Steering Wheel Programming - Android Auto General

I have a Chinese unit with android 6.0 and I am unable to reset or reprogram steering wheel buttons on my Toyota camry. My friend has similar unit on his camry and he also can't program steering wheel buttons. Does this mean that all android radios for Toyota canbus come with buttons pre-programmed and they can't be changed?
Andy advice would be greatly appreciated.
Sent from my SM-G955U1 using Tapatalk

You might want to try one of the Malaysk ROMs that are rooted and have XPOSED/MTCD Tools pre-installed (not all of his ROMs are like that though)
https://forum.xda-developers.com/an...ease-mtcdtools-control-music-players-t3436789
Short Answer: for most "Chinese units", you can't use the embedded app to assign functions to keys when you use CanBus
Long Answer... well, you'd have to provide a ton of more info on top of "I have a Chinese unit" if you really want a long answer But I bet you're only looking for a short pointer anyway
Max

SKORPiO1975 said:
I have a Chinese unit with android 6.0 and I am unable to reset or reprogram steering wheel buttons on my Toyota camry. My friend has similar unit on his camry and he also can't program steering wheel buttons. Does this mean that all android radios for Toyota canbus come with buttons pre-programmed and they can't be changed?
Andy advice would be greatly appreciated.
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
had same issue when using CANBUS adapter in my Toyota Fortuner. If you splice spare wires from your chinese head unit labelled Key1 and Key2 direct to the toyota steering wheel control wires (there should be 3 all up, Ground and wire 1 and wire2) and disconnect (cut) those wires from CANBUS adapter (external box) your head unit came with you should be fine. In my case its a simple resistance circuit, between Ground and each control wire.

Related

RK3188 Pumpkin Head Unit - SWC - 2015 Toyota RAV4

I've been around and around trying to validate how to get all of my RAV4 SWC keys to work.
At first I was told I needed a controller, so I bought an Axxess ASWC1, and their Toyota-specific cable. Did a lot of testing and finally found a radio setting (#11) that gave me most of my keys. I had Up/Dn, Vol+/-, MODE, and my 3 phone buttons working. Was still missing Left/Right/Center and the Back Arrow key. But not bad.
Pumpkin support (who has been really great despite the time zone difference) told me they had a specific Toyota harness that just hooked the SWC wires up directly. It was only $18, so I picked it up (took about 10 days to ship). When I got it, it works, but I only get 4 keys (Up/Dn, Vol+/-). Pumpkin support tells me it normally picks up all keys.
Has anyone else done an RK1388 install that does a direct connection (no controller) for SWC? If so, is the unit able to see all your keys?
Also interested in any insight about how SWC controls work. Does each key send a different voltage? Why are there 2 wires (+ ground)?
rad3 said:
I've been around and around trying to validate how to get all of my RAV4 SWC keys to work.
At first I was told I needed a controller, so I bought an Axxess ASWC1, and their Toyota-specific cable. Did a lot of testing and finally found a radio setting (#11) that gave me most of my keys. I had Up/Dn, Vol+/-, MODE, and my 3 phone buttons working. Was still missing Left/Right/Center and the Back Arrow key. But not bad.
Pumpkin support (who has been really great despite the time zone difference) told me they had a specific Toyota harness that just hooked the SWC wires up directly. It was only $18, so I picked it up (took about 10 days to ship). When I got it, it works, but I only get 4 keys (Up/Dn, Vol+/-). Pumpkin support tells me it normally picks up all keys.
Has anyone else done an RK1388 install that does a direct connection (no controller) for SWC? If so, is the unit able to see all your keys?
Also interested in any insight about how SWC controls work. Does each key send a different voltage? Why are there 2 wires (+ ground)?
Click to expand...
Click to collapse
Why don't you use search? There are several threads in this forum explaining how SWC works.
halloj said:
Why don't you use search? There are several threads in this forum explaining how SWC works.
Click to expand...
Click to collapse
I have, of course.
But searching for 'SWC' returns so much generic information, I haven't been able to find anything specific to my needs. And it's not like I don't understand the basics of SWC, as I have it working - I just can't tell whether or not I should expect to see 'all' keys from my RAV4 with one of these units. Pumpkin support tells me I probably should, but I haven't heard from any other users with a similar vehicle/head unit.
I can test the RAV's voltages coming off the SWC wires. What I could use information on is what voltages my head unit will recognize, so I can see if I'm missing something with the connections (directly wired using Pumpkin's own Toyota harness, so I don't think so), or with the head unit.
Let me know if there are any threads you'd recommend. Thx.
I have same issue with my sequoia 2015 ..
Exactly the same buttons you got not working
I have searched many topics and found nothing for my case
Please if found a solution let me know
Thanks

Advice on CANBUS functionaiity

I'm looking into buying an Android head unit, but I'm a bit overwhelmed by the many options. As my car (Peugeot 207) has a CAN bus, one of the things I'd like to know a bit more about is the CAN bus functionality that Android head units provide.
I'm seeing that some units do have a CAN bus connection and can be configured for a specific car model (e.g. Peugeot 207, or Honda Jazz, etc). I do have some questions about this:
The most basic function would be to be able to use the steering wheel controls, so I assume this works? But what buttons do work (Volume up, down, next, previous, ffwd, rwd, source, and I also have a sort of scroll wheel (for menu navigation))?
A more advanced function would be the climate control (dual zone). Is this possible? I've seen it on some Volkswagen-specific units?
I have a multifunction display in the car, which is also operated by CAN bus. Do Android head units also provide functions to display data on such a screen (like song metadata, etc)
It would be nice to be able to manually configure the CAN bus mapping, in a UI or maybe in a file. Is that possible?
The Peugeot radio works on a comfort/fault tolerant CAN bus at 125kbps. Is that supported (I have had some problems with devices that only support high speed CAN bus which is not compatible on a hardware level)?
If such functions exist, does it differ per unit/brand? Can it be copied or migrated in a custom rom or apk?
I realise this is quite a broad question, but I hope you guys can share some of your experiences. Of course, experiences with a Peugeot (a 207 even) would be best.:good::fingers-crossed:
This is with a Px3 unit and a VW Eos, but... on my vehicle with CanBus, the steering wheel controls worked with no configuration - volume controls, back / forward buttons, the phone button launches the dialer, I believe, and there's a mic button that was for (a thoroughly useless) voice activate command on the original head unit, this acts as a mute button. At least on my vehicle with Canbus, there is NO ability to custom configure the wheel keys - they do the above, and that's the only option.
The multifunction screen doesn't have a page from my head unit - moving horizontally went between car data (speed/consumption/etc) <-> Setup <-> Radio, and with the new h/u, it just flips between setup and car data.
I haven't figured out climate control yet.
Sent from my Lenovo YB1-X90F using Tapatalk

Ford Canbus problem

Hello guys! I have a little problem, because I reset to factory settings and I don't have backlights in keys and I don't know what take settings for canbus, on Ford Mondeo(simple) and other don't work, I can't use control keys in wheel. How I take option "NO" on canbus setting I can use keys in wheel. What is good for settings on canbus? Maybe something I wrong connect? I read something about key1 and key2 cable, but I don't know... Cheers.
Isudar Ford Android 8.0, 4GB RAM, Octa-Core.
VoSooler said:
Hello guys! I have a little problem, because I reset to factory settings and I don't have backlights in keys and I don't know what take settings for canbus, on Ford Mondeo(simple) and other don't work, I can't use control keys in wheel. How I take option "NO" on canbus setting I can use keys in wheel. What is good for settings on canbus? Maybe something I wrong connect? I read something about key1 and key2 cable, but I don't know... Cheers.
Isudar Ford Android 8.0, 4GB RAM, Octa-Core.
Click to expand...
Click to collapse
Your English is not very understandable, can you rephrase it?
foicanetadavo said:
Your English is not very understandable, can you rephrase it?
Click to expand...
Click to collapse
It's fine now.
I have an 2006 Ford Focus with steering control and an A-Sure 8.0 HU. I buy this HU because the descripton was, that the radio was with built in can bus modul and that wasnt true. The steering control has two extra wire für swc and has nothing to do with Can bus. In my car the swc wire are pin 6 and 8 in the B section of the quadlock (white/black and brown/yellow). On my radio it was cable SWC2 and GND.
I have a mondeo with Ford convers+ display between indicators cluster.
With the radio app, the drawing is shown on the convers with the frequency. With dvd the cd and track 1 is visualized on the convers. If active the music app (always original like the ones written before) the aux image on the convers is displayed. With any non-original app, radio, music etc. the information in the convers does not work, as if the original radio was turned off. Someone has modified something to make the aux function appear on the convers, because with off function it looks very bad. I have radio eonon Ga8161 7.1 (KLD px3)

Steering wheel control help

I have a 2015 Subaru Impreza that I'm trying to put an Xtrons TE103AP head unit in and I can't get the steering wheel controls to work. I bought an Axxess ASWC-1 harness that I'm thinking I probably don't need. I've got the latest Malaysk firmware -MTCE px5- on the head unit. I think I read something about changing the CAN bus settings. If anyone can give me some help I would appreciate it because I'm thoroughly frustrated.

Parking radar not working on ALPS 8227L_demo. Peugeot partner tepee car

Hello
Parking and reverse radar not working on my car (peugeot partner tepee model. French type)
I have installed new head unit ALPS 8227L_demo. Not rooted yet & not updated.
All works except rear radar wich stopped and beep disappear.
Please assist.
SamirXda2019 said:
Hello
Parking and reverse radar not working on my car (peugeot partner tepee model. French type)
I have installed new head unit ALPS 8227L_demo. Not rooted yet & not updated.
All works except rear radar wich stopped and beep disappear.
Please assist.
Click to expand...
Click to collapse
Do you have a canbus converter installed?
It is mandatory to have other features than steering wheel controls.
Yes.. Can bus cable in place & connected.
I cannot find PARTNER TEPEE can bus protocol in the list buy it works with others from Peugeot's vehicle.
Somebody was talkinh to me about canbus cable to be the same with the softwate...is it right that canbus cable may change with software version ?
t3l3m4k0 said:
Do you have a canbus converter installed?
It is mandatory to have other features than steering wheel controls.
Click to expand...
Click to collapse

Categories

Resources