Please Help. Phone isn't bricked but not functional. - LeEco Le 2 Questions & Answers

Hello everyone,
Device: Leeco LE2 Snap Dragon Version
Today I did a big mistake.
I installed original stock ROM EUI Version: 5.9.026S
But that ROM is not functional. At the time of first set up, I am unable to go forward after accepting Leeco terms & condition because Leeco server is not working. Strange thing is that there is no option to Skip setup.
But TWRP recovery is replaced with stock recovery. I can't do anything from stock recovery.
I tried to unlock the bootloader. But it didn't work because OEM UNLOCK is not enabled from settings.
Tried to fix hard brick using Flash tool, it's not working either because the phone is not hard bricked.
Now I am stuck, don't know how to solve.
Please help!!
Thanks in advance.

Try this
https://forum.xda-developers.com/le-2/how-to/guide-unbrick-unlock-leeco-le-2-x52x-t3831116
tanaymondal said:
Hello everyone,
Device: Leeco LE2 Snap Dragon Version
Today I did a big mistake.
I installed original stock ROM EUI Version: 5.9.026S
But that ROM is not functional. At the time of first set up, I am unable to go forward after accepting Leeco terms & condition because Leeco server is not working. Strange thing is that there is no option to Skip setup.
But TWRP recovery is replaced with stock recovery. I can't do anything from stock recovery.
I tried to unlock the bootloader. But it didn't work because OEM UNLOCK is not enabled from settings.
Tried to fix hard brick using Flash tool, it's not working either because the phone is not hard bricked.
Now I am stuck, don't know how to solve.
Please help!!
Thanks in advance.
Click to expand...
Click to collapse

dgarcia said:
Try this
https://forum.xda-developers.com/le-2/how-to/guide-unbrick-unlock-leeco-le-2-x52x-t3831116
Click to expand...
Click to collapse
Thanks a lot. You saved me.

Related

Mi5 bricked ... no LED / no Recovery / no Fastboot / no signs of Life !!!

Hi friends, since today my phone is bricked.
I cant get into recovery/fastboot mode. No LED even when i connect it to charging.
My phone gets detected on MiFlash and i have successfully flashed the developer ROM but even then my Phone refuses to boot. What could be the problem ? i tried almost all the Guides on Internet. i dont know what happened. I had ResurrectionRemix 7.1.1. till yesterday working without any problem. Today all of a sudden i am facing this issue. i wanted to flash Brand Kernel but i just downloaded and didnt flash it. after that this horrible experience of HardBrick.
Anyone help me pls what can be done / i am on Windows 7 64bit and i tried on only one laptop. As i said earlier, i have no problem in flashing latest global developer ROM(Fastboot ROM) using MiFlash. but it doesnt reboot, no LED, no Recovery no Fastboot. i am quite irritated with this. such an issue i never had with any other Android phone(HTC Desire, Samsung galaxy SII, Xiaomi Mi2S), but now with Mi5...
Am i Unlucky ? have i turned my new Mi5 into a costly Paperweight ? i bought it on geekbuying during special Offer... just an info...
I am waiting for an helping hand... pls help me friends....
Try test point method, it's revived my hardbrick mi5.
Just google the tutorial. It's quite easy.
But it's void the warranty because of the broken seal
What is that ? I couldn't figure it and I couldn't find it on Google. Can u give a simple guide or a link to it pls ? Thanks in advance
[https://m.youtube.com/watch?v=ED96PJ-qYMM] [Unbrick Xiaomi Mi5 - Repair Boot Xiaomi Mi5 hardbrick PC not detected ! | ChoiMobile.VN - YouTube]
Check it out { Lock bootloader Method }
http://en.miui.com/thread-299790-1-1.html
Avoid stupid test point stuff. All you need to do is disconect the battery and reconnect it back again.
Read this
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Same problem..and solved
Hi I don't understand which method to follow... is global Rom 7.2.4 stable or dev Rom?
Also miflash is latest stable or beta ?
I am waiting
Spevky said:
Avoid stupid test point stuff. All you need to do is disconect the battery and reconnect it back again.
Click to expand...
Click to collapse
how do i do it ? pls explain to me in detail. Thanks in advance
plikmuny said:
how do i do it ? pls explain to me in detail. Thanks in advance
Click to expand...
Click to collapse
Just watch a tutorial on how to dissasemble the mi5

[Help] How to manually delete fingerprints from the phone

Hi guys,
about a week ago my rooted P9 with Lineage 14.1 crashed and was stuck in the boot screen for hours. I waited until it completely discharged and tried rebooting again but that didn't help either. The only way I could resolve this was to boot to recovery (TWRP) via fastboot and do a factory reset. After that it worked just fine except for setting up fingerprints.
In the settings menu there were no fingerprints set up and I couldn't register fingerprints from the fingers I previously had registered, but I could add a fingerprint I haven't used before. After that, however, all the old fingerprints still worked to unlock the phone even if they don't show up in the settings menu.
Do you know where these old fingerprints are stored and how to delete them manually?
Thanks for the help!
Suggesting to report custom ROM issues under the corresponding custom ROM threads - higher chance that somebody who is familiar with the particular custom ROM can spot and help
zgfg said:
Suggesting to report custom ROM issues under the corresponding custom ROM threads - higher chance that somebody who is familiar with the particular custom ROM can spot and help
Click to expand...
Click to collapse
Thanks, I'll try that.

Help bootloop

hello guys, ive just made a big mistake by messing with this,ive tried to unlock bootloader,and to root my phone with mi a2 toolkit v1.0.6 ,i managed to unlock bootloader ,but at second step to root ,phone got in bootloop,now i cant do nothing with it,any help ?
ixyco96 said:
hello guys, ive just made a big mistake by messing with this,ive tried to unlock bootloader,and to root my phone with mi a2 toolkit v1.0.6 ,i managed to unlock bootloader ,but at second step to root ,phone got in bootloop,now i cant do nothing with it,any help ?
Click to expand...
Click to collapse
Do you wanna have stock installed?
Then you could just flash that with mi flash.
All data on the phone will get lost though.
Do you need anything badly that's on your phone at the moment?
In case you rather wanna try out a custom ROM (which I would so much advise in this case where you need to reflash stuff anyway) the steps are different. So write back if you need hints how to get there.
thanks for the answer. ive alredy solved problem with instaling miui 11 whats been mainly reason what i was doing. i had some troubles with cmd
command to run twrp. if anyone get faced with this issue .. contact me
thank you again. Rom is awsome ???

Samsung Galaxy A6 touch screen not working after update

Hello, guys! After installing the latest update on my Galaxy A6 (A600FN) the touch screen stopped working. I tried flashing all 3 ROMs for my region that had the version 5 bootloader with Odin and none of them fixed the issue. One of them was Android 10 and 2 were Android 9. ROMs with an older version of the bootloader would fail the flash because apparently you can't downgrade it. It shows this error: Sw rev. Check fail. Device: 5, binary 3. I'm certain it's not a hardware issue because I had this happen on 2 A6 devices right after the update. I thought of trying a custom ROM but I can't find one for A6, only A6+. What can I do here? Can I trick it somehow to downgrade it? Is there some command I can send through adb shell to fix the touchscreen? Any help would be greatly appreciated!
BTW, I can access the device via a USB OTG mouse and it works perfectly fine.
Bump. Please, any help is appreciated!
Do you tried factory reset from recovery?
Zevnor said:
Do you tried factory reset from recovery?
Click to expand...
Click to collapse
That was the first thing I tried. Didn't help.
robert335 said:
That was the first thing I tried. Didn't help.
Click to expand...
Click to collapse
Is your phone carrier-branded? If yes, try to flash unbranded firmware.
I managed to fix it, will update this post soon with how I did it.
robert335 said:
I managed to fix it, will update this post soon with how I did it.
Click to expand...
Click to collapse
HI, if you have a solution to this problem can you share it please? I have the same phone with the same issue .
barthab said:
HI, if you have a solution to this problem can you share it please? I have the same phone with the same issue .
Click to expand...
Click to collapse
First make sure you aren't RMM locked: https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Then get yourself TWRP: https://forum.xda-developers.com/galaxy-a6/development/recovery-twrp-3-2-2-0-galaxy-a6-t3819741
Afterwards, I installed this custom ROM which is pretty close to stock Pie: https://forum.xda-developers.com/galaxy-a6/development/rom-pa6-rom-a6-t3943573
Maybe you can try this one too, I haven't tried it: https://forum.xda-developers.com/galaxy-a6/development/phonezippy-microrom-t4083579
After installing the ROM, make sure to install "no-verity-opt-encrypt" and "RMM Bypass v3". This is VERY IMPORTANT, otherwise your device will become RMM locked and brick itself until you flash stock firmware again.
I fixed both of my phones but looks like I messed up on one and after I restarted it had RMM state Prenormal. Does anyone know how to fix this? OEM is unlocked in developer settings but flashing twrp from Odin yields "only official binaries are allowed"...

Phone without OS, bricked

Hi everyone, I tried looking all over the internet for my problem and can't see to find any solution.
The thing is, and I'm going to explain from the beginning. Several month's ago I upgraded mi p9 from android 7 to android 8 via the guide that's here on XDA, everything worked out just fine. But a couple of weeks ago I was gonna restore my phone to stock, so that that I can use it as "new" as my second phone because I bought another one. The thing is, that I think I make a factory reset the wrong way, because I did it from TWRP instead in the options menu. And since then the phone just won't work. I tried flashing tru TWRP LineaneOS but it just get bootloop in the animation and then restart. I tried installing stock Oreo and stock Nougat via the dload process and it just give me error's or it doesn't even pass 5% installation and then gives errors. I tried flashing rom via fastboot mode with Hwota, ADBToolkit, and others method that I found and nothing, anything seens to work. And I really want to restore the phone so that I can use as my second phone (for work).
If anybody can help I would gladly appreciated. If I can have stock Oreo again that's fine, if I can have another rom with Oreo that would be nice too, and if the only option is to have stock nougat again, that wouldn't be a problem either. I just want my phone back xD
Thanks!
Try to restore your Phone from Erecovery
try flashing B550 from HuRUpdater on TWRP
Wattsensi said:
try flashing B550 from HuRUpdater on TWRP
Click to expand...
Click to collapse
My friend you're a life saver, I didn't find that B550 you said, but I flash B520 i think, and at first I tought it didn't work because it got stuck on huawei logo, after some time, and after doing something on erecovery that I don't know what I did because it was in chinese, the phone finally boot just fine.
So once again, thanks!
sebasmadd said:
My friend you're a life saver, I didn't find that B550 you said, but I flash B520 i think, and at first I tought it didn't work because it got stuck on huawei logo, after some time, and after doing something on erecovery that I don't know what I did because it was in chinese, the phone finally boot just fine.
So once again, thanks!
Click to expand...
Click to collapse
B552 came out with Oct 2020 vendor security patch, enjoy
https://pro-teammt.ru/en/online-firmware-database-ru/?firmware_model=EVA-&firmware_page=0

Categories

Resources