Database Develop

[GUIDE] OOS v4.0.3 ---> FLASH & ROOT STOCK -OR- CUSTOM ROM WITH EASE & CORRECTLY

[GUIDE] OOS v4.0.3 ---> FLASH & ROOT STOCK -OR- CUSTOM ROM WITH EASE & CORRECTLY
If you think that I need to add more information to this guide, please post your request. I'm not able to guess what you want from me to add to this guide.
Thank you!
INTRODUCTION:
This guide is mainly for users who tried flashing OxygenOS v4.x.x the easy and short way (like in post #9 in this thread), which had issues in the process.
I covered the most common issues with flashing OOS v4.x.x in this guide. However, you can use this guide to flash OxygenOS (latest Stable and Beta versions)
and root them OR flash your custom ROM. Just follow the instructions.
Now, you ask “why I decided to write this guide?”. Well here’s my story:
I had FreedomOS v1.7 with Google apps installed (including Dialer and Contacts from OpenGApps), encrypted, official twrp (v3.0.2-1), Xposed (v3.1.1), framework (v87),
AdAway v3.2, YouTube AdAway and SuperSU v2.79 (stable). Also, stock kernel, no Dolby ATMOS or A.R.I.S.E apps.
So, when OOS v4.0 came out, I waited for FreedomOS v2.0 to come out too. Once it did, I downloaded the ROM, OpenGApps, modified twrp .28 and started
the flashing process (I backed up my data first).
First, I flashed twrp .28 (had no problems booting into it), and clean flashed FOS v2.0. I selected “Yes” in “Pin/Pattern backup in data partition”, so I wouldn’t have issues with encryption. I selected the regular apps (for OOS to work properly) and installed the OS.
When it was done, I rebooted the device to the OS. I was confused with the new “dm-verity” message popping from nowhere, but the OS booted successfully.
When I rebooted to the twrp (to install OpenGApps), it asked for a password. I couldn’t enter the right password, because it wouldn’t accept any and it blocked
my access to my internal storage.
I started panicking, looking for answers, and I was afraid that I bricked my phone. However, after some research, I calmed down. I realized that my bootloader was still working and could roll back to OOS v3.2.8 (with stock recovery), which I did. From there I flashed FOS v1.7 and waited for more information about the new Nougat update for OnePlus 3.
Now, I’m using Stock OygenOS v4.0.3 with Stock Kernel (see FAQ #16) and so far, no issues (no dm-verity message or password upon entering modified twrp).
I tried to repeat the dm-verity issue and fixed it (see FAQ #6). I was so frustrated that no one posted a proper guide on how to fix these issues, or they were too advanced. I didn’t want to mess around with the core of the system too much. Therefore, I decided to post a simple-to-follow guide.
DISCLAIMER & IMPORTANT:
I am not responsible for any damages done by this guide. You are tinkering with your phone and held responsible for that. This is not an advanced guide. Therefore, I will refer you to the advanced guides when needed. Furthermore, this guide is based on the issues that I and other users encountered while
flashing OOS v4.x.x ------------>***BACK UP PERSONAL DATA BEFORE PROCEEDING ANY FURTHER***
This guide is intended for owners of OnePlus 3. But, after some poking in OnePlus 3T forums, you can use this guide. The only differences the OnePlus 3T
have are a newer processor, newer front camera and a different color from OnePlus 3. Make sure to use the appropriate tools (Stock recovery, TWRP,
OxygenOS v4.0.3, etc.) for OnePlus 3T. Again, I will not be responsible for any damages caused by this guide.
Please follow this guide to get rid of: dm-verity, encrypted twrp, encrypt or decrypt your device (as OnePlus 3 comes encrypted by default), change your file system from EXT4 to F2FS (vice versa as well). Also, flash a Marshmallow or Nougat Stock OOS (Stable or Beta versions), root them OR unroot your device, OR flash a custom ROM.
As far as I know, tested and read in forums, Android v6.0.1 (OxygenOS v3.x.x) supports only EXT4 file system, and Android v7.0 (OxygenOS v4.x.x) supports both EXT4 and F2FS file systems. However, F2FS is recommended for Android v7.0 (OxygenOS v4.x.x). When you perform, a full factory reset in OxygenOS v4.x.x, the file system changes from EXT4 to F2FS. ONLY “Data (userdata)” is affected by this. If you want to go back to Marshmallow, OxygenOS v3.x.x will change your file system from F2FS to EXT4 when you sideload it.
OxygenOS v4.0.3 still comes with some issues, bugs, and some rooting services are not fully supported yet (i.e. Xposed for Nougat). Luckily, OnePlus released kernel sources of Nougat, and we need to wait a little longer for Xposed and other rooting services to be supported. Therefore, I advise staying away from it,
for a little while, until those issues are fixed, and new ones don’t pop up. Also, until rooting apps are fully supported. Follow OnePlus community forums and
XDA forums for updates, troubleshooting, and solutions for your issues. MAKE SURE TO BACK UP YOUR PERSONAL DATA, time to time.
Before posting questions or issues or requests, check FAQ and posts in this thread. Thank You!
WHAT WILL YOU NEED?
You don't need to download everything in this section, only what you prefer to roll with.
ADB drivers installed on your computer (I have version 1.0.32 installed)
Unlocked bootloader (if you haven't done it yet, follow this guide: https://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733)
DiskInfo app from the Play Store:
https://play.google.com/store/apps/details?id=me.kuder.diskinfo&hl=en
OxygenOS v3.2.8 OTA:
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.8/
OxygenOS v4.0.3 OTA:
https://www.androidfilehost.com/?fid=457095661767136075 OR http://otafsc.h2os.com/patch/amazon...ygen_16_OTA_041_all_1702081756_0f1e56a75f.zip
*** Download speeds might be slow. Be patient. ***
OxygenOs Beta 11 (Nougat):
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_openbeta_11/
Stock Recovery v2.0 (compatible with OOS v3.x.x and OOS v4.x.x):
http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img
Official TWRP (v3.0.2-1 for OxygenOS v3.x.x ; v3.0.3-0 for OxygenOs v4.x.x):
https://twrp.me/devices/oneplusthree.html
Unreleased Official TWRP v3.0.4-1 for Nougat (OxygenOS v4.x.x): *** Recommended for Nougat ***
https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-3t-t3543391
Unofficial TWRP (v3.0.3-0 for LineageOS v14.1):
https://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
Modified TWRP v3.0.3-x blu_spark v16 from @eng.stk:
https://forum.xda-developers.com/devdb/project/dl/?id=23082
SuperSu v2.79 (Stable):
https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
OpenGApps (latest version):
http://opengapps.org/
Your desired custom ROM (I tested FreedomOS v1.7 and v2.3 and v2.4-CE, Experience ROM v10.1 [Stable and Beta 11], LineageOS v14.1):
https://forum.xda-developers.com/oneplus-3/development/rom-freedomos-1-0-t3409348 (FreedomOS - Stable [v1.7 - OOS v3.2.8 ; v2.3 - OOS v4.0.2])
https://forum.xda-developers.com/oneplus-3/development/rom-freedomos-ce-1-7-t3470660 (FreedomOS - Beta [v2.4-CE - OOS Beta 11])
https://forum.xda-developers.com/oneplus-3/development/rom-experience-rom-v1-0-t3522259 (ExperienceOS - Stable and Beta 11 [v10.1])
https://forum.xda-developers.com/oneplus-3/development/rom-cyanogenmod-14-1-oneplus-3-t3496850 (LineageOS v14.1 - based on Andriod v7.1.1)
Code:
[I][SIZE="4"][B] * I'LL BE USING OOS v4.0.3, OFFICIAL UNRELEASED TWRP v3.0.4-1 AND FreedomOS
v2.3 AS AN EXAMPLE FOR THIS GUIDE. OTHER VERSIONS OF OOS AND TWRP
(PROVIDED) ARE APPLICABLE TO BE USED IN THE GUIDE (ONLY WHAT I TESTED).
[COLOR="Red"][I] * If you don't have dm-verity issue, file system change issue or password
upon entering TWRP, then go to Section C (FLASHING YOUR CUSTOM ROM)
-OR- Section D (FLASHING AND ROOTING STOCK OOS OR UNROOT).
* If you do have dm-verity issue, file system change issue or password upon
entering TWRP, then continue to Section A (DM-VERITY).[/I][/COLOR]
[/B][/I][/SIZE]
A - PROCEDURE (DM-VERITY):
Code:
[I][SIZE="4"][CENTER][B]***** Check FAQ #5 before proceeding any further! *****[/B][/CENTER][/I][/SIZE]
Boot to bootloader by holding Volume Up and Power buttons.
Connect the phone to the computer via USB cable.
Go to your ADB folder (for me it is C:\Android\). Press “Shift” and click the right mouse button. Click on “Open command window here”.
In the console write “fastboot devices” to see if your computer recognizes your OnePlus 3.
When you could see that your device is recognized, write “fastboot flash recovery recovery_op3.img” to flash Stock Recovery of OxygenOS.
Disconnect the device, press volume up once, then press the power button once to turn off the phone.
Boot into recovery by holding Volume Down (-) and Power button down for a few of seconds.
Now, for some people, it will ask a password. If not, continue to #9 and ignore #8. If it asks you to enter a password to decrypt your data, choose “Forgot password” and let it erase all your data and let it reboot. (MAKE SURE YOU BACKED UP YOUR PERSONAL DATA BEFOREHAND). Most likely, it will reboot to the OS, so boot it to recovery again. Go to #10.
For those who doesn’t have to enter a password, press “English”. Press “Wipe data and cache” > “Erase everything (Music, pics, etc.)” > “This cannot be undone, continue?”. Moreover, let it wipe your data. Most likely, it will reboot to the OS, so boot it to recovery again. Go to #10.
Code:
[CENTER][I][SIZE="4"][B]AT THIS POINT IF YOU HAD DM-VERITY ERROR/ISSUE, IT SHOULD BE FIXED AND GONE.
IF IT STILL APPEARS, DON'T WORRY IT WILL BE GONE AFTER #12
IT CAME BACK TO ME ONE MORE TIME, BUT I GOT IT FIXED.
***** Check FAQ #6 for more information *****[/B][/I][/SIZE][/CENTER]
Select “English” > “Install from ADB” > “Ok”. Connect your phone to your computer. Go to your ADB folder (for me it is C:\Android\). Press “Shift” and click the right mouse button. Click on “Open command window here”.
In the console, write “adb devices” to see if your computer recognizes your OnePlus 3.
When you could see that your device is recognized, write “adb sideload OnePlus3Oxygen_16_OTA_041_all_1702081756_0f1e56a75f.zip”
to flash OxygenOS v4.0.3. (See FAQ #4 and #17 if you have issues)
Reboot and you have OxygenOS v4.0.3!
Sign-in into your Google account and Download the “DiskInfo” app from the Play Store. Launch it, and press “Data (userdata)”. You should see:
- Encrypted: yes
- Decrypted block device: /dev/block/dm-1
- Mount point: /data
- File system: f2fs
A. If you see that it is in F2FS file system format, proceed to Section C (FLASHING YOUR CUSTOM ROM) OR Section D (FLASHING AND ROOTING STOCK OOS OR UNROOT).
B. However, for some people (for some reason) it does not happen. You would see that your file system format (for userdata) is still on EXT4. Don’t be frustrated. A little bit more work needed to be done. Therefore, go to Section B (CHANGING FILE SYSTEM FORMAT AND ENCRYPTING OR DECRYPTING YOUR DEVICE). It will solve that problem.
Code:
[I][SIZE="4"]* Your phone needs to be encrypted by default. It comes like that from the
manufacturer. See the following links:
1. [url]https://forums.oneplus.net/threads/encrypted-oneplus-3.452572/page-2[/url]
2. [url]http://www.androidpolice.com/2015/10/19/android-6-0-will-finally-require-manufacturers-to-enable-full-disk-encryption-by-default-on-new-devices/[/url]
3. [url]http://arstechnica.com/gadgets/2015/10/android-6-0-re-implements-mandatory-device-encryption-for-new-devices/[/url]
4. [url]https://source.android.com/security/encryption/[/url]
5. [url]http://www.howtogeek.com/141953/how-to-encrypt-your-android-phone-and-why-you-might-want-to/[/url]
6. [url]http://www.extremetech.com/mobile/216560-android-6-0-marshmallow-makes-full-disk-encryption-mandatory-for-most-new-devices[/url]
[/I][/SIZE]
B - PROCEDURE (CHANGING FILE SYSTEM FORMAT AND ENCRYPTING OR DECRYPTING YOUR DEVICE):
Go to: Settings > Security & fingerprint > Encryption (located at the bottom). Make sure it says “Encrypt phone (Encrypted)”. To make sure
you will need to do a factory reset.
Now go to: Settings > Backup & reset > Factory data reset. In “Optional” select “Erase internal storage” and press “RESET PHONE”. Confirm by pressing “ERASE EVERYTHING”.
It will reboot to Stock Recovery and wipe your data. When it’s done, it will reboot to the OS.
Again, download the “DiskInfo” app from the Play Store. Launch it, press “Data (userdata)”. Now you should see (it wouldn’t show “Encrypted: yes” at all):
- Mount point: /data
- File system: f2fs
Now go to: Settings > Security & fingerprint > Encryption (located at the bottom). Make sure it says “Encrypt phone” and that you can press it. (DON’T ENCRYPT YOUR PHONE WITH THAT OPTION)
Now you successfully changed your file system to F2FS and decrypted your phone!
Code:
[I][SIZE="4"] * With Official TWRP v3.0.3-0 and modified TWRP v3.0.3-x v16 (from [user=3873953]@eng.stk[/user])
you are able to use the phone in encrypted mode, password request at
boot up and with Stock or rooted OOS v4.0.3 (Also, I tested it myself).
* Therefore, I will ask you to encrypt the phone back again. Proceed with
the following instructions:
[CENTER]***** Check FAQ #9 for more information *****[/CENTER][/I][/SIZE]
Reboot to Stock recovery v2.0
Select “English” > “Install from ADB” > “Ok”. Connect your phone to your computer. Go to your ADB folder (for me it is C:\Android\). Press “Shift” and click the right mouse button. Click on “Open command window here”.
In the console, write “adb devices” to see if your computer recognizes your OnePlus 3.
When you could see that your device is recognized, write “adb sideload OnePlus3Oxygen_16_OTA_041_all_1702081756_0f1e56a75f.zip”
to flash Oxygen OS v4.0.3. (See FAQ #4 and #17 if you have issues)
Reboot your device. Now you back to being encrypted and “userdata” was changed successfully to F2FS file format on Stock Oxygen OS v4.0.3!
Go to Section C (FLASHING YOUR CUSTOM ROM) to properly flash your custom ROM. *** IT’S YOUR CHOICE ***
OR Go to Section D (FLASHING AND ROOTING STOCK OOS OR UNROOT) to remain in stock, root or unroot. *** IT’S YOUR CHOICE ***
C - PROCEDURE (FLASHING YOUR CUSTOM ROM):
Boot to bootloader by holding Volume Up and Power buttons.
Connect the phone to the computer via USB cable.
Go to your ADB folder (for me it is C:\Android\). Press “Shift” and click the right mouse button. Click on “Open command window here”.
In the console write “fastboot devices” to see if your computer recognizes your OnePlus 3.
When you could see that your device is recognized, write “fastboot flash recovery twrp-3.0.4-1-oneplus3.img” to flash Official Unreleased TWRP v3.0.4-1.
Disconnect the device, press volume up once, then press the power button once to turn off the phone.
Boot into the TWRP by holding Volume Down (-) and Power button down for a few of seconds.
It takes a little bit more time to boot to blu_spark’s, Official and Unofficial TWRPs. Be patient.
Code:
[I][SIZE="4"] * The “PASSWORD UPON ENTERING TWRP” should not be an issue any longer (only
if you followed the whole guide). It is caused by the TWRP being modified
(has an issue with encryption), not being officially released and fully
supported for the Nougat update. Versions “.28”, “.22” and “.19” are known
for that issue. Therefore, DO NOT USE THEM. If one of them works for
you, then use it at your own risk.
[CENTER]***** Check FAQ #9 for more information *****
[/CENTER][/I][/SIZE]
Press “Wipe” > “Advanced Wipe”, and select “Dalvik / ART Cache”, “System”, “Data” and “Cache”. Then swipe “Swipe to Wipe” for a clean flash.
After it’s done, go back to the main menu. Press “Install” and look for your desired custom ROM and press on the zip file to install it.
* I used FreedomOS v2.3 as an example and I didn't have any battery drain issues. (For more information, see FAQ #10)
D - PROCEDURE (FLASHING AND ROOTING STOCK OOS OR UNROOT):
Code:
[I][SIZE="4"][COLOR="Red"][I] * If you don't have dm-verity issue, file system change issue or password
upon entering TWRP, then go to #1.
* If you came from having dm-verity issue, file system change issue or
password upon entering TWRP (solved by using Procedure A and/or B),
then go to #12.
[/I][/COLOR][/I][/SIZE]
Boot to bootloader by holding Volume Up and Power buttons.
Connect the phone to the computer via USB cable.
Go to your ADB folder (for me it is C:\Android\). Press “Shift” and click the right mouse button. Click on “Open command window here”.
In the console write “fastboot devices” to see if your computer recognizes your OnePlus 3.
When you could see that your device is recognized, write “fastboot flash recovery recovery_op3.img” to flash Stock Recovery of OxygenOS.
Disconnect the device, press volume up once, then press the power button once to turn off the phone.
Boot into recovery by holding Volume Down (-) and Power button down for a few of seconds.
Select “English” > “Install from ADB” > “Ok”. Connect your phone to your computer. Go to your ADB folder (for me it is C:\Android\). Press “Shift” and click the right mouse button. Click on “Open command window here”.
In the console, write “adb devices” to see if your computer recognizes your OnePlus 3.
When you could see that your device is recognized, write “adb sideload OnePlus3Oxygen_16_OTA_041_all_1702081756_0f1e56a75f.zip”
to flash OxygenOS v4.0.3. (See FAQ #4 and #17 if you have issues)
Reboot and you have OxygenOS v4.0.3!
A. UNROOT - At this point, if you want to unroot and go back to completely stock, then use this guide: https://forums.oneplus.net/threads/guide-how-to-unroot-your-oneplus-3-and-go-back-completely-to-stock.456232/
*** Most of the procedures for unrooting you have already done. Only locking bootloader is left. Good Luck! (YOU CAN STOP HERE)
B. ROOT - Continue to #13
Boot to bootloader by holding Volume Up and Power buttons.
Connect the phone to the computer via USB cable.
Go to your ADB folder (for me it is C:\Android\). Press “Shift” and click the right mouse button. Click on “Open command window here”.
In the console write “fastboot devices” to see if your computer recognizes your OnePlus 3.
When you could see that your device is recognized, write “fastboot flash recovery twrp-3.0.4-1-oneplus3.img” to flash Official Unreleased TWRP v3.0.4-1.
Disconnect the device, press volume up once, then press the power button once to turn off the phone.
Boot into the TWRP by holding Volume Down (-) and Power button down for a few of seconds.
It takes a little bit more time to boot to blu_spark’s, Official and Unofficial TWRPs. Be patient.
Connect you OnePlus 3 to your computer and copy the SuperSU v2.79 (Stable) to your device.
Pick up your phone. From the main menu, press “Install” and look for the SuperSU v2.79 (Stable zip file). Press it to install the root and after it's done, reboot to the OS.
That's it! Everything should be working properly
(except the bugs and issues on OxygenOS Nougat update).
ENJOY!​
CREDITS:
@NevaX1 --------------> For FreedomOS ROM
@jamal2367 -----------> For ExperienceOS ROM
@cpt.macp ------------> For in depth dm-verity remover guide
@Adithya R -----------> For in depth file system formating from EXT4 to F2FS guide
@eng.stk --------------> For modified TWRP that supports F2FS file format
@LELBOT --------------> For in depth dm-verity remover and file system formating from EXT4 to F2FS guides
@Naman Bhalla ------> For in depth bootloader unlocking, flashing TWRP, rooting, nandroid backup guide
@calvinistmac --------> For providing an unroot for OnePlus 3 guide
@Nishidh --------------> For providing OxygenOS v4.0.3 and Beta 11 OTA download links
@jcadduono ----------> For providing Official TWRP
@dianlujitao ----------> For providing Unofficial TWRP and LineageOS 14.1 ROM
@th3g1z ---------------> For providing an easy solution for Dm-verity issue
--------------------------> OnePlus Community and XDA forums for providing with issues, solutions and requests

FAQ (Q&A):​
Q: I can’t boot into TWRP! What to do?
A: Try using the previous TWRP or Stock Recovery.
[*]Q: I can’t boot into the OS! What to do?
A: Most likely some of the OS files are damaged or executed incorrectly. Try flashing or sideloading the OS again.
[*]Q: I can’t transfer files to my OP3 after wiping Internal storage OR Data folder/s in TWRP! What to do?
A: Don’t panic. Reboot to TWRP. It will create a folder so you can transfer files again.
[*]Q: I got an error sideloading the OS. Why is that?
A: Sometimes it occurs when the USB cable is wiggled side to side (the process stops at 92% with an error). Try again without touching
or moving the USB cable and the phone. Alternatively, it could be that USB debug is not enabled (not sure about that).
[*]Q: Is there an alternative way to get rid of dm-verity issue?
A: One simple command-line (enable) in bootloader can solve it. Check this post: https://forum.xda-developers.com/showpost.php?p=70698410&postcount=112
Otherwise, check this thread: https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685 This guide uses the .28 twrp
(NOT RECOMMENDED, BUT USE TWRP FROM @eng.stk) to use Stock Recovery, which I think is a bit more complex.
OR: https://forum.xda-developers.com/showpost.php?p=70415499&postcount=33
My guide uses only bootloader, Stock Recovery and TWRP from @eng.stk. Either way, they are the same guides.
[*]Q: The "dm-verity issue" came back after flashing OTA of stock OOS v4.0.2 via the TWRP! What to do?
A: Simply follow "Section A" instructions until #13. After you sideloaded the OTA it will be gone. It happened the second time when I tried to
flash the OTA via TWRP. Therefore, don't flash OTA of stock OOS v4.x.x via TWRPs. Only via Stock Recovery v2.0
I got it fixed only after sideloading the OTA via Stock Recovery v2.0 (Check post #29 for more information)
If it still doesn't work check this thread and read it thoroughly: https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-t3539129
For more information, read FAQ #12
[*]Q: Your guide to change file format doesn’t work, OR I want to change “Cache” and “System” to F2FS as well. What to do?
A: Simply go to this link and at your own risk: https://forum.xda-developers.com/oneplus-one/general/guide-formatting-ext4-to-f2fs-losing-t3352116
Furthermore, @cpt.macp mentioed in post #34 in this thread that "/system and /cache need not to be f2fs . Oneplus Supports only /data
as f2fs and nothing else ."
[*]Q: I can’t log in into Snapchat after a clean flash of my desired custom ROM or after rooting my device. How to fix this?
A: I had the same issue, and it doesn’t occur to everybody. Before DIRTY flashing (wiping System, Cache and Dalvik only) the custom ROM
-OR- rooting your device, install Snapchat and log into it (on stock OOS v4.x.x). It might be a SuperSU (root) issue with Snapchat
(they enforced their security with rooted devices).
Also, OnePlus 3 has an issue with on-screen navigation bar. So, disable it in the "Buttons" menu until OnePlus fixes the glitch/bug.
[*]Q: Why did you choose TWRP v15 from @eng.stk -OR- Official TWRP v3.0.3-0 -OR- Unofficial TWRP v3.0.3-0?
A: They all work with the phone being encrypted, requesting a password on bootup to the OS and support F2FS file system.
.28 – had issues with encryption and F2FS file system, but for some users it works wonders.
.22 and .23 – I did not test, but I have read that .23 worked (decrypted).
.19 – Tested and solved the password issue, but had a mouse pointer in the middle of the TWRP (wasn’t a big deal). Worked in decrypted mode.
P.S. The official TWRP has issues with the name of the device. If you encounter those issues, then let the developer of the ROM
you're using know about it. So, he could fix it (it's a small fix). OR use TWRP v15 from @eng.stk. Unofficial TWRP is to be used
with LineageOS 14.1 & Experience v10 ROMs. Also, here is the reason why: https://forum.xda-developers.com/showpost.php?p=70593986&postcount=53
Also, Official TWRP v3.0.2-1 doesn't support Nougat. Therefore, you won't be able to boot to this TWRP. Don't use it for Nougat.
[*]Q: I am experiencing a battery drain. Why?
A: Facebook was the main issue for that, but it is now fixed (some users said that it still exists). I use Freedom OS v2.2 and no
issues so far with the battery. I got 5 hours SOT (Screen On Time) with 45% left (on the first day), and 5½ hours SOT with 26%
battery left (on the second day). Now, I think the OS is balanced because I get almost 8 hours of SOT. Try looking for a solution
in the forums. Also, disable mobile data when using WIFI and vise versa. Furthermore, battery life may vary with the applications
you use on a daily basis, screen brightness, how much and long you touch the screen, etc. (See the attached thumbnails)
[*]Q: I am experiencing issues with the Play Store app (It’s stuck on downloading). Is there a fix?
A: When you first launch it, it tries to update itself. It will crash 1-2 times. After that, everything works just fine. Also, uninstall or don’t
install Truecaller app (well known to cause this issue). It was fixed in OOS v4.0.2, but some users still experience this issue.
In addition, if nothing works, then try uninstalling the Play Store app and reinstall it via OpenGApps. For those who are not rooted,
try finding the Play Store app via the web (install it under your own risk, as I'm not responsible for the damages).
[*]Q: Why do you use stock recovery to sideload the OS?
A: First of all, you’re going to sideload OTA of Oxygen OS, which you can’t flash in the TWRP (some people can and you might get dm-verity
issue). Secondly, the stock recovery is simple and easy to use. Thirdly, If you flash the OTA from the official TWRP, you will get a dm-verity
message. Besides, OnePlus provided only with "OTA" zips and not "signed flashable" zips.
THE DM-VERITY ISSUE (CHECK THE FOLLOWING SOURCES FOR MORE INFORMATION):
https://www.xda-developers.com/qualcomm-maintains-its-dedication-to-security-with-secure-boot/ ; https://www.xda-developers.com/stri...r-correction-to-come-with-android-7-0-nougat/ ;
https://source.android.com/security/verifiedboot/ ; https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-t3539129 ;
https://forum.xda-developers.com/showpost.php?p=70574596&postcount=34 ; https://forum.xda-developers.com/showpost.php?p=70622726&postcount=97 ;
https://forum.xda-developers.com/showpost.php?p=70622760&postcount=98 ; https://forum.xda-developers.com/showpost.php?p=70622849&postcount=102 ;
https://forum.xda-developers.com/showpost.php?p=70622999&postcount=104
[*]Q: What if I want to go back using Oxygen OS v3.2.8 (Andriod v6.0.1) or custom ROMs based on it?
A: Simply instead of using Stock Oxygen OS v4.0.2 OTA in this guide, use Stock Oxygen OS v3.2.8 OTA.
It will bring back EXT4 file system and you can use Xposed.
[*]Q: After clean flashing my Custom ROM in TWRP, I get the following message: "No OS Installed. You Sure You Want
To Reboot". What to do?
A: Try dirty flashing your Custom ROM. (Source: https://forum.xda-developers.com/showpost.php?p=70622460&postcount=5291)
[*]Q: Android System WebView is disabled in the Play Store. When I try to enable it, it won't do anything. Unless I tap
it rapidly and it's still in disabled mode. What to do?
A: No need to worry here. It is normal due to Chrome being the new WebView in Android Nougat.
(Sources: http://www.androidpolice.com/2016/07/20/google-explains-chrome-will-become-webview-android-7-0/ AND https://productforums.google.com/forum/#!topic/nexus/Ni35XW6eRR0
https://www.reddit.com/r/GooglePixel/comments/5ayh5d/android_system_webview_not_enabled/ AND https://www.reddit.com/r/Nexus6P/comments/57t1hw/android_system_webview_keeps_disabling/)
[*]Q: Should I flash a custom Kernel (ElementalX or Blu_spark) on a custom ROM?
A: You can, but you might have CPUs being on max load and overheating issues (it's not caused by the kernel itself).
They work best, and only, if you have stock OOS v4.0.2 installed and rooted with SuperSU v2.79 Stable. Yes, for some
users the custom kernels work. But, for some they won't, due to firmware issues. You can try them on your Custom
ROM, but it's not guaranteed to work. The developers of FreedomOS and ExperienceOS solved this issue.
**Some users found a solution by setting SELinux to Permissive mode instead of Enforced.
I do not recommend setting your SELinux in Permissive mode! (as well as the developer of ElementalX)!
For more information, check this thread: https://forum.xda-developers.com/oneplus-3/how-to/potential-fix-cpu-battery-drain-aosp-t3543369
Also, check these articles: https://www.xda-developers.com/onep...ng-of-selinux-to-permissive-mode-in-fastboot/ ; https://www.xda-developers.com/onep...lus-33t-bootloader-vulnerability-in-next-ota/
[*]Q: I'm getting the error (cannot read "image.zip") when trying to sideload Stock OOS. Why and how to fix this?
A: For some reason, the thread added a space in the OOS file name. If you copy the file name for Stock OOS v4.0.2 from this thread,
make sure it doesn't have spaces in it (-OR- in any other file -OR- in the console).
** Also, make sure to enable USB Debugging in Developer Options.
** Follow these guidelines separately (if the first one doesn't work, use the second or third guideline):
Reinstall OnePlus Drivers using the attached zip (OnePlus_USB_Drivers_Setup.zip) and try again. In addition,
make sure your file name is not ending with ".zip.zip" or written like that in the console.
Bootup to your OS and connect the phone to the computer (make sure to choose transfer files mode).
Copy Stock OOS v4.0.2 OTA zip to the device and reboot to recovery. Select "Install from Internal Storage",
look for the OTA file and install it.
Read the following threads/posts/articles: https://forum.xda-developers.com/showthread.php?t=1990405&page=2 ;
http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/ ; https://forums.oneplus.net/threads/cannot-read-ota-zip.457965/ ;
https://www.reddit.com/r/oneplus/comments/504qgv/adb_cannot_read_error/ ; https://www.androidexplained.com/fix-cannot-read-sideload-update/ ;
https://forum.xda-developers.com/android/general/guide-how-to-adb-to-push-pull-files-t3372710
[*]Q: Every second song in Google Play Music gets skipped. What to do?
A: Make sure to disable AdAway, then reboot the device. Everything should come back to normal.
P.S. I will add more questions and answers if they get repeated in the forums, or the issue can be solved.​

Updates & News:​Updates:
January 14th, 2017 ---> Reverted modified TWRP v3.0.3-x v12 from @eng.stk back to v3.0.2-0 v11
(Reason: https://forum.xda-developers.com/showpost.php?p=70556176&postcount=2540)
January 15th, 2017 ---> Added an introduction section; Modified sections A, B and C for more fluent and easier guidelines; Added one more Q&A
January 20th, 2017 ---> Added Section D (FLASHING AND ROOTING STOCK OOS OR UNROOT) ; Modified sections A, B and C ; Modified FAQ (Q&A)
and added more Q&A ; Updated to OOS v4.0.2, Beta 11, Official TWRP v3.0.3-0, Unofficial TWRP v3.0.3-0, Modified TWRP v14 from blu_spark ;
Modified Intoduction, "Disclaimer & Inportant" and "What will you need?" sections.
January 23rd, 2017 ---> Updated to latest Modified TWRP v3.0.3-x blu_spark v15 from @eng.stk
January 25th, 2017 ---> Added Unreleased Official TWRP v3.0.4-1 for Nougat ; Minor updates to the guide and FAQ.
February 9th, 2017 ---> Added and updated the thread with OxygenOS v4.0.3 ; Added one more FAQ and a new story
February 10th, 2017 ---> Updated to latest Modified TWRP v3.0.3-x blu_spark v16 from @eng.stk
News:
January 14th, 2017 ---> Oxygen OS v4.0.2 coming next week! Confirmed.
(Sources: https://forums.oneplus.net/threads/4-0-2-in-works-roll-out-by-next-week-confirmed.488348/ AND https://twitter.com/OnePlus_ITA/status/819200734067617792 AND
http://www.androidsage.com/2017/01/14/oneplus-3-and-3t-oxygen-os-4-0-2/)
January 15th, 2017 ---> We as a community of developers and users, urge OnePlus to release kernel sources by complying with GPLv2.
(Source: https://www.xda-developers.com/xda-developers-urges-oneplus-to-comply-with-gplv2-and-release-kernel-sources/)
January 18th, 2017 ---> OnePlus said that OxygenOS 4.0 doesn’t use a Debug Kernel
(Source: https://www.xda-developers.com/oneplus-oxygenos-4-0-doesnt-use-a-debug-kernel/)
January 20th, 2017 ---> Seems like OnePlus released Kernel Sources for OnePlus 3/3T. Finally!
(Sources: https://www.xda-developers.com/oneplus-releases-android-nougat-kernel-sources-for-the-oneplus-33t/ AND https://github.com/OnePlusOSS/android_vendor_qcom_thulium/commits/oneplus/QC8996_N)
January 20th, 2017 ---> The Best ROMs, Kernels, and Mods for the OnePlus 3
(Source: https://www.xda-developers.com/oneplus-3-best-stuff/)
January 21st, 2017 ---> Remap your phone’s hardware buttons with "Button Mapper" app
(Source: https://www.xda-developers.com/xda-...an-app-to-remap-your-phones-hardware-buttons/)
January 21st, 2017 ---> How to move Chrome’s address bar to the bottom without a visual bug?
(Source: https://www.xda-developers.com/psa-...ar-to-the-bottom-no-longer-causes-visual-bug/)
January 22nd, 2017 ---> Enable this Chrome Flag to Lock Rotation in Fullscreen Videos
(Source: https://www.xda-developers.com/enable-this-chrome-flag-to-lock-rotation-in-fullscreen-videos/)
January 22nd, 2017 ---> Deeply Integrated Progressive Web Apps (WebAPKs) are Live for Chrome on Android
(Source: https://www.xda-developers.com/deep...-apps-are-already-live-for-chrome-on-android/)
January 25th, 2017 ---> Open Betas updates are paused for a month for OnePlus 3/3T due to Chinese New Year
(Source: https://forums.oneplus.net/threads/...s-3-and-3t-will-be-paused-for-a-month.492623/)
January 25th, 2017 ---> Security Analysts Identify a Trojan that Quietly Purchase Apps, a Rootkit that takes over your Device,
and Ransomware that Locks your Device
(Source: https://www.xda-developers.com/secu...device-and-ransomware-that-locks-your-device/)
January 28th, 2017 ---> An update from @rovo89 about developing Xposed for Nougat
(Source: https://forum.xda-developers.com/showpost.php?p=70773752&postcount=41)
February 1st, 2017 ---> OnePlus got caught red-handed in Benchmark cheating and came clean
(Sources: https://www.xda-developers.com/benc...ght-red-handed-and-what-theyve-done-about-it/ ; http://www.androidauthority.com/oneplus-meizu-just-got-busted-benchmark-cheating-746640/)
February 9th, 2017 ---> Two Critical OnePlus 3/3T Bootloader Security Flaws Discovered, One Patched and Other being Addressed
(Source: https://www.xda-developers.com/two-...overed-one-patched-and-other-being-addressed/)

Very easy to follow guide. I ended up at B8 "Now you successfully changed your file system to F2FS and decrypted your phone!". I would like my phone to be encrypted, but if I do it through the OS, TWRP does not accept my password for the data partition?

Thanks so much, mate. This is a really good job which is gong to help to many people

Hi,
thanks :good:
For info: new twrp-3.0.3-x_blu_spark_v12-op3 is out
source: https://forum.xda-developers.com/showpost.php?p=70541197&postcount=2519
@+

Hi, i have oxygen os 4.0.1 rooted and twrp v11 bluspark...But its normal when i deletet some file i dont see immeditely the free space unti i reboot the phone...this happened sometimes and sometimes not...Its a bug?

I have flash as you post, when flash done i check file system by diskinfo, it displayed "userdata not mounted". how do i fix it. plz help me. thank you very much.

Lol this is just what I did:
1. Flash latest @eng.stk TWRP, swipe to allow modifications
2. Wipe system, data, cache
3. Install 1.4GB 4.0.1 zip
4. Wipe dalvik and cache
5. On Mount, check Mount /system as read-only
6. Reboot to system
You now have stock 4.0.1 system, kernel, and recovery.
7. Boot to recovery. TWRP is overwritten by the OOS 4.0.1 recovery.
8. Wipe everything. /data is now f2fs
Optional: flash TWRP, swipe to allow modifications, and do not check Mount /system as read-only to keep it.
No issues at all.
Sent from my OnePlus 3 using XDA Labs

Thank you! Solved my problem with Dm-Verity. Do you think, for the future *4.0.2* update or whatever number will be, that we will be able to flash OTA via TWRP or we'll need stock recovery? Only full zip with TWRP?

You might want to change that TWRP v12 back to v11. Eng.stk found some issues with v12 and pulled it.
And great guide BTW ?
Sent from my OnePlus 3 using Tapatalk

Greetings ?,
After reading this guide i just need to ask several thinks to make clear.
Recently my brothers give me his op3 as he changes to op3t ; . I want to change the phone font and afaik its to impossible to do so without root.
Im currently on 4.0 ; will this guide applicable on my phone ? Or is there a way to change font without root. Thanks in advance

laupuy said:
Hi,
thanks :good:
For info: new twrp-3.0.3-x_blu_spark_v12-op3 is out
source: https://forum.xda-developers.com/showpost.php?p=70541197&postcount=2519
@+
Click to expand...
Click to collapse
I cant't download it from that thread v12 - says file might have been deleted.

mit2nil said:
I cant't download it from that thread v12 - says file might have been deleted.
Click to expand...
Click to collapse
Go to the thread's Downloads tab, download the first file. Ugh it was just mentioned above that v12 was removed.
Sent from my Lenovo A3300 using XDA Labs

VincentJoshuaET said:
Go to the thread's Downloads tab, download the first file. Ugh it was just mentioned above that v12 was removed.
Sent from my Lenovo A3300 using XDA Labs
Click to expand...
Click to collapse
Yup my bad. I was on first page and just used reply button. Never mind.

Answers to your concerns:
I apologize for the late response. I was doing a bit of research to answer all of your questions.
Thank you for your patience!
jackiass said:
Very easy to follow guide. I ended up at B8 "Now you successfully changed your file system to F2FS and decrypted your phone!". I would like my phone to be encrypted, but if I do it through the OS, TWRP does not accept my password for the data partition?
Click to expand...
Click to collapse
Seems like "sideload"ing OOS v4.0.1 didn't change your file system, correct?
I would recommend to start over. When you are done B7, "sideload" OOS v4.0.1 to encrypt the device again. After that's done, continue to section C.
Crazyhat said:
Thanks so much, mate. This is a really good job which is gong to help to many people
Click to expand...
Click to collapse
You're welcome!
Thank you!
I tried very hard on gathering the right information and doing the testing on my OP3.
I almost got it bricked because of OOS v4.0.0, so I decided to post an easy to follow guide.
laupuy said:
Hi,
thanks :good:
For info: new twrp-3.0.3-x_blu_spark_v12-op3 is out
source: https://forum.xda-developers.com/showpost.php?p=70541197&postcount=2519
@+
Click to expand...
Click to collapse
Thank you very much! I have updated the thread.
UPDATE: Reverted back to v11 due to data corruption issues.
playerboys10 said:
Hi, i have oxygen os 4.0.1 rooted and twrp v11 bluspark...But its normal when i deletet some file i dont see immeditely the free space unti i reboot the phone...this happened sometimes and sometimes not...Its a bug?
Click to expand...
Click to collapse
I think it's not normal and you should see an immediate change in your free space.
I couldn't find any information about that.
Your best options are to follow this guide (if you didn't already) AND/OR post this issue in OnePlus 3 community forums.
yohan_xda said:
I have flash as you post, when flash done i check file system by diskinfo, it displayed "userdata not mounted". how do i fix it. plz help me. thank you very much.
Click to expand...
Click to collapse
Did you "sideload" stock OOS in stock recovery OR flash custom ROM via TWRP (I think this one)?
Also, where did you stop (section and number)?
VincentJoshuaET said:
Lol this is just what I did:
1. Flash latest @eng.stk TWRP, swipe to allow modifications
2. Wipe system, data, cache
3. Install 1.4GB 4.0.1 zip
4. Wipe dalvik and cache
5. On Mount, check Mount /system as read-only
6. Reboot to system
You now have stock 4.0.1 system, kernel, and recovery.
7. Boot to recovery. TWRP is overwritten by the OOS 4.0.1 recovery.
8. Wipe everything. /data is now f2fs
Optional: flash TWRP, swipe to allow modifications, and do not check Mount /system as read-only to keep it.
No issues at all.
Sent from my OnePlus 3 using XDA Labs
Click to expand...
Click to collapse
Yes, that might be the easy way when you have no issues. But, this guide deals with common issues (dm-verity, twrp password etc.) users face when they tried to update to OOS v4.0.x
If you'll face these issues in the future, you'll know where to find the related guide to fix them.
Hurizen said:
Thank you! Solved my problem with Dm-Verity. Do you think, for the future *4.0.2* update or whatever number will be, that we will be able to flash OTA via TWRP or we'll need stock recovery? Only full zip with TWRP?
Click to expand...
Click to collapse
You are very welcome!
You could flash OTA via TWRP (full size zip and not the small 40mb zip), but I'm afraid that it might "break your root" (you wouldn't have it anymore). It can be fixed by flashing SuperSU.
Technically, you could dirty flash (wipe System, Cache and Dalvik only) the new OTA. If you would have issues after dirty flashing, post your bugs/issues, and most likely you would have to clean flash the OTA.
Give it a try (backup your personal data and dirty flash) or wait for user feedback on the new OTA.
VincentJoshuaET said:
Go to the thread's Downloads tab, download the first file. Ugh it was just mentioned above that v12 was removed.
Sent from my Lenovo A3300 using XDA Labs
Click to expand...
Click to collapse
Thank you for replying back to him! I appriciate it!
mit2nil said:
I cant't download it from that thread v12 - says file might have been deleted.
Click to expand...
Click to collapse
I appologize about that. I have updated the thread.
Explorer23 said:
You might want to change that TWRP v12 back to v11. Eng.stk found some issues with v12 and pulled it.
And great guide BTW
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
With a bit of delay, I've put back the link to v11.
Thank you, and I hope it helped you!
dinesh7208 said:
Greetings ,
After reading this guide i just need to ask several thinks to make clear.
Recently my brothers give me his op3 as he changes to op3t ; . I want to change the phone font and afaik its to impossible to do so without root.
Im currently on 4.0 ; will this guide applicable on my phone ? Or is there a way to change font without root. Thanks in advance
Click to expand...
Click to collapse
Personally, I don't mess around with fonts. But, this guide will be applicable for rooting your phone.
Check the following threads for the fonts: https://forum.xda-developers.com/oneplus-3/help/change-font-t3426785
https://forum.xda-developers.com/oneplus-3/help/how-to-change-font-one-plus-3-t3434351
https://forum.xda-developers.com/android/themes/fonts-flashable-zips-t3219827
https://forum.xda-developers.com/oneplus-3/help/cb7-custom-fonts-t3509759
I hope they help.

I wish I had found this guide before but never mind. I was following original rooting guide by Naman on my OP3 running stock OOS 4.0.1. I used twrp v28 of blue spark and as observed by many I ended up in encryption issues and couldn't take nandroid backup so I didn't proceed.
Now, it seems it has been fixed with latest twrp (v11) by blue spark. My /data partition is already f2fs and cache is /ext4.
What steps should I follow to get back correct recovery and hopefully root as well? I am hoping that I do not need to sideload 4.0.1.

mit2nil said:
I wish I had found this guide before but never mind. I was following original rooting guide by Naman on my OP3 running stock OOS 4.0.1. I used twrp v28 of blue spark and as observed by many I ended up in encryption issues and couldn't take nandroid backup so I didn't proceed.
Now, it seems it has been fixed with latest twrp (v11) by blue spark. My /data partition is already f2fs and cache is /ext4.
What steps should I follow to get back correct recovery and hopefully root as well? I am hoping that I do not need to sideload 4.0.1.
Click to expand...
Click to collapse
I've had all of the issues in this guide. So, I decided to post one because nobody posted in-depth guide to deal with OOS v4.0.1
Also, TWRP v28 has issues with encryption being on and F2FS issues too. It caused all of my problems. I was a bit lucky to find TWRP v19 (had a mouse pointer in the middle of the TWRP, no big deal). It worked with EXT4 and F2FS file systems but wasn't perfect due to working only in decrypted mode.
It seems like you don't have any issues. Am I correct? (No password request in TWRP, dm-verity message)
If you don't, go to section "C - PROCEDURE (FLASHING YOUR CUSTOM ROM)".
About file system - leave it be. Only "/data" should be F2FS, "/Cache" and "/System" as EXT4. To much work to change them to F2FS and TWRP formats them to EXT4 when you wipe them.

dbabaev21 said:
I've had all of the issues in this guide. So, I decided to post one because nobody posted in-depth guide to deal with OOS v4.0.1
Also, TWRP v28 has issues with encryption being on and F2FS issues too. It caused all of my problems. I was a bit lucky to find TWRP v19 (had a mouse pointer in the middle of the TWRP, no big deal). It worked with EXT4 and F2FS file systems but wasn't perfect due to working only in decrypted mode.
It seems like you don't have any issues. Am I correct? (No password request in TWRP, dm-verity message)
If you don't, go to section "C - PROCEDURE (FLASHING YOUR CUSTOM ROM)".
About file system - leave it be. Only "/data" should be F2FS, "/Cache" and "/System" as EXT4. To much work to change them to F2FS and TWRP formats them to EXT4 when you wipe them.
Click to expand...
Click to collapse
I do have both issues DM verity message as well as encryption issue. I just stopped doing any further changes and decided to keep using phone as it after I hit password encryption issue with TWRP as I couldn't take nandroid backup.

mit2nil said:
I do have both issues DM verity message as well as encryption issue. I just stopped doing any further changes and decided to keep using phone as it after I hit password encryption issue with TWRP as I couldn't take nandroid backup.
Click to expand...
Click to collapse
Then start from the beginning.
I was scared to death that I bricked my phone, but managed to get out quickly.

[How to Root] [TWRP] Huawei P smart - FIG-LX1

[How To Root] Huawei P smart - Android 8 - EMUI 8.0.0
The Rooting was tested by me on this device:
Model: FIG-LX1
Board: FIG-L31
Build No.: 8.0.0.128(C432)
EMUI 8 - Android 8
"free device"
Whether the following instructions are based on provider-branding is applicable, I could not test
and therefore advise against it.
Warning: Rooting will void the device warranty. Be careful with the newly acquired root rights.
I recommend this only to users who are fit in handling a custom recovery.
This TWRP is not yet perfect and should be used with caution.
Make sure to backup all data on the SD card. (PC, stick, or HD)
Create a backup with the Huawei Backup App.​
Make sure the bootloader is open.
OEM and FRP unlocked,
in the device settings, OEM unlock and USB debugging enabled.
The stock kernel is mandatory.
This is flashed in fast boot mode/ bootloader:
If the device is unroot, it does not need to be done.
fastboot flash kernel kernel.img
(KERNEL.img.header must also be in the adb folder.)
This steps must be followed exactly:
Factoryreset in recovery.
Flashing TWRP in the bootloader: fastboot flash recovery_ramdisk FIGO.img
Boot to TWRP and change the file system of the external SD card:
Wipe> Advanced Wipe> Micro SD card> Repair or Change File System> Change File System> FAT:
Execute with "Swipe to Change".
This change deletes all data on the SD card.
Switch to the Mount menu and unmount all partitions. (remove all hooks)
On the internal and external memory.
Then create a backup:
Backup> Select Storage> Micro SD card> select all partitions,
except cache. Then reboot the device into the system and copy the Magisk Zip to the SD card.
Then install in TWRP: Install> Select Storage> Micro SD card> Magisk-v16(1600).zip> Swipe to confirm Flash.
Is there an error message, installing this Zip via MagiskManager App.
Reboot and if not available, install the MagiskManager App and check the root.
The routing is now complete.
Install Magisk modules only with the app; never with TWRP.
Important:
Never wipe the cache or perform a factoryreset.
[*]Please do not experiment with Xposed. This leads to the bootloop and the Firmware must be completely reinstalled.
[*]Please with each backup, make sure to unmount all partitions again. (internal and external)
Update via Firmwarefinder:
Start Firmwarefinder App and select the appropriate update.
Then on GET AN UPDATE THROUGH DNA.
Then on WITHOUT IMEI.
Availability is displayed.
Now click on REGISTER UPDATE and the registration is displayed.
Then click IN-APP PROXY.
Now activate DNS in the router, enter 81.177.139.39 as addresses and save.
Now go to the WLAN settings on the phone, touch and hold the active connection.
Then change to Network in the menu.
Under Proxy-manual, enter localhost and port 8080 as host names for extended options.
Now only set the IP setting to DHCP. Now start the eRecovery.
Vol.+ and Power with PC connection
There on "Download latest version and recovery".
Then click on "Download and recovery" and register there under Select WIFI.
Now the update is displayed and can be started.
When rebooting, the device lands in the bootloop,
execute a factoryreset in the recovery.
After the update reboot and all changed WLAN settings, also in the router
and reboot it again. If you don't, it'll be over by the time
next OTA update is displayed again and again, since the authorization remains in memory.
Themes-Fix, How to Unbrick, FRP-Unlocking and Bootloader Unlocking I described here. Or follow this thread.
https://www.android-hilfe.de/forum/...t-how-to-root-twrp-root-anleitung.866625.html
It is easy to translate with: https://www.deepl.com/translator
All downloads are here: http://www.mediafire.com/folder/7qdu5je08caya/FIGO
Attention: Changing the oem.info can
cause the phone to lock. OEM/FRP=LOCK
Thread Update 2017-03-28:
A new TWRP is now available. It is version 3.2.1-0.
Original Chinese developer version.
Instructions:
First perform the Huawei data backup.
Flash TWRP per Adb as usual.
Then switch from Chinese to English.
Then assign write and read rights by removing the hook in wipe menu.
Now for security, create a backup without data.
Then Format Data.
Create a new full backup including data. This is possible now that the
formatting is the size of Data = 0.
Now reboot the device and set it up completely new.
Now there is a new and configured data partition.
Then turn OEM and USB back on and boot to TWRP.
Then create a new full backup.
TWRP is now fully functional. Only the MTP mode does not work.
http://www.mediafire.com/file/icpfjhw9eysjlao/FIGO321.img
Good luck!
My special thanks for this original Chinese TWRP for free use,
goes to: "weibo.com/xinkid520", FIRE Team(Developer) and "Team Win Recovery Project".
​Despite careful elaboration, I cannot guarantee that the execution of this manual will not cause any damage to the device or operating system and therefore I do not assume any liability for any damage or malfunction of the hardware and software! If you are still unsure, follow these steps: Follow the instructions only if you or your device is subject to any conditions (model number, Android version, etc.). Read the instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
These warnings must be logical. Please process my comments correctly.
Many thanks to: funkyhuawei.club, Jrummy, Chainfire, Stephen (Stericson) +
Jmz Software, TWRP, osmOsis,Topjohnwu and Huawei Technologies Co., Ltd 华为技术有限公司

it's alive!!! FIGO-LX1C10B120
Men I love you!!!

Thank you monster!!!! [emoji8]

thanks !! are we getting a Huawei P smart forum here soon ??

Themes
I cannot apply themes after Root ?

Hello,
could you also provide the vendor.img?
Would be really nice.
Thx in advance

@enjac
Forum habe ich beantragt.
I have applied for a new forum.
@JahSound77
Flash the cust.img. Then it works.
@Destroyer706
Vendor kannst Du nicht mit adb flashen.
You cannot flash Vendor with adb.
Hey, guys, I got a brick. Can someone save/extract the "kernel. img"
from the 122. Or can someone from the sources compose a kernel. img? I don't have a linux pc.
:crying:

I know I can't flash with adb, but fastboot. I made some changes and want to role back easily.
I try to provide you the kernel img

Themes
I followed your instructions.... fastboot flash cust cust. img
But no luck, after reboot... still can't apply themes from the store .

Destroyer706 said:
I know I can't flash with adb, but fastboot. I made some changes and want to role back easily.
I try to provide you the kernel img
Click to expand...
Click to collapse
I uploaded it now. :good:
https://mega.nz/#F!EplhBBzS!UUgXBRC9DRaExP9HY57FKQ

JahSound77 said:
I followed your instructions.... fastboot flash cust cust. img
But no luck, after reboot... still can't apply themes from the store .
Click to expand...
Click to collapse
You must be logged in to the google account and huawei id. Outside Asia. If it doesn't work, wait one or two days. It'll probably work then. It was like that with me.

Thx. I am already compiling the kernel from source

Destroyer706 said:
Thx. I am already compiling the kernel from source
Click to expand...
Click to collapse
This has never happened to me before. I have always been able to rely on TWRP backups. But without.....

ChinHon said:
This has never happened to me before. I have always been able to rely on TWRP backups. But without.....
Click to expand...
Click to collapse
The thing, I didn't think about, is, I don't know how to repack the image.gz after compiling to flashable boot.img as I don't have a existing boot.img.
Maybe you can advice me.

Can you upload oeminfo file for FIG-LX1 8.0.0.122 (C432) please?
I would like to rebrand my Chinese version (FIG-AL10).

Destroyer706 said:
The thing, I didn't think about, is, I don't know how to repack the image.gz after compiling to flashable boot.img as I don't have a existing boot.img.
Maybe you can advice me.
Click to expand...
Click to collapse
There is no boot. img in the 121 firmware anymore. Only the kernel. img. I flashed that. So I have the bootloop and need the img from 122, so I thought you might be able to extract it from your device.

steveleg said:
Can you upload oeminfo file for FIG-LX1 8.0.0.122 (C432) please?
I would like to rebrand my Chinese version (FIG-AL10).
Click to expand...
Click to collapse
Not included in the UPDATE. APP anymore.
See filelist:

Here is the extracted kernel.img. Hope it helps.
https://mega.nz/#!auo2TAaC!7009dtrK8-uBR39s9fNFf2xCQkEzR1EXURSLBabkuk8

steveleg said:
Can you upload oeminfo file for FIG-LX1 8.0.0.122 (C432) please?
I would like to rebrand my Chinese version (FIG-AL10).
Click to expand...
Click to collapse
I found another update in the net. Here the oeminfo as a self-extracting archive.
https://mega.nz/#!5gcygYLL!Wdlvg5jUo2hv6L7DBtAVT1-0z_WRmSBLuBin7iUGjig

Destroyer706 said:
Here is the extracted kernel.img. Hope it helps.
https://mega.nz/#!auo2TAaC!7009dtrK8-uBR39s9fNFf2xCQkEzR1EXURSLBabkuk8
Click to expand...
Click to collapse
Hey bro, FIGO's alive again. Thanks a million. You're the best.
:good::good:

HELP: Failed to mount: '/data' (invalid argument)

(I think I was using EVA-L19C636B180 Quite sure about the C636 part. TWRP 3.1.0.-3 and using SU but I can't recall the version)
I bricked my phone when I did a factory reset and deleted internal storage and accidentally deleted important files while doing so. I flashed a stock update from the warehouse and completely deleted the system instead. I then flashed Lineage ROM which reinstalled the system but now causes me to get stuck in bootup. When I installed Lineage ROM, I got the following error.
Attached photo
https://imgur.com/a/nx6U5bC

If i'm correct, b180 should be emui 4.1.1 and twrp 3.1.0-3 for nougat, but i'm not sure about that!
Anyway, i might have a fix for your problem.
You should have a unlocked bootloader if you have twrp, so you should see a message before it boots up the system, there you can hold Vol+ (volume up) for 5 seconds and this should bring you to eRecovery.
If your /data in /root is corrupt it should say, that data must be formated. Just do that. If it boots up twrp, follow step 1, if it does it in eRecovery, go to step 2.
1.) After TWRP got opened swipe to allow modifications, then go on "Wipe", in the lower right corner it should say format data, click on it and format data, after that reboot and hold Vol+ again, you should be in the eRecovery again, but this time the message won't be there. Now you should see a few buttons with these options:
Download newest version and recovery
Wipe data/factory reset
reboot
shutdown
Now make sure your phones battery is charged to atleast 85%.When it is charged, go on Download newest version and recovery, this should take you to a screen where you can log in into your Home W-LAN.
Now it should download a package, this takes up-to 1 hour if you have a slow internet connection. For me it takes 15 minutes with a 100mbit connection.
After it downloaded it will reboot and install. Don't press anything on your phone, installation takes around 7-15 minutes, after that it should reboot again and will perform a Factory Reset that will wipe everything on your phone except your SD Card. This will take around 2 minutes.
Now it will reboot into your system and should if everything goes as planned boot up in your emui system.
Now just accept everything, set up your internet and a huawei account. Now you should update your Android to the latest europe version of nougat through system setting. It can take upto a week to recieve the updates. After the updates you can do as you like. I recommend you use tecalotes thread for the HWOTA7 tool to rebrand to AL10 and update to official android oreo, where you can get face recognition with emui, flash a custom rom from the openkirin team and flash a kernel like the ECOKernel, that fixes some hi3650 issues like lag, let's you modify the kernel to your liking and even enable Fast Charge.
Just make sure you never delete something important or install something not intended for your phone like a wrong twrp. If you not know what you're doing or are not sure about something just ask again, this is a forum and we'll gladly help you.
Here are the links to the specific mods i mentioned
Custom ROMs for android oreo: openkirin.net
HWOTA7: https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
the oreo update post #2: https://forum.xda-developers.com/showpost.php?p=77161313&postcount=2
Kernel MOD: https://forum.xda-developers.com/p9/development/kernel-ecokernel-starter-v0-1-t3857029
I hope i could help, have fun!
Many regards

SOLVED:
I installed magic rainbow ROM (https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v3-t3722457) using TWRP (I think any full ROM will do) which fixed the failed to mount issue for /data but left the /vendor, /product and /version still broken then
Use Multi-Tool 8 (https://forum.xda-developers.com/hon...am-mt-t3523923) to reinstall stock recovery and recovery2 which deleted TWRP and restored the deleted eRecovery
Then Take empty SD card formatted in NFTS
Put in dload folder the rollback UPDATE.APP file taken from http://download-c1.huawei.com/downlo...65&siteCode=it and install it using dload method
Last, put in dload folder b182 UPDATE.APP file from http://download-c1.huawei.com/downlo...83&siteCode=it
credit to @bomba697 for the last part (all I thought of was install magic rainbow rom)

[RECOVERY][TB-X605F/L][OFFICIAL] TWRP 3.6.x for Lenovo Smart Tab M10

This version of TWRP works on both the TB-X605F (wifi) and TB-X605L (LTE). It does not work for the TB-X605FC/FL (Tab M10 FHD Rel).
Warning: this TWRP is for the Lenovo Smart Tab M10 with the Snapdragon 450 (SDA450) chipset. This image will not work for the second gen M10 (TB-X606F/L), which use a Mediatek SOC. See this thread.
For the M10 HD (TB-X505F/L), see this thread. For the TB-X505X, see this thread.
Code:
#include <std_disclaimer.h>
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Possible issues with TB-X605L
If the latest version of TWRP for TB-X605F doesn't work for your TB-X605L model, try version 3.4.0-0 from twrp.me.
Installation
TWRP for this device is officially supported. You can download it from twrp.me or in the TWRP App (from the PlayStore). Installation instructions are included on twrp.me.
It is recommended that you also install Magisk. This will ensure TWRP remains your default recovery.
Step-by-step guide
download TWRP to your PC (see the Download section below)
download magisk.zip to your MicroSD or OTG device. Get the latest Magisk zip file here.
if your bootloader is already unlocked, go to step 4. To unlock bootloader:
on tablet: go to Settings->System->About and press "Build number" 7 times to enable Developer Options.
on tablet: go to Settings->System->DeveloperOptions. Turn on: "OEM unlocking" and "USB debugging".
connect tablet to your computer. Tablet will ask for permission to "Allow USB debugging". Tick "always allow" and select "OK".
backup any files you want to keep to an external device (MicroSD/OTG/computer), because the next step will wipe all your photos, files, google account etc on the tablet.
Now unlock the bootloader:
Code:
adb reboot bootloader
fastboot oem unlock-go
fastboot reboot
flash the twrp image:
Code:
adb reboot bootloader
fastboot flash recovery twrp.img
if you haven't loaded Magisk yet, go to step 6. If you have already loaded Magisk, you can just reboot and you're finished:
Code:
fastboot reboot
adb reboot recovery
load Magisk (step one): reboot to recovery. Do not reboot into the system, because it will over-write TWRP with stock recovery. If that happens, go back to step 4 and start again. When you issue the reboot command (below), you have to immediately press the button combination to reboot to recovery (TWRP). Here are the steps:
issue the reboot command:
Code:
fastboot reboot
immediately press and hold all three buttons (Pwr+VolUp+VolDown). The tablet might reboot twice. Release all the buttons when you see the TWRP screen, or hear your PC acknowledge that ADB is connected.
load Magisk (step two): flash Magisk. In TWRP:
select "Install"
use "select storage" to locate device you stored magisk.zip on.
press the OK button
select the Magisk zip file
swipe to confirm Flash
when Magisk is finished, hit the back button to go back to main TWRP screen.
select "Reboot" then "System"
if the Magisk Manager app wasn't automatically loaded, you can get it here.
finished!
If you prefer to use button combos, rather than fastboot/ADB commands:
Vol Down + Power = fastboot mode
Vol Up + Vol Down + Power = recovery mode
Changelog
Code:
02/03/2022 - TWRP 3.6.1_9: new TWRP release
23/11/2021 - TWRP 3.6.0_9: new TWRP release
01/01/2021 - TWRP 3.5.0-0: new TWRP release
21/11/2020 - TWRP 3.4.0-1: new official version with SPL patch
19/11/2020 - promoted security patch level to 2099-12-31. No need to worry about SPLs ever again.
02/09/2020 - promote security patch level to 2020-08-01 for TB-X605F_S210208_200807_ROW
06/08/2020 - officially supported
31/07/2020 - upgrade to TWRP 3.4.0-0
- data decryption working (security patch 2020-04-01)
- landscape mode (by popular demand)
- add more partitions to Backup options
15/01/2020 - reverted to API 28 (Android Pie)
- renamed "sdcard1" to "external_sd"
- changed [ro.build.incremental.version] in preparation for OTA #4
24/11/2019 - fixed date/time & EDL reboot mode
- dropped back to API 27
20/11/2019 - initial commit (API 28) - encryption/decryption not working
Downloads
official​
TWRP for X605F: twrp.me
Source code
github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-9.0
github.com/TeamWin/android_device_lenovo_X605F (official)
github.com/Yahoo-Mike/recovery_device_lenovo_X605F (unofficial)
FAQ
See the third post for answers to some FAQs like:
Will this TWRP work with other M10 and P10 devices?
Why is my "Data" partition empty (0 MB)?
how do I root my device?
Credits
The guys at TeamWin Recovery Project.
Everyone whose device trees I plagiarised from GitHub.
The amazing work of @Chaser42, @Long_Sam and others to get this project started.
XDA:DevDB Information
X605F Recovery, Tool/Utility for the Lenovo Thinkpad Tablet
Contributors
Yahoo Mike, Chaser42
Source Code: https://github.com/TeamWin/android_device_lenovo_X605F
Version Information
Status: Testing
Created 2019-11-19
Last Updated 2022-05-22 (v3.6.1 and warning for TB-X605L)

Encryption/Decryption
When you load the stock ROM, it creates and automatically encrypts the data partition. If you are not using the correct TWRP version, the data partition might be empty (0 MB). This is because TWRP failed to decrypt the data partition.
If your data partition is 0MB in TWRP, make sure you have loaded the latest version of TWRP (Nov 2020 or newer). Older builds required the security patch levels to match on TWRP and your system.
If you want to remove encryption completely, then you can use the dm-verity-forceencrypt tool. @turboperson123 has put together some instructions to remove encryption. If you've already loaded TWRP, then you only need to follow steps 6 and 7 from that post. @turboperson123 's method uses @Zackptg5 's Universal DM-Verity, ForceEncrypt, Disk Quota Disablers tool to remove encryption and dm-verity.

FAQs
Can I use this TWRP on other M10 and P10 tablets?
There are quite a few variants of these Tabs that use the Snapdragon 450 (SDM450) chipset:
TB-X605F (Tab M10 wifi) - tested working this TWRP
TB-X605L (Tab M10 LTE) - tested working with TWRP ( thanks @alexupsa )
TB-X705F/L (Tab P10) - no. Use the twrp available on this thread.
For the TB-X505F/L (M10 HD) see this post.
NOTE: the TB-606F/L (M10 2nd gen), TB-X605FC (M10 FHD) use different chipsets, so this TWRP won't work.
Why is my "Data" partition 0MB?
See the second post in this thread.
What should I backup?
Short answer: everything.
But the bare minimum might include:
System Image
Vendor Image
Firmware/Modem
Persist
Data
Cache
Boot
How do I root my device?
To root your device, here are the instructions for the:
X705F (thanks to @Chaser42)
X605F/L - follow steps 6 & 7 in the OP above. If you don't want to load TWRP, then try something like @Long_Sam's patched boot.img method.
X505F/L - follow the "step by step guide" in the OP above. Just make sure you use twrp for X505F (not for X605F).
How do I load OTAs with TWRP?
Note: if you ran the dm-verity-forceencrypt tool to unencrypt your /data, then the steps below will not work.
select "uninstall" in the Magisk Manager app. If MM doesn't reboot the system, then reboot - this will re-install stock recovery.
install the OTA (either in the system or using stock recovery).
re-flash TWRP (for the new security patch level)
re-install Magisk

TB-X605L working properly. Thank you!
TB-X605L working properly. Thank you!

Yahoo Mike said:
This is a work in progress. Volunteer testers are very welcome.
Click to expand...
Click to collapse
Wow...
That's really huge...
As we say here : "Monsieur, chapeau bas !"
Long_Sam

Lenovo has released quite a few variants of the Tab M10 now. I'm not sure this TWRP will work on all of them.
There are now even variants of a variant !
Code:
[B]M10[/B] with SDM-450 models: X605F (wifi) & X605L (LTE)
[B]M10 HD[/B] with SDM-429 models: X505F (wifi), X505L (LTE) & X505X (LTE Bands 1,2,3,4,5,7,8,20,38,40)
[B]M10 FHD[/B] with SDM-450 models: X605FC (wifi) & X605LC (LTE)
The M10 I have is shipped with a Snapdragon 450 (SDM-450) chipset & Hardware Code 63. But I see on their US site that Lenovo are now putting the SDM-429 in the X605. This might cause a problem with TWRP. I'm not sure if the kernels will be compatible.
The TWRP I've posted is for the X605F/L SDM450 (HW=63). I might need to compile a different TWRP for the SDM429 versions of the X605 & the X505.
If your X605 or X505 shipped with the SDM429, can you let me know if this TWRP works ? I need to know the Hardware Version, CPU and Hardware Code. Hardware Version and CPU are in System->About. The Hardware Code is in brackets after the S/N on the sticker on the back of the tablet, eg S/N Hxxxxxxx (63).
If you have an X605FC/LC, let me know if this TWRP works. I think it will, but I want make sure.

I have one with the 429 TB-X505F SD429 HW71 If i get some time today I might be bale to try it. I'll post soon as I do.

This morning I successfully compiled and ran the P10 kernel source on my M10. I had to tweak the config a bit. I tested it in TWRP. No problems.
Tomorrow, I'll inject it into the boot.img of the system ROM and see what happens. If it is mostly stable, then we're on the way to LOS for the M10. If it's completely stable, I'll push the source up to github.
I'll continue to use the stock kernel for the released versions of TWRP in this thread, though.
Thanks to @clsA for helping me work out that the M10 kernel is a subset of the P10 kernel.

@Yahoo Mike
thx for the twrp
succesfully flashed on my X605L
"Stock recovery image (recovery_stockROM.img) from TB-X605F_USR_S200065_1905280020_Q00332_ROW - just in case something goes wrong & you need to restore stock recovery. Only use this image on a TB-X605F. If you need it for any other variant, just ask in this thread and we'll track it down for you."
do you have the stock recovery for the X605L ?
how can i backup "DATA" inside twrp ?
will this help ?
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389

OSIRIS2010 said:
...
do you have the stock recovery for the X605L ?
Click to expand...
Click to collapse
Now I think of it, you don't need it. If TWRP fails to flash, then stock recovery will still be there. If stock recovery is still not loading, just boot into the system and shutdown. When you shutdown, the system will re-flash stock recovery for you.
OSIRIS2010 said:
...
how can i backup "DATA" inside twrp ?
Click to expand...
Click to collapse
Have a look at the second post.
TL;DR...the dm-verity-forceencrypt tool will do it. But it will break the next OTA. The unencrypted P10 guys are having problems at the moment with this.
I've tried to get TWRP to unencrypt the data partition, but I can't get KeyMaster to initialise successfully. Maybe the next version of TWRP will be able to do it.

Yooo. Sorry I took so long works been crazy. I cant get it to reboot into twrp recovery. Its flashes the 605 recovery then I follow the next steps in the guide but I can only get it to reboot to the stock recovery screen. Run the reboot recovery command then immediately hold the volume + - down along with power. I tried a lot I let reboot twice then let off, and nothing then I tried several more times. Reflashing then the next step. I must not be holding my mouth...err I mean pushing the buttons right or the recovery just isn't gonna work. Add I'm very newbie at rooting and customizing. I've I've rooted one phone. A 70$ moto g5 plus I got off Ebay that was basically brand new. Installed twrp recovery and magisk. I bought that cause I have SD note 9 I cant root and have this need to play YouTube videos in my truck lol. Let me know if you have any suggestions I can try. Or ideas that might make it work. I pretty much fubard the tab and (at a different time) before I tried this recovery and was able to reflash stock img though odin.

11mackey11 said:
Yooo. Sorry I took so long works been crazy. I cant get it to reboot into twrp recovery. Its flashes the 605 recovery then I follow the next steps in the guide but I can only get it to reboot to the stock recovery screen. Run the reboot recovery command then immediately hold the volume + - down along with power. I tried a lot I let reboot twice then let off, and nothing then I tried several more times. Reflashing then the next step. I must not be holding my mouth...err I mean pushing the buttons right or the recovery just isn't gonna work. Add I'm very newbie at rooting and customizing. ...
Click to expand...
Click to collapse
Don't be too hard on yourself...you've done well to get this far.
I just had a quick look at the kernel for the X505F. It's very different from the X605F. So this TWRP definitely won't work for you. Sorry.
If you want me to build a TWRP for the X505F, PM me and we'll work something out.

How do you remove twrp I think that or magisk is giving me the booting issues. Half the time I reboot for things it gets stuck. Not sure if it's root or twrp but I can't seem to remove either.

cbomb1337 said:
How do you remove twrp I think that or magisk is giving me the booting issues. Half the time I reboot for things it gets stuck. Not sure if it's root or twrp but I can't seem to remove either.
Click to expand...
Click to collapse
If you uninstall Magisk, then the system will overwrite TWRP with stock recovery the next time you reboot. Just tap "uninstall" in the Magisk Manager app. You can also remove Magisk from TWRP following these instructions.
What kind of boot issues are you having? Are you using a TB-X605F with SDA450? Or is it something similar?

I am using Tb 605f it seems to be booting fine now after removing this riru module and edxposed. I'll just leave that and stick with just viper 4 Android lol
Do you know if them modules for increasing speed work? I think one of them was called fde and there the doze one.

cbomb1337 said:
I am using Tb 605f it seems to be booting fine now after removing this riru module and edxposed. I'll just leave that and stick with just viper 4 Android lol
Do you know if them modules for increasing speed work? I think one of them was called fde and there the doze one.
Click to expand...
Click to collapse
Good to hear it's all working again.
Sorry, I haven't tried any of those tweaks.

Lenovo have updated the stock ROM they serve for the TB-X605F through LMSA rescue. It's now at TB-X605F_USR_S210126_1910290024_Q00332_ROW. This is the latest update. There are no OTAs to apply. The M10 is due for a security OTA pretty soon, though. The P10 has already received it.
Unfortunately, it's no longer possible to post a direct link to Lenovo's website for this ROM. You'll have to use LMSA to get it.
FYI. Lenovo have changed how they serve the stock ROM. The ROM is now kept at rsdsecure-cloud.motorola.com. LMSA seems to generate (or request and receive) a one-off time-limited credentialed ticket for the download. You can't download the zip files without the credentials attached to the URL.
If you really want to, you can still intercept the URL in download_resources.json in the LMSA download folder.

is there anything new in the update. i might hold of because i dont want to lose root.

cbomb1337 said:
is there anything new in the update. i might hold of because i dont want to lose root.
Click to expand...
Click to collapse
No, there's nothing new. This isn't really an update, it just seems to be a consolidation of the old stock ROM and incremental OTAs.

This is only for M10 wifi (TB-X605F) with SDA450.
The latest OTA for TB-X605F has just landed. It's available on your tablet, or directly from: TB-X605F_USR_S210126_191029_Q00332_ROW_TO_TB-X605F_USR_S210152_200120_Q00332_ROW_WCE26E2CD5.zip.
The update takes the M10 to:
Code:
build: TB-X605F_USR_S210152_200120_ROW
security patch: 1 January 2020
kernel: 3.18.120-perf-gd60e12b6-dirty
If you have TWRP and root, you'll need to:
select "uninstall" in the Magisk Manager app
install the OTA (from SD card) in recovery and reboot
re-flash TWRP
re-install Magisk
only if you unencrypted the data partition
If you have unencrypted your data partition, it will be re-encrypted during this process. Make sure you back it up before you start the OTA. You might also need to restore the TWRP backup you made of the vendor partition, before the OTA will run. Once the OTA, TWRP and Magisk are installed, you can re-run the dm-verity tool.

Installing, Updating, Backup and Restore Guide for OP6/6T

This is a bit late but why not. THIS IS A COMPILATION OF ALL THE OS METHODS YOU NEED FOR THE OP6/6T.
ENJOY my guide
DISCLAIMER:
*I am not responsible for bricked devices, damage to your device*
Sorry for a long list of methods, some work for others and some don't. But I recommend to pick a method and stick to it. Maybe read the part at the top as some have notes about mine or someone else's experience/recommendation. Don't skip steps and follow each step.
If stuck, just ask and I or anyone else will try and help
I am here to post methods for anyone who is interested/need help. I have tested these myself and helped others who may be struggling
Download
The guide has loads of files/ zips/ tools to use/flash/install. But no worries as everything can be downloaded and there are links AT THE BOTTOM OF THIS THREAD (NOT COMMENTS) to where to download:
SDK Platform Tools (Fastboot tools) from Developer Android
TWRP from mauronofrio
Magisk from topjohnwu
Gapps (Google Apps) from NikGapps. I recommend omni for ROMs that don't include Gapps.
Fastboot ROM for OP6 + OP6T from mauronofrio
MSMDownload tools for OP6 + OP6T from Some_Random_Username
IMPORTANT NOTES!
YOU REQUIRE Platform Tools (Fastboot Tools) IN ORDER TO USE THE METHODS IN THIS GUIDE AS TWRP NEEDS TO BE INSTALLED!
YOU NEED TO HAVE A UNLOCKED BOOTLOADER AS WELL!
For GAPPS, u can use the same or a updated version of the package. But has to be the same type u used to install it like (stock, full, Omni, basic, etc). ONLY FLASH/INSTALL IF the RESTORE SCRIPT DIDN'T SHOW UP during a DIRTY FLASH/UPDATE AND ONLY FLASH AFTER REBOOTING TO RECOVERY AFTER FLASHING/INSTALLING A OS/BUILD ZIP FILE!
How to get Platform Tools
These tools are used to install TWRP, to unlock the bootloader of your device and is needed to use the METHODS in this guide.
Download the platform tools.zip of your software platform (Mac, Windows, Linux)
Extract the platform-tools.zip
To use it go into your platform-tools folder
Press shift + right-click and choose command prompt or PowerShell
Connect your device when it's in fastboot mode and done
How to install TWRP
Sadly this Guide is for Windows, but other platforms like Mac or Linux can be found online.
YOU CAN USE THIS METHOD TO INSTALL A NEWER VERSION OF TWRP TOO
You need to have downloaded Platform Tools which the link is attached below.
Transfer the TWRP.img file into the platform-tools folder
Now transfer TWRP.zip into your device's internal storage. (connect -> allow file transfer -> drag and drop files)
If you want root download and transfer magisk.apk and the link is supplied below. Also, RENAME from .apk to .zip
Now we must boot into fastboot mode. (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Now connect your device to a Windows device
Press shift + right-click. Choose command prompt or PowerShell
Enter "fastboot devices" and your device should be displayed if it's connected
Type "fastboot boot twrp" file name (do twrp + press tab) and press enter
Then you should be booted into TWRP
Enter the password and swipe to allow modifications
Press install and find your TWRP.zip file
Swipe to confirm Flash
If you want root do this
Press the back arrow and find your magisk.zip
Swipe to confirm Flash
Reboot to the system and done
Otherwise, just reboot to system. Up to u
Installing a Custom ROM
Install Custom ROM on OP6T from OOS
Make sure u have BACKED UP your device and have the latest OOS installed in both slots. If u do, go to Method 3.
If u have finalize.zip, go to Method 2.
Method 1
If u don't have OOS installed in both slots or finalize.zip, use this method.
Transfer OOS.zip file, TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to Bootloader
Boot TWRP
Flash OOS + TWRP
reboot recovery
Flash OOS + TWRP
Reboot recovery
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Reboot to system
Otherwise, just Format data -> reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Method 2
If u have finalize.zip, do this method. Using finalize is way quicker as there's less flashing and rebooting.
Transfer OOS.zip file, finalize.zip, TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to Bootloader
Boot to TWRP
Flash OOS + finalize
Boot to Bootloader
Boot to TWRP
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Reboot to system
Otherwise, just Format data -> reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Method 3
Once you have installed OOS in both slots do this part.
Transfer TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to Bootloader
Boot to TWRP
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Reboot to system
Otherwise, just Format data -> reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Installing Custom Rom not from OOS
You can use finalize method or just flash OOS + TWRP way. The finalize way is there for some who like less flashing and rebooting.
Using the methods in Install Custom ROM on OP6T from OOS
Using the old way, use Method 1
Using finalize.zip, use Method 2
Remember to factory reset (wipe, but no need to wipe internal storage)
Backing Up OOS and Custom ROM
Make sure u have installed the latest TWRP version from mauronofrio
You should use TitaniumBackup or Migrate to back up your apps and contacts.
Also, have a copy of your Internal Storage folders if u have important files.
TWRP Backup backs up your OS like Apps, settings and set up, but not internal storage.
NEVER BACKUP SYSTEM AND VENDOR! ONLY SYSTEM.IMG or VENDOR.IMG IF YOU HAVE TO!
Restoring it makes going back way easier like you have never left
Or you can go manually and try and restore everything, but why do that when you got TWRP?
I do both ways of backing up
Backing up OOS
Boot TWRP recovery
Choose Backup
Choose boot, data. YOU DO NOT NEED TO BACKUP System.img and Vendor.img!
Swipe to backup
Once done, either boot to system or mount
Transfer the whole TWRP folder onto a storage device
Done
Backing up a Custom ROM
Boot TWRP recovery
Choose Backup
Choose boot, data, system.img, vendor.img
Swipe to backup
Once done, either boot to system or mount
Transfer the whole TWRP folder onto a storage device
Done
Restoring OOS and Custom ROM
Restoring OOS TWRP Backup
To restore OOS use either fastboot ROM or MSM. Fastboot is the fastest and easiest way if u have a TWRP backup which there's a method to how to make one in this guide. BUT if you are restoring to go back to stock OOS then use MSM
I use Fastboot ROM restore for that too as we are restoring our data anyways and also for switching/installing a custom ROM. Much easier in my experience.
DOWNLOAD FULL ZIP OF OOS version of your TWRP backup otherwise you could risk doing the whole restore method again OR setup from SCRATCH! IF you aren't restoring a TWRP backup, I recommend either TRANSFER or DOWNLOAD via WiFi or oxygen updater, a UPDATED version of OOS AFTER doing either fastboot ROM or MSM restore methods. As they restore a old version of OOS!
Restoring using Fastboot ROM
Download fastboot ROM of your choice using the link in the Download Link section.
Extract/ un-zip
Boot your device into fastboot mode (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Click flash-all.bat
Restoring using MSM Download Tool
Download latest MSM version of your choice using the link in the Download Link section.
Extract/ un-zip
Click on MSM tool .exe file
Turn off device
HOLD BOTH volume buttons
Connect your phone
Wait for your device to be connected and it should show as green
Click verify to check and press start
Wait till phone reboots
The setup device and u can carrying on restoring your device if u don't want a unlock bootloader or return to what your device was like before.
Go into developer options
Allow OEM unlocking
Reboot to bootloader
Enter "fastboot devices" to check your device is connected
Enter "fastboot oem unlock"
Swipe for yes
Then it will reboot again
continue to the next method
For both fastboot and MSM
Once booted into system, set it up and update to OOS version of your TWRP backup.
Download the full zip using the link in the Download Link section.
Transfer the OOS .zip to internal storage.
Go into settings -> system update -> Update via local upgrade -> find zip file and press install
Do this twice to make sure you have installed that version of OOS in both slots
Boot to bootloader
Boot TWRP
Install TWRP
Reboot recovery
Transfer whole TWRP Folder into internal storage
Restore only boot and data
Swipe to restore
If you have backed up your internal storage folders do this
Reboot to recovery
Transfer all your internal storage folders
Reboot to system and done
Otherwise, just reboot to system. U can update OOS as well if it's outdated. The method is below to update OOS with ROOT. Up to u
RESTORING TWRP BACKUP HAS ISSUES ON THESE ROMs
CrDroid (Method 1 + 2 don't work). Method 3 works (install Gapps if the ROM doesn't have it!)
Restoring a Custom ROM TWRP backup 1
I tried using this method, but it didn't work for me.
You can use this method to switch ROMs too
Boot TWRP Recovery
Flash OOS + Finalize
Boot to bootloader, boot TWRP
Flash TWRP
Reboot Recovery
Transfer twrp backup
Restore System.img, Vendor.img and boot
Boot to system and setup system
Reboot to recovery
Restore data
Reboot system. Done
I had an issue with this method where rebooting system it was from fresh and my data didn't restore. If this happened to you, then do method 2 (Restoring a Custom ROM TWRP Backup 2)
Restoring a Custom ROM TWRP Backup 2
The first method didn't work for me. But this method did
Restore fresh like you're going back to OOS.
Choose one method. Fastboot or MSM method.
I prefer the fastboot method.
Download fastboot ROM using the link in the Download Link section.
Extract/ un-zip
Boot your device into fastboot mode (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Click flash-all.bat
Once booted into system, set it up briefly and DO NOT RESTORE ANYTHING.
Boot to bootloader
Boot TWRP
Install TWRP
Reboot recovery
Transfer whole TWRP Folder into internal storage
Restore everything (System.img, vendor.img, boot.img and data)
Swipe to restore. If data couldn't restore then boot system, setup system, boot TWRP and restore data.
Reboot system. The first reboot might go dodgy and it did for me.
Reboot system and transfer all your internal storage stuff
done
If this did not work still. Then do the 3rd method...
Restoring a Custom ROM TWRP backup 3
If the previous 2 methods has failed for you. Then try this.
Restore fresh like you're going back to OOS.
Choose one method. Fastboot or MSM method.
I prefer the fastboot method.
Download fastboot ROM using the link in the Download Link section.
Extract/ un-zip
Boot your device into fastboot mode (Either do it with the advanced reboot in developer options or power off device -> boot recovery Vol - + power -> boot to bootloader or power off device -> press Vol Up + Vol down + power)
Click flash-all.bat
Once booted into system, set it up and update to OOS version of your TWRP backup.
Download the full zip using the link in the Download Link section.
Transfer the OOS .zip to internal storage.
Go into settings -> system update -> Update via local upgrade -> find zip file and press install
Do this twice to make sure you have installed that version of OOS in both slots
Transfer TWRP.zip, Build.zip (Custom ROM zip file) into internal storage.
Boot to bootloader
Boot TWRP
Install TWRP
Reboot to Recovery
Flash Build.zip (Custom ROM zip file)
Flash TWRP
If the ROM doesn't have GApps included do this
Reboot to recovery
Flash Gapps if not included
Format data
Otherwise, just Format data -> reboot to recovery. Up to u
Reboot Recovery
Transfer twrp backup
Restore data
Reboot system. Done
If it still fails, repeat steps 1 to 15. But restore everything and you should be back on your custom ROM like you never left.
Updating OOS and Custom ROM
Update OOS with Root (Magisk)
Always do a TWRP backup before updating your OS in case
Download the full zip file of the latest OOS, transfer the zip file to internal storage NOT IN ANY FOLDER
Download and transfer twrp.zip file to internal storage
Go into settings, system update, update via local upgrade and choose the file
Wait till the installation has finished. If failed TRY AGAIN!
DO NOT REBOOT!
Go into Magisk Manager, modules
Find the twrp zip file and install TWRP
DO NOT REBOOT!
Go into Magisk Home
Press install
Press install via inactive slot
Reboot system and done
You will reboot into the next slot
You don’t have to repeat the installation to install the latest OOS in the other slot. But you should and I use this method many times and has never let me down.
Updating OOS without root
Go to System Update -> find the update install and reboot.
Or download the zip -> transfer to internal storage -> update via local upgrade -> reboot and done
Update a Custom ROM
Method 1
Always do a TWRP backup before updating your OS in case
Use this method just to update the ROM.
Boot recovery
Flash new version + twrp
Reboot recovery
Flash new version + twrp
If the ROM doesn't have GApps included,
The restore script should show up during the installation of the new ROM.zip
BUT if the restore script DIDN'T pop up do this
Reboot to recovery
Flash Gapps if not included
Reboot to system
Otherwise, reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Method 2
This method uses finalize.zip
Boot recovery
Flash new version + finalize + twrp
If the ROM doesn't have GApps included,
The restore script should show up during the installation of the new ROM.zip
BUT if the restore script DIDN'T pop up do this
Reboot to recovery
Flash Gapps if not included
Reboot to system
Otherwise, reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system. Up to u
Updating vendor
Use Method 1 and 2 for ROMs with Gapps. Use Method 3 for ROMs with no Gapps included.
Method 1
If u haven’t updated your Custom ROM and your Vendor… You can use this method to update both or just the vendor.
Boot recovery
Flash OOS + twrp
Reboot recovery
Flash OOS + twrp
Reboot recovery
Flash Custom ROM + twrp
Reboot recovery
Flash Custom ROM + twrp
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system
Method 2
This method uses finalize.zip
Boot recovery
Flash OOS + finalize + twrp
Reboot recovery
Flash Custom ROM + finalize + twrp
Otherwise, reboot to system. Up to u
If you want root do this
Reboot to recovery
Flash Magisk
Reboot to system and done
Otherwise, just reboot to system
Method 3
This method is for ROMs with no Gapps included
You can use this method as well for updating to a vendor that has a NEWER ANDROID version like from OOS 10 to OOS 11 vendor.
Boot recovery
Flash OOS + Custom ROM + twrp
Reboot recovery
Flash OOS + Custom ROM + twrp
If u flashed GApps, the restore script should show up during the installation of the ROM.zip
If the GApps script didn't show up do this
Otherwise, skip step 3
Flash Magisk if u want root, otherwise skip step 2
Reboot to recovery
Flash Magisk
Flash Gapps
Reboot to system and done
Download Links:
SDK Platform Tools (Fastboot Tools) Here
OOS versions for OP6 (under Signed Flashable zips) Here
OOS versions for OP6T (under Signed Flashable zips) Here
TWRP for OP6 Here
TWRP for OP6T Here
Magisk Here
NikGapps Here
Stock Fastboot ROM for OP6 Here
Stock Fastboot ROM for OP6T Here
MSMDownloadTool for OP6 Here
MSMDownloadTool for OP6T Here
TitanumBackup App Here
Migrate App Here
Credits:
@mauronofrio For his amazing work on the TWRP recovery and Stock Fastboot ROMs for OP6/6T
@topjohnwu For his work on Magisk
@Nikgapps For their work on creating Gapps
@Some_Random_Username For his Collection of MSMDownloadTool for OP6/6T
@OPTeam For the collection of OOS zips for OP6/6T
@dreamwhite For the method (Method 3) of updating the vendor which works wonders for ROMs with no GApps included

First

Hey Guys,
Need a some expert advice please.
Long story short. I need to replace my OP 6T McLaren's battery as I have serious degradation in battery capacity (73% Serious Loss), meaning the battery is no longer charging to 3700mAh, max charging atm is around 2600mAh, which it drains very quickly. FYI Anything above 80% is the limit for average performance, >90% is best. You can use the OP Diagnostic App 1.0.0.9 to determine your own status. Does not work on all OP devices above 6 btw. Maybe other versions work. Anyway, will be getting OP to change the battery (no real local guys I can trust tbh, all Sammy & Apple guys...) and they want me to Factory Reset the device (complete wipe including internal storage (backed up already to PC)) before sending the device to the OP Repair Center for the obvious reasons of Privacy & Security.
On my device, I have a suite of apps that are no longer available to install with APK specially Signed, but won't be able to re-install (long story & can discuss in a PM more if there is an interest to help on this). These APK will not work any other way, I've tried! This being said, I know that TWRP Nandroids work well & have been doing these backups for yrs and have restored backups with these apps installed and it works! But I have not had to restore any as of late and TWRP Backup has somewhat changed in regards to the partition selections available. See TWRP Options pic below.
When OP returns the device to me, it will mostly likely be on the latest release of 10.3.11 (Hopefully).
Here is the current setup and runs perfectly!
OOS 10.3.11
TWRP: twrp-3.5.2_9-0-fajita
Magisk 23
The last Nandroid done today (No PW for good measure, but secured locally offline), I selected all partitions. Is this the best way to insure I get my full device backup restored?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm guessing that I will have to, Unlock the Bootloader, reinstall TWRP same version the Nandroid was created with in order to restore that backup.
Looking forward to hearing from you guys to make the best decision before proceed with the factory reset.
Thanking you all in advance for your time & assistance!
Cheers!

plepew said:
Hey Guys,
Need a some expert advice please.
Long story short. I need to replace my OP 6T McLaren's battery as I have serious degradation in battery capacity (73% Serious Loss), meaning the battery is no longer charging to 3700mAh, max charging atm is around 2600mAh, which it drains very quickly. FYI Anything above 80% is the limit for average performance, >90% is best. You can use the OP Diagnostic App 1.0.0.9 to determine your own status. Does not work on all OP devices above 6 btw. Maybe other versions work. Anyway, will be getting OP to change the battery (no real local guys I can trust tbh, all Sammy & Apple guys...) and they want me to Factory Reset the device (complete wipe including internal storage (backed up already to PC)) before sending the device to the OP Repair Center for the obvious reasons of Privacy & Security.
On my device, I have a suite of apps that are no longer available to install with APK specially Signed, but won't be able to re-install (long story & can discuss in a PM more if there is an interest to help on this). These APK will not work any other way, I've tried! This being said, I know that TWRP Nandroids work well & have been doing these backups for yrs and have restored backups with these apps installed and it works! But I have not had to restore any as of late and TWRP Backup has somewhat changed in regards to the partition selections available. See TWRP Options pic below.
When OP returns the device to me, it will mostly likely be on the latest release of 10.3.11 (Hopefully).
Here is the current setup and runs perfectly!
OOS 10.3.11
TWRP: twrp-3.5.2_9-0-fajita
Magisk 23
The last Nandroid done today (No PW for good measure, but secured locally offline), I selected all partitions. Is this the best way to insure I get my full device backup restored?
View attachment 5319753
I'm guessing that I will have to, Unlock the Bootloader, reinstall TWRP same version the Nandroid was created with in order to restore that backup.
Looking forward to hearing from you guys to make the best decision before proceed with the factory reset.
Thanking you all in advance for your time & assistance!
Cheers!
Click to expand...
Click to collapse
Idk if u have read Mauronofrio's XDA thread on TWRP backups. BUT NEVER BACKUP OR RESTORE SYSTEM OR VENDOR! From my guide, you don't need to backup vendor.img or system.img or anything else that's not Boot or Data FOR OOS. Make sure you have everything like a copy of everything folder/file in your internal storage before u wipe it.
BUT because you're going to wipe your device. U should have a copy of everything in case but don't backup system or vendor as they're useless and will crash your system if u restore those!
After you've got your device from repair, follow my method to restore OOS TWRP backup on your device and YOU'LL only NEED TO RESTORE BOOT + DATA. Once you have booted back to your system, everything should be there like you never left, but transfer your internal storage stuff as some apps store files in your internal storage. Once that is done, that should be it and it would be like you've never left
If the TWRP backup restore doesn't work let me know, but from my experience with going back to OOS via my TWRP backup I only backed up and restored boot + data for OOS. Custom ROMs are different but isn't the case for you

Extreme_Ninja2099 said:
Idk if u have read Mauronofrio's XDA thread on TWRP backups. BUT NEVER BACKUP OR RESTORE SYSTEM OR VENDOR! From my guide, you don't need to backup vendor.img or system.img or anything else that's not Boot or Data FOR OOS. Make sure you have everything like a copy of everything folder/file in your internal storage before u wipe it.
BUT because you're going to wipe your device. U should have a copy of everything in case but don't backup system or vendor as they're useless and will crash your system if u restore those!
After you've got your device from repair, follow my method to restore OOS TWRP backup on your device and YOU'LL only NEED TO RESTORE BOOT + DATA. Once you have booted back to your system, everything should be there like you never left, but transfer your internal storage stuff as some apps store files in your internal storage. Once that is done, that should be it and it would be like you've never left
If the TWRP backup restore doesn't work let me know, but from my experience with going back to OOS via my TWRP backup I only backed up and restored boot + data for OOS. Custom ROMs are different but isn't the case for you
Click to expand...
Click to collapse
Wow, thanks for the quick reply!
I have not read Mauronofrio thread and will do!
I completely missed the system & vendor piece in your instructions....my bad!
So just to confirm, my backup that I have done with all checked off is good, but only restore Boot & Data with an exact duplicate of the current Internal Storage...right?
Going forward, when creating the Backup, just select Boot & Data and I'm good to go? Or select all Except: System Image(only) & Vendor options (both)?
Also, just so I can understand a bit better, "System" is the actual OOS? Meaning, if I restore Boot & Data on any OOS, all my apps and data will be as I never left, or we should always restore on the OOS that was current at the moment of the Backup (which I have always done in the past).
PS. I may just do the backup again, just to make sure SYSTEM & VENDOR are not there for good measure!

plepew said:
Wow, thanks for the quick reply!
I have not read Mauronofrio thread and will do!
I completely missed the system & vendor piece in your instructions....my bad!
So just to confirm, my backup that I have done with all checked off is good, but only restore Boot & Data with an exact duplicate of the current Internal Storage...right?
Going forward, when creating the Backup, just select Boot & Data and I'm good to go? Or select all Except: System Image(only) & Vendor options (both)?
Also, just so I can understand a bit better, "System" is the actual OOS? Meaning, if I restore Boot & Data on any OOS, all my apps and data will be as I never left, or we should always restore on the OOS that was current at the moment of the Backup (which I have always done in the past).
PS. I may just do the backup again, just to make sure SYSTEM & VENDOR are not there for good measure!
Click to expand...
Click to collapse
First off, I already posted everything you need in my last comment and that's what I usually do. Everything should be there and not like you need to pay or reply to get the extra stuff that you may need. No point in replying asking for more as I'll just be repeating myself over and over.
Just choose boot & data for TWRP backups for OOS specifically going forward and after you got your device from repair. System, vendor doesn't work in my experience and will crash your system. Only backup the .img variant which was stated by the dev (Mauronofrio) for TWRP for OP6/6T devices. Only backup system.img and vendor.img if u need to backup system+vendor, but YOU don't have to for OOS and I said this previously.
JUST DO A BACKUP OF EVERYTHING OTHER THAN SYSTEM AND VENDOR. YOU SHOULD ONLY BACKUP SYSTEM.IMG AND VENDOR.IMG NEVER SYSTEM OR VENDOR.
They never work and will increase the size of your backup and will take even longer to transfer to your storage device from your phone.
YES, to your new question. You should update/ be on the same OOS version as your TWRP backup before u restore data + boot. Restore OOS via fastboot or msm and update to get to the same version of OOS as your TWRP backup. YOU should only do this if your phone is in the wrong version of OOS as your backup after you've got it back from REPAIR.
ALWAYS BE ON THE SAME VERSION OF OOS AS YOUR TWRP BACKUP BEFORE YOU RESTORE YOUR TWRP BACKUP OF OOS!
Maybe take a copy of your wifi passwords, take a google backup in settings, take a copy of sms/call logs and contacts. Other stuff that you may not have stored just in case the TWRP backup fails, but it shouldn't. Good luck
This should be it and there isn't anything else that you'll need

Extreme_Ninja2099 said:
First off, I already posted everything you need in my last comment and that's what I usually do. Everything should be there and not like you need to pay or reply to get the extra stuff that you may need. No point in replying asking for more as I'll just be repeating myself over and over.
Just choose boot & data for TWRP backups for OOS specifically going forward and after you got your device from repair. System, vendor doesn't work in my experience and will crash your system. Only backup the .img variant which was stated by the dev (Mauronofrio) for TWRP for OP6/6T devices. Only backup system.img and vendor.img if u need to backup system+vendor, but YOU don't have to for OOS and I said this previously.
JUST DO A BACKUP OF EVERYTHING OTHER THAN SYSTEM AND VENDOR. YOU SHOULD ONLY BACKUP SYSTEM.IMG AND VENDOR.IMG NEVER SYSTEM OR VENDOR.
They never work and will increase the size of your backup and will take even longer to transfer to your storage device from your phone.
YES, to your new question. You should update/ be on the same OOS version as your TWRP backup before u restore data + boot. Restore OOS via fastboot or msm and update to get to the same version of OOS as your TWRP backup. YOU should only do this if your phone is in the wrong version of OOS as your backup after you've got it back from REPAIR.
ALWAYS BE ON THE SAME VERSION OF OOS AS YOUR TWRP BACKUP BEFORE YOU RESTORE YOUR TWRP BACKUP OF OOS!
Maybe take a copy of your wifi passwords, take a google backup in settings, take a copy of sms/call logs and contacts. Other stuff that you may not have stored just in case the TWRP backup fails, but it shouldn't. Good luck
This should be it and there isn't anything else that you'll need
Click to expand...
Click to collapse
Thank you!!

Hey guys, for some reason I ended up on "Unmodified System Partitions", must have tapped the screen a few times in error while handling the phone I guess.
What should I do?
Unable to go back to TWRP main menu without selecting an option.
I am rooted, on stock OOS and not doing customs ROM at this time...
What should I do?
Select "Keep Read Only"? or Swipe to "Allow Modifications"?
thanking you guys in advance for you help & guidance!

plepew said:
Hey guys, for some reason I ended up on "Unmodified System Partitions", must have tapped the screen a few times in error while handling the phone I guess.
What should I do?
Unable to go back to TWRP main menu without selecting an option.
I am rooted, on stock OOS and not doing customs ROM at this time...
What should I do?
Select "Keep Read Only"? or Swipe to "Allow Modifications"?
View attachment 5320971
thanking you guys in advance for you help & guidance!
Click to expand...
Click to collapse
Swipe to allow modifications. But it seems that your internal storage corrupted. Not sure what you did and how you got into this situation.
After you swiped to allow modifications... If the internal storage files are a messed up, try to switch slots and reboot recovery

Extreme_Ninja2099 said:
Swipe to allow modifications. But it seems that your internal storage corrupted. Not sure what you did and how you got into this situation.
After you swiped to allow modifications... If the internal storage files are a messed up, try to switch slots and reboot recovery
Click to expand...
Click to collapse
I swiped and yeah, the IS was messed up in File Managfer(TWRP).
Selected Reboot then Selected the Slot I remembered I was on : "A"
Rebooted & Boom all good!
Thank you for the help once again! You rock!!

plepew said:
I swiped and yeah, the IS was messed up in File Managfer(TWRP).
Selected Reboot then Selected the Slot I remembered I was on : "A"
Rebooted & Boom all good!
Thank you for the help once again! You rock!!
Click to expand...
Click to collapse
Cool and at least that was a easy fix

Sorry, I'm a total noob, hopefully this is an easy question to answer. Is there any way that I can tell what version of OOS my TWRP Backup contains? I can't remember what version my phone was running when I did the TWRP backup and don't want to mess it up after I restore the phone from MSM. Thanks in advance for your help!

Sorry, I'm a total noob, hopefully this is an easy question to answer. Is there any way that I can tell what version of OOS my TWRP Backup contains? I can't remember what version my phone was running when I did the TWRP backup and don't want to mess it up after I restore the phone from MSM. Thanks in advance for your help!

jas84701 said:
Sorry, I'm a total noob, hopefully this is an easy question to answer. Is there any way that I can tell what version of OOS my TWRP Backup contains? I can't remember what version my phone was running when I did the TWRP backup and don't want to mess it up after I restore the phone from MSM. Thanks in advance for your help!
Click to expand...
Click to collapse
Well u posted this twice which isn't necessary and people will try and reply. But I'm not sure if there is a way to know and as long as u copied the whole TWRP folder for that backup, u should be fine restoring it with a newer version of TWRP. If it really matters to you, then maybe try and find the latest TWRP on the date you did the backup? I think just using a newer TWRP version should be fine

Should I use the same Gapps package I flashed during clean installing when updating custom rom?

Waynenolan92 said:
Should I use the same Gapps package I flashed during clean installing when updating custom rom?
Click to expand...
Click to collapse
U don't have to use the same gapps package. Using a updated one would be better. But, u only have to for ROMs that don't include gapps (vanilla builds) AND the Restore script doesn't show up during installation. Opengapps doesn't have that script but nikgapps does. Using dirty flash/updating a ROM should show the restore script and if it doesn't then just reboot to recovery and flash the updated or same gapps package. This can also be the same for updating the base/vendor (use method 3 in that section of the guide). I hope this helps

Extreme_Ninja2099 said:
U don't have to use the same gapps package. Using a updated one would be better. But, u only have to for ROMs that don't include gapps (vanilla builds) AND the Restore script doesn't show up during installation. Opengapps doesn't have that script but nikgapps does. Using dirty flash/updating a ROM should show the restore script and if it doesn't then just reboot to recovery and flash the updated or same gapps package. This can also be the same for updating the base/vendor (use method 3 in that section of the guide). I hope this help
Click to expand...
Click to collapse
Thanks for your replay)))it's my first using vanilla rom(without Gapps), so I flashed nikigapps Omni package, and my question is: should I always use the same package, or I can go with core package for example?

Waynenolan92 said:
Thanks for your replay)))it's my first using vanilla rom(without Gapps), so I flashed nikigapps Omni package, and my question is: should I always use the same package, or I can go with core package for example?
Click to expand...
Click to collapse
U can... But it doesn't really matter as a updated package works fine and u only need to use it if the nikgapps restore script doesn't show up when updating the ROM or vendor/base (OOS underneath)

I want to CHANGE custom ROMs (havoc to Lineage OS a11 to a12) I have taken TWRP back up of boot+data+system.img+ vendor.img. once I flash the new a12 Lineage plus Nikapps core plus magisk. What steps to restore data? any response is appreciated in advance. Thank you.