Related
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Can you boot into bootloader ?
You may change your recovery to the origine one then flash a new ROM
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
What's the status of your phone?
If you can acces fastboot mode it's ok
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
If you can enter fastboot mode and download official ROM pack, then you are all good.
Method:
http://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
kamrangul87 said:
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
Click to expand...
Click to collapse
Fastboot method most probably is your only choice now.
Follow this method here:
https://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Reboot to recovery wit volume up + power button trigger . and then click on reboot button and then select reboot to bootloader. Their you flash system.img , boot.img and cust.img to their partitions. And then reboot . if u understand what I said I will help u further .
A little bit of help needed...
Hi,
I basically did the same mistake as the other guys, unlocked the bootloader and installed twrp, all fine. Then I ***** up by trying to root fellowing a tuto made for the non-Che2-L11 ones.
I have no problem going into TWRP, the bootloader, or the black screen from huawei (witch looks like.. some kind of second recovery ?)
I managed to download the stock software from huawei ( Honor 4X Firmware (Che2-L11, Android5.1.1, EMUI3.1, C636B360, Malaysia)S.zip ) and also managed to download a version of HuaweiUpdateExtractor ( 0.9.9.5 ).
My problem now, is that if I understood correctly, I should extract the image files from the APP from the firmware zip I downloaded from Huawei.
Unfortunatly, there is no HuaweiUpdateExtractor profile for the honor 4x Che2-L11.
There I may need assistance, or guidance.
Does the profile already exists somewhere ?
How can I create my own, is it not too complex ?
Maybe someone already extracted thoses files and could make them available somewhere ?
Or maybe is there any other way to unbrick my phone ?
************************************
EDIT: Nevermind. I managed to extract the files without profiles. I flashed them 3 but nothing really changed.. So.. I'm kinda stuck. no Idea from here.
************************************
************************************
EDIT (of the edit) : Nevermind the previous nevermind ! It actually worked ! Well, kinda.. Seems my new "stock rom" is quite buggy, strangly, but nevertheless, it work Thanks
************************************
Thanks a lot.
Hello
Hello friend, i also have the same problem. My huawei honor 4x che2-l11 stuck on huawei logo i can not unbrick it. if you succsed so plz attach the file you extract to my email plzzzzz.
email: [email protected]
Thanks.
Hi,
I've been looking for instructions and stuff for rooting my phone Honor 7 Lite (NEM-L21) but I haven't found anything. The only valuable information I discovered was that Honor 7 Lite is probably a renamed Honor 5C for an european market. Some websites said it was renamed because there were changes in hardware (for example Honor 7 Lite supposedly doesn't have a fingerprint scanner, they say - but it's not true, from my experience I can say my phone does have it). So these websites can't be trusted anyway I guess. These two models look alike but I was thinking there could be differences anyway. I don't want to brick my phone. Has anybody tried to root this phone? Can anybody provide me any information about rooting it?
I'm sorry for my poor English and thank you very much for any answer.
Hi,
I have Honor 7 Lite NEM-L21 rooted by using method for Honor 5C. But before rooting, You must have an unlocked bootloader. Steps are:
1. unlock bootloader, after unlocking bootloader, phone will be wiped, so backup your data first - http://www.modaco.com/forums/topic/...our-honor-5c-official-and-unofficial-methods/
2. install custom twrp recovery for Honor 5c (known also as Huawei Nemo and Honor 7 Lite) - https://twrp.me/devices/huaweihonor5c.html
3. after installing twrp i recommend doing backup of boot, cust, oeminfo and system partitions to SD card
4. and now is possible install SuperSU zip from twrp recovery. Some instructions on the net recommends using the SuperSU-2.65 - https://download.chainfire.eu/921/SuperSU
Big Red Warning: for now, there are no firmware released for NEM-L21 in UPDATE.APP form for reflashing the phone from the Huawei eRecovery in case of if you bricked the phone. So, please do things carefully. I strongly recommends to do point 3 ASAP after installing twrp.
circulus said:
Hi,
I have Honor 7 Lite NEM-L21 rooted by using method for Honor 5C. But before rooting, You must have an unlocked bootloader. Steps are:
1. unlock bootloader, after unlocking bootloader, phone will be wiped, so backup your data first - http://www.modaco.com/forums/topic/...our-honor-5c-official-and-unofficial-methods/
2. install custom twrp recovery for Honor 5c (known also as Huawei Nemo and Honor 7 Lite) - https://twrp.me/devices/huaweihonor5c.html
3. after installing twrp i recommend doing backup of boot, cust, oeminfo and system partitions to SD card
4. and now is possible install SuperSU zip from twrp recovery. Some instructions on the net recommends using the SuperSU-2.65 - https://download.chainfire.eu/921/SuperSU
Big Red Warning: for now, there are no firmware released for NEM-L21 in UPDATE.APP form for reflashing the phone from the Huawei eRecovery in case of if you bricked the phone. So, please do things carefully. I strongly recommends to do point 3 ASAP after installing twrp.
Click to expand...
Click to collapse
+1. This is the only safest way OP.
Sent from my honor 5X using XDA Labs
Instructions for rooting Honor 7 Lite/5C NEM-L21 b100 are relatively easy to find and follow: unlock with Huawei's code, flash TWRP and SuperSu...
But for me, rooting before updating firmware was a big mistake! Wish I didn't unlock&root this phone yet; should have just updated with FF.
After rooting i wanted to FF update b100 -> b351 Nougat7/EMUI5... But it required stock recovery, which I had already flashed to TWRP, damn!
Now, another option would have been to flash custom ROM, but I didn't find great ROMs around, just somewhat commercial LineageOS (lacks e.g. dual-sim support)
Anyway, I tried to flash b100 -> b351 with TWRP, failed and ended up with test-keys firmware. Then tried to download FF, but the only input method in test-keys seemed to be google voice instead of keyboard = no success.
Then couldn't find stock recovery.img anywhere, so extracted it from stock update.app with extractor. Luckily the extractor had linux version too.
Then flashed stock recovery, updated with update.app method from test-keys to b132, then FF update to b351.
Doesn't seem possible to root b351 yet; now waiting for Nougat7/EMUI5-compatible version of TWRP.
Last time i modified some Android phone 5 years ago, so count me as n00b sharing this bad experience. Hopefully somebody could learn something
Hello everyone.
I tried rooting with the method mentioned by circulus. Running into a wall, can't get TWRP to start, only thing I get is the default EMUI recovery. Honor 7 lite, Android 6.0, EMUI 4.1.2 and bootloader is obviously unlocked.
Any ideas?
tehrek said:
Hello everyone.
I tried rooting with the method mentioned by circulus. Running into a wall, can't get TWRP to start, only thing I get is the default EMUI recovery. Honor 7 lite, Android 6.0, EMUI 4.1.2 and bootloader is obviously unlocked.
Any ideas?
Click to expand...
Click to collapse
Why you can't open TWRP, what your phone shows, if you tryin' to enter TWRP?
tehrek said:
Hello everyone.
I tried rooting with the method mentioned by circulus. Running into a wall, can't get TWRP to start, only thing I get is the default EMUI recovery. Honor 7 lite, Android 6.0, EMUI 4.1.2 and bootloader is obviously unlocked.
Any ideas?
Click to expand...
Click to collapse
Try to flash 3.0.2.0 Nemo TWRP, let me know if there are any problems left.
Got a Honor 7 lite, and i used special twrp and superSu from this post to root it :
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356 ---> for EMUI 5.X / Android Nougat
Work so fine.
Enjoy
Plz use a forum for honor 7 or 7 lite in xda . U will.get more support there than here
gopinaidu77 said:
Plz use a forum for honor 7 or 7 lite in xda . U will.get more support there than here
Click to expand...
Click to collapse
this is honor 7 lite xda forum... 5c=honor 7 lite....
thelous said:
this is honor 7 lite xda forum... 5c=honor 7 lite....
Click to expand...
Click to collapse
Hahahaha , never knew this . Thanks for making me aware of ..
Hi. I got a Honor 7 Lite NEM-L21 with Emui 5.0 and bootloader is unlocked. I have tried to flash TWRP with a pc with the command: fastboot flash recovery <filename>.img. The img file is in the platform-tools folder and cmd.exe says that it succeed. But when I try to reboot to recovery its just stuck in the screen your device is unlocked and cant be trusted your device is booting now and then nothing really happens. Any solution? Firmware: Nougat 7.0 B351
EeliX7 said:
Hi. I got a Honor 7 Lite NEM-L21 with Emui 5.0 and bootloader is unlocked. I have tried to flash TWRP with a pc with the command: fastboot flash recovery <filename>.img. The img file is in the platform-tools folder and cmd.exe says that it succeed. But when I try to reboot to recovery its just stuck in the screen your device is unlocked and cant be trusted your device is booting now and then nothing really happens. Any solution? Firmware: Nougat 7.0 B351
Click to expand...
Click to collapse
Holding power button and letting it reboot takes u to homescreen?
gopinaidu77 said:
Holding power button and letting it reboot takes u to homescreen?
Click to expand...
Click to collapse
No... Its stuck in the warning screen... I can still boot the system by holding power but if I attempt to reboot to recovery, its stuck in that warning. I can't access my PC just yet so it would be nice to be able to reboot to recovery without a PC.
EeliX7 said:
No... Its stuck in the warning screen... I can still boot the system by holding power but if I attempt to reboot to recovery, its stuck in that warning. I can't access my PC just yet so it would be nice to be able to reboot to recovery without a PC.
Click to expand...
Click to collapse
power off your device and make sure you don't have connections to phone ,then hold thevolume up and power after vibrate release power ,it will reboot to recovery
if it stucks flash the recovery again via fastboot
venugopalu007 said:
power off your device and make sure you don't have connections to phone ,then hold thevolume up and power after vibrate release power ,it will reboot to recovery
if it stucks flash the recovery again via fastboot
Click to expand...
Click to collapse
Flashed a P9 Lite version of TWRP, works great!
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356/page20
venugopalu007 said:
power off your device and make sure you don't have connections to phone ,then hold thevolume up and power after vibrate release power ,it will reboot to recovery
if it stucks flash the recovery again via fastboot
Click to expand...
Click to collapse
Do u know his Android version?
gopinaidu77 said:
Do u know his Android version?
Click to expand...
Click to collapse
emui 5.0 ,he said in his first post
venugopalu007 said:
emui 5.0 ,he said in his first post
Click to expand...
Click to collapse
Ok
Hi fellas.
Been busy but got an update, phone is successfully rooted now. Brainfarted a bit earlier and wasn't booting to TWRP.
Me no brain sometiems.
Okay, managed to get Nougat and root for my BTV-DL09. Here is a fast forward tutorial how to do that.
I could only root it by using Magisk, Supersu (even the special emui5 ones) did not work for me.
Files:
ROM: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1224/g490/v78425/f1/full/update.zip (BTV-DL09C233B336)
Data: http://update.hicloud.com:8180/TDS/...full/dualcu/cn/update_data_full_dualcu_cn.zip
TWRP, make sure to use twrp_BTV-DL09_5_greatslon.img : https://androidfilehost.com/?fid=817550096634750327 (thanks to greatslon)
Root: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I came from version BTV-DL09C100B006, this is how I did it:
Bootloader must be unlocked, custom recovery installed (Do not install the one for EMUI5 yet, it won't boot).
Enter recovery by adb reboot recovery
Wipe, reboot recovery
Flash ROM + Data
Flash Magisk Root
Flash Recovery again (will be overwritten by the udate)
Reboot, Done.
Download playstore / vending APK from APKmirror: http://www.apkmirror.com/apk/google-inc/google-play-store/google-play-store-7-6-08-release/ and transfer it on the device.
There is an app called "Downloads" preinstalled (there is pretty much nothing on the tablet, not even a browser after flashing it), you can use that to open/install the play store APK and get things going.
Please make sure you know what you are doing and you know how to recover from a soft brick. I take no responsibility if anything goes wrong.
The version you should have now is BTV-DL09C233B336 with security update from February included.
Thank you very much, and how to downgrade ?
can someone upload a youtube video showing us the the new EMUI5 on this tablet, and give us an overview about the new features and performance?
Beware that:
1) this is a chinese ROM
2) Nougat version 7.0.0
3) if you don't like the downgrade process is difficult
4) if you want to downgrade have to find another ROM!!!
any idea to downgrade please
drlsd said:
any idea to downgrade please
Click to expand...
Click to collapse
You need another ROM, FULL not OTA.
1) extract from the .APP the recovery (both) and boot images
https://forum.xda-developers.com/showthread.php?t=2433454
2) get a build.prop from the ROM you want to install
3) copy the build.prop in the /system folder, overwriting the original: now the old ROM will unlikely boot!
4) go in fastboot mode and flash recovery, recovery2 and boot images
5) copy the update.app in the dload folder
6) reboot and maintain pressed both volume keys to start recovery
7) if you are lucky the recovery will install the ROM.
Of course you will loose all your data (uhm, not even but... MAKE A BACKUP before!)
If you don't know well how to do ALL this don't even try!
If you have the original european LTE ROM please share it!!!
Nicola
2) get a build.prop from the ROM you want to install
i can t found these file in the new full rom (in my case BTV-DL09C233B035 )
drlsd said:
2) get a build.prop from the ROM you want to install
i can t found these file in the new full rom (in my case BTV-DL09C233B035 )
Click to expand...
Click to collapse
I attached that I extracted from the same ROM.
nicolap8 said:
I attached that I extracted from the same ROM.
Click to expand...
Click to collapse
Please share your oeminfo if you can. Thank you.
thank u very muatch nicolap8 ,is it normal i have NRD90M test-keys like number of software in my medipad m3 european LTE ?
drlsd said:
thank u very muatch nicolap8 ,is it normal i have NRD90M test-keys like number of software in my medipad m3 european LTE ?
Click to expand...
Click to collapse
What are you saying about???
It depends from which ROM have you installed!
Often the truly incompetent Huawei developers uses the wrong keys...
nicolap8 said:
What are you saying about???
It depends from which ROM have you installed!
Often the truly incompetent Huawei developers uses the wrong keys...
Click to expand...
Click to collapse
from europien lte to BTV-DL09C233B336 and now my build verson is NDR90M test-key
nicolap8 said:
You need another ROM, FULL not OTA.
1) extract from the .APP the recovery (both) and boot images
https://forum.xda-developers.com/showthread.php?t=2433454
2) get a build.prop from the ROM you want to install
3) copy the build.prop in the /system folder, overwriting the original: now the old ROM will unlikely boot!
4) go in fastboot mode and flash recovery, recovery2 and boot images
5) copy the update.app in the dload folder
6) reboot and maintain pressed both volume keys to start recovery
7) if you are lucky the recovery will install the ROM.
Of course you will loose all your data (uhm, not even but... MAKE A BACKUP before!)
If you don't know well how to do ALL this don't even try!
If you have the original european LTE ROM please share it!!!
Nicola
Click to expand...
Click to collapse
rom-stock-btv-dl09c100b009-european
https://forum.xda-developers.com/mediapad-m3/how-to/rom-stock-btv-dl09c100b009-european-t3588477
nicolap8 said:
What are you saying about???
It depends from which ROM have you installed!
Often the truly incompetent Huawei developers uses the wrong keys...
Click to expand...
Click to collapse
Hi nicolap8 even I followed the same steps as you suggested with the file links you shared and I am also NRD90M test-keys on my Mediapad BTV-DL09
installing Magisk first time gave me a fail message but second time it works like a charm. thanks
could you help, thanks
Switched to eu rom, updated to nougat.. unlocked bootloader and rooted with magisk
But using magisk caused the fingerprint sensor not to work at all and there is no settings for the FP in the settings menu.
Uninstalled magisk and the fingerprint worked again but obviously I lost root.
Flashing SuperSU didn't work gives an error in twrp no matter what version I try.
Any idea on how to root without compromising the fingerprint sensor?? :/
Half Alive said:
Flashing SuperSU didn't work gives an error in twrp no matter what version I try.
Click to expand...
Click to collapse
Error? we do not see errors...
Post recovery.log
question
how to flash firmware for Huawei Mediapad M3 ? I know how to do it for galaxy with odin ?.
where I download firmware for Huawei Mediapad M3 ?
carlo67 said:
question
how to flash firmware for Huawei Mediapad M3 ? I know how to do it for galaxy with odin ?.
where I download firmware for Huawei Mediapad M3 ?
Click to expand...
Click to collapse
You have more than 600 posts and yet have not understod the rules here???
SEARCH and READ!
Fingerprint Button
Hello, velocity.
Worked for me, thx.
The fingerprint button doesn't work anymore.
Is there a way to activate it (without loosing root by uninstalling magisk)?
Kind regards
veloc1ty said:
Okay, managed to get Nougat and root for my BTV-DL09. Here is a fast forward tutorial how to do that.
I could only root it by using Magisk, Supersu (even the special emui5 ones) did not work for me.
Files:
ROM: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1224/g490/v78425/f1/full/update.zip (BTV-DL09C233B336)
Data: http://update.hicloud.com:8180/TDS/...full/dualcu/cn/update_data_full_dualcu_cn.zip
Click to expand...
Click to collapse
Those Links are dead. Anyone save a copy? Willing to share? Thanks.
Huawei P smart TWRP 3.2.1-0 EMUI 8.0FIG-LX1
Features:
Decryption DATA = works
• MTP and OTG = working
• Backup and Recovery = works
Note:
If you ask for a password to decrypt data
pin-code or password (it's worth it) to enter the screen you need to enter.
fastboot flash recovery_ramdisk twrp_p_smart.img
Автор: @Pretoriano80 XDA
@Pretoriano80 XDA
New TWRP 05.06.2018
fixed mounting problems, I corrected it (added images for firmware, including and here, added sections for wipe and backup).
Download New 05.06.2018
https://drive.google.com/file/d/1U68vtVbVwf4y1EELlOigLS6Wemc0A_P6/view?usp=drivesdk
Download
Stock recovery
https://drive.google.com/file/d/1dFFjCG2xeg9E08SZFA7jC9y21iX1sJgD/view?usp=drivesdk
Installation instructions for twrp
Preliminarily you must enable the factory unlock and unlock the loader.
ADB P SMART is allocated to the disk C better than one files with the image twrp, then start the search in Windows, the command line open from the administrator, then enter the command, but the phone must be in fastboot on the switched off phone, press the volume swing - and connect the cable install drivers, then on the command line write fastboot flash recovery_ramdisk twrp_p_smart.img Enter wait as all the settings, fastboot reboot. Reboot to the system there by clicking the volume swing + should get into TWRP.
DOWNLOAD ADB TWRP
https://drive.google.com/file/d/1GDUfPmDPf6Rp1o0dwdNoSeUC74JZGCiy/view?usp=drivesdk[\HIDE]
DOWNLOAD DRIVERS
[url]https://yadi.sk/d/YTsmimThu5nNK[/url][\HIDE]
Is this the same twrp a reported by ChinHon here?
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705
andymore said:
Is this the same twrp a reported by ChinHon here?
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705
Click to expand...
Click to collapse
This is a new, updated Recovery TWRP, not as if it's not about ChinHon it. Here, almost everything works, except for the erecovery section.
andymore said:
Is this the same twrp a reported by ChinHon here?
Click to expand...
Click to collapse
This is a new, updated Recovery TWRP, not as if it's not about ChinHon it. Here, almost everything works, except for the erecovery section.
Are there any issues performing wipes / factory resets with this version?
mwarner said:
Are there any issues performing wipes / factory resets with this version?
Click to expand...
Click to collapse
Problems were not observed, reset settings, formatting is working.
with the old Twrp from ChincHon I had many problems FCs but with these I have no problems with AoKP and Ressurection Remix super finally a useful Recovery Thank you for that
Dude, THANK YOU. Every other guide I read for installing TWRP on the P Smart just said to run fastboot flash recovery <filename> and it never worked. Following your instructions has gotten the recovery installed.
Saying that though; I've booted into recovery and all I've got is TWRP splash page. Anyone else had that issue?
noobstyle1337 said:
with the old Twrp from ChincHon I had many problems FCs but with these I have no problems with AoKP and Ressurection Remix super finally a useful Recovery Thank you for that
Click to expand...
Click to collapse
Not at all, if any problems write to me.
Trism said:
Dude, THANK YOU. Every other guide I read for installing TWRP on the P Smart just said to run fastboot flash recovery <filename> and it never worked. Following your instructions has gotten the recovery installed.
Saying that though; I've booted into recovery and all I've got is TWRP splash page. Anyone else had that issue?
Click to expand...
Click to collapse
You put on the official firmware p smart? With the modified kernel, there are some problems with the twrp input.
mak6021 said:
You put on the official firmware p smart? With the modified kernel, there are some problems with the twrp input.
Click to expand...
Click to collapse
Ah, good point. I installed AOSP 8.1 first, then installed TWRP. Any advice on what I can do to get around this? Is there a different version of TWRP I could try?
Trism said:
Ah, good point. I installed AOSP 8.1 first, then installed TWRP. Any advice on what I can do to get around this? Is there a different version of TWRP I could try?
Click to expand...
Click to collapse
I updated twrp in the post look at the beginning of the second link to download. Maybe it will do
.Try in erecovery to install twrp
where do i find the stock recovery if i want to restore it ???
where do i find the stock recovery for the p smart fig la1 if i want to restore it ???
ilyes9999 said:
where do i find the stock recovery for the p smart fig la1 if i want to restore it ???
Click to expand...
Click to collapse
Download
Stock recovery
https://drive.google.com/file/d/1dFFjCG2xeg9E08SZFA7jC9y21iX1sJgD/view?usp=drivesdk
[/QUOTE]
with Resurrection Remix everything works best no Fcs everything top only load lasts 4 hours
fig la1 ?
does it work for fig la1
noobstyle1337 said:
with Resurrection Remix everything works best no Fcs everything top only load lasts 4 hours
Click to expand...
Click to collapse
Honestly I do not know what this download is 4 hours is not very good.
And where to download Resurrection Remix for Huawei P Smart or enjoy 7s?
ilyes9999 said:
does it work for fig la1
Click to expand...
Click to collapse
Yes it works.
mak6021 said:
Honestly I do not know what this download is 4 hours is not very good.
And where to download Resurrection Remix for Huawei P Smart or enjoy 7s?
Click to expand...
Click to collapse
Oh sorry for my Bad english ..Batterie loading is 4 hours it is a bit slow
test assembly, it is possible to solve some problems.
If something does not work, write here.
Download.
https://drive.google.com/file/d/1PSbZCc6UdelMag56kTKVebpajItGtWnM/view?usp=drivesdk
TWRP for EMUI 9.1
THIS TWRP IS FOR DEVICES WITH KIRIN 65x SOC (HI6250) RUNNING EMUI 9.1 AND NOT EMUI 8
What's different from TWRP for Android 8?
erecovery_ramdisk option to flash .img
system_root partition for 9.1
What works now?
You can now flash .zip like Gapps and they'll work (before it gave error 64)
What doesn't work?
At the moment, I don't know if ADB sideload works.
Otherwise, everything seems to be working.
How to flash this TWRP
To recovery_ramdisk
Code:
fastboot flash recovery_ramdisk [TWRP].img
I DIDN'T BUILD ANY OF THIS
I only modified a TWRP (which I don't know the author, sorry) to make it work good on hi6250 EMUI 9.1 devices.
I would like to have the hardware and knowledge to build and develop new stuff but at the moment I can't.
Download - https://drive.google.com/open?id=10VONtu_Bf6grW60N7K8gMrzQSG-rswni
Feel free to contact me on Telegram
https://t.me/GelberVogel (PM) - temporary
screenshots
This guy's doing gods work, saved me from throwing a perfectly good device into the trash. Working perfectly, tested on an ANE-LX1!
Anyone know ROMs that will work with emui 9?
I Know openkirin a long time but the Bluetooth is restarting in the emui 9 based builds.
with this recovery boot the gsi roms? currently only the openkirin gsi boot, but using adb... All the gsi I've flashed by adb or the previous recovery give bootlop
joaomoreira1001 said:
Anyone know ROMs that will work with emui 9?
I Know openkirin a long time but the Bluetooth is restarting in the emui 9 based builds.
Click to expand...
Click to collapse
Probably phh treble
Linux Lounge said:
Probably phh treble
Click to expand...
Click to collapse
i will try it thanks
---------- Post added at 09:09 PM ---------- Previous post was at 08:48 PM ----------
Linux Lounge said:
Probably phh treble
Click to expand...
Click to collapse
nope that does not boot
Yellow_B_ird said:
TWRP for EMUI 9.1
What's different from TWRP for Android 8?
erecovery_ramdisk option to flash .img
system_root partition for 9.1
Click to expand...
Click to collapse
Hello, please can someone tell me how to flash it in erecovery_ramdisk partition?
I have recovery brick and i can't flash it in recovery_ramdisk...
This is my last hope!
Mustaine635 said:
Hello, please can someone tell me how to flash it in erecovery_ramdisk partition?
I have recovery brick and i can't flash it in recovery_ramdisk...
This is my last hope!
Click to expand...
Click to collapse
Tell me what device do you have (luckily I came back to XDA early enough, I hope)
Also, try flashing stock kernel (I can send mine for HUAWEI P Smart 2018 FIG-LX1C432 EMUI 9.1 B120)
Yellow_B_ird said:
Tell me what device do you have (luckily I came back to XDA early enough, I hope)
Also, try flashing stock kernel (I can send mine for HUAWEI P Smart 2018 FIG-LX1C432 EMUI 9.1 B120)
Click to expand...
Click to collapse
I have p smart fig-lx1.
I tried to flash it using fastboot flash erecevery_ramdisk [file].img but it says failed...
The standard recovery was bricked because i used hurupdater to update to emui 9.1... The phone works but i have no recovery so i can't do anything...
Yellow_B_ird said:
Tell me what device do you have (luckily I came back to XDA early enough, I hope)
Also, try flashing stock kernel (I can send mine for HUAWEI P Smart 2018 FIG-LX1C432 EMUI 9.1 B120)
Click to expand...
Click to collapse
It works! I had to flash 3 files for the stock recovery (recovery_ramdisk, _vbmeta and _vendor). Then i flash the twrp recovery and it works. The only problem is that when i browse internal storage, the folders name are all random characters... Why that?
Another question is, how can i root my device now?
Mustaine635 said:
It works! I had to flash 3 files for the stock recovery (recovery_ramdisk, _vbmeta and _vendor). Then i flash the twrp recovery and it works. The only problem is that when i browse internal storage, the folders name are all random characters... Why that?
Another question is, how can i root my device now?
Click to expand...
Click to collapse
Glad it worked!
Just flash Magisk like you would with any TWRP assuming it works. If you want recovery and root in a stupid way.. just flash my TWRP to recovery and in recovery, flash my or any other TWRP/recovery to e-recovery and after that, flash Magisk like usual.
Thank you for the build. Any chance of flashing this on a device with locked bootloader, like using an official flash tool to flash a signed recovery or using e-recovery (I have experience with bootloader and flashing but not with Huawei/Kyrin)?
I keep getting a (remote: partition length get error) error ... Any help ?
Thanks a lot!! :good:
The Google Drive Link doesn't work!
I am trying to root my Huawei P Smart but the Google Drive Link for TWRP doesn't work https://forum.xda-developers.com/huawei-p-smart/development/recovery-twrp-3-2-1-0-t3953343
Was your Google account terminated. If you are able to can you send me the TWRP Image or if your Google account works can you upload the TWRP image to Google Drive?
Love from Greece![/QUOTE]
Hi, gelber here.
I'm sorry for the confusion, but I really barely touch XDA and as I deleted my old Google account, I lost access to this XDA account (I_am_gelber) and to that gdrive link. However, I can defo give the file back in a bit but I'm surely gonna forget. If you really want the file, please pm me at t.me/ActuallyNotGelb since I still need to give it a quick find.
Thanks!
ActuallyNotGelb said:
Hi, gelber here.
I'm sorry for the confusion, but I really barely touch XDA and as I deleted my old Google account, I lost access to this XDA account (I_am_gelber) and to that gdrive link. However, I can defo give the file back in a bit but I'm surely gonna forget. If you really want the file, please pm me at t.me/ActuallyNotGelb since I still need to give it a quick find.
Thanks!
Click to expand...
Click to collapse
Can you please upload the file to some website. I'm unable to create a Telegram account right now so can you please upload the image to any website? It would mean a lot for me for you to do that!
GreekProgrammer said:
Can you please upload the file to some website. I'm unable to create a Telegram account right now so can you please upload the image to any website? It would mean a lot for me for you to do that!
Click to expand...
Click to collapse
Any luck?