Database Develop

how to flash this

http://motofirmware.com/files/file/949-retuglb-xt1063-444-kxb2185-23-cid9-cfcxmlzip/

Kobro said:
http://motofirmware.com/files/file/949-retuglb-xt1063-444-kxb2185-23-cid9-cfcxmlzip/
Click to expand...
Click to collapse
Download Minimal ADB and Fastboot and install it.
start "Minimal ADB and Fastboot" by navigating to the Start Menu Folder you choose to create during installation or the desktop shortcut you choose to create and select "Minimal ADB and Fastboot"
You should now see a command window open.
Put your device in fastboot mode and connect usb.
Now just do verify type this command
Code:
fastboot devices
the output should show something like this (your number is different)
Code:
fastboot devices
ZX1D225X69fastboot
now extract your .zip into the directory where your command window is open and start flashing
Code:
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
reboot device

doppelhelix said:
Download Minimal ADB and Fastboot and install it.
start "Minimal ADB and Fastboot" by navigating to the Start Menu Folder you choose to create during installation or the desktop shortcut you choose to create and select "Minimal ADB and Fastboot"
You should now see a command window open.
Put your device in fastboot mode and connect usb.
Now just do verify type this command
Code:
fastboot devices
the output should show something like this (your number is different)
Code:
fastboot devices
ZX1D225X69fastboot
now extract your .zip into the directory where your command window is open and start flashing
Code:
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
reboot device
Click to expand...
Click to collapse
do i have to erase data at the end?

Kobro said:
do i have to erase data at the end?
Click to expand...
Click to collapse
Not necessarily. You can try without wiping userdata. I have my stuff, like pictures, music etc on the external sdcard and backed up my apps with Titanium Backup so I can always do a full wipe.

doppelhelix said:
Not necessarily. You can try without wiping userdata. I have my stuff, like pictures, music etc on the external sdcard and backed up my apps with Titanium Backup so I can always do a full wipe.
Click to expand...
Click to collapse
well, i tried without the wipe, and after boot i got a black screen so i did it again with wipe and it worked!

[HELP]Moto G hard bricked

Hello guys
Today morning i was on cyanogenmod11 and after some time i decided to restore back to stock Lollipop so i restored a backup of Lollipop system image and suddenly a error poped up saying unable to mount /data /system
I thought this might me minor issue then i tried using fastboot to flash the stock lollipop images
When i started the flashing process i got some serious errors on my cmd
"Failed to erase partition"
"failed to write partition"
And for now only Fastboot Mode is working with UTAG "flashfail" error
i tried to flash recovery images and partition gpt file but no luck looks like my partitions are messed up bad
have a look at my attachments :crying:

any help would be appreciated

Hello ?anyone there?
Sent from my GT-S5830i using XDA Free mobile app

haytham.kenway said:
Hello ?anyone there?
Click to expand...
Click to collapse
Be patient. Not everybody lives in the same timezone. Your posted at 2.32am cet.
gpt.bin and motoboot.img can't be flashed if the version on the device is the same or higher version.
Just ignore these two.
Code:
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
That should do it.

doppelhelix said:
Be patient. Not everybody lives in the same timezone. Your posted at 2.32am cet.
gpt.bin and motoboot.img can't be flashed if the version on the device is the same or higher version.
Just ignore these two.
Code:
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
That should do it.
Click to expand...
Click to collapse
i followed as u said,executed first command and got "FAILED <Remote failure>"
rest all got same errors as posted in above post

haytham.kenway said:
i followed as u said,executed first command and got "FAILED <Remote failure>"
rest all got same errors as posted in above post
Click to expand...
Click to collapse
Sometimes it's the fastboot version. Try this:
Download Minimal ADB and Fastboot and install it.
start "Minimal ADB and Fastboot" by navigating to the Start Menu Folder you choose to create during installtion or the desktop shortcut you choose to create and selecting "Minimal ADB and Fastboot"
You should now see a command window open.
Put your device in fastboot mode and connect usb.
Now just do verify type this command
Code:
fastboot devices
the output should show something like this (your number is different)
Code:
fastboot devices
ABC99999999 fastboot
now copy the images into the directory where your command window is open and start flashing.

doppelhelix said:
Sometimes it's the fastboot version. Try this:
Download Minimal ADB and Fastboot and install it.
start "Minimal ADB and Fastboot" by navigating to the Start Menu Folder you choose to create during installtion or the desktop shortcut you choose to create and selecting "Minimal ADB and Fastboot"
You should now see a command window open.
Put your device in fastboot mode and connect usb.
Now just do verify type this command
Code:
fastboot devices
the output should show something like this (your number is different)
Code:
fastboot devices
ABC99999999 fastboot
now copy the images into the directory where your command window is open and start flashing.
Click to expand...
Click to collapse
dude i know how to flash these images,and i tried latest version of fastboot from google still problem persists

Problem installing not incremental ROM

Well I have tried to install MIUI ROM 6.5.26 after not processing updates for months (since november).
So I downloaded latest ROM and put it to the top of the partitions and then I wiped everything and that's where i might have done a mistake: I wiped internal storage (inside TWRP 2.8.7 i found there http://forum.xda-developers.com/mi-...timizing-leo-miui-advanced-tweaks-to-t3286972) then I might have might done a second mistake: I have done the command fastboot 'flash boot boot.img' as I read on an old HTC forum.
Then I pushed the latest ROM to the phone (as it was not there after the wipes) and when I tried installing it, it gave E: unable to mount 'cache' .
Now it seems i cannot enter TWRP, only Fastboot or I am stuck with MI logo.
I just want to install latest ROM, as I have done Titanium Backup before all the mess.
I don't know where i should start.

I am on mac so cannot use Mi Flash

EMJI79 said:
Well I have tried to install MIUI ROM 6.5.26 after not processing updates for months (since november).
So I downloaded latest ROM and put it to the top of the partitions and then I wiped everything and that's where i might have done a mistake: I wiped internal storage (inside TWRP 2.8.7 i found there http://forum.xda-developers.com/mi-...timizing-leo-miui-advanced-tweaks-to-t3286972) then I might have might done a second mistake: I have done the command fastboot 'flash boot boot.img' as I read on an old HTC forum.
Then I pushed the latest ROM to the phone (as it was not there after the wipes) and when I tried installing it, it gave E: unable to mount 'cache' .
Now it seems i cannot enter TWRP, only Fastboot or I am stuck with MI logo.
I just want to install latest ROM, as I have done Titanium Backup before all the mess.
I don't know where i should start.
Click to expand...
Click to collapse
you wiped internal sd so you have nothing the only way to solve is
Download the fastboot ROM https://www.dropbox.com/s/dg198q49dctzfgr/leo_images_5.11.26_20151104.0000.4_5.1_cn.tar.gz?dl=0 (recomend this others from this year locked bootloader)
Extract it to the same directory you extracted ADB/Fastboot
Press "Windows key + X" -> "Command Prompt (administrator)
In command prompt, go to your folder where your ADB/Fastboot are, assuming they are in C:\Fastboot, you type
> cd C:\Fastboot
> C:
10. Once in the "C:\Fastboot" folder, you will need to issue a chain of commands to flash critical images, so type:
C:\Fastboot>fastboot devices
C:\Fastboot>fastboot flash tz tz.mbn
C:\Fastboot>fastboot flash dbi sdi.mbn
C:\Fastboot>fastboot flash sbl1 sbl1.mbn
C:\Fastboot>fastboot flash rpm rpm.mbn
C:\Fastboot>fastboot flash aboot emmc_appsboot.mbn
C:\Fastboot>fastboot erase boot
C:\Fastboot>fastboot flash misc misc.img
C:\Fastboot>fastboot flash modem NON-HLOS.bin
C:\Fastboot>fastboot flash system system.img
C:\Fastboot>fastboot flash cache cache.img
C:\Fastboot>fastboot flash userdata userdata.img
C:\Fastboot>fastboot flash recovery recovery.img
C:\Fastboot>fastboot flash boot boot.img
C:\Fastboot>fastboot reboot
Now you're all set and should be able to boot normally.
after you can install recovery
to install recoverytwrp https://www.dropbox.com/s/hkuwc6d881im2hy/TWRP_leo.zip?dl=0
Extract it to the same directory you extracted ADB/Fastboot
Press "Windows key + X" -> "Command Prompt (administrator)
In command prompt, go to your folder where your ADB/Fastboot are, assuming they are in C:\Fastboot, you type
> cd C:\Fastboot
> C:
Once in the "C:\Fastboot" folder, you will need to issue a chain of commands to flash critical images, so type:
C:\Fastboot>fastboot devices
C:\Fastboot>fastboot flash recovery TWRP.img
C:\Fastboot>fastboot reboot
done now you can install latest rom from xiaomi.eu Does not locked bootloader

helderfp said:
you wiped internal sd so you have nothing the only way to solve is
Download the fastboot ROM https://www.dropbox.com/s/dg198q49dctzfgr/leo_images_5.11.26_20151104.0000.4_5.1_cn.tar.gz?dl=0 (recomend this others from this year locked bootloader)
Extract it to the same directory you extracted ADB/Fastboot
Press "Windows key + X" -> "Command Prompt (administrator)
In command prompt, go to your folder where your ADB/Fastboot are, assuming they are in C:\Fastboot, you type
> cd C:\Fastboot
> C:
10. Once in the "C:\Fastboot" folder, you will need to issue a chain of commands to flash critical images, so type:
C:\Fastboot>fastboot devices
C:\Fastboot>fastboot flash tz tz.mbn
C:\Fastboot>fastboot flash dbi sdi.mbn
C:\Fastboot>fastboot flash sbl1 sbl1.mbn
C:\Fastboot>fastboot flash rpm rpm.mbn
C:\Fastboot>fastboot flash aboot emmc_appsboot.mbn
C:\Fastboot>fastboot erase boot
C:\Fastboot>fastboot flash misc misc.img
C:\Fastboot>fastboot flash modem NON-HLOS.bin
C:\Fastboot>fastboot flash system system.img
C:\Fastboot>fastboot flash cache cache.img
C:\Fastboot>fastboot flash userdata userdata.img
C:\Fastboot>fastboot flash recovery recovery.img
C:\Fastboot>fastboot flash boot boot.img
C:\Fastboot>fastboot reboot
Now you're all set and should be able to boot normally.
after you can install recovery
to install recoverytwrp https://www.dropbox.com/s/hkuwc6d881im2hy/TWRP_leo.zip?dl=0
Extract it to the same directory you extracted ADB/Fastboot
Press "Windows key + X" -> "Command Prompt (administrator)
In command prompt, go to your folder where your ADB/Fastboot are, assuming they are in C:\Fastboot, you type
> cd C:\Fastboot
> C:
Once in the "C:\Fastboot" folder, you will need to issue a chain of commands to flash critical images, so type:
C:\Fastboot>fastboot devices
C:\Fastboot>fastboot flash recovery TWRP.img
C:\Fastboot>fastboot reboot
done now you can install latest rom from xiaomi.eu Does not locked bootloader
Click to expand...
Click to collapse
OK thanks a lot. :good:
I will try that tonight or tomorrow (already downloading from your dropbox, thanks again).
I'll let you know.

Only i dont understand: (recomend this others from this year locked boot loader) ?

EMJI79 said:
Only i dont understand: (recomend this others from this year locked boot loader) ?
Click to expand...
Click to collapse
It broke halfway, so I am trying again. Thank you for your patience.

Well, I downloaded it entirely and tried "fastboot the tz", then I get -> "device is locked. Cannot flash images"...
So I guess I locked my bootloader already, somehow... :crying:

EMJI79 said:
Well, I downloaded it entirely and tried "fastboot the tz", then I get -> "device is locked. Cannot flash images"...
So I guess I locked my bootloader already, somehow... :crying:
Click to expand...
Click to collapse
ok
so you have to do this
Download Xiaomi MiFlash Tool and install it to your PC https://www.dropbox.com/s/1qntzckybxg3rr4/MiSetup3.2.1.3111_2717.zip?dl=0
Download Qualcomm Driver 32-bit https://www.dropbox.com/s/klnn6h9z7038u80/QDLoader HS-USB Driver_32bit_Setup.zip?dl=0 OR Qualcomm Driver 64-bit https://www.dropbox.com/s/gvizx1ja1vmihox/QDLoader HS-USB Driver_64bit_Setup.zip?dl=0 install it to your PC
Enter your phone in fastboot mode
in command promt wrtite:
cmd
cd C:\fastboot
fastboot devices
fastboot oem edl
After the last command Your Note pro detected as a new device
Launch MiFlash and flash Note pro not locked ROM if you get one error at the midle (not at the beginnig) of flashing dont worry, you have unlocked bootloader, and you can folow the previous steps you already tried
The latest roms from xiaomi (since January 2016) lockes bootloader that is why i recomend that on the link.

Thanks
But I am on Mac, no MiFlash, only ADB, fastboot...

EMJI79 said:
Thanks
But I am on Mac, no MiFlash, only ADB, fastboot...
Click to expand...
Click to collapse
to work on mac
Download the fastboot ROM for your Mi phone and place it on your desktop. Double-click on it and Archive Utility will extract the file on the desktop, so you'll get a folder,
now go to terminal an type
cd C:\fastboot
fastboot devices
fastboot oem edl
In order to use the fastboot scripts, you should go to the folder. For that purpose, execute the following command (the folder name may be different in your case, the example below is for cancro):
cd ~/Desktop/cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global
Copy the Code
Quick tip: you don't need to write the whole folder name, just type cd ~/Desktop/cancro, then press the Tab key and Terminal will append the folder name automatically.
Once inside, you need to make the scripts (all the files with .sh extension) executable. Execute the following command:
chmod +x ./*.sh
Now, the scripts are ready to use. In order to start the process, issue one of the following commands:
./flash_all.sh
or
./flash_all_except_storage.sh
or
./flash_all_except_data_storage.sh
When you start any of the scripts, you'll see the fastboot messages, flowing through the Terminal window. Once the script has done its work, the phone will restart itself automatically.

When I change directory for the fastboot ROM directory, the fastboot screen on my phone disappears. I have done the steps after that but i see no message on the terminal or the phone screen. My phone screen is black.
Edit: In fact the fastboot screen on my phone disappears when I type fastboot oem edl in my terminal although i get the message OKAY in my terminal.

EMJI79 said:
When I change directory for the fastboot ROM directory, the fastboot screen on my phone disappears. I have done the steps after that but i see no message on the terminal or the phone screen. My phone screen is black.
Edit: In fact the fastboot screen on my phone disappears when I type fastboot oem edl in my terminal although i get the message OKAY in my terminal.
Click to expand...
Click to collapse
so don't change the directory put the rom in the fastboot folder and do the next step
if you are not able to flash in your mac try in another pc (windows)

Don't you think I just locked my bootloader and I need to do the apply stuff for getting my phone unlocked?

EMJI79 said:
Don't you think I just locked my bootloader and I need to do the apply stuff for getting my phone unlocked?
Click to expand...
Click to collapse
you dont need
just try
put rom in fastboot folder and
cd C:\fastboot
fastboot devices
fastboot oem edl
chmod +x ./*.sh
./flash_all.sh
to unlock bootloader the previous steps (not this) work fine on windows
http://en.miui.com/thread-237832-1-1.html
https://xiaomi.eu/community/threads/mi-note-pro-complete-beginners-guide.30817/

every time I type:
fastboot oem edl
the screen of the smartphone goes off

Maybe I will buy Windows to make it work in VM...
Only can you interpretate why fastboot oem edl makes the screen go off?

EMJI79 said:
Maybe I will buy Windows to make it work in VM...
Only can you interpretate why fastboot oem edl makes the screen go off?
Click to expand...
Click to collapse
do you have qualcom drivers instaled?

No
Will try tomorrow.
Thanks again.
The link to your dropbox for Qualcomm drivers is for Windows, i found that:https://developer.qualcomm.com/download/software
and Snapdragon SDK but I have to register.

Is Snapdragon SDK actually Qualcomm drivers?

helderfp said:
do you have qualcom drivers instaled?
Click to expand...
Click to collapse
Hello,
OK, no Qualcomm drivers for Mac it seems... I have searched thoroughly and haven't found. I have asked a en.miui dev and waiting for the response.. Don't have them?

Could someone tell me a blankflash file compatible with the Moto g5s plus?

My Moto g5s plus bricked out of nowhere, only the led keeps blinking, how can I fix this? I know there is no blankflash for this template, but is there a way to solve it?

Felipe9229 said:
My Moto g5s plus bricked out of nowhere, only the led keeps blinking, how can I fix this? I know there is no blankflash for this template, but is there a way to solve it?
Click to expand...
Click to collapse
To unbrick your device you need to have mmcblk0 file.
Here is the procedure for extracting mmcblk0.
https://forum.xda-developers.com/mo...eate-mmcblk0-img-device-t3803176/post76795590
Here is the procedure for unbrick the hard bricked device.
Requirements
Freshly formatted microSD card of at least 32gb (It needs to have at least 31.3gb free after formatting - if it displays as less you will need to buy a 64gb microSD card)
7zip
Linux mint live usb/dvd
USB card reader
Method
The BEST method to flash the sdcard with mmcbk0.img file is to use LINUX!
Windows user have no need to install Linux in pc, you can run Linux from a bootable usb-stick that is at least 8gb or a dvd
Do not run Linux as a virtual machine on Windows! Use the live USB/DVD
0) Put the Moto g5s plus on mains charge until you have finished flashing the sdcard so it's fully charged ready for the boot test!
1) Run Linux, preferably cinnamon or mate versions of Linux Mint
2) Insert the sdcard in pc or card reader and open "Disks" app
3) In "Disks" app select sdcard and you will see the sdcard partitions
4) Press "-" to delete the partition (delete all partitions if there is more than one)
5) Press "+" to create a new one and name it mmcblk0, set FAT(FAT32) file format and press "CREATE"
6) Press "Play" button to mount the sdcard, look to see what path the sdcard has (/dev/sd??) and then close the "Disks" app
7) Go to Desktop, open "Computer" and navigate to the location where the img file is extracted (mmcblk0.img)
8) Open the window where img file is with root (right click on window and select "open as root")
9) In root window open the Terminal (right click on window and select "open terminal")
no need to type "su" in terminal, it has root already (see notes if using Linux live usb/dvd)
10) Type in terminal the command written below and don't forget to eliminate that "1" from the sdcard path,
that "1" can make the difference between the phone booting or not!!!!!
Things to note
Linux Live dvd doesn't have open as root so just open in terminal and add sudo to the start of the commands
I've included this in the commands below
If you get a status error just remove status=progress from the terminal command below
Terminal comands
- if your sdcard is seen like " /dev/sdb1"
in terminal apply this command:
Code:
sudo dd bs=4M if=mmcblk0.img of=/dev/sdb status=progress oflag=sync
-if your sdcard is seen like " /dev/mmcblk0p1"
in terminal apply this command:
Code:
sudo dd bs=4M if=mmcblk0.img of=/dev/mmcblk0 status=progress oflag=sync
and the flashing process should start
When it finishes, test the sdcard in the phone and it should boot!
If you get a size error of the sdcard in terminal you have to change the sdcard and try again!
Thanks to @vaserbanix for the original version of this guide
Re-flash Stock Firmware
Once the phone is in bootloader mode you can flash stock firmware via fastboot
Note that in order to flash gpt the firmware MUST be the same or newer than the version currently on your phone
Once you have firmware that is the same or newer than your current version you can remove the sd card and run these commands (assuming you have fastboot all setup on your pc)
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5 (only oreo firmware)
fastboot flash system system.img_sparsechunk.6 (only oreo firmware)
fastboot flash system system.img_sparsechunk.7 (only oreo firmware)
fastboot flash system system.img_sparsechunk.8 (only oreo firmware)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (ignore any error)
fastboot erase clogo (ignore any error)
fastboot oem fb_mode_clear
fastboot reboot

riyan65 said:
To unbrick your device you need to have mmcblk0 file.
Here is the procedure for extracting mmcblk0.
https://forum.xda-developers.com/mo...eate-mmcblk0-img-device-t3803176/post76795590
Here is the procedure for unbrick the hard bricked device.
Requirements
Freshly formatted microSD card of at least 32gb (It needs to have at least 31.3gb free after formatting - if it displays as less you will need to buy a 64gb microSD card)
7zip
Linux mint live usb/dvd
USB card reader
Method
The BEST method to flash the sdcard with mmcbk0.img file is to use LINUX!
Windows user have no need to install Linux in pc, you can run Linux from a bootable usb-stick that is at least 8gb or a dvd
Do not run Linux as a virtual machine on Windows! Use the live USB/DVD
0) Put the Moto g5s plus on mains charge until you have finished flashing the sdcard so it's fully charged ready for the boot test!
1) Run Linux, preferably cinnamon or mate versions of Linux Mint
2) Insert the sdcard in pc or card reader and open "Disks" app
3) In "Disks" app select sdcard and you will see the sdcard partitions
4) Press "-" to delete the partition (delete all partitions if there is more than one)
5) Press "+" to create a new one and name it mmcblk0, set FAT(FAT32) file format and press "CREATE"
6) Press "Play" button to mount the sdcard, look to see what path the sdcard has (/dev/sd??) and then close the "Disks" app
7) Go to Desktop, open "Computer" and navigate to the location where the img file is extracted (mmcblk0.img)
8) Open the window where img file is with root (right click on window and select "open as root")
9) In root window open the Terminal (right click on window and select "open terminal")
no need to type "su" in terminal, it has root already (see notes if using Linux live usb/dvd)
10) Type in terminal the command written below and don't forget to eliminate that "1" from the sdcard path,
that "1" can make the difference between the phone booting or not!!!!!
Things to note
Linux Live dvd doesn't have open as root so just open in terminal and add sudo to the start of the commands
I've included this in the commands below
If you get a status error just remove status=progress from the terminal command below
Terminal comands
- if your sdcard is seen like " /dev/sdb1"
in terminal apply this command:
Code:
sudo dd bs=4M if=mmcblk0.img of=/dev/sdb status=progress oflag=sync
-if your sdcard is seen like " /dev/mmcblk0p1"
in terminal apply this command:
Code:
sudo dd bs=4M if=mmcblk0.img of=/dev/mmcblk0 status=progress oflag=sync
and the flashing process should start
When it finishes, test the sdcard in the phone and it should boot!
If you get a size error of the sdcard in terminal you have to change the sdcard and try again!
Thanks to @vaserbanix for the original version of this guide
Re-flash Stock Firmware
Once the phone is in bootloader mode you can flash stock firmware via fastboot
Note that in order to flash gpt the firmware MUST be the same or newer than the version currently on your phone
Once you have firmware that is the same or newer than your current version you can remove the sd card and run these commands (assuming you have fastboot all setup on your pc)
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5 (only oreo firmware)
fastboot flash system system.img_sparsechunk.6 (only oreo firmware)
fastboot flash system system.img_sparsechunk.7 (only oreo firmware)
fastboot flash system system.img_sparsechunk.8 (only oreo firmware)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (ignore any error)
fastboot erase clogo (ignore any error)
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Hey Friend, I don't Have other moto G5S plus for extracting mmcblk0 file.

Felipe9229 said:
To unbrick your device you need to have mmcblk0 file.
Here is the procedure for extracting mmcblk0.
https://forum.xda-developers.com/mo...eate-mmcblk0-img-device-t3803176/post76795590
Here is the procedure for unbrick the hard bricked device.
Requirements
Freshly formatted microSD card of at least 32gb (It needs to have at least 31.3gb free after formatting - if it displays as less you will need to buy a 64gb microSD card)
7zip
Linux mint live usb/dvd
USB card reader
Method
The BEST method to flash the sdcard with mmcbk0.img file is to use LINUX!
Windows user have no need to install Linux in pc, you can run Linux from a bootable usb-stick that is at least 8gb or a dvd
Do not run Linux as a virtual machine on Windows! Use the live USB/DVD
0) Put the Moto g5s plus on mains charge until you have finished flashing the sdcard so it's fully charged ready for the boot test!
1) Run Linux, preferably cinnamon or mate versions of Linux Mint
2) Insert the sdcard in pc or card reader and open "Disks" app
3) In "Disks" app select sdcard and you will see the sdcard partitions
4) Press "-" to delete the partition (delete all partitions if there is more than one)
5) Press "+" to create a new one and name it mmcblk0, set FAT(FAT32) file format and press "CREATE"
6) Press "Play" button to mount the sdcard, look to see what path the sdcard has (/dev/sd??) and then close the "Disks" app
7) Go to Desktop, open "Computer" and navigate to the location where the img file is extracted (mmcblk0.img)
8) Open the window where img file is with root (right click on window and select "open as root")
9) In root window open the Terminal (right click on window and select "open terminal")
no need to type "su" in terminal, it has root already (see notes if using Linux live usb/dvd)
10) Type in terminal the command written below and don't forget to eliminate that "1" from the sdcard path,
that "1" can make the difference between the phone booting or not!!!!!
Things to note
Linux Live dvd doesn't have open as root so just open in terminal and add sudo to the start of the commands
I've included this in the commands below
If you get a status error just remove status=progress from the terminal command below
Terminal comands
- if your sdcard is seen like " /dev/sdb1"
in terminal apply this command:
-if your sdcard is seen like " /dev/mmcblk0p1"
in terminal apply this command:
and the flashing process should start
When it finishes, test the sdcard in the phone and it should boot!
If you get a size error of the sdcard in terminal you have to change the sdcard and try again!
Thanks to @vaserbanix for the original version of this guide
Re-flash Stock Firmware
Once the phone is in bootloader mode you can flash stock firmware via fastboot
Note that in order to flash gpt the firmware MUST be the same or newer than the version currently on your phone
Once you have firmware that is the same or newer than your current version you can remove the sd card and run these commands (assuming you have fastboot all setup on your pc)
Hey Friend, I don't Have other moto G5S plus for extracting mmcblk0 file.
Click to expand...
Click to collapse
You can try asking your xda friends, to extract the mmcblk0 file. Or someone with this device you know who can help.

Felipe9229 said:
My Moto g5s plus bricked out of nowhere, only the led keeps blinking, how can I fix this? I know there is no blankflash for this template, but is there a way to solve it?
Click to expand...
Click to collapse
i am succesfully extracted mmcblk0.img from my working moto g5s plus today. But the size is about 62.5 GB (without zipping), Unable to upload - my daily data limit is only 2gb, Were is your location?

pradeeppk said:
i am succesfully extracted mmcblk0.img from my working moto g5s plus today. But the size is about 62.5 GB (without zipping), Unable to upload - my daily data limit is only 2gb, Were is your location?
Click to expand...
Click to collapse
:crying::crying::crying:

[Guide] [6.0] How to restore stock ROM XT1097 step by step

Hi guys, I'm doing this tutorial because I didn't find a complete tutorial on how to restore our Moto X 2014 to stock 6.0 marshmallow.
As I asked here for help, I tried encrypting the phone when using LineageOS but it failed and then bootlooped, so I needed to reflash the stock ROM because the formating though TWRP failed too.
I used a Linux distro to do the job. For windows I think there are scripts out there which do the job, and of course you can adapt the commands given here to work with Windows (i.e. changing "sudo fastboot" to "fastboot.exe").
Note: My device is a XT1097 variant and the boot loader was already unlocked. There's also a Zip file for those who have a working TWRP recovery already.
Download the ROM files here: EU variant // RET LA + NIIMX variants
The file I used for this tutorial was: Motorola_Moto_X_XT1097_VICTARA_RETLA_6.0_MPES24.49-18-3_cid12_6.0.zip
Setup of the computer:
1- Install androidtools-fastboot & androidtools-adb
[Optional] 2- Install libmtp package too
Setup of the phone:
1- Reboot your phone into fastboot mode (press power and vol down toghether)
2- Connect the phone to PC
3- Extract the content of the Zip file & enter the folder
4- Open a new terminal inside the folder called "Firmware"
5- Execute these commands below (one command per line)
Bash:
sudo fastboot flash partition gpt.bin
sudo fastboot flash motoboot motoboot.img
sudo fastboot flash boot boot.img
sudo fastboot flash recovery recovery.img
sudo fastboot flash system system.img_sparsechunk.0
sudo fastboot flash system system.img_sparsechunk.1
sudo fastboot flash system system.img_sparsechunk.2
sudo fastboot flash system system.img_sparsechunk.3
sudo fastboot flash system system.img_sparsechunk.4
sudo fastboot flash system system.img_sparsechunk.5
sudo fastboot flash system system.img_sparsechunk.6
sudo fastboot flash system system.img_sparsechunk.7
sudo fastboot flash system system.img_sparsechunk.8
sudo fastboot flash system system.img_sparsechunk.9
sudo fastboot flash modem NON-HLOS.bin
sudo fastboot erase modemst1
sudo fastboot erase modemst2
sudo fastboot flash fsg fsg.mbn
sudo fastboot erase cache
sudo fastboot erase userdata
sudo fastboot erase customize
sudo fastboot erase clogo
[Optional] Tip: If you want to reset the Motorola logo too (it will display again the warning regarding the bootloader unlock, this is why I skipped it), execute the command below just before entering boot.img command
Bash:
sudo fastboot flash logo logo.bin
6- Reboot the phone just in case
Bash:
sudo fastboot reboot-bootloader
7- Reboot the phone into the system
Bash:
sudo fastboot reboot
8- Wait several minutes on the animation booting screen
9- Done, the phone should now show the "Welcome" greenish screen
10- After the initial setup, go to the PlayStore and update your Google Play Services app before updating/installing other apps
I based my tutorial on this post here by @seco2004 and in this post forum here by Junior Gomes. Thanks for all the devs for the hard work with this amazing (besides the battery duration) phone and for that website for hosting all Motorola's stock ROMs at GDrive.