After reading many things on internet i try HCU Client from DC unlocker and successfully unlock my bootloader.
I buy 4 credits on the site (1 credit = 1 euro) =, after that i install the drivers, download the update of client, put the phone in manufacture mode and a little pray, finally get a unlock code.
I just go to Tool all in one and try the code and finally unlock the Mate 10 Pro.
Congratz. Which firmware version?
Sent from my BLA-L29 using Tapatalk
alixra said:
Congratz. Which firmware version?
Sent from my BLA-L29 using Tapatalk
Click to expand...
Click to collapse
BLA-L09 8.0.0.136(C25)
I want to go to C432.
so the tool worked on your phone even though u have android 8 ???
optiplex2012 said:
so the tool worked on your phone even though u have android 8 ???
Click to expand...
Click to collapse
I was worried about that but it works.
optiplex2012 said:
so the tool worked on your phone even though u have android 8 ???
Click to expand...
Click to collapse
HackDSL said:
I was worried about that but it works.
Click to expand...
Click to collapse
It's fine on Android 8, BUT it was patched in firmware starting June (some later). For example, on C432 it stopped working as of B145. B145 can be downgraded to B142 where it does work. B146 and later can not be downgraded.
For Mate 9 it's still working on latest Oreo.
ante0 said:
It's fine on Android 8, BUT it was patched in firmware starting June (some later). For example, on C432 it stopped working as of B145. B145 can be downgraded to B142 where it does work. B146 and later can not be downgraded.
For Mate 9 it's still working on latest Oreo.
Click to expand...
Click to collapse
ok i see, its because im above 145, thats why its not working
so i need to downgrade to 142 ???
how do i do it ? with FH its possible ???
optiplex2012 said:
ok i see, its because im above 145, thats why its not working
so i need to downgrade to 142 ???
how do i do it ? with FH its possible ???
Click to expand...
Click to collapse
If you're on C432B146 or later you can't downgrade due to new bootloader.
ante0 said:
If you're on C432B146 or later you can't downgrade due to new bootloader.
Click to expand...
Click to collapse
i see, ok thx alot
HackDSL said:
BLA-L09 8.0.0.136(C25)
I want to go to C432.
Click to expand...
Click to collapse
Please let us know if you succeed and which procedure you followed. Thanks!
rickylambert said:
Please let us know if you succeed and which procedure you followed. Thanks!
Click to expand...
Click to collapse
And finally works with new firmware and rebrand the phone from C25 (Claro Latin-america) to C432.
I used a guide from this site.
http://www.androidiani.com/forum/mo...-guida-aggiornamento-rebrand-magisk-root.html
And this is from here but the guide from the site it was more easy to follow.
I don't even understand the language of the guide but with google translator of chrome it was not a problem.
I was getting to many troubles with windows 10.
I got a second laptop and installed Windows 7 and everything works like a charm.
I use the drivers from DC-Unlocker for the Windows 7 and don't install the Hisuite.
Then for do everything I used the HWOTA8_Mate10
The firmware I used to apply to my phone came from here.
http://huawei-firmware.com/phone-list/huawei-mate-10-pro
And this is my phone now...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Omg I did it last last night aswell, rebranded it from version bla_l09 132 (768) up To bla_l09 156 (c432)
Succeeded rebranding C782B132 -> C432B156.
No issues on Windows 10 using latest Hisuite drivers and HWOTA8(Hisuite closed during process) and no need to apply OTA twice. Butter smooth!
I think this is the beta for L09 C432 of pie
http://huawei-firmware.com/rom/huawei-mate-10-pro/bla-l09/25024
Hi all,
Just got a BLA-L09 8.0.0.134(C34) and I'm keen to jump in here..
Can anyone point me in the direction / get a breakdown of each of the ROMs?
Really keen to get back to as stock as possible.
L09 choices as attached. Which one is stock? Is there a stock for a L09?
I note LOTS of choices at http://huawei-firmware.com/phone-list/huawei-mate-10-pro
Thanks in advance..
henrysinn said:
Hi all,
Just got a BLA-L09 8.0.0.134(C34) and I'm keen to jump in here..
Can anyone point me in the direction / get a breakdown of each of the ROMs?
Really keen to get back to as stock as possible.
L09 choices as attached. Which one is stock? Is there a stock for a L09?
I note LOTS of choices at http://huawei-firmware.com/phone-list/huawei-mate-10-pro
Thanks in advance..
Click to expand...
Click to collapse
Hi, some of us have already rebranded to L09C432(EU unbranded) to get the latest Huawei updates. Latest official non-beta version is 8.0.0.156. However, be aware that rebranding takes a little work and risk, of course.
rickylambert said:
Hi, some of us have already rebranded to L09C432(EU unbranded) to get the latest Huawei updates. Latest official non-beta version is 8.0.0.156. However, be aware that rebranding takes a little work and risk, of course.
Click to expand...
Click to collapse
Thanks
Hoping to get basic, unbranded English firmware of any sort.
Thoughts?
Just had success getting unlock CODE via HCU client on Win7 (Fail on Win10)
Currently stuck with the unlock (using Tool All In One). Error in command window is: FAILED <remote: 'Command not allowed'>
Will have another crack tomorrow. Late here down under
henrysinn said:
Thanks
Hoping to get basic, unbranded English firmware of any sort.
Thoughts?
Just had success getting unlock CODE via HCU client on Win7 (Fail on Win10)
Currently stuck with the unlock (using Tool All In One). Error in command window is: FAILED <remote: 'Command not allowed'>
Will have another crack tomorrow. Late here down under
Click to expand...
Click to collapse
Did you install latest drivers and checked ADB/Fastboot are working? Unlocking via AIO is usually straightforward.
I'm currently running BLA-L29 8.0.0.143 (C636patch01) I have the dual sim Mate 10 Pro. What software version should I be on? See that you guys are using BLA-L09 which I believe is a single sim. Isn't that for different hardware than my version?
I no longer have a windows 7 device. Will it work on windows 10 with the compatibility modes?
Related
Hello everyone. I recently bought P9 but the battery life is really awfull. I was wondering which firware version is the best for battery life or is it all the same? I'm from Croatia. Here is my current one (also I don't have any updates available)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my EVA-L09 using Tapatalk
try this app from store : FF here
with this you maybe can update your phone!
and, about battery life, its much better in nuget than marshmalow. but for me at b182 it wasnt so bad, but in b360 its way better.
The battery life of my P9 is outstanding!
Sent from my EVA-L09 using Tapatalk
Okay I tried the app, I see a list of firmwares. Do I have to be rooted, unclocked bootloader or is it safe to download and install it?
@Craig_D Which version are you on?
brchina said:
Do I have to be rooted, unclocked bootloader or is it safe to download and install it?
Click to expand...
Click to collapse
Don't need to be rooted or unlocked. can't say if its safe, but there nothing bad hapen to my phone. If update fails, it boot in where you was.
brchina said:
Okay I tried the app, I see a list of firmwares. Do I have to be rooted, unclocked bootloader or is it safe to download and install it?
@Craig_D Which version are you on?
Click to expand...
Click to collapse
I'm on B182. Contemplating jumping into N
Sent from my EVA-L09 using Tapatalk
Craig_D said:
I'm on B182. Contemplating jumping into N
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
Did you update through OTA or via Firmware Finder?
brchina said:
Did you update through OTA or via Firmware Finder?
Click to expand...
Click to collapse
I've just Unlocked my bootloader/Installed TWRP/Rooted then followed this guide.....
https://www.huaweiblog.de/software/android/marshmallow/huawei-p9-firmwareupdate-b182-leak/
Now, I then used Firmware Finder and downloaded B361
Is there a way to unlock bootloader without dc-unlocker? I don't find it hard to root and instal custom recovery there are guides here but I'm not sure about bootloader. How did you unlock it? Thanks for replying.
brchina said:
Is there a way to unlock bootloader without dc-unlocker? I don't find it hard to root and instal custom recovery there are guides here but I'm not sure about bootloader. How did you unlock it? Thanks for replying.
Click to expand...
Click to collapse
Just ask Huawei, they gave me mine within a day or so via email....
[email protected]
The code they gave me matched the code I acquired using Bootloader unlocking tool I downloaded online so I knew it was safe. I carried all the work out using droidth's SRK tool
Sent from my EVA-L09 using Tapatalk
Thank you. I requested Huawei via e-mail. I screenshotted "About phone". Hope that is enough.
brchina said:
Is there a way to unlock bootloader without dc-unlocker? I don't find it hard to root and instal custom recovery there are guides here but I'm not sure about bootloader. How did you unlock it? Thanks for replying.
Click to expand...
Click to collapse
you can get unlock code here : http://emui.huawei.com/en/plugin/hwdownload/download under unlock bootloader.
or, you can try using hisuite to upgrade to nuget without unlocking bootloader. No need it, no need root, no need twrp.. I upgradet my eva-l19c432b182 sucefuly to b360.
you need hisuite
you need firware updater
custom room name is EVA-L09C150B360
custom url : http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v72998/f1/
or: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v72998/f2/
duno what difference from f2 and f1. But if it not for your phone, upgrade will fail, but your phone will boot where it was before.
ps. if you try, dont just copy text, copy url as url, kuz its not showing full text whats in url, there in mid are dots, forum are made urls shorter
http:// update.hicloud .com:8180/TDS/d...104/v72998/f1/ realy are http:// update.hicloud.c om:8180/ TDS/data/ files/p3/s15/G1079/ g104/v72998/f1/
Craig_D said:
I've just Unlocked my bootloader/Installed TWRP/Rooted then followed this guide.....
https://www.huaweiblog.de/software/android/marshmallow/huawei-p9-firmwareupdate-b182-leak/
Now, I then used Firmware Finder and downloaded B361
Click to expand...
Click to collapse
Hi,
could you successfully install B361 on B182?
I am currently on B182 and used firmware finder app on my P9 to download B361. After unzipping I put UPDATE.app into dload folder on SD card and started installation. The update process always stops at 40%. I am not able to install B361 provided via firware finder. Do you face the same issues?
Thx,
morro23 said:
Hi,
could you successfully install B361 on B182?
I am currently on B182 and used firmware finder app on my P9 to download B361. After unzipping I put UPDATE.app into dload folder on SD card and started installation. The update process always stops at 40%. I am not able to install B361 provided via firware finder. Do you face the same issues?
Thx,
Click to expand...
Click to collapse
I have the same problem......
Just read this (post #11)..........
https://r.tapatalk.com/shareLink?ur...share_tid=3537232&share_fid=3793&share_type=t
Eva-l09c432b361
Sent from my EVA-L09 using Tapatalk
Craig_D said:
I have the same problem......
Just read this (post #11)..........
https://r.tapatalk.com/shareLink?ur...share_tid=3537232&share_fid=3793&share_type=t
Eva-l09c432b361
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
Wow, that does not read like a straight forward solution I think I will wait until it is again officially available....
morro23 said:
Wow, that does not read like a straight forward solution [emoji14] I think I will wait until it is again officially available....
Click to expand...
Click to collapse
My sentiments too
Sent from my EVA-L09 using Tapatalk
Hello, im having issues with updating the firmware of my phone to a later version.
Current version is PRA-LX1C02B139, but after installing the new PRA-LX1C02B140 version, phone restarts and deletes the downloaded files, and stays at PRA-LX1C02B139.
Im a complete newbie to this, first "real" smartphone I ever got. Id like to avoid rooting, at least until my warranty is voided.
EDIT
The B140 update just rolled out, im expecting the rest to come out soon, and this one works
I have a problem too , i have middle east version i downloaded from carbon tesla b125 update ( im on b120 ) and i tryed to flash it, lt failed but when i reboot it gives me error msg that vérification has failed and choose to continue booting or going to recovery, hopefully its not a bootloop the phone works but every time i reboot i get that msg and it sucks i hate it lol
i've got my p8 lite 2017 today, and i've got the same problem, there's an update, but it does not install ... i've downloaded it completely, rebooted my phone ecc.
but the update ist not installed at all
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xpatze85x said:
i've got my p8 lite 2017 today, and i've got the same problem, there's an update, but it does not install ... i've downloaded it completely, rebooted my phone ecc.
but the update ist not installed at all
Click to expand...
Click to collapse
From the app firmware finder ?
I think its better to not use it any more and wait for ota update :/
AmINoS007 said:
From the app firmware finder ?
I think its better to not use it any more and wait for ota update :/
Click to expand...
Click to collapse
I can answer, because the same happens to me .
From the settings menu, there is an update to the PRA-LX1C02B140 version.
You can download and update, but after restarting the phone, the current version of the phone is always PRA-LX1C02B139.
Mine is a brand Vodafone Italy.
The phone works perfectly, but it's annoying.
Greetings
hi, we can't upgrade with downloaded package like before....
The downloaded package can only be used to uncompress some files (like boot.img) but, not for restoring the firmware.
It seems that Huawei (or nougat related) introduce a validation while installing new firmware (wich is done when you make an OTA but not while using 3 buttons methods)
So maybe someone will discover something but for now, we have to live with OTA update.....
Hi there, I'm having exactly the same issue and I have a Vodafone Italy unit too. Additionally the phone keeps notifying me about the new version, which is really annoying. Any solutions?
guys I tryed to boot on the fastboot mod and it says bootloader unlocked FRP locked , what the hell ??? does that mean my bootloader is unlocked ? my phone is new and I never tryed to unlock the bootloader, can any one try please and tell if he get the same result ??
MisterBlack83 said:
Hello, im having issues with updating the firmware of my phone to a later version.
Current version is PRA-LX1C02B139, but after installing the new PRA-LX1C02B140 version, phone restarts and deletes the downloaded files, and stays at PRA-LX1C02B139.
Im a complete newbie to this, first "real" smartphone I ever got. Id like to avoid rooting, at least until my warranty is voided.
Click to expand...
Click to collapse
Same problem here! Any solution?
I have a solution... You need to make the update while having an Vodafone SIM card inside the phone...
Worked in my case, seems each operator might have slighty diferent updates.
paulofcardoso said:
I have a solution... You need to make the update while having an Vodafone SIM card inside the phone...
Worked in my case, seems each operator might have slighty diferent updates.
Click to expand...
Click to collapse
I only have a Tim Sim.... Now i try without Sim.
Sorry for my bad English
---------- Post added at 01:14 PM ---------- Previous post was at 01:08 PM ----------
VolvoFh said:
I only have a Tim Sim.... Now i try without Sim.
Sorry for my bad English
Click to expand...
Click to collapse
Don't work
paulofcardoso said:
I have a solution... You need to make the update while having an Vodafone SIM card inside the phone...
Worked in my case, seems each operator might have slighty diferent updates.
Click to expand...
Click to collapse
ok, this sucks ... i've got a 3 simcard, and i don't want to get a vodafone one just to be able to mage updates -_-
Thank you, we are aware of the mistake and we are working to remedy the problem. A greeting.
Click to expand...
Click to collapse
From Huawei Italy's Facebook chat.
nevernat_theoriginal said:
From Huawei Italy's Facebook chat.
Click to expand...
Click to collapse
Any chance you can ask for a worldwide fix? Bosnia and Herzegovina's Huawei team is a bunch of kids who fix everything by turning it off and on again..
nevernat_theoriginal said:
From Huawei Italy's Facebook chat.
Click to expand...
Click to collapse
cool! i've contacted huawei germany and vodafone germany a few days ago, they told me that they don't know anything about this problem
the problem seems to be resolved!
yesterday i got a new update to PRA-LX1C02B140, and afterwards to PRA-LX1C02B142!
xpatze85x said:
the problem seems to be resolved!
yesterday i got a new update to PRA-LX1C02B140, and afterwards to PRA-LX1C02B142!
Click to expand...
Click to collapse
Well, mine isnt yet. Now it wont even find the B140 at all, just says that im up to date with B139
I have the same problem, i have pra-lx1c432b106 but firmware finder shows me software version till c432b129, i tried to install every single one but none of them worked
MisterBlack83 said:
Well, mine isnt yet. Now it wont even find the B140 at all, just says that im up to date with B139
Click to expand...
Click to collapse
from what i know it depends from your imei when huaei pushes updates
but it should only take a few days until you're getting the update as well
Hi all. I have a simple question. Why in my p8 lite 2017 version, the part of the system called firmware occupy nearly 7Gb of internal storage? Thank you
This is the Huawei Mate 10 Pro 's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Install APKs
Uninstall APKs
Take a Screenshot
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Thx. Will test it out next week.
It looks so great! .. going to test later, thanks!
Tested on Huawei Mate 10 Pro bla-l29
mauronofrio said:
Tested on Huawei Mate 10 Pro bla-l29
Click to expand...
Click to collapse
Mate 10 non pro work too??
orbital_71 said:
Mate 10 non pro work too??
Click to expand...
Click to collapse
Not tested on it
can this be used to rebrand? flash bla-l29 to a09 for example?
minieod said:
can this be used to rebrand? flash bla-l29 to a09 for example?
Click to expand...
Click to collapse
No at this moment
mauronofrio said:
No at this moment
Click to expand...
Click to collapse
Do you have any estimate of when this would happen, or not going to?
minieod said:
Do you have any estimate of when this would happen, or not going to?
Click to expand...
Click to collapse
I'm studying huawei devices to understand how makes something good for the community. At this moment i made a new alghoritm to understand if the bootloader is locked or unlocked. I have not a huawei device so i'm testing on with a friend with a mate 10 pro, so i need time
mauronofrio said:
I'm studying huawei devices to understand how makes something good for the community. At this moment i made a new alghoritm to understand if the bootloader is locked or unlocked. I have not a huawei device so i'm testing on with a friend with a mate 10 pro, so i need time
Click to expand...
Click to collapse
Sounds good to me. I'm hoping there's a way to not have to use funkyhuawei and avoid paying for services all other devices usually have with no cost.
Seems like you're on the right track.
Request for Huawei Mate 9 & 10 Support ~)
@mauronofrio
This is my small contribution to your well going project.
Keep it up. :good:
Hope more devices support coming in next future.
Confirmation number: 9F421511912117937
People here who are looking this thread, my humble request to support developer for live and invention.
Nothing is free in this world except AIR.
Thanks,
goldybewon
Huawei Mate - 9
Huawei Mate - X (Going to buy)
goldybewon said:
@mauronofrio
This is my small contribution to your well going project.
Keep it up. :good:
Hope more devices support coming in next future.
Confirmation number: 9F421511912117937
People here who are looking this thread, my humble request to support developer for live and invention.
Nothing is free in this world except AIR.
Thanks,
goldybewon
Huawei Mate - 9
Huawei Mate - X (Going to buy)
Click to expand...
Click to collapse
Really thanks for your donation, I will do my best to make this tool as complete as possible, but without testers for the devices i can't do much. At this moment i have not a huawei device so i'm making all with that i'm reading on various site. It will take time
goldybewon said:
@mauronofrio
This is my small contribution to your well going project.
Keep it up. :good:
Hope more devices support coming in next future.
Confirmation number: 9F421511912117937
People here who are looking this thread, my humble request to support developer for live and invention.
Nothing is free in this world except AIR.
Thanks,
goldybewon
Huawei Mate - 9
Huawei Mate - X (Going to buy)
Click to expand...
Click to collapse
Xda tomorrow doesn't save posts
New Update available.
I have introduced a new alghoritm to check the bootloader status for Huawei Mate 10 Pro and now the "Lock" bootloader option will help you to relock the bootloader.
mauronofrio said:
New Update available.
I have introduced a new alghoritm to check the bootloader status for Huawei Mate 10 Pro and now the "Lock" bootloader option will help you to relock the bootloader.
Click to expand...
Click to collapse
So this tool you can use to unlock bootloader without going through the whole Huawei code stuff?
minieod said:
So this tool you can use to unlock bootloader without going through the whole Huawei code stuff?
Click to expand...
Click to collapse
You need of Huawei code, then open the tool and easy unlock the phone with that.
mauronofrio said:
New Update available.
I have introduced a new alghoritm to check the bootloader status for Huawei Mate 10 Pro and now the "Lock" bootloader option will help you to relock the bootloader.
Click to expand...
Click to collapse
As I told you on the original thread, the big issue is to lock the bootloader, not relock. I am looking forward to the solution.
badmania98 said:
As I told you on the original thread, the big issue is to lock the bootloader, not relock. I am looking forward to the solution.
Click to expand...
Click to collapse
I understood that, but i need time to find how to do that. For the moment all in that seems work
badmania98 said:
As I told you on the original thread, the big issue is to lock the bootloader, not relock. I am looking forward to the solution.
Click to expand...
Click to collapse
Yes, that would be a big hit if mauronofrio could get that working!
Just noticed that there's a new version available. Has anybody been able to download it?
I have tried, but without success.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3991/g1755/v243403/f1/full/changelog.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3991/g1755/v243403/f1/full/changelog.xml
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have downloaded it. Asap i will try to install
wetito said:
I have downloaded it. Asap i will try to install
Click to expand...
Click to collapse
Can you share how did you do it?
You had to use firmware finder for pc
wetito said:
You had to use firmware finder for pc
Click to expand...
Click to collapse
What is ur phone varient? did u manage to update ur phone? what are the new features?
How to install it. I already downloaded it
Don't try to install it, it's a Chinese only version. It's the quickest way to brick your device.
hacktrix2006 said:
Don't try to install it, it's a Chinese only version. It's the quickest way to brick your device.
Click to expand...
Click to collapse
It's not the truth
wetito said:
It's not the truth
Click to expand...
Click to collapse
The Beta is normally sent to China based users or India, Yes it shows up on FF however if you ran a check it states its no ready for the phone just like B144 does currently, I am glad your running Android 9.0 EMUI 9.1 on your phone however you took a risk and a very big one at that.
Hence my statement above as so other don't go nuts and then come on here like it has been recently with "I have bricked my Honor 9 Lite HEELLLLLLLLLPPPPPPPPPP!".
If and when its offered via FF as safe or via the Honor Beta FTA will i even think about installing it.
Also another thing, if you hate EMUI 9.1, how are you going to roll back your device it needs a special firmware (Which yes does show on FF i know, but its the Chinese firmware yet again).
So rather coming out and going its not the truth maybe think why it was said in the first place!
The official beta is available via the Huawei beta app
vayavalla said:
The official beta is available via the Huawei beta app
Click to expand...
Click to collapse
Not to everyone though. That's my point. Each country has different frequencies for the modem etc. Hence what I was saying above.
Sent from my LLD-L31 using Tapatalk
hacktrix2006 said:
Not to everyone though. That's my point. Each country has different frequencies for the modem etc. Hence what I was saying above.
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
Of course. That's a beta also. Whoever wants to try it, must know that is not for everyone.
get official update who has updated with hurupdater from oreo to foot from twrp?
my revision is LLD-LGRP2-OVS 9.1.106 (log)
As of 24 June 2019, there are issues with EMUI 9 update(Build number:9.1.0.112)
Issues:
Wifi connectivity issue.
Performance issue.
Now you have to hold the power button for 7 seconds for the power menu to pop up.
More bloatwares and background services.
Frank_70 said:
get official update who has updated with hurupdater from oreo to foot from twrp?
my revision is LLD-LGRP2-OVS 9.1.106 (log)
Click to expand...
Click to collapse
Congrats you have killed any chance of going back to EMU 8.0 Android 8 lol.
Sent from my LLD-L31 using Tapatalk
My sim free UK Honor 9 lite has just (25.06.19) "over night" updated to EMUI 9.1.0, build 9.1.0.117(C432E4R1P3). so the updates are coming guys.
CarsnGadgets said:
My sim free UK Honor 9 lite has just (25.06.19) "over night" updated to EMUI 9.1.0, build 9.1.0.117(C432E4R1P3). so the updates are coming guys.
Click to expand...
Click to collapse
I am on same build as well, got it last week and I am in UK on simfree too.
Sent from my LLD-L31 using Tapatalk
hacktrix2006 said:
I am on same build as well, got it last week and I am in UK on simfree too.
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
I got the same build this week
Just got Pie and EMUI9.1 in Czech Republic
edit: I running without FR three days and so far no problems... didnt have time.
Sent from my Samsung SM-G973F using XDA Labs
rmn.br said:
Just got Pie and EMUI9.1 in Czech Republic
Click to expand...
Click to collapse
I got the same build about two weeks ago. My phone started acting weird after updating to pie.
It started rebooting itself and stuff like that. I hope they fix this on upcoming updates though.
This is the OnePlus 7 Pro's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Will this work with the T-Mobile version as well or only international?
Can anyone verify that this works on any model? I haven't seen anyone talking about it working, specifically, for the One Plus 7 Pro on the original thread.
I'm hoping for this bootloader unlocking method to come to the 7 pro, seems to work for the 6t without issue for T-Mobile users that are not Sim unlocked.
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
I'm just looking forward to the geniuses that were able to make it so I could convert my 6T to international version to do the same for the 7 Pro, since i'm getting my 7 Pro in about 8 hrs.
SmileBigNow said:
Will this work with the T-Mobile version as well or only international?
Click to expand...
Click to collapse
Purest said:
I'm hoping for this bootloader unlocking method to come to the 7 pro, seems to work for the 6t without issue for T-Mobile users that are not Sim unlocked.
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Click to expand...
Click to collapse
Hi, actually i have not included the branded bootloader unlock method that i already added for oneplus 6t, i want to see someone do it manually before add it
qwasz123 said:
Can anyone verify that this works on any model? I haven't seen anyone talking about it working, specifically, for the One Plus 7 Pro on the original thread.
Click to expand...
Click to collapse
I added the support yesterday, obviously no more people have the oneplus 7/7 pro so we need a bit of time to see if it works or not.
In all cases i made this tool for all older OnePlus devices, so if there will be problems i will update the tool fast
mauronofrio said:
Hi, actually i have not included the branded bootloader unlock method that i already added for oneplus 6t, i want to see someone do it manually before add it
I added the support yesterday, obviously no more people have the oneplus 7/7 pro so we need a bit of time to see if it works or not.
In all cases i made this tool for all older OnePlus devices, so if there will be problems i will update the tool fast
Click to expand...
Click to collapse
Thanks for the quick reply! I'll have to try unlocking the bootloader and rooting later today. Hopefully it'll all go well
qwasz123 said:
Thanks for the quick reply! I'll have to try unlocking the bootloader and rooting later today. Hopefully it'll all go well
Click to expand...
Click to collapse
The root option is connected to the twrp, so without a twrp you can't root with the tool. Let me know if you will be able to unlock the bootloader without problems. I'm waiting a stock rom to start working on the twrp
This looks like a great tool. I'm new to OnePlus so this should make it streamlined for me. Really looking forward to getting hooked on flashing again after several years with Samsung. I got the international OP7P this morning right when orders went live. I have a feeling that this community for the 7 pro is going to be massive.
I dont know the steps but if you guide me in the right direction I will give it a try.
mauronofrio said:
Hi, actually i have not included the branded bootloader unlock method that i already added for oneplus 6t, i want to see someone do it manually before add it
I added the support yesterday, obviously no more people have the oneplus 7/7 pro so we need a bit of time to see if it works or not.
In all cases i made this tool for all older OnePlus devices, so if there will be problems i will update the tool fast
Click to expand...
Click to collapse
Purest said:
I dont know the steps but if you guide me in the right direction I will give it a try.
Click to expand...
Click to collapse
What do you want to do?
mauronofrio said:
What do you want to do?
Click to expand...
Click to collapse
Rebrand without being sim unlocked from t-mobile.
Purest said:
Rebrand without being sim unlocked from t-mobile.
Click to expand...
Click to collapse
you need to wait that the stock rom is released
mauronofrio said:
you need to wait that the stock rom is released
Click to expand...
Click to collapse
Thanks, well when it does I would gladly be a tester if you need one.
@mauronofrio, stoked to see you interested in this device. Been using your work on 6t. Bodes well for the development of the 7pro
after how the 6t was unlocked, I'm definitely hoping the 7 pro I just picked up will be capable of the same
I can't activate OEM UNLOCK developer options so the tool all in one doesn't seem to work it recognises the phone though ??
mauronofrio said:
you need to wait that the stock rom is released
Click to expand...
Click to collapse
And now it is! I'd be happy to test as well.
Sent from my GM1915 using Tapatalk
Can you make the fastboot rom please
BlazingKahn35 said:
Can you make the fastboot rom please
Click to expand...
Click to collapse
Yes i'm uploading it now