I want to install the Eu rom on my new MI 8 which is running on global rom
I flashed TWRP and it says that the result of flashing is positive.
But now when I push the volume up button en the power button MI recovery starts up instead of TWRP
What am I doing wrong?
Chech the version of twrp
Related
Hi Devs,
I am currently using CM13 and TRWP Recovery in my Honor 4X, Model Che1-l04. Whenever I am trying to go into recovery mode by pressing the Volume Up + Volume Down + Power together its not opening the recovery. But I am able to open bootloader by pressing Volume Down + Power together.
Help me to get the issue so that I can fix it if possible.
Which version or twrp r u using ?
Try twrp 3020
Twrp 2870 caused me same problem
anirban.som said:
Hi Devs,
I am currently using CM13 and TRWP Recovery in my Honor 4X, Model Che1-l04. Whenever I am trying to go into recovery mode by pressing the Volume Up + Volume Down + Power together its not opening the recovery. But I am able to open bootloader by pressing Volume Down + Power together.
Help me to get the issue so that I can fix it if possible.
Click to expand...
Click to collapse
you can flash recovery.img stock by fastboot
extract recovery.img from update.app by extractoruptade
Did you fixed it
Hello, for some reason when I try enter into recovery it just ends in bootloop(although, I can enter to system w/o issues)
I've tried reinstalling TWRP as soon it's installed it load TWRP without issues BUT I just can enter recovery trought volume+ and power it just bootloops there.
Any ideas?
btw I'm in the AOSP Extended ROM if that matters.
Thanks
Also tried the cofface TRWP and same problem.
Before I was in xiaomi eu and it would load fine.
edit: ok, I found that atleast I can enter recovery from the restart menu in system.
Still can't from power and volume+
try flashing lazyflasher after flashing twrp
Try Vol+ Vol- and Power
It is volume up + volume down + power.
I also checked with reboot app but it fails on twrp 3.0.3.0 by cofface but in official twrp 3.1.1.0 is boots up normally.
In official twrp it shows error when make backups and restore
ConradB said:
Try Vol+ Vol- and Power
Click to expand...
Click to collapse
nischait said:
It is volume up + volume down + power.
I also checked with reboot app but it fails on twrp 3.0.3.0 by cofface but in official twrp 3.1.1.0 is boots up normally.
In official twrp it shows error when make backups and restore
Click to expand...
Click to collapse
Thanks, that worked.
Hi.
Im having alot of trouble doing custom stuff with my mi 9. At this point i have succesfully flashed aospextended on my mi 9 but i cannot enter twrp. It just "recovery loops" with the mi logo. I have tried flashing it again, just booting to twrp from fastboot but it still won't boot to twrp. I am consistently having issues booting to twrp at a point where i had to flash global stable from fastboot because it never stopped booting to stock recovery, where after i formattet cache and userdata. Thanks in advance.
Deleted
Hi!
Try telling us what you have done so far (in terms of modifications as well). Which recovery did you (try) flashing?
I personally tried skiantibag & maufirinio (I know it's not the proper spelling but you'll find it) + flashing RevolutionOS.
You've probably heard it already: Fastboot -> flash recovery -> does it boot into (after shutting down -> volume up + standby pressed)
If not try (first flashing the recovery) then booting from the .img file via fastboot.
After that wipe everything and flash Revolution OS/xiaomi.eu. Do you still experience the problems then? Short hint at the end: setup a password (code - during the android setup process) since your storage gets encrypted (no matter what - at least for me).
Good night, good luck!
ollioddi said:
Hi.
Im having alot of trouble doing custom stuff with my mi 9. At this point i have succesfully flashed aospextended on my mi 9 but i cannot enter twrp. It just "recovery loops" with the mi logo. I have tried flashing it again, just booting to twrp from fastboot but it still won't boot to twrp. I am consistently having issues booting to twrp at a point where i had to flash global stable from fastboot because it never stopped booting to stock recovery, where after i formattet cache and userdata. Thanks in advance.
Click to expand...
Click to collapse
after flashing twrp, (assuming ur using fastboot cmds to boot to twrp) use buttons to reboot to twrp. Long press power button and volume up together until device reboots, once it vibrates, let go of power but keep holding vol up until twrp boots. Then disconnect phone from pc. Twrp should now stick. Which twrp you using?
reg66 said:
after flashing twrp, (assuming ur using fastboot cmds to boot to twrp) use buttons to reboot to twrp. Long press power button and volume up together until device reboots, once it vibrates, let go of power but keep holding vol up until twrp boots. Then disconnect phone from pc. Twrp should now stick. Which twrp you using?
Click to expand...
Click to collapse
This. Rebooting from command line did not work for me either. Just press power + vol up until screen closes and keep pressing 3 more seconds after mi logo appears.
I have an unlocked bootloader
Flashed twrp v3.3.1 through fastboot and boot it using "fastboot boot twrp.img"
It does not booting to TWRP instead mi boot animation appears with powered by Android logo. I need to hold power button for seconds and need to reboot into system. If I open recovery by pressing vol up and power button ,twrp doesn't replace stock mi recovery.whats the problem. Using miui 11.0.1.0
It's fastboot FLASH recovery twrp.img
After flashing is done, press and hold volume up and power, once it vibrates release the power button and keep holding vol up, it will boot to twrp.
Then you'll have format data otherwise you might face a bootloop (i think)
Sent from my Redmi K20 Pro using Tapatalk
Boot should work as well though shouldnt it?
你没有刷TWRP成功
首先确认一下你的REC版本是否匹配
其次重新刷一次
再次，进入REC的方法是音量加 +电源键
You didn't brush twrp successfully
First, make sure your rec version matches
Second, brush again
Again, the way to enter rec is volume plus + power button
ishaqtkr said:
It's fastboot FLASH recovery twrp.img
After flashing is done, press and hold volume up and power, once it vibrates release the power button and keep holding vol up, it will boot to twrp.
Then you'll have format data otherwise you might face a bootloop (i think)
Click to expand...
Click to collapse
This thing works .After format data I rebooted into system and shutdown normally . Then I press volume up and power button it goes to mi recovery ,twrp doesn't replace mi recovery.what to do to have it permanently.
Tried
Ottograf said:
Boot should work as well though shouldnt it?
Click to expand...
Click to collapse
Yep
I had the same. I forget the exact steps but I had to flash a dm-verity thing. Don't know why some like ourselves seem to have this issue and others not. See https://miui.blog/any-devices/dm-verity-opt-encrypt-force-encryption-disabler-xiaomi/
Flash magisk to make it permanent
Sent from my Redmi K20 Pro using Tapatalk
Now it's permanent
You flashed magisk?
Sent from my Redmi K20 Pro using Tapatalk
ishaqtkr said:
You flashed magisk?
Click to expand...
Click to collapse
Yes.it has both DM Verity and force force encryption settings in it.
ishaqtkr said:
It's fastboot FLASH recovery twrp.img
After flashing is done, press and hold volume up and power, once it vibrates release the power button and keep holding vol up, it will boot to twrp.
Then you'll have format data otherwise you might face a bootloop (i think)
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
help I accidentally used the wrong command
fastboot flash boot twrp.img
and now I can only boot into twrp and fastboot and i cant boot into system
Flashed my Note 11 which was on Android 11 by twrp 3.6.1. When the install was done i rebooted and the phone reboots into twrp. What can i do next?
Edit: it now only boots into fastboot, regardless if i only press just the power button or the power button + volume down.
New attempts: the custom rom zip file on the phone is disappeared so i have to use ADB sideload to flash the rom by the pc. When the process is done i get the following error, see picture.
Did "format data" in twrp and it boots now normally.