Device Settings Menu Guide, Tips & Discussions
Part 1 - Connections
If you're new to this series or want to see the index, please read Post #2 first.
The post has been updated as per the settings menu in latest Pie update.[/CENTER]
Wifi
Click on any network:
View supported Network speed, allocated IP address, gateway IP.
Toggle 'Auto Reconnect' to allow/disallow device to connect automatically to the network if it's in range.
Hold on any network > Manage network settings > Advanced > Set Static IP and DNS; Set Proxy;
Wifi Direct: Turn on Wifi Direct on a nearby device as well to transfer files wirelessly and fastly (speed up to gateway supported speed).
Menu > Advanced:
Turn on Wi-Fi Automatically: Your device will automatically enable Wi-Fi where you use it frequently. For example, you can disable your WiFi when you go out and you won't need to enable it again when you get back home. Tasker handles this job for me (try IFTTT for simpler setup).
Wi-Fi power saving mode: (On Pie, hop to developer mode) Analyzes your usage pattern and accordingly toggles WiFi. For example, if you get WhatsApp messages every 30 minutes on an average, the device learns about this traffic pattern and can toggle WiFi accordingly to fetch notifications every 30 minutes or whatsoever period is calculated. I keep this disabled as my usage pattern, like most of you, is dynamic. Better use App Sleep or Hibernation Apps like Greenify to save battery. Learn more about this mode here.
Wi-Fi control history: View apps that have toggled Wi-Fi recently. You can figure out if there's any culprit app that is toggling your Wi-Fi frequently when you have explicitly turned it off/on.
Hotspot 2.0: Automatically connects to APs that support Hotspot 2.0 or 802.11u. Network providers are themselves upgrading existing WiFi in public areas like airports and encryption is a must for Hotspot 2.0 so you can trust and rely on it while you don't have to manually guess the right network. Learn more about Hotspot 2.0 here.
WPS push button; WPS PIN Entry: (Pie doesn't support WPS but Google says it's coming back, Read here) Connect the device to WiFi by pushing WPS button on the router or entering WPS PIN in case these are enabled on the router. Learn about WPS here.
Install network certificates: Normally not needed. Some organization would need you to install certificates to access their domains. Same as what you do on PC to install certificates.
View device's MAC address and allocated IPv6/IPv4. Learn about MAC and IPs here.
Bluetooth
When the Bluetooth is ON, you can STOP/SCAN for nearby devices manually. Keep BT on for playing with following settings.
Menu > Advanced:
Dual Audio: Enables your device to connect to 2 different audio devices and play the same audio on both of them. Samsung explains this here.
Media volume sync: In case the connected audio device supports this, you can change the player's volume by your device's volume rockers by enabling this i.e. you don't have to manually raise the volume to the fullest on both your device and the connected player to get the highest volume possible for your house party.
Ringtone sync: Suggest usage?
Bluetooth control history: Similar as 'WiFi control history' above.
Phone visibility: (Moved to Separate section after Bluetooth in Pie, please tell if it works for BT as well) Allow devices (with Samsung Connect) to find your device for connection. You can disable it unless you live in a Smart Home or transfer files from other devices more often. Learn more about this mode here.
NFC and payment
It's turned ON by default on a new phone so do turn it OFF first. Samsung Pay will turn that ON if needed. The best thing about Samsung's flagship - Samsung Pay uses both NFC and MST (no other brand can do this) for payments. In case you don't know about MST (patented by LoopPay), must read here. MST works everywhere so I've keep NFC disabled.
Android Beam: Allows you to share stuff when you tap your phone with some other-phone-with-already-enabled-NFC.
Tap and pay: Select the default app for Payments and Others. Your default app will open up when you, for instance, tap your phone on an NFC-enabled POS (of course you need NFC to remain ON beforehand). Change 'If open app supports Tap and Pay' to 'Use open app instead of Samsung Pay' in case you want the App's own NFC payment feature, for example, in ICICI's Pockets.
Default NFC Method: By default and normally needed, 'Auto select'. In case you are the curious breed, learn about the different options here.
Flight Mode
Disables your operator's network. Since enabling this will also disable WiFi and Bluetooth altogether, you can turn back these two on without toggling flight mode.
Mobile networks
Data roaming: Enable it if your carrier doesn't charge you for roaming or you're rich enough.
VoLTE calls Primary: You'll see this in case your carrier supports VoLTE calling. #JioWaale
Network mode: By default, 'auto connect'. You can play with the options in case you're facing network mode changing issues or want to save battery (put to 2G only).
Access Point Names: I recommend you to request or configure your operator's settings for the first time even if it had been automatically fetched.
Data usage
Data saver: Formerly known as 'Restrict background data'. Your background apps will stop using network data i.e. you'll receive WhatsApp notifications only when you open the app again. You can also whitelist apps in 'Allow app while Data saver on'. This feature can help a lot in saving battery or making you check the phone less when you're hanging out with your girl. Me no girl so no enable!
Mobile data usage; Billing cycle and data warning: Do check this in a while to review the apps that uses most of your mobile data (maybe you don't need those apps that much on mobile data); Change your operator billing cycle, set data warning and enable data limit in case your operator doesn't give you free GBs.
Wi-Fi data usage; Restrict networks: Like mobile data, you can also review your Wi-Fi usage. Do review it once in a while to identify data-hungry apps that can affect battery and CPU as well; 'Restrict networks' (not available in Pie) helps you define your WiFi networks as 'metered'. It can be useful in a situation where a WiFi network you use is in fact a hotspot running on a device that uses mobile data. You can now restrict apps to use background data as described before in 'Data Saver'.
SIM card manager
Select Icon, Name and Network mode (described above) for the corresponding 'SIM slot' (not the SIM). Select preferred slot for calls, messaging and data. Learn about Smart Dual SIM here.
Mobile Hotspot and Tethering
Mobile Hotspot:
Wi-Fi sharing: In addition to mobile data, you can also share your Wi-Fi. This can be helpful in case you don't want to reveal your network or its credentials or don't know about them.
Menu > Allowed Devices: Enter MAC addresses of clients you want only to connect to your hotspot. Same as MAC filtering in routers.
Menu > Configure Mobile Hotspot; Timeout: Enable 'Hide my device' to stop exposing your SSID. Use 'WPA2 PSK' (Learn about wireless encryption here). 'Power saving mode' is similar to PMS in WiFi Advanced. Keep PMF on by default and change in case client doesn't support; Keep timeout low so that hotspot turns itself OFF earlier in case there's no client or change to 'Never Timeout' if you are going to need it for some time.
Bluetooth tethering; USB tethering: Learn about BT/USB tethering here.
More connection settings
Nearby device scanning: Although it uses Bluetooth Low Energy, I don't live in a Smart Home so have it disabled. If you enable it, you get notifications for nearby devices like TVs that support connections through your device (will annoy you at airports).
Printing: Do download Google Cloud Print and any other printing plugin required by your or your organization's printer.
MirrorLink: Great feature but I don't own a car. Learn more here.
Download Booster: Uses both WiFi and LTE at the same time to download apps over 30MB from Play Store and Galaxy Apps. In case you want that app as soon as possible.
VPN: Configure your VPNs here in case you have. I use Psiphon. You can also manually configure profiles as you do on PC.
Ethernet: Yes, you can use wired connection on your device too. Discussions here.
Private DNS: Pie supports DNS over HTTP/TCP and I recommend reading about this here. I use 1dot1dot1dot1.cloudflare-dns.com.
Series - Full Menu Guide Explained
Series - Device Settings Menu Guide
Hey XDA! I just got free from the initial setup of my Galaxy Note9. I don't know how many of you do this but I'm one of a kind that gives a considerable amount of time to explore every setting, feature and every single option whenever I get a new device or even when I factory reset the existing one. It's been years since I have started with this curiosity and I have never found an 'all-in-one' menu guide to explain each and every option in the device. Yes, you could also simply google the option you want to know about but how about compiling all of them in one guide? I don't know if this experiment would work or not but here's I am starting with this. I have spent the past three weeks taking out time whenever I could to compile this guide.
There are a couple of reasons I had decided upon to start with this series. Firstly, I want to help newbies (or even experienced) out there to explore and know about every feature or option your device could offer. I have seen many duplicate threads that are created every day to query fellow users even about an individual but unfamiliar option in the settings. I intend to do my bit to clear this clutter and help potential askers to get answers beforehand. Secondly, this guide could serve as a manual in case you want to find or get briefed about an option. You could then simply 'Find in a page' over the threads or simply use XDA's 'search in the thread' option to save your time. Thirdly, since I've broken the settings into different threads, this could help users engage and discuss over a particular device's super-menu and spread their knowledge, come up with new ideas and explore more of their devices. Fourthly, this series is not constrained to Note9 only. The settings on every Android device out there is similar and you would be able to find any common to your device settings here as well. Fifthly, since I have provided links and sources to some options, this can serve as directory map as well. Sixthly, this guide consists of tips for many options that you won't probably find normally.
This guide is intended and recommended to be read by anyone at least once. If you're reading a thread for the first, I recommend you to open up the corresponding settings in your phone and read the settings description in case there is. All the threads are arranged in the same order as the settings would come up. You could then simply read out my description of the same, my selected configuration and hyperlinks to some articles or videos in case you're the curious breed. This guide is strongly recommended after a fresh start. I want you all to give some time to explore each and every option your device can offer.
Hope this experiment lives up to the marks. Both criticism and appreciation are greatly needed and appreciated. Please comment.
I've tried to explain each option you could find by going deep into any setting. No matter whatever links I have provided, I will feel grateful if you want me to explain any feature more than I have done already. Please ask questions related to any settings. Do provide me suggestions and your take on my configuration. Please provide me with more guides and articles for a particular feature. I want to have the precious contribution of XDA members in this guide. Discussion over any feature, setting, your configuration, did-you-knows and anything else is greatly appreciated. This is a newbie-friendly place so don't hesitate to ask questions - besides the fellow XDA members, I'm always here for you.
Regards,
Paras Lehana
Index
Part 1 - Connections
Part 2 - Sounds and vibration, Notifications, Wallpaper and themes
Part 3 - Display, Lock screen, Biometrics and security
Part 4 - Advanced features, Device maintenance, Apps
Part 5 - Cloud and accounts, Google, Accessibility, General management, Software update, User manual, About phone, Developer options
-- Reserved for FAQs --
Why are you posting this?
There's a very good "USER MANUAL" on the "Samsung"-site available:
User Manual Samsung Galaxy Note9
henklbr said:
Why are you posting this?
There's a very good "USER MANUAL" on the "Samsung"-site available:
User Manual Samsung Galaxy Note9
Click to expand...
Click to collapse
You have commented the same query on each of my parts. I have already answered you here where the similar discussion is already going on. Let's discuss there and keep this thread clean. Also, the 'why am I posting this' is already described in the Introductory Post.
Is there a way to toggle the "WiFi networks available" notification off?. It seems Samsung's removed this option from the advanced WiFi menu as well as grayed it out from the advanced notifications panel. Thanks.
astrodemoniac said:
Is there a way to toggle the "WiFi networks available" notification off?. It seems Samsung's removed this option from the advanced WiFi menu as well as grayed it out from the advanced notifications panel. Thanks.
Click to expand...
Click to collapse
I tried searching for this on the internet and found that a lot of users are annoyed by this. Did you try disabling Wi-Fi scanning in Connections > Location > Improve accuracy ? Do you even get notifications when your Wi-Fi is turned off? Next time you get this notification, long tap on the notification to know which system package/app is firing this notification. Try disabling it from there. And, can you post screenshot of "advanced notifications panel" where you're seeing grayed out option?
Can the settings menu be sorted alphabetically? in either lineage or stock roms
Problem with 192.168.100.1 address
Everytime I type in the 192.168.100.1 address, I receive a message "Internet Explorer Cannot Display
Webpage". I have tried this several times and it doesn't connect me to the website.
HELP
Related
So I just discovered the magical world of tasker, and am loving it! Totally worth the money, and one of the best apps to have (the best if you know how to maximise its use)! I have been experimenting a bit with it, so I don't have many profiles. I'm sure many folks here will be using tasker and would be having some great profiles, so I'm looking forward to hearing some suggestions! The profiles I use are:
1. WiFi off at night, from 00:45 to 08:00, except WhatsApp, Play Store, Quora
2. Airplane mode at night, from 00:30 to 07:00
3. Use of interactive CPU governor when using Real Racing 3, and revert to lionfish governor after exiting app(Kernel adiutor profiles do this for me). I also added a condition to use auto-rotate when playing the game, and revert to portrait orientation after closing the app.
4. Auto-sync every two hours, from 08:00 to 20:00 (I would like to improve this to auto-sync only Gmail, would welcome suggestions on how to do this from any tasker experts out here )
I would love to implement more profiles and automate my phone, so looking for ideas.
Need a tasker profile which can disable my mobile data only for some specific apps.it means If I start those apps then my mobile data would automatically disabled and when I close them Data service should be enbled.If u can help on this then That wud be very helpfull
Nothing very fancy for me - right now just have it turning on my wifi hotspot when it detects my car's bluetooth connection so my stereo can use the internet.
It sounds like you are taking it pretty far, @varunadi. You should check out https://www.reddit.com/r/tasker for more cool ideas.
koimr said:
Nothing very fancy for me - right now just have it turning on my wifi hotspot when it detects my car's bluetooth connection so my stereo can use the internet.
It sounds like you are taking it pretty far, @varunadi. You should check out https://www.reddit.com/r/tasker for more cool ideas.
Click to expand...
Click to collapse
Yep, I am looking to maximise the use of this app, so thanks for that link, will check it out!
anks095 said:
Need a tasker profile which can disable my mobile data only for some specific apps.it means If I start those apps then my mobile data would automatically disabled and when I close them Data service should be enbled.If u can help on this then That wud be very helpfull
Click to expand...
Click to collapse
I'm still finding my way around tasker, reading a lot of tutorials so once I figure it out I'll let you know.
anks095 said:
Need a tasker profile which can disable my mobile data only for some specific apps.it means If I start those apps then my mobile data would automatically disabled and when I close them Data service should be enbled.If u can help on this then That wud be very helpfull
Click to expand...
Click to collapse
I don't know if you can disable mobile data entirely (not just background which Android can do already) for just certain apps.
Perhaps it would be easier to use something like Netguard.
I've never used it but the description says "Applications can individually be allowed or denied access to your Wi-Fi and/or mobile connection."
koimr said:
I don't know if you can disable mobile data entirely (not just background which Android can do already) for just certain apps.
Perhaps it would be easier to use something like Netguard.
I've never used it but the description says "Applications can individually be allowed or denied access to your Wi-Fi and/or mobile connection."
Click to expand...
Click to collapse
Can't the secure settings plugin be used for that purpose? Toggle data on/off I mean.
varunadi said:
Can't the secure settings plugin be used for that purpose? Toggle data on/off I mean.
Click to expand...
Click to collapse
I was actually going to suggest that as I have it installed already but when I tried it didn't work.
The "Mobile data" toggle was unavailable because it claims I don't have root. However, I'm definitely rooted and there's no listing (saying denied or otherwise) in SuperSU for Secure Settings so it didn't even ask for root. I'm not too surprised as SS hasn't been updated in over a year and a lot of the Play Store comments mention mobile data toggle specifically not working either (among other things). Too bad as it was pretty powerful and of course I think I paid for it right after its last update.
Not getting SS working for me might just be my problem and perhaps someone else can get it going.
I was also going to suggest [APP][2.2+][ROOT] Toggle Data 5.0 (xda-exclusive free version) but then I read more about what @anks095 said which was "can disable my mobile data only for some specific apps" so I'm guessing he just wants certain apps restricted and not all (although the next sentence seems to say otherwise but I might be reading it incorrectly). I'm not too sure that can be done via Tasker/SS - my guess is that it's an "all-or-nothing" kinda thing for mobile data so the VPN thing might be the only way.
I use a similiar app called automagic but some of the things that I got my tasker like program to do are: lockscreen enable/disable through wi-fi at trusted places (don't like geofencing due to battery), when connected to the bluetooth of my car. Auto silent 5 min before a meeting, but if not connected to my smartwatch then vibrate. And lastly sms emergency location request where my family can send a keyword and my phone will automatically send location.
joeanca said:
I use a similiar app called automagic but some of the things that I got my tasker like program to do are: lockscreen enable/disable through wi-fi at trusted places (don't like geofencing due to battery), when connected to the bluetooth of my car. Auto silent 5 min before a meeting, but if not connected to my smartwatch then vibrate. And lastly sms emergency location request where my family can send a keyword and my phone will automatically send location.
Click to expand...
Click to collapse
How is the lockscreen one working for you? I find the built-in SmartLock to be really unreliable but when I tried to do lockscreen stuff before (last year) there was some bug in either Tasker or Secure Settings that would sometimes keep your screen black with just the nav buttons visible present. I'll have to re-try now.
That sms emergency request thing sounds cool! Can the recipient open the location in Maps to see exactly where you are?
Without issues I set it so that it clears the password. Makes it so that I have to swipe to unlock. As for the location, yes it sends coordinates and the user in the other end taps it to bring up Google maps.
Sent from my XT1563 using Tapatalk
joeanca said:
Without issues I set it so that it clears the password. Makes it so that I have to swipe to unlock. As for the location, yes it sends coordinates and the user in the other end taps it to bring up Google maps.
Sent from my XT1563 using Tapatalk
Click to expand...
Click to collapse
Thank you very much - clearing the password was the key! I had been trying before to disable the keyguard entirely so I wouldn't even have to swipe but that's where the problem/bug came in. Thinking about it that makes more sense to have at least a swipe because I'd end up calling people from my pocket by mistake. So thanks again!
Tasker...hmmm. Bought it, but much to complicated for me. Macrodroid is much easier to understand and can also do complicated automation with a normal user friendly interface. I tried to like Tasker, but the more and more I tried the more stupid I felt.
Just wondering if any one has already made a list? I have a BIND DNS server running at home and was hoping to add it to a blackhole.
It's hard to make a list because it's hard to keep up. They change a lot and there are tons of them. My advice: Download NetGuard from the play store. Buying the options to view the logs and to filter are well worth it. With those two purchases, you can choose to block IP strings or single IPs the apps try to connect to. Freebies include: Lockdown the wireless connection so NO app can connect regardless of it's set rules. A lock will appear next to every app installed on your device. Click each one to allow or block internet access when lockdown is active, and make sure to check the WiFi symbol to the right to make sure the corresponding color is correct. You can also choose to start or stop logging on a per app basis, you can delete the list of IPs the app has tried to connect to Doing so refreshes the list from scratch. So if you blocked a string of IPs, tapping the trash can would reset not just that string, but the entire list. You can enable IP resolving which determines the hostname/web address of the attempted connection. It will automatically block those names/domains/connections in the host names list. Host files need to be manually updated. I try to click it once a week or so.
It's a very in-depth app with a lot of information and options, and the ones I list above, are some of the best it offers. Another good one is NoRoot Data Firewall, less advanced, not nearly as many options. You have to resolve IPs yourself to manually block hostnames. Last but not least, NoRoot Firewall is very simple to use.
Greetings everyone,
https://youtu.be/T9aKmLTujik
What you see above is a "Control Panel" for my own Galaxy S7 Edge. I host this on my own website.
This means it can be seen and accessed from anywhere in the world, on any browser and/or device.
For privacy and security, I will implement a login system in the near future.
It has a couple of neat features, but since they are written in Dutch I will translate them to English:
Information:
Check battery level/percentage and check if your phone is being charged or not
Warns the user from the control panel if the battery is low.
Warns the user from the control panel to pull out the plug out of charging when it is fully charged
Check if your phone is in a light or dark place. I have optimized the light sensor as best as I could, The results are pretty accurate
Clipboard of your current copied content on your phone
Shows the phone model and the date and time of the last update sent from your phone
Check if Bluetooth is enabled or not
Check if Wifi is enabled or not
Show the current WiFi name, Wifi Speed, Wifi Channel & Wifi Signal Strength
Show the current Data Carrier / Mobile Signal strength (Weak, Normal, Strong)
Shows the current Call Volume percentage
Shows the current Media Volume percentage
Check if the screen of the phone is turned on or off
Check if GPS is enabled or not ( There is also a Live Google Maps on the right side, showing where the phone is right now )
Checks if the phone in call / calling / or getting called. ( in other words, it shows the user is busy with a phone conversation )
Checks if the user is browsing on the internet on the phone or not. ( It will check if a browser is open, needs more adjustments for more accurate readings )
I am surprised at the speed of the operations.
It takes a total of 3 to 4 seconds after clicking on "take a picture" button to take a picture from the front-camera and Upload it to my google drive.
It also removes the picture from my phone after it has been uploaded. WIth combination of SMS control this can be a great anti-theft option.
The "Record Audio" function works great too. after clicking on it on the control panel, it starts recording audio, waits 10 seconds ( records for 10 seconds ), stops recording audio and then uploads it to a special folder in my Google Drive.
The "Send SMS" function is very fast. after clicking on it, it will take about 1.5 seconds to send the SMS from your phone.
For now, the number to send the SMS to is hardcoded, but I will make it a variable so that it will be possible to type in the number on your web control panel and send the SMS to the number from your browser.
The "LOCK your phone" function immediately lock your phone remotely, even when your screen is turned off. You can unlock it with the code that has been set up in the Tasker Event.
Clicking on the Wifi, Bluetooth & GPS icon will toggle them( on / off )
Clicking on the Phone (screen) Icon, Will toggle the phone screen ( turns it on and off )
Clicking on the Clipboard icon will copy all the content to your own clipboard.
Not only the text but the icons also change dynamically.
Grey icons represent a false variable (turned off / dark / not in call & etc ) and the blue icons represent the true variables.
For example, in the screenshot above, Bluetooth is turned off and wifi is turned on.
When the battery gets at 15% or less, the icon will turn red and green when it's fully charged (100%) and the user will get an alert box warning with a notification sound straight from the browser about the low battery / full charge . ( Sound and notification can be turned off if you wish).
I have wrote a script with AJAX (Asynchronous JavasScript and XML) to do all of this in Real-time and without page-reloads. AJAX refreshes the page information every second (or whatever the user wants) without reloading the page.
The controls in this control panel are in many cases and in my experience a lot faster than Android Device Manager or other apps like Cerberus and Airdroid.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- On Tasker, I have used Taskers own variables but also created my own variables to be created/changed on certain triggers.
For example, when the lx level ( light sensor ) gets low, it will set a variable to "false" as boolean, meaning there is not enough light == it is dark.
- Next I use this variable in my HTTP POST Request URL to a very simple PHP script on my website I wrote..
The HTTP POST Request URL will post to my PHP Script.
My PHP script grabs the URL, strips certain parts of it, turns it into PHP variables and then sends it to my MySQL database ( all on my own hosting).
- I again use the wonderful Tasker to do all of this this every 2 seconds.
You can get (almost) real-time information about your phone if it's set to be updated every 1 second.
This will not be very heavy on the database so it's possible.
- I then made another webpage containing another simple PHP script that grabs all the variables ( those we saved in previous steps) from my Database and echo's (shows) it on the screen.
This is the very same page you see on the screenshot, This is the Control Panel.
In the last step, all we have to do is visit the webpage on my website.
It will show the control panel as seen in the screenshot. You will also be able to control your phone from here.
I am making a simple login function where users can login.
this means a single database can hold more than 1 user if you wish to.
This will also protect others to see/control your phone from the web as they will need login credentials.
My script will then grab the corresponding variables of your phone when you login, using your ID and checking it on my database.
I know this may sound complicated for a lot of you who think that this is too much work, but I am planning to finish this and make it a some kind of a Open-Source thing available to every android and (rooted) tasker user.
All you need is:
- My Tasker project files ( all you need to do is import it to your own Android )
- Your own webhosting with MySQL database and PHP.
There are TONS of FREE online webhosting that will offer exact this. I'd love to post all the links here, but i'm not sure if it will be seen as advertising, so let me know.
- My PHP script(s), all you need to is simply upload it to your own website.
- My MySQL database configuration file - After importing this single file, the whole database will be created automatically on your website. ( using MySQL on your hosting )
After that, and when my Login function is complete, you could create an account for your self and/or others where they can login from anywhere in the world, on any browser or device and check their phone status and control their phone in Real-Time.
Sicariux said:
Greetings everyone,
i63.tinypic.com/20jsimh.png
What you see above is a "Control Panel" for my own Galaxy S7 Edge. I host this on my own website.
This means it can be seen and accessed from anywhere in the world, on any browser and/or device.
For privacy and security, I will implement a login system in the near future.
It has a couple of neat features, but since they are written in Dutch I will translate them to English:
Information:
Check battery level/percentage and check if your phone is being charged or not
Warns the user from the control panel if the battery is low.
Warns the user from the control panel to pull out the plug out of charging when it is fully charged
Check if your phone is in a light or dark place. I have optimized the light sensor as best as I could, The results are pretty accurate
Clipboard of your current copied content on your phone
Shows the phone model and the date and time of the last update sent from your phone
Check if Bluetooth is enabled or not
Check if Wifi is enabled or not
Show the current WiFi name, Wifi Speed, Wifi Channel & Wifi Signal Strength
Show the current Data Carrier / Mobile Signal strength (Weak, Normal, Strong)
Shows the current Call Volume percentage
Shows the current Media Volume percentage
Check if the screen of the phone is turned on or off
Check if GPS is enabled or not ( There is also a Live Google Maps on the right side, showing where the phone is right now )
Checks if the phone in call / calling / or getting called. ( in other words, it shows the user is busy with a phone conversation )
if the user is browsing on the internet on the phone or not. ( It will check if a browser is open, needs more adjustments for more accurate readings )
I am surprised at the speed of the operations.
It takes a total of 3 to 4 seconds after clicking on "take a picture" button to take a picture from the front-camera and Upload it to my google drive.
It also removes the picture from my phone after it has been uploaded. WIth combination of SMS control this can be a great anti-theft option.
The "Record Audio" function works great too. after clicking on it on the control panel, it starts recording audio, waits 10 seconds ( records for 10 seconds ), stops recording audio and then uploads it to a special folder in my Google Drive.
The "Send SMS" function is very fast. after clicking on it, it will take about 1.5 seconds to send the SMS from your phone.
For now, the number to send the SMS to is hardcoded, but I will make it a variable so that it will be possible to type in the number on your web control panel and send the SMS to the number from your browser.
The "LOCK your phone" function immediately lock your phone remotely, even when your screen is turned off. You can unlock it with the code that has been set up in the Tasker Event.
Clicking on the Wifi, Bluetooth & GPS icon will toggle them( on / off )
Clicking on the Phone (screen) Icon, Will toggle the phone screen ( turns it on and off )
Clicking on the Clipboard icon will copy all the content to your own clipboard.
Not only the text but the icons also change dynamically.
Grey icons represent a false variable (turned off / dark / not in call & etc ) and the blue icons represent the true variables.
For example, in the screenshot above, Bluetooth is turned off and wifi is turned on.
When the battery gets at 15% or less, the icon will turn red and green when it's fully charged (100%) and the user will get an alert box warning with a notification sound straight from the browser about the low battery / full charge . ( Sound and notification can be turned off if you wish).
I have wrote a script with AJAX (Asynchronous JavasScript and XML) to do all of this in Real-time and without page-reloads. AJAX refreshes the page information every second (or whatever the user wants) without reloading the page.
The controls in this control panel are in many cases and in my experience a lot faster than Android Device Manager or other apps like Cerberus and Airdroid.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- On Tasker, I have used Taskers own variables but also created my own variables to be created/changed on certain triggers.
For example, when the lx level ( light sensor ) gets low, it will set a variable to "false" as boolean, meaning there is not enough light == it is dark.
- Next I use this variable in my HTTP POST Request URL to a very simple PHP script on my website I wrote..
The HTTP POST Request URL will post to my PHP Script.
My PHP script grabs the URL, strips certain parts of it, turns it into PHP variables and then sends it to my MySQL database ( all on my own hosting).
- I again use the wonderful Tasker to do all of this this every 2 seconds.
You can get (almost) real-time information about your phone if it's set to be updated every 1 second.
This will not be very heavy on the database so it's possible.
- I then made another webpage containing another simple PHP script that grabs all the variables ( those we saved in previous steps) from my Database and echo's (shows) it on the screen.
This is the very same page you see on the screenshot, This is the Control Panel.
In the last step, all we have to do is visit the webpage on my website.
It will show the control panel as seen in the screenshot. You will also be able to control your phone from here.
I am making a simple login function where users can login.
this means a single database can hold more than 1 user if you wish to.
This will also protect others to see/control your phone from the web as they will need login credentials.
My script will then grab the corresponding variables of your phone when you login, using your ID and checking it on my database.
I know this may sound complicated for a lot of you who think that this is too much work, but I am planning to finish this and make it a some kind of a Open-Source thing available to every android and (rooted) tasker user.
All you need is:
- My Tasker project files ( all you need to do is import it to your own Android )
- Your own webhosting with MySQL database and PHP.
There are TONS of FREE online webhosting that will offer exact this. I'd love to post all the links here, but i'm not sure if it will be seen as advertising, so let me know.
- My PHP script(s), all you need to is simply upload it to your own website.
- My MySQL database configuration file - After importing this single file, the whole database will be created automatically on your website. ( using MySQL on your hosting )
After that, and when my Login function is complete, you could create an account for your self and/or others where they can login from anywhere in the world, on any browser or device and check their phone status and control their phone in Real-Time.
Click to expand...
Click to collapse
It looks like a great project.
Checks if the user is browsing on the internet on the phone or not. ( It will check if a browser is open, needs more adjustments for more accurate readings )
Click to expand...
Click to collapse
What about checking the network traffic to know whether the user is browsing or not?
I know this may sound complicated for a lot of you who think that this is too much work, but I am planning to finish this and make it a some kind of a Open-Source thing available to every android and (rooted) tasker user.
Click to expand...
Click to collapse
Even Open Source? That rocks.
XDA's Tasker subforum isn't that popular. You might wanna post your project on reddit too, where the Tasker community is way bigger and more popular:
https://www.reddit.com/r/tasker/. Let us know if you'll post it there too.
I'm looking forward for this project. Personally, I don't think I would use this as I don't think I really need it (although it doesn't hurt to have an anti-theft), but I'd like to see how it is done, if you're gonna make it Open Source.
Good luck!
Hi and thanks for your reply!
What about checking the network traffic to know whether the user is browsing or not?
Click to expand...
Click to collapse
Do you mean any random network traffic? in that case, a simple incoming whatsapp message could trigger the browser variable and set it to "true".
I will try reddit ... I have tried posting it in the official Tasker forums, but the my post is still awaiting moderator approval after a long time.
Since i've posted this thread, I've created new functions already like video recording (microphone audio included) the phone screen for 10 seconds and upload it to google drive.
I haven't seen this option on any other anti-theft yet. In a case of emergency, you could literally watch the thief do things on your phone and also hear him talking.
Since it's going be to open-source, it's highly customizable. You could change the icons, add new functions, remove functions , change the styling to your own wishes and improve the "web app" overall.
For those interested, Since the first post, I've added more options and starts looking good
https://youtu.be/T9aKmLTujik
For rooted users, you could make an add-on app that the user puts in the /system partition and, in case of factory reset, installs Tasker and restores it's data.
That way, the user has a chance of finding their phone even if the thief performs a factory/hard reset.
EDIT: Are your files available? I can't seem to find them.
Vagelis1608 said:
For rooted users, you could make an add-on app that the user puts in the /system partition and, in case of factory reset, installs Tasker and restores it's data.
That way, the user has a chance of finding their phone even if the thief performs a factory/hard reset.
EDIT: Are your files available? I can't seem to find them.
Click to expand...
Click to collapse
With the new Android versions, this is not a reliable thing anymore. This is the same reason Cerberus App stopped offering a special APK that could be installed in the /system by flashing it.
Also, it would be very difficult to have an add-on app install Tasker, AutoRemote, FolderSync and other plugins it needs automatically and configure them too.
I haven't made my files available yet. I am still perfecting it and awaiting community tips and input to expand the app more before releasing the source-files.
Hello,
I'm going crazy here.... I've installed Tasker on my new Lenovo Tab M7 TB-7305F (7 Inch with Android 9.0 GO - NOT rooted). Tasker works fine. Since I want to kill apps I installed the plugin "SecureTask". And: I succeeded to get it working. Everyting is working fine. Until I reboot. After a reboot: When I try Tasker to execute the plugin-command SecureTask - Tasker waits long and can't execute the plugin. It seems Tasker can't call the plugin SecureTask / can't connect to it. When I manually load SecureTask (Icon on the desktop - only a config-screen comes up - I leave the config-screen with the back-button): After that everything works again. It seems: After SecureTask was loaded once everything is OK. But Tasker can't start the plugin.
Humpf? After a lot of hours of investigating..... I'm out of ideas. Any help?
That sounds like there's a problem getting a background process running after boot for SecureTask. Assuming that all of the permissions for SecureTask have been granted through ADB, I would contact the developer and see what he says.
A work around might be to use Tasker to launch SecureTask after boot. You could then use it to close itself
Thanks... exactly the opinion I have at the moment. In the meantime I found a contact address in SecureTask itself - so I will contact the developer.
Enabling SecureTask after boot by Tasker.... good idea That will be a screen-flickering... but that's at 5 am - so nobody will care about that. I will test this... :good:
Just to report my efforts.... I contacted the support of SecureTask - and got an email-chat within minutes. Incredible support - thank's a lot, John Doe (support of SecureTask)!!!
He told me how to get a logcat. Reason, why it's not working:
BroadcastQueue: TabletMaster Service: not allowed to launch app com.balda.securetask/10110 for broadcast Intent { act=com.twofortyfouram.locale.intent.action.FIRE_SETTING flg=0x14 cmp=com.balda.securetask/.receivers.FireReceiver (has extras) }
=> The OS is blocking the broadcast. No clue why. So it seems my Lenovo Tab M7 TB-7305F has a strange behaviour... no chance to get it working.
Btw: Killing SecureTask with it's own didn't work. So I had to choose now a complete different approach without SecureTask.
airplane mode
Hi, bit off topic maybe, but I saw that this is a quite recent threat and it is involved with SecureTask plugin, so I decided to hook up instead of creating new one
This week I bought Samsung Galaxy Tab S5e. It's operating on Android Pie and UI One interface. I'm reluctant to root it yet (all the more the procedure is not obvious), but I want to recreate as much functionality as possible from my old rooted Samsung tablet So SecureTask plugin is the obvious choice.
I'm trying to find a way to automate turning the airplane mode on/off. On my old tablet I created a profile that triggered airplane mode according the time schedule as soon as Tasker detects that the device is plugged in to a power source. I've tried to recreate this profile with the help of SecureTask. Of course in advance I granted to the plugin all possible permissions using adb and even successfully set it as the device owner. Then I found a secure setting responsible for turning the airplane mode on/off and set appropriate values. And when I test the created tasks, the green circle appears and the quick toggle in the notification drawer turns on, but it seems that the system doesn't listen to the call - the airplane mode actually doesn't turn on. The system seems to listen only when I turn the quick toggle on manually. So I wonder if there is something I'm missing or maybe it is not achievable at all without root on this firmware?
Would be grateful for any insight, maybe from you @ktmom, boss Thanks in advance.
@Lord Sithek, AFAIK, the only way you can toggle mobile data or WiFi radios is after a reboot and that may not work on all devices. Google "long ago" removed the ability to directly control those radios, even with root. Bluetooth does tend to toggle though.
So if it's going to work at all, you would have to toggle off and then reboot.
My opinion is its best to use touch emulations to activate the quick setting tile.
ktmom said:
@Lord Sithek, AFAIK, the only way you can toggle mobile data or WiFi radios is after a reboot and that may not work on all devices. Google "long ago" removed the ability to directly control those radios, even with root. Bluetooth does tend to toggle though.
So if it's going to work at all, you would have to toggle off and then reboot.
My opinion is its best to use touch emulations to activate the quick setting tile.
Click to expand...
Click to collapse
Ok, thanks for the response. I have Auto Input plug installed as well, so I'll give it a shot
ktmom said:
My opinion is its best to use touch emulations to activate the quick setting tile.
Click to expand...
Click to collapse
The problem is that it needs to turn the screen on. I keep my device in book cover so... pain in the arse :cyclops: I think I'll probably switch to "do not disturb" mode, at least it works right away
Sent from my mido using XDA Labs
Marienkaefer said:
Hello,
I'm going crazy here.... I've installed Tasker on my new Lenovo Tab M7 TB-7305F (7 Inch with Android 9.0 GO - NOT rooted).
Click to expand...
Click to collapse
I too just purchased a lenovo Tab M7 TB-7305F (7 Inch with Android 9.0 GO - also NOT rooted).
Sorry for intruding.
Have you found a forum for this tablet?
One specific question I have is with screen rotation. In android pie you get rotation control by turning off auto-rotation in settings. That way when you rotate the tablet a small icon appears briefly in a corner. When that icon is tapped the display rotates. If not tapped on the display does not rotate.
That is what happens in my other android pie devices. But for some reason this icon does not appear on this tab. So I'm looking for a forum for help. Have you found one?
Lord Sithek said:
Hi, bit off topic maybe, but I saw that this is a quite recent threat and it is involved with SecureTask plugin, so I decided to hook up instead of creating new one
This week I bought Samsung Galaxy Tab S5e. It's operating on Android Pie and UI One interface. I'm reluctant to root it yet (all the more the procedure is not obvious), but I want to recreate as much functionality as possible from my old rooted Samsung tablet So SecureTask plugin is the obvious choice.
I'm trying to find a way to automate turning the airplane mode on/off. On my old tablet I created a profile that triggered airplane mode according the time schedule as soon as Tasker detects that the device is plugged in to a power source. I've tried to recreate this profile with the help of SecureTask. Of course in advance I granted to the plugin all possible permissions using adb and even successfully set it as the device owner. Then I found a secure setting responsible for turning the airplane mode on/off and set appropriate values. And when I test the created tasks, the green circle appears and the quick toggle in the notification drawer turns on, but it seems that the system doesn't listen to the call - the airplane mode actually doesn't turn on. The system seems to listen only when I turn the quick toggle on manually. So I wonder if there is something I'm missing or maybe it is not achievable at all without root on this firmware?
Would be grateful for any insight, maybe from you @ktmom, boss Thanks in advance.
Click to expand...
Click to collapse
I don't know if it needs root (I am always rooted), but there is an Airplane Mode On and Off in Tasker, under Net category.
I have a task that checks if %AIR is on or off, and turn on and off accordingly.
---------- Post added at 04:33 PM ---------- Previous post was at 04:29 PM ----------
ktmom said:
@Lord Sithek, AFAIK, the only way you can toggle mobile data or WiFi radios is after a reboot and that may not work on all devices. Google "long ago" removed the ability to directly control those radios, even with root. Bluetooth does tend to toggle though.
So if it's going to work at all, you would have to toggle off and then reboot.
My opinion is its best to use touch emulations to activate the quick setting tile.
Click to expand...
Click to collapse
It still is fine to toggle mobile data on and off (in my case, either Mobile Data 1 or 2 due to having dual sims), as well as wifi, without rebooting. Even works in Macrodroid (the mini Tasker-like app)
Android app Tasker
Motorola launches new Moto Secure App to give consumers more peace of mind
We know data privacy matters to our consumers. That’s why we have ThinkShield, an ex
motorolanews.com
Hopefully this new app will rollout to all 2022 Moto devices as well.
1. Add an extra layer of protection to sensitive information and apps by hiding select apps and files in Secure Folder, protected by a specific PIN. With Secure Folder, you also have the option to enable Disguised Mode allowing you to select from four icons and name options, rather than visibly displaying apps within a folder, for even more privacy. This is especially helpful for disguising more sensitive information like financial apps, digital wallets, shopping apps, or email accounts behind a discrete icon and label.
2. Whether you’re on the go or working from a public location, minimize risks when connecting to public Wi-Fi and cellular networks with the Network Protection feature. By enabling Network Protection you will automatically be notified when a hotspot or Wi-Fi-related security issue is detected. Within network protection, you can also stop specific apps from using open connections and prevent spoofing by blocking 2G connections.
3. Lock Screen Security allows you to see and control all of your lock screen options to configure the protection you need. This includes the ability to lock network and security functions. For example, previously, a thief could simply turn off your mobile network or Wi-Fi, preventing you from locating your lost device. Now, by enabling this feature, you can stay in control and eliminate the ability for someone to turn off your mobile network or Wi-Fi on your device without unlocking the phone.
4. PIN Pad Scramble shuffles the numerical layout of your entry screen, so you can unlock your device without the risk of prying eyes memorizing the pattern of the numbers you press.
5. The Privacy Dashboard gives you a clear and comprehensive view of which apps have accessed your calendar, contacts, files, camera, microphone and location during the past 24 hours. If you see anything that you’re not comfortable with, you can manage app permissions, update security settings, and change privacy controls right from the Moto Secure App.
ijuanp03 said:
Privacy Dashboard
Click to expand...
Click to collapse
Privacy dashboard is going to be the best feature of the new secure app.
I would like the apk of this app, could anyone provide a link?
Could someone put this APK here for us to test on Android 12?
Haven't seen it around, i'd like from official source.