HTC One M7 e801 bootup blankscreen - One (M7) Q&A, Help & Troubleshooting

First of all, I got my m7 unlocked and stuffs. Then my supersu keep on appearing error for stop responding
Therefore I realize maybe my supersu was too old or something based on the tutorial, the zip was older version. I flashed with update-supersu.zip , thats where my nightmare begin.
I reboot after flashing it, HTC logo bootup appear then went on blankscreen. I tried to wiped data and factory reset still the same
Next I was trying to flash full firmware thought it should bring back my m7 to life, not successful, and tried different rom(Google stock rom), it all shows
writing 'zip'...
(bootloader) adopting the signature contained in this image...
FAILED (remote: not allowed)
Click to expand...
Click to collapse
I don't know what to do anymore, what did i miss to flash any rom or simply have my m7 works again, please help.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader)
(bootloader)
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 4102mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bf7e9305
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
Click to expand...
Click to collapse

first of all, i figure out a few things here, maybe someone could help with my informations
If was planning to make it S-OFF but with Hboot 1.61 i will need to pay $25 for sunshine, X.
So the only way is that I flash stock M7_U 7.18.709.102 (HTC_Asia_TW), im not sure whats the correct way to do that. Or flash something ruu? I have no idea about that
saw from somewhere saying "if you are s on, you will have to do this seperate boot image install every time you want to flash a new rom"
what am I suppose to do? while the meantime im downloading the zip and its freaking slow, take very long (if someone got a better download website) due to the mirror
my recovery mode, fastboot and bootloader are functioning which is something im still happy for.
Please if someone could help me out

fungrian said:
first of all, i figure out a few things here, maybe someone could help with my informations
If was planning to make it S-OFF but with Hboot 1.61 i will need to pay $25 for sunshine, X.
So the only way is that I flash stock M7_U 7.18.709.102 (HTC_Asia_TW), im not sure whats the correct way to do that. Or flash something ruu? I have no idea about that
saw from somewhere saying "if you are s on, you will have to do this seperate boot image install every time you want to flash a new rom"
what am I suppose to do? while the meantime im downloading the zip and its freaking slow, take very long (if someone got a better download website) due to the mirror
my recovery mode, fastboot and bootloader are functioning which is something im still happy for.
Please if someone could help me out
Click to expand...
Click to collapse
Sometimes downloading things requires patience.
Im not sure exactly how S-ON flashing works but i did hear somewhere that something to do with boot image gets involved

I found out the best way to bring back my m7 is to use RUU method, but when i try to flash zip it shows "failed"
./fastboot-mac flash zip PN07IMG.zip
sending 'zip' (1975775 KB)...
FAILED (remote: 02 data length is too large)
Click to expand...
Click to collapse
FAILED (remote: 02 data length is too large)
maybe the RUU is not right for my phone?
Don't know whether is it i downloaded wrong rom file for my device

fungrian said:
I found out the best way to bring back my m7 is to use RUU method, but when i try to flash zip it shows "failed"
FAILED (remote: 02 data length is too large)
maybe the RUU is not right for my phone?
Don't know whether is it i downloaded wrong rom file for my device
Click to expand...
Click to collapse
You must use htc_fastboot.exe to flash a RUU if it's a Lollipop version (version starting with 7.xx.xxx.x). Others fastboot versions won't work.
---------- Post added at 08:30 AM ---------- Previous post was at 08:28 AM ----------
fungrian said:
saw from somewhere saying "if you are s on, you will have to do this seperate boot image install every time you want to flash a new rom"
Click to expand...
Click to collapse
Does not apply to the M7, the boot partition isn't write protected like previous htc devices.

Related

[SOLVED] RUU Problem

Ok, so im new here to the htc forums but not the rooting community. I previously had all nexus devices and this is my first htc/one device. I dont understand what image version im on bc when i look under Settings>About>Software Info I see Software Version - 1.29.651.10. So Why is that i cant run this RUU without any problems? Im using this guide... http://forum.xda-developers.com/showthread.php?t=2250904
I Keep getting an error at the end. heres what i did
First i flashed this.... Sprint_HTC_One_1.29.651.10_Stock_Deodexed.zip
Second... fastboot oem lock (from bootloader screen)
Third... Ran the setup.exe from this this Sprint_HTC_One_m7wls_1.29.651.10_RUU.zip
Fourth... i accepted the terms but my image version said 1.31.651.2. the image version didnt match when i ran the RUU.
at the end i get the error code 140. im posting some images so you guy can see.
in the bootloader screen i did: fastboot getvar all and got this
Last login: Tue Aug 13 21:11:14 on ttys000
MacBook-Pro:~ AbeVilla$ fastboot devices
FA35SS902798 fastboot
MacBook-Pro:~ AbeVilla$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35SS902798
(bootloader) imei: 990001468472873
(bootloader) meid: 99000146847287
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4043mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
so im am assuming that im flashed to this version of 1.29.651.10 android so to speak, but my actual image version is1.31.651.2? if i am understanding this correctly, that means i could flash any version i want but my actual bootloader is set on this1.31.651.2. So the RUU im using will not work until there is an updated version of the RUU, right? what if i was s-off? im currently s-on. would i be able to flash it back to stock if i was s-off and the image versions didnt match in the RUU? This is my first Htc devices and im felling kinda noobish.. please help.
So here is my fix..
I flashed a bone stock rom with no root found here... or restore nandroid. I usually make a nandroid backup before i flash su.zip. but anyway, after the restore i booted into the bootloader and types fastboot oem lock. then i proceeded to reboot, but my device kept booting into bootloader. i tried fastboot erase cache which didn't help. so i grabbed the firmware from this thread http://forum.xda-developers.com/showthread.php?t=2368907 . In the bootloader type...
fastboot oem reboot RUU
now you should be in a black screen with the htc logo
fastboot flash zip /navigate/to/zip/file
you will get fail the first time(pre-hboot update: please flush immediately)
just make sure your device is still in the RUU mode(black screen with htc logo, if not redo first step)
fastboot flash zip /navigate/to/zip/file
it should proceed to flash and get flash successful!
oh you might get a loading bar underneath the htc logo. this is normal. just make sure that in the terminal it said successful.
unplug and hold the power till it restarts.
now you are bone stock with stock recovery. this is the closest I've came to being stock since there currently isn't a RUU tool for the latest firmware. hope this helps. BIG THANKS TO bigdaddy619 for the input!
Techno Droid said:
Ok, so im new here to the htc forums but not the rooting community. I previously had all nexus devices and this is my first htc/one device. I dont understand what image version im on bc when i look under Settings>About>Software Info I see Software Version - 1.29.651.10. So Why is that i cant run this RUU without any problems? Im using this guide... http://forum.xda-developers.com/showthread.php?t=2250904
I Keep getting an error at the end. heres what i did
First i flashed this.... Sprint_HTC_One_1.29.651.10_Stock_Deodexed.zip
Second... fastboot oem lock (from bootloader screen)
Third... Ran the setup.exe from this this Sprint_HTC_One_m7wls_1.29.651.10_RUU.zip
Fourth... i accepted the terms but my image version said 1.31.651.2. the image version didnt match when i ran the RUU.
at the end i get the error code 140. im posting some images so you guy can see.
in the bootloader screen i did: fastboot getvar all and got this
Last login: Tue Aug 13 21:11:14 on ttys000
MacBook-Pro:~ AbeVilla$ fastboot devices
FA35SS902798 fastboot
MacBook-Pro:~ AbeVilla$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35SS902798
(bootloader) imei: 990001468472873
(bootloader) meid: 99000146847287
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4043mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
so im am assuming that im flashed to this version of 1.29.651.10 android so to speak, but my actual image version is1.31.651.2? if i am understanding this correctly, that means i could flash any version i want but my actual bootloader is set on this1.31.651.2. So the RUU im using will not work until there is an updated version of the RUU, right? what if i was s-off? im currently s-on. would i be able to flash it back to stock if i was s-off and the image versions didnt match in the RUU? This is my first Htc devices and im felling kinda noobish.. please help.
Click to expand...
Click to collapse
s-off should let you ruu any image
Techno Droid said:
Ok, so im new here to the htc forums but not the rooting community. I previously had all nexus devices and this is my first htc/one device. I dont understand what image version im on bc when i look under Settings>About>Software Info I see Software Version - 1.29.651.10. So Why is that i cant run this RUU without any problems? Im using this guide... http://forum.xda-developers.com/showthread.php?t=2250904
I Keep getting an error at the end. heres what i did
First i flashed this.... Sprint_HTC_One_1.29.651.10_Stock_Deodexed.zip
Second... fastboot oem lock (from bootloader screen)
Third... Ran the setup.exe from this this Sprint_HTC_One_m7wls_1.29.651.10_RUU.zip
Fourth... i accepted the terms but my image version said 1.31.651.2. the image version didnt match when i ran the RUU.
at the end i get the error code 140. im posting some images so you guy can see.
in the bootloader screen i did: fastboot getvar all and got this
Last login: Tue Aug 13 21:11:14 on ttys000
MacBook-Pro:~ AbeVilla$ fastboot devices
FA35SS902798 fastboot
MacBook-Pro:~ AbeVilla$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35SS902798
(bootloader) imei: 990001468472873
(bootloader) meid: 99000146847287
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4043mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
so im am assuming that im flashed to this version of 1.29.651.10 android so to speak, but my actual image version is1.31.651.2? if i am understanding this correctly, that means i could flash any version i want but my actual bootloader is set on this1.31.651.2. So the RUU im using will not work until there is an updated version of the RUU, right? what if i was s-off? im currently s-on. would i be able to flash it back to stock if i was s-off and the image versions didnt match in the RUU? This is my first Htc devices and im felling kinda noobish.. please help.
Click to expand...
Click to collapse
The Software Version - 1.29.651.10 refers to the software version of the rom you are running if you were to flash a rom based on 1.31.651.2 your software version in settings would reflect that.
Since you are s-on your phone most likely came with 1.31.651.2 why are you trying to go backwards? If you just want to go back to stock there is a stock 1.31.651.2 rom(rooted and unrooted) in Indirects thread.
bigdaddy619 said:
The Software Version - 1.29.651.10 refers to the software version of the rom you are running if you were to flash a rom based on 1.31.651.2 your software version in settings would reflect that.
Since you are s-on your phone most likely came with 1.31.651.2 why are you trying to go backwards? If you just want to go back to stock there is a stock 1.31.651.2 rom(rooted and unrooted) in Indirects thread.
Click to expand...
Click to collapse
BC I need to send it back to sprint and plus in want to learn the process so I know exactly what im doing. Is there and ruu for the version my boot loader reflects?
Sent from my One using Tapatalk 2
Techno Droid said:
BC I need to send it back to sprint and plus in want to learn the process so I know exactly what im doing. Is there and ruu for the version my boot loader reflects?
Sent from my One using Tapatalk 2
Click to expand...
Click to collapse
There is not an RUU for 1.31.651.2
I would suggest unlocking again
flash twrp 2.5.0.0
flash the Stock(no root) 1.31 rom in Indirect's thread
then relock again(your bootloader will say RE-LOCKED not LOCKED)
I kinda figured that I just had a brain fart about it. But when I flash a stock rom and relock bootloader it won't boot up I just keep booting into the bootloader. So if in was on an earlier version of 1.29.651.10 I would be able to relock and be stock, right?
Sent from my One using Tapatalk 2
Techno Droid said:
I kinda figured that I just had a brain fart about it. But when I flash a stock rom and relock bootloader it won't boot up I just keep booting into the bootloader. So if in was on an earlier version of 1.29.651.10 I would be able to relock and be stock, right?
Sent from my One using Tapatalk 2
Click to expand...
Click to collapse
Did you check the MD5 on the stock rom you were trying to flash maybe it was a bad download?
In was on it running and all. Then I proceeded and relocked. Or did I do something wrong here?
Sent from my One using Tapatalk 2
Techno Droid said:
In was on it running and all. Then I proceeded and relocked. Or did I do something wrong here?
Sent from my One using Tapatalk 2
Click to expand...
Click to collapse
Check PM
Same Issue As Techno Droid - ! SOS ! - 7 day old brick
Hi all,
I'm hoping someone can assist me here, its been a week now without my phone due to my botched attempts to flash a custom rom. I have the exact same situation as TechnoDroid's initial post, and same exact fails. I tried Techno Droids fix, but am getting the following error from this command:
fastboot oem reboot RUU
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.001s]
finished. total time: 0.003s.
I've flashed the 1.31 stock ROM from Indirect's thread, and re-locked the bootloader, but I always get an OS that has no apps and begins a system boot loop after a few minutes.
Also, if I can find a compatible nandroid backup and flash it through TWRP would that be a possible fix?
Any help is greatly appreciated, I'll be looking into purchasing a backup phone from my MVNA, but would really like to unbrick this one since I paid full boat for an unlocked version!
- cheers
dancesWitShoes said:
Hi all,
I'm hoping someone can assist me here, its been a week now without my phone due to my botched attempts to flash a custom rom. I have the exact same situation as TechnoDroid's initial post, and same exact fails. I tried Techno Droids fix, but am getting the following error from this command:
fastboot oem reboot RUU
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.001s]
finished. total time: 0.003s.
I've flashed the 1.31 stock ROM from Indirect's thread, and re-locked the bootloader, but I always get an OS that has no apps and begins a system boot loop after a few minutes.
Also, if I can find a compatible nandroid backup and flash it through TWRP would that be a possible fix?
Any help is greatly appreciated, I'll be looking into purchasing a backup phone from my MVNA, but would really like to unbrick this one since I paid full boat for an unlocked version!
- cheers
Click to expand...
Click to collapse
Check PM
BD619 said:
Check PM
Click to expand...
Click to collapse
having the same issue: stock deodexed flashed but unable to get ruu,, tsk (Sprint HTC One 1.29.651.10!)
pls help,,

[Q] I need help Please Rogers HTC One stuck in h-boot

Hi everyone,
Im kind of new to the android world and stupid for me i did things without being absolutely certain. So i have an unlocked originally Rogers Htc one and i had it under the google play edition rom with cwm recovery installed, unlocked bootloader and all that good stuff. I needed to send it in for warranty purposes so i wanted to try to put it back to stock sense 5 rom. i followed tons upon tons of videos and i ended finding an RUU that might have worked so i relocked my bootloader and followed the processes but every time i did typed the "fastboot flash zip firmware.zip" command it would go 75% of the way and then stop but in the command window it said successful. Unlocked my bootloader again but i forgot that it wipes everything so now i dont even know if i have cwm installed to flash any rom at all. So basically i think my phone is bricked :'( im crying my head off. If anyone has any input on how i can convert this htc one back to stock and working or even any custom rom just so it can work please let me know im really scared at this point. Thankyou for reading
SaadQamer said:
Hi everyone,
Im kind of new to the android world and stupid for me i did things without being absolutely certain. So i have an unlocked originally Rogers Htc one and i had it under the google play edition rom with cwm recovery installed, unlocked bootloader and all that good stuff. I needed to send it in for warranty purposes so i wanted to try to put it back to stock sense 5 rom. i followed tons upon tons of videos and i ended finding an RUU that might have worked so i relocked my bootloader and followed the processes but every time i did typed the "fastboot flash zip firmware.zip" command it would go 75% of the way and then stop but in the command window it said successful. Unlocked my bootloader again but i forgot that it wipes everything so now i dont even know if i have cwm installed to flash any rom at all. So basically i think my phone is bricked :'( im crying my head off. If anyone has any input on how i can convert this htc one back to stock and working or even any custom rom just so it can work please let me know im really scared at this point. Thankyou for reading
Click to expand...
Click to collapse
Can you still boot in bootloader?
if you can, you can flash a custom recovery (TWRP or CWM) again so you can install a custom rom.
it would be best if you can do fastboot getvar all and post the result here so everyone can have a clearer view on what RUU you need. will definitely help to help you properly.
Are you able to get into fastboot? If you can get into fastboot, you'll be able to flash a custom recovery, and then from there on you can either mount USB storage or use adb sideload to flash a rom onto your phone.
Thyankyou for responding
thanks for responding, if bootloader is the menu with fastboot and factory reset and those options then yes i can boot into that because my phone is off right now and i can hold vol. down and power to go into that. not sure how i can flash a custom rom though or even a recovery any help with that would be greatly appreciated as well. the phone is currently blinking with an orange light leaving me to assume the battery is deal so i cant even turn it on at the moment but i will post the getvar command when it does thankyou so much, by the way the phone is an htc one rogers just for clarification.
getvar
when i typed in fastboot getvar all i got this
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.631.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT34GW901697
(bootloader) imei: 354439053152296
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3760mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.064s
again any help with these will be greatly appreciated

[Q] Returning to stock for warranty repair

Hi All,
I want to return ENTIRELY to stock so that it is untraceable that I ever wasn't on stock. I have to send my phone to HTC for repair and do not want to be charged for the repairs.
I appreciate there are many threads for this, mainly this one: http://forum.xda-developers.com/showthread.php?t=2358738
However I wanted to confirm this will work for me and be untraceable. I understand I can provide you with information about my phone which may be required?
Any assistance greatly appreciated.
Jimzoaar said:
Hi All,
I want to return ENTIRELY to stock so that it is untraceable that I ever wasn't on stock. I have to send my phone to HTC for repair and do not want to be charged for the repairs.
I appreciate there are many threads for this, mainly this one: http://forum.xda-developers.com/showthread.php?t=2358738
However I wanted to confirm this will work for me and be untraceable. I understand I can provide you with information about my phone which may be required?
Any assistance greatly appreciated.
Click to expand...
Click to collapse
you can also check out my guide: http://forum.xda-developers.com/showthread.php?t=2541082
and see if that makes sense to you
Let me know if you have questions.
nkk71 said:
you can also check out my guide: http://forum.xda-developers.com/showthread.php?t=2541082
and see if that makes sense to you
Let me know if you have questions.
Click to expand...
Click to collapse
Thank you.
Currently backing up, will kick it off after. Should this be undetectable by HTC?
Jimzoaar said:
Thank you.
Currently backing up, will kick it off after. Should this be undetectable by HTC?
Click to expand...
Click to collapse
if you have s-off, you'll be able to run a full ruu (and possibly restore a nandroid backup, depending on which method you're using), and be able to remove TAMPERED set the phone to LOCKED and even go S-On, if you really insist.
==> result, the phone is 100% "out of the box"
If you are going to go S-On, please follow the guide properly, because it has to be done at a specific point in time, too soon is BAD, too late is BAD!
if you need more help, post a "fastboot getvar all" (remove IMEI and s/n), either here or in the guide and i'll help out as best i can.
nkk71 said:
if you have s-off, you'll be able to run a full ruu (and possibly restore a nandroid backup, depending on which method you're using), and be able to remove TAMPERED set the phone to LOCKED and even go S-On, if you really insist.
==> result, the phone is 100% "out of the box"
If you are going to go S-On, please follow the guide properly, because it has to be done at a specific point in time, too soon is BAD, too late is BAD!
if you need more help, post a "fastboot getvar all" (remove IMEI and s/n), either here or in the guide and i'll help out as best i can.
Click to expand...
Click to collapse
Excellent, thank you.
I am S-OFF. I will provide full details below.
Sorry, I wasn't too clear in my original question, can you also confirm that once I FULLY go back to stock (s-on included) and HTC repair it, that i can then go back to rooted with a custom ROM?
Please see details below:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.58.1700.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3942mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s
Also, just to confirm, that now I am S-off I can proceed with downgrading the HBOOT by runing the 1.44 exe?
Many thanks.
Jimzoaar said:
Excellent, thank you.
I am S-OFF. I will provide full details below.
Sorry, I wasn't too clear in my original question, can you also confirm that once I FULLY go back to stock (s-on included) and HTC repair it, that i can then go back to rooted with a custom ROM?
Click to expand...
Click to collapse
You should be able to unlock it again using HTCdev, and then rumrunner S-Off.
Jimzoaar said:
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main: 3.58.1700.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
finished. total time: 0.068s
Also, just to confirm, that now I am S-off I can proceed with downgrading the HBOOT by runing the 1.44 exe?
Many thanks.
Click to expand...
Click to collapse
Yes, you can go ahead and continue following the guide.
Best to use the CWM recovery I posted in post #7 as other versions have some issues when used in "fastboot boot CWM.img" mode.
As for the S-On part, please follow the guide exactly, you go S-Off to S-On, after the 1st successful OTA update, but BEFORE any update to 3.xx; because in 3.xx (hboot 1.55) going S-Off to S-On will result in a "tamper detected - rebooting" and TAMPERED is back.
By the way, from what I've read, the UK carriers & repair centers are very lenient, and don't really care about S-Off etc. especially if it's a hardware issue; but then again it's your decision.
nkk71 said:
You should be able to unlock it again using HTCdev, and then rumrunner S-Off.
Yes, you can go ahead and continue following the guide.
Best to use the CWM recovery I posted in post #7 as other versions have some issues when used in "fastboot boot CWM.img" mode.
As for the S-On part, please follow the guide exactly, you go S-Off to S-On, after the 1st successful OTA update, but BEFORE any update to 3.xx; because in 3.xx (hboot 1.55) going S-Off to S-On will result in a "tamper detected - rebooting" and TAMPERED is back.
By the way, from what I've read, the UK carriers & repair centers are very lenient, and don't really care about S-Off etc. especially if it's a hardware issue; but then again it's your decision.
Click to expand...
Click to collapse
Thanks for your prompt and detailed response.
Just to clarify, I presume you mean Android 3.x.x. I hope you understand me questioning this because obviously the HTC one was shipped with Android4.0+. Am I right in querying whether this is still going to work?
Many thanks.
Jimzoaar said:
Thanks for your prompt and detailed response.
Just to clarify, I presume you mean Android 3.x.x. I hope you understand me questioning this because obviously the HTC one was shipped with Android4.0+. Am I right in querying whether this is still going to work?
Many thanks.
Click to expand...
Click to collapse
no, 3.x.x refers to the software number, not the android version. If ur going to complete stock and if u are gonna change S-OFF TO S-ON, then change it to S-ON bfor u install the 4.3 update. Preferably, as soon as the RUU restore completes, do the S-ON procedure first.
nkk71, i would appreciate your help as well if you could help me to identify which RUU to download because I am really confused with so many versions of RUU. I would like to go back to stock to claim warranty on the camera's purple tint issue. BTW, im running on TWRP recovery.
Thank you in advance.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.707.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35WW9*****
(bootloader) imei: 3558590502*****
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4142mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
raghav kapur said:
no, 3.x.x refers to the software number, not the android version. If ur going to complete stock and if u are gonna change S-OFF TO S-ON, then change it to S-ON bfor u install the 4.3 update. Preferably, as soon as the RUU restore completes, do the S-ON procedure first.
Click to expand...
Click to collapse
Where can I check this? I am patient and will gladly check at multiple steps to ensure I am doing it at the correct one.
Also, I will be using the CWM nandroid method, can you confirm you mean after step one when I have installed the Sense 5 RUU?
nkk71 said:
if you have s-off, you'll be able to run a full ruu (and possibly restore a nandroid backup, depending on which method you're using), and be able to remove TAMPERED set the phone to LOCKED and even go S-On, if you really insist.
==> result, the phone is 100% "out of the box"
If you are going to go S-On, please follow the guide properly, because it has to be done at a specific point in time, too soon is BAD, too late is BAD!
if you need more help, post a "fastboot getvar all" (remove IMEI and s/n), either here or in the guide and i'll help out as best i can.
Click to expand...
Click to collapse
Please see below response when trying to flash the 1.44 HBoot (this is with s-off)
Do you have any ideas?
C:\Users\james.mildren>fastboot flash zip C:\Users\james.mildren\Desktop\1.29.401.12_hboot_1.44.zip
target reported max download size of 1526722560 bytes
sending 'zip' (501 KB)...
OKAY [ 0.246s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 0.732s
Jimzoaar said:
Where can I check this? I am patient and will gladly check at multiple steps to ensure I am doing it at the correct one.
Also, I will be using the CWM nandroid method, can you confirm you mean after step one when I have installed the Sense 5 RUU?
Click to expand...
Click to collapse
see, you will be able to check this only once ur RUU restore is complete. Once u can boot into the stock firmware, go to Settings-About-Software Information-Software Number.
---------- Post added at 07:16 PM ---------- Previous post was at 07:13 PM ----------
hmgan said:
nkk71, i would appreciate your help as well if you could help me to identify which RUU to download because I am really confused with so many versions of RUU. I would like to go back to stock to claim warranty on the camera's purple tint issue. BTW, im running on TWRP recovery.
Thank you in advance.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.707.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35WW911268
(bootloader) imei: 355859050240456
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4142mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
go to this link http://www.htc1guru.com/dld/ruu_m7_..._10-30-1131-05_release_309365_signed_2_4-exe/
Jimzoaar said:
Please see below response when trying to flash the 1.44 HBoot (this is with s-off)
Do you have any ideas?
C:\Users\james.mildren>fastboot flash zip C:\Users\james.mildren\Desktop\1.29.401.12_hboot_1.44.zip
target reported max download size of 1526722560 bytes
sending 'zip' (501 KB)...
OKAY [ 0.246s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 0.732s
Click to expand...
Click to collapse
yes, no problem, just change CID (you're going to have to do it anyway for the RUU):
fastboot oem writecid HTC__001 <- two underscores
fastboot reboot-bootloader
then downgrade hboot will work just fine.
nkk71 said:
yes, no problem, just change CID (you're going to have to do it anyway for the RUU):
fastboot oem writecid HTC__001 <- two underscores
fastboot reboot-bootloader
then downgrade hboot will work just fine.
Click to expand...
Click to collapse
I am now recieving the below after changing CID to HTC__001, thank you for your previous response, any ideas on this?
C:\Users\james.mildren>fastboot flash zip C:\Users\james.mildren\Desktop\1.29.401.12_hboot_1.44.zip
target reported max download size of 1526722560 bytes
sending 'zip' (501 KB)...
OKAY [ 0.247s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.284s
Jimzoaar said:
Thanks for your prompt and detailed response.
Just to clarify, I presume you mean Android 3.x.x. I hope you understand me questioning this because obviously the HTC one was shipped with Android4.0+. Am I right in querying whether this is still going to work?
Many thanks.
Click to expand...
Click to collapse
I'm referring to the base version, which starts at
1.xx (for Android 4.1.2)
2.xx (for Android 4.2.2)
3.xx (for Android 4.3)
---------- Post added at 05:21 PM ---------- Previous post was at 05:20 PM ----------
Jimzoaar said:
I am now recieving the below after changing CID to HTC__001, thank you for your previous response, any ideas on this?
Click to expand...
Click to collapse
didnt see any output.
---------- Post added at 05:27 PM ---------- Previous post was at 05:21 PM ----------
Jimzoaar said:
I am now recieving the below after changing CID to HTC__001, thank you for your previous response, any ideas on this?
C:\Users\james.mildren>fastboot flash zip C:\Users\james.mildren\Desktop\1.29.401.12_hboot_1.44.zip
target reported max download size of 1526722560 bytes
sending 'zip' (501 KB)...
OKAY [ 0.247s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.284s
Click to expand...
Click to collapse
have you "fastboot oem rebootRUU"?
Don't want to sound nasty or anything, but please make sure you've read through the guide once or twice (including post #7 which has command outputs and examples).
nkk71 said:
I'm referring to the base version, which starts at
1.xx (for Android 4.1.2)
2.xx (for Android 4.2.2)
3.xx (for Android 4.3)
---------- Post added at 05:21 PM ---------- Previous post was at 05:20 PM ----------
didnt see any output.
---------- Post added at 05:27 PM ---------- Previous post was at 05:21 PM ----------
have you "fastboot oem rebootRUU"?
Don't want to sound nasty or anything, but please make sure you've read through the guide once or twice (including post #7 which has command outputs and examples).
Click to expand...
Click to collapse
Not nasty at all, believe it or not I actually work in IT support and understand your frustrations when people don't listen. A small note though, obviously I seem to have hit a stumbling block on most steps, I know this sounds incredibly noobish, but also that is what these guides are aimed at, it may be reiterating that you either need to be in or re enter the RUU mode for certain steps, as obviously applying different fixes to bespoke problems leaves you in a different place to the guide which relys on it going smoothly.
Anyway, you are a genius, as expected, and that has worked. I will let you know of any more issues, thank you again for your help.
Jimzoaar said:
Not nasty at all, believe it or not I actually work in IT support and understand your frustrations when people don't listen. A small note though, obviously I seem to have hit a stumbling block on most steps, I know this sounds incredibly noobish, but also that is what these guides are aimed at, it may be reiterating that you either need to be in or re enter the RUU mode for certain steps, as obviously applying different fixes to bespoke problems leaves you in a different place to the guide which relys on it going smoothly.
Anyway, you are a genius, as expected, and that has worked. I will let you know of any more issues, thank you again for your help.
Click to expand...
Click to collapse
no problem, let me know how everything goes.
Good luck and remember not to rush things
nkk71 said:
no problem, let me know how everything goes.
Good luck and remember not to rush things
Click to expand...
Click to collapse
So I have now changed my CID and flashed CWM recovery, when trying to push the backup i get the follow:
C:\Users\james.mildren>adb push c:\users\james.mildren\desktop\2013-04-20.21.00.
00 /data/media/clockwordmod/backup/2013-04-20.21.00.00
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
C:\Users\james.mildren>adb push c:\users\james.mildren\desktop\2013-04-20.21.00.
00 /data/media/clockwordmod/backup/2013-04-20.21.00.00
push: c:\users\james.mildren\desktop\2013-04-20.21.00.00/system.ext4.tar.b -> /d
ata/media/clockwordmod/backup/2013-04-20.21.00.00/system.ext4.tar.b
failed to copy 'c:\users\james.mildren\desktop\2013-04-20.21.00.00/system.ext4.t
ar.b' to '/data/media/clockwordmod/backup/2013-04-20.21.00.00/system.ext4.tar.b'
: No such file or directory
Any ideas?
Jimzoaar said:
So I have now changed my CID and flashed CWM recovery, when trying to push the backup i get the follow:
C:\Users\james.mildren>adb push c:\users\james.mildren\desktop\2013-04-20.21.00.
00 /data/media/clockwordmod/backup/2013-04-20.21.00.00
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
C:\Users\james.mildren>adb push c:\users\james.mildren\desktop\2013-04-20.21.00.
00 /data/media/clockwordmod/backup/2013-04-20.21.00.00
push: c:\users\james.mildren\desktop\2013-04-20.21.00.00/system.ext4.tar.b -> /d
ata/media/clockwordmod/backup/2013-04-20.21.00.00/system.ext4.tar.b
failed to copy 'c:\users\james.mildren\desktop\2013-04-20.21.00.00/system.ext4.t
ar.b' to '/data/media/clockwordmod/backup/2013-04-20.21.00.00/system.ext4.tar.b'
: No such file or directory
Any ideas?
Click to expand...
Click to collapse
1- you mean booted into CWM not "flashed CWM recovery" right!!
2- are you using CWM 6.0.4.5 (the one i suggested in post 7), other versions have some issues with certain adb commands in "boot" mode
3- try updating adb & fastboot: http://goo.gl/T6InE
4- I recommend you put all files & folders in a short path, such as "C:\ADB" that would avoid long filename problems
try those and let me know
nkk71 said:
1- you mean booted into CWM not "flashed CWM recovery" right!!
2- are you using CWM 6.0.4.5 (the one i suggested in post 7), other versions have some issues with certain adb commands in "boot" mode
3- try updating adb & fastboot: http://goo.gl/T6InE
4- I recommend you put all files & folders in a short path, such as "C:\ADB" that would avoid long filename problems
try those and let me know
Click to expand...
Click to collapse
1 - Sorry, yes I did try the original way (booting into CWM not flashing) and when i got the aforementioned error I tried flashing, for your info I have now reflashed TWRP and am using CWM only to boot from.
2 - No I wasnt, I was user 6.0.4.6, I have now downgraded and still receive the same error.
3 - Fully updated
4- I am for the most part using my desktop, I know it just leads to more chance of an error but I have made sure there are no typos.
Just a quick query, I cannot perform the adb push when in CWM recovery....is that right? When I am in CWM my HTC does not show on the list of attached devices either. I have to boot into system before the push returns the above error, is that correct?

[Q] Bricked my HTC one ( S-ON),Tried many methods still doesn't work

The cidnumber of my phone is : VODAP021 and it is a s-on rooted phone.
Yesterday I just root my HTC one followed the steps on the htcdev website. And then didn't check the status of my phone( s-on or s-off). After installing a custom ROM , The HTC one strike on the HTC screen and rebooted again and agin.
I have tried many methods like relock the phone and flash the ruu rom , but no matter how many times I tried, it is failed on the step of signature
checking. I post the output below :
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
PS:
I really download the zip from the htc1guru website and use the command :
fastboot oem rebootRUU
fastboot flash zip
.
Thank you guys first cause this is the first time I post thread here.
yimuxia said:
The cidnumber of my phone is : VODAP021 and it is a s-on rooted phone.
Yesterday I just root my HTC one followed the steps on the htcdev website. And then didn't check the status of my phone( s-on or s-off). After installing a custom ROM , The HTC one strike on the HTC screen and rebooted again and agin.
I have tried many methods like relock the phone and flash the ruu rom , but no matter how many times I tried, it is failed on the step of signature
checking. I post the output below :
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
PS:
I really download the zip from the htc1guru website and use the command :
fastboot oem rebootRUU
fastboot flash zip
.
Thank you guys first cause this is the first time I post thread here.
Click to expand...
Click to collapse
Which ruu are you tring to flash? Afaik there is no RUU availabe for vodap021
your bootloop issue is probably because you have flashed an incompatible rom or because you have flashed a rom with the wrong recovery version.
please answer all questions below
What rom have you tried to flash? (name, version and link)
What recovery are you using (name and version)
post the output of "fastboot getvar all" minus the IMEI and SERIALNO
What RUU are you trying to flash?
Sorry for late replying
alray said:
Which ruu are you tring to flash? Afaik there is no RUU availabe for vodap021
your bootloop issue is probably because you have flashed an incompatible rom or because you have flashed a rom with the wrong recovery version.
please answer all questions below
What rom have you tried to flash? (name, version and link)
What recovery are you using (name and version)
post the output of "fastboot getvar all" minus the IMEI and SERIALNO
What RUU are you trying to flash?
Click to expand...
Click to collapse
Sorry for the late replying, I was working before. - -# .
1: Firstly after rooting my HTC one , I tried CM rom for HTC one (cm-10.2.1-m7ul.zip).
The phone rebooted itself again and again and failed to enter the system.
Then I searched on xda and tried Guru Reset M7 2.24.980.2 followed others instruction. The ruu is from the website of htc1guru(sorry I am still not able to post outside links)
2: The recovery I am using is : openrecovery-twrp-2.7.1.1-m7.img And enter my recovery on my phone, I can see the information below:
CLockworkMod Recovery v6.0.3.3
3: Below is the information by using fastboot getvar all commnd:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.980.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: minus XD
(bootloader) imei: minus XD
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: VODAP021
(bootloader) battery-status: good
(bootloader) battery-voltage: 3850mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I am so glad you guys reply me .I just get the phone three days before - - #.
need help
need help , Still cant open my phone yet~
yimuxia said:
need help , Still cant open my phone yet~
Click to expand...
Click to collapse
not sure what you want to accomplish, but if you just want to get your phone up and running for now
grab a ROM from the Development section
flash correct recovery, push the rom, and install it; instructions inthe Frequently Asked Question sticky on page 3
nkk71 said:
not sure what you want to accomplish, but if you just want to get your phone up and running for now
grab a ROM from the Development section
flash correct recovery, push the rom, and install it; instructions inthe Frequently Asked Question sticky on page 3
Click to expand...
Click to collapse
Thank you for replying , I will try this first after work today !
thank you !

[Q] (Q) Lollipop soft brick help please

Hi all,
My friend handed me his HTC One M7 the other day and it was looping at the beginning Android / HTC screen from boot, he took the lollipop update but it failed somewhere along the way and this is how it's ended up.
The device is not rooted and is not bootloader unlocked, i've tried to flash a few RUU files to bring it back to life but the vast majority of them only get as far as 1/5 checking header.
I'm more than happy to root the device and install a custom rom but I wasn't sure if it needed to be bootable to do so, afaik the bootloader unlocking doesn't require to have the device on, infact I don't think you need to have the OS to get a custom recovery either? Anyway, i'd like for him to retain his warranty so if there's a way for him to get it back to stock HTC then i'd prefer to do that.
If that's not possible and unlocking the bootloader, installing a custom rom is then I'll do that.
Any help would be greatly appreciated.
Many thanks.
PS: I have had the m7 before but I didn't have it when android 5 was available so i'm a little out of touch with what may go wrong.
dladz said:
Hi all,
My friend handed me his HTC One M7 the other day and it was looping at the beginning Android / HTC screen from boot, he took the lollipop update but it failed somewhere along the way and this is how it's ended up.
The device is not rooted and is not bootloader unlocked, i've tried to flash a few RUU files to bring it back to life but the vast majority of them only get as far as 1/5 checking header.
I'm more than happy to root the device and install a custom rom but I wasn't sure if it needed to be bootable to do so, afaik the bootloader unlocking doesn't require to have the device on, infact I don't think you need to have the OS to get a custom recovery either? Anyway, i'd like for him to retain his warranty so if there's a way for him to get it back to stock HTC then i'd prefer to do that.
If that's not possible and unlocking the bootloader, installing a custom rom is then I'll do that.
Any help would be greatly appreciated.
Many thanks.
PS: I have had the m7 before but I didn't have it when android 5 was available so i'm a little out of touch with what may go wrong.
Click to expand...
Click to collapse
Connect the phone to your computer, Boot it in bootloader mode select "fastboot" mode and make sure "fastboot usb" is shown in red. Open a fastboot command prompt:
Code:
fastboot getvar all
post the output here but make sure to hide the imei and serialno before posting.
Thanks mate I'm in bed at the moment but will do after work tomorrow,, Appreciate your help, im guessing this is to see what firmware is installed? Or hboot? I'll come back tomorrow, Many thanks.
dladz said:
Thanks mate I'm in bed at the moment but will do after work tomorrow,, Appreciate your help, im guessing this is to see what firmware is installed? Or hboot? I'll come back tomorrow, Many thanks.
Click to expand...
Click to collapse
Firmware, hboot, CID, MID, S-ON/S-OFF, M7_UL/M7_U
Checking header 1/5..ill give you a clue...your ruu that you going to flash,it has to match firmware that is on it now...as you are s-on,you cant change firmware.so,try with other ruu's,some that maches firmware number..not older,not newer.
And like others said,give them "getvar all" info.
Sent from my HTC One using XDA Free mobile app
Chaps you are both legends, I'm just running round getting ready for work. I'll jump on this when I get home. Appreciate your help. Thanks.
alray said:
Connect the phone to your computer, Boot it in bootloader mode select "fastboot" mode and make sure "fastboot usb" is shown in red. Open a fastboot command prompt:
Code:
fastboot getvar all
post the output here but make sure to hide the imei and serialno before posting.
Click to expand...
Click to collapse
C:\ANDROID SDK\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA385W909506
(bootloader) imei: -
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: low
(bootloader) battery-voltage: 3596mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
Here you go mate.
currently downloading this https://www.androidfilehost.com/?fid=95832962473396760 it's for version 6.09.401.11 which was listed.
Unless there's something i'm supposed to do.
dladz said:
C:\ANDROID SDK\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA385W909506
(bootloader) imei: -
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: low
(bootloader) battery-voltage: 3596mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
Here you go mate.
currently downloading this https://www.androidfilehost.com/?fid=95832962473396760 it's for version 6.09.401.11 which was listed.
Unless there's something i'm supposed to do.
Click to expand...
Click to collapse
Would recommend to simply flash the latest ruu (7.19.401.2) which will fix and update the phone to the latest version.
Instructions and file here: http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
alray said:
Would recommend to simply flash the latest ruu (7.19.401.2) which will fix and update the phone to the latest version.
Instructions and file here: http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Click to expand...
Click to collapse
I did actually try that one mate, that's how i got the 1/5 checking headers problem, and it simply doesn't go any further, i'll give it another whirl but as far as i can remember it was that version.
brb after checking.
Actually I didn't flash one of these but the version does ring a bell. Downloading now mate.
The previous one i mentioned i flash via fastboot flash zip but it still loops, 20 mins until that one downloads. Will let you know and thank you by the way.
dladz said:
I did actually try that one mate, that's how i got the 1/5 checking headers problem, and it simply doesn't go any further, i'll give it another whirl but as far as i can remember it was that version.
brb after checking.
Actually I didn't flash one of these but the version does ring a bell. Downloading now mate.
Click to expand...
Click to collapse
Im almost sure you were trying to flash the 4.xx.401.x version not the one I have linked above.
alray said:
Im almost sure you were trying to flash the 4.xx.401.x version not the one I have linked above.
Click to expand...
Click to collapse
I flashed this one https://www.androidfilehost.com/?fid=95832962473396760 which is 6.09.401.11 but it didn't work, not to worry anyway, i'll give the one you linked to a whirl too, just waiting for it to download, 10 mins left.
dladz said:
i'll give the one you linked to a whirl too, just waiting for it to download, 10 mins left.
Click to expand...
Click to collapse
I'm 100% confident it will work. Just make sure to use the fastboot version linked in that thread which is a version made by HTC. Only this version of fastboot will work to flash this ruu since the "normal" fastboot can't handle the file size of that ruu. Also make sure your bootloader is locked or relocked.
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot reboot
alray said:
I'm 100% confident it will work. Just make sure to use the fastboot version linked in that thread which is a version made by HTC. Only this version of fastboot will work to flash this ruu since the "normal" fastboot can't handle the file size of that ruu. Also make sure your bootloader is locked or relocked.
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot reboot
Click to expand...
Click to collapse
Oh really? Why didn't i know this !? See I've been gone from HTC for far too long, should be getting the M9 soon though. One of my contracts expires soon, i've got a few, need to check on them. You thinking of getting the M9 ? Think Samsung has made a mistake going with the Exynos.
Ok it's downloaded, i'll grab that fastboot and give it a whirl. Fingers crossed.
alray said:
I'm 100% confident it will work. Just make sure to use the fastboot version linked in that thread which is a version made by HTC. Only this version of fastboot will work to flash this ruu since the "normal" fastboot can't handle the file size of that ruu. Also make sure your bootloader is locked or relocked.
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot reboot
Click to expand...
Click to collapse
Ok i got this
C:\HTC Fastboot>fastboot oem rebootRUU
... (bootloader) Start Verify: 3
OKAY
Execution time is 44(ms)
C:\HTC Fastboot>fastboot flash zip PN07IMG_M7_U_L50_SENSE60_MR_HTC_Europe_7.19.4
01.102_Radio_4T.35.3218.16_10.33Q.1718.01D_release_421804_signed.zip
sending 'zip'... (43287 KB) OKAY
sending time = 2.844 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAIL41 model id check fail
FAILED (remote: 41 model id check fail)
Execution time is 9(s)
C:\HTC Fastboot>
Rebooting.
EDIT: Bootloop mate.
dladz said:
Oh really? Why didn't i know this !? See I've been gone from HTC for far too long, should be getting the M9 soon though. One of my contracts expires soon, i've got a few, need to check on them. You thinking of getting the M9 ? Think Samsung has made a mistake going with the Exynos.
Click to expand...
Click to collapse
I'll might grab the M9 later this year when the price will drop a bit. I'm still satisfied with my M7 and doesn't feel like I need something more.
Ok it's downloaded, i'll grab that fastboot and give it a whirl. Fingers crossed
Click to expand...
Click to collapse
Dont forget you'll need the dll files in the same folder where you have htc's fastboot and the ruu. You can simply replace fastboot.exe with htc's fastboot in your sdk folder were the required dll files are
---------- Post added at 12:16 PM ---------- Previous post was at 12:14 PM ----------
dladz said:
Ok i got this
C:\HTC Fastboot>fastboot oem rebootRUU
... (bootloader) Start Verify: 3
OKAY
Execution time is 44(ms)
C:\HTC Fastboot>fastboot flash zip PN07IMG_M7_U_L50_SENSE60_MR_HTC_Europe_7.19.4
01.102_Radio_4T.35.3218.16_10.33Q.1718.01D_release_421804_signed.zip
sending 'zip'... (43287 KB) OKAY
sending time = 2.844 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAIL41 model id check fail
FAILED (remote: 41 model id check fail)
Execution time is 9(s)
C:\HTC Fastboot>
Click to expand...
Click to collapse
you have downloaded the 7.19.401.102 version. You have to use the 7.19.401.2 version hence why the "check ID fail". .102 version is for M7_U and .2 version is for M7_UL (the one you have).
alray said:
Would recommend to simply flash the latest ruu (7.19.401.2)
Click to expand...
Click to collapse
alray said:
you have downloaded the 7.19.401.102 version. You have to use the 7.19.401.2 version hence why the "check ID fail". .102 version is for M7_U and .2 version is for M7_UL (the one you have).
Click to expand...
Click to collapse
Just copied the HTC fastboot into the SDK platforms and tools folder, reflashing now.
dladz said:
Just copied the HTC fastboot into the SDK platforms and tools folder, reflashing now.
Click to expand...
Click to collapse
read my post above you are flashing the wrong ruu. You need 4.19.401.2 not 4.19.401.102
alray said:
you have downloaded the 7.19.401.102 version. You have to use the 7.19.401.2 version hence why the "check ID fail". .102 version is for M7_U and .2 version is for M7_UL (the one you have).
Click to expand...
Click to collapse
Ah, idiot. Sorry
Couldn't see a european one though? This device is unlocked, wouldn't it have the providers software on otherwise?
Ok downloading, sorry mate, my eyes are failing me, getting old.
Ok so I think it's all done mate, looks like it's going to load up, I mean the script has finished running but the green bar is still onscreen.

Categories

Resources