[APP][5.0+]AndroidAuto carNotifier (Multi-language and Email support) - Paid Software Announcement and Discussion

Beta 1.0 released
I will like to start saying a very big thank you to @bggold who asked me to consider this in the first place
While there isn't any way to use the nice Google Assistant voice, and it's still rough around the edges, this demonstrates how we can use Android Auto in a multi-lingual environment as well as how to read out and reply emails.
The concept is very simple, instead of relaying on Android Auto to read out the notifications I have created a small app which mimics that behaviour, with some extras:
1) It try to do a language detection for each test, and use the appropriate TextToSpeech
2) It allows the user to select which app notification does he/she want's to read
3) If the content is really long (like a lengthy email) the app will prompt the user if it want's to go ahead with the message readout or not
4) If notification supports quick-reply the app will prompt the user for a reply (in the same language as the the original message)
Planning to support a lot of languages but there I will need user input, I have translated the basic strings to around 70 languages using Google translator, but I can tell it's not quite right (I can see with the languages I do speak)
Best part, app won't be affected by 3rd party restriction at all and it won't require root either, however I'm pretty sure Google will not allow it on the PlayStore
Beta version available now on XDA Labs.
App will be payable, however current beta is free so grab a copy while you can
To use the app you will need to enable unknown sources in Android Auto, simply open Android Auto, go to About, tap the "About Android Auto" header 10 times till you become a developer, then from the 3 dotted right menu select developer options and enable "Unknown sources"

Emil Borconi said:
Beta 1.0 released
I will like to start saying a very big thank you to @bggold who asked me to consider this in the first place
While there isn't any way to use the nice Google Assistant voice, and it's still rough around the edges, this demonstrates how we can use Android Auto in a multi-lingual environment as well as how to read out and reply emails.
The concept is very simple, instead of relaying on Android Auto to read out the notifications I have created a small app which mimics that behaviour, with some extras:
1) It try to do a language detection for each test, and use the appropriate TextToSpeech
2) It allows the user to select which app notification does he/she want's to read
3) If the content is really long (like a lengthy email) the app will prompt the user if it want's to go ahead with the message readout or not
4) If notification supports quick-reply the app will prompt the user for a reply (in the same language as the the original message)
Planning to support a lot of languages but there I will need user input, I have translated the basic strings to around 70 languages using Google translator, but I can tell it's not quite right (I can see with the languages I do speak)
Best part, app won't be affected by 3rd party restriction at all and it won't require root either, however I'm pretty sure Google will not allow it on the PlayStore
Beta version available now on XDA Labs.
App will be payable, however current beta is free so grab a copy while you can
To use the app you will need to enable unknown sources in Android Auto, simply open Android Auto, go to About, tap the "About Android Auto" header 10 times till you become a developer, then from the 3 dotted right menu select developer options and enable "Unknown sources"
Click to expand...
Click to collapse
Thanks for making this app!
After first start it asked for notification permission and then it was gone to build the list of installed apps/services - endless...
So I've forced close the app after minutes, went to app info/permissions, and enabled unselected permissions for it.
After that the app works now, as it should!
I'll test the functionality today while using AA in my car.
Regards bitstra

bitstra said:
Thanks for making this app!
After first start it asked for notification permission and then it was gone to build the list of installed apps/services - endless...
So I've forced close the app after minutes, went to app info/permissions, and enabled unselected permissions for it.
After that the app works now, as it should!
I'll test the functionality today while using AA in my car.
Regards bitstra
Click to expand...
Click to collapse
Thanks. It was 3 am )) updating the app now.

This is exactly what I needed. Unfortunately I couldn't get it to work. Using Samsung S9 plus running Oreo. Gave read permission to the app, enabled developer settings on Android Auto, enabled unknown sources, enabled whatsapp and Gmail.
Whatsapp notifications haven't changed and it continues to read the foreign text in English. Gmail notifications don't pop up at all.
Any suggestions?

yavuzyay said:
This is exactly what I needed. Unfortunately I couldn't get it to work. Using Samsung S9 plus running Oreo. Gave read permission to the app, enabled developer settings on Android Auto, enabled unknown sources, enabled whatsapp and Gmail.
Whatsapp notifications haven't changed and it continues to read the foreign text in English. Gmail notifications don't pop up at all.
Any suggestions?
Click to expand...
Click to collapse
Not sure if you saw but there is a new release. It fixes this issue. Just remember to reboot after updating.

Unfortunately I have the same problem as @yavuzyay. I'm using a Samsung Galaxy S6 edge with Android 7.0 and Carnotifier Beta v3.

Thanks to @yavuzyay for bugreport and Turkish language input.
I have identified the problem where the app was crashing in case you where using AA on the phone only, and this has been now fixed.
@CeldeSuS - Are you phone only or are you using AA on the car? If phone only, download the new beta 1.4

Emil Borconi said:
@CeldeSuS - Are you phone only or are you using AA on the car? If phone only, download the new beta 1.4
Click to expand...
Click to collapse
I'm using AA on the car (Alpine X802D-U head unit). I'll try the new beta anyway and report back.

Awesome. Works perfectly.

V4 work fine with SM960F(android 8.0) & RLink1 !
Great job!

Very good stuff!
I use it with the now playing feature - basically phone picks up music on the radio,.detects the song and artist and throws a notification. This app picks that up and shows it as a notification on the car screen! I have disabled read out. So it stays as a simple notification.
Quick question - haven't been able to try it - if I set zero seconds as the duration, will it leave the notification forever?

Tested but not working as expected. Line is an application which doesn't support Android Auto.
Positive: Yes, Car Notifier shows there is a message on Line.
Negative: Can't do anything, it won't read the message, the notification stays in grey color and nothing happens when I click on the message.
Cheers
Tom

tom1807 said:
Tested but not working as expected. Line is an application which doesn't support Android Auto.
Positive: Yes, Car Notifier shows there is a message on Line.
Negative: Can't do anything, it won't read the message, the notification stays in grey color and nothing happens when I click on the message.
Cheers
Tom
Click to expand...
Click to collapse
You can't click the notification to have it read at this time. If you want them read to you enable the read option.

"Read out notifications" is enabled in the settings, my Honda headunit is hacked and I have root access, so I don't think this is related to that.
Cheers
Tom

tom1807 said:
"Read out notifications" is enabled in the settings, my Honda headunit is hacked and I have root access, so I don't think this is related to that.
Cheers
Tom
Click to expand...
Click to collapse
I'm sure you have but have you checked all the permissions?

CarNotifier asks only permissions to Microphone and Phone, both are granted.
Wondering now whether it has something to do with the new Android Auto v3.8.584554 where some on Reddit claim, that notification is broken
Cheers
Tom
Edit: Maybe the the new AA version interferes with CarNotifier, because AA can show now also message preview
More edit: My friend tested on the Samsung S7 (I have a OnePlus 3T). Also on his mobile nothing happens with Line.
Can't read out and nothing happens in AA when click on it

Is there an app for Speed cams like in your obd2aa app, to have only the speed cam notification?

tom1807 said:
CarNotifier asks only permissions to Microphone and Phone, both are granted.
Wondering now whether it has something to do with the new Android Auto v3.8.584554 where some on Reddit claim, that notification is broken
Cheers
Tom
Edit: Maybe the the new AA version interferes with CarNotifier, because AA can show now also message preview
More edit: My friend tested on the Samsung S7 (I have a OnePlus 3T). Also on his mobile nothing happens with Line.
Can't read out and nothing happens in AA when click on it
Click to expand...
Click to collapse
I am running the new aa and it is working. Get Emil a bug report right after it happens.
The only thing you can do at this time is swip away the notifications. Clicking them will not do anything.
Thanks

After more testing, I do believe the culprit is Line. Gmail works as expected, Facebook also (just for test).
However, Line refuses, which is actually the reason to install the program in the first place.
Probably one of the few programs which won't work.
Great program though.
Cheers
Tom

Hi guys.
I'm finally back in the UK and in front of my PC, I've also managed to tied up quiet a few of my loose ends and I have no big project starting this year. I will dedicated the last 2 weeks of this years to the following:
1) Looking into fixing some of the FC for obd2aa, also try to find a solution for non-standard PIDs
2) Get AA GateWay to Beta/Stable version (most work needs to be done on this app)
3) Fix some issues and FC with HUR (including Waze sound cut off).
4) Get the carNotifier to a stable version.
January and February are again fully booked so I will focus on stability rather then adding new features especially because obd2aa and HUR and fairly mature apps with most of the functions already covered.
For some reason I'm not really getting any notifications from XDA and being a lot on the road I don't visit the site too often lately, therefore I will kindly ask you if you need support, please email me directly to [email protected].

Related

[APP][2.3.3+][NFC] NFC ReTAG PRO --> Temporary SALE

Hello everybody,
just started a temporary sale for NFC ReTag PRO...
Use any NFC tag (write protected and re-writable) to trigger multiple functions on your device!
You can use this app to associate multiple functions (e.g. toggle Wlan, Bluetooth, Mobile Data, Airplane mode, start navigation,run Tasker task, launch any installed app, use media buttons, call a phone number, add a timestamp, calendar entry and many more) to a specific NFC Tag via an app internal database.
Get it NOW and save some money
Link to the Support thread:
forum.xda-developers.com/showthread.php?t=1477138http://
Free version also available !
Nice and first! Downloading now...
Text to speech bug
Hi all,
I've come across a weird bug that once i have run the "speak current time" actions under the labs section, my phone continues to speak the time for other various actions (eg opening/closing folders, setting the alarm etc).
So far there seems to be no way of stopping it, even killing the Google text to speech service does nothing.
Anyone else with this problem or any solutions?
Regards
G
GenePaton said:
Hi all,
I've come across a weird bug that once i have run the "speak current time" actions under the labs section, my phone continues to speak the time for other various actions (eg opening/closing folders, setting the alarm etc).
So far there seems to be no way of stopping it, even killing the Google text to speech service does nothing.
Anyone else with this problem or any solutions?
Regards
G
Click to expand...
Click to collapse
Hi G,
received your e-mail and replied this via e-mail a couple of minutes ago ...
Hi Gene,
No, you are the first reporting this. There is no Retag background service which could cause this and NFC Retag doesn´t change a TexttoSpeech setting, therefore I would say it´s not related, but stranger things had happen.
First thing I thought, it´s probably related to the CAR Mode ... a lot of devices speak a lot of things (Sms received, folder opened etc. ) while in car mode..annoying and mostly unexpected ... the first time it happen to me, I was completely clueless what was causing this and how to disable.. So please check if the car mode is enabled.
Second thought was the Standard Android Accessibility feature, please check under Settings--> Accessibility that the TalkBack option is disabled (provides spoken feedback for blind users ).
If this doesn´t help, reboot your device and please check again...If the issue still occurs, could you please give us some more details (device, firmware version, etc.) and if possible a log file, so we could analyze this in detail?
ascsa said:
Hi G,
received your e-mail and replied this via e-mail a couple of minutes ago ...
Hi Gene,
No, you are the first reporting this. There is no Retag background service which could cause this and NFC Retag doesn´t change a TexttoSpeech setting, therefore I would say it´s not related, but stranger things had happen.
First thing I thought, it´s probably related to the CAR Mode ... a lot of devices speak a lot of things (Sms received, folder opened etc. ) while in car mode..annoying and mostly unexpected ... the first time it happen to me, I was completely clueless what was causing this and how to disable.. So please check if the car mode is enabled.
Second thought was the Standard Android Accessibility feature, please check under Settings--> Accessibility that the TalkBack option is disabled (provides spoken feedback for blind users ).
If this doesn´t help, reboot your device and please check again...If the issue still occurs, could you please give us some more details (device, firmware version, etc.) and if possible a log file, so we could analyze this in detail?
Click to expand...
Click to collapse
Hi ascsa,
Thanks i got your email. Great to see such quick response from developers. I wasn't expecting it, hence the post here as well.
Just to clarify for any other readers, i'll repeat what i sent in my reply email to you.
Driving mode and talkback are disabled on my device.
I found a temporary fix by clearing the data from Application Management->All->Google text to speech service, but it then randomly starts again at a later time. I think the fault may lay more with Android than any app as there are a couple of other applications out there having the same issue. Something about Android calling the wrong service (text to speech) when various apps are started.
For your and others information, my device is a Samsung Galaxy S3 GT-I9300T Android 4.1.2 Stock Vodafone AU ROM, rooted. Baseband I9300TDUELL2.
Cheers
G
GenePaton said:
Hi ascsa,
Thanks i got your email. Great to see such quick response from developers. I wasn't expecting it, hence the post here as well.
Just to clarify for any other readers, i'll repeat what i sent in my reply email to you.
Driving mode and talkback are disabled on my device.
I found a temporary fix by clearing the data from Application Management->All->Google text to speech service, but it then randomly starts again at a later time. I think the fault may lay more with Android than any app as there are a couple of other applications out there having the same issue. Something about Android calling the wrong service (text to speech) when various apps are started.
For your and others information, my device is a Samsung Galaxy S3 GT-I9300T Android 4.1.2 Stock Vodafone AU ROM, rooted. Baseband I9300TDUELL2.
Cheers
G
Click to expand...
Click to collapse
No Problem ... ... but let´s move to the official support thread (http://forum.xda-developers.com/showthread.php?t=1477138&page=100) ...because this is an old thread ...NFC Retag PRO is currently NOT on sale ... and we shouldn´t confuse the users ...
Just to clarify for any other readers, my e-mail answer to your last post :
The Galaxy S3 GT-I9300 (international model) is one of our main testing devices. Not sure if, there is a problem with the Vodafone Rom or the Australian T model, but it´s working fine here on 4.1.2.
Had a short look at our code and the official api and everything seems fine ... but without a log file or better a device on which we could reproduce the error it´s nearly impossible to be sure ...However, you mentioned it happens with other apps, too , so I would bet on some Vodafone "enhancements" ...
Btw. have you tried the Samsung TTS engine (settings--> language& input -->text-to-speech output--> preferred engine) instead of the Google engine?
I notice there are several versions of tasker. Which do I need?
Muscipula
Sent from my SM-G903F using Tapatalk

[App] SwitchMe - Share Your Device - MULTIPLE USER SPACES

Hi guys Im one of the developers of SwitchMe - an app that creates multiple user spaces. We have just released a new build which should fully support the T2s. Please have a look and let me know if everything is working as it should!
Thanks in advance, PR after the break:
.................................................................................................
SwitchMe - share your device!
SwitchMe is a unique application for root users that allows you to log in and out of multiple installations of Android just as you would on a desktop computer.
SwitchMe is a unique application for root users that allows you to log in and out of multiple user spaces just as you would on a desktop computer, with each profile having its own separate system settings, apps and data.
Some of the benefits of this technology:
Privacy
Securely share one device among many users, protect your accounts with passwords and log out automatically.
Kids
Create a profile for the kids, with only the apps and access you feel comfortable with.
Gaming
Overclock your profile for maximum performance in intensive games
Speed
Imagine a buttery smooth profile, with no kids games, messengers or bloatware to slow things down.
Testing
Create a sandbox profile to easily test applications and themes - no more nandroid nightmares!
Battery
Switch to a profile which only contains the essentials to save power through brute force.
Critical usage warning:
Incorrect use of this application can potentially harm your device. Before proceeding with use we strongly recommend that you perform a full nandroid backup through the device recovery.
READ THE HELP FILE CAREFULLY TO AVOID ISSUES
Without the Key, this application allows a maximum of 2 profiles and no security features.
Only the standard Android implementation of Apps2SD is currently supported. Use all others at your own risk.
Most devices should be compatible as long as they have enough free internal memory to create secondary profiles. The application will warn users if available memory is low.
These of course are only suggestions - there are plenty of other uses for the functionality SwitchMe offers.
Market link:
https://market.android.com/details?id=fahrbot.apps.switchme
The free version allows the creation of two profiles and has no security features.
Screens:
Looks cool. I'd try it out but I hate crippled apps that need a key to work properly.
Good luck.
scottx . said:
Looks cool. I'd try it out but I hate crippled apps that need a key to work properly.
Good luck.
Click to expand...
Click to collapse
And yet there you are, trying it out.
Also, the free app already gives you everything. You just have to use you brain to make it work.
Attitude... it affects the best of us.
Anything to report?
oh, this is great, now you can share the tablet with family members
R1kARD0 said:
oh, this is great, now you can share the tablet with family members
Click to expand...
Click to collapse
Yep, it does that.
Hi
very helpful app for a family with only one tablet, works almost 100% OK for us.
everytime i switch profile a android OS update is done, and after a few seconds im loged out again, after second logon it's OK
Galaxy Tab 2 10.1 GT-P5110 4.0.4 XXBLH4
Installed it on my GT2 3113 this morning and have been playing around with it. I do get the same android OS update thing as listed above when switching users. Also sometimes when the app opens it is a blank screen with no profiles or details listed. Running RomsWell V1.1 stock rooted/deodexed 4.0.4 rom
gooffeyguy said:
Installed it on my GT2 3113 this morning and have been playing around with it. I do get the same android OS update thing as listed above when switching users. Also sometimes when the app opens it is a blank screen with no profiles or details listed. Running RomsWell V1.1 stock rooted/deodexed 4.0.4 rom
Click to expand...
Click to collapse
Write through the app please.
ftgg99 said:
Write through the app please.
Click to expand...
Click to collapse
Will do
Thnks....
I love this app
I've noticed that if I don't use the switch screen options then the app works fine and doesn't give me the blank main page that I was experiencing previously.
---------- Post added at 01:14 AM ---------- Previous post was at 01:02 AM ----------
Also, what folder are the additional users profile/apps installed to?
Sent from my GT-P3113 using xda app-developers app
Im looking into it.
/DATA/.PROFILES is where everything is kept.
Guys there have been reports of the app being blank sometimes. Im trying to work out if this is something to do with superuser vs supersu. If youve experienced this, please let me know and be sure to tell me which of the two youre using...
I haven't been having that problem since I disabled the "switch screen functionality" in the settings. I do use the "fast switch" option and just open the app when I want to switch profiles. I am using SuperSU v0.96
gooffeyguy said:
I haven't been having that problem since I disabled the "switch screen functionality" in the settings. I do use the "fast switch" option and just open the app when I want to switch profiles. I am using SuperSU v0.96
Click to expand...
Click to collapse
You disabled the two main functions just because you sometimes couldn't see the statistics page? That seems a little extreme...
ftgg99 said:
You disabled the two main functions just because you sometimes couldn't see the statistics page? That seems a little extreme...
Click to expand...
Click to collapse
No, not just because it didn't show statistics, but I wouldn't be able to switch users unless I rebooted the device. When the problem would occur it also wouldn't bring up the switch user screen on the lock screen after waking up. If the icon notification was enabled it just opened up the statistic screen, not the user switch screen. I would get stuck in the current users profile until I rebooted and hoped the switch user screen would show after start up.
I like the functionality of the switch user screen but with it glitching like that on my device the only sure way to be able to switch profiles is to disable all that and just go into the app/statistic screen and click switch at the bottom.
I just noticed that there is a widget for this app that allows switching profiles without opening the app.
gooffeyguy said:
I just noticed that there is a widget for this app that allows switching profiles without opening the app.
Click to expand...
Click to collapse
I think your problem is with supersu (if thats what youre using). If possible, change it to superuser or at least make sure that youve set supersu up to always grant and whatever.
Supersu is very green and i wouldnt recommend it to anyone.
I have used this app for awhile now and really love it as it allows both my girlfriend and I to separately use my nexus 7 without interfering with each others settings. However, I recently flashed a CM 10 nightly (which i really like) and the switcher no longer works, freezing during each switch attempt.
I know it says CM 10 is not supported at the current time on the app page, but are there an plans to include this support in the future? Any info is appreciated and thanks for your work.

Google voice commands / "oke google"

Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Missing features.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
Click to expand...
Click to collapse
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
Phone calls? No. I believe this is a common issue, there is no phone hardware onboard. Though I'm not that familiar with that feature.
Email and other task could be handled with Autovoice if Google app can not. Again, not that familiar.
For me, the main missing feature was choice of navigation app. Nav questions will only launch GMaps, newer version can launch Waze or your nag app choice, by default.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Thanks for your comment. I tried your solution and its working better, i still get some errors time to time, but is much better...thanks
[
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
If you have a phone connected via BT you can make phone calls using OK Google.
Tumke32 said:
Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
Click to expand...
Click to collapse
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
newt_dunbarton said:
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
Click to expand...
Click to collapse
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Can you elaborate on this process please?
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
aledesma said:
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
Click to expand...
Click to collapse
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
shaiq123 said:
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Click to expand...
Click to collapse
Hi,
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
Were can i find this option? I have a nexus 5 and i updated my google now, but there no option like that in google now. Or do you mean the option "bluetooth headset" under voice?
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
I can't find any options in Xposed MTC related to what you are writing. Are you sure this option is in Xposed MTC?
Thank you!!!
carter.w.jason said:
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
Click to expand...
Click to collapse
I will give it a shot!!!
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Mr Bigglesworth said:
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Click to expand...
Click to collapse
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
dc5daft said:
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
Click to expand...
Click to collapse
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Mr Bigglesworth said:
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Click to expand...
Click to collapse
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
dc5daft said:
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
Click to expand...
Click to collapse
Thanks for this - and yes this where I had got to (which make me feel better!). And I too think the camera button may not be workable without root.
I think I need to change my plans and see if I can prevent the lockscreen to come on when connected to this bluetooth device. That way I can fall back to using ok google as the lockscreen prevents ok google from completing requests.
Okay - think I've done that and it was easy enough, now have a profile which when connected to HU through bluetooth does (1) set off wifi tether and (2) Set keyguard off. Then with (3) double tap to wake screen and (4) Ok google should be able to do what I need it to.
Last thing I'm wondering if you could do is to create a large voice dial icon (double normal size etc) on screen (in case initial ok google doesn't work)...

Tasker or another automate app working?

Hi,
I tried to find root cause, but unfortunately without success. Is there anybody, who using Tasker or another application for automatization of your phone without any issues?
My issue is, Tasker is still "delayed" - but same rules I used before on LG G3 (Android 6.0) - but now on P9 (DualSIM) didn't work.
I have task for Calendar Entry, where if I have appointment in my work calendar, during this time Sound mode is deactivated (only Vibrate).
Some suggestion? I tried white lists, etc. or another app with same bad behavior.
Thank you!
Well, I tried to deactivate power management app from Huawei over ADB and looks good now finally! Its workaround, but tasker now working very well as expected.
adb shell pm hide com.huawei.powergenie
Did you have "Run in Foreground" selected in Tasker's preferences?
My Tasker works fine with that selected, although I also have trusted the app in permissions manager, allowed it to auto launch & activated it as a device administrator in advanced settings/security.
Yeah, I tried every tip over Tasker or phone (EMUI settings) and only deactivate power management helps me.
I had the same problem with IFTTT. It worked perfectly with my LG G3, but was hopeless on the P9. No amount of white-listing or settings would work.
I even had the app in memory, with Google maps running, on GPS, screen on, and it still wouldn't trigger a location based profile.
I've had to revert to manually arming and dis-arming my home security system. Annoying.
I translate from spanish so I'm sorry if your phone shows menus with other name.
You must go to adjust > advanced adjusts > memory and store and at bottom of page "space clean". On new screen push on upper-right wheel, and now on last option "white list of memory clean". Finally look for your app and activate it.
If you don't include app here, clean system will close it on background and timers won't work. It solved my problems.
aidrabmol said:
I translate from spanish so I'm sorry if your phone shows menus with other name.
You must go to adjust > advanced adjusts > memory and store and at bottom of page "space clean". On new screen push on upper-right wheel, and now on last option "white list of memory clean". Finally look for your app and activate it.
If you don't include app here, clean system will close it on background and timers won't work. It solved my problems.
Click to expand...
Click to collapse
"Settings>Advanced settings>Memory & storage>Storage cleaner" and "Memory cleanup whitelist".
Using Agama, I can get an app to start following a reboot. However, I would like to start the App at every Startup. Does Automate or any other app let you do that?
carroamer said:
Using Agama, I can get an app to start following a reboot. However, I would like to start the App at every Startup. Does Automate or any other app let you do that?
Click to expand...
Click to collapse
Why would you need Tasker for that simple.
Settings, type in the Search Autostart and add your app to the list of apps to be started on every reboot.
You may also need to disable Battery Optimization for your app (to make sure it would still work in background when the phone sleeps with dark screen)
That should generally work for all Androids. I don't have Huawei P9 now for years, I remember that EMUI might have had specific Settings organization but there was also Autostart (or Auto start)...
zgfg said:
Why would you need Tasker for that simple.
Settings, type in the Search Autostart and add your app to the list of apps to be started on every reboot.
You may also need to disable Battery Optimization for your app (to make sure it would still work in background when the phone sleeps with dark screen)
That should generally work for all Androids. I don't have Huawei P9 now for years, I remember that EMUI might have had specific Settings organization but there was also Autostart (or Auto start)...
Click to expand...
Click to collapse
When I search 'Autostart' it produces 'No results'
carroamer said:
When I search 'Autostart' it produces 'No results'
Click to expand...
Click to collapse
I had P9 for three years (if you don't believe, you can find tons of my posts here back from 2017-2018)
Now, you have that phone, not me (I got rid of my last Huawei almost three years ago) - I cannot show you and I cannot look into the EMUI settings because I don't have the EMUI phone anymore
But I KNOW that there was a way in EMUI how to control which apps will be automatically started on boot - I know because I played with all that back in those years, II did need for many apps like AdAway, Find My Device and similar that required to be auto-started to operate correctly
Take your time and google and you'll find. Sorry, I tried to help you but I will no more waste my time on that. Huaweis are past time for me
And take your time, use your imagination, If not Autostart, google for EMUI startup manager or something similar to find the answer for your question on the Net

Android 11 cant set background permission for smartwatch

Hello folks. I've been reading a lot to fix this issue but no luck yet so I come to you. I have a Pixel 4XL running android 11, and a smartwatch brand Haylou Ls05, with the apk Haylou Fit.
The thing is I cant set the proper permissions to use the location services in the background. Mi GF has a android 10 phone and no problem.
I already tested everything I founded over the internet and nothing works. When I start running, the app goes good until the screens is off and the tracking of the running gets lost.
Any suggestion? Thanks in advance!!
Are you running without your phone? This watch doesn't have any GPS chip or functionality, so it is not going to track your location or track your your route by itself. Sorry if this was obvious already but I don't know what your use case is. On Android 10/11 you can control the location use on a per-app basis. If your watch app uses the newest API and supports this function, you will see under the Haylou Fit app permissions>>location the following: (Allow all the time/Allow only when using the app/Ask every time/ Deny). If you don't see this option in your app settings then the app itself needs to be updated. It's not the phone that is the issue, but the app. See the screenshot attached. Android 10 has this same functionality, so I'm not sure why your GF's is working correctly and yours is not. You may try removing and re-installing? Please post a screenshot of what you are seeing under location permissions for this app. Cheers.
Thanks very much for your answer. Yes, I run with the cellphone to use the gps of it because the watch does not have gps. Sorry i'm not very familiar with API, but I understand now that it is a problem of the app itself and not of android. My screenshot doesn't show the "allow all the time" item, as i would like to.
Any way to force it? like patching the app o magisk or something I could do? I like this watch very much , its small and light, and would really like to be able to use it..
Thanks you for the answer.
Agustín.
agucasta said:
Thanks very much for your answer. Yes, I run with the cellphone to use the gps of it because the watch does not have gps. Sorry i'm not very familiar with API, but I understand now that it is a problem of the app itself and not of android. My screenshot doesn't show the "allow all the time" item, as i would like to.
Any way to force it? like patching the app o magisk or something I could do? I like this watch very much , its small and light, and would really like to be able to use it..
Thanks you for the answer. Agustín.
Click to expand...
Click to collapse
Not that I know of. I still would like to know why the app it works on your GF's phone (10) and not yours (11) because they both have the same location security options. Is the "always" option available on hers, or is it working on the "when app is running"? Running the same version? This may be related to the API used by the app and until the dev updates it, it will not work. Try contacting the dev? Contact info is available on the Google Play Store.

Categories

Resources