I flashed the Pixel Experience 8.1 rom and it worked fine. Now when i flashed the PE rom 9.0 it gave an error showing my storage as 0MB. I managed to fix that, but now when I'm flashing the same PE 8.1 rom, my phone is running into a boot loop. Please help me
Boot into TWRP, wipe everything. Then perform factory reset in TWRP. After that, copy a ROM using PC or otg to device, and flash.
aFoxWhoIsNice said:
Boot into TWRP, wipe everything. Then perform factory reset in TWRP. After that, copy a ROM using PC or otg to device, and flash.
Click to expand...
Click to collapse
I tried that but its not working. I tried flashing other rom too. Its the same issue
_royston_fernandes said:
I tried that but its not working. I tried flashing other rom too. Its the same issue
Click to expand...
Click to collapse
If that's the case, then connect it to your PC, and use fastboot to go back to stock ROM. If you want help go to our telegram group https://t.me/g5splus
I know I'm kinda late but I'm here to help people with the same problem. I force rebooted during a twrp backup (cause I'm dumb) and it caused a softbrick. The recovery was stuck on the start screen and Android also didn't boot. I used the fastboot command fastboot flash boot boot.img to reflash the boot image and boom it worked. I don't know why it got destroyed during a backup but yeah, hope it helped.
Related
I was on MUI9 Nougat 7.1.2. Unlocked my bootloader properly. Wanted to try out Google Camera. So I searched the forum, found TWRP 3.0.3 Installer. Installed the TWRP successfully. Then I thought of installing the new TWRP, so flashed TWRP 3.2.1 from the previous TWRP. When I booted back to Recovery, saw the Encryption Error. I never set any password. Got tensed. Searched the forums again for solution. Found that I have to format the data. So formatted the data, flashed LazyFlasher. Did not know what else to do, tried booting and got stuck in Bootloop. I only have Internal Storage. And have one OTG Pendrive in case it comes handy. Downloaded Dot OS 7.1.2 and tried to install it from the OTG by booting back to TWRP, failed, it said Corrupt ZIP, but the zip file was ok. So started the process again, rebooted back to TWRP, wiped everything and this time tried to flash an old MIUI9 Recovery ROM through it, it still gave the same error, Corrupt ZIP. So basically what I have left is that I can boot into TWRP and also Fastboot is working well. But dont know how to get past this Bootloop. Someone please help. Really urgent. So tensed. :crying:
do you flash miui rom in twrp or miflash? try to flash the miui rom with miflash and see if ur phone booted up or not.
Deleted
Deleted
Thanks bro. Never mind. Somehow managed to flash DotOS Nougat version through TWRP 3.0.3. Now bro please tell me one thing. I wont stay at DotOS, I dont like it, just flashed it to get through the bootloop. So now I have downloaded MIUI9 8.3.22 Developer Recovery ROM. Still having TWRP 3.0.3, BL Unlocked, ADB working, Fastboot working, USB Debugging everything taken care off. Just tell me steps to flash the Developer ROM now so that I dont go into bootloop again. Please. Thanks in advance.
ummm kinda easy actually, download the miflash software, open it, it should have the select, refresh, and flash menu. click select, and navigate to your rom file (u need to download the fastboot rom version! not the recovery version, should be easy to find in google. the format should be .tgz change it to rar, extract it, it will shows another rar extract it again, it should be folder now) that folder is your rom file. now enter fastboot mode, plug ur phone, and click refresh. it will shows some number and alphabet. if the number and alphabet appears, click flash! and wait! and ur phone will boot itself
sorry for **** english
1. Go to twrp...
2. Wipe (cache, data, dalvik/cache, system)
3. flash miui 9 dev 8.3.22
4. flash lazyflasher...
Reboot..
It will take more then 5 min to start (first boot usually take that much time)
Your phone boot normally....
If you are facing TWRP Recovery Issue then update TWRP
Link :- https://drive.google.com/drive/folders/17YW09XpEHq7xgBAriwA-mgtEG0pckop2?usp=sharing
V3.2.1-5 is latest one...
Hit thanks
From my Redmi 4X using Tapatalk VIP
I had an issue where my tablet would just reboot over and over. So I tried to reset it using factory reset. This has me now in a recovery reboot loop.
Hardware:
Galaxy Tab S2 (SM-T713) - wifi only
Software:
TWRP 3.1.0.1
Lineage OS 16
What I've tried:
Wiping cache and davalik cache several times
Formatting data
adb reboot fastboot
Wiping cache, davalik cache, and system (which made TWRP report no system of course)
adb sideload of lineage OS 16 - reported success but TWRP still said no system
re-flashing the lineage OS 16 ROM from SD card (this resolved the no system issue)
Reboot to system from TWRP and adb fastboot after the system re-flash
Odin won't respond and says it can't contact the tablet (multiple usb cords tried , etc) so no luck re-flashing OEM ROM
No matter what, it goes into recovery reboot and won't try to start the system. I can't find anything else to try through searches on XDA, google, etc. Any suggestions?
Not exactly the same, but I thought I had hard bricked my T713 about 9 months ago. I was on stock at the time (not even sure what build), and a bunch of wipes and formats later I was in a TWRP loop. I couldn't even power the machine down. Even that would loop me back to TWRP. I managed to back door my way into download mode by installing the boot.img from the external SD card. That didn't fix anything, but after that I was able to hold down power and volume down and spam the home button until I got to the download screen. After that I was able to get back into odin3_v3.12.5 and load the factory image. I am on LineageOS 16 official now, so I have no idea if this is of any help. I'm pretty sure the boot img came after drilling all the way into the XAR-T713XXU2BRB2_T713XAR2BRB2-20180206 file, since that is the one I eventually got to load.
Yes, I forgot to mention that symptom - it won't power down at all. Just goes back to TWRP.
I'll give that a try, thanks.
apollard said:
Yes, I forgot to mention that symptom - it won't power down at all. Just goes back to TWRP.
I'll give that a try, thanks.
Click to expand...
Click to collapse
Flashing the boot.img file did it! I was able to get in to download and use Odin to reflaah the stock ROM. Now to switch to LOS.
apollard said:
Flashing the boot.img file did it! I was able to get in to download and use Odin to reflaah the stock ROM. Now to switch to LOS.
Click to expand...
Click to collapse
I am so glad that worked for you.
Hello guys!
Yesterday I tried to flash the newest Lineage-built to my new G7+ (XT1965-3, bought in Germany via Amazon), but something went wrong and now I'm afraid, I bricked my phone.
It's not my first flash of Lineage, as I did this in the past already on some older Phones (SII, SIII, S5), but it's the first time, that I have a major issue.
So I followed all the steps on the Lineage-Wiki (on Win10).
After flashing the recovery (the lineage-recovery, not TWRP) I wasn't able to enter the recovery-mode, so the phone booted to StockRom. And probably this was the problem: As it didn't react to VolumeDown+Power, I reflashed the recovery a second time. After that the touch-screen is not working any more.
I am able to enter the recovery-mode and I can boot to Stock-Rom, but in both modes the phone does not react to touch, so I can only use the Volume- and Power-Buttons.
Probably I made more mistakes after that: I thought, that a factory-reset would help, but It didn't. I also relocked the bootloader, but as I saw, that it also did not bring any solution, I unlocked it a second time.
Conclusion: I have a brand new phone, with lineage-recovery, an unlocked bootloader but without touch working.
I also tried to flash Lineage, but the sideload got stuck at 47%. So Lineage is not installed and it boots into Stock, where I can not get any further without touch.
Has anyone any idea, what could be the issue and how I can fix it? I would like to start from scratch, but I don't know, what is the exact problem and if i can for example return to stock recovery.
Thank you!
---- EDIT ----
If it helps: I am able to boot TWRP via "fastboot boot twrp-xxx.img". And in TWRP the touch works!
I could flash lineage directly via TWRP from external sd-card, but i am afraid that after that I won't be able to return if something goes wron.
probably your best bet is to go right back to stock using the LMSA tool and starting fresh. I've seen others encounter similar issues on different devices and always the cleaneast solution was just to role back everything and start over.
Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.
joglxv said:
Thank you so much. With LMSA I managed to restore everything to stock and touch is working!
So I'm going to start from scratch and finally install Lineage.
Is is indicated to use the Lineage-Recovery, as the Lineage-Wiki says, or would it better to use TWRP?
TWRP gives me the option to flash from sd-card, which seems to me better than via sideload.
Click to expand...
Click to collapse
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.
digitaljeff said:
Glad your back up and running. Take a look in the lineage thread, but it does appear most people lean towards using twrp, shouldnt have an issue with either however.
Click to expand...
Click to collapse
I'm having a similar problem. At first touch was fubar but I was able to return to stock using LMSA and now touch works. I can load TWRP with fastboot and even install a custom ROM and TWRP, but installing any custom ROM results in a boot loop during the finding and installing updates part of the phone setup during first boot. I'm tried Evolution X which I was running previously(for about a month, and then a boot loop started yesterday), PixelOS 10, and AncientOS, but all result in the boot loop on first boot after connecting to wifi.
Fixed
I fixed this somehow by manually flashing the latest stock firmware to slot a, and then extracting the evolution x Rom and manually extracting the IMG files inside and manually fastboot flashing those to slot b. I then set b as the active slot and booted up, patched the boot image with magisk, flashed that, and everything works. Not sure why twrp wouldn't do the trick.
Finally had the time to install Lineage. Now everything works.
I followed the instructions someone posted in the [ROM][OFFICIAL] LineageOS 17.1 [nightlies]-thread and the instructions of the lineage-wiki:
1. fastboot boot TWRP
2. sideload the copy-partitions.zip from lineage-wiki
3. factory reset via TWRP (wipe cache, dalvik and data)
4. sideload lineage
5. reboot bootloader
6. fastboot boot TWRP
7. sideload magisk
8. reboot system
Had a little bootloop the first time rebooting the system, but that was because I forgot to wipe data-partition in step 3. Wiping data and rebooting did it for me.
So I have a working Lineage17.1 with root via Magisk.
Thank you for the help!
I had exactly the same problem like you had. Bought a brand new moto g7 plus and after recovery flash, Touchscreen was not working anymore. I could manage to go back to the bootloader, sideloaded TWRP, but side loading lineage worked for me then. It seemed to be stuck on 47 percent, but this seems to be a normal issue, the file was there and after installing, touchscreen worked normally.
Tried a bunch of things to make the TWRP installation persistent, but it just goes back to MIUI recovery when i reboot from the system.
I'm using TWRP 3.5.2 by Nebrassy.
USB debugging turned on
Correct drivers installed
fastboot devices work Using minimal ADB and fastboot
I have the file renamed as TWRP.img.
Steps i followed:
fastboot boot "TWRP.img" - Correctly boots into TWRP
install the TWRP image to the recovery partition - Happens with no errors
Reboot to system - No errors there as well
Reboot to recovery - Goes back to MIUI recovery.
Can someone please tell me what i should do?
PS: Tried with TWRP 3.6.0 as well just now. Same issue.
Helhound0 said:
Tried a bunch of things to make the TWRP installation persistent, but it just goes back to MIUI recovery when i reboot from the system.
I'm using TWRP 3.5.2 by Nebrassy.
USB debugging turned on
Correct drivers installed
fastboot devices work Using minimal ADB and fastboot
I have the file renamed as TWRP.img.
Steps i followed:
fastboot boot "TWRP.img" - Correctly boots into TWRP
install the TWRP image to the recovery partition - Happens with no errors
Reboot to system - No errors there as well
Reboot to recovery - Goes back to MIUI recovery.
Can someone please tell me what i should do?
PS: Tried with TWRP 3.6.0 as well just now. Same issue.
Click to expand...
Click to collapse
Try again to flash TWRP dirty and if it's started don't boot with software. You have to boot TWRP again by pressing volume + and power button until you'll get vibration , afterwards you'll be in TWRP again, clear dalvik and cache and restart system via TWRP menu
Laptapper said:
Try again to flash TWRP dirty and if it's started don't boot with software. You have to boot TWRP again by pressing volume + and power button until you'll get vibration , afterwards you'll be in TWRP again, clear dalvik and cache and restart system via TWRP menu
Click to expand...
Click to collapse
Sorry mate that didn't work. Still going back to stock recovery...
Since i didn't find a solution to make the installation presistant, i went ahead and flashed Elixir with the temporarily booted TWRP. Then wiped cache and dalvik, flashed the TWRP image, formatted data and then rebooted. Now it works.
Edit: This method did something to my recovery. I can boot to system and recovery fine but TWRP isn't able to mount the data partition. So i'm not able to flash anything or root the device anymore.
I tried formatting data, no luck.
Then tried repairing the data partition. No luck.
Changed the file system to EX2 and then EX4... Nothing.
Anyone know a solution for this?
Helhound0 said:
Sorry mate that didn't work. Still going back to stock recovery...
Click to expand...
Click to collapse
Then you've got to do a flash with stock ROM and miflash via pc
Laptapper said:
Then you've got to do a flash with stock ROM and miflash via pc
Click to expand...
Click to collapse
Would that re-lock the bootloader? And if so do i have to wait 7 more days for it to be unlocked?
I used the Disable-Dm-Verity-Zip directly in TWRP after installation. Worked without a problem.
romuser87 said:
I used the Disable-Dm-Verity-Zip directly in TWRP after installation. Worked without a problem.
Click to expand...
Click to collapse
I read that somewhere too but that didn't help me at all... Maybe i have a bad zip file..
Can you share the zip you flashed?
Also, any idea how i could get this fixed:
Helhound0 said:
Since i didn't find a solution to make the installation presistant, i went ahead and flashed Elixir with the temporarily booted TWRP. Then wiped cache and dalvik, flashed the TWRP image, formatted data and then rebooted. Now it works.
Edit: This method did something to my recovery. I can boot to system and recovery fine but TWRP isn't able to mount the data partition. So i'm not able to flash anything or root the device anymore.
I tried formatting data, no luck.
Then tried repairing the data partition. No luck.
Changed the file system to EX2 and then EX4... Nothing.
Anyone know a solution for this?
Click to expand...
Click to collapse
Helhound0 said:
I read that somewhere too but that didn't help me at all... Maybe i have a bad zip file..
Can you share the zip you flashed?
Also, any idea how i could get this fixed:
Click to expand...
Click to collapse
The attached file worked for me
Helhound0 said:
Would that re-lock the bootloader? And if so do i have to wait 7 more days for it to be unlocked?
Click to expand...
Click to collapse
1. With MiFlash there is an option at the bottom of the screen to lock bootloader. Just make sure it is NOT checked, and you will be safe to use MiFlash without relocking bootloader.
2. When installing TWRP for first time, it is essential that your first reboot is straight back to TWRP - then it becomes persistent, and future reboots to recovery will be to TWRP. If you do not do the first reboot back to TWRP, the stock MIUI ROM recovery reinstalls itself.
HiQual said:
1. With MiFlash there is an option at the bottom of the screen to lock bootloader. Just make sure it is NOT checked, and you will be safe to use MiFlash without relocking bootloader.
2. When installing TWRP for first time, it is essential that your first reboot is straight back to TWRP - then it becomes persistent, and future reboots to recovery will be to TWRP. If you do not do the first reboot back to TWRP, the stock MIUI ROM recovery reinstalls itself.
Click to expand...
Click to collapse
The first ever twrp install i did, i rebooted to system by mistake but i reflashed twrp and made sure to reboot to recovery.... That was the second try. I think i may have tried at least two dozen times since that but it just kept booting back to stock recovery...
I think I'll run with this until the end of Jan and then redo everything from scratch...
Helhound0 said:
Since i didn't find a solution to make the installation presistant, i went ahead and flashed Elixir with the temporarily booted TWRP. Then wiped cache and dalvik, flashed the TWRP image, formatted data and then rebooted. Now it works.
Edit: This method did something to my recovery. I can boot to system and recovery fine but TWRP isn't able to mount the data partition. So i'm not able to flash anything or root the device anymore.
I tried formatting data, no luck.
Then tried repairing the data partition. No luck.
Changed the file system to EX2 and then EX4... Nothing.
Anyone know a solution for this?
Click to expand...
Click to collapse
I'm stuck at this stage. Have you found any solution yet?
installed twrp successfully without any errors, phone booted and worked, later i installed magisk zip from twrp done successfully but phone stuck on nokia logo for some time, and always booting into twrp recovery, anyone pls help
maybe it was hard resetted.. try to do factory reset but if doesn't work flash a new rom
greg10 said:
maybe it was hard resetted.. try to do factory reset but if doesn't work flash a new rom
Click to expand...
Click to collapse
Flashed a stock firmware from OST, working fine now, not rooting again better stay away from things idk