M2 Hard Bricked!? - Meizu M2 / M2 Mini Questions & Answers

Hi, once I tried to flash a ROM to my m2 mini, after the flash my phone shows no signs of life, if I connect it to my conputer, every second it appears and disappears, how can I fix it?

XRed_CubeX said:
Hi, once I tried to flash a ROM to my m2 mini, after the flash my phone shows no signs of life, if I connect it to my conputer, every second it appears and disappears, how can I fix it?
Click to expand...
Click to collapse
Hardbricked.Nothing can be done. Something you done gone bad. Get to service center. No other way bro.

Related

[HELP] Briked phone

Hi Guys!
Yesterday I change the Sim Card on my phone. I power off it normaly and change the SIM. When I try to boot the phone again this didn't boot.
My case is the same as in this video, but I did not try to flash the device before (In the explanation of the video, the user says that he tried to flash a custom rom, In my case it was the original rom)
I had to attach a txt with link to Youtube (sorry)
I try to Flash with Odin. Apparently Odin flash the device correctly (with de original firm). But the result is the same, don't boot.
Anyone else did the same?
Is the display turning on?
If yes, where does it hang?
If no, it's a hardbrick and your ace is dead.
Sent from my GT-S5830 using Tapatalk 2
(Frank) said:
Is the display turning on?
If yes, where does it hang?
If no, it's a hardbrick and your ace is dead.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Yes, the display turn on (same as you watch in the end on the vídeo); the device turn on the screen and then turn off (< 1 sec) and don't shown nothing (No Samung Logo or Galaxy ACE...) . But the phone boot in "downloading ..." mode and "RAMDUMP" mode.
Thanks for your reply :good:
gokuhs said:
Yes, the display turn on (same as you watch in the end on the vídeo); the device turn on the screen and then turn off (< 1 sec) and don't shown nothing (No Samung Logo or Galaxy ACE...) . But the phone boot in "downloading ..." mode and "RAMDUMP" mode.
Thanks for your reply :good:
Click to expand...
Click to collapse
Do you reach revovery? Home+power button. If yes, do a factory reset, and reboot. It should work.
If this doesen't help try flashing this firmware with odin XWKB7. It's 2.2.1 Froyo (4 files and multi-CSC, how to: http://droidangel.blogspot.hu/2011/05/samsung-galaxy-ace-s5830-original-stock.html), and after that flash a 2.3.6 firmware.
kmarci said:
Do you reach revovery? Home+power button. If yes, do a factory reset, and reboot. It should work.
Click to expand...
Click to collapse
No, the phone don't boot in recovery.
I like to try the first firmware in the first link (to hotfile) but it's down. Can you send me in a PM? Thanks!
gokuhs said:
No, the phone don't boot in recovery.
I like to try the first firmware in the first link (to hotfile) but it's down. Can you send me in a PM? Thanks!
Click to expand...
Click to collapse
I'm working right now, so I can not open a lot of sites. Use google, search for XWKB7. I guess, you will find a working link.
kmarci said:
I'm working right now, so I can not open a lot of sites. Use google, search for XWKB7. I guess, you will find a working link.
Click to expand...
Click to collapse
Yes, sorry I use google and I find them. And I flashed with Odin and he situation did not change. The phone don't boot. .
Tanks for your Replies!
i think as per your comments....your phone's hardware is damaged internally...as you have no try to flash a rom...how is it possible ? to brick a phone ? go to samsung service center and get it repaired...
asking said:
i think as per your comments....your phone's hardware is damaged internally...as you have no try to flash a rom...how is it possible ? to brick a phone ? go to samsung service center and get it repaired...
Click to expand...
Click to collapse
Yeah, maybe that's the right way. Bring it to the service, but do not tell them anything about odin and firmwares, even about sim card. Just tell them that you used the phone it suddenly stop responding than turn itself off, and since than you cannot turn it on... Or something like that.
Thanks guys!
This afternoon I will send the phone to Samsung to give me budget...
Thanks for your replies!

GT-I9305 sudden death ?

Hii there,
in the last few days my GT-I9305 was freezing a lot and i had to take out the battery and put it again to get it to work,it was rocking the 4.1.2 android and its status was normal not rooted, i thought of doing a hard reset, when i entered the digits in the numbers pad and pressed the green button it froze it took se long so i took the battery and put it again, it didn't want to boot and said that it was interrupted and gave me a button that i clicked inorder to do a hard reset,it restarted and froze onthe Galaxy S3 GT i93005 logo when i took the battery and put it again it gave me like that screen http://dl.xda-developers.com/attach.../4/6/8/6/0/2/CameraZOOM-20131222155740799.jpg but with android download mode little bit visible after restarting it it gave me the screen with nothing visible :/ what should i do ? would a flash fix it or i need a mobo replacement ? please help me
Flash cannot fix sds .
Suggest factory restore via recovery fails then its a new motherboard .
i have no idea how to factory restore via recovery fails,
can you please provide me with a link of which i can buy a mobo ?
WOWDanger said:
i have no idea how to factory restore via recovery fails,
can you please provide me with a link of which i can buy a mobo ?
Click to expand...
Click to collapse
Read this:
http://www.moroccoworldnews.com/201...rst-3rd-generation-service-center-in-morocco/

Galaxy S3 crashes!

Hello. Since 4.0 came for jelly bean i have experiencwd crashes on my phone! Let me explain:
Phone turns black and if i reboot it with the charger it gives a frozen loading circle and if i plug it out the phone starts as usual with the samsung logo WITHOUT sound!
Phone turns black and turns into boot loop until charger or battery is plugged in/taken out.
Happends with and withour charger plugged in!
Help?
Also if it helps: I8190
take out & re-insert battery, charge without switching on,
factory reset & flash firmware with odin
beerwolf-crowe said:
take out & re-insert battery, charge without switching on,
factory reset & flash firmware with odin
Click to expand...
Click to collapse
1: Didnt work. 2: Didnt work but longer battery time! 3: Didnt work! 4: Bricking risk.
linus2002pop said:
1: Didnt work. 2: Didnt work but longer battery time! 3: Didnt work! 4: Bricking risk.
Click to expand...
Click to collapse
You can't brick your phone by flashing with Odin (you've to be a complete idiot to do it). Just download an official ROM from sammobile or live.samsung-updates and flash the .md5 file as PDA in Odin
koragg97 said:
You can't brick your phone by flashing with Odin (you've to be a complete idiot to do it). Just download an official ROM from sammobile or live.samsung-updates and flash the .md5 file as PDA in Odin
Click to expand...
Click to collapse
I gave it a shot but it is still crashing! Any other ideas? Also i have found out something: If i keep my battery below 70% i wont crash. But if i get under 40% it results in boot loop.
linus2002pop said:
I gave it a shot but it is still crashing! Any other ideas? Also i have found out something: If i keep my battery below 70% i wont crash. But if i get under 40% it results in boot loop.
Click to expand...
Click to collapse
Make sure that your battery isn't damaged (if it's damaged then buy a new battery) and maybe it's a hardware problem?
xXPR0T0TYPEXx said:
Make sure that your battery isn't damaged (if it's damaged then buy a new battery) and maybe it's a hardware problem?
Click to expand...
Click to collapse
Sounds like a damaged battery to me. Try one from another S3 Mini or Ace II and see if it works.
Not a battery problem! We have tested multiple methods including the spinning one!
Also this can be either because the 4.1.2 update that seems to have broken the so called "NAND memory". Im also going to say one thing: This started happening to many S3 minis when they passed the 1 year age.
My friend also HAD this problem on his old S3 mini but he buyed an iPhone Later.

[QHsusb_Dload] How to unbrick MI3 WCDMA

Hey everyone currently experiencing this semi-bricked as it still recognized on my pc, here's details situations i faced.. Running official V6 , it stuck & freeze on MI logo, i decided to power it off, ive checked the battery before that freeze was about 53%, after that the phone won't even power up no led, try to entering recovery (no luck), trying to access fastboot mode (no luck), downloading MiflashTool and reads every tutors&articles till now nothing work, i connected to pc redlight appeared for a while, i saw that installing driver (usb input installed), then i press the whole button (power+vol-up/down its installing driver (Qhsuab_dload installed) but no luck when try to flash it with miflashtool.. I really need some help to unbrick this devices, any help&suggestions would be appreciated. Thanks
I put some pictures so you guys know what am faces
Some pictures here
Hum wow, had you resized your partitions?
I should have a sugestion, but it may not please you...
Here it is : http://en.miui.com/thread-73348-1-1.html
But before trying it just wait for other replies.
Regards and good luck.
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
SH1M4BD3 said:
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
Click to expand...
Click to collapse
How about this?
How to Unbreak Xiaomi Mi 3 (soft break) - No need to open back cover -*http://en.miui.com/thread-84669-1-1.html
No luck broo fail..ok i sold..this crap
SH1M4BD3 said:
No luck broo fail..ok i sold..this crap
Click to expand...
Click to collapse
This CRAP haha had this happend to me it is a fully bricked phone u could fix it up by opening the phone and connecting some testpoints when flashing (tutorial on miui forum).
I sent it to repair as this same thing happend to me basically the "memory block" got bricked.
You know its just not make sense, i used it normally, not even yet try to root or flashing something, its fully stock, upgrading once..i used it about 2months normal use, but suddenly facing this, come on ..
Well this is what happend when I upgraded my version of MIUI through fastboot. Not sure how u got this but that is what it means as I had this too.
Latest update i always done was an ota stable one and am sure that was recovery way

Xperia z not turn on (stuck on Sony logo)

Hello.
Short problem review. My brother used some custom rom for a while. Today he tried to install CM12,1 . He installed it by Cwm recovery. Everythink looks fine. After first start it was imposible even to unlock phone (all the time some programs stoped working...). After hard reset phone not turn on at all. It shows just SONY logo then 4seconds black screen and phone auto restart. And it never end. Is it posible that he break this phone? P.S. just one option works - fastboot mode (blue led). Sorry for poor english.
Maybe someone can give me some hints or tips what to do?
Frozen258 said:
Hello.
Short problem review. My brother used some custom rom for a while. Today he tried to install CM12,1 . He installed it by Cwm recovery. Everythink looks fine. After first start it was imposible even to unlock phone (all the time some programs stoped working...). After hard reset phone not turn on at all. It shows just SONY logo then 4seconds black screen and phone auto restart. And it never end. Is it posible that he break this phone? P.S. just one option works - fastboot mode (blue led). Sorry for poor english.
Maybe someone can give me some hints or tips what to do?
Click to expand...
Click to collapse
1. You can flash boot.img of any rom for yuga (i prefer boot.img of slimlp) through fastboot mod and after that go to recovery and install any rom.
2. You can flash stock if nothing work through flashmod.
Ess Arr said:
1. You can flash boot.img of any rom for yuga (i prefer boot.img of slimlp) through fastboot mod and after that go to recovery and install any rom.
2. You can flash stock if nothing work through flashmod.
Click to expand...
Click to collapse
i tryied to flash boot.img from this http://forum.xda-developers.com/xperia-z/orig-development/rom-slimlp-yuga-t3004439 but nothing changed
Frozen258 said:
i tryied to flash boot.img from this http://forum.xda-developers.com/xperia-z/orig-development/rom-slimlp-yuga-t3004439 but nothing changed
Click to expand...
Click to collapse
Flash boot.img again as "kernel" not as system through flashtool and restart the phone. When sony logo appears press vol up or down constantly.
Try to reprogram ?
Androidzkie said:
Try to reprogram
Click to expand...
Click to collapse
can you tell me more about this? P.S. when i connect to the charger it restarting all the time and not charging
Ess Arr said:
Flash boot.img again as "kernel" not as system through flashtool and restart the phone. When sony logo appears press vol up or down constantly.
Click to expand...
Click to collapse
after restart i see sony logo and red led on corner and mili second green led (on this it should open recovery mode, but phone restart faster and i can't get on it)
could it be battery problem (dead battery)? the reason for flashing new rom was that this phone shutdown at 82% of batery remaining. Factory settings reset didn't helped so we installed other custom rom and now it is dead. Now without charger it dont start at all ( 3 times red led and thats all). If i leave it to charge but it restart and restart.
Frozen258 said:
could it be battery problem (dead battery)? the reason for flashing new rom was that this phone shutdown at 82% of batery remaining. Factory settings reset didn't helped so we installed other custom rom and now it is dead. Now without charger it dont start at all ( 3 times red led and thats all). If i leave it to charge but it restart and restart.
Click to expand...
Click to collapse
Yep bro i seems to be like a hardware issue. Other wise try to flash the stock rom.
---------- Post added at 04:47 PM ---------- Previous post was at 04:41 PM ----------
Frozen258 said:
could it be battery problem (dead battery)? the reason for flashing new rom was that this phone shutdown at 82% of batery remaining. Factory settings reset didn't helped so we installed other custom rom and now it is dead. Now without charger it dont start at all ( 3 times red led and thats all). If i leave it to charge but it restart and restart.
Click to expand...
Click to collapse
Yep bro i seems to be like a hardware issue. Other wise try to flash the stock rom.
thank you guys for help. Problem was battery. But i have another now... while i was changing battery i crashed my xperia screen :/ . Is it worth to buy new one or phone is too old to repair it? Touch now works only on down corner but LCD looks fine.

Categories

Resources