If anyone is interested in a Large Case to carry the Note 2 if you have a case on it such as Seidio ACTIVE with Metal Kickstand i got this one...
Samsung Galaxy Note 2 Note II Horizontal Leather Case with Magnetic closure with belt clip and belt loops (Plus Size will Fit w/ Otterbox Commuter on) + Cell Phone Antenna Booster
(link Belwo)
http://www.amazon.com/Samsung-Horizontal-Magnetic-Otterbox-Commuter/dp/B00AMOAW4S/ref=pd_cp_cps_2
When i got it a few weeks ago...it was $13.50 now it is $8 LOL. I have the Seidio ACTIVE with Metal Kickstand white
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSK3SSGT2K-GL
and it fits it almost 100% perfectly. There is a tiny bit of play (up/down....& side to side), but not much. It seems to fit better now that it has been broken in. And yes our phone is big so yes this is a big Horizontal Leather Case...but you get used to carrying it.
Although the pictures online make it look more like a grey leather, it is black. You can not see it in the pics online...but on the sides....a part of it has small strip of elastic. It "may" work for the extended case that comes with the 4500mAh extended battery. You could technically use this holster without a case on your Note 2...which i did for about 3 days before i got my case....but it will flop around a bit.
There are other reviewers on Amazon that say it fits with the Ottterbox Commuter and it is in the tile.
For those of you who want to mount it in the car...i suggest this. (see link below) i got the SM 678. and the legs are adjustable side to side. (I have wide for by the USB jack and close together for the top of the phone, so as not to cover the headphone jack.) And one side is movable with a fairly strong spring type mechanism to adjust for height... (which you can see in the videos...via Youtube...not my videos...).
Arkon -- car mounts -- Slim-Grip® Ultra™ Mounts for Smartphones & Tablets
http://arkon.com/Slim-Grip%20Ultra/index.html
some demo videos (Note 2 and S3 )
Note 2 Demo
http://www.youtube.com/watch?v=HnFQHEAt3Do
S32 Demo
http://www.youtube.com/watch?v=56aPWiHTCt4
I live i South Florida and i always buy from Arkon... for all my phones. But being in S. Fl. the heat is brutal... especially inside your car. I used to have windshield mounts and then bought a "friction dash mount"....and the heat would make the suction cups lose suction and it would fall. The last straw for me was when i was using the Nav on my Nexus 1 and it fell.
So I decided to glue it to the part where you suction cup it to the dash mount... using Gorilla glue. It worked like a charm. Since the parts are interchangeable on the Arkon products it was not a big deal going from a bigger mount for each larger phone (LG G2x was next). The reason why i am telling you this, is that this new version will stick to any part of a flat surface on your dashboard (yes of course glass too). If there is any "texture " on your dash should hold as long as it is a plain (mostly flat) or completely flat. You need to pick a 100% or perhaps 90% (as in "very slightly" curved) flat surface. I do not know what new tech they are using, but it is better than an ordinary suction cup. Some parts on the inside of the cup has a tiny techture / ridges to it, compared to a completely flat surface like your average suction cup. I am sure other company's have this tech too. I think it is modeled after the Geckos feet. You have to look really close at it to see it.
Anyway... it has yet to fall. We are heading into summer soon...so we will see how it holds up. We have not hit the high 90's yet or at least i do not think so) If it craps out on me later, i will try an remember to post.
--> EDIT( 04-27-2013) ok the heat got to it. When i would come out to my car it would be laying on the floor. If you remove it before you leave the car, most likely not an issue. But I do not want to reset the view etc every time. So back to the dash mount where i have a suction cup glued to it with Gorilla glue.
I hope this helps....
As the topic states, has anyone found a metal plate brand that has an adhesive that will actually stick to the rear of the 5T? I've tried a number of them, and they all pop right off when I go to pull the phone off the dash, leaving the plate attached to the magnets.
Specifically, I've tried the plate that came with:
"Maxboost" Magnetic Car Mount, which has no branding on the backer for the tape, so I'm not sure what it is
"DAFQCO" Magnetic Cell Phone Holder for Car, which used a 3M tape that i can't recall the number of off the top of my head
A Maxboost plate with it's tape replaced by 3M VHB Tape F9460PC tape.
I bought the Carbon fiber bumper case and attached the metal plate to the back of it with 3M double sided tape and leave it in my car.
Whenever I get in my car I just switch my case for the Carbon fiber bumper and have never had any troubles.
bp328i said:
I bought the Carbon fiber bumper case and attached the metal plate to the back of it with 3M double sided tape and leave it in my car.
Whenever I get in my car I just switch my case for the Carbon fiber bumper and have never had any troubles.
Click to expand...
Click to collapse
Where did you buy that carbon fiber bumper case? Can you provide a link?
Enviado do meu ONEPLUS A5010 através do Tapatalk
It's the official one from OnePlus.
https://oneplus.net/oneplus-5t-bumper-case
In this case, problem is about magnet is too strong, you can try using small metal plate or better adhesive.
Or put metal plate in between case and phone, magnet is strong enough to hold it (make sure to put protective film on plate or phone)
tonni3 said:
In this case, problem is about magnet is too strong, you can try using small metal plate or better adhesive.
Or put metal plate in between case and phone, magnet is strong enough to hold it (make sure to put protective film on plate or phone)
Click to expand...
Click to collapse
This is what I did. I used simple vinyl tape (electric tape) so the metal wouldn't scratch the phone
I bought the sandstone cover from the oneplus store.
In the future you might consider the proclip mount. I've had mine for 5 years and it's adjustable case has worked for every phone I've had since. I'm also anal about not having my AC air blowing on my phone in a vent mount. Probably a personal problem.
SoulkeepHL said:
As the topic states, has anyone found a metal plate brand that has an adhesive that will actually stick to the rear of the 5T? I've tried a number of them, and they all pop right off when I go to pull the phone off the dash, leaving the plate attached to the magnets.
Specifically, I've tried the plate that came with:
"Maxboost" Magnetic Car Mount, which has no branding on the backer for the tape, so I'm not sure what it is
"DAFQCO" Magnetic Cell Phone Holder for Car, which used a 3M tape that i can't recall the number of off the top of my head
A Maxboost plate with it's tape replaced by 3M VHB Tape F9460PC tape.
Click to expand...
Click to collapse
I ordered the spigen metal plate from Amazon. So far it hasn't come off. And I use it with the original thin case, the red case, and naked.
I use Tech Sense Lab Magback car mount. Wonderful product. I have the still plates attached to my phones case from inside. Works perfectly.
propagandax said:
In the future you might consider the proclip mount. I've had mine for 5 years and it's adjustable case has worked for every phone I've had since. I'm also anal about not having my AC air blowing on my phone in a vent mount. Probably a personal problem.
Click to expand...
Click to collapse
Thanks, I actually have the car half of a pro clip mount for my car, I love the quality and the ingenuity of the mount, I just don't love where it ends up placing it in a 7th gen VW GTI (right in the passengers knee if they're tall).
I ended up using the heavy duty exterior grade Scotch double sided foam tape (that's effectively 3M automotive trim tape) for a week before I ended up just building a car mount. And all this started because I'm one of the crazy people who doesn't use a case at all.
SoulkeepHL said:
Thanks, I actually have the car half of a pro clip mount for my car, i love the quality and the ingenuity of the mount, I just don't love where it ends up placing it in a 7th gen VW GTI (right in the passengers knee is they're tall).
I ended up using the heavy duty exterior grade scotch double sided foam tape (that's effectively 3M automotive trim tape) for a week before I ended up just building a car mount. And all this started because I'm one of the crazy people who doesn't use a case at all.
Click to expand...
Click to collapse
Cell helmet sounds like exactly what you're looking for. I've been using one for two years now on multiple phones and haven't had any issues: https://www.cellhelmet.com/pages/mounts
Hey everyone,
Im trying to get a metal plate to stick to the back of the phone to use with my magnetic car holder. i dont use cases and might get a skin.
Has anyone used a magnetic phone holder with the xperia xz2? and if so how did you get the metal plate to stick to the phone. i have tried three different ones now, speigen, and two no name brands. none work. phones to slippery.
posted in wrong area. sorry
Hey everyone,
Im trying to get a metal plate to stick to the back of the phone to use with my magnetic car holder. i dont use cases and might get a skin.
Has anyone used a magnetic phone holder with the xperia xz2? and if so how did you get the metal plate to stick to the phone. i have tried three different ones now, speigen, and two no name brands. none work. phones to slippery.
I'm searching for a magnetic phone holder which you can mount into the air vent of a car. Tried a few but the magnets are not strong enough to hold the phone.
Any advise, preferably based on experience.
Grab a thin metal plate adhesive from the one side, and stick it on the back of the phone or just place it inside a hard TPU case (between the case and the back of the phone), and it will be held like magic.
The plate must be large enough to hold it properly.
Some magnetic holders in the market include such metal plates.
I recommend Magnetic holder brand Baseus
It sticks very well even on rough road. Been using it for a month and never once it fall off.
Bought it for around $5
Premium build quality and also it comes with nice metal plate wrapped with leather.
Worth every cents.