Database Develop

Did anyone successfully able to solve this problem?

START (Green)
Restart bootloader (Red)
Recovery mode (Red)
Power off (White)
Press voluse key to select, and press power key to select.
FASTBOOT MODE (Red)
PRODUCT_NAME - msm8996
VARIANT - MTP UFS
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - 9fbc1152
SECURE BOOT - enabled
DEVICE STATE - locked
I have used (http://www.androidbrick.com/unbrick-oneplus-one-two-3-3t-qualcomm-hs-usb-qdloader-9008/) MSMDownload Tool, this (http://www.technobuzz.net/unbrick-oneplus-3/) tool and (https://forums.oneplus.net/threads/unbrick-guide-oneplus-3t.481214/) this MSMDownloadTool, they all showed “Download Complete”. And then my boots to fastboot mode with message mentioned above.
I can not go to recovery mode which is asked in one plus download support (http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_4.1.6/)
In fastboot mode if I give any command from Command Prompt it says Not Allowed since OEM is Locked

If you can boot android you need to go into developer options (tap 7 times in the build in Settings/about). IN developer options enable the Allow OEM unlock options and then just use the fastboot command to unlock bootloader. *fastboot oem unlock*

Jahdiel2011 said:
If you can boot android you need to go into developer options (tap 7 times in the build in Settings/about). IN developer options enable the Allow OEM unlock options and then just use the fastboot command to unlock bootloader. *fastboot oem unlock*
Click to expand...
Click to collapse
Nope. I can't boot android. I am stuck at fastboot mode only with no recovery mode.

lukesh9923 said:
Nope. I can't boot android. I am stuck at fastboot mode only with no recovery mode.
Click to expand...
Click to collapse
Is the device recognized in fastboot mode?

Jahdiel2011 said:
Is the device recognized in fastboot mode?
Click to expand...
Click to collapse
Yes. (btw I have tried "fastboot oem unlock" in command prompt it say remote oem unlock not allowed.

Have you tried this unbrick tutorial?
https://forum.xda-developers.com/on...k-unbrick-tutorial-oneplus-3t-t3515306/page41

qbanlinxx said:
Have you tried this unbrick tutorial?
https://forum.xda-developers.com/on...k-unbrick-tutorial-oneplus-3t-t3515306/page41
Click to expand...
Click to collapse
Yes I did.

Have you used the unoffical OnePlus 3t toolkit?

Some details on how you ended up in this predicament might be useful to those trying to help.

OcazPrime said:
Have you used the unoffical OnePlus 3t toolkit?
Click to expand...
Click to collapse
Are you referring to MSMDownloadTool V 3.0?

Check this video https://youtu.be/jCgldi9Upes

I have uploaded a video. If someone can see and help me here https://youtu.be/jCgldi9Upes

Well since you have fastboot, why don't you try flashing stock recovery? Then you could flash a full rom zip from there if it worked. That or make sure you are using the right files for your device in the unbrick tool.
Edit: Nevermind. Your bootloader is locked so idk.
Edit2: Does your PC recognize the device as being in fastboot?
Sent from my OnePlus 3T using XDA Labs

Fastboot boot recovery "filename" (download recovery from oneplus)..
than flash latest full zip and reboot... (adb sideload "filename"
---------- Post added at 09:41 AM ---------- Previous post was at 09:38 AM ----------
http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3t.img

MrMeeseeks said:
Well since you have fastboot, why don't you try flashing stock recovery? Then you could flash a full rom zip from there if it worked. That or make sure you are using the right files for your device in the unbrick tool.
Edit: Nevermind. Your bootloader is locked so idk.
Edit2: Does your PC recognize the device as being in fastboot?
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Yes my laptop do recognize my phone while it is connected in fastboot mode

oTeMpLo said:
Fastboot boot recovery "filename" (download recovery from oneplus)..
than flash latest full zip and reboot... (adb sideload "filename"
---------- Post added at 09:41 AM ---------- Previous post was at 09:38 AM ----------
http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3t.img
Click to expand...
Click to collapse
C:\adb>fastboot boot recovery recovery_op3t.img
cannot load 'recovery': No such file or directory.
C:\adb>fastboot flash recovery recovery_op3t.img
target reported max download size of 442499072 bytes
sending 'recovery' (22605 KB)...
OKAY [ 0.741s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.765s

lukesh9923 said:
Yes my laptop do recognize my phone while it is connected in fastboot mode
Click to expand...
Click to collapse
Try fastboot oem unlock
Sent from my OnePlus 3T using XDA Labs

MrMeeseeks said:
Try fastboot oem unlock
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
C:\adb>fastboot oem unlock
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.016s
I have tried it before as well.

lukesh9923 said:
C:\adb>fastboot boot recovery recovery_op3t.img
cannot load 'recovery': No such file or directory.
C:\adb>fastboot flash recovery recovery_op3t.img
target reported max download size of 442499072 bytes
sending 'recovery' (22605 KB)...
OKAY [ 0.741s]
writing 'recovery'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.765s
Click to expand...
Click to collapse
Ups
Fastboot boot recovery_op3t.img
Sent from my ONEPLUS A3003 using Tapatalk

oTeMpLo said:
Ups
Fastboot boot recovery_op3t.img
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
C:\adb>Fastboot boot recovery_op3t.img
downloading 'boot.img'...
OKAY [ 0.727s]
booting...
FAILED (remote: unlock device to use this command)
finished. total time: 0.759s

How to lock bootloader?

Hello, i want to lock my bootloader but i can't. I tried with some fastboot commands but i get this error:
FAILED (remote: unknown command)
finished. total time: 0.004s
I have ZUI 11.1.021 ST Chinese ROM
Thanks in advance

jc9495 said:
Hello, i want to lock my bootloader but i can't. I tried with some fastboot commands but i get this error:
FAILED (remote: unknown command)
finished. total time: 0.004s
I have ZUI 11.1.021 ST Chinese ROM
Thanks in advance
Click to expand...
Click to collapse
hello can you tell me what commands you used?

i used "fastboot flashing lock"
then it pops up a confirmation dialog on the phone and once you accept it the boot loader locks.

metalspider said:
i used "fastboot flashing lock"
then it pops up a confirmation dialog on the phone and once you accept it the boot loader locks.
Click to expand...
Click to collapse
thanks:good::fingers-crossed:

I tried to lock my bootloader i download adb and fastboot and lenovo usb driver but no device found plsss help

I did this guide to lock the bootloader and install CN Rom zui10. then download and update to zui11 from there.
"forum.xda-developers.com/z5-pro-gt/how-to/guide-how-to-install-gsi-rom-treble-t3950283"
---------- Post added at 07:01 AM ---------- Previous post was at 06:53 AM ----------
pauloalbura said:
I did this guide to lock the bootloader and install CN Rom zui10. then download and update to zui11 from there.
"forum.xda-developers.com/z5-pro-gt/how-to/guide-how-to-install-gsi-rom-treble-t3950283"
Click to expand...
Click to collapse
wrong link. here's the correct one.
"forum.xda-developers.com/z5-pro-gt/how-to/guide-unbrick-guide-lenovo-z5-pro-gt-t3915945?spm=a2o4l.home.icms-5000630-1511774168247.1.239e6db4Kzq2Ou&fbclid=IwAR3kKJw0i3fcYqhmYem3Gf-zReG6qpXoAAUehm6au0RC1zAULuqQ222fFnY"

Question How do I unlock thw bootloader of Realme C25Y?

I know this is not the thread for it but I'll just put it here.
how do i unlock it? I've already tried the fastboot method by executing the command fastboot flashing unlock and fastboot oem unlock but it still doesn't unlock it; instead, it gives an error message.

adriangwapoz said:
I know this is not the thread for it but I'll just put it here.
how do i unlock it? I've already tried the fastboot method by executing the command fastboot flashing unlock and fastboot oem unlock but it still doesn't unlock it; instead, it gives an error message.
Click to expand...
Click to collapse
you need auth.bin to unlock the bootloader for unisoc based devices. dont ask me about the auth.bin because i dont have unisoc based device

gianonceu said:
you need auth.bin to unlock the bootloader for unisoc based devices. dont ask me about the auth.bin because i dont have unisoc based device
Click to expand...
Click to collapse
Yes but the problem with Realme devices is : We don't have fastboot

F-Google said:
Yes but the problem with Realme devices is : We don't have fastboot
Click to expand...
Click to collapse
fastbootd is always available, you can use that to unlock the device

gianonceu said:
fastbootd is always available, you can use that to unlock the device
Click to expand...
Click to collapse
fastbootd doesn't allow bootloader unlock

F-Google said:
fastbootd doesn't allow bootloader unlock
Click to expand...
Click to collapse
You may try this.
How to unlock Unisoc (SPD) bootloader using Identifier Token
This tutorial will explain how to unlock a Unisoc / Spreadtrum (SPD) Android device's bootloader using its Identifier Token. This guide is ideal for those who had tried the generic fastboot bootloader
www.hovatek.com

humayun.bd said:
You may try this.
How to unlock Unisoc (SPD) bootloader using Identifier Token
This tutorial will explain how to unlock a Unisoc / Spreadtrum (SPD) Android device's bootloader using its Identifier Token. This guide is ideal for those who had tried the generic fastboot bootloader
www.hovatek.com
Click to expand...
Click to collapse
but this method need fastboot

F-Google said:
but this method need fastboot
Click to expand...
Click to collapse
All the commands done to bootloader is through fastboot.

adriangwapoz said:
I know this is not the thread for it but I'll just put it here.
how do i unlock it? I've already tried the fastboot method by executing the command fastboot flashing unlock and fastboot oem unlock but it still doesn't unlock it; instead, it gives an error message.
Click to expand...
Click to collapse
I have an idea. what if you flash the realme C21Y(android 10,not 11) firmware on realme C25Y and then use realme deep testing tool. it's a longshot but there's no other way.

JA sunny said:
I have an idea. what if you flash the realme C21Y(android 10,not 11) firmware on realme C25Y and then use realme deep testing tool. it's a longshot but there's no other way.
Click to expand...
Click to collapse
you need to unlockn bootloader to change firmware

humayun.bd said:
All the commands done to bootloader is through fastboot.
Click to expand...
Click to collapse
fastbootd and bootloader are different. fastbootd is just here to flash some img. booloader only can allow modifications

F-Google said:
you need to unlockn bootloader to change firmware
Click to expand...
Click to collapse
Back to square one we are

Has anyone tried this method?

I tried this command:-
$ fastboot oem get_identifier_token
and got this:-
(bootloader) Identifier token:
(bootloader) 30303231364437303141323630393233
(bootloader) 313041413031424e
OKAY [ 0.022s]
Finished. Total time: 0.023s

JA sunny said:
I tried this command:-
$ fastboot oem get_identifier_token
and got this:-
(bootloader) Identifier token:
(bootloader) 30303231364437303141323630393233
(bootloader) 313041413031424e
OKAY [ 0.022s]
Finished. Total time: 0.023s
Click to expand...
Click to collapse
You could use windows?

JA sunny said:
I tried this command:-
$ fastboot oem get_identifier_token
and got this:-
(bootloader) Identifier token:
(bootloader) 30303231364437303141323630393233
(bootloader) 313041413031424e
OKAY [ 0.022s]
Finished. Total time: 0.023s
Click to expand...
Click to collapse
Did it unlock?

Andromix3345 said:
Did it unlock?
Click to expand...
Click to collapse
Try this
GSI bootloader and root

JA sunny said:
Try this
GSI bootloader and root
Click to expand...
Click to collapse
Thank you so much

Honor 9 lite with weird error wile booting: Func NO : 15 (bl31 image) |I Func NO : 1 (security verify failed!)

Hi,
First of all, I hope this is the correct place to ask for help. I didn't see a better place
I own a honor 9 lite phone. I opened bootloader using PotatoNV and testpoints. Everything worked like a charm
But yesterdayy I tried to update it to Treble and after flashing a rom, I faced this error just after restarting the phone:
ERROR MODE
Attention!
Please update system again
Error!
Func NO : 15 (bl31 image)
Func NO : 1 (security verify failed!)
And it keeps restarting all the time
I tried to flash system image from multiple roms, even stock. Also I tried to flash multiple recovery images, boot images, and so on.. but nothing seems to work
The only way I can use thee phone is via fastboot. NO TWRP and no OFFICIAL RECOVERY using Vol+ and Vol-
Please, I need you help
Thank you in advance
Regards

oloco2 said:
Hi,
First of all, I hope this is the correct place to ask for help. I didn't see a better place
I own a honor 9 lite phone. I opened bootloader using PotatoNV and testpoints. Everything worked like a charm
But yesterdayy I tried to update it to Treble and after flashing a rom, I faced this error just after restarting the phone:
ERROR MODE
Attention!
Please update system again
Error!
Func NO : 15 (bl31 image)
Func NO : 1 (security verify failed!)
And it keeps restarting all the time
I tried to flash system image from multiple roms, even stock. Also I tried to flash multiple recovery images, boot images, and so on.. but nothing seems to work
The only way I can use thee phone is via fastboot. NO TWRP and no OFFICIAL RECOVERY using Vol+ and Vol-
Please, I need you help
Thank you in advance
Regards
Click to expand...
Click to collapse
Hi,
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
Try something from the following:
A) in fastboot mode use command
fastboot erase userdata
reboot and try to flash stock recovery_ramdisk and flash full stock FW via dload
B) try to update your phone via eRecovery - turn off, plug the cabel and press and hold Power + Vol Up. In eRecovery's menu select "Download latest etc etc."
C) fully discharge the battery and try previous methods
(in your case little chance, this method works with error 11/2, you have 15/1)
D) use testpoint method
E) paid services (dc-phoenix etc.)

Thank so much for your help -Alf-
Unfortunally I have to say that now my phone is not able to enter fastboot mode.
What I dd:
The comands you asked for:
fastboot oem get-build-number
(bootloader) :System 8.0.0.046(0JRE)
OKAY [ 0.007s]
Finished. Total time: 0.009s
fastboot oem get-product-model
(bootloader)
OKAY [ 0.006s]
Finished. Total time: 0.009s
fastboot getvar vendorcountry
vendorcountry: hw/eu
fastboot oem oeminforead-CUSTOM_VERSION
FAILED (remote: 'The reason of failed input oem_nv_item error!')
fastboot: error: Command failed
fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :STF-L09C10B100a
OKAY [ 0.008s]
Finished. Total time: 0.009s
As nothing changed, I used testpoints.
I had to enter fastboot oem unlock 5KKK7... in order to unlock bootloader again
But now.. Phone keeps rebooting with the same eror window as before, but I'm still unable to ener not fastboot mode not erecovery.
Now i really feel locked, as I think there's nothin else I can do.
I also unplugged battery multiple times in order to discharge all the circuit, but no news...
Any other idea, please?
Regards

oloco2 said:
Unfortunally I have to say that now my phone is not able to enter fastboot mode
Click to expand...
Click to collapse
oloco2 said:
The only way I can use thee phone is via fastboot.
Click to expand...
Click to collapse
?

Before using potatonv I was able to enter fastoot mode and perform some commands.
Now, after using it, the phone just keeps rebooting showing the errors, but even if I press the buttons, no fastboot/twrp mode...

oloco2 said:
Before using potatonv I was able to enter fastoot mode and perform some commands.
Now, after using it, the phone just keeps rebooting showing the errors, but even if I press the buttons, no fastboot/twrp mode...
Click to expand...
Click to collapse
Try this method - turn off, hold Volume Down and plug the cabel.

oloco2 said:
System 8.0.0.046(0JRE
Click to expand...
Click to collapse
oloco2 said:
fastboot oem get-product-model
(bootloader)
OKAY [ 0.006s]
Click to expand...
Click to collapse
oloco2 said:
failed input oem_nv_item error
Click to expand...
Click to collapse
oloco2 said:
SYSTEM_VERSION
(bootloader) :STF-L09C10B100a
Click to expand...
Click to collapse
Testpoint or dc-phoenix, bro.

-Alf- said:
Testpoint or dc-phoenix, bro.
Click to expand...
Click to collapse
I posted in the previous post that I already used testpoint using potatonv.
I only used testpoint in order to unlock bootloader, and today I used it via potatonv because you seggested it but.... is there any other use I could give to testpoint other than unlocking bootloader? Something that couldhelp in this situation?
Regards

oloco2 said:
I posted in the previous post that I already used testpoint using potatonv.
I only used testpoint in order to unlock bootloader, and today I used it via potatonv because you seggested it but.... is there any other use I could give to testpoint other than unlocking bootloader? Something that couldhelp in this situation?
Regards
Click to expand...
Click to collapse
You have to flash board software using testpoint . Google it, I have no experience with that.

Ok. Thank you -Alf-. I will have a look to google.
But in the meanwhile, if someone else coukd help me a little bit, will be more than welcome
Regards!!

Hi -Alf-
I got good news for me. I got fastboot working again. I need to use potatonv in order to get it, but anywayI think it's good news.
Please, any other idea in order to make it come back, please?
Thank you

oloco2 said:
any other idea in order to make it come back,
Click to expand...
Click to collapse
your phone has an incomplete FW (System 8.0.0.046 (0JRE)),, an unknown model and a problem with oeminfo. Do you even read what I'm writing???
https://forum.xda-developers.com/t/...-security-verify-failed.4453855/post-86982695

Yes I read.
You told me to use testpoint or DC after telling you that I was unable to enter fastmode, but now I'm able to enter again. That's why I asked you for help again, because maybe using fastboot you were able to tell me any other way to test.
Regards

oloco2 said:
Yes I read.
You told me to use testpoint or DC after telling you that I was unable to enter fastmode, but now I'm able to enter again. That's why I asked you for help again, because maybe using fastboot you were able to tell me any other way to test.
Regards
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/i-bricked-my-honor-9-lite.3799176/post-76943641

Hey -Alf- !
I can ay that finally I got it working.
How I did it:
I got a full firmware for my devce and using Huawei Update extractor I extracted all the images to a folder.
Using a little script un batch I createda .txt with multiple lines:
fastboot flash cache cache.img
fastboot flash crc crc.img
fastboot flash curver curver.img
fastboot flash cust cust.img
fastboot flash dts dts.img
fastboot flash eng_system eng_system.img
fastboot flash eng_vendor eng_vendor.img
fastboot flash erecovery_kernel erecovery_kerne.img
fastboot flash erecovery_ramdis erecovery_ramdi.img
fastboot flash erecovery_vbmet erecovery_vbmet.img
fastboot flash erecovery_vendor erecovery_vendo.img
fastboot flash fastboot fastboot.img
fastboot flash fw_hifi fw_hifi.img
fastboot flash fw_lpm3 fw_lpm3.img
fastboot flash hisiufs_gpt hisiufs_gpt.img
fastboot flash boot kernel.img
fastboot flash modemnvm_update modemnvm_update.img
fastboot flash modem_fw modem_fw.img
fastboot flash odm odm.img
fastboot flash package_type.img package_type.img
fastboot flash patch patch.img
fastboot flash preas preas.img
fastboot flash preavs preavs.img
fastboot flash preload preload.img
fastboot flash product product.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash sensorhub sensorhub.img
fastboot flash sha256rsa sha256rsa.img
fastboot flash system system.img
fastboot flash teeos teeos.img
fastboot flash trustfirmware trustfirmware.img
fastboot flash userdata userdata.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
fastboot flash verlist verlist.img
fastboot flash version version.img
fastboot flash xloader xloader.img
And I run all the commands.
Some of them gave me some errors like partition lenght or something like that, but at the end, once rebooted, the error was gone.
Then, I updated all the firmware usong dload.
Now I'm facing a little error about oeminfo. I think itis due to the fact that the firmware I used was rusian, and my phone is from EU. I already created another thread in this forum.
I want to thank you for your tme and your ideas.
I hope this post can help someone over there with an error like mine.
Thank you very much for your time and help
Regards

No problem. Btw, why russian FW? I gave you a link with EU FW . Okay, your choice...
oloco2 said:
Now I'm facing a little error about oeminfo
Click to expand...
Click to collapse
Little?

Yes, The russian FW I flashed was yeterday. Now, after you replied to my post, I will try to upgrade FW to the EU version. I hope now everything works as it should
The "litle error" about oeminfo is:
"/preas/xxx" in some parts of the settings. I read somewhere it was due to oeminfo.I'm I wrong?
Thank you!!

I have already tried to fix the /preas/xxx "little error", but it didn't work
After flashing the EU version of lld-l31, I tested it and it seems to be showing the same error in "Compilation Number", in About
lso, in Model it says "unknow". I thing this is why when I tried to find a new OTA version, it didn't find anyone, even if using android 8
Any idea to fix "/preas/xxx"?
Thank you ad regards!!

All fixed!!
I found this oeminfo:
OEMinfo & Dump & CERT Honor 9 Lite (LLD-ALL)
OEMinfo & Dump & CERT Honor 9 Lite (LLD-AL00 / LLD-AL10 / LLD-AL20 / LLD-AL30 / LLD-TL00 / LLD-TL10 / LLD-L21 / LLD-L22 / LLD-L31 / LLD-L32 / LLD-L42). Share File Certificate, File Dump, OE…
azrom.net
After updating it, all info seems to be correct in about. Also, there's a new OTA for me!
What a road gave me this phone
I hope I'mnot comming back to here in a while
Thank you for all your help
Regards!!!

oloco2 said:
I have already tried to fix the /preas/xxx "little error", but it didn't work
After flashing the EU version of lld-l31, I tested it and it seems to be showing the same error in "Compilation Number", in About
lso, in Model it says "unknow". I thing this is why when I tried to find a new OTA version, it didn't find anyone, even if using android 8
Any idea to fix "/preas/xxx"?
Thank you ad regards!!
Click to expand...
Click to collapse
Kindly share your batch script, pls

Need Help - LLD-AL10 ........... Recovery Issue

I had installed LOS 8.1 on my phone with some chinese recovery few years back (may be 2018)......... working great.
Now i uninstalled Magisk ..............
Now I have Pretoria https://forum.xda-developers.com/t/...e-unofficial-twrp-3-2-1-0-12-05-2018.3789306/ installed .......... which is stuck on very first page.
i Want to reinstall MAgisk which needs TWRP
I have tried to flash new twrp in fastboot ........ but every time.......... error shows ............. command not allowed.
so guide me

kdark said:
command not allowed.
Click to expand...
Click to collapse
make sure you have both FRP and bootloader unlocked

-Alf- said:
make sure you have both FRP and bootloader unlocked
Click to expand...
Click to collapse
FRP is locked

how to revert to stock rom?

kdark said:
how to revert to stock rom?
Click to expand...
Click to collapse
A. Use eRecovery
B. Flash full stock FW using dload method

-Alf- said:
A. Use eRecovery
B. Flash full stock FW using dload method
Click to expand...
Click to collapse
i dont think erecovery is working bcoz twrp is flashed

kdark said:
twrp is flashed
Click to expand...
Click to collapse
How did you install it? Over Recovery or over eRecovery?

-Alf- said:
How did you install it? Over Recovery or over eRecovery?
Click to expand...
Click to collapse
dont remember coz it was in 2018........ but in erecovery ...... it only show reboot option

kdark said:
. it only show reboot option
Click to expand...
Click to collapse
I'm not sure I fully understand you... There is no Recovery or eRecovery which shows only one option.

-Alf- said:
I'm not sure I fully understand you... There is no Recovery or eRecovery which shows only one option.
Click to expand...
Click to collapse
if i boot to recovery from phone ........... it goes to TWRP {which is stuck} ........ otherwise erecovery shows only reboot option

-Alf- said:
I'm not sure I fully understand you... There is no Recovery or eRecovery which shows only one option.
Click to expand...
Click to collapse
give me fastboot commands to flash both twrp and erecovery

kdark said:
give me fastboot commands to flash both twrp and erecovery
Click to expand...
Click to collapse
maybe you meant to say "give me please"...
Google it.

-Alf- said:
maybe you meant to say "give me please"...
Google it.
Click to expand...
Click to collapse
plz

in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.

-Alf- said:
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
Click to expand...
Click to collapse
LLD-AL10 8.0.0.160(C675)
(bootloader) LLD-AL10
vendorcountry: hw/in
FAILED (remote: 'The reason of failed input oem_nv_item error!')
fastboot: error: Command failed
(bootloader) :LLD-AL10 8.0.0.160(C675CUSTC675D2)

FRP still locked?
Try to perform factory reset in fastboot mode, run command
fastboot erase userdata
Then try reboot TWRP and flash this file:
https://mega.nz/file/Q1dzQAqK#VGEZOvTalbDWow8epmN6ht7XNc9VH-4rapKtqU_3Y3A
FRP status will change to Unlock.