When I use the volume buttons on my Bluetooth headphones they change the internal volume of the headphones themselves, but they don't change the device volume. They do do that on other phones.
Am I the only one having this issue or is this a bug on all Mi A2 devices?
Haven't really taught about that one but yeah I think you're right. On stock my headphones and systems media volume are separated but on custom roms my headphones media buttons controls systems media volume. However theres a toggle in developer settings to keep systems and headphones volumes separated and I prefer it that way. On stock rom that toggle doesn't seem to have any kind of impact but I don't really care since I prefer separated volume levels.
There's no scientific evidence behind this, but I think that I get the best sound out of my headphones when I keep system volume at about 80-90% and adjust volume levels from headphones to be suitable for the environment.
Related
I have a google car dock for my nexus one and I hook the audio through the car stereo with a 3.5mm audio cable. When it is plugged into the dock the sound is very low and the quality is terrible. If I just pull it out of the dock everything is back to normal -- this happens with all apps.
What do I have to do in order to prevent the phone from doing this while docked?
you have the exact same setup as i do and ive seen this as well, i think there is something that makes the audio play at a different volume specifically for when it is docked for some reason. im on cm6.1.1 and it seems a little better because i believe they tweaked something with it, i saw a checkin on cmsrc on twitter that modified some line with dock volume.
what ive found is if i set the media volume to about 5/8 or 7/8 then dock it the volume will make its "dock adjustment" and its up to where my car volume is from there, usually a little less distortion if the phones volume is a little lower than max. from there if i forget to set the media volume i will use the preamp slider in the poweramp music players equalizer to adjust.
i just wish the volume wouldnt change at all and the volume button on the side of the dock would change the media volume :\
side note: have you noticed that the voice search when docked doesnt pick up your voice very well? almost like the noise canceling mic is cancelling you out or something and other times it can pick up your voice great?
Actually the sound volume was solved by some user that re-compiled libaudio with the code that lowers the sound by 10db commented out. The problem I have is that the sound quality is so poor that it seems to be mono without bass.
It turns out that the crappy audio quality comes from Bluetooth being on. When I disable Bluetooth in car mode, everything is great. Unfortunately I can't figure how to make it disabled by default so I have to disable it everytime.
Sent from my Nexus One using XDA App
This isn't a bug, more of a ICS/JB feature that is somewhat annoying.
I have sensitive ears, so whenever I listen to music on my phone, I keep the volume at one unit above muted. If that sounds confusing, think of it as muting the phone, then pressing the volume up button exactly once.
I noticed that at this setting, the volume is considerably louder than in CM7 at the same setting. I understand many people actually appreciate this, but in my case, it's loud enough that I end up having difficulty hearing external noises, i.e. someone calling my name from across the room, or the doorbell ringing.
Is there any sort of app or setting that I could use to fine-tune the volume even more? I would like something that is analogous to the in-line headphone volume control I use on my PC. On my PC, I use the Windows settings to put the volume at 20%, then I use the rotary slider on my headphone wire to fine-tune, adjusting up or down depending on whether I'm on skype, playing a game, watching a movie, etc, without changing the Windows volume from 20%. If there's some way to do this on Android, that'd be great.
You ought to be able to do that, using DSP manager or a media player with an equalizer, such as PowerAmp.
...
Yeah dsp manager is your best option. Easy to use as well
Sent from my GT-I9300 using xda app-developers app
Forgot to check back on this thread. Thanks guys, DSP Manager's equalizer worked.
Dear all,
I run the stock firmware and like to listen to light music at low volume using a headset. However, the lowest volume is quite high.
Is there some way to decrease it even further without muting it?
Best,
Hindman
As a workaround when using VLC, one can use the built-in equilizer of VLC to decrease the volume.
Unfortunately, the system's equilizer does not provide such good result.
The volume on the output is actually lower than on the Xperia S I replaced with the Z3C. You might not have adjusted the correct volume setting - check Under Settings -> Sound -> Volumes -> Music, video, games & other media.
Toggling the rocker buttons on the sides actually changes the main volume control. Changing the specific media volume setting should resolve the issue for you unless you are using an external amplifier with very high gain.
Dreamslacker said:
The volume on the output is actually lower than on the Xperia S I replaced with the Z3C. You might not have adjusted the correct volume setting - check Under Settings -> Sound -> Volumes -> Music, video, games & other media.
Toggling the rocker buttons on the sides actually changes the main volume control. Changing the specific media volume setting should resolve the issue for you unless you are using an external amplifier with very high gain.
Click to expand...
Click to collapse
I should clarify, that I'm using the noise cancelling headset.
Unfortunately, using the volume slider you mentioned does not allow to decrease the volume further.
Hi,
When pairing up with a Loewe Speaker2Go Bluetooth speaker using aptX my Sony Z3 compact defaults to max volume and the volume control is not configurable from the phone (I am aware this is a KitKat "feature"). The main problem is that this only allows a small scale on the speaker between no sound and very loud sound (3-4 volume presses). Has anyone experienced this kind of problem with other speakers and is there a solution? Thanks,
rimutituki said:
Hi,
When pairing up with a Loewe Speaker2Go Bluetooth speaker using aptX my Sony Z3 compact defaults to max volume and the volume control is not configurable from the phone (I am aware this is a KitKat "feature"). The main problem is that this only allows a small scale on the speaker between no sound and very loud sound (3-4 volume presses). Has anyone experienced this kind of problem with other speakers and is there a solution? Thanks,
Click to expand...
Click to collapse
I paired a Bluetooth Stereo Headset, LG HBS-800, has aptX. When they are connected, I can press the volume rocker on the Z3C and it'll pop up a Bluetooth Volume. My headset has its volume control and works independently.
Yeah, same on my Sony Bluetooth Headphones. Volume control via volume rockers both on phone and headphones (independantly).
My SuperTooth Disco 4 Wireless Portable Bluetooth and NFC Speaker when connected, I get a Bluetooth Volume slider. Apparently it uses the aptX protocol too.
No issue here with the Definitive Technology Cube. NFC, Throw, AptX, and Bluetooth all works together in harmony.
It's a bit of a shame for the OP as that item is pretty expensive that it does that, when much cheaper speakers don't. Odd.
It is a shame as the speaker is very good and worked perfectly with earlier versions of android. Based on the compatibility list it has not been tested with 4.4+ though... Based on the previous replies I guess it is not a sony problem as other Bluetooth aptx devices can still be controlled from the phone. For the devices this works with is the volume in sync on the phone and speaker?
My speaker is controlled entirely by the phone, it has no volume controls itself.
Ok, this seems to be an issue with the Loewe speaker and not the Z3C. I've just been to an hi fi store and tried pairing the phone with a number of Bluetooth aptX speakers, including AudioPro T9, AudioPro T10, Marshall Stanmore and the Sony SRS-X9 and with all these devices I could control the volume from the phone as well. Will check one more thing on the Loewe when I get back home - it had phone and media pairing on (not just media like the other speakers) so maybe this is the problem. If not, looks like the firmware on the Loewe does not support Android 4.4+.
I am having a similar issue but it presents itself when going above the 4th notch on the Bluetooth volume on my XZ3C. Volume goes from 0% to %15 to 30% to 80% to 60% and 70%. When my computer connects to the same bluetooth audio dongle it has a smooth range. I suspect it is a problem with the XZ3C protocols that interfere with certain bluetooth devices and not a hardware problem.
I have the same issue with my JBL speaker. I can't change the volume on the speaker without the Bluetooth volume on the phone rising or reducing. It seems that there isn't any independent control using my z3 compact but if I pair it with my LG g2, it works independently.
Same here with the Jensen Scandinavia Buddy. My Z3C cannot control the volume but my Galaxy S2 running Cyanogenmod at 4.4.4 can.
Still an issue after upgrading to Lollipop.
the good, the bad and the funny
Xperia Z3 Compact, Android 5.0.2
I connect my phone to a Philips BTB 7150 home audio system.
- the phone does not change the volume of the audio system upon connect (good)
- i cannot control the volume of the audio system through the phone's volume rocker (bad)
- when i change the volume directly on my audio system whilst connected with my phone, the phone shows the Bluetooth Volume popup and the slider moves in sync (funny)
So there seems to be some kind of control connection, but only one way.
On the other hand: no problems with iOS devices here. When connected to an iPhone the phone controls the system's volume and system volume changes are reflected on the phone's volume setting.
wenigtelefonierer said:
Xperia Z3 Compact, Android 5.0.2
I connect my phone to a Philips BTB 7150 home audio system.
- the phone does not change the volume of the audio system upon connect (good)
- i cannot control the volume of the audio system through the phone's volume rocker (bad)
- when i change the volume directly on my audio system whilst connected with my phone, the phone shows the Bluetooth Volume popup and the slider moves in sync (funny)
So there seems to be some kind of control connection, but only one way.
On the other hand: no problems with iOS devices here. When connected to an iPhone the phone controls the system's volume and system volume changes are reflected on the phone's volume setting.
Click to expand...
Click to collapse
Xperia Z3 Compact D5803, Android 5.0.2 (Nordic stock ROM, no hacks)
Home hi-fi system with Philips BT adaptor: phone can control the BT audio volume output (as expected)
Home mini hi-fi system: phone can control the BT audio volume output (as expected)
Car BT audio system: phone can control the BT audio volume output (as expected)
JBL Charge BT speaker: phone cannot control the BT audio volume output (oops) ; I need to use the speaker's volume control
So, quite a few gadgets work well, but in fact my JBL speaker suffers from the same problem, which I never realised before.
Is it a speaker BT standards problem ?
Or is there something in the phone's BT implementation that needs refining ?
Same Problem here
I have the following problem:
I use the Z3 compact with a Sony BM-10 BT audio receiver. When a make a call with my BT headset which is not set to maximum volume the volume of the music is set to maximum from time to time afterwards. Also the volume slider shows the BT symbol or loudspeaker or the throw symbol randomly. I tried many things to solve this as pairing the BT devices again. Anyone any idea?
Hi, I have a problem:
- As you know some, since Android 4.4, you can control the system volume with the volume buttons of bluetooth headphones (if they have), whereas in previous versions the system volume and bluetooth were separate.
The problem is this; When increase/decrease the volume with buttons of the headphones, it is very uneven, that is, or is too low or too high.
So I wonder if there is a module (xposed), application or configuration to separate the volumes? (the system can increase/decrease only the volume buttons smarthpone and bluetooth only with integrated buttons)
My Smartphone is Samsung S3 L710 with Rom Bliss Stalk 4.4.4.
I could also use this for my Nexus5. Navigon has a problem with being too quiet with a Bluetooth car device. They say that they use system value instead of Bluetooth value.