viper asking for drivers to be installed again and again....even flashed through TWRP but no use.....any suggestions?
Akky_karan said:
viper asking for drivers to be installed again and again....even flashed through TWRP but no use.....any suggestions?
Click to expand...
Click to collapse
I got it working by changing SElinux to permissive.
Miikkelson said:
I got it working by changing SElinux to permissive.
Click to expand...
Click to collapse
How did you do it? The SELinux Mode Changer doesn't seem to be working.
drifftkingg97 said:
How did you do it? The SELinux Mode Changer doesn't seem to be working.
Click to expand...
Click to collapse
I used Magisk SELinux Manager made by Jman420. Here's a link to it https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-manager-t3760042
Miikkelson said:
I used Magisk SELinux Manager made by Jman420. Here's a link to it https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-manager-t3760042
Click to expand...
Click to collapse
Change anything After all reboot drivers are not installed
I reverted to Oreo just because of v4a and gcam not working on Pie. Anyways, not much difference between Oreo and Pie except silly gestures and fingerprint swipe for notifications.
Just install this.
Then start the app, tap Yes when prompted to install/update the drivers and reboot. Voila!
The drivers will be installed in magisk module dir, so no SafetyNet issues at all. You don't even need to set SELinux to permissive.
drifftkingg97 said:
I reverted to Oreo just because of v4a and gcam not working on Pie. Anyways, not much difference between Oreo and Pie except silly gestures and fingerprint swipe for notifications.
Click to expand...
Click to collapse
gcam has been working on Pie beta since day 1, look for the post here in forum of magisk module gcam 6.1. IMO stock Pie is way better than Oreo and any other custom rom for A2/Mi6x. I'm gonna try the apk provided by @Jager012 above
Related
Hello, i have a XT1068 running the xt1064 lollipop rom, it is rooted and have busybox installed but i can't make viper work, does somebody have the same problem or know what i can do?
Lucky Patcher also doesn't work properly
@Hakkinan both are working fine for me even though i am on Lollipop.Check and reinstall the app as per as instructions
lols21.10 said:
@Hakkinan both are working fine for me even though i am on Lollipop.Check and reinstall the app as per as instructions
Click to expand...
Click to collapse
They worked for me on my nexus 4 with lollipop, well, i'm gonna do a clean install and try again, thanks!
lols21.10 said:
@Hakkinan both are working fine for me even though i am on Lollipop.Check and reinstall the app as per as instructions
Click to expand...
Click to collapse
I tried again and still doesn't work
Hakkinan said:
Hello, i have a XT1068 running the xt1064 lollipop rom, it is rooted and have busybox installed but i can't make viper work, does somebody have the same problem or know what i can do?
Click to expand...
Click to collapse
Try this after Rooting, Change to permissive mode with SELinux Mode Changer https://play.google.com/store/apps/details?id=com.mrbimc.selinux from the Play Store.
Enable developer options and Uncheck - Use Nuplayer.
Open Viper4Android and under settings switch FX Compatible mode to Compatible.
and finally don't speak abt LP on xda.
sahil kaul said:
Try this after Rooting, Change to permissive mode with SELinux Mode Changer https://play.google.com/store/apps/details?id=com.mrbimc.selinux from the Play Store.
Enable developer options and Uncheck - Use Nuplayer.
Open Viper4Android and under settings switch FX Compatible mode to Compatible.
Click to expand...
Click to collapse
Didn't work, tried after a clean install, didn't work either.
sahil kaul said:
and finally don't speak abt LP on xda.
Click to expand...
Click to collapse
I know, only mentioned it because i thought maybe it could have some relation to my problem, don't know
Finally got it working, using the SELinux Mode Changer + Busybox On Rails
I'm trying to install the Viper4Android 2.5.0.5 module in Magisk. I installed the module and the app and then rebooted, but the driver status in Viper4Android under enabled indicates a "no".
I've tried some of the settings, but it does not seem to work. The sound is all the same. Any idea how to get this to work? There were no additional instructions for getting V4A to work.
Nexus 6 running Pure Nexus 7.1.2 with Magisk version 12.0
I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Didgeridoohan said:
I've had great success on several different devices with this module: https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Click to expand...
Click to collapse
I can confirm that the above link works great..
I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".
MiuKing said:
I was hoping I didn't have to use that workaround, but I guess I have no choice. I don't know if anyone will agree with me, but I find it annoying to have to decipher and read through all these guides and forum posts to figure out how to get something to work. I wish things just "worked".
Click to expand...
Click to collapse
Everyone has different devices, different setups, etc. It's never going to "just work" easily for everyone. That said, the link above works great and doesn't really have much reading to do....
Only issue I had was it not working initially, but I set the mode to "compatible" instead of "normal" it instantly started working. In case you have issues with it not starting like I did.
Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
- Viper4Android APK here ( http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip )
- BusyBox you can get it on the Play Store
- This Magisk module for OP3T but if you have an other phone search an other compatible module ( https://androidfilehost.com/?fid=673368273298977808 )
- The SELinux Switch [IMPORTANT] ( https://forum.xda-developers.com/devdb/project/?id=22073#downloads )
UNINSTALL ALL PREVIOUS VERSIONS OF V4A ON YOUR DEVICE.
Now I'm gona show you how to get this sh*t working
Simply install unzip the Viper4Android folder and install this apk :
ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk
(Maybe a newer version can be delivered in the future I think you can install it).
Then install BusyBox.
Open V4A and install the Drivers.
When it's done go to Magisk -> Modules -> + and install the zip module for your device.
/!\REBOOT /!\
Finally you just have to install The SELinux Switch.apk and switch your SELinux to Permissive (maybe you have to reboot but for me when I reboot my SELinux go back to Enforcing SELinux so I switch it back when I reboot).
[Note : I don't know if it's important but I was flashing a zip of V4A that's install me V4A as a system app and it wasn't working (error I/O) this is not important but it maybe install me other files so maybe you have to do this if it's not working at the end].
V4A is working now (don't forget to switch off your stock equalizer in Settings -> Sound -> Balance)
If you have any problem or questions contact me.
Franck7519 said:
Hello, I have a OnePlus 3T (Oreo - 8.0.0 - OxygenOS Open 20 ) I was in the big sh*t installing this app but now it's working so what I do ?
I simply install 4/5 things :
Click to expand...
Click to collapse
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Sent from my LG Nexus 5X using XDA Labs
Skittles9823 said:
My dude, you are doing way more then you have to. Just install Ahrions magisk viper module. It has all the patches for OOS Oreo to work (it seems OnePlus made it impossible for viper to work on Enforcing with their Oreo release -.-)
Click to expand...
Click to collapse
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.
Franck7519 said:
No because V4A is not working when SELinux is on enforcing bru this is why I install the switcher and it's working but if a problem comes I will test with your module.
Click to expand...
Click to collapse
The module I suggested automatically sets permissive on boot for OOS devices.
Sent from my LG Nexus 5X using XDA Labs
Skittles9823 said:
The module I suggested automatically sets permissive on boot for OOS devices.
Click to expand...
Click to collapse
It's better than my method yet I'm agree but I don't find your module can you send me a link ?
Franck7519 said:
It's better than my method yet I'm agree but I don't find your module can you send me a link ?
Click to expand...
Click to collapse
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Sent from my LG Nexus 5X using XDA Labs
Skittles9823 said:
Look at the previous link in this thread. That's the one (it requires Magisk 15+ to work).
Click to expand...
Click to collapse
Ok thanks bru
Hi,
Just found a strange bug on OOS5 OB1. When installing ARISE, (core and v4a), OOS is rebooting fine then after few seconds a dialog is opened for factory reset : https://i.imgur.com/KCM2EZI.jpg
Same thing is happening with other audio mods such as XTREMEMusic Mod.
I suspect that it is because Dolby's apps are beeing uninstalled while mods are installing so OOS wants a factory reset to recover it.
Anyone have the same issue? And a working audio mod?
V4a working flawless
cvncbn said:
V4a working flawless
Click to expand...
Click to collapse
can you share the link to download the working viper?
Project Meli working fine here, only the app has some FC.
blackpanther0582 said:
can you share the link to download the working viper?
Click to expand...
Click to collapse
Download it from Magisk
_MartyMan_ said:
Project Meli working fine here, only the app has some FC.
Click to expand...
Click to collapse
I installed Project Meli, V4A seems to have trouble installing drivers... Do you have this bug too?
furious.builder said:
I installed Project Meli, V4A seems to have trouble installing drivers... Do you have this bug too?
Click to expand...
Click to collapse
Uh sorry i forgot to mention i don't use V4A... :/
I solved V4A by setting selinux to permissive, all is good now except some force closes but the sound is really awesome, thanks for having shared the project ahah
Ainur should be fine regardless of android versions, tho bugs may come out
Just use :
1- [MODULE] Magisk SELinux Permissive Script v1.1
2- Install the Viper4Android 2.5.0.5 v2.2 on MagiskManager repo
All is fine, no bug, no force close
Pho3nX said:
Just use :
1- [MODULE] Magisk SELinux Permissive Script v1.1
2- Install the Viper4Android 2.5.0.5 v2.2 on MagiskManager repo
All is fine, no bug, no force close
Click to expand...
Click to collapse
excuse me you can write again. those links which you have written here point to the same page where the script. and I am confused how to install. You can write a procedure in detail. Thank you brother.
so according to this guide really works v4a. Thank you guys!
bassgenerator said:
so according to this guide really works v4a. Thank you guys!
Click to expand...
Click to collapse
Too late for explanations lol, It works
Yes the procedure was just flash both modules on Magisk and Tadaaaaaa :fingers-crossed:
Hi, i was wondering which one is superior and if so why?
I see people installng both , isn't one of them enough? Or am i missing something here.
I currently have atmos installed on nitrogen oreo 8.1 on shamu.
Thanks
I use both on my OP3T and they work quite well together.
Edit: and since the latest update to the Unity V4A Magisk module, also on my Nexus 6.
Sanabil said:
Hi, i was wondering which one is superior and if so why?
I see people installng both , isn't one of them enough? Or am i missing something here.
I currently have atmos installed on nitrogen oreo 8.1 on shamu.
Thanks
Click to expand...
Click to collapse
Mind sharing the link, file or anything related to install please and txx
hbenz2008 said:
Mind sharing the link, file or anything related to install please and txx
Click to expand...
Click to collapse
Well i installed Dolby Atomos via Magisk , using Magisk module . If you are rooted and have Magisk installed you can search for it and install it.
Sanabil said:
Well i installed Dolby Atomos via Magisk , using Magisk module . If you are rooted and have Magisk installed you can search for it and install it.
Click to expand...
Click to collapse
Which 1 u installed?
hbenz2008 said:
Which 1 u installed?
Click to expand...
Click to collapse
Bro i think i did not installed via magisk sorry for the mistake.while magisk also has some modules i think they were not compatible with my configuration.
Here
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
This is where i got it, hope it helps.
Hi, i really need help can someone please tell me how do i install Viper4Android on Emui 8? On emui 5 it was as simple as installing one Magisk module, on oreo it doesnt work
Any help apprecited
Anyone?
aciupapa said:
Anyone?
Click to expand...
Click to collapse
Saw this ...
V4a is not compatible with emui 8 because v4a uses 32 bits audio files and emui 8 only supports 64 bits files
juamply said:
V4a is not compatible with emui 8 because v4a uses 32 bits audio files and emui 8 only supports 64 bits files
Click to expand...
Click to collapse
There is Elemental ROM in Development section of the device, it is a rework of EMUI 8 and has V4A in it, I couldn't install that ROM but I think it is still possible to install it somehow on EMUI 8. I really would like to know how.
you need to set SELinux to permissive, and rename audio_effect file in vendor/etc folder
SykesMod said:
you need to set SELinux to permissive, and rename audio_effect file in vendor/etc folder
Click to expand...
Click to collapse
But how change SELinux on Oreo?
GDStaff said:
But how change SELinux on Oreo?
Click to expand...
Click to collapse
There are apps for that, SELinux switcher for instance, also you can use the magisk module. But even though you do that Viper will not work on EMUI 8.
GDStaff said:
But how change SELinux on Oreo?
Click to expand...
Click to collapse
if u r on magisk
use magisk permissive script 1.2
liboct87 said:
if u r on magisk
use magisk permissive script 1.2
Click to expand...
Click to collapse
Magisk Permissive script 1.2 don't work for oreo, and Magisk magisk selinux permissive script 1.5 don't work too.
GDStaff said:
Magisk Permissive script 1.2 don't work for oreo, and Magisk magisk selinux permissive script 1.5 don't work too.
Click to expand...
Click to collapse
SELinux can't be forced in oreo (damn huawei) , you need to build kernel source with CONFIG_SECURITY_SELINUX_DEVELOP=y , then you can change to permissive.
Has anyone figured out how to install Viper4Android on Oreo? It is really the only thing stopping me from using oreo as a daily driver
Im using huawei mate 9, with emui 8, the only kernel for selinux permissive (but show as enforcing) hyperplus kernel.. Able to install viper driver, but can't open the app... I think a full permissive kernel should work.. But currently no developer build for mate 9, sad
Guys, currently there is no 64-bit driver for Viper, so no EMUI8 users can use Viper, sadly. I've tried contacting the developer on two separate emails but received no response. Does anyone know of any other sound mods that can be a good replacement?
natanrosenfeld said:
Guys, currently there is no 64-bit driver for Viper, so no EMUI8 users can use Viper, sadly. I've tried contacting the developer on two separate emails but received no response. Does anyone know of any other sound mods that can be a good replacement?
Click to expand...
Click to collapse
Ainur Sauron should be a good mod..
natanrosenfeld said:
Guys, currently there is no 64-bit driver for Viper, so no EMUI8 users can use Viper, sadly. I've tried contacting the developer on two separate emails but received no response. Does anyone know of any other sound mods that can be a good replacement?
Click to expand...
Click to collapse
Try to search in Magisk default repository, even on word "audio" there 3-4 mods actually