Related
How to get your BELL ATRIX HD onto At&t Jellybean (4.1.1) - Unlocked bootloader ONLY!
I would like to start saying that I’m not responsible for whatever happens to your phone. Thanks to MATTLGROFF who figure out this way of flashing this jellybean leak on my phone.
Having that said THIS IS ONLY FOR BELL ATRIX HD USERS THAT HAVE THEIR BOOTLOADER UNLOCKED. Please read thru and ask any questions before attempting
OK here we go:
1. I assume you’re in stock BELL ICS ROM (77.55.18.MB886.BellMobility.en.CA) … it doesn’t matter if you’re rooted or not. Make sure you have the motorola drivers installed.
2. Enable debugging mode on your phone (settings>development options> enable USB debugging)
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
4. Now double check you’re unlocked.
5. Make sure you have a charged battery (more than 60%) and boot into fastboot. (if you're not already here)
6. Now download the stock ICS zip for At&t.
a. Unzip it
b. Make sure you have the fastboot files in the same folder/path as your fxz files.
c. Flash the boot.img from the at&t zip.
i. Hold the shift key down and right click on the unzipped folder. Now in the dropdown menu click “open command prompt here”
ii. Now type “fastboot flash boot boot.img”
d. Flash the system.img
i. "Fastboot flash system system.img”
ii. you should be in Stock att ICS rom now.
7. Now download the file for the stock at&t Jellybean zip. ( you will be able to go back to ICS --I have gone back to stock 4.0.4 Bell ROM-- bc you’re only flashing boot and system images)
8. Now start back at step 6 but with the jelly bean leak ---- Or you can try just going to settings and checking for updates! (haven't tried this yet - don't know if it will flash something we don't want it to UPDATE: I guess it doesn't work)
9. You should be on AT&T Jellybean now - and you probably(thanks soulja) lost root...
Fastboot link: https://www.dropbox.com/s/rhlcajoerowtpiw/fastboots.zip
Stock ICS link: http://forum.xda-developers.com/showthread.php?t=1853522
Stock JB link: https://www.dropbox.com/s/65ro5ddf5mhdc9f/7.7.1Q-144_MB886_MR1-22_SIGNED_CFC.xml.zip
reserved. IF you have any questions please ask!
gabo_e30 said:
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
4. Now double check you’re unlocked.
5. Make sure you have a charged battery (more than 60%) and boot into fastboot. (if you're not already here)
Click to expand...
Click to collapse
You might want to just clarify that "adb reboot-bootloader" puts the device into fastboot. Took me a few minutes to figure that out.
gabo_e30 said:
9. You should be on Jellybean now - and you prolly lost root...
Click to expand...
Click to collapse
...probably! not "prolly"!
OK, so I think I followed the directions properly, it appears SafeStrap is gone, and I now get new boot animations, a "thumping" Motorola logo and then an AT&T Rethink Possible. But it seems to be stuck after it plays that, with the AT&T logo and "Rethink Possible" message. Help!
UPDATE: After much flailing about, I got it into Recovery mode (could only get there by adb reboot recovery, the vol up/down + pwr only gets me a white texted menu which included "factory" but didn't do anything".) Will see if this works.
UPDATE 2: YES! After the factory reset, I let it boot up again. I was about to give up and try going back to ICS, but then it went past the Rethink Possible logo to a configure phone screen.
UPDATE 3: What... OK so it thinks it's an AT&T phone now, that's OK. It also shows it connected to 4G which it never has (always E, H or H++) But it's still on 4.0.4 ICS even though I did load the JB rom. But I just checked updates and it's got 4.1.1!!
UPDATE 4: Update (98.4.20.en.US) downloaded. Hitting install now...
UPDATE 5: CRAP. After reboot "The software update failed!" I might try reflashing the file from 7.7.1Q-144_MB886_MR1-22_SIGNED_CFC
UPDATE 6: No joy. :/ Any tried flashing Blur_Version.77.12.22.MB886.ATT.en.US.zip? After the above procedure, is my phone now "really" an AT&T phone?
UPDATE 7: I followed the thread about fixing failed update http://forum.xda-developers.com/showthread.php?t=2050416, and then got the OTA update. THIS TIME IT WORKS!!! I did lose root though. Oh well. I tried motofail2go again, but I couldn't get the "bug report" vibrate to happen.
noob problem with adb
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
sorry where in PC or in motorola atrix ? need i another app ? thanks in advance
i just unlocked root with Motofail2Go
w0hnzimmer said:
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
sorry where in PC or in motorola atrix ? need i another app ? thanks in advance
Click to expand...
Click to collapse
First step is actually to get Motorola drivers installed on your PC, as well as adb tools. Sorry I don't have a link handy. Then from PC do the "adb reboot-bootloader".
Can this be done with at&t and why not ?
Seems like you can go jb > ics easily.
souljaboy said:
Can this be done with at&t and why not ?
Seems like you can go jb > ics easily.
Click to expand...
Click to collapse
Step #4 and the title to the thread.
Sent from my MB886 using xda premium
capran said:
First step is actually to get Motorola drivers installed on your PC, as well as adb tools. Sorry I don't have a link handy. Then from PC do the "adb reboot-bootloader".
Click to expand...
Click to collapse
thanks, now i got "Device is LOCKED. Status Code: 0"
any chance to unlock ?
regards
w0hnzimmer said:
thanks, now i got "Device is LOCKED. Status Code: 0"
any chance to unlock ?
regards
Click to expand...
Click to collapse
The title of this threads says "Unlocked bootloader ONLY!" You haven't unlocked it yet. Please go read up on how to do that first.
1. Root. http://forum.xda-developers.com/showthread.php?t=1940594
2. Can't seem to find the bootloader bit...
ATGAdmin said:
Step #4 and the title to the thread.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
i know...
what unlocked changes is, you can replace the kernel... but the RSDLite can replace it too, i dont quite get it.
capran said:
You might want to just clarify that "adb reboot-bootloader" puts the device into fastboot. Took me a few minutes to figure that out.
...probably! not "prolly"!
OK, so I think I followed the directions properly, it appears SafeStrap is gone, and I now get new boot animations, a "thumping" Motorola logo and then an AT&T Rethink Possible. But it seems to be stuck after it plays that, with the AT&T logo and "Rethink Possible" message. Help!
Click to expand...
Click to collapse
YOu need to do a factory reset! Sorry forgot to include that in the steps! My Bad!
UPDATE: After much flailing about, I got it into Recovery mode (could only get there by adb reboot recovery, the vol up/down + pwr only gets me a white texted menu which included "factory" but didn't do anything".) Will see if this works.
UPDATE 2: YES! After the factory reset, I let it boot up again. I was about to give up and try going back to ICS, but then it went past the Rethink Possible logo to a configure phone screen.
Click to expand...
Click to collapse
YESSS!!! you figured it out!
UPDATE 3: What... OK so it thinks it's an AT&T phone now, that's OK. It also shows it connected to 4G which it never has (always E, H or H++) But it's still on 4.0.4 ICS even though I did load the JB rom. But I just checked updates and it's got 4.1.1!!
Click to expand...
Click to collapse
Yeah 4G is the same as H+, that's just how At&t symbolizes it
UPDATE 4: Update (98.4.20.en.US) downloaded. Hitting install now...
UPDATE 5: CRAP. After reboot "The software update failed!" I might try reflashing the file from 7.7.1Q-144_MB886_MR1-22_SIGNED_CFC
Click to expand...
Click to collapse
I guess it won't work huh?... we were lucky if it did!
UPDATE 6: No joy. :/ Any tried flashing Blur_Version.77.12.22.MB886.ATT.en.US.zip? After the above procedure, is my phone now "really" an AT&T phone?
Click to expand...
Click to collapse
No it's not really an at&t phone... you can flash back the Bell 4.0.4 ROM (I just did it). Remember it will ONLY WORK IF YOU HAVE AN UNLOCKED BOOTLOADER!
UPDATE 7: I followed the thread about fixing failed update http://forum.xda-developers.com/showthread.php?t=2050416, and then got the OTA update. THIS TIME IT WORKS!!! I did lose root though. Oh well. I tried motofail2go again, but I couldn't get the "bug report" vibrate to happen.
Click to expand...
Click to collapse
Cool you found a solution...(?) But it should work with the above Jellybean file. Gonna try it out again myself!
w0hnzimmer said:
3. MAKE SURE YOU HAVE AN UNLOCKED BOOTLOADER. To do this open command prompt and type “adb reboot-bootloader” and check....
a. It should say: "Device is UNLOCKED. Status Code:1"
sorry where in PC or in motorola atrix ? need i another app ? thanks in advance
i just unlocked root with Motofail2Go
Click to expand...
Click to collapse
Ok. SO install the moto drivers first (just google them -Motocast)
Now the fastboot files and put them in the same folder or path of the system and boot.img
Now connect your phone and make sure its in debugging mode
Open command prompt (cmd) in the folder you have the files you want to install. (do this by holding shift and right click on that folder)
Now type adb reboot bootloader IN CMD. You phone should reboot into fastboot! :victory:
capran said:
The title of this threads says "Unlocked bootloader ONLY!" You haven't unlocked it yet. Please go read up on how to do that first.
1. Root. http://forum.xda-developers.com/showthread.php?t=1940594
2. Can't seem to find the bootloader bit...
Click to expand...
Click to collapse
Capran you can't install it following this procedure. It won't work or you will brick.
This si only for unlocked bootloader Atrix HDs. There's only a few of them out there (they all seem to be BELL models, but not all Bell models) I think its the ones that shipped with system version: 77.55.17.MB886.BellMobility.en.CA. TheBootloader version is 10.96 i believe... and the locked one is 10.97 I think...
souljaboy said:
i know...
what unlocked changes is, you can replace the kernel... but the RSDLite can replace it too, i dont quite get it.
Click to expand...
Click to collapse
From what I understand is that RSDlite changes it but after and Only with kernels and files that r signed (by Moto)
gabo_e30 said:
Capran you can't install it following this procedure. It won't work or you will brick.
This si only for unlocked bootloader Atrix HDs. There's only a few of them out there (they all seem to be BELL models, but not all Bell models) I think its the ones that shipped with system version: 77.55.17.MB886.BellMobility.en.CA. TheBootloader version is 10.96 i believe... and the locked one is 10.97 I think...
Click to expand...
Click to collapse
How about the 77.55.18.MB886.BellMobility.en.CA can we flash it to our unlocked Atrix hd? I saw that there's an update to JB 4.1.2. on this version. Thanks
Sent from my MB886 using xda premium
I have an unlocked Bell Atrix HD. It was running 77.55.17 and I tried this method of flashing the AT&T software using fastboot and it didn't work. I could flash the boot.img, but when I went to flash the system.img.ext4 it would tell me that I had exceeded the download buffer. So at this point I had flashed the boot.img already and the phone wouldn't boot. I actually couldn't get any system.img files to flash from fastboot, even the Bell one, always the same exceeded the download buffer error. So I downloaded RSD lite and flashed the 77.55.18 Bell firmware to it via RSD lite and I was back in business again. At this point I just said to heck with it with fastboot and then flashed the stock ICS AT&T firmware via RSD lite only having used the modified XML file that is suggested to use. This worked perfectly fine as well. I was then able to root with motofail and use voodoo to backup my root. Then I just let it do the JB update OTA and that worked perfectly fine as well and then restored my root through voodoo and verified I still had root. Everything looks fine. The funny thing is I'm selling this phone, I have a Galaxy Note II now, but I was worried if I sold it with the Bell firmware nobody would want it since it was still ICS. Should be a bonus to someone that its unlocked, and rooted already hopefully.
ryuben2k said:
How about the 77.55.18.MB886.BellMobility.en.CA can we flash it to our unlocked Atrix hd? I saw that there's an update to JB 4.1.2. on this version. Thanks
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
I used RSDlite (the latest one) to flash the 77.55.18 version on my phone.. now its the one im currently running. SO yeah you can flash it! ( i still don't have an update though) Link for teh FXZ file is in the OP (same place where the ICS at&t ROM is)
BHUGHESVA said:
I have an unlocked Bell Atrix HD. It was running 77.55.17 and I tried this method of flashing the AT&T software using fastboot and it didn't work. I could flash the boot.img, but when I went to flash the system.img.ext4 it would tell me that I had exceeded the download buffer. So at this point I had flashed the boot.img already and the phone wouldn't boot. I actually couldn't get any system.img files to flash from fastboot, even the Bell one, always the same exceeded the download buffer error. So I downloaded RSD lite and flashed the 77.55.18 Bell firmware to it via RSD lite and I was back in business again. At this point I just said to heck with it with fastboot and then flashed the stock ICS AT&T firmware via RSD lite only having used the modified XML file that is suggested to use. This worked perfectly fine as well. I was then able to root with motofail and use voodoo to backup my root. Then I just let it do the JB update OTA and that worked perfectly fine as well and then restored my root through voodoo and verified I still had root. Everything looks fine. The funny thing is I'm selling this phone, I have a Galaxy Note II now, but I was worried if I sold it with the Bell firmware nobody would want it since it was still ICS. Should be a bonus to someone that its unlocked, and rooted already hopefully.
Click to expand...
Click to collapse
Glad you worked it out! The first time I did it was from the 77.55.17 version, then I updated to at&t ICS the to JEllybean and now back to Bell ICS (77.55.18) Not sure what happened, but still glad you worked it out!
That's the great thing about the forums we can all work together in solving issues!
gabo_e30 said:
Glad you worked it out! The first time I did it was from the 77.55.17 version, then I updated to at&t ICS the to JEllybean and now back to Bell ICS (77.55.18) Not sure what happened, but still glad you worked it out!
That's the great thing about the forums we can all work together in solving issues!
Click to expand...
Click to collapse
Indeed, so glad I didn't brick it, lol. Maybe it was something wrong with the fastboot executables I used, I used the same ones I had downloaded a couple weeks ago to flash the HTC One V's that I got my kids for Christmas and not the ones linked to in the original post. It worked fine for for the One V's, not for the Atrix HD for some reason. Oh well, I just like tinkering with this stuff.
gabo_e30 said:
I used RSDlite (the latest one) to flash the 77.55.18 version on my phone.. now its the one im currently running. SO yeah you can flash it! ( i still don't have an update though) Link for teh FXZ file is in the OP (same place where the ICS at&t ROM is)
Click to expand...
Click to collapse
Thanks. Here's the link that i saw from motorola that there's an update for 77.55.18. and if someone from here can prove that they already upgrade to 4.1.2.
Thanks
https://motorola-global-en-usa.custhelp.com/app/answers/detail/a_id/92147
Sent from my MB886 using xda premium
I'm currently rooted and am running only Xposed Mods with a few root apps. How can I unroot my phone and get the stock recovery back onto my Moto X so that I can take OTA's again without wiping all of my data? What files do I need to download/flash and how do I do it? I've searched around, but it just got me even more confused.
bd1212 said:
I'm currently rooted and am running only Xposed Mods with a few root apps. How can I unroot my phone and get the stock recovery back onto my Moto X so that I can take OTA's again without wiping all of my data? What files do I need to download/flash and how do I do it? I've searched around, but it just got me even more confused.
Click to expand...
Click to collapse
Someone correct me if I'm wrong, but I believe that flashing the stock system will remove all the changes you've made with root/xposed modules, and flashing the stock recovery should essentially get rid of root (I think).
I don't know precisely where to get all the files, but if you find them around, you can push them using ADB.
If you're like me and are okay with losing everything on the phone, go ahead and use RSDLite (it requires ADB). It's easy-ish to use, and there's even a video tutorial that covers everything after installation of all the files.
You need to use fastboot to push system.img and recovery.img from the version of the OS you're currently running. See here for a list of OS images:
http://sbf.droid-developers.org/ghost_rcica/list.php
See this thread for a link to a fastboot.exe that'll work:
http://forum.xda-developers.com/showthread.php?t=2527287
See this thread for a quick overview and link to more detailed info:
http://forum.xda-developers.com/showthread.php?t=2525495&page=4
jonnythan said:
You need to use fastboot to push system.img and recovery.img from the version of the OS you're currently running. See here for a list of OS images:
http://sbf.droid-developers.org/ghost_rcica/list.php
See this thread for a link to a fastboot.exe that'll work:
http://forum.xda-developers.com/showthread.php?t=2527287
See this thread for a quick overview and link to more detailed info:
http://forum.xda-developers.com/showthread.php?t=2525495&page=4
Click to expand...
Click to collapse
Thanks for the info and links. I'm currently downloading the OS that I'm currently running (VZW OTA update in my case), but I have one question: How do I use fastboot? When I double click that .exe nothing happens.
bd1212 said:
Thanks for the info and links. I'm currently downloading the OS that I'm currently running (VZW OTA update in my case), but I have one question: How do I use fastboot? When I double click that .exe nothing happens.
Click to expand...
Click to collapse
You need to install the Android SDK and the platform tools, then boot your phone into fastboot mode. You need to run a command line to flash the IMGs. It's explained in the links.
meant2live218 said:
Someone correct me if I'm wrong, but I believe that flashing the stock system will remove all the changes you've made with root/xposed modules, and flashing the stock recovery should essentially get rid of root (I think).
I don't know precisely where to get all the files, but if you find them around, you can push them using ADB.
If you're like me and are okay with losing everything on the phone, go ahead and use RSDLite (it requires ADB). It's easy-ish to use, and there's even a video tutorial that covers everything after installation of all the files.
Click to expand...
Click to collapse
I was under the impression that we cannot do a factory reset or we won't get the soak test OTA pushed to our phones. That's what the soak test post said atleast. Something along the lines of "DO NOT FACTORY RESET or you will not receive the OTA"... don't want to quote it directly since I'm under an NDA, but it was something like that. Did I misunderstand? If I use the Moto X toolkit or RSDLite to revert back to stock is that different than a factory reset?
jonnythan said:
You need to install the Android SDK and the platform tools, then boot your phone into fastboot mode. You need to run a command line to flash the IMGs. It's explained in the links.
Click to expand...
Click to collapse
I've got the Android SDK install and ADB is setup. I'm pretty familiar with ADB. I moved the motorola fastboot.exe into platform-tools and I know how to put the phone into fastboot mode. What I don't understand is what I need to do once I've got the system.img file and the recovery.img file. I'm still reading all of the links so I might not have gotten to the part where it explains what to do, so forgive me for that.
bd1212 said:
I've got the Android SDK install and ADB is setup. I'm pretty familiar with ADB. I moved the motorola fastboot.exe into platform-tools and I know how to put the phone into fastboot mode. What I don't understand is what I need to do once I've got the system.img file and the recovery.img file.
Click to expand...
Click to collapse
Right from my third link:
Next, you need to put the phone into "fastboot mode" as described above, also make sure usb debugging is enabled in the developer menu settings. Then download the FW for your phone found (follow what i said in regards to the other persons post below), then unzip that, put the system and recovery image in the same directory that your fastboot and adb is in, then run these commands from the cmd prompt
fastboot flash system system.img
fastboot flash recovery recovery.img
then your done, you can type
fastboot reboot
Click to expand...
Click to collapse
jonnythan said:
Right from my third link:
Click to expand...
Click to collapse
Yep, just got to that part lol. Having some trouble downloading the VZW file. My current download just stopped with a network error and the website that is hosting the files keeps saying service unavailable and to contact the website administrator. Weird. I'm blaming it on my college's ****ty wireless network.
Edit: Yup, for some reason the wifi at the school decided it need me to input my credentials to re-login for the 6th time today to verify who I am and allow me internet access.
Edit 2: The things I'd do to have a stable connection... Once again, the download failed halfway through because the damn connection at this college sucks. This is infuriating.
jonnythan said:
Right from my third link:
Click to expand...
Click to collapse
Is there anyway you (or someone else) could upload the VZW OTA update file to Google Drive or Dropbox for me? This download is going way to slow to the point where I can't even finish it before my connection craps out. Or can you (or someone else) just upload the system.img and recovery.img files for me?
bd1212 said:
Is there anyway you (or someone else) could upload the VZW OTA update file to Google Drive or Dropbox for me? This download is going way to slow to the point where I can't even finish it before my connection craps out. Or can you (or someone else) just upload the system.img and recovery.img files for me?
Click to expand...
Click to collapse
Uploading now, but it'll take a bit. Big file.
jonnythan said:
Uploading now, but it'll take a bit. Big file.
Click to expand...
Click to collapse
Thanks man. You don't even know how much I appreciate this.
Which one of the two is the camera update for vzw?
Where do you get stock recovery?
EDIT: Sorry, Nevermind. I probably extract it from the zip.
Sent from my XT1060 using xda app-developers app
Hey guys, I was just wondering if anybody could help me with my bricked Nexus. I tried everything in this thread: http://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518 I could not get the blank-flash.bat to work. Here's the error I get when running it: Target ERROR: 7 - Open multi failed, unknown error
FAILED (sdl-transfer-image:send-image:sdl-open-multi:target error)
I attached a picture below of the cmd window.
If anybody could help me get past this error and help my Nexus come back to life, it would be really appreciated.
Thanks in advance!
Don't think you can use the flash.bat ... Have to extract the .img files and flash them individually
YankInDaSouth said:
Don't think you can use the flash.bat ... Have to extract the .img files and flash them individually
Click to expand...
Click to collapse
Do you think you can elaborate on that?
Do you mean extract the img files from the singleimage.bin file and flash those seperately, or do you mean something else entirely?
RealROGWaffle said:
Do you think you can elaborate on that?
Do you mean extract the img files from the singleimage.bin file and flash those seperately, or do you mean something else entirely?
Click to expand...
Click to collapse
http://androidforums.com/threads/guide-how-to-flash-a-nexus-factory-image-manually.706533/
See alternative under step 11
YankInDaSouth said:
http://androidforums.com/threads/guide-how-to-flash-a-nexus-factory-image-manually.706533/
See alternative under step 11
Click to expand...
Click to collapse
The thing is I'm not able to get into fastboot. I'm trying to flash fastboot back so I can then flash a file allocation table and bootloader.
Oh, my apologies! Completely misunderstood the OP
YankInDaSouth said:
Oh, my apologies! Completely misunderstood the OP
Click to expand...
Click to collapse
It's alright, thank you for participating
No problem ... I feel for ya, I know what you're going through. I had to return my first Nexus after I permanently soft bricked it ?
RealROGWaffle said:
The thing is I'm not able to get into fastboot. I'm trying to flash fastboot back so I can then flash a file allocation table and bootloader.
Click to expand...
Click to collapse
fastboot is a program that you run on a computer, and you have to be in your bootloader to use it. you have to install it onto your computer, and you have to have the android driver installed as well, or fastboot wont see yoir phone. you cant "flash fastboot back".
simms22 said:
fastboot is a program that you run on a computer, and you have to be in your bootloader to use it. you have to install it onto your computer, and you have to have the android driver installed as well, or fastboot wont see yoir phone. you cant "flash fastboot back".
Click to expand...
Click to collapse
I'm just trying to follow the guide listed in the OP to get my phone unbricked. The blank-flash.bat does not complete successfully therefor I am still stuck with no bootloader, fastboot, etc.
RealROGWaffle said:
I'm just trying to follow the guide listed in the OP to get my phone unbricked. The blank-flash.bat does not complete successfully therefor I am still stuck with no bootloader, fastboot, etc.
Click to expand...
Click to collapse
no bootloader? then how did you flash the blank-flash.bat? if you have no bootloader, then you have a fancy, expensive, door stop.
simms22 said:
no bootloader? then how did you flash the blank-flash.bat? if you have no bootloader, then you have a fancy, expensive, door stop.
Click to expand...
Click to collapse
I'm sure you read the thread listed in OP, or you wouldn't have posted in it. I bricked my phone. That guide explained my issue perfectly. One of the steps isn't working for me, and I'm looking for help. That's all.
RealROGWaffle said:
I'm sure you read the thread listed in OP, or you wouldn't have posted in it. I bricked my phone. That guide explained my issue perfectly. One of the steps isn't working for me, and I'm looking for help. That's all.
Click to expand...
Click to collapse
yea, ive read it, and im wishing the best of luck to you. bit you cant really do any of it without a bootliader.
so, when you press the power button, does it just stay on the google screen, or does it go into another screem?
simms22 said:
yea, ive read it, and im wishing the best of luck to you. bit you cant really do any of it without a bootliader.
so, when you press the power button, does it just stay on the google screen, or does it go into another screem?
Click to expand...
Click to collapse
There is no screen whatsoever. Just blank. Phone shows up on PC as QHUSB__BULK, but after installing Qualcomm usb drivers it shows up as Qualcomm HS-USB QDLoader 9008 (COM3). I'm stuck there as the unbrick tool does not work for me.
RealROGWaffle said:
There is no screen whatsoever. Just blank. Phone shows up on PC as QHUSB__BULK, but after installing Qualcomm usb drivers it shows up as Qualcomm HS-USB QDLoader 9008 (COM3). I'm stuck there as the unbrick tool does not work for me.
Click to expand...
Click to collapse
ok, i understand now. no bootloader and youre most likely bricked. i hope that im wrong though, good luck!
simms22 said:
ok, i understand now. no bootloader and youre most likely bricked. i hope that im wrong though, good luck!
Click to expand...
Click to collapse
Thank you
Nexus Root Toolkit of Wugfresh has an option for bricked devices.
NLBeev said:
Nexus Root Toolkit of Wugfresh has an option for bricked devices.
Click to expand...
Click to collapse
That's for soft-bricked/bootlooping devices. I have a hard-bricked Nexus.
Hi all.
I have to send my phone to RMA because of bad screen and or video chip. Can anyone help me to get the original rom of it?
Thanks.
FedericoUY said:
Hi all.
I have to send my phone to RMA because of bad screen and or video chip. Can anyone help me to get the original rom of it?
Thanks.
Click to expand...
Click to collapse
original ? you can download stock firmwares on developers.google.com/android and below look for nexus factory images.
then follow the fastboot method which is very easy.
Hehe, thank you for your fast answer. I already did that, and I doubt about some codes near the links:
.....
6.0.1 (MOB30O)
6.0.1 (MMB30R)
6.0.1 (MOB30W)
.....
I really don't know what are those codes.
FedericoUY said:
Hehe, thank you for your fast answer. I already did that, and I doubt about some codes near the links:
.....
6.0.1 (MOB30O)
6.0.1 (MMB30R)
6.0.1 (MOB30W)
.....
I really don't know what are those codes.
Click to expand...
Click to collapse
6.0.1 (MOB30W) is the latest release, that's the one you will want to download and install.
I again. I get an error when i execute the flash-all.bat from windows. Is there a way to flash all via twrp without using adb? I uncompressed image there, flashed ok bootloader, radio, but system always get an error...
Please help. Thanks.
Execute the commands manually. flash-all.bat is notorious for being flaky. However, why are we stressing here? This is a developer's device and nobody is going to care that you are rooted or that you are running a custom ROM. In short, I have yet to hear of anyone being refused warranty service because of an unlocked bootloader and custom ROM.
FedericoUY said:
I again. I get an error when i execute the flash-all.bat from windows. Is there a way to flash all via twrp without using adb? I uncompressed image there, flashed ok bootloader, radio, but system always get an error...
Please help. Thanks.
Click to expand...
Click to collapse
Download FASTBOOT and ADB ZIP , Install Drivers from 15 seconds ADB installer and then move all the extracted factory images to the fastboot containing folder and double click flash-all.bat and it'll do the job.
Links:
1. FASTBOOT & ADB..
2. 15 Sec ADB Installer[contains fastboot too].
3.Latest fastboot Images [MOB30W][6.0.1]
I ended up doing it via manual fastboot. My screen phone after being splitting screen for a long time, ended up getting a completly blurry screen. Could not find anyone that happened this same issue. Will have to send the phone to warranty. Thanks
Hey dudes,
since no one ever did this, I uploaded all Oreo Stock (retbr) for or beloved XT1789-05 released so far.
Here are the link:
https://www.dropbox.com/sh/emeuwiyaxpqqu56/AABKMNnrmMOwR5S0pBH2d7lWa?dl=0
The folder also contains RSD-lite for Mac and Linux users.
Enjoy.
if you are a Linux or Mac user and don't know how to use RSD, *I'll show you how to do with simple steps.
here we go:
1- Unzip the RSD-lite folder on your desktop;
2- Unzip the firmware zip and copy all files to the RSD folder on your desktop;
3- Open your terminal and go to the RSD-lite folder and connect your cellphone on USB with USB DEBUBBING ON;
4- Type this commands and hit ENTER after every line:
adb reboot bootloader
if you are on Linux;
bash rsd-flash.sh flashfile.xml
if you are on Mac:
./rsd-flash.sh flashfile.xml
press enter to start the flash from terminal
5- Watch for any errors. If no errors at the end of the script then press enter to reboot the device.
Many thanks to @Liboicl for the Linix script and @rootjunky for Mac script.
I'll keep adding the firmware on this folder as soon they pop up .
Does it flash to both slots? If not, this won't prepare the -05 model for AOSP ROMs. The T-Mobile flash all and Sprint ones flash to both slots via .sh or .bat files
Uzephi said:
Does it flash to both slots? If not, this won't prepare the -05 model for AOSP ROMs. The T-Mobile flash all and Sprint ones flash to both slots via .sh or .bat files
Click to expand...
Click to collapse
It flash both partitions, the script just compile all fastboot comands
darthxa said:
It flash both partitions, the script just compile all fastboot comands
Click to expand...
Click to collapse
So if you do "fastboot --set-active=_b" it will boot to system just fine?
Uzephi said:
So if you do "fastboot --set-active=_b" it will boot to system just fine?
Click to expand...
Click to collapse
As soon I get home I'll Test and do do sure
Uzephi said:
So if you do "fastboot --set-active=_b" it will boot to system just fine?
Click to expand...
Click to collapse
That's what I got
Perhaps it's because I have patched boot image in system B
But if that helped...
darthxa said:
That's what I got
Perhaps it's because I have patched boot image in system B
But if that helped...
Click to expand...
Click to collapse
That happened because the bootloader noticed slot B doesn't have Oreo firmware on it. I'll make a .sh and .bat for you in a couple of days for AOSP from the files in that zip. It will be firmware only, no system or OEM images as it will be for AOSP prep more than back to stock.
Uzephi said:
That happened because the bootloader noticed slot B doesn't have Oreo firmware on it. I'll make a .sh and .bat for you in a couple of days for AOSP from the files in that zip. It will be firmware only, no system or OEM images as it will be for AOSP prep more than back to stock.
Click to expand...
Click to collapse
Let me ask you, do you know if this particular model is eu version or America version? I'm trying install twrp ....
darthxa said:
Let me ask you, do you know if this particular model is eu version or America version? I'm trying install twrp ....
Click to expand...
Click to collapse
Installing twrp shouldn't matter the model. Just boot to twrp and flash the zip, it will edit your current boot image and not mess with any special properties like radio stuff that differ from model to model.
Hello. The new firmware has been released with the March patch NASH_OPXS27.109-34-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip. Would you kindly be able to post the link? Thanks!!!
solocchi said:
Hello. The new firmware has been released with the March patch NASH_OPXS27.109-34-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip. Would you kindly be able to post the link? Thanks!!!
Click to expand...
Click to collapse
Hi, I found it here https://plus.google.com/communities...1/stream/74c3716d-1a33-42b4-a515-63f32f4401e1, specificially in this post https://plus.google.com/111081030652026277798/posts/APCeCosyCX3 just by searching for exactly the filename you provided above with google.
Thanks for the link. I already know it but it doesn't work. I tried again and appear the message: access denied.
If you can download it and share it could be great.
solocchi said:
Thanks for the link. I already know it but it doesn't work. I tried again and appear the message: access denied.
If you can download it and share it could be great.
Click to expand...
Click to collapse
it's weird, i've got 2 pc, 1 access denied and download fine for the other
ilovemeow said:
it's weird, i've got 2 pc, 1 access denied and download fine for the other
Click to expand...
Click to collapse
I can not with any pc. If you have downloaded the firmware I would ask you kindly to post it. Thank you.
solocchi said:
I can not with any pc. If you have downloaded the firmware I would ask you kindly to post it. Thank you.
Click to expand...
Click to collapse
http://myown1gbb2.ddns.net:13955/sharing/sQf3mIAgr
password: MotoZ2ForceXT1789
ilovemeow said:
http://myown1gbb2.ddns.net:13955/sharing/sQf3mIAgr
password: MotoZ2ForceXT1789
Click to expand...
Click to collapse
Thanks!!!
darthxa said:
... for our beloved XT1789-05 ...
Click to expand...
Click to collapse
I wouldn't go as far as beloved
For me, this is actually the worst Moto phone I've ever owned (and I've owned 4 of them), specially by the price I paid for it... the phone doesn't worth not even half the price.
In fact, this is my last Moto ever, I'm done with Moto/Lenovo or any other Chinese crap for that matter.
Uzephi said:
I'll make a .sh and .bat for you in a couple of days for AOSP from the files in that zip.
Click to expand...
Click to collapse
I don't mean to push you or anything, I'm just curious if you were able to make the .bat/.sh file for this version (retbr)?
felipevsw said:
I don't mean to push you or anything, I'm just curious if you were able to make the .bat/.sh file for this version (retbr)?
Click to expand...
Click to collapse
My bat file in my thread will only work with official releases from the Motorola Firmware Team (MFT). I.E. with the official firmware and my .bat you will be able to take OTAs again. I cannot guarantee any other zips.