After I flashed TWRP, root, and installed a custom rom, notification LED doesn't seems to work anymore once the device is turn off. The notification LED allows me to know the status of my charge at a glance so it kinda bothered me when I noticed it wasnt working anymore. Anyone knows how to fix this problem?
Most of the roms have an option for that on settings.
Charging Led or something like that.
rmrbpt said:
Most of the roms have an option for that on settings.
Charging Led or something like that.
Click to expand...
Click to collapse
I already adjust the settings. It works when the device is POWERED ON but not when its POWERED OFF.
Related
Has anyone found an app that gives us better control over the hardware LED?
I'd like to have the notification light periodically blink when there's an SMS message or missed call, (and maybe some of the other important notifications), and the default settings offer so little control as to be useless. <rant> Seriously, why would I want a LED to tell me if the phone is charging, I can see damned well that it's charging, there's a cord attached! </rant>
There's the LEDBlinker app, which has all the options i'd want, but when I put it into test mode, it doesn't blink the leds.
Has anyone else tried to do this? Has anyone had any success? It's a cool hardware feature, that I think i'd really use - but it's hobbled by the crap configuration options Samsung gave us.
Thanks
DrAzzy said:
There's the LEDBlinker app, which has all the options i'd want, but when I put it into test mode, it doesn't blink the leds.
Click to expand...
Click to collapse
Samsung prevents the LED notifications from working unless the screen is turned off. I'm using Light Manager (the dev participates on this forum), and so far it works fine in "alternate" mode. When you test the LED settings, a pop-up tells you to turn off the screen, and only then will the test work (and it does).
barnabydog said:
Samsung prevents the LED notifications from working unless the screen is turned off. I'm using Light Manager (the dev participates on this forum), and so far it works fine in "alternate" mode. When you test the LED settings, a pop-up tells you to turn off the screen, and only then will the test work (and it does).
Click to expand...
Click to collapse
Thanks - turns out I'd turned the LED off in settings (along with the options to use the LED to show charging status). /facepalm
Anybody tried light flow yet?
Works like a sharm! No root necessary. The new notification light is much better then the speaker built in thing from the z1c.
Tested "Light Manager" and that works, too.
Can't seem to change the charging led though
Yup, I have the paid for version of Light Flow setup and working perfectly!
sim87 said:
Yup, I have the paid for version of Light Flow setup and working perfectly!
Click to expand...
Click to collapse
How about the charging led?
cyphomatic said:
How about the charging led?
Click to expand...
Click to collapse
I just tested and i can't get light flow to change the charging LED. It doesn't even turn off if you disable the notification light in Androids DIsplay settings.
sim87 said:
I just tested and i can't get light flow to change the charging LED. It doesn't even turn off if you disable the notification light in Androids DIsplay settings.
Click to expand...
Click to collapse
To bad. It's keeping me awake at night and really holding me from buying a dock.
sim87 said:
I just tested and i can't get light flow to change the charging LED. It doesn't even turn off if you disable the notification light in Androids DIsplay settings.
Click to expand...
Click to collapse
I've been able to sort of fix this using Light Manager. I select a really dark color (almost black) for both charging and fully charged set it to be always on (no blinking).
It's kinda finicky, though, and sometimes it takes a few moments until it LM takes over from the built in notification light. For me, Light Manager works better than Light Flow. YMMV, it's possible to do this with both of them.
cyphomatic said:
To bad. It's keeping me awake at night and really holding me from buying a dock.
Click to expand...
Click to collapse
Flip it over.
NRG1975 said:
Flip it over.
Click to expand...
Click to collapse
:cyclops: still no solution for when I would dock it.
Fruktsallad said:
I've been able to sort of fix this using Light Manager. I select a really dark color (almost black) for both charging and fully charged set it to be always on (no blinking).
It's kinda finicky, though, and sometimes it takes a few moments until it LM takes over from the built in notification light. For me, Light Manager works better than Light Flow. YMMV, it's possible to do this with both of them.
Click to expand...
Click to collapse
Just wanted to say that I have done this with Light Flow and it works great. It still shows the default charging colours when the screen is on, but when it's off it uses the ones in light flow. The trick is to use anything but totally black. I set it with the HEX code to FF000001 and it works.
That is on a full-size Z3 but I can't imagine the hardware is different regarding LEDs.
I use light manager and it does work with a dark colour to set the charging/charged led colour. (dark blue)
BUT
When I use sleep mode (so I get to notification lights) the charging/charged trick doesn't work ....
So I have to dissable sleep mode
anyone has a solution for this?
Lightflow doesn't seem to work for me neither.
Is there any other option without rooting the device (no option, as it's for the device of my girlfriend)
Works perfectly for me. Keep trying. Make sure it's enabled in settings security notification access.
Sent from my D5803
phositadc said:
Works perfectly for me. Keep trying. Make sure it's enabled in settings security notification access.
Sent from my D5803
Click to expand...
Click to collapse
Hmmmm very good point. Thx for the advice. I think I activated this after the installation of Light Flow. I remember some red info message bugging me But to be honest I can't find this setting anymore. Where can I reconfigure/ review this?
tertom said:
Hmmmm very good point. Thx for the advice. I think I activated this after the installation of Light Flow. I remember some red info message bugging me But to be honest I can't find this setting anymore. Where can I reconfigure/ review this?
Click to expand...
Click to collapse
Settings -> Security -> Notification Access
Sent from my D5803 using XDA Free mobile app
Light Manager works for me, colorwise - but I get constant false SMS blink - any solutions?
sxtester said:
Settings -> Security -> Notification Access
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
Ahh Thx But this doesn't seem to be the problem. Checkbox for Lightflow is checked there.
Will keep trying to get it working.
Thanks a lot for the help so far.
Light flow works like a charm for me and love how I set colour per notification type it's the only app that works 100%
I flashed blisspop 4.0.3 and noticed that it turns the led light on when the phone powers off. Any ideas to fixb this?
And why doesn't my led light come on when a notification is there?
AverageLibrarian said:
I flashed blisspop 4.0.3 and noticed that it turns the led light on when the phone powers off. Any ideas to fixb this?
And why doesn't my led light come on when a notification is there?
Click to expand...
Click to collapse
sounds like something that you should ask in that roms thread, as thats where youll find your answer.
I got my R1 HD recently. After I set up everything I noticed that when the screen is off, no matter whether I received an email, a sms or a missed call, the LED light just didn't flash. The phone did notify by sound and I can see items in status bar when I turn on the screen.
I looked at everything in the Settings, but couldn't find anything wrong. I called R1 representative and he said he never heard such issue before.
Then I ordered a replacement from Amazon and it arrived today. You know what, same thing happened! No LED light for notification. Just sound notification.
The only time I know there is an LED light is when I charge the phone (red) or when it's fully charged (green).
Has anyone seen such issue before? I greatly appreciate the help!
The LED can really only display red and green as when they are both on the red greatly overpowers the green so the color combination is not detectable. Lightflow can control which apps have access to the LED and which color to display. The LEDs are either on or off - no brightness levels. I have also not been able to get the LED to blink on notifications and suspect that this is also a hardware limitation of the phone. I've been quite disappointed in the LED notification capabilities. There are a couple of other threads about the notification light in the Blu forums here if you search
Thanks for the reply! I did try Lightflow, but it didn't help. In test mode or real mode, what I got was just a status bar notification, no LED.
yaconsult said:
The LED can really only display red and green as when they are both on the red greatly overpowers the green so the color combination is not detectable. Lightflow can control which apps have access to the LED and which color to display. The LEDs are either on or off - no brightness levels. I have also not been able to get the LED to blink on notifications and suspect that this is also a hardware limitation of the phone. I've been quite disappointed in the LED notification capabilities. There are a couple of other threads about the notification light in the Blu forums here if you search
Click to expand...
Click to collapse
I did have to change some settings for it to work with the Blu phone.
These are the settings I am using that allow apps to turn on the LED:
Under General settings, the following are checked:
Enable Light Flow
Show LED in priority mode
Device Admin
Enable Clear all
Accessibility check
Version upgrade reminder
Under Device settings and root, the following are checked:
Direct mode
Root mode
Run every command as root
Show LED with screen on
Nexus 5 force LED reset
I also have light flow enabled under settings->accessability and lightflow has root permission in supersu.
Oh so I have to root the phone? I just called Blu customer service, and they told me I need to do a factory reset..
Try it and let us know what happens, please. Some phones require root and others don't. I reflashed and rooted and xposed mine before I did anything else so I don't know if it works without root or not.
Solved! Did a hard reset (not factory data reset thru Settings) by pressing power button and volume up together to enter the recovery menu. I cannot believe Amazon/Blu missed such an important step that the customer has to do it by themselves..
Same here bit in a Blu vivo 5R in this case.
So... I need to execute a Factory Reset? And then appears the option for LED notification And works.
Hi ! I did buy a BLU VIVO XL2. No LED activity for notifications. I have the options for LED behavior (Settings/Advanced Settings/Under Hardware title, LED indicator, Notification Reminder ON but green LED never flashes when expected. Factory Reset tried: I used Volume Up & Power Button to get recovery menu. There, I took a backup (SD storage, no compression, several chunks of data). After that, I selected Factory Reset. When rebooted, Google did his automatic restore of phone. After that, I tried Restore from Recovery menu, but a msg informed backup was corrupted, so, I did get a full Factory Reset status, with my phone memory user data lost. NO LED Notifications working after all these actions !!!!! . LED is alive, when reporting Power status, so it is not HW damaged. I will keep fighting to get my LED notification activity working... Regards, Norberto !!!
Try the free version of LightFlow from the play store. It will allow you to test and turn individual notifications on or off. The light can on display red and green colors and the red is very much brighter than the green. Mine turns flashing red when I miss a phone call on the Blu R1 HD>
Hi !! Thnx yaconsult. I did try free & legacy, unsuccessfully. Have a good day !!
I guess the Vivo works differently, then. The notification light works ok on my R1. If I miss a call, I get a blinking red light.
I have been searching looking for way to make this work with no solution.
I have disabled AOD since it is consuming battery heavily and wanted notifications to behave as on stock android where they turn screen on. My note 8 is receiving notifications and LED turns on, but screen doesn't. I have to manually turn it on to be able to see the lockscreen notification.
Is there any way to make this work?
+1
Facing same issue.
Having the same problem. Aod does not work anymore.
ralphoberholzer said:
I have been searching looking for way to make this work with no solution.
I have disabled AOD since it is consuming battery heavily and wanted notifications to behave as on stock android where they turn screen on. My note 8 is receiving notifications and LED turns on, but screen doesn't. I have to manually turn it on to be able to see the lockscreen notification.
Is there any way to make this work?
Click to expand...
Click to collapse
I use "Dynamic Notifications". It lights up notifications when screen is locked. There's a certain amount of customisation, including screen on time. Used it on many of my phones including Note 8.
Wait.. You want the screen to turn on for every notification?
I hate that... Some apps even ignore the settings either way.
meboy said:
Wait.. You want the screen to turn on for every notification?
I hate that... Some apps even ignore the settings either way.
Click to expand...
Click to collapse
Same here, that would drive me nuts if the screen turned on for every notification. It's bad enough the screen turns on everytime the phone is plugged in/unplugged from USB or from a wireless charger.
Shouren, you can try snoozy charger app to manage the plug/unplug screen on issue
winol said:
Shouren, you can try snoozy charger app to manage the plug/unplug screen on issue
Click to expand...
Click to collapse
Thanks. The rom I'm using is actually supposed to have that disabled but I don't think it works for wireless charging, only cable. I never never charge with the cable anymore. But whatever, I prefer not to install apps just to disable one minor thing.
I understand you, I also prefer wireless, but, it works with wireless too
There must be a build prop tweak or something but I can't seem to find one right now.
Maybe a PM to a nice dev and they could tell you where to look. Report for community if you figure it out