Database Develop

Help! Stuck at HBOOT, need ideas/help!

Hi,
I bought a faulty Nexus one from ebay, thought I can fix it, as I did buy a faulty desire from ebay and was able to fix it. This time im not so lucky I guess.
So here it is:
The phone is stuck at X when booting normally.
I can access HBoot (But not Hboot USB Plug, because USB debugging is not enabled) and Fastboot USB. I unlocked Hboot. Fastboot in PC recognizes the phone but ADB does not as usb debugging is not enabled.
The phone is not Rooted
Here are my ideas so far:
Get somehow debugging on with some commands (No luck from reshearching in google)
Reflash stock rom with PASSIMG.ZIP in sdcard, but my phone does not recognize the file from my sdcard (I'm pretty certain im doing something wrong or my idea is somehow wrong)
Flash new images through FASTBOOT, but every time Signature check fails (Shipped-roms.com).
Root with superboot, but signature check failed here too.
Flash a recovery, signature check fails.
I will reguraly update my tries
Please suggest correction to my ideas or suggest new ones!
Help will be much appreciated!
I admit it, the phone might be briked, but I want to make sure that I have tried everything before I abandon this project.
And ofcourse I have no Warranty.

What file are you using for passimg.zip? Make sure it's not a zip inside a zip.
What images are you using via the fastboot flash command?
Sent from my Nexus One

You didn't unlock the bootloader, it seems - because if you did, it wouldn't be checking signatures, and you'd be able to flash anything.

First of thanks to both of you for helping.
I'm pretty sure that i do not have zip inside zip and I downloaded them from shipped roms.com -> android -> Passion-> PASSIMG_Google .... .ZIP, (Then renamed it ofcourse) Is there a difference what version of android i use?
The issue with this is, it checks the SD CARD and does not find anything. I have seen from google that the most common issue is that it starts to check the .zip file but then aborts. Does the SDCARD have to be a goldcard (I do have a goldcard but it might be faulty, right?)
I tried fastboot flash PASSIMG_Google.... .ZIP; Fastboot Flashall ( With having boot, recovery, system in my fastboot folder)
Maybe I should try to flash everything the .zip has in it seperately because that succeded for boot, system and recovery but I was too afraid to flash every partitation (Like Radio which seems to be the scariest and the most easiest way to brick phone)
For the third answer, I have ***UNLOCKED*** in bootloader in purple and top on the screen.
Once again thanks and keep suggesting!

Unpack the ZIP and flash each image separately.
Leave the radio as is, if it's updated enough (5.08 or 5.12). In any case, fastboot won't allow you to flash bad radio - and the risk of bricking the phone using fastboot is near 0.

For passimg.zip, you need to download the FRG33 shipped ROM from shipped-roms.com then EXTRACT the zip file that is inside the zip that you downloaded. Rename that file to passimg.zip
For fastboot, flash boot and system seperately.
When you boot the device normally, do you see the lock icon below the four colored x?
Sent from my Nexus One

Okay,
Did it one by one (PASSIMG_Passion_Google_WWE_2.16.1700.1_FRG33_release_signed.zip):
Succeeded:
Boot, Recovery, System and Userdata (that was only 3Kb)
Failed with signature check (Remote:Signature check failed):
Splash1, spcustom,
Did not do:
Radio
I'm going to post more details:
When booting up, it displays the X normally with the unlocking badge on the bottom of the screen and vibrates once. Then it goes black for a second or even less, the same images comes on and then it vibrates 6-7 times.

now that you successfully flashed the stock recovery, cam you boot into it?
Sent from my Nexus One

Nope, it does that what I described on the previous post
Oh and what's more it randomly during no activity being in fastboot vibrates as well for 5 times or so. It does this rarely but it's there

http://forum.xda-developers.com/showthread.php?t=710937

Thanks, Well thats it then for now, just have to figure out what to do now

Sounds like you need to get the PASSIMG.zip method to work, or unlock and flash a new recovery like amon ra, and flash a full rom with sig checks off.

siimplangi said:
Nope, it does that what I described on the previous post
Oh and what's more it randomly during no activity being in fastboot vibrates as well for 5 times or so. It does this rarely but it's there
Click to expand...
Click to collapse
Ok, but can you boot into recovery? In other words, boot into the bootloader and select recovery.

any solution?
efrant said:
Ok, but can you boot into recovery? In other words, boot into the bootloader and select recovery.
Click to expand...
Click to collapse
hi guys.i have exactly same situation.
does anyone have a solution fir this?

kobi_eidelman said:
hi guys.i have exactly same situation.
does anyone have a solution fir this?
Click to expand...
Click to collapse
Did you try all the solutions suggested above (passimg, fastboot flash, etc)? If yes then no I don't think so.

Help! My Motorola RAZR I XT890 cannot be "unbricked" and I tried several methods...

Help! My Motorola RAZR I XT890 cannot be "unbricked" and I tried several methods...
Hello!
I unlocked the bootloader successfully, then I tried to root my phone using The Razr guy method and I used the "RAZRi_Root_Windows" file, while rooting my phone went to the "warning bootloader unlocked" screen and it just loops forever from that screen, the bat file, showed that it successfully rooted my phone. I tried to fix it using rsd lite, but it never detects my phone, so I searched for a way to make my pc able to detect it, so I found I could use Intel xFSTK, installed it but still nothing it doesn't appear as shown in the tutorial, I even downloaded the dll file that it needed to run, but after running the xFSTK DLDR or something like that, the application is completely empty, and I saw it should show some tools to download something. Also tried using Linux Zorin, but it only says that my XT890 cannot be accessed and shows an usb error code.
I am able to enter the fastboot screen, the one you get by pressing POWER and VOLUME DOWN, also it charges my batter completely normal. Also my pc is able to show that the XT890 is connected, but only before installing the drivers and it shows the CD installer for the Motorola Device Manager and some other files (all this while looping), and if I enter the fastboot flash mode, it appears as "fastboot smi S", with a yellow triangle and an exclamation sign while in Windows device manager. It has Jelly Bean update from telcel (mexico), and I already have the xml.zip file to reinstall it.
I use windows 8.1 , and as mentioned Linux Zorin on my PC.
Could some help me with it...if you now how to fix it please list every single step on how to do it T_T, THANKS IN ADVANCE!!!!

It looks like the root method changed something bad in your system partition and that's why it won't boot up. First thing to do is installing the correct Motorola drivers. When in fastboot the device should be normally listed and could be acceded by fastboot. If fastboot is working well, use rsd lite to recover it or flash the system partition manually.
If everything is working well, consider installing a custom recovery and flashing a SuperSU zip for root access.

Hazou said:
It looks like the root method changed something bad in your system partition and that's why it won't boot up. First thing to do is installing the correct Motorola drivers. When in fastboot the device should be normally listed and could be acceded by fastboot. If fastboot is working well, use rsd lite to recover it or flash the system partition manually.
If everything is working well, consider installing a custom recovery and flashing a SuperSU zip for root access.
Click to expand...
Click to collapse
Thanks for answering!!
I've checked on some websites that if the phone is not detected by RSD Lite it maybe due to a bug in the phone's driver that happens only on windows 8/8.1, so I will try to do the same thing on windows 7 and see what happens...
Hope it works...T_T

weird_user said:
Thanks for answering!!
I've checked on some websites that if the phone is not detected by RSD Lite it maybe due to a bug in the phone's driver that happens only on windows 8/8.1, so I will try to do the same thing on windows 7 and see what happens...
Hope it works...T_T
Click to expand...
Click to collapse
That could be it.
I just noticed u have unlocked your bootloader. That means u have used fastboot earlier to get the unlock code into the device. So the drivers should work perfectly if u are in the good device modes. Try to flash the system_signed image manually though fastboot and see what happens ("fastboot flash system <path-to-system_signed-image>", u may need mFastboot for that(is inside the rsd-lite package))
Just for the record if u didn't know:
Adb: works only in selected recovery's and normal boot(sometimes in charging mode as well)
Fastboot: works only in AP fastboot mode (power+vol-down, black screen with white/blue text (rsd-lite needs this mode))
XFSTK: works only in medfield flash modues, something u don't need to be with that kind of error

Thanks again!!!
Hazou said:
That could be it.
I just noticed u have unlocked your bootloader. That means u have used fastboot earlier to get the unlock code into the device. So the drivers should work perfectly if u are in the good device modes. Try to flash the system_signed image manually though fastboot and see what happens ("fastboot flash system <path-to-system_signed-image>", u may need mFastboot for that(is inside the rsd-lite package))
Just for the record if u didn't know:
Adb: works only in selected recovery's and normal boot(sometimes in charging mode as well)
Fastboot: works only in AP fastboot mode (power+vol-down, black screen with white/blue text (rsd-lite needs this mode))
XFSTK: works only in medfield flash modues, something u don't need to be with that kind of error
Click to expand...
Click to collapse
Hazou said:
That could be it.
I just noticed u have unlocked your bootloader. That means u have used fastboot earlier to get the unlock code into the device. So the drivers should work perfectly if u are in the good device modes. Try to flash the system_signed image manually though fastboot and see what happens ("fastboot flash system <path-to-system_signed-image>", u may need mFastboot for that(is inside the rsd-lite package))
Just for the record if u didn't know:
Adb: works only in selected recovery's and normal boot(sometimes in charging mode as well)
Fastboot: works only in AP fastboot mode (power+vol-down, black screen with white/blue text (rsd-lite needs this mode))
XFSTK: works only in medfield flash modues, something u don't need to be with that kind of error
Click to expand...
Click to collapse
I am able to enter RECOVERY MODE NOW (I installed CWM, before this I was only able to see the android lying on the floor ans saty dead right there, I was supposed to press Volume + and - and the camera button at the same time, but nothing happened), it seems to be easier to unbrick it this way, but now the problem is that after I follow the steps to reinstall the original ROM, it aborts installation. I read this may be caused due to a file on the zip file, I looked for it, but nor the Folder META-INF, whic is supposed to contain a "update-script" file, nor that file is anywhere in the ROM folder...
I've even tried cyanogenmod (after first trying Telcel original ROM and then the retail GB ROM) cuz it actually contains the folder previously mentioned and the file is in a different path, but it is there, I modified it, but got a "Can't open tmd/update.zip (bad) Installation aborted" error...I don't know what else to do T_T...
Note: I also used sideload and CWM to install it, but the same thing happens. Also checked some other post about this issue, but none has helped me...

What zip file are u installing?
If u want to go back to stock, just use a RSD lite package for 4.1.2 or install TWRP and restore a TWRP backup to go to 4.4.2. There is no official RSD lite package for 4.4.2 and the update.zip doesn't work if your system doesn't boot already.

Hazou said:
What zip file are u installing?
If u want to go back to stock, just use a RSD lite package for 4.1.2 or install TWRP and restore a TWRP backup to go to 4.4.2. There is no official RSD lite package for 4.4.2 and the update.zip doesn't work if your system doesn't boot already.
Click to expand...
Click to collapse
It's done! Thanks!
I actually used another computer with windows 10, also I used RSD Lite and it worked just fine, now I have the stock ROM from Telcel and it it is working almost normal. The only abnormality I've seen is that my phone turns itself off when battery is at 20%, I searched info about that problem and it says I may re calibrate the battery, so it may work fine again, but now I need to root again to be able to do that T_T, hope it works this time...
THANKS! again!

My 3T went crazy and shut down by itself. Will only start up to the bootloader now.

This happened last night and my phone is currently running Paranoid Android with the latest TWRP and Magisk.
So I was holding my phone in my hand and when I checked my phone it was as if 5 pairs of hands were touching the screen. I was not touching the screen myself but the phone was opening all sorts of apps and locking itself and opening the app drawer in such a quick way that I could not even shut the phone down since when I tried to hold the power button to shut down the phone, I did not even have the time to press the power off option before the phone started going crazy again.
Once it reached about 5%, the phone shut off by itself. I've been trying to open it however it will only reach the bootloader screen. Once I try to open the phone to recovery or standard mode, the oneplus logo will appear but it will quickly shut down again after a few seconds. I tried flashing TWRP already but the phone still won't boot to recovery. The oneplus logo would appear but it just turns off around the time TWRP should be appearing.
Does this mean I bricked my phone? Is there any way to recover my photos and data currently on my phone?

Have you tried to leave the phone to charge overnight and then boot?
Check if TWRP boots with
Code:
fastboot boot twrp.img

Symbiotec said:
Does this mean I bricked my phone? Is there any way to recover my photos and data currently on my phone?
Click to expand...
Click to collapse
Unless you can at least boot TWRP (and then just mount storage or adb pull) I don't think you can retrieve much of anything.
It always surprises me that folks wait for a disaster (and then ask for recovery solutions), instead of regularly backing up the data that is important to you.

Honestly this sounds like hardware damage more than a software brick, can't be certain until the unbrick guide is done though. I have seen the same thing happen to other water damaged phones where it starts to randomly open applications then dies.

przemcio510 said:
Have you tried to leave the phone to charge overnight and then boot?
Check if TWRP boots with
Code:
fastboot boot twrp.img
Click to expand...
Click to collapse
I tried this however it said it could not find the file in the directory?

redpoint73 said:
Unless you can at least boot TWRP (and then just mount storage or adb pull) I don't think you can retrieve much of anything.
It always surprises me that folks wait for a disaster (and then ask for recovery solutions), instead of regularly backing up the data that is important to you.
Click to expand...
Click to collapse
I backup my files monthly, it just so happened that my phone went haywire a few days before I was gonna backup January's files.

ZVNexus said:
Honestly this sounds like hardware damage more than a software brick, can't be certain until the unbrick guide is done though. I have seen the same thing happen to other water damaged phones where it starts to randomly open applications then dies.
Click to expand...
Click to collapse
That's what I initially thought too. However, if it was hardware damage wouldn't that mean I couldn't open the bootloader?

Symbiotec said:
I tried this however it said it could not find the file in the directory?
Click to expand...
Click to collapse
Obviously you have to type twrp's .img file name or rename the file to twrp.img. Don't forget to download it first from https://twrp.me

Man i see kind of threads a lot lately. I feel there isn't any hardware damage, just people that don't know what they are doing or doing things wrong.
Download the twrp image and boot it through adb, if the oneplus logo appears than it HAS to at least boot the recovery. Also, before you do anything with your phone, considering it isn't the cheapest thing in the world(at least for me) do some reading first, it always helps.

Symbiotec said:
I tried this however it said it could not find the file in the directory?
Click to expand...
Click to collapse
That means you did it wrong.
As mentioned, the syntax has to be correct. If you use the command verbatim: fastboot boot twrp.img
Then the file has to be exactly named twrp.img and it needs to be located in the same folder where fastboot.exe is located (which is the same directory you need to be running the command from).
Also, if in Windows, and you renamed the file; make sure you have the Windows option disabled to hide known file extensions. It is usually enabled by default, so turn that option off! Otherwise, you may have unwittingly named the file "twrp.img.img" and not know it (the screen will show "twrp.img").
These are all common mistakes. But if your top post when you said "I tried flashing TWRP already but the phone still won't boot to recovery" it would have been more useful to tell us that if failed to flash.

przemcio510 said:
Obviously you have to type twrp's .img file name or rename the file to twrp.img. Don't forget to download it first from https://twrp.me
Click to expand...
Click to collapse
I tried running it in ADB and according to ADB, TWRP finished booting on the phone. The oneplus logo appeared with the text "fastboot mode" below it however the phone shuts down a few seconds after this screen appears. Is it still a problem in how I tried to boot the TWRP?

redpoint73 said:
That means you did it wrong.
As mentioned, the syntax has to be correct. If you use the command verbatim: fastboot boot twrp.img
Then the file has to be exactly named twrp.img and it needs to be located in the same folder where fastboot.exe is located (which is the same directory you need to be running the command from).
Also, if in Windows, and you renamed the file; make sure you have the Windows option disabled to hide known file extensions. It is usually enabled by default, so turn that option off! Otherwise, you may have unwittingly named the file "twrp.img.img" and not know it (the screen will show "twrp.img").
These are all common mistakes. But if your top post when you said "I tried flashing TWRP already but the phone still won't boot to recovery" it would have been more useful to tell us that if failed to flash.
Click to expand...
Click to collapse
My apologies. According to ADB the TWRP flash was successful however the phone still refuses to open in recovery.

Symbiotec said:
I tried running it in ADB and according to ADB, TWRP finished booting on the phone. The oneplus logo appeared with the text "fastboot mode" below it however the phone shuts down a few seconds after this screen appears. Is it still a problem in how I tried to boot the TWRP?
Click to expand...
Click to collapse
You were supposed to use fastboot command, is this what you meant?

przemcio510 said:
You were supposed to use fastboot command, is this what you meant?
Click to expand...
Click to collapse
I already performed the command in fastboot. Once the command was finished the oneplus logo appeared with the text "fastboot mode" below

I have "the same problem", but my OP I can turn on again.
I was using it with Ressurection Remix 7.1.2, so I tried to update to Z-Unleashed 8.0 and my problems start on this moment... So, I tried to reinstall the Ressurection, but it continue restarting .... I'm thining that's an hardware problem....

rodrigoo said:
I have "the same problem", but my OP I can turn on again.
I was using it with Ressurection Remix 7.1.2, so I tried to update to Z-Unleashed 8.0 and my problems start on this moment... So, I tried to reinstall the Ressurection, but it continue restarting .... I'm thining that's an hardware problem....
Click to expand...
Click to collapse
How did you fix the problem?

Symbiotec said:
How did you fix the problem?
Click to expand...
Click to collapse
I don't know. I think that it have emotions. Actually is working normally with Z-unleashed.
I entered in bootloader mode and:
"fastboot format -w system" (you'll lose all your data) and installed all again...
Default kernel...

Unlocking / Rooting Nokia 1 stock rom guide

Step 1 (Unlocking bootloader) :
Make sure you have adb and fastboot .
get your serial number.
Code:
adb shell getprop ro.serialno
calculate md5 of the serial number of device ( i used this https://passwordsgenerator.net/md5-hash-generator/).
Reboot bootloader.
Code:
adb reboot bootloader
Unlock using key (md5code=md5 of your serial number).
Code:
fastboot oem key md5code
Code:
fastboot oem unlock
Step 2 (flashing twrp fixing encryption problem):
Download twrp :=https://www.androidfilehost.com/?fid=1322778262903986803
Reboot bootloader by connecting power button + usb cable + volume down and type
Code:
fastboot flash recovery TWRP-3.2.3-TwrpBuilder-2018-08-21_14.img
.
Reboot recovery by using power button + usb connected + volume up at same time .
Download fstab:=> https://gist.githubusercontent.com/androidlover5842/e5fccc739251bb75ad7cf1d8ddc36e0d/raw/a4646983b481c02462cd0cfbf8decb9edf4f2ac9/fstab.mt6735 and go to mount menu in twrp => mount vendor and update fstab using this commnd .
Code:
adb push fstab.mt6735 /vendor/etc/fstab.mt6735
make backup of boot using backup option and flash stock recovery as boot (you can get stock recovery from here )
reboot system and it should reboot into stock recovery
wipe data using stock recovery
reboot back to twrp by pressing power + usb + volume button.
restore boot and flash magisk.
XDA:DevDB Information
Unlocking / Rooting Nokia 1 stock rom, Tool/Utility for the Nokia 1
Contributors
androidlover5842
Version Information
Status: Stable
Created 2018-08-21
Last Updated 2018-08-21

unlock failed
it seems the key did not work. Maybe imei is involved in generating key? (my Nokia 1 is dual sim)
---------- Post added at 11:44 PM ---------- Previous post was at 11:26 PM ----------
slim404 said:
it seems the key did not work. Maybe imei is involved in generating key? (my Nokia 1 is dual sim)
Click to expand...
Click to collapse
SOLVED.
I had to allow OEM unlocking in Developer Settings

androidlover5842 said:
Step 2 (flashing twrp fixing encryption problem):
reboot system and it should reboot into stock recovery
Click to expand...
Click to collapse
Hmm all good till this step, but the device stuck doesn't reboot into stock recovery but bootloop TWRP
Obviously i messed up something and i wonder what it is

ObviousSimple said:
Hmm all good till this step, but the device stuck doesn't reboot into stock recovery but bootloop TWRP
Obviously i messed up something and i wonder what it is
Click to expand...
Click to collapse
I got the same problem. I found out the recovery file he linked to was that of a single SIM Nokia 1 (TA-1060) mine is a Dual Sim Nokia 1 (TA-1047)
I downloaded the TA-1047 original firmware (I googled it)
I used it to reflash boot and recovery. Then redid everything using this time the right original recovery.bin from the TA-1047 firmware and it worked

Android Downgrade
I'm planning to buy this phone but I don't like the software. Can I install Android Kit Kat on it?

Hi! I have soft-bricked Nokia 1 ta-1047(recovery bootloop). How can i unlock bootloader without checkin OEM unlock in dev settings? Thks!

Hi! I had some trouble understanding the instructions. Step 1 worked without a hitch but I ran into some problems in step 2. I'd be really grateful for some help.
Do I copy the text in the link, paste it into a .txt file and then save it to "ftsab.mt6735" in the Minimal And Adb Fastboot folder on my pc?
Do I press cancel when twrp asks me for a password? Or do I need a password? I pressed cancel.
When I go into "mount" in twrp and click on "vendor" do I then go the command window on my pc (from the adb fastboot folder) and type "adb push fstab.mt6735 /vendor/etc/fstab.mt6735"? This is what I did and it might have come with an error I'm not sure.
What is the backup of boot for? I guess it's just a safety measure. For some reason I couldn't do that because it said something about encyption (I think, unless I'm getting mixed up with before) so I had to skip that step and go onto flashing the recovery. The instructions now say "flash stock recovery as boot (you can get stock recovery from here)". Is the stock recovery the "recovery.bin" file and do I put that in the adb and fastboot folder? I did that and typed "fastboot flash recovery recovery.bin" in the command window. Was that right or not?
The instuctions say "restart the system" Is that from the twrp menu? I restarted the phone via twrp but it didn't restart into stock recovery it restarted into the normal operating system. I knew then that I'd done something wrong. I then turned off the phone and tried accessing the stock recovery by pressing the volume up and power on and it started in twrp! Am I getting confused? Please can someone help me! Thank you!

anhadsingha said:
I'm planning to buy this phone but I don't like the software. Can I install Android Kit Kat on it?
Click to expand...
Click to collapse
No you can't and why would you want KitKat. Kitkat was good 5 versions ago
---------- Post added at 03:20 PM ---------- Previous post was at 03:17 PM ----------
mountainair said:
Hi! I had some trouble understanding the instructions. Step 1 worked without a hitch but I ran into some problems in step 2. I'd be really grateful for some help.
Do I copy the text in the link, paste it into a .txt file and then save it to "ftsab.mt6735" in the Minimal And Adb Fastboot folder on my pc?
Do I press cancel when twrp asks me for a password? Or do I need a password? I pressed cancel.
When I go into "mount" in twrp and click on "vendor" do I then go the command window on my pc (from the adb fastboot folder) and type "adb push fstab.mt6735 /vendor/etc/fstab.mt6735"? This is what I did and it might have come with an error I'm not sure.
What is the backup of boot for? I guess it's just a safety measure. For some reason I couldn't do that because it said something about encyption (I think, unless I'm getting mixed up with before) so I had to skip that step and go onto flashing the recovery. The instructions now say "flash stock recovery as boot (you can get stock recovery from here)". Is the stock recovery the "recovery.bin" file and do I put that in the adb and fastboot folder? I did that and typed "fastboot flash recovery recovery.bin" in the command window. Was that right or not?
The instuctions say "restart the system" Is that from the twrp menu? I restarted the phone via twrp but it didn't restart into stock recovery it restarted into the normal operating system. I knew then that I'd done something wrong. I then turned off the phone and tried accessing the stock recovery by pressing the volume up and power on and it started in twrp! Am I getting confused? Please can someone help me! Thank you!
Click to expand...
Click to collapse
If you're phone booted fine into system and you can access twrp then just flash magisk as you've done ok and the phone and twrp are working

How to "flash stock recovery as boot" ?
How to "flash stock recovery as boot" ? I went to fastboot mode and flashed recovery.bin then rebooted to recovery and it showed "no commands". No options were there.

ttocs99 said:
If you're phone booted fine into system and you can access twrp then just flash magisk as you've done ok and the phone and twrp are working
Click to expand...
Click to collapse
Thanks. But I'm still not sure. I confess I'm a novice. I actually ended up bricking my phone because I went on to do something wrong. I'll get another phone this week to try and root again, hopefully successfully this time. Isn't the step to make a backup of the boot really important because we have to flash that boot near the end? I thought it was necessary. I also wonder whether I should have typed "fastboot boot recovery.img" instead of "fastboot flash recovery recovery.img" because the instructions say "flash stock recovery as boot"? Edit: Perhaps I'm wrong again
madmax786 said:
How to "flash stock recovery as boot" ? I went to fastboot mode and flashed recovery.bin then rebooted to recovery and it showed "no commands". No options were there.
Click to expand...
Click to collapse
Did you manage to get a backup of the boot?

I can have no access in the udev/ etc.... Can you please explain the following steps how to do it? is it a linux command that needs to be done on a linux running computer or does it works on Windows too?
i was indeed happy that it completed the backup to my external SD Card made with Magisk a patched boot image, but doesn't seem to be rooted after all, what next? it says every time Magisk is not installed do i have to flash it in minimal ADB
Sincerely

Des.Coene said:
I can have no access in the udev/ etc.... Can you please explain the following steps how to do it? is it a linux command that needs to be done on a linux running computer or does it works on Windows too?
i was indeed happy that it completed the backup to my external SD Card made with Magisk a patched boot image, but doesn't seem to be rooted after all, what next? it says every time Magisk is not installed do i have to flash it in minimal ADB
Sincerely
Click to expand...
Click to collapse
Rooting this for now is a gamble there is only 1 stock ROM to flash and it's for the UK single SIM varient of the Nokia 1 only thing you can have is root and twrp and maybe flash a gsi but most of them are still buggy if you can flash stock and stay that way untill further development.

ttocs99 said:
Rooting this for now is a gamble there is only 1 stock ROM to flash and it's for the UK single SIM varient of the Nokia 1 only thing you can have is root and twrp and maybe flash a gsi but most of them are still buggy if you can flash stock and stay that way untill further development.
Click to expand...
Click to collapse
There seem to be buggy , certainly when 2 different chip sets are used in several Nokia 1 series
the mt6737 as i have & the mt6735 there's what i've been struggling with.
Thanks anyways for the advice
Sincerely

Des.Coene said:
There seem to be buggy , certainly when 2 different chip sets are used in several Nokia 1 series
the mt6737 as i have & the mt6735 there's what i've been struggling with.
Thanks anyways for the advice
Sincerely
Click to expand...
Click to collapse
I have the mt6735 but shouldn't be long for a custom ROM as root and twrp have been achieved.

madmax786 said:
How to "flash stock recovery as boot" ? I went to fastboot mode and flashed recovery.bin then rebooted to recovery and it showed "no commands". No options were there.
Click to expand...
Click to collapse
Hi,i got the exact same problem

ramnus said:
Hi,i got the exact same problem
Click to expand...
Click to collapse
Hi, try holding the power button for a few seconds and then releasing it and pressing volume up.
For the record, I managed to root my ta 1060 phone. Thanks everyone. I think I had a problem initially because twrp asked for a password due to phone encryption and I ignored it. I managed to bypass that password screen by not rebooting after flashing twrp, instead going straight into twrp and following the instructions.
I've now got a problem getting usb otg to work. I've added the files android.hardware.usb.host.xml, handheld_core_hardware.xml and tablet_core_hardware.xmls. It's showing as enabled in all the app checkers but Usb Otg Helper says E: Mount directory could not be created, E: This app will not work, OTG mass storage not supported?, NTFS write support failed(no fuse). That's not a topic for here though. If anyone can help, can they pm me please

Nokia 1 root
mountainair said:
Hi! I had some trouble understanding the instructions. Step 1 worked without a hitch but I ran into some problems in step 2. I'd be really grateful for some help.
Do I copy the text in the link, paste it into a .txt file and then save it to "ftsab.mt6735" in the Minimal And Adb Fastboot folder on my pc?
Do I press cancel when twrp asks me for a password? Or do I need a password? I pressed cancel.
When I go into "mount" in twrp and click on "vendor" do I then go the command window on my pc (from the adb fastboot folder) and type "adb push fstab.mt6735 /vendor/etc/fstab.mt6735"? This is what I did and it might have come with an error I'm not sure.
What is the backup of boot for? I guess it's just a safety measure. For some reason I couldn't do that because it said something about encyption (I think, unless I'm getting mixed up with before) so I had to skip that step and go onto flashing the recovery. The instructions now say "flash stock recovery as boot (you can get stock recovery from here)". Is the stock recovery the "recovery.bin" file and do I put that in the adb and fastboot folder? I did that and typed "fastboot flash recovery recovery.bin" in the command window. Was that right or not?
The instuctions say "restart the system" Is that from the twrp menu? I restarted the phone via twrp but it didn't restart into stock recovery it restarted into the normal operating system. I knew then that I'd done something wrong. I then turned off the phone and tried accessing the stock recovery by pressing the volume up and power on and it started in twrp! Am I getting confused? Please can someone help me! Thank you!
Click to expand...
Click to collapse
Have you found password ?

Help please
Des.Coene said:
There seem to be buggy , certainly when 2 different chip sets are used in several Nokia 1 series
the mt6737 as i have & the mt6735 there's what i've been struggling with.
Thanks anyways for the advice
Sincerely
Click to expand...
Click to collapse
Buddy is there anyway I could get stock or custom rom to bootup my bricked MT6737 TA1056 ??
I’m stuck in a blank screen and vibration

xdakanwal said:
Have you found password ?
Click to expand...
Click to collapse
No, when I found it asked for a password I realised I shouldn't have rebooted the system and so I wiped the data and flashed twrp again and no more password.

My TA-1066 is basically dead. Unlocked, doesn't boot into recovery, flashing the ROM fixed it last time this happened. Now it doesnt. In a bootloop with the NOKIA logo.
Help would be really appreciated.
---------- Post added at 07:23 AM ---------- Previous post was at 07:23 AM ----------
My TA-1066 is basically dead. Unlocked, doesn't boot into recovery, flashing the ROM fixed it last time this happened. Now it doesnt. In a bootloop with the NOKIA logo.
Help would be really appreciated.

Question Redmi Note 11 Stuck/boot loop in Recovery mode

I need help, I did some research but I couldn't find a solution to my problem.
I know that others have a problem with rebooting to recovery when unlocking, but my problem is different. My phone is just stuck in a loop into recovery mode and won't boot normally even in safemode.
I haven't tried wiping the data yet because I want to save my files. Do you have a solution for this?
I turned on USB debugging before this bootloop happened.

mhegz said:
I need help, I did some research but I couldn't find a solution to my problem.
I know that others have a problem with rebooting to recovery when unlocking, but my problem is different. My phone is just stuck in a loop into recovery mode and won't boot normally even in safemode.
I haven't tried wiping the data yet because I want to save my files. Do you have a solution for this?
I turned on USB debugging before this bootloop happened.
Click to expand...
Click to collapse
How exactly did you set up your custom recovery, and when exactly did it stop working? (has the recovery ever worked normally for you?)

Sheist! said:
How exactly did you set up your custom recovery, and when exactly did it stop working? (has the recovery ever worked normally for you?)
Click to expand...
Click to collapse
I didn't do anything, I just charged my phone while it was turned off. Then I turned on the phone and the same thing happened as with others where when I unlocked it from the lock screen, the phone restarted and that's what happened.
Edit:
I saw this in another thread, we have the same problem.
KMS45 said:
Hello to everyone,
So basically i read all the 10 pages of this thread and I have not found someone that have the same problem as me. I have the “bootloop” but the thing is that my phone is not even turning on. It is just booting and going back to the recovery menu. So I choose the reboot option but still coming back to the menu. I have already turned on the debug usb option because I used to be using it before my phone dies. I have a Xiaomi MI10 Lite 5G. I also tried the MiAssisstant but no succes because device not detected.
If someone have a solution without wiping all my precious data pls ?
Click to expand...
Click to collapse
KMS45 said:
Here is a video to understand what is happening when:
Reboot:
https://imgur.com/a/rB9QhSZ
Safe Mode:
https://imgur.com/a/X0KH5AD
Click to expand...
Click to collapse

mhegz said:
I didn't do anything, I just charged my phone while it was turned off. Then I turned on the phone and the same thing happened as with others where when I unlocked it from the lock screen, the phone restarted and that's what happened.
Click to expand...
Click to collapse
If you have your phone to automatically install updates, it might have done exactly that, and it borked. i.e. incomplete installation. There is no recovery partition on the spes so the boot image is potentially whacked. Try reflashing boot and dtmo and vbmeta images in Fastboot from your current ROM. That should get you back to where you were.

Sheist! said:
If you have your phone to automatically install updates, it might have done exactly that, and it borked. i.e. incomplete installation. There is no recovery partition on the spes so the boot image is potentially whacked. Try reflashing boot and dtmo and vbmeta images in Fastboot from your current ROM. That should get you back to where you were.
Click to expand...
Click to collapse
Sorry, I'm not really knowledgeable about this. Can you guide me or give me a link on how to do it? I don't have any experience in flashing through fastboot but earlier, I tried using ADB to check if my device is being recognized and I think it was recognized.
And also, I don't know which firmware to download or what is the current version of my phone because I only know the basic details of my device like this is Redmi Note 11 6/128 4G, I think this is the global version, and by the way, I'm from the Philippines.

mhegz said:
Sorry, I'm not really knowledgeable about this. Can you guide me or give me a link on how to do it? I don't have any experience in flashing through fastboot but earlier, I tried using ADB to check if my device is being recognized and I think it was recognized.
And also, I don't know which firmware to download or what is the current version of my phone because I only know the basic details of my device like this is Redmi Note 11 6/128 4G, I think this is the global version, and by the way, I'm from the Philippines.
Click to expand...
Click to collapse
Enter fastboot, check your phone is unlocked.
fastboot getvar unlocked (response will be unlocked: yes)
If you are global, then get the fastboot version from here: https://xiaomifirmwareupdater.com/miui/spes/stable/V13.0.12.0.SGCMIXM/
This one is mine. Be careful you get the non-4g-in-the-name ROM for your 4g phone if yours is like mine:
Xiaomi Redmi Note 11 - Full phone specifications
www.gsmarena.com
Beware of the other one that has a Mediatek processor and has 4G in the name and is NOT my phone type: https://www.gsmarena.com/xiaomi_redmi_note_11_4g-11241.php
If this one fails to get you booted at the end, drop back a version and try that one. Check your phone box to see what region version phone you bought.
Unpack it to a folder and get the images for boot, dtbo and vbmeta. Put these files into your adb/platorm-tools directory in Windows. (you will need the boot and vbmeta images later if you choose to install Magisk) Since you ran adb already, then you must already have adb installed.
Open command prompt as root, change to that platform-tools directory.
fastboot devices (to ensure Windows sees you)
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
Reboot system.
If this gets you booted, run Device Info HW app to see what version is actually installed, and look under About Phone as well.
EDIT: I corrected the 3 command lines above.

Sheist! said:
Enter fastboot, check your phone is unlocked.
fastboot getvar unlocked (response will be unlocked: yes)
If you are global, then get the fastboot version from here: https://xiaomifirmwareupdater.com/miui/spes/stable/V13.0.12.0.SGCMIXM/
This one is mine. Be careful you get the non-4g-in-the-name ROM for your 4g phone if yours is like mine:
Xiaomi Redmi Note 11 - Full phone specifications
www.gsmarena.com
Beware of the other one that has a Mediatek processor and has 4G in the name and is NOT my phone type: https://www.gsmarena.com/xiaomi_redmi_note_11_4g-11241.php
If this one fails to get you booted at the end, drop back a version and try that one. Check your phone box to see what region version phone you bought.
Unpack it to a folder and get the images for boot, dtbo and vbmeta. Put these files into your adb/platorm-tools directory in Windows. (you will need the boot and vbmeta images later if you choose to install Magisk) Since you ran adb already, then you must already have adb installed.
Open command prompt as root, change to that platform-tools directory.
fastboot devices (to ensure Windows sees you)
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
Reboot system.
If this gets you booted, run Device Info HW app to see what version is actually installed, and look under About Phone as well.
EDIT: I corrected the 3 command lines above.
Click to expand...
Click to collapse
Sorry for the delayed reply.
It seems that my bootloader is still locked, so I cannot flash it using fastboot. Is that correct?
Is there a way to flash my device without losing my files? I really need to get my files

mhegz said:
Sorry for the delayed reply.
It seems that my bootloader is still locked, so I cannot flash it using fastboot. Is that correct?
Is there a way to flash my device without losing my files? I really need to get my files
Click to expand...
Click to collapse
Then ignore my steps, since they won't work on a locked bootloader. I will defer to others who have clues regarding a locked bootloader and a down system.
You COULD try to unlock it, but that would definitely wipe all your data:
"Unlocking the bootloader will wipe all data"
Get the unlock tool and instructions here, if you so choose anyway:
Apply for permissions to unlock Mi devices
en.miui.com
NOTE: that gives you unlock version 6.5.224.28 but it might/should prompt you after install to install the updated version since mine is 6.5.406.31 from April of 2022. When you run it, it makes you wait a week.
NOTE 2: It does state this warning, however:
"First, confirm that your device can be unlocked
Your device functions normally and not in a bricked, soft-bricked, bootloop state."

mhegz said:
I need help, I did some research but I couldn't find a solution to my problem.
I know that others have a problem with rebooting to recovery when unlocking, but my problem is different. My phone is just stuck in a loop into recovery mode and won't boot normally even in safemode.
I haven't tried wiping the data yet because I want to save my files. Do you have a solution for this?
I turned on USB debugging before this bootloop happened.
Click to expand...
Click to collapse
I am facing same problem my phone is stuck in recovery mode it keeps rebooting I have tried selecting safe mode recovery reboot but it keeps rebooting did you find a solution to this problem please let me know.Thank you.