the ones for Samsung first.
That said, I won't be able to work on Xposed for the next days, definitely not before Monday. Keep in mind that this isn't my fulltime job and that an alpha phase might take some time. It would be illusionary to assume that we reach a stable state after a few days, with all the changes that have been done.
I have just uploaded alpha2. It fixes several issues:
java.io.IOException: Invalid argument while reading /data/data/de.robv.android.xposed.installer/conf/modules.list (sometimes it worked fine after a soft reboot), see https://github.com/rovo89/Xposed/issues/25
ClassNotFoundException for system services (e.g. ActivityManagerService) shown in the log, see https://github.com/rovo89/XposedBridge/commit/6b49688c929a7768f3113b4c65b429c7a7032afa
Resources-related incompatiblity on newer CM12-based ROMs
Hooks for very simple methods not working, see https://github.com/rovo89/android_art/issues/4
app_process version not displayed in XposedInstaller
When you flash the new files, the next boot might take a bit longer, as it effectively clears the Dalvik cache (which is necessary because of a change in the ART compiler).
Note that this version is still not compatible with Samsung ROMs (custom ROMs might work if they're not based on stock ROMs). Don't install it, otherwise you'll get into a bootloop and need to restore your backup!
I have already done a lot of investigations and adjustments, as also mentioned in the previous post. However, there are still differences that need to be addressed and it will take more time to resolve them. I can't give any ETA on that.
Ok, quick status update.
Sure, I have heard that Android 5.1 is out. However, it currently makes more sense for me to stablize Xposed for Android 5.0, as I have two productive devices plus the Genymotion emulator running on it. Hopefully, it can then be ported to Android 5.1, but that's hard to tell without having had a look at it.
It's generally hard to estimate any timelines for Xposed-related stuff, for mainly two reasons:
a) Working on Xposed is mainly analysis of AOSP code, traces, closed-source files, followed by some development and testing (often trial and error). I never now which other obstacles are still undiscovered, so the effort is unclear beforehand.
b) Even if I know the effort (= net time), I can't say when I will have the time to actually work on it. For example, this week I probably won't spend a single hour on development. Sorry, but I'm not going to sacrifice my private life for Xposed and I can't spend several hours per evening for this project (anymore).
One of the next steps will be the creation of some scripts that help me to compile and package Xposed. Apart from simplification for me, I hope that this might help other experienced developers to try and contribute themselves (e.g by analysing the issues they noticed themselves).
So much for now, keep enjoying the stuff that is already working and please refrain from asking me when Xposed for 5.1 will be stable... I simply don't know that myself.
rovo89 said:
One of the next steps will be the creation of some scripts that help me to compile and package Xposed. Apart from simplification for me, I hope that this might help other experienced developers to try and contribute themselves (e.g by analysing the issues they noticed themselves).
Click to expand...
Click to collapse
It took longer than expected, but I also think it's better than what I had planned originally:
https://github.com/rovo89/XposedTools
I hope this makes it easier for others to compile the native parts of Xposed and the modified ART runtime themselves and get involved, just like @romracer did. It also makes it easier for me to build and package the Xposed framework, as it was quite a hassle to make sure that all files are compiled correctly, pushed to my PC etc.
I have just uploaded a new flashable ZIP for Xposed 3.0 alpha3 (xposed-sdk21-arm-20150426.zip).
You only need to flash the ZIP again, the Xposed Installer app remains the same (and therefore still shows version alpha2). If XposedBridge.jar has version 64 after a reboot, the new version is active.
Changes:
- Fixed issues with replacing drawables
- Fixed NoSuchMethodError in handleInitPackageResources
- Possibly fixed some errors on ROMs that start in permissive SELinux mode and switch to enforcing mode later
As the question probably comes up:
- No, this version doesn't support Android 5.1 yet.
- No, this ZIP doesn't support arm64/x86 processors yet.
I will eventually support them as well, but as there are unofficial versions for these, I try to work on a few known issues for Android 5.0 before (when I find time for it).
Regarding Samsung ROMs: No progress. No ETA. No promise that it will be supported, although I don't exclude it either. It's simply unclear what further differences between their and AOSP's ART variant come up.
alpha4 (20150430) is now available. It fixes bootloops and crashes on some ROMs, especially on Sony devices. In the logs, there used to be "Too many open files" errors.
References for this bug:
https://github.com/rovo89/Xposed/issues/31
http://forum.xda-developers.com/crossdevice-dev/sony/workaround-bootloops-xposed-lollipop-t3089203
http://forum.xda-developers.com/z3/general/xposed-bootloops-lollipop-t3085627
I have just upload files for a big update. It includes many general improvements/changes and some smaller fixes.
One of the changes is that I decided to avoid confusion about all the different (yet similar) version numbers for installer, framework zip, app_process and XposedBridge by reducing it to two version numbers:
The framework (i.e. all the files in the flashable) zip is versioned with integers (65 for this release). This is at the same time the Xposed API version. Unofficial builds should use suffixes to label their releases.
The Xposed Installer app will continue to use the well-known, human-readable version numbers, e.g. 3.0 alpha3 for this release.
The next bigger change is the installation script in the flashable ZIP. I use a modified fork of BusyBox now to keep the scripts clean and work with a well-known environment. This should make it pretty reliable, even in case some weird recoveries forget to include the "unzip" command. Those who are interested in the technical details should check out the GitHub project.
While I was working at it, I finally built flashable uninstallation ZIPs as well. They revert all actions done by the installation script, provided you didn't delete the backups (<filename.orig>). These ZIPs are only tested with Android 5.0.
The other changes are:
- Installer: Display the installed framework version in green, instead of a static hint about flashing the framework via recovery.
- Fix for incomplete logs on some devices, see https://github.com/rovo89/Xposed/issues/34
- Fix for updated modules crashing until the next reboot, see https://github.com/rovo89/Xposed/issues/22
- Ignore unknown parameters to avoid bootloops on some devices, see https://github.com/rovo89/android_art/issues/7
- Some other internal improvements
- Some cherry-picked ART commits from AOSP
- Devs: Allow hooking native methods, see https://github.com/rovo89/Xposed/issues/28
- Devs: Several debugger fixes, see https://github.com/rovo89/android_art/issues/1
I'm also uploading builds for arm64 and x86 devices. I have tested them on my Nexus 9 and on the Genymotion emulator and didn't notice any issues. The unofficial builds don't seem to be modified from my source code either and I didn't get pull requests on GitHub for these platforms, so I assume that they work fine.
By the way, in case you're a dev (or just interested) and want to try out your modules on Genymotion, you can use this collection of scripts to faciliate the Xposed framework installation on Genymotion. Just follow the instructions, then you can simply drop the x86 framework installation ZIP on the emulator window to install the framework. Don't forget to reboot afterwards.
So much for now. Be assured that official Android 5.1 support will come sooner or later, but the changes above required quite some debugging, development and strategic thinking. It's nice to see that some unofficial ports fill the gap for those who don't want to wait.
About M: The AOSP tag for the preview seems to be just a placeholder, just like it was for the L preview. I haven't tried, but I doubt that compiling ART from this tag will fit to the M preview image. Hence, I won't be investing any of the time (that I don't have anyway) to try and get Xposed running on the preview image.
Those who had issues with installer version 3.0 alpha3 displaying the framework as not installed, please try 3.0 alpha4. ProGuard optimized a bit too much in one very specific case... unfortunately, this never appeared during development, just in the release build.
If modules aren't loaded after a reboot because modules.list wasn't found, try to disable/enable any module. This will write the file again.
One addition to the changes in framework v65: The ZIP files are now signed. This wasn't possible before integrating the custom BusyBox version as some recoveries failed to unzip the signed ZIP.
I have just uploaded ZIPs for Xposed framework version 66 and also replaced the uninstaller ZIPs. There are no changes in the framework itself, so if you installed version 65 successfully, there's no need to update. If you got messages containing "Invalid argument" or "Wrong SDK version: 19, expected 21" while flashing the ZIP files, this should fix them. Thanks to @romracer for the fix!
EDIT: Had to reupload. If you downloaded the ZIPs within the first 15 minutes after this post was published, please download them again.
New files for framework version 67 are now available. They fix an issue with recoveries that have SELinux disabled (even though they might claim that "Full SELinux support is present" in the log, like TWRP does). This seems to have happened mainly on LG devices and caused boot loops, but could affect others as well. Details about the fix are in this commit: https://github.com/rovo89/XposedTools/commit/c55ac907e16947d66012950d119d8db1aea69124
The uninstaller has also been updated, although it's unlikely that it would have caused real issues.
framework version 68 fixes two reported crashes:
"Fatal signal 11" reported for dex2oat or "Compiler driver" in the Xposed log. I have seen a few posts about such issues, but the one I tested the fix with was about Quickoffice. If you notice further issues like this, please report them on GitHub with the full logcat (as only that contains the command line that crashes).
"com.android.phone has stopped" on LG G3. Don't confuse this with support for encrypted apps (LGWeather, LGCover), this can't be fixed unless someone comes up with a decrypter, ideally one that can be executed on the device.
rovo89 said:
Don't confuse this with support for encrypted apps (LGWeather, LGCover), this can't be fixed unless someone comes up with a decrypter, ideally one that can be executed on the device.
Click to expand...
Click to collapse
I had another look at their encryption, or rather the library they use for it. Fortunately, all the decryption logic is in that library (liblgalmond.so), not in ART itself. So I did a lot of digging into their libraries and finally figured out how to call the relevant functions to detect and decrypt their encrypted apps on the fly. That's the requirement to recompile and run these apps.
So here it is, framework version 69 with support for LG's encrypted apps (LGCover, LGWeather, maybe more). Please make sure to clean your Dalvik cache after flashing the ZIP if you have an LG device and had issues with these apps.
It turned out that some LG devices (at least G2 mini and G Pad 8.3) are using encrypted precompiled (odex) apps. These need to be handled differently than apps which contain just the encrypted dex file. With framework version 70, Xposed supports both encrypted dex and odex files. Again, clearing the Dalvik cache might be necessary. If you don't have an LG device or don't get FCs, you can skip this update.
In framework version 71, I have fixed a boot loop on various devices/ROMs related to the "SettingsProvider". If you were getting boot loops with earlier versions, you might want to give this a try.
Apart from that, it should now work properly with Sygic (after reinstalling the app or wiping the Dalvik cache). Note that some modules might not work properly with this app, as they "hack" Android's resource processing (e.g. for images/texts) on a low level. As this conflicts with Xposed (which does a similar thing), I had to disable parts of the API for this app.
I finally created an official version for Android 5.1 (aka SDK22). You can download it as v72 from the first post.
This version is not directly based on @romracer's port, however there aren't many differences. He had merged AOSP 5.1 into the Xposed codebase, I did it the other way around and used this opportunity to reorder and combine the commits. So it's a little bit cleaned up now, which will hopefully make it easier to port these changes to future Android versions. I have also cherry-picked two of his changes that weren't in the offical version yet: A fix for a special case in resource handling on 64-bit and compression of the backup Xposed creates during its installation. Many thanks to @romracer for providing the unofficial version - this gave me the chance to fix and improve many things (which were in turn merged by him and others).
That said, there are also a few new changes:
- In error messages, the Android version is now display as well, e.g. "Wrong Android version: 5.1 / SDK22 ... This file is for: 5.0 / SDK21"
- The files for Android 5.1 can now handle gzip-compressed odex files (*.odex.gz). Those files only exist on certain ROMs (e.g. CM) that merged a few commits proposed by Intel. These commits weren't accepted into AOSP because the way they're handling the compressed files has some flaws. With Xposed installed, these files will be unpacked on-the-fly and recompiled.
The gzip support might also be interesting for ROMs where the /system partition is almost full. It should be possible to gzip some of the .odex files before installing Xposed in order to free up some space. This should work on any odexed 5.1 ROM, even if the Intel commits aren't included. However, this would be very experimental. Volunteers are welcome, but don't forget to create a backup.
Finally, I have updated the uninstaller zips. They include a timestamp now, as new installer zips might require new uninstaller versions. You should always be able to uninstall older versions with the latest uninstaller though. v72 requires at least the uninstaller from today (20150831).
With framework version 73, a bug on 64-bit ROMs is fixed which prevented modules from reading their preferences. I believe that the root cause is a bug in AOSP, but whatever - it should be fixed now. Thanks to @romracer and @cryptyk for the fix.
I have additionally merged a few changes from CyanogenMod. Most of them control when the Dalvik cache is cleared automatically after a bootloop (new feature in 5.1 AOSP, now improved) and one is supposed to increase the compile performance on some ROMs. Don't expect too much though.
In framework version 74, I have fixed some more incompatibilities which could lead to bootloops or crashes. I assume that most of these crash logs contained the string "Incompatible set properties", which is actually a consequence of previous method verification errors. It's hard to say which ROMs and devices were affected - but flashing the new version shouldn't hurt even if everything looks fine with older versions. If you do notice any issues and are sure that it's not caused by yourself, you have higher chances of getting them fixed if you open a detailed GitHub issue (usually I will need at least a full logcat).
I won't be able to work on Xposed for the next 2-3 weeks - no time for development, support or questions at all. If the rumors I have read are right, I should be ready just in time to start porting Xposed to M.
Hi Guys,
My Pixel 2XL "magically automatically" updated itself to Android 11, so I've been forced to migrate to the Canary build of Magisk
to get root back etc.
The problem I have, is that the modules are not being 'detected' despite being installed.
EG: Active Edge Mod for Pixel, module is installed in Magisk, but the app doesn't detect the installation.
Same for other Magisk modules.
I'm hoping its something simple I need to do to detect these, I've searched, but found no definitive answer.
Anyone have any suggestions? Or can point me to more info on canary?
Thanks in Advance!
I noticed v21 has been released, so I jumped back to the stable channel and updated app to 8.0.1, but strangely still have the same issue!
Modules aren't being detected.
I get the following error when I try to run energized in terminal;
/system/bin/energized[13]: .: /sbin/ .magisk/modules/energizedprotection/system/bin/setupFiles.sh: No such file or directory
You've got two rather special modules there, so they're hardly the benchmark for if things work or not.
For Active Edge Mod you're probably better of asking for help with the developer. And judging by that error the Energized developer also need to update their module, since that path no longer exists on A11 (and it's bad practise to hardcode the path like that anyway). You could edit the energized file in the module directly, to point to the correct path (check the module thread, I'm sure someone has brought this up already).
So, in conclusion: unless there are other more "normal" modules that doesn't work there's no issue and you need to contact the developers of these two modules so that they can fix them.
Thanks @Didgeridoohan, I wasn't aware that the paths had changed. That would explain a lot...
Out of curiosity, what would you consider a "normal" module? For testing purposes..
Cheers!
Thanks @Didgeridoohan, I wasn't aware that the paths had changed. That would explain a lot...
Out of curiosity, what would you consider a "normal" module? For testing purposes..
Cheers!
I always like @osm0sis' modules. They utilise the module installer scripts very nicely and pretty much always work (and if they don't something usually has gone horribly wrong).
Well, hijack the module installer scripts nicely.
Well, I do have @osm0sis BusyBox Magisk Module installed, but I think I read a tweet that TopJohnWu was incorporating a busybox binary in Magisk..
I can see that all of my Magisk modules (except Systemless Host) has a "folder icon with an i" on it. Can't find what that means.. and I get a blank screen when i press it.
Magisk has had Busybox integrated for ages... Lately it's become more usable for scripts and modules though. It's not exposed to the rest of the system like @osm0sis module is.
The icon you're seeing is the module readme. Click that and it should open in the window that you see.