Related
Hello dear guru's =)
I have an HTC One international. Today i try to get root access and install custom recovery, whent i flash recovery i missed that chose a boot partition to install it. Now phone boots only into recovery, and from my PC, adb or fastboot don see it, but in usb devices its present.
Im on linux Ubuntu 13.04.
In phone dont have any backup.
The phone can't boot in bootloader?
Guich said:
The phone can't boot in bootloader?
Click to expand...
Click to collapse
When i chose from CWM recovery menu "Reboot recovery", phone boot into download mode, and thats all. Fastboot or adb dont see it.
But. In usb device list:
In download mode:
Bus 002 Device 061: ID 0bb4:0ff9 HTC (High Tech Computer Corp.) Desire / Desire HD / Hero / Thunderbolt (Charge Mode)
In recovery mode:
Bus 002 Device 063: ID 0bb4:0f91 HTC (High Tech Computer Corp.)
Assuming you didn't corrupt your boot loader you should be able to get at the boot loader and use fastboot to flash a new recovery.
Power the device off
Hold power and volume down, the phone should turn on and load into the boot loader.
From there you can select fastboot (navigate menu with volumn buttons, power button to select fastboot).
You can use this command to flash a recovery:
Code:
fastboot flash recovery recovery.img
If you can enter bootloader,you may try formatting partitions from fastboot,and flashing them afterwards,that is if bootloader is unlocked.
You can also lock your bootloader and try installing RUU,it will put your phone back to stock,
P.S. - I'm new to this,so please consult with more experienced members,before doing anything
ZloY909 said:
Hello dear guru's =)
I have an HTC One international. Today i try to get root access and install custom recovery, whent i flash recovery i missed that chose a boot partition to install it. Now phone boots only into recovery, and from my PC, adb or fastboot don see it, but in usb devices its present.
Im on linux Ubuntu 13.04.
In phone dont have any backup.
Click to expand...
Click to collapse
you "fastboot flash boot recovery.img"? you may want to check this thread: http://forum.xda-developers.com/showthread.php?t=2478438&page=3
if that doesn't help, post back
Guys, we have to check if he can boot in bootloader/fastboot.
So, @ZloY909, if you're in recovery, adb can recognize your phone?
And, in CWM, there is the option: reboot bootloader?
As download mode you mean bootloader?
ZloY909 said:
Has the same problem, flashed CWM Recovery to the boot partiotion. Can you give me more info about that magic what you are done to cennect your phone to fastboot? =)
Thanks.
Best Regards.
Click to expand...
Click to collapse
fastboot shouldn't be affected.
when you connect your phone to the PC, does it the text in bootloader change from "FASTBOOT" to "FASTBOOT USB"
Guich said:
Guys, we have to check if he can boot in bootloader/fastboot.
So, @ZloY909, if you're in recovery, adb can recognize your phone?
And, in CWM, there is the option: reboot bootloader?
As download mode you mean bootloader?
Click to expand...
Click to collapse
adb or fastboot is not recognize my phone. In cwm recovery i have only reboot option or reboot into recovery. I have the same situation as tha developer in other post.
when i chose boot to recovery i have : "screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds"
ZloY909 said:
adb or fastboot is not recognize my phone. In cwm recovery i have only reboot option or reboot into recovery. I have the same situation as tha developer in other post.
when i chose boot to recovery i have : "screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds"
Click to expand...
Click to collapse
"screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds" -> that's stock recovery
Before, when you are in bootloader (image attached), are you able to "fastboot devices" and it shows up? because the bootloader is not affected by the recovery.
basically "fastboot flash boot recovery.img" put the custom recovery where the kernel is supposed to be.
First thing you need to get/confirm working is bootloader/fastboot.
ZloY909 said:
adb or fastboot is not recognize my phone. In cwm recovery i have only reboot option or reboot into recovery. I have the same situation as tha developer in other post.
when i chose boot to recovery i have : "screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds"
Click to expand...
Click to collapse
In cwm adb will work.
So i think you have some issue with drivers.
And, however, if you turn off the phone, you can't access in bootloader with a longpress of power and vol-?
Hey, so I'm the one who had this same situation. What I had to do from what I recall is go to CWM screen, cleared the cache, even in advanced the davlik cache, then I believe (and you might have to try different combinations of this, because I don't 100% remember as I had before tried so many different ways) I unmounted the system mount, then went to reboot from the first screen to get to the bootloader (hold power button and volume down). After this, I clicked on Fastboot and it then went to Fastboot USB. This is where you should be able to connect. Don't leave this screen until you flash the recovery in the right place and then properly install the ROM. Let me know if you get to at least connecting and I can even send over an image for your boot, so you can at least get your phone back.
It can be done, I had the same situation so your phone is not bricked. Just keep working at it.
herrfricke said:
Hey, so I'm the one who had this same situation. What I had to do from what I recall is go to CWM screen, cleared the cache, even in advanced the davlik cache, then I believe (and you might have to try different combinations of this, because I don't 100% remember as I had before tried so many different ways) I unmounted the system mount, then went to reboot from the first screen to get to the bootloader (hold power button and volume down). After this, I clicked on Fastboot and it then went to Fastboot USB. This is where you should be able to connect. Don't leave this screen until you flash the recovery in the right place and then properly install the ROM. Let me know if you get to at least connecting and I can even send over an image for your boot, so you can at least get your phone back.
It can be done, I had the same situation so your phone is not bricked. Just keep working at it.
Click to expand...
Click to collapse
I will check this out. Thanks for your reply.
Now i reinstall to win8, reinstall drivers and adb.
Guich said:
In cwm adb will work.
So i think you have some issue with drivers.
And, however, if you turn off the phone, you can't access in bootloader with a longpress of power and vol-?
Click to expand...
Click to collapse
Thanks for your reply. This help me to get to the bootloader.
Now i try to flash boot.img into boot =)
Ok. I have working phone =)
Thanks for yours replies.
I have traied a few different recoveryies and fastboot and mfastboot, but I can not get any recovery to ACTUALLY flash to the phone.
It is a XT1053 running 4.4.4. Even when everything says it flashed fine, the recovery is still not there when i try to boot into it.
Any ideas?
Use the Vol+ button to select recovery, not power.
knitler said:
I have traied a few different recoveryies and fastboot and mfastboot, but I can not get any recovery to ACTUALLY flash to the phone.
It is a XT1053 running 4.4.4. Even when everything says it flashed fine, the recovery is still not there when i try to boot into it.
Any ideas?
Click to expand...
Click to collapse
What @nhizzat has said, is the most common mistake.
Beyond that, you don't mention if your bootloader is unlocked or not. I'm guessing it is, otherwise you should get some kind of error from fastboot/mfastboot on your PC.
One other thing that some have run into is... after flashing a recovery, having to reboot into bootloader before trying to enter recovery.... For example...
Start the phone in Fastboot/BootLoader mode and connect it to your PC.
open command prompt file and change to the folder your recovery IMG file resides in.
type the following, pressing enter after each command, and wait for it to finish before going onto the next...
mfastboot flash recovery recovery.img
mfastboot reboot-bootloader
Note: the recovery could be twrp.img, cwm.img, etc.
The device will reboot then display different BOOT OPTIONS
Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select it.
nhizzat said:
Use the Vol+ button to select recovery, not power.
Click to expand...
Click to collapse
I'm aware of that. I still have the stock Recovery.
KidJoe said:
What @nhizzat has said, is the most common mistake.
Beyond that, you don't mention if your bootloader is unlocked or not. I'm guessing it is, otherwise you should get some kind of error from fastboot/mfastboot on your PC.
One other thing that some have run into is... after flashing a recovery, having to reboot into bootloader before trying to enter recovery.... For example...
Start the phone in Fastboot/BootLoader mode and connect it to your PC.
open command prompt file and change to the folder your recovery IMG file resides in.
type the following, pressing enter after each command, and wait for it to finish before going onto the next...
mfastboot flash recovery recovery.img
mfastboot reboot-bootloader
Note: the recovery could be twrp.img, cwm.img, etc.
The device will reboot then display different BOOT OPTIONS
Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select it.
Click to expand...
Click to collapse
My thread title says its Unlocked, I will try rebooting to the bootloader first then trying recovery. I did not try that. I have been rebooting to the OS then rebooting to Recovery,
knitler said:
I'm aware of that. I still have the stock Recovery.
My thread title says its Unlocked, I will try rebooting to the bootloader first then trying recovery. I did not try that. I have been rebooting to the OS then rebooting to Recovery,
Click to expand...
Click to collapse
that is your issue right there after you flash a custom recovery you need to boot into the recovery before letting your phones boot into the OS.
if your phone boots into the OS then the recovery will not stick and you will be back on the stock recovery.
so
1.boot into bootloader
2.flash Custom recovery of your choice
3. make sure the phone does not boot into OS it can reboot back into bootloader and it can reboot into recovery with no issues but if it boots into the Phone OS then you will be back on stock recovery.
hope this helps enjoy
Hi
I see someone here have problems with bricked phone. It just keeps restarting and you cant even turn it off.
The problem is here that UPDATE never ended to 100% and software successfully changed boot.img to the new one
but with old system on the phone.
Its even worse if you have TWRP recovery installed before update then it will brick the phone too.
Allways install stock recovery on current rom before update firmware.
Ok i will start now with this guide because i had same problem and fixed it by myself.
I will not put any links to downloads find them self GOOGLE is your friend
First of all if you were on B200 5.0.1 version of android then you need B170 firmware to extract boot.img and recovery.img from
the UPDATE.APP file
For that you need a software called Huawei Firmware Extractor
Download it and install
Now you need even ADB/FASTBOOT on the computer. If you dont have download and install. Install even drivers for the phone
Now Open the Huawei Extractor and add the UPDATE.APP file.
Now you will see alot of files below
Now mark the boot.img system.img and recovery.img and extract them to the desktop of your PC
Now copy those files to the ADB/FASTBOOT folder.
You phone i still under the bootloop and you need to get it into FASTBOOT mode. Only way to do it is to plug in USB cable to the phone.
Now as soon the phone reboots by itself hold Power and Vol down button until you see white screen and fastboot mode
Now go to the ADB/FASTBOOT folder where you copyed files and hold shift and press right mouse button to get "Open command window here"
So you will be in fastboot and you will see C:/ADB that is right directory
Now start with fastboot erase cache
Then write fastboot flash boot boot.img and hit enter
When done do following fastboot flash recovery recovery.img and hit enter
You can if you want even try to flash system.img by writing fastboot flash system system.img or fastboot flash system.img dont remember that combination
but try and see wich works.
Now write fastboot rebootand phone will reboot . If you still have bootloop then as soon phone goes black then Hold Vol+up and Power until you see recovery.
Over there make factory reset and cache and then reboot.
If you still cant boot into recovery then you need to get Firmware B170 and put it on you SD card in DLOAD folder
to flash it from scratch. Same here is that you need to have USB plugged in in order to get to EMUI flash mode or it will wont work.
Remember that you only need UPDATE.APP in the DLOAD folder from B170 firmware.
I know my English sucks but im trying to help...
hello, i tried bouth solutions and i cant get my phone to boot up i dont now maybe i am doing something wrong i was on b200 rooted and twrp instaled an i updated to android 6 and i m stuck in bootloop you can help me with something i am out of ideas. thanks in advance
noraru said:
hello, i tried bouth solutions and i cant get my phone to boot up i dont now maybe i am doing something wrong i was on b200 rooted and twrp instaled an i updated to android 6 and i m stuck in bootloop you can help me with something i am out of ideas. thanks in advance
Click to expand...
Click to collapse
Yes, this is the your mistake
Never update firmware with instaled TWRP. First you need to flash to factory recovery then install the original firmware like B170(B200), then update to Marshmallow
Nevermind, fixed it.
sokkoban said:
Yes, this is the your mistake
Never update firmware with instaled TWRP. First you need to flash to factory recovery then install the original firmware like B170(B200), then update to Marshmallow
Click to expand...
Click to collapse
i know is my mistake , i flash recovery img from b170 but i cant get in to recovery mode anymore hao much i have to push the vol up+power buton? i only can boot in to fastboot
rndll said:
Nevermind, fixed it.
Click to expand...
Click to collapse
How please ?
TopperBG said:
How please ?
Click to expand...
Click to collapse
You don't flash img files through the recovery. Flash recovery.img, boot.img, system.img and cust.img manually through the fastboot screen (vol down + power) using either the windows command or mac terminal.
Thank you, at the moment I'm trying the same.
---------- Post added at 03:16 PM ---------- Previous post was at 03:12 PM ----------
rndll said:
You don't flash img files through the recovery. Flash recovery.img, boot.img, system.img and cust.img manually through the fastboot screen (vol down + power) using either the windows command or mac terminal.
Click to expand...
Click to collapse
Which firmware, I've tried with full B200 and extracted images, but no success. B170 ?
Don't have success, please give advices ?
1. I Download the B313 update and extract the boot.img and recovery.img from update.app using Huawei Firmware Extractor.
2. Connect your P8 to your PC/Mac. Hold down volume down + power just before you feel the vibration and the Huawei logo shows up. This will boot you to the Fastboot/Rescue screen.
3. Using the windows command prompt or mac terminal, flash the B313 recovery and boot images using Fastboot:
Code:
fastboot flash boot boot.img
Code:
fastboot flash recovery recovery.img
After flashing these, if you reboot normally, the bootloop should be gone but you will get stuck at the Huawei logo. However, you'll now be able to access recovery (volume up + power) and the 3 button update (vol up + vol down + power) modes.
You can now reboot either holding the power down or issue a fastboot command:
Code:
fastboot reboot
4. This may be optional and may not have any bearing but at this point I was ok with losing data just to get the phone booting again. Boot to the recovery (volume up + power) Yes, it's not that easy using the buttons. Just try it until you get the recovery to boot.
In recovery select Wipe data/factory reset and Wipe cache partition.
5. Download the B170 Full ROM and extract the dload and custom folder to your microSD. Use a card adapter/card reader.
6. IMPORTANT: Disconnect your P8 from your computer if it is still connected. Doing the next step while you're connected through USB will cause the update to get stuck at 90% and if you force a reboot, your device will bootloop again.
7. Reboot from the recovery and boot into the EMUI Updater using the 3-button method (volume up + volume down + power). Let the phone update and voila! You're back in business!
Confirm, it works!
@rndll bold and make red color B313
TopperBG said:
Confirm, it works!
@rndll bold and make red color B313
Click to expand...
Click to collapse
so it works , i have to gflash boot,cache and recovery img from b313?
I've interrupted update (B313), write to SD /dload full B200 and started Recovery. Update gone just fine and phone started with brand new B200. Even don't reset or wipe !
noraru said:
so it works , i have to gflash boot,cache and recovery img from b313?
Click to expand...
Click to collapse
You only need the boot and recovery images.
rndll said:
You only need the boot and recovery images.
Click to expand...
Click to collapse
thanks my friend it woooorks, my phone booted up at last, thank you very much you saved me i allready packed my phone to take it to the service you are great thanks again for your help.
noraru said:
thanks my friend it woooorks, my phone booted up at last, thank you very much you saved me i allready packed my phone to take it to the service you are great thanks again for your help.
Click to expand...
Click to collapse
You're welcome.
:good:
Hey TopperBG,
i'm in the same Bootloop as you described.
I tried every ROM I found on the internet but the combo with Vol Up + Vol Down + Power won't work. There ist always a fail after 1 % loading.
The second I tried was on fast boot. Problem im my boot loader is locked. So there is no chance for me to get something flashed.
Last option was your comment. I've loaded the B200 Rom on my SD-Card in /dload and tried (the second time) the Vol Up+Vol Down+ Power combo. No success. Then I tried just Vol Up+Power to get the Recovery mode as you described. But I have no chance to boot to recovery mode.
Do I forgot a step ??
Please help
Thanks
Flo
Tell me first what you've done when become to bloop ?
With boot and recovery from that ROM you must flash.
If you can forcibly start update (vol+ vol- power) you have a chance to update properly with update.app in /dload folder
I tried to update through local update on the Phone. But not with .zip. I tried the .app directly. Now i know it was the wrong Choice.
Flash with fastboot is no option for me because of the locked bootloader.
If I do the Force start with the new marshmallow rom (update.app) there is a warning that i'm using the wrong version for my phone.
Hello, I wanted to install TWRP and ROOT my phone. I flashed TWRP using adb terminal. But when I tried to boot into TWRP it was stuck on "Your device is booting now..". Then if I held the power button for few secs it rebooted normally. So I tried to google it and I found adb command that reboots to recovery
Code:
adb reboot recovery
. When I executed the command it rebooted to the "Your device is booting now.." screen and it stays like this forever. No button combination works to reboot the phone if i hold power button it reboots shows honor logo and then shows the "Your device is booting now.." screen. I waited for the battery to drain and then i put the phone on charger and when I tried to boot it, it was the same. Now when I try to reboot the phone it shows ultra low baterry symbol and then boots to "Your device..." screen.
NEM-L21; EMUI 5.0; 7.0 Nougat
Which twrp you flashed? Check the correct twrp in my signature for honor 5C repository.
TassiloBalbo said:
Hello, I wanted to install TWRP and ROOT my phone. I flashed TWRP using adb terminal. But when I tried to boot into TWRP it was stuck on "Your device is booting now..". Then if I held the power button for few secs it rebooted normally. So I tried to google it and I found adb command that reboots to recovery . When I executed the command it rebooted to the "Your device is booting now.." screen and it stays like this forever. No button combination works to reboot the phone if i hold power button it reboots shows honor logo and then shows the "Your device is booting now.." screen. I waited for the battery to drain and then i put the phone on charger and when I tried to boot it, it was the same. Now when I try to reboot the phone it shows ultra low baterry symbol and then boots to "Your device..." screen.
NEM-L21; EMUI 5.0; 7.0 Nougat
Click to expand...
Click to collapse
I think you have flashed wrong twrp.download correct twrp and flash it via adb fastboot
hassanjavaid8181 said:
I think you have flashed wrong twrp.download correct twrp and flash it via adb fastboot
Click to expand...
Click to collapse
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Crocni said:
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Click to expand...
Click to collapse
Meaning you can boot to fastboot but your pc doesn't recognise it?
Crocni said:
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Click to expand...
Click to collapse
Did you try all method to going in fastboot.by adb fastboot command or by pressing vol- and power button?
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Crocni said:
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Click to expand...
Click to collapse
Glad that you fix your device.
If it is not bothering you let it be and enjoy using your phone.
Crocni said:
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Click to expand...
Click to collapse
Can you please explain to me how did you managed to boot into fastboot? I tried waiting for the battery to drain completely. Now I can't fully charge my phone. When i connect it with charger. It starts normally charging like it would with 0% battery then after a few moments the honor logo shows up and then the screen "Your device.." shows. When I try vol- and powerbutton it vibrates and shows the red lightbolt then after few moments it boots the same way into the your device screen. When I connect it to the pc it doesn't react. I don't even hear the classic windows beep sound.
TassiloBalbo said:
Can you please explain to me how did you managed to boot into fastboot? I tried waiting for the battery to drain completely. Now I can't fully charge my phone. When i connect it with charger. It starts normally charging like it would with 0% battery then after a few moments the honor logo shows up and then the screen "Your device.." shows. When I try vol- and powerbutton it vibrates and shows the red lightbolt then after few moments it boots the same way into the your device screen. When I connect it to the pc it doesn't react. I don't even hear the classic windows beep sound.
Click to expand...
Click to collapse
Try removing the usb cable and then try to biot to fastboot. What about erecovery
shashank1320 said:
Try removing the usb cable and then try to biot to fastboot. What about erecovery
Click to expand...
Click to collapse
When I remove the usb cable it's still the same. When i try to press the power button it vibrates shows the low battery red lightbolt and dies. If you mean by erecovery emui recovery, then it looks like it's not installed.
TassiloBalbo said:
When I remove the usb cable it's still the same. When i try to press the power button it vibrates shows the low battery red lightbolt and dies. If you mean by erecovery emui recovery, then it looks like it's not installed.
Click to expand...
Click to collapse
You need to press power + volume down key to boot into fastboot. Keep trying 4-5 times sometimes it takes due to wrong press
shashank1320 said:
You need to press power + volume down key to boot into fastboot. Keep trying 4-5 times sometimes it takes due to wrong press
Click to expand...
Click to collapse
So I managed to get into the fastboot. Where can I get boot.img, recovery.img and system.img? I have downloaded some update.zip files from this russian site (first 5) http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=NEM-L21&firmware_page=0. But I don't have boot, recovery and system images in these zips.
I also tried reboot in fastboot but its still the same:
fastboot devices
8SC4C16A13006909 fastboot
fastboot reboot
rebooting...
finished. total time: 0.026s[/CODE]
TassiloBalbo said:
So I managed to get into the fastboot. Where can I get boot.img, recovery.img and system.img? I have downloaded some update.zip files from this russian site (first 5) http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=NEM-L21&firmware_page=0. But I don't have boot, recovery and system images in these zips.
I also tried reboot in fastboot but its still the same:
fastboot devices
8SC4C16A13006909 fastboot
fastboot reboot
rebooting...
finished. total time: 0.026s[/CODE]
Click to expand...
Click to collapse
Meaning the fastboot is accessible.
Now you have firmware zip, extract it amd you will get few files. Use dload method as given in my signature and you are good to go.
Else use Huawei extractor and browse to update.app you just got in above downloaded zip. You will get boot, recovery, system img you need.
I downloaded some firmware versions and extracted them. I don't know which is for my device. So I tried one of them. I flashed boot.img and recovery.img but I din't flashed the system.img, becouse it was too big. When I tried to reboot the phone it was the same. The fastboot was no longer accessible. I put the phone into servis but they didn't fixed it. it's the same but I can enter erecovery
TassiloBalbo said:
I downloaded some firmware versions and extracted them. I don't know which is for my device. So I tried one of them. I flashed boot.img and recovery.img but I din't flashed the system.img, becouse it was too big. When I tried to reboot the phone it was the same. The fastboot was no longer accessible. I put the phone into servis but they didn't fixed it. it's the same but I can enter erecovery
Click to expand...
Click to collapse
Please flash only files for your device and nothing else. Did you try dload method?
Give me model and build number, will get the correct files for you
shashank1320 said:
Please flash only files for your device and nothing else. Did you try dload method?
Give me model and build number, will get the correct files for you
Click to expand...
Click to collapse
NEM-L31 but I don't know the build number
TassiloBalbo said:
NEM-L31 but I don't know the build number
Click to expand...
Click to collapse
Build number is necessary to get right files..
hassanjavaid8181 said:
Build number is necessary to get right files..
Click to expand...
Click to collapse
I know. So do you think it's dead?
TassiloBalbo said:
I know. So do you think it's dead?
Click to expand...
Click to collapse
You should try huawei service center....
So i accidentally flashed a magisk zip file to my p20 using a program called "TOOL ALL IN ONE" AS a recovery it showed that the process was completed but when i wanted to boot to fastboot it just shows that my phone is booting, same thing with recovery mod.
so basically i need a software that can let me install any recovery or repair my fastboot status as I am no longer capable of doing anything.
have you tried flashing it in ADB? i mean most of these tools are nice but when you type in the commands in adb to get things done then you will understand more and more about how everything works.
Eclipse.0 said:
So i accidentally flashed a magisk zip file to my p20 using a program called "TOOL ALL IN ONE" AS a recovery it showed that the process was completed but when i wanted to boot to fastboot it just shows that my phone is booting, same thing with recovery mod.
so basically i need a software that can let me install any recovery or repair my fastboot status as I am no longer capable of doing anything.
Click to expand...
Click to collapse
Did you solve this? I'm on the same situation. no recovery no fastboot!
Turn off your phone then press and hold power down button and don't press or hold nothing more. Hold power down and at same time connect your phone by USB to pc. Whoa, you are in a bootloader. It helped for me. Then you can reflash recovery and all will work again.