I dont know where I can find my model number of my phone but it doesnt boot it is stuck at the huawei logo and I can go into fastboot and TWRP recovery but I need the stock recovery to factory reset my phone anyone can help me?
Correction EVA-L19
You have opened two threads in five minutes, for the same. Answered to the other
Related
Hello guys ,
out of the blue my phone just stuck at boot logo and just keeps restarting .
it either stays at boot screen or nothing at all.
power+vol up(down) isnt working as well
can anyone please help me resolve this
i went to a service center and they said it is a hardware issue and parts for this model are not available any more so they cant do anything this about it.
TIA
regards
umerashraf said:
Hello guys ,
out of the blue my phone just stuck at boot logo and just keeps restarting .
it either stays at boot screen or nothing at all.
power+vol up(down) isnt working as well
can anyone please help me resolve this
i went to a service center and they said it is a hardware issue and parts for this model are not available any more so they cant do anything this about it.
TIA
regards
Click to expand...
Click to collapse
Do adb recognize your phone?!
Fixed it?
flash stock rom.
If your phone is showing you BOOT (huawei/honor logo or image) then this not hardware issue. It can occur if you have flashed a custom recovery while its bootloader is locked or Chinese local update available on carbon tesla. Code [email protected] has given very precise details and solution about it. Solution= Download Sp flash tools. Download drivers. Download signed and unsigned official roms B108 or 115. and start experimenting.
what I have done : I flashed Chinese version Rom and then Same issue occurred sent it to claim my warranty. after sometime I did the same mistake but I started searching for this issue and found a complete huawei honor 3c guide on xda. Do not believe shop owner they can be mistaken or experienced.
Fixed
My huawei honor 3c was stuck on logo. I copied dload file to mmc and through stock recovery flashed it. Phone is now ok.
Hey all, i'm posting to ask you some help !
I wanted to update my P9 to EMUI 5 B360 final and stable version i found in internet, then i create the dload file in sd card and tryed to install it, sadly installation didnt complete it failed at 5%.
After that my phone didnt work so i wanted to reinstall b 186 on it. I first install the intermediate package from the huawei site and then i wanted to install the b186, but installation failed too and now when my p9 is stuck at boot logo when i turn it on. Recovery mode (by puting volum + and power button) does not work, i can only go to fastboot mode.
Edit: my phone is not rooted
Please if someone have a solution to that help me !
Same Problem here!
Firop said:
Hey all, i'm posting to ask you some help !
I wanted to update my P9 to EMUI 5 B360 final and stable version i found in internet, then i create the dload file in sd card and tryed to install it, sadly installation didnt complete it failed at 5%.
After that my phone didnt work so i wanted to reinstall b 186 on it. I first install the intermediate package from the huawei site and then i wanted to install the b186, but installation failed too and now when my p9 is stuck at boot logo when i turn it on. Recovery mode (by puting volum + and power button) does not work, i can only go to fastboot mode.
Edit: my phone is not rooted
Please if someone have a solution to that help me !
Click to expand...
Click to collapse
I also got that issue The official update.app process stopped near 5%, the phone rebootet and now.... I can only see the bootlogo and can boot into Fastboot. Nothing else :/
sooo pleeeaase help if someone has an idea!!!
Same issue here (
Can we flash it via Fastboot maybe?
Hi
I have been searching through different posts and trying different methods of flashing the correct firmware but nothing works.
Here is what happend.
I have a huawei P9 on Vodaphone in the UK
I unlocked the bootloader and rooted but i could not update to android 7 i just kept getting errors and it was a nightmare to get back to anything below that,
I finally did get back to 6 and all worked fine but it was eva-l09c900 that displayed on my phone and still not updated but i was just happy it was working again so i left it.
I decided a few days ago that i need to update but the same thing happened i got an error and now i am stuck in a boot loop.
I first tried the dload method from a sd card but all firmware i tried failed at 4 or 5%
I then tried to fastboot flash boot.img recovery,img and system.img but still in boot loop
After attempting that i no longer have touch capability
I installed twrp recovery but cant do a thing because touch no longer works
Today i have been trying the huawei update tool method through hisuite
That works right upto about 80% then hisuite crashes just as my phone gives an error.
I am now out of idea's
Please any help would be greatly appreciated
Even knowing what firmware i should be on a huawei P9 from the uk on vodaphone might help because im sure its not c900 but that what i had before i tried to update.
I have tried so many different versions now i dont know anymore .
Thank you
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
xtcislove said:
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Click to expand...
Click to collapse
Hi
Thanks but i cannot flash that firmware it just fails at 5% so i used dc pheonix to flash it
it said flashed successfully but still wont boot it just boots to (your device has been unlocked and cant be trusted) then reboots again
is there anything else i can try from here
jy0un9 said:
Hi
Thanks but i cannot flash that firmware it just fails at 5% so i used dc pheonix to flash it
it said flashed successfully but still wont boot it just boots to (your device has been unlocked and cant be trusted) then reboots again
is there anything else i can try from here
Click to expand...
Click to collapse
Just the same as mine,my phone version is EVA-TL00(chinese cmcc version),and my current number is EVA-TL00C01B182SP01. Now I can't dload any firmware(press volume up+volume down+powerbutton or dail *#*#2846579#*#*),but when I enter ecovery mode,it can check the new version EVA-TL001B198,when connect the wifi downloading ,it update 4%,finally failed.Now I cannot find what it encounter?It is always in the TL00C01B182SP01 version.Can anybody help me solving this problem,thx.
I finally did it i just kept flashing different firmware in dc pheonix until one worked
Thanks though
Hi, I made factory reset in TWRP and then problems started. After Huawei logo, screen got dark and only three buttons on the bottom were visible and active. I decided to install stock rom(using fastboot and extracting system boot and recovery), but whenever I do it, phone restarts and go to erecovery. Factory reset in stock recovery always stuck on 99%.
I have got unlocked bootloader, but I dont even know if I install proper version of ROM. Prevoiusly it was PRA-LX1....B161, so I searched for exact rom, but can't install rom properly.
Help me please
Use the Unbrick section incthe How to root thread
I bought a rooted Huawei P10, and when I tried to restore it to stock firmware, I accidentally soft-bricked it.
I can still turn it on, but it is stuck in a boot loop. I can also put it into fastboot/rescue mode and Huawei eRecovery.
I have tried flashing stock firmware through the micro sd card, but with no succes.
The installation always stops at 5%.
I have tried many different guides, and some have suggested I have the wrong firmware.
I have little to no experience in this field, and therefore I need every single bit of help I can get.
​
INFO:
Model: Huawei P10 VTR-L29
Use firmwarefinder for pc and push an update.
Follow the tutorial that the program will say...and dont forget to push the corect version, try the one that you allready have