Android Auto and Samsung Galaxy S3 LTE - Android Auto General

Hello. Recently I have decided to upgrade my fathers aging phone (a Samsung Galaxy S3 LTE) to a custom ROM in order to support Android Auto. I have tried multiple variations both stock ASOP and CM based, Lollipop and Marshmallow, but I have a persistent issue. Android Auto works correctly but with a display problem... the car's display has a very green tint (just like in the days where the display was analog and one of the connection was damaged and one color was missing). Tried different cables and a Huawei tablet displays Android Auto just fine. Other than this display issue everything seems to work as expected. I know the phone is old, but I have a feeling that this is a software issue and Resurrection Remix 5.7.4 gives it a new lease on life. Do you have any idea how this issue could be fixed?

Related

[Q] After 4.4.4 update, Screen Mirroring doesn't work!

Hello everyone!
My phone has been running Stock 4.3 since it went out. Fact is that I always used Screen Mirroring feature with no problems over that version, but yesterday I updated my Galaxy S3 i9305 to the latest firmware, 4.4.4. Now, don't know why my phone can't connect to my SmartTV as well as it always did.
Can anyone tell me any reason, please? My phone is running quite well, but not with that feature wich I use so often...
Thanks in advanced
Please!! No one's gonna help me? Pleeeeeaseee!!!
tried a factory reset? or did it when installing this update?
Of course! I installed this firmware for twice. First time the German version, and after that the official 4.4.4 for i9305. It never worked on none of them. My phone is working better than ever and flawlessly, but missed that feature... just now when I bought a Smart TV :'( why this is happening to me? :'(
Hi. Only you (and me) have "this" problem? When samsung rolls out 4.3, there was trouble too with miracast. Solved with a future 4.3 *patch* from samsung. I think we only have to wait for a 4.4.4 patch... ?
It may depend on your TV aswell.
I have a Sony KDL W905. And I am unable to use Screen mirroing with this phone on both 4.12 as well as the new 4.4.4 firmware.
For that matter I am also unable to use it from my Galaxy Note8 running 4.4. So I am starting to suspect the TV..
Oddly enough when using screen mirroring from the video app, it works fine.
Welll... i don't have tv with miracast or google chromecast. I have a Measy A2W. It works with 4.3, now with 4.4.4 don't...
Okay. yesterday reinstalled the stock ROM 4.4.4. Before had done a factory reset. The Miracast screen mirroring worked. but, after doing root, crashed. The problem is in the root. anyone have a solution? Thank you
I have the same problem. Are you sure it's in rooting?
S3 with auto-update to 4.4.4. : screen mirroring doesn't work any more!
Same problem here. I used screen mirroring frequently on my Samsung S3 with the previous standard Android OS, 4.3.
TV: Smart TV, SAMSUNG UE40H7005LED
I installed the scheduled Samsung update to 4.4.4. and screen mirroring doesn't work any more.
My wife has the same phone, did the same update, and it doesn't work on here phone either any more!
Both phones are standard, of the shelf phones, not rooted.
Something is wrong in this update!
Any solutions?
s3 i9305 lte screen mirror not workin on 4.4.4 after root
Hi ppl i have s3 i9305 ltr running stock kitkat 4.4.4 and screen mirror workin flawless with measy a2w dongle until i rooted device. Now screen mirror is not working. Phone still conects to dongle and plays localy stored videos/music/photos from internal or sd storage but wont mirror i get "screen mirroring has been disconnected due hardware issues". I unrooted phone and all is good again screen mirror works fine. Can someone please help? I had same issue on s4 mini i9515 but was able to find and edit hdcp config. For the life of me i cannot find this on s3 and edit it someone please help as i love my phone rooted but want to keep screen mirror. Regards gaz
Same problem on Galaxy I9305 / android 4.4.4.
No rooted mobile.
I tryed the factory reset but no improvement came. When I try to connect the mobile to the device (minix x8 h plus) at first it seems to match but than nothing... Sometime it seys "hardware problems..." sometime only "disconnect..."
Does anyone have any news?

wifi and hotspot problem.

hi every body .. i have a problem in my s4 active i9295 .. the WiFi and hotspot and the Bluetooth dos't work .. any one can help??
same problem here.
I cannot active the Wifi nore the Blutooth.
I have swapped the main board with a second "Samsung Galaxy S 4 Active" and the problem staid with the main bord.
I was think of replace the stock ROM with a custom one to se if it a bug within the stock ROM.
Any suggestion?
Just replaced the Stock ROM with CM ROM.
As expected, it did not make an difference.
The OS is trying to enable the WIFI (or bluetooth) for a few seconds and fails.
There moments (both with the custom and CM ROM) when the WIFI and bluetooth did activate but this was short lived.
I am almost convinced that it is a hardware problem.
Any suggestion and advice is appreciated.

Samsung Galaxy Tab S2 SM-T719 (gts28velte)

Can some one give me advice which custom rom can use with my Samsung Tab, I prefer Android 10 if si possible!
I need GPS, Bluetooth,WiFi and Data and Camera to work.
Current rom now is Lineage os 16.1 but some times Bluetooth drops or connects slowly (have to switch on/off several time to find/connect bluetooth devices).
Thanks in advance!
P.S. Or if some one can port Havoc or other Android 10 working roms?
I M looking for the same. let me know if you find anything, so far i m experimenting with these build but lte seems to do not work: https://lineageos.wickenberg.nu/gts28velte
Still nothing to share !

Question Samsung Gears S3 keeps disconnecting

Hello everyone!
Got my Note 12 Pro a few days ago and biggest issue I have is with the bluetooth connection.
It paired with no problems, I have the Galaxy Wearable app and the plugin, it works fine for a bit and then randomly disconnects. It can work for 10 hours or disconnect 3 times in one hour.
Noticed on some other forums people complaining about bluetooth issues on other Xiaomi phones.
The watch, app and plugin are all on the latest version. The app has all permissions and zero restrictions on battery saving.
The phone is running MIUI Global 14.0.8 on Android 12.
I tried AVRCP 1.3; 1.4; 15 (default) and 1.6. MAP 1.2 (default); 1.3; 1.4. Switched between them trying every combo, none of them is stable. It never tries to automatically reconnect.
The watch worked flawlessly with my Moto G8 Plus. Sometimes it would disconnect (maybe once a week), but it automatically reconnected in a matter of seconds.
Has anyone figured a solution to the problem? I'm assuming I'm not the only one who has this issue.
Thank you!
Same problem for me, miui 14.0.2 on android 13.
Poco X3 pro.
No idea what to do...
Fixed the problem with a new phone. Got a Moto G73, the watch stays connected like it should. No trying to say something bad about the Xiaomi, I really liked the hardware of the phone, it's really good "bang for buck", but the Bluetooth and other small nuisances in the software made me go back to Moto.

Best ROM/Android Version for Android Auto Mirroring (Car gauges)

Hey guys,
I'm back here after many years because I bought a Pixel 5 to mirror my screen to show my EcuTek gauges for my Infiniti Q50 on the infotainment display via Android Auto. I was very into Android modding back when I had the Nexus 5X, so I thought this would be an easy task and I was very wrong. So much has changed since then. (there's two firmwares now? lol)
I got the phone rooted on the latest AOSP image, but none of the Android Auto root apps seem to have too much of an effect. I can't downgrade AA because it appears baked into the AOSP Gapps.
What's the best setup to use for this? The phone can be on any version/ROM of Android and will not be connected to cellular/wifi/hotspot so it can't auto-update.
Thanks for the help!

Categories

Resources