KNOW WHAT YOU ARE DOING ! I AM NOT RESPONSIBLE OF BRICKING YOUR DEVICE.....
FOR OUR DEDICATED STOCK USERS
Made an new AROMA ROM based on the A2017G-N-B12 stock version. Like the other slim roms it’s just based on stock with some additions and option to debloat further. You can add the JOJOC Battery Tweak later on (as it gave me some troubles to implement on boot) that focuses on improved battery performance. I
It’s fully functional and tested (not on battery SOT). Smooth, no bugs. Magisk/SuperSU fully running without issues.
Hope you’ll E N J O Y !!!
Based on :
A2017G N-B12 STOCK ROM
INSTALL : ( TWRP )
When you're on another ROM, stock (or even on B05-slim,B06-slim² or B08…) and you want a clean install just follow this procedure :
Other models like A2017 and A2017U can flash this too. Only use Universal BL & your specific MODEM ! : https://androidfilehost.com/?w=files&flid=148464
IMPORTANT !!! When coming from a (treble) rom or Oreo rom beware you'll loose your data because you have to revert back to Nougat by wiping/format. When you're on STOCK rom and twrp3210 (or latest) move on to 'FLASH'
For now I'm using the 'old' school method (not yet the Labs Mod).
So follow this to prepare on 'FLASH' :
1. Boot into your twrp (let's say you're on twrp3218treble)
1a. Wipe system/vendor/data/cache/dalvik
2. Flash official twrp3.2.1.0 (or latest) and reboot into recovery AGAIN (not into system !)
3. You will see you have to “cancel” and swype and you’ll have to format again
4. Wipe : /advanced/wipe/choose data/change filesystem to EXT4
5. Then go into wipe : wipe system/data/cache/dalvik to be sure
6. continue with 3a below and so on....
FLASH :
0. In case you want to reflash your own apps, backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3a For G version flash : A2017G-N-B12-bootstack : https://androidfilehost.com/?fid=1322778262903993157
3b For U and CN version flash Universal BL+your MODEM : https://androidfilehost.com/?w=files&flid=148464 ! Don't forget to flash twrp 3.2.1.0 afterwards !
4. Install : AROMA A2017X SL!M➅ DF!NR : https://androidfilehost.com/?fid=1322778262904005937
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…
6. Done ! No more no less
AFTER INSTALL :
0. Use Jojoc Tweak for best battery result :
A2017X_JojocV2_SuperSU : flash in twrp
A2017X_Jojoc_magiskmodule_v2.1: flash in MagiskManager
A2017X_Jojoc_magiskmodule_v3.2: flash in MagiskManager
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. Go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
3. Check with f.e. Kernel Adiutor, when you added JoJoc Tweak, if it’s running ok and see if values are matching like here : https://forum.xda-developers.com/showpost.php?p=75431784&postcount=2
4. If choosen Magisk leave it as Magisk 16.7 (other ones bootloop as known)
INFO :
Stripped off :
Accuweather
Browser (ume)
Chrome
Email
Maps
Touchpal (+languages)
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
ZTE File mananger replaced by ES ( you can replace it in aroma )
….......
Baked into :
AdAway
Google Calender (you can remove this later if you want)
Google Clock (you can remove this later if you want)
Youtube Black themed addfree
Minor Modifications :
Boot :
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
AROMA Features to choose from :
• Debloat most remaining apps
• Choose SuperSU or Magisk
• Add Google Dialer
• Add Google Keyboard
• Center Clock
• ......
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@kenet (for his centerclock script i recompiled – Thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : 7.1.1 Nougat MiFavor 4.2
Source : ZTE stock-rom A2017GV1.2.0B12 / original ZTE upload/reuploaded : https://dl1.ztems.com/zxmdmp/downlo...K/ZTE/ZTE A2017G/452783/fota_B15_MR_B17_MR.up
Kernel : stock
Version Information :
Status : Stable
Created : 2018.09.15
Uploaded : 2018.09.15
Android Security Patch Level : 2018.07.01
-----
thx.
I heard chinese nougat released update also,can we get a build from that?
Thanks for this build.
Thank you!
I am currently on B10 slim, do you think I can dirty flash it over?
romitkin said:
Thank you!
I am currently on B10 slim, do you think I can dirty flash it over?
Click to expand...
Click to collapse
Preferable would be a clean flash though.
You can try but the aroma setup and endresult might differ although the initial aroma layout is quite the same.
The Jojoc module/zip has to be fashed afterwards now when you want to apply.
Do take a full twrp backup of your existing rom. You can always revert back
Many thanks for this! I decided to move over to LG V30 but want to put the Axon7 back to rooted stock & give to my wife.
hide bootloader msg zip problem
Since I'm planning on handing this over to my wife, who like things "simple" thought I would try your zip to hide the BL message at boot, flashed the zip , but it show ZTE boot screen twice, then goes right back into recovery. Any easy way to uninstall the zip, or do I need a complete do over?
thank you!
christoophat said:
Since I'm planning on handing this over to my wife, who like things "simple" thought I would try your zip to hide the BL message at boot, flashed the zip , but it show ZTE boot screen twice, then goes right back into recovery. Any easy way to uninstall the zip, or do I need a complete do over?
thank you!
Click to expand...
Click to collapse
Did you flash supersu or Magisk? Do that for starters again.
raystef66 said:
Did you flash supersu or Magisk? Do that for starters again.
Click to expand...
Click to collapse
Actually yes, before I flashed the BL zip I uninstalled Magisk using uninstall zip & reinstalled 17.1, then the BL zip.
Ended up starting over, realized during Aroma that I had uninstalled apps I wanted to keep! (lol better learn to read some day)
Still not sure why BL didn't work , as I'm on a A2017G like you.
Noticed that DTTO isn't working. Is that a setting somewhere or is it actually like that always? Been a while since on stock ROM...
Thanks for the rom. Will flash it the next days. <3
christoophat said:
Actually yes, before I flashed the BL zip I uninstalled Magisk using uninstall zip & reinstalled 17.1, then the BL zip.
Ended up starting over, realized during Aroma that I had uninstalled apps I wanted to keep! (lol better learn to read some day)
Still not sure why BL didn't work , as I'm on a A2017G like you.
Noticed that DTTO isn't working. Is that a setting somewhere or is it actually like that always? Been a while since on stock ROM...
Click to expand...
Click to collapse
"4. If choosen Magisk leave it as Magisk 16.7 (other ones bootloop as known)"
Hi !
Thx for this ROM. I was using B10 slim for a long time and decided to flash this over. So far I don't see much difference besides the
security level (which is good, B10 was a great ROM).
romitkin said:
Thank you!
I am currently on B10 slim, do you think I can dirty flash it over?
Click to expand...
Click to collapse
I dirty flashed B12 over B10, no issues so far.
regards
Hmm, I'm hitting the same snag on B12 that I did on B10 months ago. Trying to enter/use Personal Dictionary just won't work. Crashes settings. Been a long time so I forgot if a reason for that behavior is known.
LG G3 D851, PAC-MAN LP ROM, MultiROM, XDA Legacy
Hit another snag. Wanted to use Button Mapper which requires Accessibility. Any attempt at enabling Accessibility (for any app) causes the ROM to restart.
I'll grab logs later if needed.
Moto G5S Plus XT1806, Lluvia OS v1.4-NATURMADE, MultiROM, XDA Legacy
i saw this b12 mod on p4da https://4pda.ru/forum/index.php?showtopic=778560&st=2840#entry76984514
it has a 20band dolby atmos and magisk
Can someone grab the dolby file and put it on androidfilehost? i cant download files from that page.Only yandesk allows me
marcdw said:
Hmm, I'm hitting the same snag on B12 that I did on B10 months ago. Trying to enter/use Personal Dictionary just won't work. Crashes settings. Been a long time so I forgot if a reason for that behavior is known.
LG G3 D851, PAC-MAN LP ROM, MultiROM, XDA Legacy
Click to expand...
Click to collapse
marcdw said:
Hit another snag. Wanted to use Button Mapper which requires Accessibility. Any attempt at enabling Accessibility (for any app) causes the ROM to restart.
I'll grab logs later if needed.
Moto G5S Plus XT1806, Lluvia OS v1.4-NATURMADE, MultiROM, XDA Legacy
Click to expand...
Click to collapse
Hi Marc, can you flash this as a test to your PD.
As foor the ButtonMapper someone should test this (as I'm not on this one atm). Did the BM worked on G-B10 ?
What you also could do is flash the EDL G-B12 and see what happens related to the BM.
Predatorhaze said:
i saw this b12 mod on p4da https://4pda.ru/forum/index.php?showtopic=778560&st=2840#entry76984514
it has a 20band dolby atmos and magisk
Can someone grab the dolby file and put it on androidfilehost? i cant download files from that page.Only yandesk allows me
Click to expand...
Click to collapse
I take it it's one of the two files in the screenshot? I tried to get them but got 404 on the download page.
marcdw said:
I take it it's one of the two files in the screenshot? I tried to get them but got 404 on the download page.
Click to expand...
Click to collapse
i dont mean those 2.Follow the link i have posted (ZTE AXON 7 V1.2.0B12 DEODEX VERSION 2.0
Full firmware 7.1.1)
Updated the firmware V1.2.0B12
1. DEDEKS
2. It's completely cleaned from Google junk (you can install it from PlayMarket - it's the way it's left by the way)
3. Returned the stock El.Post + Weather widget ZTE
4. Implemented the Xperia keyboard
5. Installer was removed from the installer Magisk (put the knobs)
6. Stock DolbyAtmos + mixer
7. Introduced themes from the American version of B35
8. Removed signature verification of applications
9. Stock, net runoff
Addons
-20-band equalizer Dolby Atmos, in the sink 5 strips
i get same error when try to download.U need a account on p4da.I cant register cus of russian security check
Its a nougat dolby atmos with 20band equilizer like in dolby atmos oreo.
He also claims better battery life '' it will be better on autonomy, because there is no Guglokhma ''
What is Guglokhma? cant find anything much about it
raystef66 said:
Hi Marc, can you flash this as a test to your PD.
As foor the ButtonMapper someone should test this (as I'm not on this one atm). Did the BM worked on G-B10 ?
What you also could do is flash the EDL G-B12 and see what happens related to the BM.
Click to expand...
Click to collapse
Thanks. That zip worked perfectly. I can now go into and edit the dictionary. ?
Apologies for being unclear. No issue with Button Mapper. I'm unable to activate accessibility service for any app that may require it (BM, Greenify, etc).
First one selects the app and flip the on/off toggle at upper right. Confirmation dialog pops up detailing the services needed. When selecting OK the ROM soft reboots.
Could be a "just me" thing. ?
Can someone grab the dolby from this link? https://4pda.ru/forum/index.php?showtopic=778560&st=2840#entry76984514
Related
:good:Thanks to all for downloading (almost 400 ) my B06-slim² !:good:
As promised i made an AROMA ROM based on the B06-slim² version. For me it was more an exercise to complete this AROMA ROM for the G version.
As for the little spare time that i had i tried to make a version that has some features to add and to debloat further to scratch. It’s nothing too fancy but the first AROMA for our G model i think. I’ve enjoyed making it and perhaps i’ll make a new one if there’s enough feedback to add some more features in a next release :cyclops: !
It’s fully functional and tested. Smooth, no bugs (report when there is)
Hope you’ll E N J O Y !!!
Based on :
A2017G B06-slim² ROM
MiFavor 4.2
INSTALL : ( TWRP )
When you're on another ROM, stock (or even on B05-slim or B06-slim²) and you want a clean install just follow this procedure :
For other models, remove the first 2 lines (line1. "assert....". and line2. " abort....." in updater-script (in META-INF), save and rezip..
Or use this file : https://androidfilehost.com/?fid=962021903579490489 . Unzip it and drag the naked updater-script into the META-INF of the ROM with 7-zip and replace the existing one.
0. In case you want to reflash your own apps from B06-slim², backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3. Install : A2017G-N-B06-bootstack : https://androidfilehost.com/?fid=673368273298981646
4. Install : AROMA A2017G SL!M² DF!NR : https://androidfilehost.com/?fid=817906626617938421
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…or 2…
6. Done ! No more no less :cyclops:
AFTER INSTALL :
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. When you added Youtube Adfree, you’ll have to go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
INFO :
Stripped off : (like on B06-slim²)
Accuweather
Browser (ume)
Chrome
Email
Google Video, Films…
Maps
Touchpal (+languages)
Zte clock replaced by Google Clock
Zte calendar replaced by Google Calendar
ZTe File mananger replaced by ES File Explorer (imo a very good ROOT file manager)
….......
Baked into :
AdAway
ES
Google Calender
Google Clock
Minor Modifications :
Boot :
• Init.d enabled
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
AROMA Features to choose from :
• Debloat almost all remaining apps
• Choose SuperSU or Magisk (when installing modules aint working : just re-install Magisk in Manager and reboot)
• Add Google Dialer
• Add Google keyboard, Touchpal (activate in settings)
• Add Root Explorer Pro ( and remove ES )
• Center Clock
• Titanium Backup Pro
• Youtube Adfree Black Theme
• Extended Power Menu (normal white color)
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@Robbie P
@jeboo
@kenet (for his EPM and centerclock – Thnx !)
@benny3 (for his offered help and juice from BBTeam Rom for U-model)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
@franzyroy
@Robobob1221
@Ricky Divjakovski
ROM OS Version : 7.1.1 Nougat Mifavor 4.2
Source : ZTE stock-rom A2017GV1.2.0B06 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=817550096634795481
Kernel : stock
Version Information :
Status : Stable
Created : 2017-10-12
Any reason why this wouldn't work on the U version? I might give it a shot tomorrow.
pinkywinky said:
Any reason why this wouldn't work on the U version? I might give it a shot tomorrow.
Click to expand...
Click to collapse
You can flash Universal BL with U modem. See LOS14 Thread
https://androidfilehost.com/?w=files&flid=148464
Just give it a try. Should work too. First BACKUP !
Let me know
Which mifavor version? I assumed 4.2 since based from other.
Thanks!
Is the EPM Mod the colored or the normal version?
Maybe add xposed to additional features.
Spillunke said:
Thanks!
Is the EPM Mod the colored or the normal version?
Maybe add xposed to additional features.
Click to expand...
Click to collapse
Normal version. (i can add coloured version on a new version later on)
If there are enough requests I can make a new one with those additions either on this N-B06 or on a new N-B0X (if there ever comes a new one....)
raystef66 said:
Normal version. (i can add coloured version on a new version later on)
If there are enough requests I can make a new one with those additions either on this N-B06 or on a new N-B0X (if there ever comes a new one....)
Click to expand...
Click to collapse
No thanks, i like the white/normal version.
I hope there will be a new one. Android 8 would be awesome, but we will see... and again: thanks for your work!
raystef66 said:
You can flash Universal BL with U modem. See LOS14 Thread
https://androidfilehost.com/?w=files&flid=148464
Just give it a try. Should work too. First BACKUP !
Let me know
Click to expand...
Click to collapse
Ok I got it to work. however I kept getting "Erro:7" in TWRP. To fix I had to remove the first couple lines in the updater script file. Looks like the patcher wasn't recognizing my phone correctly.
All good though. Great ROM!
pinkywinky said:
Ok I got it to work. however I kept getting "Erro:7" in TWRP. To fix I had to remove the first couple lines in the updater script file. Looks like the patcher wasn't recognizing my phone correctly.
All good though. Great ROM!
Click to expand...
Click to collapse
Yeah, forgot to mention that. The first lines of updater-script has to be removed for other models to work. They're a safety check for G model.
So for other models, open Rom zip in 7zip. Go into META-INF to update-script, open with note++ and remove the 2 first lines ( line1 "assert..." and 2. "abort..."). Save and you're good to go :good:
Can someone please explain what the bootstack file is for? I have a A2017G stock rom. Do I need to use that? And do I flash it with twrp?
Hi
I came from RR and after restoring my apps and parameters from Google cloud, I have a problem with buttons on the notification panel. I can't organize buttons as I want maybe due to parameters from RR.
How can I solve that?
Could you check this app? It throws lots of warnings and I cannot use it. *on your rom ofcouse*
com.truelife.mobile.android.trueiservice
https://drive.google.com/file/d/0B9hMb-2Suv2TYW5DT1pUU0pPOEE/view?usp=drivesdk
I made a mistake, i have wiped system, data, internal storage, dalvik and cache for a clean install but now this ROM doesn't boot. I flashed bootsatck and ROM but doesn't boot. Lineage boot without problem.
What can i do?
fabro91 said:
I made a mistake, i have wiped system, data, internal storage, dalvik and cache for a clean install but now this ROM doesn't boot. I flashed bootsatck and ROM but doesn't boot. Lineage boot without problem.
What can i do?
Click to expand...
Click to collapse
check if system is choosed from mount section from twrp. if not select it
It seems i don't have boot partition. Lineage can work without this partition?
Just installed and it is fantastic. Thank you.
Only issue is the clock on the status bar is in the middle and sometimes is covered by other icons. Any solutions to this?
Sent from my ZTE A2017G using Tapatalk
Jeremy_Huang said:
Just installed and it is fantastic. Thank you.
Only issue is the clock on the status bar is in the middle and sometimes is covered by other icons. Any solutions to this?
Sent from my ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
Yes, in aroma installation set clock on the right side.
GP
Sent from my ZTE A2017G using XDA-Developers Legacy app
foggydew88 said:
Yes, in aroma installation set clock on the right side.
GP
Sent from my ZTE A2017G using XDA-Developers Legacy app
Click to expand...
Click to collapse
Can I just dirty flash it?
Sent from my ZTE A2017G using Tapatalk
Jeremy_Huang said:
Can I just dirty flash it?
Sent from my ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
Over itself? I think you can.
GP
Sent from my ZTE A2017G using XDA-Developers Legacy app
pinkywinky said:
Ok I got it to work. however I kept getting "Erro:7" in TWRP. To fix I had to remove the first couple lines in the updater script file. Looks like the patcher wasn't recognizing my phone correctly.
All good though. Great ROM!
Click to expand...
Click to collapse
hey buddy, i am installing it on 2017u, with lines removed but it isnt installing anything, just go into aroma and show installation but complete in just 2 seconds
and then say no os installed
please help
As promised i made an new AROMA ROM based on the A2017G-N-B08 version.
As for the little spare time that i had i tried to make a new version that has some features to add and to debloat further to scratch. It’s nothing too fancy but all right i think :cyclops:. I’ve enjoyed making it and will make new ones on new update-releases !
It’s fully functional and tested. Smooth, no bugs (report when there is)
Hope you’ll E N J O Y !!!
Based on :
A2017G N-B08-slim³ ROM (not released because of this ROM based on it )
MiFavor 4.2
INSTALL : ( TWRP )
When you're on another ROM, stock (or even on B05-slim,B06-slim² or B08) and you want a clean install just follow this procedure :
Other models like A2017 and A2017U can flash this too. Only use Universal BL & your specific MODEM ! : https://androidfilehost.com/?w=files&flid=148464
0. In case you want to reflash your own apps, backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3. Install : A2017G-N-B08-bootstack : https://androidfilehost.com/?fid=745849072291684863
4. Install : AROMA A2017(G) SL!M³ DF!NR : https://androidfilehost.com/?fid=817906626617945436
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…or 2…
6. Done ! No more no less
AFTER INSTALL :
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. When you added Youtube Adfree, you’ll have to go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
INFO :
Stripped off :
Accuweather
Browser (ume)
Chrome
Email
Google Video, Films…
Maps
Touchpal (+languages)
Zte clock replaced by Google Clock
Zte calendar replaced by Google Calendar
ZTe File mananger replaced by ES File Explorer
….......
Baked into :
AdAway
ES (you can change it later to RootExplorer)
Google Calender (you can remove this later if you want)
Google Clock (you can remove this later if you want)
Minor Modifications :
Boot :
• Init.d enabled
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
AROMA Features to choose from :
• Debloat almost all remaining apps
• Choose SuperSU or Magisk (when installing modules aint working : just re-install Magisk in Manager and reboot)
• Add Google Dialer
• Add Google Keyboard, Touchpal (activate in settings)
• Center Clock
• Youtube Adfree Black Theme
• Extended Power Menu (normal white color)
• .......
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@Robbie P
@jeboo
@kenet (for his EPM and centerclock – Thnx !)
@benny3 (for his offered help and juice from BBTeam Rom for U-model)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
@franzyroy
@Robobob1221
@Ricky Divjakovski
ROM OS Version : 7.1.1 Nougat Mifavor 4.2
Source : ZTE stock-rom A2017GV1.2.0B08 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=673791459329058532
Kernel : stock
Version Information :
Status : Stable
Created : 2017-11-10
Many thanks for this.
Is it possible/safe to dirty flash this over your B06 version?
EDIT: I'm already running your B06 version using the B08 bootstack/modem
Thanks a lot for your work and time! I always look forward to your ROMs. Have a great weekend!
Hi !
Thx a lot for you effort... really appreciated.
I dirty flashed over B06 (not AROMA), everthing running/starting fine so far.
(For deeper tests there was - of course - no time so far. Will keep you updated)
regards
joaste said:
Many thanks for this.
Is it possible/safe to dirty flash this over your B06 version?
EDIT: I'm already running your B06 version using the B08 bootstack/modem
Click to expand...
Click to collapse
Normaly you can joaste. I dont see any issue there :good:
Dont forget to backup. But you knew that already
raystef66 said:
Normaly you can joaste. I dont see any issue there :good:
Dont forget to backup. But you knew that already
Click to expand...
Click to collapse
Thanks ! Backup is already done:good:
Am downloading now while waiting for my flight at Brussels airport
Stupid question but why is this mifavor 4.2 whist the other stock based rom is 5?
What is the difference?
Dodgexander said:
Stupid question but why is this mifavor 4.2 whist the other stock based rom is 5?
What is the difference?
Click to expand...
Click to collapse
Mostly because I made this usable for the U model. Chinese one has MF5. They have to decide themselves
Is Titanium backup working in this release?
cioeneskens said:
Is Titanium backup working in this release?
Click to expand...
Click to collapse
Yes it is. I did a full test backup and restore and for me it's running ok :good:
Thanks. Works perfect.
Nice! I just installed the B06 last week and it really is great rom, thanks. I'm going to flash it tonight.
Is this Rom deodexed?
I was planning to remove some apps from system folder.
Gesendet von meinem ZTE A2017U mit Tapatalk
SilentEYE said:
Is this Rom deodexed?
I was planning to remove some apps from system folder.
Gesendet von meinem ZTE A2017U mit Tapatalk
Click to expand...
Click to collapse
No. It's not. I leave it odexed for known reasons : fluency , speed...
But removing system apps has no direct influence if you know what to remove. But I guess you know
I removed a bunch of system apps without deodexing.
It's only necessary when replacing apps (in some cases even that is not needed)
@raystef66
My problem is that I want to use microG.
Removing gapps lead to an unbootable device on the stock ROMs.
I never tried your creations.
Do I have to resign the zip file of the b08 if I edit delete the unwanted folders before flashing?
Gesendet von meinem ZTE A2017U mit Tapatalk
SilentEYE said:
@raystef66
My problem is that I want to use microG.
Removing gapps lead to an unbootable device on the stock ROMs.
I never tried your creations.
Do I have to resign the zip file of the b08 if I edit delete the unwanted folders before flashing?
Gesendet von meinem ZTE A2017U mit Tapatalk
Click to expand...
Click to collapse
If you want to remove or edit where possible you don't have to resign. Just drag folders you want to delete out of zip. When replacing apk's just drag them into it. Remember to verify if it's possible to remove /delete or replace.
You can always back up the original ones. If not working you always can revert back.
Or you deodex the rom partly when you know how.
I don't know your specific issue but I think it's doable.
Otherwise, PM me. Perhaps we can figure it out :good:
Anyways, replacing all gapps and inserting microG could be tricky. But harmless when not working
I could look into it tomorrow when you want or sent me the specific data you want to build in.
raystef66 said:
Mostly because I made this usable for the U model. Chinese one has MF5. They have to decide themselves
Click to expand...
Click to collapse
The other rom works with U model though. You just have to flash the universal bootstack/modem for U version. Only thing that doesn't work with that version is volte/cdma.
I am just confused. Seems like other rom is a mix of 4.2 and 5 though not only 5 and changing themes on adm rom currently causes a force close anyway so little use!
fellas, anyone that uses facebook messenger: are you getting signed out of fb (like once a day) if you try to reply by clicking on the notification? i've reinstalled and it still being dumb but i'm pretty sure its an issue with fb since its such a great app that never has issues......
Is it possible to completely remove the screen lock clearing battery saving feature? I'm using a custom ROM because I hate apps being force closed when I lock my screen, and you can't disable it for some apps (like live wallpapers).
Hey! Nobody uses whatapps here? I was happy to try this super b08 but unfortunately zte still has not corrected the problem of voice messages on whatapps so I go back to b04. Super good job otherwise this slim version with aroma ???
FOR OUR DEDICATED STOCK USERS :cyclops:
A bit later then sheduled but as promised i made an new AROMA ROM based on the A2017G-N-B09 stock version. Like the other slim roms it’s just based on stock with some additions and option to debloat further.
Futhermore i added the JOJOC Battery Tweak in options that focuses on improved battery performance. I first used it in my MiFavor5.0 rom and gave me and other users some pretty amazing SOT. So therefore i implemented it here too and it gave me an average of +7h SOT.
It’s fully functional and tested a lot. Smooth, no bugs. Magisk/SuperSU fully running without issues.
Hope you’ll E N J O Y !!!
Based on :
A2017G N-B09 STOCK ROM
INSTALL : ( TWRP )
When you're on another ROM, stock (or even on B05-slim,B06-slim² or B08…) and you want a clean install just follow this procedure :
Other models like A2017 and A2017U can flash this too. Only use Universal BL & your specific MODEM ! : https://androidfilehost.com/?w=files&flid=148464
0. In case you want to reflash your own apps, backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3a For G version flash : A2017G-N-B09-bootstack : https://androidfilehost.com/?fid=673791459329066133
3b For U and CN version flash Universal BL+your MODEM : https://androidfilehost.com/?w=files&flid=148464 ! Don't forget to flash twrp 3.1.1.0 or 3.2.1.0 afterwards !
4. Install : AROMA A2017(G/U/CN) SL!M➃ DF!NR : https://androidfilehost.com/?fid=818070582850486694
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…or 2…
6. Done ! No more no less
AFTER INSTALL :
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. Go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
3. Check with f.e. Kernel Adiutor, when you added JoJoc Tweak, if it’s running ok and see if values are matching like here : https://forum.xda-developers.com/showpost.php?p=74752134&postcount=39
3a. When on SuperSU, the JoJoc Tweak is enabled by default. So no worries.
3b. When on Magisk, just reboot into TWRP and flash the Magisk init.d enabler : https://androidfilehost.com/?fid=889964283620770880 and reboot. Check values whether tweak is running but it will
4. Enable/update google assistent if you want
….
INFO :
Stripped off :
Accuweather
Browser (ume)
Chrome
Email
Google Video, Films…
Maps
Touchpal (+languages)
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
ZTE File mananger replaced by ES ( you can replace it in aroma )
….......
Baked into :
AdAway
Google Calender (you can remove this later if you want)
Google Clock (you can remove this later if you want)
Youtube Black themed addfree
Google Assistent
Minor Modifications :
Boot :
• Init.d enabled
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
Added nav bar (can be disabled in settings)
AROMA Features to choose from :
• Debloat some remaining apps
• Choose SuperSU or Magisk (when installing modules aint working : just re-install Magisk in Manager and reboot)
• Add Google Dialer
• Add Google Keyboard, Touchpal (activate in settings)
• Center Clock
• JoJoc Battery Tweak
• ......
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@kenet (for his centerclock script i recompiled – Thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : 7.1.1 Nougat MiFavor 4.2
Source : ZTE stock-rom A2017GV1.2.0B09 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=673791459329072549
Kernel : stock
Version Information :
Status : Stable
Created : 2017-12-15
Uploaded : 2018-01-14
Android Security Patch Level : 2017-12-01
Thanks!
EDIT: Cant run this :/ after flashing it doesnt fully boot up. Stuck in bootanimation. Dont know where the problem is.
Wiped cache, dalvik and system, flashed the rom and rebooted.
Also tried to flash magisk 15.3 and xposed 89.1 after rom, because it was installed before, but no success.
2017G, stock bootloader
Spillunke said:
Thanks!
Click to expand...
Click to collapse
No problem :good: Better late then never
Added the battery saving tweak which should improve SOT. Also nav bar, google assistance, center clock, faster scaling 0.25. Hope you'll enjoy !
have a bootloop problem too...
A2017 all ok no bootlop twrp 3.2.1.0 universal bootloader b15
Spillunke said:
Thanks!
EDIT: Cant run this :/ after flashing it doesnt fully boot up. Stuck in bootanimation. Dont know where the problem is.
Wiped cache, dalvik and system, flashedthe rom and rebooted.
Also tried to flash magisk 15.3 and xposed 89.1 after rom, because it was installed before, but no success.
Click to expand...
Click to collapse
kraljan66 said:
have a bootloop problem too...
Click to expand...
Click to collapse
Strange, flash went flawless on my device, even after MiFavor 5.0 and so on. It's actually like the other slim roms i uploaded...
Perhaps other users can comment if flash was succesfull or not.
I don't see , except when the upload has an error, why it shouldn't boot properly.
As this rom is downloaded 50 times already , i think the problem should have been general but it isn't. .
EDIT : as @mario32 reported it boots ok.
So perhaps flash universal B15 + proper modem. Even try TWRP 3.2.1.0
But as said, it should boot properly. There's no special things added to this one as not to boot ok imo.
raystef66 said:
No problem :good: Better late then never
Added the battery saving tweak which should improve SOT. Also nav bar, google assistance, center clock, faster scaling 0.25. Hope you'll enjoy !
Click to expand...
Click to collapse
Wait, to install this on an U or CH you have to flash the B09 bootstack?
Maybe it'd be best to try flashing the Universal B32 bootstack on the U's (or at least the older B15). I don't know if it would work though
I'm assuming that it works on the chinese because of the report above
Choose an username... said:
Wait, to install this on an U or CH you have to flash the B09 bootstack?
Maybe it'd be best to try flashing the Universal B32 bootstack on the U's (or at least the older B15). I don't know if it would work though
I'm assuming that it works on the chinese because of the report above
Click to expand...
Click to collapse
It's in the thread itself.
For other models flash the Universal + modem
For G just the B09 bootstack
I just made the text a little bigger so you cant miss
I really don´t know where is problem with my AXON, your SLIM B13 booting without any problem, but this ...I tried univer B15, modem, your 09 bootstack....without change. After that tried again WIPE dalvik/cache...but still same...
raystef66 said:
It's in the thread itself.
For other models flash the Universal + modem
For G just the B09 bootstack
I just made the text a little bigger so you cant miss
Click to expand...
Click to collapse
not like it'd work, xda labs doesn't display text format besides bold and italic xd
It's OK I just didn't see it. Not like I don't have a G though.
Choose an username... said:
not like it'd work, xda labs doesn't display text format besides bold and italic xd
It's OK I just didn't see it. Not like I don't have a G though.
Click to expand...
Click to collapse
LOL, i thought your DFU unbrick guide and your other threads uses text formats too so....
Anyways, OP updated for the record:good:
Looking good man, thanks for providing to the community.
Now everything works fine except one thing - I can't end phonecalls
Hi @raystef66, thanks for this great upgrade. ROM is even smoother than before. I love it. No issues with installing it on my A2017 4/128, after I flashed universal BL&Ch-modem. Baseband upgrated, radio improved.
Two things to report after a half day of intensive use:
1. Settings FC, whenever I klick advanced settings/storage. Known issue or shall I log it.
2. I can't apply the jojoc tweaks. I tried it several times, no way. Any advice before I just do it digit by digit?
Choobilsky said:
Hi @raystef66, thanks for this great upgrade. ROM is even smoother than before. I love it. No issues with installing it on my A2017 4/128, after I flashed universal BL&Ch-modem. Baseband upgrated, radio improved.
Two things to report after a half day of intensive use:
1. Settings FC, whenever I klick advanced settings/storage. Known issue or shall I log it.
2. I can't apply the jojoc tweaks. I tried it several times, no way. Any advice before I just do it digit by digit?
Click to expand...
Click to collapse
THNX !
I'am running it now for a month and it's indeed smooth and good battery life.
Now to your issues :
1. i dont have had any issues when entering advanced/storage. Does it FC always ? Perhaps its because the G version is a 64GB and yours 128GB. Perhaps there's a mismatch ? @mario32 : you have a 128GB too ? Do you have FC on advanced settings / storage ?
2. You're running SuperSU or Magisk ? Either way, check if EXKernelmanager has permissions. On SuperSU all should work ok after reboot. On Magisk you'll have to enable it first via flashing my zip or with the init'd enabler in Magisk.
64gb version Yes FC advanced settings / storage
mario32 said:
64gb version Yes FC advanced settings / storage
Click to expand...
Click to collapse
Thnx for feedback. On my G version no fc.
You have a chinese version i suppose ?
Yes
lndiana said:
Now everything works fine except one thing - I can't end phonecalls
Click to expand...
Click to collapse
Which model please ?
mario32 said:
Yes
Click to expand...
Click to collapse
I think the storage fc occurs on chinese model only.
Btw, 120 downloads in less then a day
Perhaps other users can give comment on how it's running. Would appreciate that.Thnx !
... the G- model
FOR OUR DEDICATED STOCK USERS
IMPORTANT : do not remove MI-POP in debloat option within aroma. If you do, you'll not be able to take screenshots anymore with vol+power, neither with 3 finger-guesture ! thnx @xpakage for noticing
Note : user @sandibhatt had a problem with his extSD card ( "SD card is corrupted" ), hard to tell whether the problem was Magisk related but here is what he did (first backup extSD !) : TWRP -- Advanced wipe -- Repair or change file system -- Change SD card file system to FAT ( thnx @Srgqw )
Thought i made one based on the U-model latest B35.. Therefore this AROMA ROM based on the A2017U-N-B35 ( @DrakenFX thnx for the files :good stock version. Like the other slim roms it’s just based on stock (full Dolby, no call bugs....) with some additions and option to debloat further.
Futhermore i added the JOJOC Battery Tweak in options that focuses on improved battery performance. I first used it in my MiFavor5.0 rom and gave me and other users some pretty amazing SOT. So therefore i implemented it here too and it gave me an average of +7h SOT.
It’s fully functional and tested. Smooth, no bugs. Magisk/SuperSU fully running without issues.
Hope you’ll E N J O Y !!!
Based on :
A2017U N-B35 STOCK ROM (U-version)
INSTALL : ( TWRP )
When you're on another ROM, stock,... and you want a clean install just follow this procedure :
Other models like A2017 and A2017U can flash this too. When not booting with the B35 bootstack, you can always use the Universal BL !
0. In case you want to reflash your own apps, backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3a. Flash A2017Uv1.1.0B35_Bootstack_adapted : https://androidfilehost.com/?fid=962187416754458082
3.b. Always flash your proper modem after this bootstack ! :
*G-modem (B09) : https://androidfilehost.com/?fid=962021903579497257
*U-modem (B35) : https://androidfilehost.com/?fid=962187416754458084
*CN-modem : look here
3.!. When not booting correctly after complete procedure (4) just flash Universal BL adapted (included TWRP3.2.1.0) : https://androidfilehost.com/?fid=673956719939817093
Note : and your modem again
4. Install : AROMA A2017(G/U/CN) N-B35 SL!M¹ DF!NR : https://androidfilehost.com/?fid=890129502657580553
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…or 2…
6. Done ! No more no less
AFTER INSTALL :
0. setup your wifi/data...
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. Go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
3. Check with f.e. Kernel Adiutor, when you added JoJoc Tweak, if it’s running ok and see if values are matching like here : https://forum.xda-developers.com/showpost.php?p=74752134&postcount=39
3a. When on SuperSU, the JoJoc Tweak is enabled by default. So no worries.
3b. When on Magisk, just download init.d linker from modules and reboot. Check values whether tweak is running but it will
4. ONLY for G model bulletproof : if you want to remove the "unlocked BL screen", flash : https://androidfilehost.com/?fid=745849072291698596
On my G-version it went without problem. Do check out and read post first !!! Btw, boot-time is even a bit faster then on G
….
INFO :
Stripped off :
Accuweather
Browser (ume)
Chrome
Email
Google Video, Films…
Maps
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
….......
Baked into :
AdAway
Google Calender (you can remove this later if you want)
Google Clock (you can remove this later if you want)
Youtube Black themed addfree (latest)
...
Minor Modifications :
Boot :
• Init.d enabled
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
Center Clock
Added Screen Lock Now (from G version)
AROMA Features to choose from :
• Debloat some remaining apps
• Choose SuperSU or Magisk (when installing modules aint working : just re-install Magisk in Manager and reboot)
• Add Google Dialer
• Add Google Keyboard
• Center Clock
• JoJoc Battery Tweak
• ......
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@kenet (for his centerclock script i recompiled for B35 – Thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : 7.1.1 Nougat
Source : ZTE stock-rom A2017UV1.1.0B35 / original ZTE upload/reuploaded : https://www.dropbox.com/s/xy7nd252f3rcm5y/338450B3220A2017UV1.1.0B35(SD card software).zip?dl=0
Kernel : stock
Version Information :
Status : Stable
Created : 2018-01-31
Uploaded : 2018-02-03
Android Security Patch Level : 2017-12-01
...
Will you be making one for the test release of 8.0, seems like it needs your special touch. Thanks for your work mate.
Since I was on DrakenFX B35 ROM, B35 bootloader and TWRP3.2.1.0, I wiped both caches and the system, then flashed the modem (do not know if needed to) and dirty flashed this ROM. I did not flash the modded bootloader. So far no problems, which I do not expect to have any since this ROM is based off of DrakenFX B35.
I have the A2017U version phone.
Remember to set default apps if you use Google dialer, keyboard or any different app.
I do have a small delay like when using the fingerprint to unlock the phone?
luisaet82 said:
I do have a small delay like when using the fingerprint to unlock the phone?
Click to expand...
Click to collapse
Your phone may be in a deep sleep. Hit your power button to lock your phone and try it again. Unlock with your fingerprint reader. The unlock should be close to instant. The delay is a small price for great battery life
I reflash the whole thing and now it's working great ...
So far it's great
Hey does anybody have the zte stock apps package please. I love this rom but I would like some of the original stock apps back like weather clock and calendar ect...
Thank you
@raystef66 - Thanks for the great work as usual!
Is they any benefit to this over the B09 G based version?
Hello Friend. I have a problem with Kernel Adiutor. It does not open to me. He says that I do not have root rights. Magisk does not give you permission. How can I solve that?
Thank you. Otherwise the rom goes perfect
joaste said:
@raystef66 - Thanks for the great work as usual!
Is they any benefit to this over the B09 G based version?
Click to expand...
Click to collapse
Thnx @joaste. Much appreciated :good:
Don't know if there are some benefits against b09. Not really imo. Not sure about battery life. Haven't had the time to test that out. Perhaps you can give it a try. The app buttons layout are a bit different as to b09. The app drawer is a bonus. Volte is available in settings. I didn't have this in b09. It's a smaller rom in gb to flash for sure. The standard keyboard is touchpal. Imo a bit better then the standard build-in keyboard to begin with at start. No call issues. Clear sound, imo louder then b09. So in general about the same as ours i think but with some small differences. Perhaps you try this one and compare battery life to b09. I know from the past that you're looking for a somewhat better battery life
totmakina said:
Hello Friend. I have a problem with Kernel Adiutor. It does not open to me. He says that I do not have root rights. Magisk does not give you permission. How can I solve that?
Thank you. Otherwise the rom goes perfect
Click to expand...
Click to collapse
Thnx! Go into magisk and uncheck KA. Go into KA again and it should ask for permissions.
no more languages to choose this rom
mario32 said:
no more languages to choose this rom
Click to expand...
Click to collapse
What do you mean ? When booted for the first time it should ask you your native language...
Even then you can change it later on in developer options/language input.
The pics in OP are in "dutch" , so i could choose....
Just installed without problems, very good job once again.
Bravo.
Sent from my [device_name] using XDA-Developers Legacy app
foggydew88 said:
Just installed without problems, very good job once again.
Bravo.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Thnx ! :good:
Btw, could you login (like i did with dutch language) with italian i presume ? And , can you afterwards change language under developer options/language input ?
raystef66 said:
Thnx ! :good:
Btw, could you login (like i did with dutch language) with italian i presume ? And , can you afterwards change language under developer options/language input ?
Click to expand...
Click to collapse
I've made it along the starting configuration, Italian language has been shown as default.
Sent from my [device_name] using XDA-Developers Legacy app
foggydew88 said:
I've made it along the starting configuration, Italian language has been shown as default.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Thnx for your feedback ! That's what i thought. All cleared then
raystef66 said:
What do you mean ? When booted for the first time it should ask you your native language...
Even then you can change it later on in developer options/language input.
The pics in OP are in "dutch" , so i could choose....
Click to expand...
Click to collapse
after installation, there is no Polish language to choose from only spanish english and china no polish menu language
mario32 said:
after installation, there is no Polish language to choose from only spanish english and china
Click to expand...
Click to collapse
Don't now why. As you can read above, other users can choose.
Perhaps do the procedure all over again and choose your language at startup.
EDIT : did you flash a chinese rom lately ? Perhaps, that might mess up your standards by default...
FOR OUR DEDICATED STOCK USERS :good:
Made an new AROMA ROM based on the A2017G-N-B10 stock version. Like the other slim roms it’s just based on stock with some additions and option to debloat further.
I added the JOJOC Battery Tweak in options that focuses on improved battery performance. I first used it in my MiFavor5.0 rom and gave me and other users some pretty amazing SOT. So therefore i implemented it here too and it gave me an average of +7h SOT.
It’s fully functional and tested. Smooth, no bugs. Magisk/SuperSU fully running without issues.
Hope you’ll E N J O Y !!!
Based on :
A2017G N-B10 STOCK ROM
INSTALL : ( TWRP )
When you're on another ROM, stock (or even on B05-slim,B06-slim² or B08…) and you want a clean install just follow this procedure :
Other models like A2017 and A2017U can flash this too. Only use Universal BL & your specific MODEM ! : https://androidfilehost.com/?w=files&flid=148464
0. In case you want to reflash your own apps, backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3a For G version flash : A2017G-N-B10-bootstack : https://androidfilehost.com/?fid=890129502657589611
3b For U and CN version flash Universal BL+your MODEM : https://androidfilehost.com/?w=files&flid=148464 ! Don't forget to flash twrp 3.1.1.0 or 3.2.1.0 afterwards !
4. Install : AROMA A2017(G/U/CN) SL!M➄ DF!NR : https://androidfilehost.com/?fid=818070582850499299
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…or 2…
6. Done ! No more no less
AFTER INSTALL :
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. Go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
3. Check with f.e. Kernel Adiutor, when you added JoJoc Tweak, if it’s running ok and see if values are matching like here : https://forum.xda-developers.com/showpost.php?p=75431784&postcount=2
3a. When on SuperSU, the JoJoc Tweak is enabled by default. So no worries.
3b. When on Magisk, just reboot into TWRP and flash the JoJoc Magisk Module : https://forum.xda-developers.com/showpost.php?p=75631796&postcount=169 and reboot. Or flash it within Magisk/add new module and search for your downloaded module on intSD/extSD. Check values whether tweak is running but it will.
4. ...
INFO :
Stripped off :
Accuweather
Browser (ume)
Chrome
Email
Maps
Touchpal (+languages)
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
ZTE File mananger replaced by ES ( you can replace it in aroma )
….......
Baked into :
AdAway
Google Calender (you can remove this later if you want)
Google Clock (you can remove this later if you want)
Youtube Black themed addfree
Minor Modifications :
Boot :
• Init.d enabled
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
AROMA Features to choose from :
• Debloat most remaining apps
• Choose SuperSU or Magisk
• Add Google Dialer
• Add Google Keyboard
• Center Clock
• JoJoc Battery Tweak
• ......
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
@SuperR.
@Ayush Singh
@nfsmw_gr (for our work together on his JoJoc tweak , thnx !)
@kenet (for his centerclock script i recompiled – Thnx !)
@ZaneZam (iYTB Thnx !)
@Chainfire
@topjohnwu
@jcadduono
ROM OS Version : 7.1.1 Nougat MiFavor 4.2
Source : ZTE stock-rom A2017GV1.2.0B10 / original ZTE upload/reuploaded : https://androidfilehost.com/?fid=746010030569960734
Kernel : stock
Version Information :
Status : Stable
Created : 2018-03-08
Uploaded : 2018-03-10
Android Security Patch Level : 2018-01-05
....
raystef66 said:
....
Click to expand...
Click to collapse
Good work!!!
Dear raystef66! Could you build this A2017G B10 firmware with MiFavor 5.0 UI and add the M8 weatherwriter with MIUI8 to the Accuweather site. And do not delete application data:
Chrome
Email address
Maps
Touchpal (+ languages)
ZTE clock
ZTE calendar
ZTE File mananger.
It is possible to make a choice in Aroma install, ZTE application or Google.
[ROM][AROMA][A2017G/U/CN][B10 7.1.1.][stock] SL!M➄ DF!NR by raystef66
Flashed this new rom and works like magic. I chose Supersu, cause it was either that or Magisk. Since I am used to Supersu I decided to stick with it. TB likes it too.
Many thanks for your work.
Hello, I have a problem my download of the rom systematically stops at 96% how to do? Thank you
GAO161 said:
Hello, I have a problem my download of the rom systematically stops at 96% how to do? Thank you
Click to expand...
Click to collapse
Me tooo 96% ?
GAO161 said:
Hello, I have a problem my download of the rom systematically stops at 96% how to do? Thank you
Click to expand...
Click to collapse
mario32 said:
Me tooo 96%
Click to expand...
Click to collapse
Better check your connection ....
100% within 5 min
Can someone please test the Android personal dictionary with this rom? Slim4 is hands down my favorite rom for my A2017U. I'm wondering if it is worth the upgrade.
i installed, coming from darkrom 14.1 my phone will not connect to cell network. it keeps disabling and stating my phone is in airplane mode when i call. i have a a2017u
"Could not remount /system". reboot disemmcwp doesnt work.
I'm using magisk and try to convert apps to system apps with "/system/app mover"
Also strange problem: apps asking for root after a reboot.
Some suggestions or so?
I had the same problem.
It's only working with superSU.
If SuperSu is a sure thing, i think i will switch to SU and maybe switch back to magisk, if i cant find similar xposed modules or apps which i'm using with magisk.
In my case it's working without problems.
Xposed v89 is installed and the phone is encrypted.
Gruß in die Hauptstadt.
Magisk 15.3 + Magisk Manager 5.5.5 = root settings for apps survived a reboot
Magisk 15.3 / 16.0 + Magisk Manager 5.6.x = settings dont survived a reboot
I'm not sure whats happening, If i update magisk manager now.
strange, but magisk 15.3/5.5.5 is fine for me.
Grüße zurück ;D
EDIT: tried SU 2.82 but still "Could not remount /system". Sucks -.-
I can confirm troubles with downloads, 96% an each server on afh...
try some download manager I had the same problem and downloaded this file
Spillunke said:
Magisk 15.3 + Magisk Manager 5.5.5 = root settings for apps survived a reboot
Magisk 15.3 / 16.0 + Magisk Manager 5.6.x = settings dont survived a reboot
Click to expand...
Click to collapse
Grüsse :highfive: - here too the case is the missing logd. magisk and magiskhide need this from version 15.4 on to work propper. Correct me if i'm wrong This issue is not based on @raystef66 's great work here (thanks a lot!) but a ZTE issue.
hi, i can't enter in recovery. After tux led blinks orange a couple of time then nothing happens. i'm using twrp nfound latest.
digiNZM said:
Grüsse :highfive: - here too the case is the missing logd. magisk and magiskhide need this from version 15.4 on to work propper. Correct me if i'm wrong This issue is not based on @raystef66 's great work here (thanks a lot!) but a ZTE issue.
Click to expand...
Click to collapse
Ah okay. So i need to update step by step? 15.3 -> 15.4 -> 16.0?
I mean that problem still exists with 15.3 and Manager v5.6.3.