Database Develop

Flashable Moto X Radio

I converted my AT&T Moto X (XT1058) to the developer edition (XT1053) and I would like to make sure I can get the radios for the AT&T Model to put back on the device. The XT1053 and XT1058 but the AT&T model has a few different frequencies available to take full advantage of the AT&T Network.
I could wait til I get open and download the file and manually flash the radio but was hoping someone has or is able to make flashable zip files that will flash the radio and wipe the radio cache as per the XML mfastboot batch file.
Currently running 4.4.3 (Stock)
and my baseband version is MSM8960PRO_BP_2323.038.123.00R

BrokenWall said:
I converted my AT&T Moto X (XT1058) to the developer edition (XT1053) and I would like to make sure I can get the radios for the AT&T Model to put back on the device. The XT1053 and XT1058 but the AT&T model has a few different frequencies available to take full advantage of the AT&T Network.
I could wait til I get open and download the file and manually flash the radio but was hoping someone has or is able to make flashable zip files that will flash the radio and wipe the radio cache as per the XML mfastboot batch file.
Currently running 4.4.3 (Stock)
and my baseband version is MSM8960PRO_BP_2323.038.123.00R
Click to expand...
Click to collapse
WARNING: Be very careful. Since you have flashed the XT1053 ROM (which is on 4.4.3), you can NEVER go back to the AT&T ROM until it is updated to 4.4.3 as well. If you do you would (in essence) be DOWNGRADING. This can result in a brick OR having mismatched gpt.bin and/or bootloader.
Here is what you should do: Download the entire 4.4.2 AT&T SBF file from here: http://sbf.droid-developers.org/phone.php?device=0
Extract the file, and find JUST the following files: fsg.mbn & NON-HLOS.bin
use fastboot to flash these files:
fastboot flash fsg fsg.mbn
fastboot flash modem NON-HLOS.bin
then erase your modemst partitions:
fastboot erase modemst1
fastboot erase modemst2
REBOOT!
Now you should have the XT1053 rom, with the AT&T radio.
Good Luck!
BE CAREFUL - you will probably not be able to accept OTAs because you will have mismatched files which probably won't pass the verification. This may not be accurate (you might be able to accept future OTAs anyways, but use caution, nonetheless).

samwathegreat said:
WARNING: Be very careful. Since you have flashed the XT1053 ROM (which is on 4.4.3), you can NEVER go back to the AT&T ROM until it is updated to 4.4.3 as well. If you do you would (in essence) be DOWNGRADING. This can result in a brick OR having mismatched gpt.bin and/or bootloader.
Here is what you should do: Download the entire 4.4.2 AT&T SBF file from here: http://sbf.droid-developers.org/phone.php?device=0
Extract the file, and find JUST the following files: fsg.mbn & NON-HLOS.bin
use fastboot to flash these files:
fastboot flash fsg fsg.mbn
fastboot flash modem NON-HLOS.bin
then erase your modemst partitions:
fastboot erase modemst1
fastboot erase modemst2
REBOOT!
Now you should have the XT1053 rom, with the AT&T radio.
Good Luck!
BE CAREFUL - you will probably not be able to accept OTAs because you will have mismatched files which probably won't pass the verification. This may not be accurate (you might be able to accept future OTAs anyways, but use caution, nonetheless).
Click to expand...
Click to collapse
Oh yeah I am not worried about the swap. I was going to apply my updates manually, I couldn't remember if I was running the XT1053 or XT1058 radios so I wanted to get both so I can swap them out. I was going to do the same process you stated when I got home, I was just asking to see if someone could make flashable zips so I can put them on my phone for testing. It would also allow me to flash the stock radio before taking an OTA and then flash back to the AT&T radio afterwards.

How do I flash an XT1068 as an XT1064?

Simple question:
I have a UK **DUAL* SIM Moto G 2nd gen, XT1068, and I wish to flash it to an XT1064, US *SINGLE* SIM Moto G. How do I do this? Do I merely flash the US retail 4.4.4 onto it? I know this process could be carried out on the older 1st gen, to convert an XT1033 to an XT1032 (single SIM) - maybe I am impatient, but I want to try...
If you could advise me how to do this, please do let me know. What I am NOT after, is people asking me "why do you want to do this?" or telling me "Do you know the risks of X, Y or Z?" - I am an experienced engineer who's been using many platforms since the 1980s, I use Linux daily since 2003, and I know what I am doing - I know there are risks (with everything in tech, basically) and dissuasion is not needed, thanks folks

I also wanted to know how to do it :/

Flash kitkat image of us version then update to lollipop see it works but before take a backup of ur system and modem

abhi0502 said:
Flash kitkat image of us version then update to lollipop see it works but before take a backup of ur system and modem
Click to expand...
Click to collapse
Thank you. Okay, so would you mind continuing to explain why I'm backing up system and modem, what i do with them once backed up.... etc? You've given me only minimal information, and I'm not told why I'm doing this or what i do with them once backed up...
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.

glossywhite said:
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Click to expand...
Click to collapse
So, wait for the official release

glossywhite said:
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
Click to expand...
Click to collapse
I guess you'd have to keep these backup on your PC, just in case, then you would follow the steps to go stock but with xt1064 files, once you flash it all, you'd start the system and check for update, if there is none, you'd download the zip and flash it by adb sideload. The backup is just for safety. My guess, and some kind obvious, is that your Sim won't work, then you'd have to flash the modem in order to see if at least sim 1 works.
Sent from my XT1068 using XDA Free mobile app
Edit: Yesterday I flashed xt1063 zip but I wasn't getting any update but it did worked. My guess is xt1064 might work

glossywhite said:
Thank you. Okay, so would you mind continuing to explain why I'm backing up system and modem, what i do with them once backed up.... etc? You've given me only minimal information, and I'm not told why I'm doing this or what i do with them once backed up...
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
Click to expand...
Click to collapse
Firstly flash stock firmware images of us which is already present in development thread
Then update to lollipop manually using stock recovery which zip file already present here
If your phone boots then its ok contact me if you have any problems
If u want to go back to kitkat dual sim refere here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
There no need to backup as stock firmware with fastboot already present but do backup your data

rodrigo07 said:
So, wait for the official release
Click to expand...
Click to collapse
Of?
Ah, you presume I am looking to install lollipop? I am looking to convert an XT1068 to an XT1064, I never mentioned lollipop.

abhi0502 said:
Firstly flash stock firmware images of us which is already present in development thread
Then update to lollipop manually using stock recovery which zip file already present here
If your phone boots then its ok contact me if you have any problems
If u want to go back to kitkat dual sim refere here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
There no need to backup as stock firmware with fastboot already present but do backup your data
Click to expand...
Click to collapse
Thank you for your help. I really value it, God bless you

But...if you flash 4.4.4 on a dual sim anda that stuff and you convert it into a XT1064, will the Lollipop ota arrive?

laureano97 said:
But...if you flash 4.4.4 on a dual sim anda that stuff and you convert it into a XT1064, will the Lollipop ota arrive?
Click to expand...
Click to collapse
It doesn't matter - I've tried this twice tonight with fastboot errors, so I decided to err on the side of caution and restore stock UK XT1068 firmware, and wait... hehe

I could successfully convert XT1068 to XT1064 and installed Android Lollipop
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb AND "WORKS LIKE A CHARM"...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??

Chetsan Manjunath said:
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Click to expand...
Click to collapse
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc

No luck
rodrigo07 said:
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
Click to expand...
Click to collapse
Thank you for your reply....Tried just now still no signal...any other way?? i guess i need the kernel image to be flashed where can i get that..??

rodrigo07 said:
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
Click to expand...
Click to collapse
hello rodrigo07 i got the same error and tried the same procedure you passed reinstalled the modem from my original rom not got more success trying to work it more I think it will be better to wait original lollipop should not take out sorry for my bad english

Chetsan Manjunath said:
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb AND "WORKS LIKE A CHARM"...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Click to expand...
Click to collapse
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata

abhi0502 said:
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin mfastboot.exe erase modemst1 mfastboot.exe erase modemst2 mfastboot.exe flash fsg fsg.mbn mfastboot.exe erase cache
mfastboot.exe erase userdata
Click to expand...
Click to collapse
Ok...Thank you...please be online i am gonna test it immediately and post the feedback...

humm so there is people here who has converted to US single sim and they are enjoying it right? without network problems, for example, in Europe?

abhi0502 said:
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
Click to expand...
Click to collapse
I am downloading CA firmware now RETCA_XT1064_4.4.4_KXB21.85-16_cid14_CFC.xml.zip...Can i flash NON-HLOS.bin and fsg.mbn of CA for it to work now??

Chetsan Manjunath said:
I am downloading CA firmware now RETCA_XT1064_4.4.4_KXB21.85-16_cid14_CFC.xml.zip...Can i flash NON-HLOS.bin and fsg.mbn of CA for it to work now??
Click to expand...
Click to collapse
Flash all command i have given
U need to check which firmware has single sim then try

[Q] When is Lollipop going to be pushed?

So I just bought my Moto G 2014 (unlocked) and I have it all activated and set up. I was wondering though when Lollipop will be pushed so I can update to it? All I see articles are saying "It will get it" and "you should be able to update to it now" but I can't and I really don't want to void my warranty a day after I bought the phone. I want to try vanilla* Lollipop. Does anybody know when exactly?
( * = without having to manually install it via unlocking bootloader and using fastboot)

Motorola knows.

If it is the XT1063/4 ones, you can already install it via OTA.
Sent from my XT1064 using XDA Free mobile app

I have an Xt1064 and I still havent received the update. Is the update available here the same as the OTA? Im tempted to just install that one.
PerrottiX said:
If it is the XT1063/4 ones, you can already install it via OTA.
Sent from my XT1064 using XDA Free mobile app
Click to expand...
Click to collapse

I have XT1063 and I still didn't get the update through OTA as well. Is this normal?

i was trying
Hello, im from Perú. I got an XT1063 so when i am flashing i got two problems
1. hab check failed for boot
2. hab check failed for recovery
so anyone can help me?
I tried with Fastboot and with mfastboot, but same result.
I found this updates in other web which you can update to lollipop. Can anybody try them? I want to try but i can open the recovery...
getmovil dot com / motorola / root-moto-g-2014-android-lollipop /comment-page-1 /#comment-83348

Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.

Lokke9191 said:
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Click to expand...
Click to collapse
...from where can i download the proper ota zip????
mine is MOTO G2 (2nd GEN) XT1068 dual sim europe

You can't. Lollipop isn't released for the XT1068 yet. But be patient. I suspect it to be there in the first or the second quarter of 2015! (And with a little luck maybe even this year...).

i understood we will take directly :angel:Android 6.0 (M) Milky Bar.......:good:

htcgr said:
i understood we will take directly :angel:Android 6.0 (M) Milky Bar.......:good:
Click to expand...
Click to collapse
Honestly, it should be there anytime now. But people keep asking the question over and over again: when is it coming? This is annoying, because no one really knows!

Lokke9191 said:
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Click to expand...
Click to collapse
any idea how to re-lock the bootloader? :good:

kevin_arthur said:
any idea how to re-lock the bootloader? :good:
Click to expand...
Click to collapse
Follow the guide at ( http://www.droidviews.com/restore-moto-g-2014-to-stock-and-lock-the-bootloader/ ). However there's a couple of things you have to do differently.
Your first command after you enter fastboot mode is gonna have to be "mfastboot.exe oem lock begin".
Theres also gonna be four system.img that you have to flash so after the command "mfastboot.exe flash system system.img_sparsechunk.2" you have to enter the command "mfastboot.exe flash system system.img_sparsechunk.3". Follow the rest of the guide, including the "mfastboot.exe oem lock" command at the end.
So basically the commands would be...
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
My phone automatically rebooted after that last command and my boot loader was locked even though it still displays the "Bootloader Unlocked" screen, I was able to flash the zip in the OP through the stock recovery after that.
COPIED AND PASTED FROM ANOTHER THREAD.
Courtesy of captivatingtab
---------- Post added at 11:29 AM ---------- Previous post was at 11:13 AM ----------
htcgr said:
...from where can i download the proper ota zip????
mine is MOTO G2 (2nd GEN) XT1068 dual sim europe
Click to expand...
Click to collapse
The xt1068 ota isnt available yet. There is a process to install another versions firmware on the xt1068 then upgrade to lollipop. But it looks buggy and super risky. I wouldn't recommend trying it. Id wait a little for the 1068 ota to be released. I know the other poster said it wont be available until 2015. But nobody knows for sure when itll be out. If i where to guess, id say itll be out fairly soon, sometime in the next 30 days. If I where you Id play it safe and wait it out.
---------- Post added at 11:32 AM ---------- Previous post was at 11:29 AM ----------
The only otas out so far are for the 1064 & 1063.

wish me luck!
Lokke9191 said:
Follow the guide at ( ). However there's a couple of things you have to do differently.
Your first command after you enter fastboot mode is gonna have to be "mfastboot.exe oem lock begin".
Theres also gonna be four system.img that you have to flash so after the command "mfastboot.exe flash system system.img_sparsechunk.2" you have to enter the command "mfastboot.exe flash system system.img_sparsechunk.3". Follow the rest of the guide, including the "mfastboot.exe oem lock" command at the end.
So basically the commands would be...
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
My phone automatically rebooted after that last command and my boot loader was locked even though it still displays the "Bootloader Unlocked" screen, I was able to flash the zip in the OP through the stock recovery after that.
COPIED AND PASTED FROM ANOTHER THREAD.
Courtesy of captivatingtab
Click to expand...
Click to collapse
okey, i will try.
thank you my friend!

smitharro said:
You can't. Lollipop isn't released for the XT1068 yet. But be patient. I suspect it to be there in the first or the second quarter of 2015! (And with a little luck maybe even this year...).
Click to expand...
Click to collapse
It'll be sooner than that. Within the next 6 weeks.
Sent from my XT1068 using XDA Free mobile app

Lokke9191 said:
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Click to expand...
Click to collapse
i have the international unlocked xt1063. where can i get the zip?

Is there any official source on the release date?

Kobro said:
i have the international unlocked xt1063. where can i get the zip?
Click to expand...
Click to collapse
Its in the general section under a thread titled ota-index 1063-1064 update to lollipop.

I have a complete stock, nothing flashed or rooted or anything xt1064 and it says the zip needs a fingerprint when I try to install it from this thread...
http://forum.xda-developers.com/moto-g-2014/development/lollipop-moto-g-2014-xt1064-t2937361/page11

htcgr said:
i understood we will take directly :angel:Android 6.0 (M) Milky Bar.......:good:
Click to expand...
Click to collapse
its a Marshmallow 6.0

Flashed Stock MM, now can't complete setup wizard

I was on 5.1, bootloader unlocked by sunshine. I rooted to enable tethering, and after did a full unroot. Once the OTA MM update came it couldn't install. Android on back and then rebooted. Instead of trying to fix the software, I decided to get MM from XDA. I flashed TWRP, updated bootloader from computerfreek's thread and flashed his rom for non-verizon.
Now once it turns on I can choose language. At the next page it says select wi-fi netowork, but no wifi networks show up and the Skip button is grayed out.
I followed the directions again and reflashed a few times, but the same result.
I then tried the Brazilian MM from iiwoodstock but with the same result. I flashed his with and without the linked kernal, but again, with the same results.
Any ideas? I was hoping to avoid flashing the stock images, but if that's my only option....

Well I got irritated enough and flashed stock. All is working now.
It was a pain because I only have Windows 10, so RSDLite was being irritating.
Here are the steps I wish someone had put together for me.
This is for flashing this version (and only this version) of stock by using fastboot:
https://forum.xda-developers.com/dr...-official-stock-firmware-6-0-1-mcg24-t3531571
Having ADB Everywhere helps. Just install this:
https://www.xda-developers.com/15-s...ng-fast-adb-fastboot-and-driver-installation/
Make sure your drivers are installed. I needed to go to motorola to download their software to get fastboot drivers to work:
https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/103535/p/30,6720,9277
Have a copy of fastboot.exe
(Google it or just do a search on your computer. You probably have a copy of it somewhere if you've ever done anything to a phone)
Here is a link to the .bat file I made that will flash it without needing RSD.
https://nofile.io/f/sh00er98rzM/servicefile.bat
In case someone finds this thread and the file is no longer hosted, here it the text of the .bat file (use Notepad++ or something):
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot erase clogo
fastboot oem fb_mode_clear
pause
fastboot reboot
exit
(Have phone connected in fastboot mode - power plus volume down)
1. Extract the stock image into a folder
2. Put the .bat file in that folder
3. Put a copy of fastboot.exe into the folder as well
4. double click the .bat file
(wait for it to finish. If there's errors, don't worry, it should be fine. Worry when it's worth it. This is not a big deal)
done
I figured this out primarily because of RootJunky.com's youtube video.
https://www.youtube.com/watch?v=njXQYn53SPc

gr8hairy1 said:
This is for flashing this version (and only this version) of stock by using fastboot:
https://forum.xda-developers.com/dr...-official-stock-firmware-6-0-1-mcg24-t3531571
Click to expand...
Click to collapse
any reason you wanted to flash an older version and the newest?
You flashed this:
[FXZ] Official Stock Firmware 6.0.1 MCG24.251-5 (January 2017)
But this is much newer (March 2017):
[FXZ] Official Stock Firmware 6.0.1 MCG24.251-5-5
https://forum.xda-developers.com/dr...-official-stock-firmware-6-0-1-mcg24-t3569334

ChazzMatt said:
any reason you wanted to flash an older version and the newest?
You flashed this:
[FXZ] Official Stock Firmware 6.0.1 MCG24.251-5 (January 2017)
But this is much newer (March 2017):
[FXZ] Official Stock Firmware 6.0.1 MCG24.251-5-5
https://forum.xda-developers.com/dr...-official-stock-firmware-6-0-1-mcg24-t3569334
Click to expand...
Click to collapse
No reason. That was the first one I had come across. At the time I was out of state visiting family and their internet was extremely slow.
I didn't feel like waiting another 2+ hours downloading what seemed like a minor update.
....or does it fix anything? I haven't found anything showing the reason that update was pushed

gr8hairy1 said:
No reason. That was the first one I had come across. At the time I was out of state visiting family and their internet was extremely slow.
I didn't feel like waiting another 2+ hours downloading what seemed like a minor update.
....or does it fix anything? I haven't found anything showing the reason that update was pushed
Click to expand...
Click to collapse
Release notes here:
https://www.verizonwireless.com/support/droid-turbo-update/
Sent from my carrier unlocked LG V30+ US998

'No Sim Card/No Signal' after flashing Stock ROM - (IMEI IS NOT GONE)

First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'.
Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL,
I was getting 'Call Ended' Error.
So i decided to flash ORIGINAL ROM via fastboot.
When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card.
Now i have Original ROM with 'NO SIM CARD' error.
And I tried to Search Network 'Manually' and 'Automatically', both didnt work.
What to do now?

Keyur Sureliya said:
First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'.
Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL,
I was getting 'Call Ended' Error.
So i decided to flash ORIGINAL ROM via fastboot.
When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card.
Now i have Original ROM with 'NO SIM CARD' error.
And I tried to Search Network 'Manually' and 'Automatically', both didnt work.
What to do now?
Click to expand...
Click to collapse
Is your network Volte?
Did you took backup after installing TWRP, if you have backup of efs and persist, most likely you'll get back your Volte on restoring.

I have the same issue but i find solution
Step by step:
1. Flash TWRP.
2. Flash Pixel Experience rom if we haven't flashed yet.
3. Turn on phone with flashed rom to obtain network signal
4. Here we will get the IMEI and only have 3g signal, so we need to restart the phone in bootloader mode and type in fastboot "fastboot erase modemst1" and "fastboot erase modemst2", and reboot again
5.turn off and into recovery, go to buckup and Select only EFS and save in your sd card
6.flash rom stock,and turn on your phone
7.turn off and get into recovery,restore your buckup
8.reboot
Sent from my Moto G5S Plus using XDA Labs

Keyur Sureliya said:
First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'.
Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL,
I was getting 'Call Ended' Error.
So i decided to flash ORIGINAL ROM via fastboot.
When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card.
Now i have Original ROM with 'NO SIM CARD' error.
And I tried to Search Network 'Manually' and 'Automatically', both didnt work.
What to do now?
Click to expand...
Click to collapse
As it is not potter but sanders i can't refer my posts because it is for potter.
But i can help.
Telegram me :
http://t.me/i_am_geekofia

diegomartinezlovey said:
I have the same issue but i find solution
Step by step:
1. Flash TWRP.
2. Flash Pixel Experience rom if we haven't flashed yet.
3. Turn on phone with flashed rom to obtain network signal
4. Here we will get the IMEI and only have 3g signal, so we need to restart the phone in bootloader mode and type in fastboot "fastboot erase modemst1" and "fastboot erase modemst2", and reboot again
5.turn off and into recovery, go to buckup and Select only EFS and save in your sd card
6.flash rom stock,and turn on your phone
7.turn off and get into recovery,restore your buckup
8.reboot
Click to expand...
Click to collapse
Thank you, it worked, but now i can't call or receive call, and network is reconnecting every few mins. And another new problem I'm facing is now Battery is draining too fast!

GEEKOFIA said:
As it is not potter but sanders i can't refer my posts because it is for potter.
But i can help.
Telegram me :
http://t.me/i_am_geekofia
Click to expand...
Click to collapse
"No username found." Is there any other username of yours in telegram?

Keyur Sureliya said:
"No username found." Is there any other username of yours in telegram?
Click to expand...
Click to collapse
my bad i changed it to https://t.me/Rage_Demon.
join group here https://t.me/geekofia.

Keyur Sureliya said:
First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'.
Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL,
I was getting 'Call Ended' Error.
So i decided to flash ORIGINAL ROM via fastboot.
When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card.
Now i have Original ROM with 'NO SIM CARD' error.
And I tried to Search Network 'Manually' and 'Automatically', both didnt work.
What to do now?
Click to expand...
Click to collapse
New Discoveries:
Problem of "Unable of Call OR Receive Call AND SMS" is ONLY IN JIO SIM CARD, I tried Airtel SIM and Its working fine, BUT Network is getting Disconnected frequently on its own EVERY FEW MINS.
The Problem of Not be able to CALL OR SMS is because now "Enhanced 4G LTE" option is GONE in Stock ROM.

My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom.
You need to be careful when flashing stock roms to make sure you have the right model and region.
Here's what I did, I hope it helps:
First find out the correct model, mine is XT1805 (Europe, dual sim)
Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/"
Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn"
Flash using fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again

coldhx said:
My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom.
You need to be careful when flashing stock roms to make sure you have the right model and region.
Here's what I did, I hope it helps:
First find out the correct model, mine is XT1805 (Europe, dual sim)
Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/"
Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn"
Flash using fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again
Click to expand...
Click to collapse
did you get signal now ??

Yo tuve el mismo problema y mi solicion fue instalar todas las actualizaciones de sistema, cada vez que instalo una nueva ROM tengo que instalar todas las actualizaciones de sistema para tener de nuevo conección con mi simcard

I have the same problem "no sim inserted". I don't want to install any other ROMs, just want the signal back. Please help if anyone has the fix.

Purple_Panda said:
I have the same problem "no sim inserted". I don't want to install any other ROMs, just want the signal back. Please help if anyone has the fix.
Click to expand...
Click to collapse
Hope this can help https://forum.xda-developers.com/g5-plus/how-to/fixed-flash-stock-firmware-moto-g5-plus-t3763606

This happened to me after going back to Tmo from Retus.

coldhx said:
My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom.
You need to be careful when flashing stock roms to make sure you have the right model and region.
Here's what I did, I hope it helps:
First find out the correct model, mine is XT1805 (Europe, dual sim)
Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/"
Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn"
Flash using fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again
Click to expand...
Click to collapse
Thank you. Those little adb commands worked like magic for me

coldhx said:
My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom.
You need to be careful when flashing stock roms to make sure you have the right model and region.
Here's what I did, I hope it helps:
First find out the correct model, mine is XT1805 (Europe, dual sim)
Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/"
Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn"
Flash using fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again
Click to expand...
Click to collapse
same problem here, this logo after installing the Havoc OS, someone found a solution, performed the procedures that passed but the same problem continues
---------- Post added at 04:50 PM ---------- Previous post was at 03:59 PM ----------
coldhx said:
My phone was not detecting the sim card after I flashed a bad radio (NON-HLOS.bin) from the wrong stock rom.
You need to be careful when flashing stock roms to make sure you have the right model and region.
Here's what I did, I hope it helps:
First find out the correct model, mine is XT1805 (Europe, dual sim)
Download the correct stock firmware for your region and model. I can't post links but ALL regions available in "https://mirrors.lolinet.com/firmware/moto/sanders/official/"
Once you have the correct stock rom, extract "NON-HLOS.bin" and "fsg.mbn"
Flash using fastboot:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
This got me back to the sim card being detected. I still don't have cell network on stock rom, but at least the sim is detected again
Click to expand...
Click to collapse
same problem here, this logo after installing the Havoc OS, someone found a solution, performed the procedures that passed but the same problem continues

hello please help i have a moto g5s i downgrade to 7.1.1 follow this tutorial, imei and baseband OK, but no signal, i tried with different flashes, and not work, when i return to 8.1 rom signal ok, but touchscreen dont work...

diegomartinezlovey said:
I have the same issue but i find solution
Step by step:
1. Flash TWRP.
2. Flash Pixel Experience rom if we haven't flashed yet.
3. Turn on phone with flashed rom to obtain network signal
4. Here we will get the IMEI and only have 3g signal, so we need to restart the phone in bootloader mode and type in fastboot "fastboot erase modemst1" and "fastboot erase modemst2", and reboot again
5.turn off and into recovery, go to buckup and Select only EFS and save in your sd card
6.flash rom stock,and turn on your phone
7.turn off and get into recovery,restore your buckup
8.reboot
Sent from my Moto G5S Plus using XDA Labs
Click to expand...
Click to collapse
erasing 'modemst1'...
FAILED (remote: Error: This image isn't allow download
)

Problem solved .. i flashed stock august 19 using codes
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
fastboot erase DDR
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
then after first boot again flash this coades
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
baseband and imei showing
Keyur Sureliya said:
First, I rooted my device, then i flashed 'TWRP-r20' recovery and flashed 'Lineage OS 15.1 - 20180422 - UNOFFICIAL - sanders'.
Everything was working fine except i couldn't CALL to anyone, So i flashed 'PixelExperience_sanders-8.1.0-OFFICIAL' and everything was same as "Lineage OS", NO INCOMING OR OUTGOING CALL,
I was getting 'Call Ended' Error.
So i decided to flash ORIGINAL ROM via fastboot.
When i booted up the rom there's no signal, after completing setup, i checked it wasn't detecting any Sim Card.
Now i have Original ROM with 'NO SIM CARD' error.
And I tried to Search Network 'Manually' and 'Automatically', both didnt work.
What to do now?
Click to expand...
Click to collapse

Same here :/