[attention - hard brick info] New xloader downgrade not possible - Huawei P10 Plus Guides, News, & Discussion

Hi there,
with VKY-C432_B380 Huawei changed the xloader from 00 to 02.
i didnt checked other brands at the moment.
If you try to downgrade B380 with nocheck recovery or something else you will get a hard brick.
Its the same problem like mate 10 forum.
Check here:
https://forum.xda-developers.com/mate-10/how-to/beware-bla-l29c432b147-t3817241
and here:
https://forum.xda-developers.com/mate-10/how-to/discussion-hard-brick-infos-t3789044

Now in the C432B379 version, twrp is installed. What should I do to install the B380 seamlessly.

You can flash B380 with nocheck recovery but then you can't downgrade back to B379.
With B380 you can't use a Custom kernel by the way. callings are not working.

Blackball said:
You can flash B380 with nocheck recovery but then you can't downgrade back to B379.
With B380 you can't use a Custom kernel by the way. callings are not working.
Click to expand...
Click to collapse
Thank you for your answer. I've unlocked the bootloader lock again. After zeroing erecovery threw the menu. B379 version erecovery again downloaded with the installation. My device is switched on. I'll wait for the B380 with Ota. Huawei is doing this on purpose. Could she be disturbed by something? No more bootloader code.

Related

Honor 7 Lite root

Hi,
I've been looking for instructions and stuff for rooting my phone Honor 7 Lite (NEM-L21) but I haven't found anything. The only valuable information I discovered was that Honor 7 Lite is probably a renamed Honor 5C for an european market. Some websites said it was renamed because there were changes in hardware (for example Honor 7 Lite supposedly doesn't have a fingerprint scanner, they say - but it's not true, from my experience I can say my phone does have it). So these websites can't be trusted anyway I guess. These two models look alike but I was thinking there could be differences anyway. I don't want to brick my phone. Has anybody tried to root this phone? Can anybody provide me any information about rooting it?
I'm sorry for my poor English and thank you very much for any answer.
Hi,
I have Honor 7 Lite NEM-L21 rooted by using method for Honor 5C. But before rooting, You must have an unlocked bootloader. Steps are:
1. unlock bootloader, after unlocking bootloader, phone will be wiped, so backup your data first - http://www.modaco.com/forums/topic/...our-honor-5c-official-and-unofficial-methods/
2. install custom twrp recovery for Honor 5c (known also as Huawei Nemo and Honor 7 Lite) - https://twrp.me/devices/huaweihonor5c.html
3. after installing twrp i recommend doing backup of boot, cust, oeminfo and system partitions to SD card
4. and now is possible install SuperSU zip from twrp recovery. Some instructions on the net recommends using the SuperSU-2.65 - https://download.chainfire.eu/921/SuperSU
Big Red Warning: for now, there are no firmware released for NEM-L21 in UPDATE.APP form for reflashing the phone from the Huawei eRecovery in case of if you bricked the phone. So, please do things carefully. I strongly recommends to do point 3 ASAP after installing twrp.
circulus said:
Hi,
I have Honor 7 Lite NEM-L21 rooted by using method for Honor 5C. But before rooting, You must have an unlocked bootloader. Steps are:
1. unlock bootloader, after unlocking bootloader, phone will be wiped, so backup your data first - http://www.modaco.com/forums/topic/...our-honor-5c-official-and-unofficial-methods/
2. install custom twrp recovery for Honor 5c (known also as Huawei Nemo and Honor 7 Lite) - https://twrp.me/devices/huaweihonor5c.html
3. after installing twrp i recommend doing backup of boot, cust, oeminfo and system partitions to SD card
4. and now is possible install SuperSU zip from twrp recovery. Some instructions on the net recommends using the SuperSU-2.65 - https://download.chainfire.eu/921/SuperSU
Big Red Warning: for now, there are no firmware released for NEM-L21 in UPDATE.APP form for reflashing the phone from the Huawei eRecovery in case of if you bricked the phone. So, please do things carefully. I strongly recommends to do point 3 ASAP after installing twrp.
Click to expand...
Click to collapse
+1. This is the only safest way OP.
Sent from my honor 5X using XDA Labs
Instructions for rooting Honor 7 Lite/5C NEM-L21 b100 are relatively easy to find and follow: unlock with Huawei's code, flash TWRP and SuperSu...
But for me, rooting before updating firmware was a big mistake! Wish I didn't unlock&root this phone yet; should have just updated with FF.
After rooting i wanted to FF update b100 -> b351 Nougat7/EMUI5... But it required stock recovery, which I had already flashed to TWRP, damn!
Now, another option would have been to flash custom ROM, but I didn't find great ROMs around, just somewhat commercial LineageOS (lacks e.g. dual-sim support)
Anyway, I tried to flash b100 -> b351 with TWRP, failed and ended up with test-keys firmware. Then tried to download FF, but the only input method in test-keys seemed to be google voice instead of keyboard = no success.
Then couldn't find stock recovery.img anywhere, so extracted it from stock update.app with extractor. Luckily the extractor had linux version too.
Then flashed stock recovery, updated with update.app method from test-keys to b132, then FF update to b351.
Doesn't seem possible to root b351 yet; now waiting for Nougat7/EMUI5-compatible version of TWRP.
Last time i modified some Android phone 5 years ago, so count me as n00b sharing this bad experience. Hopefully somebody could learn something
Hello everyone.
I tried rooting with the method mentioned by circulus. Running into a wall, can't get TWRP to start, only thing I get is the default EMUI recovery. Honor 7 lite, Android 6.0, EMUI 4.1.2 and bootloader is obviously unlocked.
Any ideas?
tehrek said:
Hello everyone.
I tried rooting with the method mentioned by circulus. Running into a wall, can't get TWRP to start, only thing I get is the default EMUI recovery. Honor 7 lite, Android 6.0, EMUI 4.1.2 and bootloader is obviously unlocked.
Any ideas?
Click to expand...
Click to collapse
Why you can't open TWRP, what your phone shows, if you tryin' to enter TWRP?
tehrek said:
Hello everyone.
I tried rooting with the method mentioned by circulus. Running into a wall, can't get TWRP to start, only thing I get is the default EMUI recovery. Honor 7 lite, Android 6.0, EMUI 4.1.2 and bootloader is obviously unlocked.
Any ideas?
Click to expand...
Click to collapse
Try to flash 3.0.2.0 Nemo TWRP, let me know if there are any problems left.
Got a Honor 7 lite, and i used special twrp and superSu from this post to root it :
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356 ---> for EMUI 5.X / Android Nougat
Work so fine.
Enjoy
Plz use a forum for honor 7 or 7 lite in xda . U will.get more support there than here
gopinaidu77 said:
Plz use a forum for honor 7 or 7 lite in xda . U will.get more support there than here
Click to expand...
Click to collapse
this is honor 7 lite xda forum... 5c=honor 7 lite....
thelous said:
this is honor 7 lite xda forum... 5c=honor 7 lite....
Click to expand...
Click to collapse
Hahahaha , never knew this . Thanks for making me aware of ..
Hi. I got a Honor 7 Lite NEM-L21 with Emui 5.0 and bootloader is unlocked. I have tried to flash TWRP with a pc with the command: fastboot flash recovery <filename>.img. The img file is in the platform-tools folder and cmd.exe says that it succeed. But when I try to reboot to recovery its just stuck in the screen your device is unlocked and cant be trusted your device is booting now and then nothing really happens. Any solution? Firmware: Nougat 7.0 B351
EeliX7 said:
Hi. I got a Honor 7 Lite NEM-L21 with Emui 5.0 and bootloader is unlocked. I have tried to flash TWRP with a pc with the command: fastboot flash recovery <filename>.img. The img file is in the platform-tools folder and cmd.exe says that it succeed. But when I try to reboot to recovery its just stuck in the screen your device is unlocked and cant be trusted your device is booting now and then nothing really happens. Any solution? Firmware: Nougat 7.0 B351
Click to expand...
Click to collapse
Holding power button and letting it reboot takes u to homescreen?
gopinaidu77 said:
Holding power button and letting it reboot takes u to homescreen?
Click to expand...
Click to collapse
No... Its stuck in the warning screen... I can still boot the system by holding power but if I attempt to reboot to recovery, its stuck in that warning. I can't access my PC just yet so it would be nice to be able to reboot to recovery without a PC.
EeliX7 said:
No... Its stuck in the warning screen... I can still boot the system by holding power but if I attempt to reboot to recovery, its stuck in that warning. I can't access my PC just yet so it would be nice to be able to reboot to recovery without a PC.
Click to expand...
Click to collapse
power off your device and make sure you don't have connections to phone ,then hold thevolume up and power after vibrate release power ,it will reboot to recovery
if it stucks flash the recovery again via fastboot
venugopalu007 said:
power off your device and make sure you don't have connections to phone ,then hold thevolume up and power after vibrate release power ,it will reboot to recovery
if it stucks flash the recovery again via fastboot
Click to expand...
Click to collapse
Flashed a P9 Lite version of TWRP, works great!
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356/page20
venugopalu007 said:
power off your device and make sure you don't have connections to phone ,then hold thevolume up and power after vibrate release power ,it will reboot to recovery
if it stucks flash the recovery again via fastboot
Click to expand...
Click to collapse
Do u know his Android version?
gopinaidu77 said:
Do u know his Android version?
Click to expand...
Click to collapse
emui 5.0 ,he said in his first post
venugopalu007 said:
emui 5.0 ,he said in his first post
Click to expand...
Click to collapse
Ok
Hi fellas.
Been busy but got an update, phone is successfully rooted now. Brainfarted a bit earlier and wasn't booting to TWRP.
Me no brain sometiems.

How to restore stock rom on p9 eva L09

Hello
I have huawei p9 L09 rooted, bootloader unlock i have twrp recovery and I'm on cyanogenmod rom. But i dont like the interface, i won't to restore emui rom stock. How can i do?
Thank you
Go to TWRP & Do Factory Reset (Do not Delete Your System) than Shut Down Your Phone & Flash Your Stock System via dload
Thanks for your answer but this method don't work. Whene I shut down and tried to flash stock rom with dload ( press power button + volume down + volume high ) phone start on the twrp recovery. .!!?
Do you have the USB cable unplugged from the computer when using dload?
No cable connected. But on my sd I have other files with dload file ..that can change something?
Adn46 said:
Hello
I have huawei p9 L09 rooted, bootloader unlock i have twrp recovery and I'm on cyanogenmod rom. But i dont like the interface, i won't to restore emui rom stock. How can i do?
Thank you
Click to expand...
Click to collapse
It's too late now but at the time when you had your stock ROM and you installed TWRP, you should have made backup of all partitions in TWRP - now, you will just restore stock partitions and voilla.
From FirmwareFinder download b386 build but it MUST BE FullOTA-MF-PV (not the incomplete MF one), and install by DLOD, 3-button boot method. It will hard-reset firmware (but also recovery) to the stock b386
---------- Post added at 11:36 AM ---------- Previous post was at 11:31 AM ----------
Adn46 said:
Thanks for your answer but this method don't work. Whene I shut down and tried to flash stock rom with dload ( press power button + volume down + volume high ) phone start on the twrp recovery. .!!?
Click to expand...
Click to collapse
Make sure you press both Volume keys together, and not after you press Power key.
Nevertheless, you can flash stock recovery img (adb/fastboot, same way as flashing TWRP), and you will get rid of TWRP
zgfg said:
It's too late now but at the time when you had your stock ROM and you installed TWRP, you should have made backup of all partitions in TWRP - now, you will just restore stock partitions and voilla.
From FirmwareFinder download b386 build but it MUST BE FullOTA-MF-PV (not the incomplete MF one), and install by DLOD, 3-button boot method. It will hard-reset firmware (but also recovery) to the stock b386
---------- Post added at 11:36 AM ---------- Previous post was at 11:31 AM ----------
Make sure you press both Volume keys together, and not after you press Power key.
Nevertheless, you can flash stock recovery img (adb/fastboot, same way as flashing TWRP), and you will get rid of TWRP
Click to expand...
Click to collapse
Hello, Sir i need some help. I have a P9 (LG UPlus South Korea) branded. i want to install emui 5.0 and move to nougat, but i need some steps and guidance to do this. Can you please help me debrand it and install the new software? is there an international rom that can be installed. plus i dont know if my phone is rooted, or not. it can make gsm calls and messages, and use google play services too. my friend gave it to me.
newxdaguy1 said:
Hello, Sir i need some help. I have a P9 (LG UPlus South Korea) branded. i want to install emui 5.0 and move to nougat, but i need some steps and guidance to do this. Can you please help me debrand it and install the new software? is there an international rom that can be installed. plus i dont know if my phone is rooted, or not. it can make gsm calls and messages, and use google play services too. my friend gave it to me.
Click to expand...
Click to collapse
For the beginning (to obtain bootloader code, to debrand to c432) follow the guide:
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
However, once you successfully debrand and install c432 b182 (still Marshmallow) do not cotinue by manually installing b361 (the guide is old), rom b182 you will auomatically receive by OTA first b383 ((Nougat) and then b386
zgfg said:
For the beginning (to obtain bootloader code, to debrand to c432) follow the guide:
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
However, once you successfully debrand and install c432 b182 (still Marshmallow) do not cotinue by manually installing b361 (the guide is old), rom b182 you will auomatically receive by OTA first b383 ((Nougat) and then b386
Click to expand...
Click to collapse
thank you sir, i just want to confirm that that is for Vodafone or Uk branded phones? or will work on any phone? thanks.
newxdaguy1 said:
thank you sir, i just want to confirm that that is for Vodafone or Uk branded phones? or will work on any phone? thanks.
Click to expand...
Click to collapse
It should generally work for any Huawei P9, EVA L09 model no matter which cust (cXXX) you have
zgfg said:
It should generally work for any Huawei P9, EVA L09 model no matter which cust (cXXX) you have
Click to expand...
Click to collapse
Thank you sir, i would be grateful if you please revisit this post if i encounter a problem, i will post it here.
Thank you
zgfg said:
It's too late now but at the time when you had your stock ROM and you installed TWRP, you should have made backup of all partitions in TWRP - now, you will just restore stock partitions and voilla.
From FirmwareFinder download b386 build but it MUST BE FullOTA-MF-PV (not the incomplete MF one), and install by DLOD, 3-button boot method. It will hard-reset firmware (but also recovery) to the stock b386
---------- Post added at 11:36 AM ---------- Previous post was at 11:31 AM ----------
Make sure you press both Volume keys together, and not after you press Power key.
Nevertheless, you can flash stock recovery img (adb/fastboot, same way as flashing TWRP), and you will get rid of TWRP
Click to expand...
Click to collapse
Thank you for your help, I downloaded EVA-L09C635B386 FULLOTA-MF ,But it composed by 3 zip files ( "update.zip" "public/update_data_full_public.zip" "Eva-L09_hp_jp/update_full_EVA-L09_hp_jp.zip" ) !.
How to flash all these files by dload?
Thank you
zgfg said:
It's too late now but at the time when you had your stock ROM and you installed TWRP, you should have made backup of all partitions in TWRP - now, you will just restore stock partitions and voilla.
From FirmwareFinder download b386 build but it MUST BE FullOTA-MF-PV (not the incomplete MF one), and install by DLOD, 3-button boot method. It will hard-reset firmware (but also recovery) to the stock b386
---------- Post added at 11:36 AM ---------- Previous post was at 11:31 AM ----------
Make sure you press both Volume keys together, and not after you press Power key.
Nevertheless, you can flash stock recovery img (adb/fastboot, same way as flashing TWRP), and you will get rid of TWRP
Click to expand...
Click to collapse
Sorry about my hurry. .... i find the b286 build fullOTA-MF-PV ( EVA-L09C432B386 FULLOTA-MF-PV )
I will let you know about the new
zgfg said:
It's too late now but at the time when you had your stock ROM and you installed TWRP, you should have made backup of all partitions in TWRP - now, you will just restore stock partitions and voilla.
From FirmwareFinder download b386 build but it MUST BE FullOTA-MF-PV (not the incomplete MF one), and install by DLOD, 3-button boot method. It will hard-reset firmware (but also recovery) to the stock b386
---------- Post added at 11:36 AM ---------- Previous post was at 11:31 AM ----------
Make sure you press both Volume keys together, and not after you press Power key.
Nevertheless, you can flash stock recovery img (adb/fastboot, same way as flashing TWRP), and you will get rid of TWRP
Click to expand...
Click to collapse
Hello
Now i have the 2 zip files update.zip and eva_full.zip, my question is the same....how to flash these files ? Can i use twrp? If you have tutorial explain how to flash the new build? ?
Thank you
Adn46 said:
Hello
Now i have the 2 zip files update.zip and eva_full.zip, my question is the same....how to flash these files ? Can i use twrp? If you have tutorial explain how to flash the new build?
Click to expand...
Click to collapse
Are you already coming from EVA L09 c432, with Nougat? If so, follow instructions
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magic-rainbow-t3601064
section (4) How to flash Firmware (b386), points 1-17
If you were on EVA l09, c432 but Marshmsllow, you should probably install b182 same way (then you will obtain OTA upgrades to Nougat).
If you are not on c432, you must debrand to c432... or you have to install your corresponding MM or N cXXX firmware.
Now
zgfg said:
Are you already coming from EVA L09 c432, with Nougat? If so, fobllow instructions
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magic-rainbow-t3601064
section (4) How to flash Firmware (b386), points 1-17
If you were on EVA l09, c432 but Marshmsllow, you should probably install b182 same way (then you will obtain OTA upgrades to Nougat).
If you are not on c432, you must debrand to c432... or you have to install your corresponding MM or N cXXX firmware.
Click to expand...
Click to collapse
Now I'm on cynagenmod based on android 7. But before root i had stock EMUI 4.1.1 , build EVA-L09C652B118...
How to debrand to c432?
Sorry to resume...I'm in this situation with bootloader unlocked and TWRP installed.
How can I remove the TWRP and install the B368 proposed?
Tribal123 said:
Sorry to resume...I'm in this situation with bootloader unlocked and TWRP installed.
How can I remove the TWRP and install the B368 proposed?
Click to expand...
Click to collapse
Use HWOTA method
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Working for Nougat (not for Marshmallow, Oreo)
zgfg said:
Use HWOTA method
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Working for Nougat (not for Marshmallow, Oreo)
Click to expand...
Click to collapse
I'm trying to… can you help me on this?
https://forum.xda-developers.com/showpost.php?p=78600810&postcount=664

How many people bricked their phone while Rebranding/OTA and what solutions used ?

How many people bricked specifically hardbricked their phone after 2018-04-16 updates,while OTA or rebranding using any tool and choose which methods you tried to solve.
we need to show how many people we are,and seek for solution or encourage BOX groups to do something for this matter.
Even huawei may help us if they see we are bunch of people.
Edit: Just comment only if you solved the issue with this tool or any other tool that is not mentioned,here we are seeking help.
reza6d said:
How many people bricked specifically hardbricked their phone after 2018-04-16 noxloader updates,while OTA or rebranding using any tool and choose which methods you tried to solve.
we need to show how many people we are,and seek for solution or encourage BOX groups to do something for this matter.
Even huawei may help us if the ysee we are bunch of people.
Click to expand...
Click to collapse
The only versions that will brick (so far anyway) are BLA-L29C636B137 and ALP-L29C636B134 from 16/4, neither is a noxloader version.
Bricks occur when you update/downgrade/rebrand FROM those 2 firmwares.
ante0 said:
The only versions that will brick (so far anyway) are BLA-L29C636B137 and ALP-L29C636B134 from 16/4, neither is a noxloader version.
Bricks occur when you update/downgrade/rebrand FROM those 2 firmwares.
Click to expand...
Click to collapse
maybe i recall wrong but after first time seeing these noxloaders,somethings changed,anyway i edited the post.thanks.
My BLA-L29 is still on the black screen and I can not even revert to DC-Phoenix. After upgrading to 138.
Used funky
mikaole said:
Used funky
Click to expand...
Click to collapse
i think your phone was in fastboot or bootloop,we are talking about hardbrick bro,black screen not even charge led in our devices.
I bricked my Huawei Mate 10 too
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Carnage! said:
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
did you tried huawei pc app (hisuite)?
your problem maybe is because magisk, try to install in twrp "magisk uninstaller". or try to install via twrp, recovery_ramdisk.img, kernel.img and ramdisk.img from the last rom of android 8 (extract with huaweiupdateextractor), then install via twrp with hrupdater 0,4 the same update.zip that you extract the kernel.img, recovery and the other img that I told you.
look at the guides of the preocesses that I told you, if you have any question let me know
durc12 said:
did you tried huawei pc app (hisuite)?
your problem maybe is because magisk, try to install in twrp "magisk uninstaller". or try to install via twrp, recovery_ramdisk.img, kernel.img and ramdisk.img from the last rom of android 8 (extract with huaweiupdateextractor), then install via twrp with hrupdater 0,4 the same update.zip that you extract the kernel.img, recovery and the other img that I told you.
look at the guides of the preocesses that I told you, if you have any question let me know
Click to expand...
Click to collapse
Yes, I tried hisuite but it says my device isn't supported. I will try your suggestion and will get back to you if I have questions
Carnage! said:
Yes, I tried hisuite but it says my device isn't supported. I will try your suggestion and will get back to you if I have questions
Click to expand...
Click to collapse
If the update process didn't even started, you need to flash stock Pie kernel, recovery_ramdisk and system, using fastboot.
This should get you back to a working OS.
Pretoriano80 said:
If the update process didn't even started, you need to flash stock Pie kernel, recovery_ramdisk and system, using fastboot.
This should get you back to a working OS.
Click to expand...
Click to collapse
I see. I only tried flashing the recovery_ramdisk and system.img. I will try it later and I will let you know if it worked.
Pretoriano80 said:
If the update process didn't even started, you need to flash stock Pie kernel, recovery_ramdisk and system, using fastboot.
This should get you back to a working OS.
Click to expand...
Click to collapse
as far as I can read, I think he wants to come back to OREO, so he has to install first recovery_ramdisk.img, kernel.img and ramdisk.img from 8.0.0.143 (extracting those files with huaweiextractorupdate) and then flashing those files via fastboot or your twrp version. Then, he has to use hrupdater 0.4 to install 8.0.0.143
Am I right Pretoriano80?
please, fell free to correct me if i have commited any mistake
PD: MANDATORY TO HAVE UNLOCKED BOOTLOADER FOR THE PROCESS
durc12 said:
as far as I can read, I think he wants to come back to OREO, so he has to install first recovery_ramdisk.img, kernel.img and ramdisk.img from 8.0.0.143 (extracting those files with huaweiextractorupdate) and then flashing those files via fastboot or your twrp version. Then, he has to use hrupdater 0.4 to install 8.0.0.143
Am I right Pretoriano80?
please, fell free to correct me if i have commited any mistake
PD: MANDATORY TO HAVE UNLOCKED BOOTLOADER FOR THE PROCESS
Click to expand...
Click to collapse
No, first he has to recover the current OS, and my advise was only for that.
Then he will need to use a TWRP + NoCheck combo, to get back to Oreo.
HuRUpdater can't get you back to Oreo so you guys should stop using that with Pie.
Mate 10 Pro BLA-L09
I also installed the EMUI 9.0 on my device using the HWOTA8 method which was successful. The EMUI 9.0 (9.0.0.108). I didn't have any issues too. After a while I decided to switch back to EMUI 8.0. using also HWOTA8 I put three zip files with EMUI8 (update.zip .....). Update ended with error. That's it.
I only have fastboot working but I am able to flash only few partitions System.img, Recovery_ramdisk.img, Kernel.img. I tried to flash them many times - nothing.
Couple months ago I messed up with my phone and I had to buy and use DC-Phoenix. It worked for me then. This time did not because DC-Phoenix only support EMUI 8. They refunded me money I paid for - that's good thing but my phone is still bricked.
Then I've found MultiTool for Huawei
https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
It shows that
https://gyazo.com/70820957c6638e27bfe79418dfb07e3e
(Firmware 9.0.0.108,device bla-l09,no serial number, no IMEI and battery status 0)
HiSuite says device is not supported.
Is there any way to force HiSuite to recover not supported device?
Anyone knows the solution?
I booked my phone for repair with Huawei Service.
diowil4 said:
I also installed the EMUI 9.0 on my device using the HWOTA8 method which was successful. The EMUI 9.0 (9.0.0.108). I didn't have any issues too. After a while I decided to switch back to EMUI 8.0. using also HWOTA8 I put three zip files with EMUI8 (update.zip .....). Update ended with error. That's it.
I only have fastboot working but I am able to flash only few partitions System.img, Recovery_ramdisk.img, Kernel.img. I tried to flash them many times - nothing.
Couple months ago I messed up with my phone and I had to buy and use DC-Phoenix. It worked for me then. This time did not because DC-Phoenix only support EMUI 8. They refunded me money I paid for - that's good thing but my phone is still bricked.
Then I've found MultiTool for Huawei
https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
It shows that
https://gyazo.com/70820957c6638e27bfe79418dfb07e3e
(Firmware 9.0.0.108,device bla-l09,no serial number, no IMEI and battery status 0)
HiSuite says device is not supported.
Is there any way to force HiSuite to recover not supported device?
Anyone knows the solution?
I booked my phone for repair with Huawei Service.
Click to expand...
Click to collapse
It should be possible to recover your phone.Tried to flash Pie B108 recovery_ramdisk, kernel and system with fastboot?
Pretoriano80 said:
It should be possible to recover your phone.Tried to flash Pie B108 recovery_ramdisk, kernel and system with fastboot?
Click to expand...
Click to collapse
I have tried. I flashed Pie 9.0.0.108 - nothing, 9.0.0.112 (chinese ver) - nothing. I tried BLA-L09 8.0.0.148(SP1C432) - nothing.
After flashing recovery_ramdisk, kernel and system of all above firmware there is no change only fastboot is working.
The problem is that downgrade process from Pie to Oreo went to 95% ( I thing - I don't remember exactly but for sure it was 90 something). It could have changed most of partitions to Oreo but left one or few unchanged (like verlist.img, xloadr.img, vendor.img, product.img).
From fastboot I am able to change (flash) only few partitions.
Do you gays know any other tools like dc-phoenix to force to flash all partitions. (Couple months ago when I used DC Phoenix with Emui 8 it used backdoor to flash difficult partitions.)
Example:
Writing XLOADER partition with file X:\Install\Telefony\Huawei_Mate_10_pro\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Writing XLOADER partition with file X:\Install\Telefony\Huawei_Mate_10_pro\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...OK
diowil4 said:
I have tried. I flashed Pie 9.0.0.108 - nothing, 9.0.0.112 (chinese ver) - nothing. I tried BLA-L09 8.0.0.148(SP1C432) - nothing.
After flashing recovery_ramdisk, kernel and system of all above firmware there is no change only fastboot is working.
The problem is that downgrade process from Pie to Oreo went to 95% ( I thing - I don't remember exactly but for sure it was 90 something). It could have changed most of partitions to Oreo but left one or few unchanged (like verlist.img, xloadr.img, vendor.img, product.img).
From fastboot I am able to change (flash) only few partitions.
Do you gays know any other tools like dc-phoenix to force to flash all partitions. (Couple months ago when I used DC Phoenix with Emui 8 it used backdoor to flash difficult partitions.)
Example:
Writing XLOADER partition with file X:\Install\Telefony\Huawei_Mate_10_pro\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Writing XLOADER partition with file X:\Install\Telefony\Huawei_Mate_10_pro\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...OK
Click to expand...
Click to collapse
I think you should use my TWRP + NoCheck recovery and try to flash the Pie beta again.
Pretoriano80 said:
I think you should use my TWRP + NoCheck recovery and try to flash the Pie beta again.
Click to expand...
Click to collapse
After flashing It cannot boot to recovery.
diowil4 said:
After flashing It cannot boot to recovery.
Click to expand...
Click to collapse
So you can only boot to fastboot, no matter what?
Pretoriano80 said:
So you can only boot to fastboot, no matter what?
Click to expand...
Click to collapse
Yes.

flashing rom via TWRP with frp lock?

Hi, I'm in a bad situation. My honor 9 lite (Europe) has no OS, frp lock. But it does have TWRP installed.
My question would be, since I can't flash an OS (given the frp lock) via fastboot, would it work via TWRP? Or should I just give up and buy a new phone?
Thanks a lot.
Best
Since you have TWRP, try using HURUpdater tool. It is compatible with H9L.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
BS4388 said:
Since you have TWRP, try using HURUpdater tool. It is compatible with H9L.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Hi,
thanks a lot for the tip. Unfortunately, I keep getting an error when flashing following the instructions.
I discovered that nonetheless I can flash roms with TWRP. There is one particular rom, this one https://forum.xda-developers.com/honor-view-10/development/rom-t3753555 that works particularly.
However, my device with that rom keeps giving me an error "bluetooth keeps stopping". Any way to solve that?
I really don't know a solution.
Can't you enable OEM unlock in settings/developer options? so that to make frp unlocked?
Yes.
After that, I was able to finally flash stock rom
However, there's a new issue: wifi doesn't work. It actually seems like whatever rom I flash, wifi won't work the slider turns off as soon as I turn it on
Did you wipe data/factory reset through eRecovery after flashing? That is important in most cases!
BS4388 said:
Did you wipe data/factory reset through eRecovery after flashing? That is important in most cases!
Click to expand...
Click to collapse
No I did not. I think I used TWRP to do that. Will do with eRecovery next time and update you
I am still without WiFi.
I think the problem lies in the fact that my stock ROM comes from here: https://forum.xda-developers.com/9-lite/how-to/guide-unbrick-device-recover-bootloop-t3772563
I had oreo 8.1 before brick, and the rim above that I flashed is 8.0 and Indian version (not european). That maybe could explain the issue.
Problem is, I would need a system.img stock ROM to file and I can't seems to find that. In Huawei firmware finder, I only get update.zip kind of files and TRWP returns error when flashing that or when I use the HuRUpdater tool.
Also, I've noticed it's not just the WiFi, but also security options and themes for some reason
you need a working frp image which in twrp can flashed via dd... so the frp lock is gone...
In telegram group you can find image.
gabfur01 said:
I am still without WiFi.
I think the problem lies in the fact that my stock ROM comes from here: https://forum.xda-developers.com/9-lite/how-to/guide-unbrick-device-recover-bootloop-t3772563
I had oreo 8.1 before brick, and the rim above that I flashed is 8.0 and Indian version (not european). That maybe could explain the issue.
Problem is, I would need a system.img stock ROM to file and I can't seems to find that. In Huawei firmware finder, I only get update.zip kind of files and TRWP returns error when flashing that or when I use the HuRUpdater tool.
Also, I've noticed it's not just the WiFi, but also security options and themes for some reason
Click to expand...
Click to collapse
The system.app file you search for is in the update.zip file you get and you cannot flash update.zip directly from twrp, you need HuRupdater for that and the dload method doesn't work for almost anyone including me.
And you need correct the firmware for your motherboard if you want your phone to work properly.
First tick oem unlocking in developer options. Then unlock fastboot and flash TWRP.
Since you are able to boot up check your varient, the complete one not just the LLD but the rest too. Search for it in Huawei firmware finder and download the latest firmware for your model. You'll get 3 links and you'll need all three.
Download HuRupdater 0.3 zip and then rename the 3 files you got as told in the HuRu instructions. get twrp image and rename it to recovery.img and put all files in the same folder.If you want to completely revert to stock you don't have to have recovery.img but keep it just in case.
Then flash HuRupdater using twrp. You should be up and running if you did everything right.
You can then remove the recovery.img and then flash again using HuRupdater and relock the fastboot too later if you wanna play things safe using fastboot relock bootloader 'your code' .
please help me, honor 9 lite last night my flash rom forgot the data format so now can not boot into the operating system, locked FRP, can not enter the TWRP.
Hello, I know it's been a long time. I put the issue aside for a few months as I had another phone to use in the meanwhile just wanted to let you know i Just did the procedure you described and it worked perfectly! The phone is back to life :laugh:

Go back to stock rom

Hi,
I've installed a custom rom, but now i can´t install updates, Pie for example.
How can i unroot and go back to stock rom?
Thanks
aalmeida1972 said:
Hi,
I've installed a custom rom, but now i can´t install updates, Pie for example.
How can i unroot and go back to stock rom?
Thanks
Click to expand...
Click to collapse
I'd suggest HurUpdater: https://forum.xda-developers.com/ho...h-official-firmware-recovery-t3769279/page111
OTAs do work with an unlocked bootloader, but not with root or custom kernels.
Does this works with the P10? In the post i ddin´t found the P10.
And if it works, wich zip file i have to choose? And i have root
Thanks
Try my guide (Tutorial #2, Oreo to Oreo)
After that do a factory reset with eRecovery (boot with Vol+ and connected USB).
What also should work is flashing the system.img manually via fastboot.
For this extract the system.img from the correct firmware version with Huawei Update Extractor.
Connect your phone to your PC, boot into fastboot and flash with "fastboot flash system PATH\TO\SYSTEM.IMG".
After that do a factory reset with eRecovery (boot with Vol+ and connected USB).
Note for the next time: backup your system partition via TWRP before flashing the custom rom.
Also note that a factory reset is needed, without your phone won't boot, so backup your personal data before doing it.
aalmeida1972 said:
Does this works with the P10? In the post i ddin´t found the P10.
And if it works, wich zip file i have to choose? And i have root
Thanks
Click to expand...
Click to collapse
Yes, it works on the P10. You can download the files with the firmware finder app. I'd recommend the newest oreo version for your customisation (e.g. B382 for C432).
But Jannomag's solution should work equally well.
Wich Jannomag´s thread?
Do you have the link, please?
Thanks
aalmeida1972 said:
Wich Jannomag´s thread?
Do you have the link, please?
Thanks
Click to expand...
Click to collapse
The fourth message in this thread
I am sorry, maybe i am just dumb but i can't find it
I followed the guide but know i am i an bootloop. I get the message "your device has failed verification and may not work properly"
It restarded, but as D188-L29!!! I download the VTR-L29 on https://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C432&firmware_page=0
Now i can't update or nothing
aalmeida1972 said:
It restarded, but as D188-L29!!! I download the VTR-L29 on https://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C432&firmware_page=0
Now i can't update or nothing
Click to expand...
Click to collapse
Possibly you renamed the wrong customisation file (i did it once for the 09 while I needed the 29).
Which one did you download? And did you flash manually or did you use my script?
Download my oeminfo, it's from VTR-L29C432 Version 8.0.0.380, while the version doesn't really matter.
Flash it via TWRP using "Install" and "Use Image". Flash it to oeminfo partition. Then do my update script again.
I followed the guide to do Oreo to Oreo - basically wanting to get from custom Rom (fRomFuture B370) back to stock, so I chose the same firmware version to extract. Flashed everything with the script and it went fine and it boots and works.. but
The resolution seems to be off, too low and the right side of the screen is unresponsive to touch (about 1cm )
EDIT- Rolled back to fRomFuture B370 for now - need to find a way to get back to stock, as want to move on to Openkirin ROM instead
HI, i have a vtr-l29 root, i want to unroot(version oreo), how do i do it? what do i need to flash?. thank you Alex

Categories

Resources