Database Develop

[Q] I messed up my girlfriend’s GalaxyS ….

Pleaseeee help ….. I am stuck in the downloading mode
Dear experts
I have messed up my girlfriend’s GalaxyS ….
I rooted her phone by following ChainFire’s thread http://forum.xda-developers.com/showthread.php?t=1056334
Followed every step and rooted phone ….Things went smooth…then suddenly phone keep dying in few hours even if its fully charged …. I thought of reapeting the whole process incase I made mistake at any stage
I run the Odin v1.85, selected “CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.tar” file in PDA and click on start…..Suddenly my phone died and Odin said successful 0/ Failed 1
I got in panic mode and start the whole process again…. Since then phone is in Downloading mode.....
Then Magic happen and i got following msg frm Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/004> Added!!
Then as per instruction after phone get rebooted i run superoneclick and click on Root... Its been almost 2 hours and i am having following msg on superoneclick...
Running psneuter....
Pleaseeeeeeeeeeeeeeeeeeeeeeee help me to get it up & running
Waiting for experts to save my relationship
Pleaseeeee help me guys
What to do next?

If you flash cf root kernel you will get root.You don't need superone click.
Try reboot your phone it should work.
Sent from Galaxy on latest nightly with neo kernel

First of all... what was the original firmware?
Second: I hope you have not messed with repartition and bootloader?

yeah, check what version she's running and flash cf-root, since you allready are capable of flashing with Odin you dont need one-click root.
Sent from my GT-I9000 using XDA App

Dear all,
Many Many thanks for your time & reply...
I did reboot at least 3 times... Still having same problem... very strange problem
I have fully charge the phone. Everything is working fine, did my msgs, reply to email, took few pics...upload them....SO far so good, happy happy happyy so put the phone on side & had dinner, picked up phone again and it was off...have to press power button long enough to start the phone... Works fine, shows little drain on battery..put it aside for while and it will be off strangely... Have to restart it by pressing power button on for long enough and it does start, work well and once put it on side for while it goes off .... (My girlfriend is mad at me ;-p ... Dont know how to solve this )
Please help guys ... Here is the required details...
Original-->
Firmware 2.3.3
Kernel 2.6.35.7 I9000xxJV0-CL182937
Build number Gingerbread.XXJVO
Does this info will help you to find the fault?
Really need help...
Many Thanks

Reflash the stock rom again just to be on the safe side.

My Note after upgrading to ics gets no audio on calls

Hi All,
I have been trying to find an answer for the past 6 hours, my baseband is n7000xxlp1, kernal is [email protected] #3 and build is IML74k my phone works great the problem is when i make or receive calls I have no audio and the person on the other end gets static. Im thinking it is a radio issue though I cant make heads or tails of which radio to flash. Sorry for being newbish but could someone please help me and let me know how to fix this ?
Thanks so much.

blo0kid said:
Hi All,
I have been trying to find an answer for the past 6 hours, my baseband is n7000xxlp1, kernal is [email protected] #3 and build is IML74k my phone works great the problem is when i make or receive calls I have no audio and the person on the other end gets static. Im thinking it is a radio issue though I cant make heads or tails of which radio to flash. Sorry for being newbish but could someone please help me and let me know how to fix this ?
Thanks so much.
Click to expand...
Click to collapse
Try flashing baseband lp6

Will do any leads where i can find the lp6 baseband searching is not helping me out.
Thanks in advance

Here's the latest LP6 modem: http://forum.xda-developers.com/showpost.php?p=24787908&postcount=309 Just flash with CWM Recovery.
But why not flash a LP6 based rom? Like AlBa or TheMIDTeam's B&G?

The ICS update id did is the hacked 4.03 one via odin I had root on the phone before doing it. The guide i followed is www . androidaddicted . com / samsung-3/how-to-upgrade-samsung-galaxy-note-gt-n7000-to-ice-cream-sandwich-ics-4-0-3-n7000xxlp1-411.html so i dont have CWM on it only download mode, should i reflash to a stock 2.3.6 rom ? If so I have no idea where this phone is from (region wise) is there a way to tell so i flash the correct stock rom?
Thanks.

I just tried to flash the LP6 modem in odin and get
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
???

blo0kid said:
I just tried to flash the LP6 modem in odin and get
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004>
<ID:0/004> Receive Response form LOKE
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
???
Click to expand...
Click to collapse
Dontflsh via Odin flash via cwm recovery

I dont have CWM only odin on the phone, when i turn it on with vol down i get download mode, if i turn it on with vol up and the center button i get android system recovery, can i rename the modem file something where it will work with the apply update from external storage option ?

I put the modem zip on a microsd and tried to use android recovery to flash and it says signature verification failed

So i just downgraded to 2.3.6 and will properly root and install CWM on it and then do the ics install thanks, 2.3.6 works like a champ with the phone calls.

Yeah, then it's definately the modem file that messes things up.
With CMWR installed you can flash any rom you like in the developers section. The ICS roms I've tried are imilka's CM9v2 and ICS Stunner 5.0 Beta. CM9 was absolutely great but I like the added functionality that Stunner brings to the phone. Both roms are based on open source Android so no Samsung apps, if you want the s-pen apps like taking a screenshot, s-memo, s-note etc. then you're better off flashing a rom based on the LP6 leak.

Cool ill look into those roms thanks for all the help.

Hi all,
sorry if this is stupid because im kind of new to this.
I am having a similar problem with my galaxy note gt-n7000. its upgraded to ICS (no root, no custom flashed roms etc) from my carrier (Vodafone AU) and it was fine but after a week it also gets no call audio..
When i attempt a call, it connects successfully, (Although it doesn't make any calling sound) and I cannot hear the other party, but they can hear me
Im pretty sure its not a hardware issue, as other applications such as viber and tango both work fine.
Any ideas would be much appreciated. thanks in advance.

[Q] how can I repair wrong installed KERNEL on GT-I9220 - Help please!

Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...

Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.

here the ODIN log for 1.87 but same for 1.85
nokiamodeln91 said:
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
Click to expand...
Click to collapse
Thanks for having a look into this.
So Windows recognizes the following drivers if it is in Download mode
SAMSUNG Mobile USB CDC Composite Device
SAMSUNG Mobile USB Modem
And ODIN 1.87 recognizes the device under ID:COM yellow 0:[com3]
<ID:0/003> Added!!
after START PIT and Bootloader
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Phone does not do anything. :crying:
I assume that the wrong KERNEL is causing this missbehaviour!?
what to do now? Any idea?
Thx 1000times
So how do I first get a new fitting Kernel?

Le_Tifou said:
Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Click to expand...
Click to collapse
You would better restock your note.
You will need a rom with four files: .pit , .pda, modem and csc
The rom MUST be made for your phone and you may find it in samfirmware.com.
If your phone can't enter dowload mode, you'll need a USB JIG.
Hope this can help.
After reading the Odin resulst, try to flash only PDA as your error is comming from the PIT file.
Uncheck "repartition"

First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin

Is that the right file: 165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip ??
nokiamodeln91 said:
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Click to expand...
Click to collapse
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx

Even if you get a whole rom, it's good. Flash with odin without the pit

Le_Tifou said:
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Click to expand...
Click to collapse
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:

Thanks KERNEL has been changed back to original
lionelia said:
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Click to expand...
Click to collapse
Thanks both of you!!!
Odin 1.87 worked so far. And immediately Windows recognized the phone as GT-I9220 again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9220ZCLPL_I9220ZCLPI_I9220OZHLPL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I got after disconneting and taking out battery and restart -
got into mode VOL-up + power-on + center key
and made a factory reset as well as deleted cache
Modell: GT-I9220
Android version: 4.0.4
Baseband: I9220ZCLPI
KERNEL: 3.0.15 - ...
Build: IMM76D.ZCLPL
When I unpacked the ZIP file there was an additioal file ss_DL.dll what shall I do with it?
now it works thanks to you!
Great!

Nothing to do with the the dll file. Congrats for a working phone.

Rooting failure
nokiamodeln91 said:
Nothing to do with the the dll file. Congrats for a working phone.
Click to expand...
Click to collapse
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing

[ROOT][ANDROID11][OFFICIAL][MAGİSK] Magisk 22.0 patched boot.img M51

Magisk 22.0 Patched Boot Image
I'm not responsible for any bricked device.
Installation
1- Just flash it via odin.
2- After 1-3 loops it will boot into recovery. Don't panic just format data from there.
3- Install Magisk-v22.0.apk
4- Open it and click "Okay"
5- Enjoy it.
I'll release in three days twrp and ofox for Android 11. Use this rooted boot image for now.​

Great Work.
Looking forward to your Android 11 TWRP soon.
any progress updates for us, maybe?

Thanks man, awesome work! Looking forward to try your twrp version!

Thanks for the patched image. Root was one of the primary things keeping me on Android 10. Good to know now there's root for Android 11 as well. Will definitely be using this when I upgrade.

Hi everybody. In this moment, I have root for Android 10 version. Does it possible to get smartphone updates (Android 11 included) and keep the current root without problems? Or Should I unroot the device and after that, update in Android 11 version? Thank you.

does this root option breaks the fuse? after which samsung in the event of a guarantee knows that something was done? knox flag?

odin error
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 64 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> vbmeta.img
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

userprince said:
odin error
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 64 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> vbmeta.img
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Enable developer options and make sure that oem unlock is on

userprince said:
developer option no longer has oem unlock option.
Click to expand...
Click to collapse
you have to either turn on the access to the net or wait a few hours, I had it in samsung and it appeared after a while

"I'll release in three days twrp and ofox for Android 11. Use this rooted boot image for now." - please do

Hello my friends
1. Can I upgrade the mobile system from (Android 10 UI 2.5) to (Android 11 Oneui 3.1) using 5 files via odin?
2. Is this (patchedRamdisk.tar) a root of (android 11 Oneui 3.1)?
3. Then flash (TWRP-3.5.1_10.0_Beta1) and install (magisk-v22.0.apk).
And if there is a mistake in this, how is it to be done.

M H N said:
Hello my friends
1. Can I upgrade the mobile system from (Android 10 UI 2.5) to (Android 11 Oneui 3.1) using 5 files via odin?
2. Is this (patchedRamdisk.tar) a root of (android 11 Oneui 3.1)?
3. Then flash (TWRP-3.5.1_10.0_Beta1) and install (magisk-v22.0.apk).
And if there is a mistake in this, how is it to be done.
Click to expand...
Click to collapse
Do step 1 and 3. But use beta twrp 3.5 beta 2

LahKeda said:
Do step 1 and 3. But use beta twrp 3.5 beta 2
Click to expand...
Click to collapse
Can you give me the link please

M H N said:
Can you give me the link please
Click to expand...
Click to collapse
Check twrp thread and download the latest build provided in the thread

Is there any bugs ?? Can I uninstall system apps ?

Do we need to unlock bootloader first?

aze89 said:
Great Work.
Looking forward to your Android 11 TWRP soon.
any progress updates for us, maybe?
Click to expand...
Click to collapse
i need to wait for the twrp manifests for a stable build but i can port an unstable beta for you users if you want.

anggabastian said:
Do we need to unlock bootloader first?
Click to expand...
Click to collapse
Yeah

abhi_ki said:
Is there any bugs ?? Can I uninstall system apps ?
Click to expand...
Click to collapse
No its stable u can uninstall system apps but be careful.

M H N said:
Hello my friends
1. Can I upgrade the mobile system from (Android 10 UI 2.5) to (Android 11 Oneui 3.1) using 5 files via odin?
2. Is this (patchedRamdisk.tar) a root of (android 11 Oneui 3.1)?
3. Then flash (TWRP-3.5.1_10.0_Beta1) and install (magisk-v22.0.apk).
And if there is a mistake in this, how is it to be done.
Click to expand...
Click to collapse
yeah its a part of android 11 you can use it

Samsung S20FE SM-G780F/DS soft bricked?

Hello
my sister somehow managed to soft brick the phone.
It started randomly rebooting, then she ask for my help, i started android update (phone is 2yrs old and was never updated). I thought this would solve the problem, my plan B was factory reset.
But just when phone was installing the update it rebooted and never booted again.
I did factory reset (factory mode), didnt help.
Downloaded fresh latest firmware from sammobile, flashed with Odin and still doesnt work. Odin says that everything was OK.
I may or may not download wrong firmware tho, on the invoice for the phone it says SM-G780/DS but i can not find /DS version anywhere?(i suppose this is irrelevant?)
Any help here? Should i root my phone and try flash firmware with TWRP?
***EDIT***
phone rebooted while i was doing system update from Android 11 to Android 12. My guess is that this somehow bricked the phone.

Earlier i downloaded Android 12, Odin successfully installed it but phone didnt work.
Now I tried download Android 12 and i get this error
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 9673 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> up_param.bin
<ID:0/004> ldfw.img
<ID:0/004> FAIL!

I am really lost here.
I searched xda forums/google and if I am not wrong i should somehow unloc OEM before flashing any OS on the phone?.
OEM was never unlocked in develop. options. Is there a way to unlock it with ADB or somehow ?
Tried to flash TWRP but i got error on the phone saying OEM LOCKED

How to fix the missing OEM Unlock button on the Samsung Galaxy S9/S8/Note 8
try to follow this guide so you can see unlocked bootloader if its hidden.
then you can flash without errors hope it helps

you can get new phone if you have warranty

dehumless said:
I searched xda forums/google and if I am not wrong i should somehow unloc OEM before flashing any OS on the phone?.
Click to expand...
Click to collapse
This is incorrect. It's not needed if you're flashing stock fw.
dehumless said:
SM-G780/DS
Click to expand...
Click to collapse
It looks like it's missing a letter before the /DS. What does download mode say your model is?