Related
Hey,guys! I uesd fastboot to flash system,but it failed
code:
target max-sparse-size: 256MB
sending 'system' (256598 KB)...
OKAY [ 8.040s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 18.249s
anyone can help me please?
YOUNG MAN. said:
Hey,guys! I uesd fastboot to flash system,but it failed
code:
target max-sparse-size: 256MB
sending 'system' (256598 KB)...
OKAY [ 8.040s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 18.249s
anyone can help me please?
Click to expand...
Click to collapse
Try to use the mfastboot, because the system.img is to big to use the normal fastboot
libnijunior said:
Try to use the mfastboot, because the system.img is to big to use the normal fastboot
Click to expand...
Click to collapse
it failed too
code
target reported max download size of 536870912 bytes
sending 'system' (256089 KB)...
OKAY [ 8.035s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 13.062s
and sometimes it shows
target reported max download size of 536870912 bytes
sending 'system' (256598 KB)...
OKAY [ 8.046s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 13.224s
YOUNG MAN. said:
it failed too
code
target reported max download size of 536870912 bytes
sending 'system' (256089 KB)...
OKAY [ 8.035s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 13.062s
and sometimes it shows
target reported max download size of 536870912 bytes
sending 'system' (256598 KB)...
OKAY [ 8.046s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 13.224s
Click to expand...
Click to collapse
What version of boot loader do you have? If you already flashed the boot loader of 5.0.2 and you are trying to flash older system images that error appears.
juliospinoza said:
What version of boot loader do you have? If you already flashed the boot loader of 5.0.2 and you are trying to flash older system images that error appears.
Click to expand...
Click to collapse
I Just bought this phone yesterday and it was 5.0 when i got it. Then i updated to 5.1 and the BL version is 60.14 now . I tried to back to 5.0 so it showed this error.
Do you have any way to solve this problem? My phone is bootloop now.
Thanx
YOUNG MAN. said:
I Just bought this phone yesterday and it was 5.0 when i got it. Then i updated to 5.1 and the BL version is 60.14 now . I tried to back to 5.0 so it showed this error.
Do you have any way to solve this problem? My phone is bootloop now.
Thanx
Click to expand...
Click to collapse
you really shouldn't downgrade unless you know what you are doing.
Is the bootloader unlocked? Can you get into bootloader mode?
JulesJam said:
you really shouldn't downgrade unless you know what you are doing.
Is the bootloader unlocked? Can you get into bootloader mode?
Click to expand...
Click to collapse
Yes,it is unlocked and i can get into fastboot mode .Is that bootlodader mode?
YOUNG MAN. said:
Yes,it is unlocked and i can get into fastboot mode .Is that bootlodader mode?
Click to expand...
Click to collapse
Yes, they are synonyms. I would install Motorola Device Manager to your PC and let it attempt to repair your phone.
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
If it doesn't repair your phone, post back here.
YOUNG MAN. said:
Yes,it is unlocked and i can get into fastboot mode .Is that bootlodader mode?
Click to expand...
Click to collapse
I installed Motorola Device Manager, what should i do next?
JulesJam said:
you really shouldn't downgrade unless you know what you are doing.
Is the bootloader unlocked? Can you get into bootloader mode?
Click to expand...
Click to collapse
I installed Motorola Device Manager and tried again, it still did't work.
code:
C:\Users\Alan\Desktop\ccc>fastboot flash system F:\XT1095\system.img_sparsechunk
.0
target max-sparse-size: 256MB
sending 'system' (256598 KB)...
OKAY [ 8.047s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 13.217s
YOUNG MAN. said:
I installed Motorola Device Manager and tried again, it still did't work.
Click to expand...
Click to collapse
Did it detect your device at all? Did it try to repair it?
YOUNG MAN. said:
C:\Users\Alan\Desktop\ccc>fastboot flash system F:\XT1095\system.img_sparsechunk
.0
target max-sparse-size: 256MB
sending 'system' (256598 KB)...
OKAY [ 8.047s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 13.217s
Click to expand...
Click to collapse
If you are only trying to flash small sparsechunks, have you tried flashing using the latest version of fastboot from Root Junky's site?
http://rootjunkysdl.com/?device=Adb Fastboot Files
Go into developer options and enable OEM unlocking. Then try it.
Edit: Forgot you said you were bootlooped. Can you install the 5.1 image again?
Sent from my XT1095
JulesJam said:
Did it detect your device at all? Did it try to repair it?
If you are only trying to flash small sparsechunks, have you tried flashing using the latest version of fastboot from Root Junky's site?
Click to expand...
Click to collapse
NO,It not detect my phone,it just search new software when i open it.
And I tried the latest version of fastboot,still failed
YOUNG MAN. said:
NO,It not detect my phone,it just search new software when i open it.
And I tried the latest version of fastboot,still failed
Click to expand...
Click to collapse
Did you try RSDLite?
JulesJam said:
Did you try RSDLite?
Click to expand...
Click to collapse
it can't detect my phone
YOUNG MAN. said:
it can't detect my phone
Click to expand...
Click to collapse
When you are in recovery, what does
adb devices
show you? Of course when you open the cmd window you have to navigate to a folder where adb.exe and the other required files are stored in order to use adb commands.
JulesJam said:
When you are in recovery, what does
adb devices
show you? Of course when you open the cmd window you have to navigate to a folder where adb.exe and the other required files are stored in order to use adb commands.
Click to expand...
Click to collapse
it shows View attachment 3294009
but in fastboot mode it shows View attachment 3294012
and my recovery is TWRP 2.8.60
YOUNG MAN. said:
it shows View attachment 3294009
but in fastboot mode it shows View attachment 3294012
and my recovery is TWRP 2.8.60
Click to expand...
Click to collapse
No I mean, connect your phone to your PC when you are in TWRP. Then open a command window. Then navigate to where adb.exe is stored - i.e, at the command prompt type in cd c:\[fill in the directory where adb.exe is stored]
then when you are at the proper directory, at the command prompt in the command window type:
adb devices
then hit enter.
It should return the serial number of your device.
JulesJam said:
No I mean, connect your phone to your PC when you are in TWRP. Then open a command window. Then navigate to where adb.exe is stored - i.e, at the command prompt type in cd c:\[fill in the directory where adb.exe is stored]
then when you are at the proper directory, at the command prompt in the command window type:
adb devices
then hit enter.
It should return the serial number of your device.
Click to expand...
Click to collapse
it shows this:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
device
dustin_b said:
Go into developer options and enable OEM unlocking. Then try it.
Edit: Forgot you said you were bootlooped. Can you install the 5.1 image again?
Sent from my XT1095
Click to expand...
Click to collapse
NO,my recovery is TWRP now ,and I can't flash the original recovery ,it failed.
So I have an LG D415 and I don't know if it's bricked, softbricked, hardbricked or whatever, i'm really a noob and would really appreciate some help, I've included a picture, that shows what pops up when I try entering "Download mode" but I've already tried flashing the KDZ files, I've tried factory resetting the phone, nothing seems to work, phone always shows 0% battery even after charging for over an hour, and so I tried getting into the fastboot commands and stuff, I extracted the laf dz from the kdz files, renamed it to laf.img, put it in the same folder as my fastboot drivers (not even sure if I have the correct drivers) I open up command prompt inside the folder, type in "Fastboot flash laf laf.img" and the following appears in cmd:
target reported max download size of 536870912 bytes
sending 'laf' (13312 KB)...
OKAY [ 0.586s]
writing 'laf'...
FAILED (remote: unknown command)
finished. total time: 0.739s
I feel like I am missing something or missing some steps, I've got the laf partition, the fastboot drivers(I think) phones in fastboot mode even though at the top it says download mode, no idea as to what to do or try next, if anybody could help it would be very much appreciated...
https://drive.google.com/file/d/0B0shRlbnxbQpTFhYTnpnX3RhVUE/view?usp=sharing
SMOKYxPANDA said:
So I have an LG D415 and I don't know if it's bricked, softbricked, hardbricked or whatever, i'm really a noob and would really appreciate some help, I've included a picture, that shows what pops up when I try entering "Download mode" but I've already tried flashing the KDZ files, I've tried factory resetting the phone, nothing seems to work, phone always shows 0% battery even after charging for over an hour, and so I tried getting into the fastboot commands and stuff, I extracted the laf dz from the kdz files, renamed it to laf.img, put it in the same folder as my fastboot drivers (not even sure if I have the correct drivers) I open up command prompt inside the folder, type in "Fastboot flash laf laf.img" and the following appears in cmd:
target reported max download size of 536870912 bytes
sending 'laf' (13312 KB)...
OKAY [ 0.586s]
writing 'laf'...
FAILED (remote: unknown command)
finished. total time: 0.739s
I feel like I am missing something or missing some steps, I've got the laf partition, the fastboot drivers(I think) phones in fastboot mode even though at the top it says download mode, no idea as to what to do or try next, if anybody could help it would be very much appreciated...
https://drive.google.com/file/d/0B0shRlbnxbQpTFhYTnpnX3RhVUE/view?usp=sharing
Click to expand...
Click to collapse
What ROM are you using? I think you should try flashing the bootstack with recovery from here >> https://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632. When you flash the bootstack, recovery gets rewritten with an old version of twrp so you probably want to have an IMG of twrp to update to the latest version.
0000.0000.00 said:
What ROM are you using? I think you should try flashing the bootstack with recovery from here >> https://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632. When you flash the bootstack, recovery gets rewritten with an old version of twrp so you probably want to have an IMG of twrp to update to the latest version.
Click to expand...
Click to collapse
I'm not aware of what ROM the phone is using, and I don't even know if the bootloader is unlocked, or if the phone has TWRP or root, and I don't want to mess the phone up even more (if that's even possible) phone was a friends and he gave it to me, said I could keep it if I could fix it, and i don't currently have a working phone, so it would be really nice to fix this one, i'm really a noob when it comes to this stuff, but I'm willing to learn if that's what it takes to fix the phone, I also included a link that shows a picture of the information that appears when i type in "fastboot getvar all" in command, not sure if that could help you
https://drive.google.com/file/d/0B0shRlbnxbQpR09LNDljU0k0dWM/view?usp=sharing
SMOKYxPANDA said:
I'm not aware of what ROM the phone is using, and I don't even know if the bootloader is unlocked, or if the phone has TWRP or root, and I don't want to mess the phone up even more (if that's even possible) phone was a friends and he gave it to me, said I could keep it if I could fix it, and i don't currently have a working phone, so it would be really nice to fix this one, i'm really a noob when it comes to this stuff, but I'm willing to learn if that's what it takes to fix the phone, I also included a link that shows a picture of the information that appears when i type in "fastboot getvar all" in command, not sure if that could help you
https://drive.google.com/file/d/0B0shRlbnxbQpR09LNDljU0k0dWM/view?usp=sharing
Click to expand...
Click to collapse
So the first to do is run the command fastboot oem unlock with the phone connected to your computer with fastboot. Then download the latest twrp from https://dl.twrp.me/w7/twrp-3.1.1-0-w7.img and flash it with fastboot flash recovery twrp-3.1.1-0-w7.img making sure that you move the twrp IMG to the directory where fastboot is unless fastboot is on your path where you can just flash it from cmd in the downloads folder. After that, try to factory reset the phone and it should boot into twrp where I would flash the lollipop bootstack linked above with adb sideload "zip name here" where you put the full filename of the zip in zip name here and remove the quotes, boot into the download mode thing which is fastboot and reflash recovery with the instructions above.
---------- Post added at 11:07 AM ---------- Previous post was at 11:02 AM ----------
Also, are you trying to save any data?
0000.0000.00 said:
So the first to do is run the command fastboot oem unlock with the phone connected to your computer with fastboot. Then download the latest twrp from https://dl.twrp.me/w7/twrp-3.1.1-0-w7.img and flash it with fastboot flash recovery twrp-3.1.1-0-w7.img making sure that you move the twrp IMG to the directory where fastboot is unless fastboot is on your path where you can just flash it from cmd in the downloads folder. After that, try to factory reset the phone and it should boot into twrp where I would flash the lollipop bootstack linked above with adb sideload "zip name here" where you put the full filename of the zip in zip name here and remove the quotes, boot into the download mode thing which is fastboot and reflash recovery with the instructions above.
---------- Post added at 11:07 AM ---------- Previous post was at 11:02 AM ----------
Also, are you trying to save any data?
Click to expand...
Click to collapse
No, i'm not trying to save any data, I want a fresh start, the problem when trying the "fastboot oem unlock" command is that it gives me an error, again i put a link below to show you what appears when trying that command..
https://drive.google.com/file/d/0B0shRlbnxbQpeFlxcWxjS0l1eE0/view?usp=sharing
This is what appears on the phone, yet nothing happens
https://drive.google.com/file/d/0B0shRlbnxbQpQzVXMjZ4d3E5S3M/view?usp=sharing
SMOKYxPANDA said:
This is what appears on the phone, yet nothing happens
https://drive.google.com/file/d/0B0shRlbnxbQpQzVXMjZ4d3E5S3M/view?usp=sharing
Click to expand...
Click to collapse
Something probably happened..
Can you please send the results of fastboot getvar all so I can check.
I had already sent it, but here it is again:
https://drive.google.com/file/d/0B0shRlbnxbQpR09LNDljU0k0dWM/view
SMOKYxPANDA said:
I had already sent it, but here it is again:
https://drive.google.com/file/d/0B0shRlbnxbQpR09LNDljU0k0dWM/view
Click to expand...
Click to collapse
Could you please run fastboot oem device-info and send me an image of the result. I am just checking if the bootloader got unlocked.
0000.0000.00 said:
Could you please run fastboot oem device-info and send me an image of the result. I am just checking if the bootloader got unlocked.
Click to expand...
Click to collapse
This is the only response I get:
...
FAILED (remote: unkown command)
finished. total time: 0.002s
SMOKYxPANDA said:
This is the only response I get:
...
FAILED (remote: unkown command)
finished. total time: 0.002s
Click to expand...
Click to collapse
Then try flashing twrp and the bootstack and Tell me how it goes from there.
0000.0000.00 said:
Could you please run fastboot oem device-info and send me an image of the result. I am just checking if the bootloader got unlocked.
Click to expand...
Click to collapse
0000.0000.00 said:
Then try flashing twrp and the bootstack and Tell me how it goes from there.
Click to expand...
Click to collapse
How can I flash TWRP?
I've got a TWRP file named "TWRP_2.8.0.0_26.09.14_L90.img"
Tell me where to go from there, and also, the phone isn't even detected using the command "adb devices" it says list of devices and does'nt ever show anything...
SMOKYxPANDA said:
How can I flash TWRP?
I've got a TWRP file named "TWRP_2.8.0.0_26.09.14_L90.img" Tell me where to go from there, and also, the phone isn't even detected using the command "adb devices" it says list of devices and does'nt ever show anything...
Click to expand...
Click to collapse
Flash twrp by first moving the twrp IMG to where fastboot is and running fastboot flash recovery TWRP_2.8.0.0_26.09.14_L90.img with the phone in the download mode thing and connected to the computer.
Also, could you please re-run fastboot getvar all even if you have already run it because its output probably changed and send me an image of what it shows.
---------- Post added at 02:51 PM ---------- Previous post was at 02:43 PM ----------
0000.0000.00 said:
Flash twrp by first moving the twrp IMG to where fastboot is and running fastboot flash recovery TWRP_2.8.0.0_26.09.14_L90.img with the phone in the download mode thing and connected to the computer.
Also, could you please re-run fastboot getvar all even if you have already run it because its output probably changed and send me an image of what it shows.
Click to expand...
Click to collapse
After that, run fastboot reboot recovery to reboot into recovery. Press the advanced button and then press the button that says adb sideload with the touchscreen and start it. Then to install the zip run adb sideload zipname where zipname is the name of the zip you want to flash.
After that boot back into the download mode thing to reflash recovery and then reboot into recovery with fastboot reboot recovery. After that I would flash the zips for a ROM and optionally gapps with adb sideload.
This is what I get:
https://drive.google.com/file/d/0B0shRlbnxbQpN3ZrendPbkI4R1k/view?usp=sharing
SMOKYxPANDA said:
This is what I get:
https://drive.google.com/file/d/0B0shRlbnxbQpN3ZrendPbkI4R1k/view?usp=sharing
Click to expand...
Click to collapse
Were you able to flash recovery and boot into it?
0000.0000.00 said:
Were you able to flash recovery and boot into it?
Click to expand...
Click to collapse
No, you can observe in the picture where it gives me the same error message, unknown command
SMOKYxPANDA said:
No, you can observe in the picture where it gives me the same error message, unknown command
Click to expand...
Click to collapse
Could you please send me a picture of the output of fastboot devices.
---------- Post added at 08:52 PM ---------- Previous post was at 08:48 PM ----------
I think the fastboot on the phone has issues because it seems to not flash anything. I think you should try this >>> https://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
guys, i am in the exact same situation..phone stuck on lg logo, no recovery possible, no download mode available, only fastboot
i have downloaded and extracted the img files from the original firmware, but i cannot do anything with flashboot commands..pls see below
Microsoft Windows [Version 10.0.15063]
(c) 2017 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
c369bc71 fastboot
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock
...
OKAY [ 5.029s]
finished. total time: 5.029s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Charger screen enabled: false
OKAY [ 0.005s]
finished. total time: 0.005s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash laf laf.img
target reported max download size of 536870912 bytes
sending 'laf' (15872 KB)...
OKAY [ 0.501s]
writing 'laf'...
FAILED (remote: flash write failure)
finished. total time: 5.531s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp.img
target reported max download size of 536870912 bytes
sending 'recovery' (13824 KB)...
OKAY [ 0.437s]
writing 'recovery'...
FAILED (remote: flash write failure)
finished. total time: 5.469s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
all:
finished. total time: 0.003s
C:\Program Files (x86)\Minimal ADB and Fastboot>
asahi7 said:
guys, i am in the exact same situation..phone stuck on lg logo, no recovery possible, no download mode available, only fastboot
i have downloaded and extracted the img files from the original firmware, but i cannot do anything with flashboot commands..pls see below
Microsoft Windows [Version 10.0.15063]
(c) 2017 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
c369bc71 fastboot
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem unlock
...
OKAY [ 5.029s]
finished. total time: 5.029s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Charger screen enabled: false
OKAY [ 0.005s]
finished. total time: 0.005s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash laf laf.img
target reported max download size of 536870912 bytes
sending 'laf' (15872 KB)...
OKAY [ 0.501s]
writing 'laf'...
FAILED (remote: flash write failure)
finished. total time: 5.531s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp.img
target reported max download size of 536870912 bytes
sending 'recovery' (13824 KB)...
OKAY [ 0.437s]
writing 'recovery'...
FAILED (remote: flash write failure)
finished. total time: 5.469s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
all:
finished. total time: 0.003s
C:\Program Files (x86)\Minimal ADB and Fastboot>
Click to expand...
Click to collapse
Try https://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
thanks, already did, unfortunately seems like there is a problem with the rom. i flash each file but when i test again i always get slb1 corrupt. no recovery, no download mode. it was worth the try
Here is the thing, RM3 launched in india week ago, and it had lot of bugs, capacitive button YouTube, finger print find in page chrome, sub standard camera app and loads of other bugs, So i downloaded the Chinese ROM v2.30 and put it in root storage of phone, I did not unlock bootloader or Enable USB debugging, Installed the ROM, the installation went smooth, and the device did not boot, ERROR THE DEVICE IS CORRUPT IT CANNOT BE TRUSTED, AND WILL NOT BOOT, VISIT THE LINK etc. a common error on RM3 Devices, i tried everything on this post https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page2 and this https://www.getdroidtips.com/nubia-emergency-tool-unbrick/ and many other methods as well, the main difference here is the My device is not Bootloader unlocker is NOT rooted is not USB debugging enabled, Only positive is that i can install few things via FASTBOOT, except RECOVERY which is obviously locked. KINDLY HLEP
try to flash official recovery, extracted from the from that you installed.
after extraction, you would be able to see recovry.img thats the official recovery, wipe cache and data restart, probably it should work.
or download the global rom and install it via OTG.
No such options
Psychotic0666 said:
try to flash official recovery, extracted from the from that you installed.
after extraction, you would be able to see recovry.img thats the official recovery, wipe cache and data restart, probably it should work.
or download the global rom and install it via OTG.
Click to expand...
Click to collapse
Dude thanks, but i dont have WIPE CACHE RESTART OPTIONS, plus i cant boot into any recovery TWRP or CHINESE stock, Thankfully i found a way to unlock bootloader i guess via FASTBOOT, , still no response and unable to get into OTG OR DATA RESET OR CACHE RESET OPTIONS
Here is the list of options i got.
REBOOT SYSTEM NOW = BOOTLOOP AGAIN
REBOOT TO RECOVERY MODE = BOOTLOOP AGAIN
REBOOT TO EMEG RECOVERY MODE = Black Screen no response.
BOOT TO EDLOAD = Success as PC detects the phone as a Qualcomm Device, NUBIA Recovery soft (Very old) also detects phone
POwer off = Bootloop AGAIN
KIndly help
thel'vadam said:
Here is the thing, RM3 launched in india week ago, and it had lot of bugs, capacitive button YouTube, finger print find in page chrome, sub standard camera app and loads of other bugs, So i downloaded the Chinese ROM v2.30 and put it in root storage of phone, I did not unlock bootloader or Enable USB debugging, Installed the ROM, the installation went smooth, and the device did not boot, ERROR THE DEVICE IS CORRUPT IT CANNOT BE TRUSTED, AND WILL NOT BOOT, VISIT THE LINK etc. a common error on RM3 Devices, i tried everything on this post https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page2 and this https://www.getdroidtips.com/nubia-emergency-tool-unbrick/ and many other methods as well, the main difference here is the My device is not Bootloader unlocker is NOT rooted is not USB debugging enabled, Only positive is that i can install few things via FASTBOOT, except RECOVERY which is obviously locked. KINDLY HLEP
Click to expand...
Click to collapse
Hi, maybe you should flash the stock recovery and then try to update your system. You can't directly flash a global version to a Chinese version, they sign with different key I think.
Did you try to flash official recovery extracted from the zip.
Fastboot flash recovery recovery.img?
---------- Post added at 09:13 AM ---------- Previous post was at 09:10 AM ----------
I had the same problem, flashing official recovery helped me to get the recovery working again and then i flashed the global rom.. It worked for me.
JerryYin said:
Hi, maybe you should flash the twrp and use twrp to flash the stock udate package, the RM3 twrp can flash stock ota
package
Click to expand...
Click to collapse
Yep tried that shows success, even on locked bootloader, since my fastboot can be unlocked via CMD, i can push any recovery into the phone, the issue is, i cant boot into recovery using any key / menu combination.
Psychotic0666 said:
Did you try to flash official recovery extracted from the zip.
Fastboot flash recovery recovery.img?
---------- Post added at 09:13 AM ---------- Previous post was at 09:10 AM ----------
I had the same problem, flashing official recovery helped me to get the recovery working again and then i flashed the global rom.. It worked for me.
Click to expand...
Click to collapse
Yep tried that shows success, even on locked bootloader, since my fastboot can be unlocked via CMD, i can push any recovery into the phone, the issue is, i cant boot into recovery using any key / menu combination.
JerryYin said:
Hi, maybe you should flash the stock recovery and then try to update your system. You can't directly flash a global version to a Chinese version, they sign with different key I think.
Click to expand...
Click to collapse
thel'vadam said:
Yep tried that shows success, even on locked bootloader, since my fastboot can be unlocked via CMD, i can push any recovery into the phone, the issue is, i cant boot into recovery using any key / menu combination.
Click to expand...
Click to collapse
My suggestion is that flash the global version recovery first, and see if it can boot.
JerryYin said:
My suggestion is that flash the global version recovery first, and see if it can boot.
Click to expand...
Click to collapse
Tried that now, still unable to get into new recovery settings, im stuck with the same options as mentioned above,
thel'vadam said:
Tried that now, still unable to get into new recovery settings, im stuck with the same options as mentioned above,
Click to expand...
Click to collapse
How about use fastboot commands?
fastboot boot "your recovery file"
Or flash the recovery into boot section?
fastboot flash boot "your recovery file"
JerryYin said:
How about use fastboot commands?
fastboot boot "your recovery file"
Or flash the recovery into boot section?
fastboot flash boot "your recovery file"
Click to expand...
Click to collapse
Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem nubia_unlock NUBIA_NX629J
...
FAILED (remote: Device already : unlocked!)
finished. total time: 0.004s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 2.130s]
booting...
FAILED (remote: unknown command)
finished. total time: 2.134s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot recovery.img
target reported max download size of 805306368 bytes
sending 'boot' (98304 KB)...
OKAY [ 2.127s]
writing 'boot'...
OKAY [ 0.627s]
finished. total time: 2.757s
C:\Program Files (x86)\Minimal ADB and Fastboot>
NOTHING HAPPENED
thel'vadam said:
Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem nubia_unlock NUBIA_NX629J
...
FAILED (remote: Device already : unlocked!)
finished. total time: 0.004s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 2.130s]
booting...
FAILED (remote: unknown command)
finished. total time: 2.134s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot recovery.img
target reported max download size of 805306368 bytes
sending 'boot' (98304 KB)...
OKAY [ 2.127s]
writing 'boot'...
OKAY [ 0.627s]
finished. total time: 2.757s
C:\Program Files (x86)\Minimal ADB and Fastboot>
NOTHING HAPPENED
Click to expand...
Click to collapse
Okay`````just asked some friend work for nubia, you need to flash the vbmeta.img into vbmeta partition with same software version recovery file, you can try to flash both chinese and global version. I will come back on Monday to see if you solve this
JerryYin said:
Okay`````just asked some friend work for nubia, you need to flash the vbmeta.img into vbmeta partition with same software version recovery file, you can try to flash both chinese and global version. I will come back on Monday to see if you solve this
Click to expand...
Click to collapse
Can please elaborate this a little bit, also be informed that my RM3 is indian variant, it has separate indian variant ROM available from Nubia India 1.96 GB, so In my opinion GLOBAL AND CHINESE ROM s both wont work, my luck rests with the indian ROM. Ill still try whatever you suggest.
Meanwhile try this, extract the official room
Fastboot oem nub_unlock nubia_nx629j
flash parameter parameter.img
Reboot
Fastboot oem nub_unlock nubia_nx629j
Fastboot flash boot boot.img
Then recovery
Then splash
Then modem non-hlos.bin
At last system.Img
Fastboot reboot
Fat 32 pendrive with official zip, rename =UPDATE, flash via otg, try it out, it might work
Psychotic0666 said:
Meanwhile try this, extract the official room
Fastboot oem nub_unlock nubia_nx629j
flash parameter parameter.img
Reboot
Fastboot oem nub_unlock nubia_nx629j
Fastboot flash boot boot.img
Then recovery
Then splash
Then modem non-hlos.bin
At last system.Img
Fastboot reboot
Fat 32 pendrive with official zip, rename =UPDATE, flash via otg, try it out, it might work
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase system
******** Did you mean to fastboot format this ext4 partition?
erasing 'system'...
FAILED (remote: Erase is not allowed in Lock State)
finished. total time: 0.006s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem nubia_unlock NUBIA_NX629J
...
(bootloader) START update nubia fastboot unlock flag!!!
(bootloader) set state to 1 ok!!!
OKAY [ 0.009s]
finished. total time: 0.010s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase system
******** Did you mean to fastboot format this ext4 partition?
erasing 'system'...
OKAY [ 0.166s]
finished. total time: 0.167s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase modem
erasing 'modem'...
OKAY [ 0.011s]
finished. total time: 0.012s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot reboot
rebooting...
finished. total time: 0.002s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem nubia_unlock NUBIA_NX629J
...
(bootloader) START update nubia fastboot unlock flag!!!
(bootloader) set state to 1 ok!!!
OKAY [ 0.008s]
finished. total time: 0.009s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash dsp dspso.bin
target reported max download size of 805306368 bytes
sending 'dsp' (65536 KB)...
OKAY [ 1.748s]
writing 'dsp'...
OKAY [ 0.343s]
finished. total time: 2.093s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash parameter parameter.img
target reported max download size of 805306368 bytes
sending 'parameter' (0 KB)...
OKAY [ 0.009s]
writing 'parameter'...
OKAY [ 0.004s]
finished. total time: 0.015s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot boot.img
target reported max download size of 805306368 bytes
sending 'boot' (98304 KB)...
OKAY [ 3.432s]
writing 'boot'...
OKAY [ 0.406s]
finished. total time: 3.840s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 805306368 bytes
sending 'recovery' (98304 KB)...
OKAY [ 2.139s]
writing 'recovery'...
OKAY [ 0.518s]
finished. total time: 2.658s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash splash splash.img
target reported max download size of 805306368 bytes
sending 'splash' (7419 KB)...
OKAY [ 0.207s]
writing 'splash'...
OKAY [ 0.056s]
finished. total time: 0.265s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash modem NON-HLOS.bin
target reported max download size of 805306368 bytes
sending 'modem' (144180 KB)...
OKAY [ 3.778s]
writing 'modem'...
OKAY [ 1.045s]
finished. total time: 4.826s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magic
erasing 'system'...
OKAY [ 0.027s]
sending sparse 'system' 1/5 (778291 KB)...
OKAY [ 17.596s]
writing 'system' 1/5...
OKAY [ 0.004s]
sending sparse 'system' 2/5 (697207 KB)...
OKAY [ 22.095s]
writing 'system' 2/5...
OKAY [ 0.003s]
sending sparse 'system' 3/5 (752301 KB)...
OKAY [ 24.678s]
writing 'system' 3/5...
OKAY [ 0.003s]
sending sparse 'system' 4/5 (782303 KB)...
OKAY [ 30.918s]
writing 'system' 4/5...
OKAY [ 0.003s]
sending sparse 'system' 5/5 (723054 KB)...
OKAY [ 30.517s]
writing 'system' 5/5...
OKAY [ 0.002s]
finished. total time: 125.859s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot reboot
rebooting...
finished. total time: 0.002s
C:\Program Files (x86)\Minimal ADB and Fastboot>
STILL SAME
Did you flash the files from global rom?
same incident.
thel'vadam said:
Here is the thing, RM3 launched in india week ago, and it had lot of bugs, capacitive button YouTube, finger print find in page chrome, sub standard camera app and loads of other bugs, So i downloaded the Chinese ROM v2.30 and put it in root storage of phone, I did not unlock bootloader or Enable USB debugging, Installed the ROM, the installation went smooth, and the device did not boot, ERROR THE DEVICE IS CORRUPT IT CANNOT BE TRUSTED, AND WILL NOT BOOT, VISIT THE LINK etc. a common error on RM3 Devices, i tried everything on this post https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page2 and this https://www.getdroidtips.com/nubia-emergency-tool-unbrick/ and many other methods as well, the main difference here is the My device is not Bootloader unlocker is NOT rooted is not USB debugging enabled, Only positive is that i can install few things via FASTBOOT, except RECOVERY which is obviously locked. KINDLY HLEP
Click to expand...
Click to collapse
we have the same exact situtation. i tried every method here https://forum.xda-developers.com/red-magic-3/help/device-corrupt-trusted-boot-t3940057 and here https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9 still to no avail. did you try this on your phone?
godric12 said:
we have the same exact situtation. i tried every method here https://forum.xda-developers.com/red-magic-3/help/device-corrupt-trusted-boot-t3940057 and here https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9 still to no avail. did you try this on your phone?
Click to expand...
Click to collapse
i was once able to get a white screen with green highlighted squicircles, it did allow me to acess the boot from OTG option, i tried installing the indian ROM, it installed successfully, then after restart, same FASTBOOT LOOP WITH ERROR, i dont know how i got to that menu, i repeated the exact steps again, im still not able to get PAST BOOT LOOP.
Psychotic0666 said:
Did you flash the files from global rom?
Click to expand...
Click to collapse
YES TRIED ALL GLOBAL CHINESE indian, all variants. All recovery files all respective System.img files.
IM USING ORIGINAL IN BOX USB C cable if thats a thing,
Though i do get this ERROR (( Invalid sparse file format at header magic )) while pushing SYSTEM.img, it still suceeds, in 5/5 parts. after brief waiting.
Switch off the device and turn back on the Try going to recovery manually with vol and power button
My attempt to install a custom rom has failed horribly and I'm left with a wiped phone. Is there a way to reinstall EMUI? Or still somehow get a custom rom?
I flashed lineage-19.0-20220211-UNOFFICIAL-treble_arm64_bvS.img on system, but although there was no error message it didn't seem to do anything.
It's a LLD-L31
hasl3r said:
Is there a way to reinstall EMUI?
Click to expand...
Click to collapse
Maybe, in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
If you want to flash GSI custom ROM , look here or here .
(ANE and LLD are basically identical devices).
Btw, I'm running LOS 19.0 by Andy Yan on ANE-LX1, works like a charm...
-Alf- said:
Maybe, in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
If you want to flash GSI custom ROM , look here or here .
(ANE and LLD are basically identical devices).
Btw, I'm running LOS 19.0 by Andy Yan on ANE-LX1, works like a charm...
Click to expand...
Click to collapse
I don't seem able to get into fastboot anymore, only TWRP 3.2.1-0 boots. The menu "Reboot - Fastboot" leads back to TWRP and running "adb reboot fastboot" from console as well.
hasl3r said:
I don't seem able to get into fastboot anymore, only TWRP 3.2.1-0 boots. The menu "Reboot - Fastboot" leads back to TWRP and running "adb reboot fastboot" from console as well.
Click to expand...
Click to collapse
- Try the following: turn off your phone, press and hold Volume Down and connect phone to PC.
- Can you boot into eRecovery? (turn off, connect to PC and press and hold Power & Vol Up). If so, try to update phone via Wifi and option "Download latest....".
hasl3r said:
The menu "Reboot - Fastboot" leads back to TWRP and running "adb reboot fastboot" from console as well.
Click to expand...
Click to collapse
Do you have TWRP installed instead of Recovery or eRecovery?
hasl3r said:
It's a LLD-L31
Click to expand...
Click to collapse
What is your regional variant? (Cxxx)
-Alf- said:
- Try the following: turn off your phone, press and hold Volume Down and connect phone to PC.
Click to expand...
Click to collapse
That worked, I'm not around a PC at the moment, I'll run the commands as soon as possible
-Alf- said:
- Can you boot into eRecovery? (turn off, connect to PC and press and hold Power & Vol Up). If so, try to update phone via Wifi and option "Download latest....".
Do you have TWRP installed instead of Recovery or eRecovery?
Click to expand...
Click to collapse
That booted into TWRP as well, so I guess?
-Alf- said:
What is your regional variant? (Cxxx)
Click to expand...
Click to collapse
How to I find that out? I tried google but didn't find information.
All else I got are the IMEI and:
Serial number: FPM4C18622002338
Product ID: 71171281
Many thanks already for your help btw
hasl3r said:
How to I find that out?
Click to expand...
Click to collapse
through the mentioned fastboot commands.
-Alf- said:
through the mentioned fastboot commands.
Click to expand...
Click to collapse
>> fastboot oem get-build-number
(bootloader) :LLD-L31 9.1.0.189(C432E10R1P4)
>> fastboot oem get-product-model
(bootloader) LLD-L31
>> fastboot getvar vendorcountry
vendorcountry: hw/eu
>> fastboot oem oeminforead-CUSTOM_VERSION
(bootloader) :LLD-L31-CUST 9.1.0.10(C432)
>> fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :LLD-L31 9.1.0.117(C432E4R1P3)
hasl3r said:
>> fastboot oem get-build-number
(bootloader) :LLD-L31 9.1.0.189(C432E10R1P4)
>> fastboot oem get-product-model
(bootloader) LLD-L31
>> fastboot getvar vendorcountry
vendorcountry: hw/eu
>> fastboot oem oeminforead-CUSTOM_VERSION
(bootloader) :LLD-L31-CUST 9.1.0.10(C432)
>> fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :LLD-L31 9.1.0.117(C432E4R1P3)
Click to expand...
Click to collapse
Okay, try the following:
1. Download Service ROM
Unpack it, there's a dload file in Software folder. Copy dload as it is to the SD Card (without unpacking it!)
2. Download TWRP 3.2.1 https://mega.nz/#!tkcTlATI!A8UJGPBGtxJbLcUOJoxCGJj5PFZXzCnjbb3OkwqKTP8
and copy it to SD Card
3. also copy to SD stock Recovery_ramdisk-9.1.img , download here:
https://mega.nz/#!M0FHlYhb!4yWz8Onr3D1NATel4mZSK4SNdd5B3p6dnPg6oXPGWl8
4. Boot into your TWRP, select storage - SD Card, select "Install image", find TWRP-9.1 file and mark eRecovery, swipe. Go back, find recovery_ramdisk-9.1 file , mark Recovery, swipe.
5.Turn off the phone, use option 'Power Off' in TWRP's menu.
6. Press and hold Power & both Volume buttons .
-Alf- said:
Okay, try the following:
Click to expand...
Click to collapse
Amazing, thank you so much!
-Alf- said:
If you want to flash GSI custom ROM , look here or here .
(ANE and LLD are basically identical devices).
Btw, I'm running LOS 19.0 by Andy Yan on ANE-LX1, works like a charm...
Click to expand...
Click to collapse
Having the phone running again gave me hope, so I'll try to flash LineageOS 17.1 tomorrow.
hasl3r said:
Amazing, thank you so much!
Having the phone running again gave me hope, so I'll try to flash LineageOS 17.1 tomorrow.
Click to expand...
Click to collapse
Glad to help
-Alf- said:
Glad to help
Click to expand...
Click to collapse
Sorry to bother you again, just wondering if you have any advice. I tried flashing LineageOS 17.1, but realised that the bootloader is locked again. My unlock code doesn't seem to work anymore (check password failed) and I figured it's because I have to downgrade EMUI 9.1 to 8.0. Took me a while, but turns out that was not the issue.
Do you happen to have any idea what to try? Do I have to buy another DC Unlocker license?
I don't know if it's related, but "adb reboot fastboot" just reboots the device and I have to use the volume down key to get there.
hasl3r said:
the bootloader is locked again.
Click to expand...
Click to collapse
it's normal after using dload method
hasl3r said:
My unlock code doesn't seem to work anymore
Click to expand...
Click to collapse
Unlock code is permanent. Is OEM unlocking turned on in Developer options? (FRP unlock on fastboot screen?)
-Alf- said:
Unlock code is permanent. Is OEM unlocking turned on in Developer options? (FRP unlock on fastboot screen?)
Click to expand...
Click to collapse
Turns out the problem was copy/pasting the unlock code instead of hand typing it..
So I could flash it, but then the reset failed. Just realised that EMUI 9.1 is a requirement though, so I'll flash that first and try again.
Edit: Nvm fixed it. Sorry if you got a notification anyway.
-Alf- said:
If you want to flash GSI custom ROM , look here or here .
(ANE and LLD are basically identical devices).
Btw, I'm running LOS 19.0 by Andy Yan on ANE-LX1, works like a charm...
Click to expand...
Click to collapse
Hmm I tried it with a clean stock 9.1 but flashing didn't work
If you have no ideas, I'll just stick with the stock installation.
Code:
>> fastboot flash system losq-v224-201017-arm64-bgN.img
target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (460796 KB)...
OKAY [ 12.198s]
writing 'system' 1/6...
FAILED (remote: sparse flash write failure)
finished. total time: 12.678s
Code:
>>fastboot flash system "caos-v315+220228-arm64-bgZ.img"
target reported max download size of 471859200 bytes
Invalid sparse file format at header magi
sending sparse 'system' 1/7 (460796 KB)...
OKAY [ 12.284s]
writing 'system' 1/7...
FAILED (remote: sparse flash write failure)
finished. total time: 12.730s
hasl3r said:
Hmm I tried it with a clean stock 9.1 but flashing didn't work
If you have no ideas, I'll just stick with the stock installation.
Code:
>> fastboot flash system losq-v224-201017-arm64-bgN.img
target reported max download size of 471859200 bytes
sending sparse 'system' 1/6 (460796 KB)...
OKAY [ 12.198s]
writing 'system' 1/6...
FAILED (remote: sparse flash write failure)
finished. total time: 12.678s
Code:
>>fastboot flash system "caos-v315+220228-arm64-bgZ.img"
target reported max download size of 471859200 bytes
Invalid sparse file format at header magi
sending sparse 'system' 1/7 (460796 KB)...
OKAY [ 12.284s]
writing 'system' 1/7...
FAILED (remote: sparse flash write failure)
finished. total time: 12.730s
Click to expand...
Click to collapse
1. be sure that your bootloader is unlocked, try to unlock it again
2. In fastboot mode run command
fastboot erase system
and try to flash GSI again
3. Install TWRP 3.2.1 gaguga edition, in TWRP select Mount - mark System, go back, select Wipe > Advanced > mark System > Repaire or etc. > Resize file system > confirm, reboot .
Then flash back stock recovery and try to install GSI.
4. Downgrade to the lower build number via dload method
5. idk...
I am currently trying to flash TWRP to my old Xperia Z and when I try to flash it, fastboot spew me with an error:
Sending 'recovery' (15198 kB) OKAY [ 0.500s]
Writing 'recovery' FAILED (remote: 'Command not allowed')
fastboot: error: command failed
I unlocked the bootloader already and Treble Check reported that I have A-only
Can someone give me some solution to this?
The only way i got my phone to flash is by flashing it via the Sony Mobile Flasher
Dl: https://www.ytechb.com/sony-mobile-flasher/
once there unpack the RAR file
then get the fastboot and flasher drivers
and the driver for your specific model
then connect your device in fastboot mode
click the flash button (top left corner)
click fastboot mode
click flash kenel
change the explorer to search for .img files
click the TWRP img for you phone
hopefully should work