Hi,
I've recently bought a new car which has Bluetooth but rather stupidly I've just discovered that it can only be used for calls. So what I'd like to do is buy a 2nd Bluetooth receiver and connect it to the cars aux port so that I can stream Spotify to my car. But my question is, could I be connected to both Bluetooth devices at the same time and could I configure one (the cars) for calls and the other (3rd party) for music? If so how would I set this up on the phone?
Many thanks
Yes it could. I'm using it that way
Just disable calls on 1st and disable music on 2nd device
dayloon said:
Hi,
I've recently bought a new car which has Bluetooth but rather stupidly I've just discovered that it can only be used for calls. So what I'd like to do is buy a 2nd Bluetooth receiver and connect it to the cars aux port so that I can stream Spotify to my car. But my question is, could I be connected to both Bluetooth devices at the same time and could I configure one (the cars) for calls and the other (3rd party) for music? If so how would I set this up on the phone?
Many thanks
Click to expand...
Click to collapse
i'd have thought you are just not setting it up right in the car, but i had a Mini loaner that was also somehow only phone use and not music enabled. just weird.
in your bluetooth settings, there's an exclamation mark inside a circle that is used for device-specific settings (as any other phone has as well) that will let you choose phone and/or media for each device.
so your car will be phone only of course, but on your bluetooth receiver, you'd pair it, and you have the option to turn off the phone function for that receiver so that its an audio-only device
Related
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Sounds to me like it's an issue with the stereo, not the Kaiser.
Perhaps try disabling the handsfree service (for that pair) on the Kaiser? I can't remember exactly if you disable certain services.
cotc2001 said:
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Click to expand...
Click to collapse
I have an XCarLink and I have the same behaviour which is a bit annoying. I did a bit of searching a while ago but never got anywhere. If there is an (easy) answer to this I would be interested.
Andy
No it's def not the stereo , i've got it working sort of using A2DP toggle but it's not automatic.
Installed A2DP toggle and linked it to the audio manager on the kaiser.
So I just click the play button on my home screen and it kicks in the wireless stereo and launches the audio manager at the same time and it all works.
It's just annoying as I know that before I moved the stereo from my Honda civic to my hyundai Coupe all I had to do was just start audio manager and the wireless stereo kicked in automatically.
I've seen this too; I have a Sony BT5000 (basically the same as the OP), and I've seen it with both Wizard & Kaiser devices.
A bit more testing - expected behaviour?
I went out in the car earlier and had to do the 'set as wireless stereo' trick to get the BT streaming working with the XCarLink. When I switched off the engine and the head unit powered off the headset icon disappeared from the phone (which is normal) indicating there was no connection. I then left the car but left the bluetooth enabled on the phone instead of switching it off as I normally do. When I returned and drove off the partnership was re-established and the headset icon re-appeared and I was able to stream music etc without doing the 'set as wireless stereo' trick.
I tested this a couple of times and the behaviour was the same - i.e. leave BT enabled on the phone but switch on/off the XCarLink (car kit) and the partnership re-establishes each time with Wireless Stereo working. Switch BT off and then back on on the phone and you have to manually select Wireless Stereo.
Is this the expected behaviour or is there a trick to getting this working seamlessly?
Andy
That didnt' work for me. I even did a hard reset on my phone to see if there was something I had installed causing it not to relink.
If I had any hair, i'd be pulling it out by now
It's so frustrating knowing that I had worked it out once before but when it comes to the crunch you can't remember for the life of you how you did it.
Well i've been searching for an answer and found this here
http://forum.xda-developers.com/showthread.php?p=1318542#post1320648
@ debully>
There is a very simple fix to enable the Pioneer to recognise and connect to your phone. You see the Pioneer is searching for a phone or a Smartphone, the Trinity identifies itself as a PPC and so the Pioneer ignores it.
The Class of Device or CoD must be changed so that the Trinity identifies itself as either a phone or Smartphone.
If you change the Dword Data value in.... HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD"
to 5374476 (decimal) and set bluetooth to discoverable in your Trin, you should find that it connects automatically.
It took me 8 months to find this out.
PS. I don't have the problem with not hearing the callers.
Click to expand...
Click to collapse
But it didn't work for me - on the plus side though I did find a really cool mortscript from the same guy which when I plug the kaiser into my car cradle/charger it recognises the car stereo (but doesn't set to "wireless stereo" and automatically loads up my media player
My search continues
EDIT: Ok found that once the initial partnership for wireless stereo is done, if I turn off the radio and turn it back on again, the partnership is lost as usual until I press channel 6 (pause) on my head unit and then it comes back on.
So, I have a new Toyota Avalon with built-in bluetooth. Was wondering if anyone knew of hacks, tricks, tweaks - software or hardware - to permit a2dp to show up when connected through bluetooth. It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Anyway to do this?
Also, for anyone with a Toyota and bluetooth, is there any way to get Microsoft Voice Command activated from the steering wheel? On all my external car bluetooth speakers, hitting the call button activates Voice Command. Doesn't do it with the built-in Toyota system...unless I am overlooking something.
BUMP....
Is there someone on the forum with a Toyota and bluetooth?
I am bummed about this...the only way I can stream or play audio is use the AUX jack which is fine EXCEPT it means that the phone cannot be used via the built-in blue tooth...the other party can be heard by the car microphones don't pick up my voice (presumably because the AUX connector somehow hijacks it???!!)
Any help would be appreciated.
freddiemac1 said:
It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Click to expand...
Click to collapse
That's what would happen if the car's BT did not support A2DP. My guess would be that your car only supports handsfree.
I'm in the same boat. I have an '07 Sienna and I have been looking for a way to connect AD2P bluetooth. So far, I'm having no luck.
I've thought about mounting my i.tech clip inside the dash to the Aux input. That means I'd have to modify the i.tech to work when power is connected. I would also have figure out a way to use the Aux port directly (with another device) if I wish. It is always something...
The '09 Toyota's support the AD2P.
works for me
so, I am in a '10 toyota. When I get into the car, it will pair up as handsfree, but does not show AD2P initially. For me at least, if I go to the BT tab on the audio screen, and press and hold the play button, it will start playing from the last playlist I was using. The steering wheel seek up seek down work to skip forward and back.
The first time I needed to initiate some music playing on the phone, and then tell the car to connect bluetooth through the BT tab on the audio menu, I think it hides the AD2P unless the phone requests it, and treats it separately from the handsfree connection.
I wish you luck- for short trips, it is great to be able to just sit down in the car, and have the radio play my mp3s without having to muck with my phone or cables.
I have a Nexus One paired with the motorola hd 9 earphones and I want to connect a bluetooth heartrate monitor at the same time while I train...can this be done or can I only use one at a time???
DirtyNickel75 said:
I have a Nexus One paired with the motorola hd 9 earphones and I want to connect a bluetooth heartrate monitor at the same time while I train...can this be done or can I only use one at a time???
Click to expand...
Click to collapse
should be doable, but it depends on the app that accesses the heart-rate monitor as what type of device it's being addressed.
I know, because I use a BackBeat 903 headset for "phone" connection and a Motorola T505 for "Audio" connection, which pipes my music from my N1 into my car stereo via FM. When a call comes in, the Music stops/pauses and the N1 switches the call into my BT headset. After the call is done, the music continues via the T505/car-stereo.
According to bluetooth specs (if i recall right) Bluetooth can handle 7 devices at once/parallel connected
Thanks for the reply...
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I think the answer lies in the question here,, Parrot Bluetooth Media Connection.
The stereo isn't 'smart' enough to determine that what is connecting to it is a Phone/MP3 and as such you wont be able to split the audio to have the phone play music and the Stereo take calls, it'll end up being one over the other.
One way around this would be to test with a completely different Bluetooth Headset to see if this allows music to be played on the Device and Calls to come through on the Headset,, failing that its going to have to be a potential dev jobby to split how the device sends its audio and to what specific device,,, if that lies with HTC and Android/Us or Pioneer/Parrot themselves,, might be worth asking whats the official standpoint on this with the Manufacturer and see if they are getting this same issue from multiple folks
uConnect and Bluetooth Media
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I have the same problem with my HTC One across four different ROMs, two GE and two Sense.
It's NOT an issue with my car stereo (uConnect system) as it works flawlessly on my Nexus 7 and VZW Galaxy Nexus. I prefer to have media (music, Ingress etc...) play over the phone. Only thing I want to play over the uConnect is the actual phone. No matter how many times I unselect media in the bluetooth settings it selects it again.
I see this is an old thread, anyone have any ideas?
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
deadman3000 said:
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
Click to expand...
Click to collapse
I've just installed Bluetooth Auto Connect have to go run some errands in a little while, I'll let you know if it helps out managing profiles or not.
If it works let me know what settings you used as I don't understand all the options lol.
bluetooth problem
Hi developers: Thanks Team Venom for a great ROM. I have only one problem. Rom 2.7 no problem with Bluetooth in the car. 3.1 Installation of clean and dirty disables bluetooth. Ten seconds connected and then disconnected. Again, connects and disconnects. So it all over again. It is in version 3.6 ... any change BT software? You can install the software separately BT? Or any other advice? Thank you very much
edit: I deleted the original settings in the car. Again the connection and still the same problem.
Hello everyone,
I am looking for a solution to connect two phones in the car via Bluetooth at the same time.
I wonder if it depends on AA or on the car itself and its software.
I use AA cable in opel astra 19r. - works great.
A second phone would be enough for me to be able to connect via BT to handle calls. How to do it?
I mean that the connection of two phones should be simultaneous - that is, no matter which phone is ringing, the sound is heard through the loudspeakers in the car.
In the case of wireless headphones, the connection of two phones, a computer works without any problems - and the headphones "catch" on which device there is some action and switch to it.
Maybe someone found a way to do it? Any hints?
Hands free calling is only possible with one phone if you use Android Auto (regardless if wired or wireless).
On some cars there is the possibility to connect a second phone to listen to Bluetooth media (but this depends on the car).
I was also looking for a solution to connect two phones. In the end I gave up...
It's up to the car (or headunit).