Related
I got my case in the mail about two weeks ago. Full disclosure: I recieved it as a free promo, on the condition that I review it. I am not the type to give a positive review to a product I don't care for, as this post shows: http://forum.xda-developers.com/showpost.php?p=62637305&postcount=73
OK, here we go. Case looks good. Not a big fan of gold, but it's not really that important to me. I get why others are saying that the plastic is kind of cheap looking and has a visible seam. But that's only when inspected really closely. From a normal, reasonable distance (like that of everyday use), it looks just fine. I even got a couple of compliments on the case today, and I wasn't even showing it to anyone, juat taking it out of or putting it back into my pocket. It has a very modern, almost high-tech look that is admittedly somewhat cheapened by the gold plastic, but that is quickly gotten over. The rubber back has a nice ridged texture, which feels pleasant and grippy in the hand.
It's kind of hard to talk about function or form independent from each other with this case. It seems like a lot of thought went into both aspects during design, as well as how they could compliment each other. For example, the case is slim and adds no appreciable bulk. It also has curved sides that hug the contours of the phone better than my Otterbox Commuter did. I like the Commuter a lot, but between the non-slippery ridged rubber back, the curved edges and the overall thinness of the Artech, it just feels better in the hand. Its more comfortable to hold and I feel like I have a better grip on it. The slim profile of the case makes it very comfortable in a pocket as well.
The phone pops into the case in a single piece. It went in easily, but there are instructions in case you need them. I was a little worried that it might pop out as easily as it popped in. But after slamming the phone hard against my palm several times, it didn't budge. Even when I cupped my palm in an effort to put more stress on the side of the case to purposely get it to pop out. It has a nice, snug fit. There is a nice raised lip around the screen, even with a tempered glass screen protector.
As another poster noted, there is a nice bezel next to the heart rate monitor on the back of the phone that makes it easy to reach. But overall, the camera hole is smaller than my other case. So I feel that the Artech offers better camera protection without interfering with function. This same type of design is noticeable below the home button, where the lip of the case flattens out for more comfortable access. It is obvious that some thought went into this design.
Despite the back being ridged rubber that hugs the palm, the fact that there are a couple of ever so slightly raised plastic parts on the back means that this effect is, regrettably not useful on a table or other flat surface. It can slide on its plastic parts rather than being anchored by the rubber. It feels a little like a missed opportunity, but not a deal breaker.
The buttons and all of the holes for the various ports line up perfectly. The battery and headphone jacks are exposed, which I don't necessarily like, but can live with. There is a rather large opening for the s pen, but flat surfaces will touch both sides of the case without coming into contact with that part of the device. Further proof that there is a deliberate and thoughtful design here.
The rubber on the back and on the inside of the case seems kind of thin, but is a bit nore rigid than my other case. The power and volume buttons are responsive and soft. They are not very "clicky", of that kind of thing is important to you. It is not important to me, and I like the feel of these buttons.
A good 3/4 of the back is the aforementioned ridged rubber. I'm not sure how much protection it would really offer in the event of a decent drop. Again, I am conparing it to the Otterbox Commuter, which has a plastic over rubber back. One way to find out, which I don't plan on trying anytime soon. But it seems solid enough. There is some ridged pattern on the inside of the case, but I don't know if that is decorative or not. It's not symmetrical, so I think it probably is. In any event, the slightly raised plastic bits on the back look like they would prevent the back of the phone from actually coming into contact with the ground (covered in rubber or no) as the result of a flat drop. But that is just speculation on my part.
In conclusion, i would say that this is a very nice case, a few minor quibbles aside. It's got a nice blend of form and function not often seen in phone cases. It looks and feels good, and the functionality is excellent in my opinion.
For the asking price (I got it free, but you know what I mean), it is definitely nice. I only buy Otterboxes because I get them at a significant discount which puts them in the same price range as the Artech. So if I had to buy one or the other of these, it would be hard to choose (unless the Commuter was full price, in which case it would be Artech hands down because it is a good case and also I'm a tightwad). The Artech looks and especially feels way better, is easier to hold securely, and very comfortable. As far as protection, both seem comparable, but I would give a slight to moderate edge to the Otterbox commuter because of the covered ports and plastic over rubber back. But, make no mistake: the Artech Slim Stylish case seems to offer good, solid phone protection. And I'm in no hurry to go back to my other case. I'm gonna go ahead and use this one for a while.
I would definitely recommend this case to anyone looking for a sleek, yet protective case that feels good to hold.
This is an updated version of a post I made in someone else's thread about this same case. I wanted to make it its own thread and add pictures. After two weeks, my feelings about the case are the same as when I first got it. All in all, I am very satisfied with this case.
good review , and no angry pitch
choetech-official said:
good review , and no angry pitch
Click to expand...
Click to collapse
contact me if you can
Full disclosure: I was given this case for free, the vendor is seeking reviews. But, as I've said before, I will give an honest review of a free product regardless. People's feelings be darned.
Product arrived in a timely manner. Packaging was plain, I'm assuming it was non-retail. There were no markings or branding of any kind. No instructions, either. Not that they were really needed I guess, but I would assume that a retail purchase would be packaged, and not arrive in a plain padded envelope.
The case by itself looks, well, clear. Mine is clear with opaque rubber (TPU, Poetic calls it). I guess a model with black TPU is available. I don't want to sound like I'm bashing the case, because I'm not, but it is kind of unremarkable to look at. And I don't think that's a bad thing. After all, this case is designed to show off the phone, not just to show off. And that is apparent when it's actually on the phone. It hugs the shape of the device and doesn't compete for your attention.
The case is made of rigid plastic. Normally, I'm not a huge fan of hard cases, as I feel they can be rough on phones. But, the note 5 has an aluminum frame instead of the Standard issue Samsung chromed plastic. And there is clearish rubber around the frame as well as the lip that goes over the screen. It is along the sides as well. That made me feel better about it being a rigid plastic.
The case is one piece that pops in firmly but easily enough. Let me tell you, this baby is snug! And I mean that in a good way. Takes a little doing to get it out once it's in (again, I hope the retail packaging has instructions, in case there's some "trick" to it). But this thing really hugs the phone tightly. Solid fit. There is a very thin lip over and around the merest edge of the screen which holds the case on. It's a pretty impressive design, because the case basically clips onto the aluminum frame, leaving the entirety of the screen exposed. But there is no fear of the phone popping out of this case.
There is a slight lip that keeps the screen from coming in contact with the table when placed face down. A slight lip, but it is there, even with a glass screen protector on my phone.
It's made of clear polycarbonate with a clearish TPU on the corners, around the screen and in two raised rails running the long way down the back. It is comfortable in the hand, allowing the holder to feel the contours of the phone without adding bulk.
Along the sides, there are upraised ridges for grip. Which is good, because the smooth polycarbonate could feel a bit slippy if not for the TPU rails on the back, rubber around the lip of the case and ridges on the sides. This case has a good, reasonably grippy feel. Those who do not like the feel of smooth plastic against their palm may not dig it, but it feels pretty good to me.
The buttons are perfectly lined up, and very very clicky. One cool thing about the volume buttons: instead of being one big rocker style button for VOL up/down (many cases "join" the two buttons), the Poetic Affinity case keeps them separated just as the phone was designed. It looks sharp and deliberate, and provides some useful tactile feedback.
The TPU around the frame and the rails along the back ensure that your phone will stay put wherever you set it, which is nice.
The ports are almost all lined up perfectly (more on that in a sec). The SPen port seems wide open, which is pretty common for cases of this type. The bottom speaker, instead of being a cutout, is 8 holes drilled or molded or whatever into the case. They don't really line up with the actual speaker holes (at least in mine). But I have tried with and without the case, and I cannot tell any difference in the sound, so it doesn't seem to be a big deal. It isn't to me, anyway. But it will be to someone, which is really the only reason I mention it.
The clear polycarbonate gets smudged up with fingerprints in no time, I wipe mine frequently.
The combination of polycarbonate and strategically placed TPU seems pretty sturdy. I feel like my phone is adequately protected against day to day hazards. The case feels solid, complete and protective. The placement of the TPU seems designed to protect well against average corner drops or flat drops onto the front or back.
In conclusion, if you want a phone case that protects you from everyday hazards, and showcases as it encases, this is a good one to comsider. It is not at all expensive, and seems to offer protection that is definitely a cut above most "budget" cases I have seen. I have mentioned a couple of things that may give some people misgivings about this product (smooth plastic back, misaligned speaker holes), but for me neither of these things is a deal breaker, or even a significant concern. Your mileage may vary, etc. I like this case quite a bit.
Did we really yet another separate thread for this? You could have added it here: http://forum.xda-developers.com/showthread.php?t=3220298
Mods please merge these threads.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Yeah I didnt see that thread sorry all
I have noticed that the TPU gets a little dingy looking and is not easy to clean. I can't imagine that would be a problem with the black TPU, but I have the opaque TPU on mine. Still love the case, still using it, but if I were buying one, I would go with the black TPU.
Just got my poetic affinity case. It's very nice! Love it
I’ve just received a load of Samsung Galaxy Note 8 cases and I figured that I would do a roundup of my favourites considering the Note 8 release is just around the corner! Please add any cases to this post that you also like the look of or have received in advance of the Note 8 release! All of these photos were taken with the OnePlus 5 which I thought did a pretty good job - that might be for another post though
1. Olixar Sentinel - This is a really stylish looking case and blends in perfectly with the phone so that you can barely tell it’s there. It is easy to grip and feels really nice to hold thanks to the brushed metal finish. It’s not quite the level of protection that you get from some armoured cases but I’m certain that it would do the job if you dropped the phone. Best of all though…. You get a free tempered glass screen protector with it that fits the phone with the case on. That’s all bases covered!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Ringke Air Prism - I thought I’d add something a bit different for number 2 and maybe a little more fashionable (I know absolutely nothing about fashion!). This case is all about the looks with it’s glittery, kaleidoscope style, it really catches your eye! It fits the phone snugly and otherwise feels like any other premium TPU case - so soft to the touch, light and durable.
3. Olixar X-Tome Book Case - I know a lot of people enjoy leather wallet cases so I thought that I’d add this one as it has an interesting look to it… It essentially looks like a book if you couldn’t already tell, which I thought was pretty cool. This case feels premium with its leather finish and has card pockets on the inside and also opens out to let you stand the phone landscape and watch movies. So if you have an empty space on your bookshelf… I guess this could fill it… Pretty random thing to have I guess. Anyway this case does the job when it comes to dropping your phone and as it’s a magnetic wallet phone it protects your screen nicely.
4. Ringke Slim Case - I loved this one because it’s nice and easy to take in and out of your pocket, it’s very solid so you feel safe even when dropping your phone and its has pockets to hold your cards - although with android pay I suppose that isn’t entirely necessary anymore… Still a very sleek looking case! (FYI - you have to buy the card holding segment separetly!)
I know I’ve only got two brands on this list but never fear! If I get more cases (I’m hoping for Samsung and Spigen cases) I will add them to this list if I think they’re up to much.
zedexdriver98 said:
I’ve just received a load of Samsung Galaxy Note 8 cases and I figured that I would do a roundup of my favourites considering the Note 8 release is just around the corner! Please add any cases to this post that you also like the look of or have received in advance of the Note 8 release! All of these photos were taken with the OnePlus 5 which I thought did a pretty good job - that might be for another post though
1. Olixar Sentinel - This is a really stylish looking case and blends in perfectly with the phone so that you can barely tell it’s there. It is easy to grip and feels really nice to hold thanks to the brushed metal finish. It’s not quite the level of protection that you get from some armoured cases but I’m certain that it would do the job if you dropped the phone. Best of all though…. You get a free tempered glass screen protector with it that fits the phone with the case on. That’s all bases covered!
2. Ringke Air Prism - I thought I’d add something a bit different for number 2 and maybe a little more fashionable (I know absolutely nothing about fashion!). This case is all about the looks with it’s glittery, kaleidoscope style, it really catches your eye! It fits the phone snugly and otherwise feels like any other premium TPU case - so soft to the touch, light and durable.
3. Olixar X-Tome Book Case - I know a lot of people enjoy leather wallet cases so I thought that I’d add this one as it has an interesting look to it… It essentially looks like a book if you couldn’t already tell, which I thought was pretty cool. This case feels premium with its leather finish and has card pockets on the inside and also opens out to let you stand the phone landscape and watch movies. So if you have an empty space on your bookshelf… I guess this could fill it… Pretty random thing to have I guess. Anyway this case does the job when it comes to dropping your phone and as it’s a magnetic wallet phone it protects your screen nicely.
4. Ringke Slim Case - I loved this one because it’s nice and easy to take in and out of your pocket, it’s very solid so you feel safe even when dropping your phone and its has pockets to hold your cards - although with android pay I suppose that isn’t entirely necessary anymore… Still a very sleek looking case! (FYI - you have to buy the card holding segment separetly!)
I know I’ve only got two brands on this list but never fear! If I get more cases (I’m hoping for Samsung and Spigen cases) I will add them to this list if I think they’re up to much.
Click to expand...
Click to collapse
This are really awesome cases.
A few days back, I was looking for a case for my new Samsung Galaxy Note 8. But with plenty of brands available in the market, I got a bit confused on choosing the perfect one for my device. Then I found my solution on amazon. These folks are having an amazing collection of some of the best Galaxy Note 8 cases.
I needed something compatible with the Dome Glass. I went with the Tech21 EVO tactical. So far it's great case.
Double post...
Mike02z said:
I needed something compatible with the Dome Glass. I went with the Tech21 EVO tactical. So far it's great case.
Click to expand...
Click to collapse
Would you mind sharing a side view shot of the case with the Note 8 in it? I'm wondering about the thickness of the lip. I'm still not sure what rugged case I'll eventually go with. I'm torn between the Tech21 EVO tactical, the UAG Monarch, the Samsung Rugged and the Otterbox Commuter. Definitely would appreciate more feedback on the tactical if you are so inclined to share.
Look at patchworks cases. Slim enough with good protection well made and great price
Sent from my SM-G935W8 using Tapatalk
For me, I have always used Piel Frama cases with my previous devices, although they have yet to release cases for Note8, these are the best cases available for smartphone devices in my opinion, though expensive.
Sent from my SM-N950F using Tapatalk
I have the Alcantara case and the UAG Monarch case coming, just waiting on Amazon. I will use the spigen crystal clear case cause it was only one available when I order. That was 2 weeks ago.
Sent from my S7 Edge using XDA Labs
I personally love the Spigen Tough Armor cases the most. Had them on my Note 4, short-lived Note 7 and now my Note 8.
I've been using UAG cases for as long as I can remember, I wouldn't even consider something else when there's a UAG available. Best quality, best protection, coolest looks by far.
After the sweet trade in deals, I figure everyone should be keeping their phones in good condition. I used to go naked, but now a case seems worth the minimal investment. Here are some from my S7Edge and Note 8...
(Quick edit: All these cases were compatible with every wireless charger I own, and none of those chargers were particularly high end.)
Spigen Thin Armor (S7Edge)
- Nice dual layer setup.
- Outer shell scuffed relatively easily, showing the white inner plastic.
- More slippery hard shell than I would have liked, though not terrible by any means. Problem made worse by the slight bow in case, so just the slippery, hard section makes contact with the surface.
- There was a decent lip.
- Not too bulky, but a good, dense feeling.
- Kick stand was a joke. Flimsy plastic that could easily pop off, failed to hold the phone up, and wore down after a couple months. Also detracts from the clean look by being a different color and sporting a massive branding label.
- Good button responsiveness.
- Good camera protection.
- - Overall: Good overall quality and great compromise between size and protection, but questionable longevity and middle of the road looks.
Generic clear soft flexible (TPU) cases (S7Edge, 3 different brands)
- They all discolor, though it is most noticeable along the edges, presumably because you're looking through more material in those areas.
- Fine for backup or limited use.
- Looked bad.
- Button areas would become deformed slightly and eventually not line up correctly (on all of them).
- Minimal protection, almost no lip.
- - Overall: Fine for backup or if you need something phone sized for a small project. Otherwise, very underwhelming.
Caseology Legion Series (Note 8)
- Very solid, 2 layer system with quality in line with the Spigen case above.
- Cut outs roomy, except for the headphone cutout, which might be a bit tight (will not fit right angled 3.5 mm plugs). SPen cut out is very well spaced. Speaker cut out is deep, so accidentally completely blocking the sound is almost impossible.
- Adds noticeable bulk, especially to the sides. Makes it look like a few mm of bezel around the screen.
- Generous lip, with raised edges on the back as well. The edges are from the softer part, to the phone doesn't slide when set down on a slightly angled surface.
- Good camera protection, but glossy material is hard to distinguish from the fingerprint sensor. Also, unlike some cases, which have an asymmetrical camera area that's supposed to help you feel the sensor, the camera area is symmetrical.
- Appearance is very clean, angled, and monolithic. No busy patterns and compliments the phone nicely. And tiny, tiny branding icon that doesn't diminish the looks.
- Buttons a little stiffer than other cases, which can be a good thing (yet to accidentally push any).
- Worthwhile mod: Drill or cut out a little of the headphone jack area.
- Possible 2nd mod: Patch the speaker area with Sugru and carve out a front facing sound notch, so that sound if reflected forward.
- - Overall: This case is more on the 'protection side' than the 'slim side' of the scale, but it still looks good. It's bulkier than the Spigen (based on the S7E version), but offers better protection, especially around the edges. I don't like the bulk it adds for everyday use, but it would be my go to for longer trips, like relaxing vacations. Probably NOT rugged enough for more adventurous hikes, but not too far off if you added front protection. Definitely provides peace of mind and won't look out of place in a more formal scene.
Ringke Fusion clear, black edge TPU (Note 8)
- A little more firm than the super cheap TPU cases I had on the S7E.
- For TPU, the more firm, the more slippery, definitely the case here. It's smooooooth (which also means fingerprints galore).
- The colored edge will diminish any yellowing, which I have noticed none of. I've had it out on a desk next to the window, so plenty of sun for the last 2.5 weeks.
- Cut out are all accurate and roomy.
- Surprisingly good top and bottom lips.
- Much thinner sides, feel like they may deform over time/with use.
- Just the addition of that black coloring on the edge makes it a night and day difference from the soft TPU cases I had on the S7E. Also, no branding.
- So thin that it actually looks like part of the phone.
- Possible mod: Might sandpaper the outside surface to add a frosted effect and some grip.
- - Overall: If you like the way the phone looks without a case, this is probably as close as you can get. But, the protection is pretty minimal. Fine for basic protection.
I have the Poetic Nubuck and YFWOOD real wood case coming in the next 2 weeks, so I'll update this soon..
xbkingx said:
Caseology Legion Series (Note 8)
- Very solid, 2 layer system with quality in line with the Spigen case above.
- Cut outs roomy, except for the headphone cutout, which might be a bit tight (will not fit right angled 3.5 mm plugs). SPen cut out is very well spaced. Speaker cut out is deep, so accidentally completely blocking the sound is almost impossible.
- Adds noticeable bulk, especially to the sides. Makes it look like a few mm of bezel around the screen.
- Generous lip, with raised edges on the back as well. The edges are from the softer part, to the phone doesn't slide when set down on a slightly angled surface.
- Good camera protection, but glossy material is hard to distinguish from the fingerprint sensor. Also, unlike some cases, which have an asymmetrical camera area that's supposed to help you feel the sensor, the camera area is symmetrical.
- Appearance is very clean, angled, and monolithic. No busy patterns and compliments the phone nicely. And tiny, tiny branding icon that doesn't diminish the looks.
- Buttons a little stiffer than other cases, which can be a good thing (yet to accidentally push any).
- Worthwhile mod: Drill or cut out a little of the headphone jack area.
- Possible 2nd mod: Patch the speaker area with Sugru and carve out a front facing sound notch, so that sound if reflected forward.
- - Overall: This case is more on the 'protection side' than the 'slim side' of the scale, but it still looks good. It's bulkier than the Spigen (based on the S7E version), but offers better protection, especially around the edges. I don't like the bulk it adds for everyday use, but it would be my go to for longer trips, like relaxing vacations. Probably NOT rugged enough for more adventurous hikes, but not too far off if you added front protection. Definitely provides peace of mind and won't look out of place in a more formal scene.
Click to expand...
Click to collapse
I appreciate the feedback on the Legion. I don't intend to use a tempered glass screen protector, and I was wondering whether you think the lip would protect against minor flat face down falls.
KBeckett said:
I appreciate the feedback on the Legion. I don't intend to use a tempered glass screen protector, and I was wondering whether you think the lip would protect against minor flat face down falls.
Click to expand...
Click to collapse
No problem. Glad I could help.
I think it would. The lip is right on the border of being attention-grabbing big, so any bigger and you should be looking at a case marketed primarily for ruggedness (military specced, 'rugged' in the name, etc.). It won't take a fall from the 5th floor of a building onto concrete, but a drop from the nightstand or a pocket should be no problem. Take a look for yourself: https://youtu.be/5TAOmprTsk0?t=8m2s
MINIMALIST - A case made for those who love minimal design
This is the thinnest case in the world https://mnmlcase.com/products/samsung-galaxy-note-8
MINIMALIST - A case made for those who love minimal design. No branding and unnecessary clutter.
UNREAL THIN - Do you know what 0.35mm looks like? I didn’t think so. It’s barely noticeable!
PERFECT CUTOUTS - The case fits your Galaxy Note 8 like a glove, exposed buttons and ports are perfectly cut giving you full easy access. The camera cutout has a raised bump to protect your camera on surfaces. The front of the case has a raised rim to protect your phone’s screen from scratching.
NO FINGERPRINTS - Covered in a fine, matte texture which feels terrific and, unlike glossy plastic Galaxy Note 8 cases, effectively repels fingerprints and dirt.
I looked for cases, and screen protectors for a long while, and I ended up getting a Zizo Bolt because it came with the case, and a screen protector on sale for $18 with free shipping. I haven't really seen a lot about the case, or screen protector, but I bit the bullet, and got it anyways. The biggest complaint everyone has with the car is the buttons are stiff. I agree, but you can still press them as long as you give it more strength and an under fed toddler. I can even do the power button double tap to get to the camera without issues. As for the screen protector, the installation was very simple, the glass is very responsive and smooth, and I can use the phone as if there is no screen protector. The only issue is it collects fingerprints like they're going out of style. However, I can wipe the screen a few times with little effort with my shirt, and no more fingerprints. I was wondering if anyone else has used the Zizo Bolt before, and how well you like(d) it. I do miss my UAG case, but I was trying to keep the cost as low as possible for the screen protector, and case. This was the best deal in my opinion.
xbkingx said:
No problem. Glad I could help.
I think it would. The lip is right on the border of being attention-grabbing big, so any bigger and you should be looking at a case marketed primarily for ruggedness (military specced, 'rugged' in the name, etc.). It won't take a fall from the 5th floor of a building onto concrete, but a drop from the nightstand or a pocket should be no problem. Take a look for yourself: https://youtu.be/5TAOmprTsk0?t=8m2s
Click to expand...
Click to collapse
That's great to hear.
Thanks so much for the feedback; it's greatly appreciated.
Personally, I love the Spigen Liquid Crystal cases - doesn't detract from the design of the phone, slim, pliable, protected my S7 for the last nearly-2 years, and now protecting my Note 8. Leaves plenty of space for ports and S-Pen, buttons protected but responsive, little lip to protect the screen from drops.
Following up on my last post, got the Poetic Nubuck and YFWOOD real wood cases.
Poetic Nuback (2 card pocket, Note 8)
- Very nice material quality. Top portion has a plush, fabric, alcantara feel. Bottom portion is a soft faux leather, but not that slippery cheap stuff. Internal surface is hard plastic with no cushioning pattern or soft materials.
- Room for 2-3 cards, maybe even a few bills.
- Uses a flat piece of cord/fabric string to remove cards: Inserting card pushes the string down into the pocket, pull the tab on the string to remove the cards. The down side to this is that there's no easy way to tuck the string in if you don't want to add any cards. The pocket is too tight to feed the string in and balling it up adds an annoying lump. This is usually handled with a piece of elastic attached from the inside bottom of the pocket to the string middle, but that is missing here.
- Can wireless charge with the pocket empty (not even going to try with cards in it, since that can't be good for the strips).
- Surprisingly thin, which is nice for a wallet case, but doesn't offer the best protection.
- Very minimal lip/raise-ivity. Placing the phone face down, it will rest on the case lip, but the smallest amount of pressure will cause contact with the tabletop. Will be useless for any drops.
- Buttons are slightly stiffer, and the volume button has been split in 2, instead of a single rocker design.
- Side edges add enough width to the phone to reduce accidental edge touches, but that also means, again, minimal protection.
- Camera area well protected and symmetrical.
- Overall: This case looks and feels nice and would be decent for night out. However, it offers very little protection - more than a skin or ultraslim case, but much less than any other case I've had (including the cheap $5 soft TPU throwaways). The cardholder is nice to have, but annoying to use. All that said, it's still a nice everyday driver case for people that don't usually use cases (don't drop their phones), want basic scratch protection, and something that's stylish without being gaudy.
- Who this is for: You don't like cases, but feel compelled to protect such an expensive device. You're not a klutz, so want something cheap, but unique and premium feeling.
YFWOOD real wood case (Note 8)
- I was looking forward to this case the most, and found it the most disappointing.
- There is a thin piece of dyed balsa wood or compressed wood splinters, that's recessed into a stiff plastic pattern. Or maybe there's a thin sheet wedged between two plastic surfaces. Can't tell. The point is that you won't actually feel wood, and if you did, you'd probably get splinters, judging by how rough it is.
- Feels like a low quality, hard and slippery plastic case.
- Minimal protection, slightly more lip than the Poetic (above), but looser fit, so a direct hit would probably cause the phone to pop out anyways.
- Symmetrical camera protection, good camera protection.
- Super stiff buttons, different texture around buttons, but the Bixby and volume buttons have a continuous texture (no change in texture between them), so you're never sure if you're about to hit the Bixby or volume down button.
-Overall: Just don't buy this case. I thought this would be the 'interesting case' for my phone and it turned out embarrassingly 'meh'. Slippery, no protection (except scratches), cheap feeling, and makes the phone more difficult to use.
- Who this is for: You were going to get a $7 case, but found $5 off coupon and thought you'd get all fancy.
8 probably overspent but I gave in and bought the otter box if I spend g 1000 dollars on a phone j want it protected from drops. I actually think it's a good case. I did ended up modified the case I cut the plugs off where the charging port and headphone jack is. Don't need a pressure put on the power plugs while charging don't want future problems with charging port
Hi
No matter how hard I look for covers, I just can't find any cover to adequately protect both the phone and it's screen sides.
The cases I found so far seems to either adequately protect the phone (Samsung's Protective Stand Cover is the best I found so far but won't adequately protect the sides, what if the surface is not flat?) or questionably adequately protect the screen (wallet type covers like Spigen Wallet S, Samsung official LED Cover and more).
Is there any case that would adequately protect both the phone and its sides?
If not, what would protect it the best?
Maybe I am wrong but I don't think I can rely on screen protectors, they've failed me in the past.
Thanks!
I am doing a search for cases with raised edges. The only decent one I have found so far is Encased Rebel. Don't listen to excuses like "raised edges would decrease edge function". Ask for proof that case edges are indeed raised. The Rebel has edges raised like half a milimeter above the screen. Not much but it is the most I found so far. With a glass screen protector (Whitestone) it is not raised anymore but almost level with the "screen". All the rest I tried leave edges exposed.
notefreak said:
I am doing a search for cases with raised edges. The only decent one I have found so far is Encased Rebel. Don't listen to excuses like "raised edges would decrease edge function". Ask for proof that case edges are indeed raised. The Rebel has edges raised like half a milimeter above the screen. Not much but it is the most I found so far. With a glass screen protector (Whitestone) it is not raised anymore but almost level with the "screen". All the rest I tried leave edges exposed.
Click to expand...
Click to collapse
Thanks!!
This is the first case I saw with raised lips on all edges, It doesn't really look good, is there any other option?
Do you think that wallet cases may do the job?
EDIT: btw, the buttons of the Encased Rebel case aren't good at all.
I haven't found another option yet. Waiting for another case, then I will give up and let the perfect one find me. To me it looks good enough and I don't mind the buttons too much.
mbenji86 said:
Hi
No matter how hard I look for covers, I just can't find any cover to adequately protect both the phone and it's screen sides.
The cases I found so far seems to either adequately protect the phone (Samsung's Protective Stand Cover is the best I found so far but won't adequately protect the sides, what if the surface is not flat?) or questionably adequately protect the screen (wallet type covers like Spigen Wallet S, Samsung official LED Cover and more).
Is there any case that would adequately protect both the phone and its sides?
If not, what would protect it the best?
Maybe I am wrong but I don't think I can rely on screen protectors, they've failed me in the past.
Thanks!
Click to expand...
Click to collapse
This: https://www.spigen.com/collections/galaxy-note-8/products/galaxy-note-8-case-rugged-crystal
i just want to stay in this thread. i would happily give up edge functions to have a lip that protects the screen along the sides. i just wish there was an option that was also considered "slim" not a fan of bulky cases, let alone bulky cases on a phone this large.
I did you guys a favor and ordered every note 8 case I could find that: *did* look like it might protect the edges and *did not* make me cover the glass or various ports.
I tried:
Spigen Tough Armor
Encased Rebel
TILL Knight Armor
WallSkiN Turtle
Zizo Static
Zizo Bolt
- The Encased Rebel is the only one that truly comes up above the edges at all.
- I had read that some of these tougher cases can break the phone just putting them on, so I was SUPER careful applying each of them... and I could see that if one were not careful, some of them would put a LOT of pressure on the phone during installation. Because of the way the hard shell part of this case comes in two pieces, it did not scare me putting the thing on - yet the hard part does stay well attached to the rubbery bit once you have it on right the first time.
- I don't have a problem with the buttons on mine, but I am careful to make sure the case's button bits are properly seated over the actual phone buttons. If you just slap that baby on, you may have a problem.
- The case isn't bulky
- Cordless charging works fine with this case
Last week I dropped my newly "encased" phone hard while running and while the corner of the hardcase broke, the phone was fine... I called that a win for now and just ordered another one.
AS for how it looks - I love purple EXCEPT for this particular color of purple. I tried to order the navy one but it is sold out. I can imagine that either the navy or black would look pretty good, but my husband has the same phone in a black case so ... I'm sticking with the somewhat lame purple for now - in order to keep peace in our little cellular community.
I figure in a few months I'll do another search to see if a different manufacturer has served this obvious need.
Thank you to @notefreak for your recommendation.
Got the N8 last week. I'm still looking for a good case that would give decent protection - not a fan of the tank cases. From the reads so far - the Patchworks have done a good job wrt to the N8.
Get Rhino shield. I have dropped a couple of times and it really protects my phone from all sides.
Search for venoro rugged note 8 case on amazon. This case definitely protects the sides of the note 8 but it makes it bigger. It doesn't go above the screen but it is quite a bit wider at the sides. It is a bit slippery on the back also. When you get it, it seems pretty cheap and seems like it would not go together correctly. When you snap it together with the phone in it is when it feels sturdier. Cheap.
Just take care of your phone and don't user it like a hook for climbing. I recommend the one provided when you buy the phone.
Captain Droid said:
Get Rhino shield. I have dropped a couple of times and it really protects my phone from all sides.
Click to expand...
Click to collapse
Having to. Dropped it one time, device is fine. What i don't like is how the buttons feel and work. Could be better.
Gesendet von meinem SM-N950F mit Tapatalk
Ghostek ultrafit 2. I have had Ghostek for my Note 7, S7 Edge and now my Note 8. They are the only case I could find that actually has the sides that come up higher than the display. Buttons and everything works great.
https://www.amazon.com/Ghostek-Covert-Samsung-Galaxy-Military/dp/B0753N93M1/ref=sr_1_4?ie=UTF8&qid=1522688607&sr=8-4&keywords=ghostek+note+8
---------- Post added at 11:05 AM ---------- Previous post was at 11:05 AM ----------
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
I switch phones often, but one thing that remains constant is my Pitaka MagEZ cases. Have purchased well over 10 of them at this point. Wouldn't choose any other thin case
PseudoChris said:
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
Click to expand...
Click to collapse
Does the pitika have a lip to protect the screen? Thanks
magichoward said:
Does the pitika have a lip to protect the screen? Thanks
Click to expand...
Click to collapse
The "Air" series cases generally don't rise above the screen.
They do have a thicker "Pro" series option with a raised lip to protect the screen, bumpers on the corners, etc.
Samsung OEM silicon. Can confirm it has excellent grip
seoulbrova said:
Samsung OEM silicon. Can confirm it has excellent grip
Click to expand...
Click to collapse
The cloth one does as well since there's a slim silicone band along the edge.
zedwards said:
The cloth one does as well since there's a slim silicone band along the edge.
Click to expand...
Click to collapse
Yes I've seen the one the only concern I've read it's a little difficult to remove the spen.. Your thoughts.
I will never choose Pitaka again.
Edges are rough and the upper part could have covered more
But I especially won't because it damaged my Note 10+ because of a defect in the inside of the case that made a grain of sand sized hole in the back of my phone.
Been using the Zizo Bolt on my Note 10+ for over 6 months. Excellent grip, usability and protection.
Kick stand doubles as a grip; either fully retract/extend it to keep from losing it's pins, if not secured in either position they can work their way out in your pocket! No issues with this case otherwise.
The one for the 20 seems to come with a temper glass screen protector; that may not work so well.
That's not present on the one for the 10.
Presumably you can use it without and substitute one one your choice?
Damn the 20's cam has a big bullseye on it... no likey. Buying a good case for the 10+ was very hard early on, no doubt the 20 U will be harder to protect
https://www.zizowireless.com/produc...axy-note-20-ultra-case?variant=32315584282672
magichoward said:
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
Click to expand...
Click to collapse
https://www.amazon.com/JJNUSA-Handmade-Leather-Samsung-Galaxy/dp/B08DXWJSQ1?ref_=ast_sto_dp
you know i never thought trying to find a case was going to leave me so hard pressed. note i do not mind the camera bump one bit. but they could have rounded out the camera hump a bit more. not the corners, but where the surface meets the edges and also they could have slanted the sides a bit more angled. who knows they did pull it off pretty good.
still on the camera bump.
note: with JJNUSA leather case you will be covering the mic on the camera bump. if that is a problem for you look elsewhere for a case.
i have received 200 in incentives to order goodies when i got my phone pre ordered and used it to order a few cases.
cases i ordered:
samsung rugged: bulky, heavy, don't like the texture on the back and flimsy kickstands that shoot off when used
samsung leather case: upgrade from last years, 2g lighter. seamless, but warps at the bottom. good cam protection.
samsun silicon: unsure if food grade safe. and slippery as glass
-other cases-
spigen Rugged Armor: oddly best all tpu case with carbon fiber accents. the back is slippery if trying to reach across the screen. side bumpers have one way slip grip and flimsy. camera is well protected. pen cut out too deep corner exposed but covered. top /bottom bumper good but top may block ear piece. 2g heavier then jjnusa leather
...now my official review of the JJNUSA Handmade Leather Case...
NOTE i used amazon prime
don't let the first pic they have on amazon throw you off, but what bothers me is the video they added to the product and it is of the s20 ultra; the camera lens is so scratched. i am still baffled how they did that. then again we will see in due time, because i can not stand the samsung leather case(which got me hooked on leather cases oddly) it is too slippery. the jjnusa case has tpu sides and saddle leather on back with plastic on the inside that the phone rests on. but i will say the leather on the back is so soft i think it sorta makes up for the lack of suede like the official samsung case has. then again the leather is so thick its' edges pop out the mold a teensy-weensy bit, but i doubt with proper use and not picking at it it will survive for a long time. with the 5% off coupon i also got another 1 usd off(who knows if it was the amazon prime). so for 19.95 it is a steal. most other leather cases are $30+. a steal; why may you say? hold on let me get to the rest of it. if we all remember the lg g4 leather back it was a looker. that was it, because it scratched easily and punctured easily. then we go onto the samsung leather case that scratches easily with minimal show. further more i can not say what that will mean over long term usage with this case from jjnusa. treat it lightly and it should be fine. now back to the leather on the jjnusa case. the leather reminds me of the type you get on a saddle and does not separate from itself. that is a plus. but a minus if the antiquing they use comes off very very easily?, and it does(con or not?) i had a cane that had antiquing and it turned my hands black, but after it leveled out it was fine. you know they always slap so much on to fill in the design that almost certainly more then half they put on will rub off. i have rubbed off some already. hence it would not rub off like wow, i had to use my nail. no way does it show like scratches on the samsung leather case. either way the extra antiquing will no matter what fade away over time and settle down to where it should be. i still think it will look good. at the same time the leather is much more scratch resistant then the latter. and the design and the look really grew on me. now on to the sides. the power button and volume are labeled with symbols and i like it even though i will never look at it. what else i like is that they are tpu like the rest of the sides. the tactile of the buttons are sturdy then again not too stiff not too mushy. then there is a bonus or an achilles heal; you move down the same side as the buttons and find a wrist strap punch out so you can add a wrist strap. have not tested it, seems like it should be worthy of use and not fearing. the bonus is removing the phone from the case, it does not shoot out like it does with the samsung leather case does. still it holds it in better. this is where i tell you that the jjnusa case has way better screen protection that leaves a better feel in the hand. the samsung leather case has a squidgy spongy top and bottom. the bottom is already warped and i never used it; i just put it on a few times and took it off. also a fail for the bottom bumper is the difficulty to remove the spen without nails. the jjnusa case is cut out just right and since it is thinner and more stiffer in a good way you can press your thumb or finger and hear that satisfying click to eject it. with that said the top and bottom bumper are raised higher then the samsung to protect the screen. the samsung case is more flush and flimsy.
i am a happy camper and if it fairs well i will update to 5 stars from 4, but i am really thinking at the price to slap down for another. as we all know leather cases do not last as long as other types
the reason i gave it 4 stars is i never really heard of JJNUSA till i saw them on etsy.com and since they where based in china i thought meh. then i thought to ebay's third party cases and said but leather? does not smell much like leather, oddly that is how saddles with the same type of leather smells. or it could be the antiquing they used and the shipping package. it was not shipped in a box or cheap plastic, it was in a cloth sleeve in a sealed padded envelope. JJNUSA do claim Oregon origins... yeah right etsy.com says ships from china.
i have played around with plenty of cases and phones in cases so it's not like i only have really had the note 20 ultra... just do not get one of them ultra thin all tpu cases. i have one for my lg g4 and only really protects the sides and back. busted the screen.