Related
Hi everyone,
I am using the application Raiffeisen Twint (version 1.2.16.0, https://play.google.com/store/apps/details?id=ch.raiffeisen.twint) on my Magisk's rooted Google Pixel (Android 8.0, Nov. 2017) without problems for a while, but since Magisk 14 versions, the application stopped working and the application reports that root is detected.
I have successfully updated to Magisk 14.5 (from 14.2), but root is still detected by the application, even with Magisk Hide activated for the application and the Magisk Manager package moved to a random name (could also be related to the updated application).
I have cleared the data of the application several times and it doesn't help and root is still detected by the application...
Anyone has a idea?
Thanks for your answers!
Like I said in the Magisk support thread, I can hide Magisk from that app just fine (on Magisk v14.5 beta)...
You don't happen to have any other mods that might trigger an app looking for root (like Xposed)? Can your device pass SafetyNet? Have you previously been rooted with any other root method and do you have any remnants of that left (root management apps, etc)? Do you have any apps that are known to be used for questionable purposes. By "questionable purposes" I mean getting access to paid features without paying, etc. Not necessarily that you use the app for this, but that the app might be used in such a manner... Etc, etc, etc. Every little detail might count.
Hi Didgeridoohan,
Thanks for helping me!
I do not have any mods installed in Magisk and also no Xposed. My device is passing SafetyNet!
I have performed a factory reset last week and since that I only rooted my device with Magisk 14.2, so no other rooting applications used. For details, I have unlocked bootloader, TWRP recovery installed and developer options and USB debugging activated.
My settings in Magisk are:
I have following applications installed on my device:
https://pastebin.com/pmt4jBMV
Do you see any applications with "questionable purpose"?
I get this message in the application:
Thanks a lot!
At a quick glance everything looks ok...
I did some experimenting with the other Raiffeisen apps you have installed, in case they also detect root and "tell" on you. At least one of them did detect root, but from what I could see it didn't make any difference for Twint.
I also tested installing a few of the root apps you had installed (in case the app looks for certain known apps), but that didn't make any difference either. I could still successfully hide root.
My guess is that it's something along these lines tough. That it's using another app or detecting a root app. You could start experimenting with that. Clearing data for the other Raiffeisen apps and adding them to MagiskHide and also removing root apps. Try disabling USB debugging and developer options as well (didn't make difference for me, but worth a shot).
Simple. Change name of package from settings in Magisk Manager, then MAKE SURE you add twint app to magisk hide list, then ERASE DATA of twint app, change package name once again and run twint. Working with Magisk 14.5. Screens if u want available. Or video.
Hi Didgeridoohan, Hi Mamama07,
Thanks for your help, but sadly none of your suggestions did worked... until the update of the application released yesterday, to fix problem related to rooted devices! [emoji3]
Thanks anyway again for your help! [emoji106]
I had the same problem (with BCV Twint) and after a few tries, changing Magisk Package Name worked!
I was using the Xposed framework today and every app kept crashing so disabled Xposed framework and related modules.
However, afterwards my banking apps stopped working.
These apps are logging me off because they detect my phone has been jailbroken.
The app in question is Lloyds banking app (UK)
I have Magisk 16.0 on a Samsung S8 G950F with renovate ice 7.2 installed
Everything was working before
When I tap on safety net check i get all success
In Magisk hide the apps I want to hide the status of are checked (lloyds being one)
I uninstalled, cleared cache of the app, restart the phone and installed the app again, then before starting it up I checked the option in Magisk hide and then opened the app. However it didn't work.
Any idea what I am missing?
Thank you
http://www.didgeridoohan.com/magisk/MagiskHideHidingRoot
Tried those options already
Hide Magisk manager but didn't work
I would uninstall the banking app or delete it's memory completely. The app might have stored the root status and a phone usually does not unroot anymore.
Unfortunately the banks do not see that the owner of a rooted phone usually works more on keeping his phone safe and free of ads.
I'm going to try that again but doubt it will work as I have tried it already. Maybe there's something residual left that can't be removed even after cleaning the data. I see a lot of apps folder in my file manager from apps that I deleted ages ago.
LLoyds bank
went to bank info and cleared cache and data
Uninstalled app
went to file manager and removed residual files folders
installed clean master and did a cache junk file clean up
restart phone in recovery and cleared cache and dalvic cache
rebooted phone and installed lloyds banking app
opened magisk manager before opening lloyds and ticked lloyds app in magisk hide
opened app and inputted login information
same error: your device appears to be jailbroken etc
Have you tried with Magisk v16.7 (MagiskHide has been improved since v16.0)?
Have you tried repackaging the Manager?
Have you tested if the app is detecting Magisk in the Manager name?
Have you tried grabbing a logcat, to see if it's possible to figure out what's happening?
Etc...
In other words: All of the things that are found in the link I gave you earlier.
is your kernel set to permissive? ive noticed if i set kernel to enforcing then my banking app works with magisk hide. im with santander uk
dead0 said:
is your kernel set to permissive? ive noticed if i set kernel to enforcing then my banking app works with magisk hide. im with santander uk
Click to expand...
Click to collapse
That is interesting. MagiskHide should be able to hide a permissive SELinux. I wonder why it doesn't seem to work...
Didgeridoohan said:
That is interesting. MagiskHide should be able to hide a permissive SELinux. I wonder why it doesn't seem to work...
Click to expand...
Click to collapse
it is strange... seems on latest builds of banking apps, they are somehow still detecting if kernel is permissive or enforcing.
cpu2007 said:
I was using the Xposed framework today and every app kept crashing so disabled Xposed framework and related modules.
However, afterwards my banking apps stopped working.
These apps are logging me off because they detect my phone has been jailbroken.
The app in question is Lloyds banking app (UK)
I have Magisk 16.0 on a Samsung S8 G950F with renovate ice 7.2 installed
Everything was working before
When I tap on safety net check i get all success
In Magisk hide the apps I want to hide the status of are checked (lloyds being one)
I uninstalled, cleared cache of the app, restart the phone and installed the app again, then before starting it up I checked the option in Magisk hide and then opened the app. However it didn't work.
Any idea what I am missing?
Thank you
Click to expand...
Click to collapse
If it's anything like Barclays's App, once it detects a rooted phpne, that's it - you're stuffed, as the App sends the phone's identity to Barclays's blacklist. The only way out is a reflash, which will give the phone a new identity.
.
DaystromLIVR said:
If it's anything like Barclays's App, once it detects a rooted phpne, that's it - you're stuffed, as the App sends the phone's identity to Barclays's blacklist. The only way out is a reflash, which will give the phone a new identity.
.
Click to expand...
Click to collapse
To follow-up, it appears that Barclays doesn't use SafetyNet, but something called libShield (??!).
Whenever Barclays detects root on one of my phones, I have to reflash it to stock, thus giving it a new identity.
I have to follow this sequence, in order to prevent tripping:
Reflash the device to stock
Make sure you get Magisk installed BEFORE re-installing the banking app.
Once you've installed the banking app, DO NOT RUN IT yet.
Make sure MagiskHide is ticked for that banking app (and any related apps, like Pingit).
Do the 'randomise Magisk\'s package name' thing.
Set the Superuser thing to 'deny' by default (Barclays seems to trip if it detects that a user is pressing DENY, by the longer time taken).
Reboot
Make sure everything is working
Then, start the app, and begin the reregistration process.
It's happened on me to. On Bank Mandiri App. On other Bank running normaly. The issues happened after upgrade into Magisk 17.1
On Magisk 16.x it's Work without any issue.
Any clues what going on and how to fix it?
repackaging the Manage with a random name is the trick,i did it and its works
In my case (RaiPay in Romania) I did all things except reflashing and it did not work.
Logcat: https://gist.github.com/eusebiu/8110ef85b1d4093c557b32a101fac299
eusebium said:
In my case (RaiPay in Romania) I did all things except reflashing and it did not work.
Logcat: https://gist.github.com/eusebiu/8110ef85b1d4093c557b32a101fac299
Click to expand...
Click to collapse
Hi, I also have RaiPay (Czech rep.), please try to change SELinux to "enforcing" with this module, it works for me:
https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-manager-t3760042
PlagueCz said:
Hi, I also have RaiPay (Czech rep.), please try to change SELinux to "enforcing" with this module, it works for me:
https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-manager-t3760042
Click to expand...
Click to collapse
Hey! Thanks for replying! In my case it was already set to "enforcing". I tried changing it using KA-Mod from enforcing to permissive and back but still same result.
eusebium said:
Hey! Thanks for replying! In my case it was already set to "enforcing". I tried changing it using KA-Mod from enforcing to permissive and back but still same result.
Click to expand...
Click to collapse
Hi, sry I didn't reply, too busy.
Please try following Magisk modules:
Busybox for Android NDK
Magisk SELinux Manager (set to enforcing)
MagiskHide Props Config
SafetyPatch
SQLite for ARM aarch64
Modules can be found in Magisk "Downloads" tab (except SELinux manager).
I have these modules installed and my RaiPay works, in combination with enforcing SELinux. I think both our RaiPay apps are very similar if not the same.
PlagueCz said:
Hi, sry I didn't reply, too busy.
Please try following Magisk modules:
Busybox for Android NDK
Magisk SELinux Manager (set to enforcing)
MagiskHide Props Config
SafetyPatch
SQLite for ARM aarch64
Modules can be found in Magisk "Downloads" tab (except SELinux manager).
I have these modules installed and my RaiPay works, in combination with enforcing SELinux. I think both our RaiPay apps are very similar if not the same.
Click to expand...
Click to collapse
Thanks for answering! I think the SafetyPatch was not correctly installed as I get an error message at boot (something with Android has an internal system error. Contact the manufacturer) => not working...
eusebium said:
Thanks for answering! I think the SafetyPatch was not correctly installed as I get an error message at boot (something with Android has an internal system error. Contact the manufacturer) => not working...
Click to expand...
Click to collapse
Yes, I get the same message, is your RaiPay working? And have you tried RaiPay without Magisk installed on your device?
I recently rooted my new Mi A2 Lite using Magisk.
So my current banking app detected the root and now I cannot use it anymore. I tried Root Cloak and MagiskHide but both of them did not work either. It still shows the message saying my phone is rooted.
How do I debug that now. I need it to be working anyhow.
App: K-Plus; play.google.com/store/apps/details?id=com.kasikorn.retail.mbanking.wap
https://didgeridoohan.com/magisk/MagiskHideHidingRoot
arunsharmaofficial said:
I recently rooted my new Mi A2 Lite using Magisk.
So my current banking app detected the root and now I cannot use it anymore. I tried Root Cloak and MagiskHide but both of them did not work either. It still shows the message saying my phone is rooted.
How do I debug that now. I need it to be working anyhow.
App: K-Plus; play.google.com/store/apps/details?id=com.kasikorn.retail.mbanking.wap
Click to expand...
Click to collapse
I recently had the same problem, but with a different banking app.
What helped me in the past was to hide Magisk Manager with a random package name. It is an option in Magisk Manager itself. Unfortunately it doesn't work anymore but i could mask Magisk Manager with the Samsung app S Secure and now it's working again .
This was included in my Galaxy S7 ROM so you probably need to find the apk for the app or find a similiar working app for your phone model.
Hope this helps.
Daci54 said:
I recently had the same problem, but with a different banking app.
What helped me in the past was to hide Magisk Manager with a random package name. It is an option in Magisk Manager itself. Unfortunately it doesn't work anymore but i could mask Magisk Manager with the Samsung app S Secure and now it's working again .
This was included in my Galaxy S7 ROM so you probably need to find the apk for the app or find a similiar working app for your phone model.
Hope this helps.
Click to expand...
Click to collapse
Alright! Can you clarify what on how to hide Magisk with a different package name. I am still pretty new to Magisk. Thanks.
arunsharmaofficial said:
Alright! Can you clarify what on how to hide Magisk with a different package name. I am still pretty new to Magisk. Thanks.
Click to expand...
Click to collapse
Open Magisk Manager, go to settings and tap on Hide Magisk Manager. If your banking app doesn't work right away try a restart. If it still doesn't work try to mask Magisk Manager with S Secure or similiar apps.
The magisk hide feature does not work
nm180618 said:
The magisk hide feature does not work
Click to expand...
Click to collapse
It does work, the steps I took were:
1) Install Banking app
2) Open it and get notified about the phone being rooted
3) Use Magisk Hide feature to hide the Banking app
4) Go to phone's app settings
5) Baking app settings
6) Clear storage data (Clearing only the cache could work too, I didn't test it)
7) Profit!
Hope that works for you.
Magisk hide doesn't seem to be working for me. Magisk says it's working and safety net passes, but I've tested multiple apps and they can see that I'm rooted. Hiding magisk with a random package name doesn't work either.
Yesterday I installed magisk and went to hide options and checked my banking app. I was amazed to see banking app allowing me to do everything without limited functionality due to "root" like before. But today banking app detected root again and limited all functions, how? There haven't been any updates for banking app yet it seemed to no longer be fooled by magisk.
Same goes for me with the K-Plus app as well. (สวัสดีคับผม) Use Magisk Hide to hide the root access but it crashes the bank app instead.
Not sure what I've missed.
Gpay and banking are still detecting root/custom rom
Magisk and manager installed.
module SaMoDXv1 installed.
Safteynet is showing green
gpay and banking apps hidden
Using hide magisk function
removed all Magisk related stuff from SD card.
Cleared cache from gpay and banking apps .
Turned off usb debugging.
What else is there?
Just installed root checker basic, it sees root. I hide magisk from it and it still sees root. Is that right?
beythas said:
Same goes for me with the K-Plus app as well. (สวัสดีคับผม) Use Magisk Hide to hide the root access but it crashes the bank app instead.
Click to expand...
Click to collapse
Try following the 'Promon' section in https://github.com/Ingan121/UDSBypass
Hi,
I'ould like installing Fde.ai on my One plus 6 rooted with Ice Renovate 11.1 rom, but I'm not sure that installation is compatible with "Rice tweaks", a tweak app for this rom no my device.
Peraphs there is someone who does know the answer?
Tks and regards.
Roberto
What I do
Go to setting -> Magisk Hide -> disable then enable.
This way worked with me .
I used Magisk Manager v 7.2.0 (213).
Magisk v 19.3 (19300).
What worked for me is using the "Hide Magisk Manager" feature in settings. Now apps are not promoting about device being rooted and are running fine now.
Anyone solved this problem?
I still have a banking app with this problem. I tried many times but still not working.
Magisk hide dont work for this app.
nguyenlinh said:
Anyone solved this problem?
I still have a banking app with this problem. I tried many times but still not working.
Magisk hide dont work for this app.
Click to expand...
Click to collapse
So far there are very few apps that I've seen that can not be tricked with tips from the guide linked in the second post of this thread. Give it a shot...
Can you try it?
https://play.google.com/store/apps/details?id=vietcombank.itcenter.smartotpcorp
I Cannot run this app.
Thanks
nguyenlinh said:
Can you try it?
https://play.google.com/store/apps/details?id=vietcombank.itcenter.smartotpcorp
I Cannot run this app.
Thanks
Click to expand...
Click to collapse
Runs fine with the app on the Hide list and the Magisk Manager repackaged with a random name.
More:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Can someone check this for me?
https://play.google.com/store/apps/details?id=no.apps.dnbnor&hl=en_US
Iam using MH v60 with 19.3 still nothing. Iam fighting with that about 4 months now((((
Hi, thanks for reading.
I've used Magisk 17.3 with all my bank apps perfectly, with Magisk hide and Magisk manager hidden.
After update to 18.0 and update manager to 6.1, the bank apps start detecting root status, and stop working.
So, I've flashed back to 17.3 and old manager 6.0.1, and everything's back to working normally.
My system:
Poco F1
LineageOS 16.0 built 27/11/2018
The apps are from Thai's banks:
SCB EASY: detected root, still working
TMB Touch: detected root, stop working
KTB Next: detected root, working partially
If you'd want any log or anything, please also tell me how to get them.
Adios2nd said:
Hi, thanks for reading.
I've used Magisk 17.3 with all my bank apps perfectly, with Magisk hide and Magisk manager hidden.
After update to 18.0 and update manager to 6.1, the bank apps start detecting root status, and stop working.
So, I've flashed back to 17.3 and old manager 6.0.1, and everything's back to working normally.
My system:
Poco F1
LineageOS 16.0 built 27/11/2018
The apps are from Thai's banks:
SCB EASY: detected root, still working
TMB Touch: detected root, stop working
KTB Next: detected root, working partially
If you'd want any log or anything, please also tell me how to get them.
Click to expand...
Click to collapse
1.restore magisk manager with original package.
2.disable hide app.
3.reboot.
4.rehide msgisk manager.
5.rehide app.
6.reboot.
it work for nexus 6p.
Sent from my Nexus 6P using Tapatalk
Can confirm that this works, thanks.
For me, it started getting detected on 17.x even before updating to 18, right after the banking app (Sparkasse) was updated.
LG G6.
hsiehboss said:
1.restore magisk manager with original package.
2.disable hide app.
3.reboot.
4.rehide msgisk manager.
5.rehide app.
6.reboot.
it work for nexus 6p.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
This didn't work for me. I had to downgrade back to 17.1 to get my banking app working again. Appears that the root detection prevention is a regression in this latest version.
-- SSS
hsiehboss said:
1.restore magisk manager with original package.
2.disable hide app.
3.reboot.
4.rehide msgisk manager.
5.rehide app.
6.reboot.
it work for nexus 6p.
Click to expand...
Click to collapse
This doesn't work for me.
Did all of these...still got detected.
I have the same problem. Magisk says: ctsProfile: False and Google Pay don't work. Also my Banking App detects root.
I flashed today the latest Los 15 build and the crt false error is till there after flashing magisk 18. The same error is also with 17.4...
Tell me if I'm wrong but I believe we have two different reports: the original report where root is detected, and the ctsProfile/basicIntegrity failing. The second one is a regression fixed by rebooting device (however, it is annoying to reboot 10 times a day because suddenly SafetyNet fails for no reason).
I am using Magisk Hide Props module, and after 18.0 update Santander App detects root, even with Magisk Manager says I pass safetynet
It's happened with my bank app as it detected root & saftynet false and have to downgrade to ver.17.2
Sent from my SM-C900F using Tapatalk
See in install app delete old magisk manager, after install magisk 18.0 new magisk manager rename to manager.
I have same problem. After install v18 magisk, same bank app can detect the system is rooted. Downgrade to v17.2, all bank app become normal.
Same here since Magisk 18 my BankApp (Intesa Sanpaolo) start and says that there is a safety problem and it close, if I choose Magiskhide it doesn't start at all.
SafetyNet check spin without an end.
With Magisk 17.1 and 17.3 no problem at all.
Same problem here, after upgrading to Magisk 18 claiming to better hide root in the history, apps now suddenly detect root.
This affects also the Safety Net check and Google Pay... so far, Root Hiding in 18.0 seems COMPLETELY broken.
A solution would be great.
Later... after downgrading to Magisk 17.2, MagiskHide is working for me again and Safetynet checks succeed. The dev is aware of the problem, an issue is open on the Magisk Github (#907)
After uninstalling and reinstalling my bankapp now works without any problem and doesn't detect root even if is not under Magisk hide
I can confirm the v18 update breaks something and BOTH safety net checks fail. So all apps detect you are rooted, especially bank apps and Get Pay. Downgrading back to v17 restored everything to normal.
The only thing I could think of is the installation method. I did the direct install rather than installing the zip via recovery. Not sure if it makes a difference but I will wait for next release.
I am on a Pixel 2 with Android Pie updated to the Aug 2018 release.
---------- Post added at 12:47 PM ---------- Previous post was at 12:43 PM ----------
Harlock1978 said:
After uninstalling and reinstalling my bankapp now works without any problem and doesn't detect root even if is not under Magisk hide
Click to expand...
Click to collapse
I did not uninstall but tried clearing bank app data and cache and the problem persisted. Magisk still showing all red for safetyNet. Just sharing testing feedback.
@Djtrip83 Did you try just toggling MagiskHide off and on once after updating to v18? Sometimes MagiskHide simply needs a restart after an update...
I did that too. Toggled Hide on and off for all apps. Repackaged Magisk. Turned off USB debugging. Removed modules installed. Tried everything I thought would work. Even restored hosts in case Ad Away affected something on /system.
The only thing I did not do was remove root apps and re-install them to re-grant permissions after the Magisk update. And I wonder now if uninstalling Magisk completely and make a brand new clean install with v18 would work rather than upgrading.
I was at a loss so I downgraded. Sorry I don't have a log to share. However, v17 works fine.
Djtrip83 said:
I did that too. Toggled Hide on and off for all apps. Repackaged Magisk. Turned off USB debugging. Removed modules installed. Tried everything I thought would work. Even restored hosts in case Ad Away affected something on /system.
The only thing I did not do was remove root apps and re-install them to re-grant permissions after the Magisk update. And I wonder now if uninstalling Magisk completely and make a brand new clean install with v18 would work rather than upgrading.
I was at a loss so I downgraded. Sorry I don't have a log to share. However, v17 works fine.
Click to expand...
Click to collapse
We might be misunderstanding each other, but what I'm talking about is simply to go to the Manager settings and change the toggle for MagiskHide to off and then on. No need to do anything to the Hide list or anything else... Did you do that? As I said, that's sometimes something you the to do after an update, but it's rare.
Hi
I have a problem in the clubhouse app that login not complete on any rooted device ... no problem on Non Root devices
I hide magisk app add clubhouse to magisk hide and EDExposed blacklist but still not working.
also, the same issue is in Mcdonald's app.
any idea how to solve these issues
Note: My Bank app works after adding it to magisk hide and hide magisk app, which means i did it right.
thanks
anyone help me please
Have you tried removing the Magisk app? That's a popular way of detecting Magisk, even with a repackaged app. It's practically impossible to completely hide it on anything below Android 11, and even then it's necessary for the app to target A11 for full hiding to work (which won't happen until Google enforces that, maybe later this year).
Of course, Xposed/EdXposed/LSPosed tools can probably be used to hide the app fully...
Didgeridoohan said:
Have you tried removing the Magisk app? That's a popular way of detecting Magisk, even with a repackaged app. It's practically impossible to completely hide it on anything below Android 11, and even then it's necessary for the app to target A11 for full hiding to work (which won't happen until Google enforces that, maybe later this year).
Of course, Xposed/EdXposed/LSPosed tools can probably be used to hide the app fully...
Click to expand...
Click to collapse
thanks for your reply
if i removed magisk .. everything that use root will stop and i don't want that
also can you please tell me how to hide the app fully using EDXposed
I did not say "remove Magisk"... I said "remove the Magisk app". Just uninstall the app and try and see if Clubhouse still triggers. If it works we know it's looking for the app and you'll have to either freeze/uninstall the Magisk app when using Clubhouse and then reinstall it again afterwards, or use one of the available isolation methods. I've got a few of those mentioned here, but I'm sure you can find more if you search (it's been covered a lot):
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Isolation_apps
zamlkawy said:
Hi
I have a problem in the clubhouse app that login not complete on any rooted device ... no problem on Non Root devices
I hide magisk app add clubhouse to magisk hide and EDExposed blacklist but still not working.
also, the same issue is in Mcdonald's app.
any idea how to solve these issues
Note: My Bank app works after adding it to magisk hide and hide magisk app, which means i did it right.
thanks
Click to expand...
Click to collapse
for Mcdonald's try this
[MOD][XPOSED][4.1+] McRoot (McDonalds Global App)
McRoot McDonalds Global App security fix Remove checks of: root unacceptable apps unacceptable device properties (developer options etc) Note: The app requests SafetyNet pass! Use Magisk+Riru+Riru-Unshare etc Install notes: install apk...
forum.xda-developers.com
Hi. I also have Magisk installed on my device. I uninstalled Magisk app, tried logging into clubhouse again, but still the issue persists.
After receiving the missed call while trying to sign in, I get the notification, 'There was an error please try again'
Clearing the clubhouse app data, uninstalling and reinstalling the app again hasn't helped at all. I get the same issue.
I have Magisk 23.0 installed on my Oneplus5T running Android 10.