Hi all, I've an italian Nokia 7 Plus TA-1055 single SIM.
I was on Oreo 8.1, unlocked bootloader, tried many GSI roms for tests and then I wanted to came back to stock rom for some phone call problems.
In order to do it, during my tests, I did a big mistake, I relocked again the bootloader with fastboot oem lock command without having stock boot, but one with TWRP inside instead :crying:
Now, at every boot, phone shows me a message like this: "Your device is corrupt. it can't be trusted and will not boot[...] the device will shutdown in 30 seconds[...]".
Now, I can boot in download mode, but I cannot flash or boot anything via fastboot, in order to unlock again, and even "nb0 tools FIH Mobile" could not help me (like many others, stucked at "Reflashing service boot" or similar).
Now, what can I do?
Thanks for who wants to help me, every help is appreciated
death_jax said:
Hi all, I've an italian Nokia 7 Plus TA-1055 single SIM.
I was on Oreo 8.1, unlocked bootloader, tried many GSI roms for tests and then I wanted to came back to stock rom for some phone call problems.
In order to do it, during my tests, I did a big mistake, I relocked again the bootloader with fastboot oem lock command without having stock boot, but one with TWRP inside instead :crying:
Now, at every boot, phone shows me a message like this: "Your device is corrupt. it can't be trusted and will not boot[...] the device will shutdown in 30 seconds[...]".
Now, I can boot in download mode, but I cannot flash or boot anything via fastboot, in order to unlock again, and even "nb0 tools FIH Mobile" could not help me (like many others, stucked at "Reflashing service boot" or similar).
Now, what can I do?
Thanks for who wants to help me, every help is appreciated
Click to expand...
Click to collapse
Hi. U can't use any tools without unlocking bootloader in my knowledge. Me also faced same issue some months ago. I did same mistake as urs. Finally i give it to Service Centre. Got a replacement with warranty. I told them a different fake story
Rajeev said:
Hi. U can't use any tools without unlocking bootloader in my knowledge. Me also faced same issue some months ago. I did same mistake as urs. Finally i give it to Service Centre. Got a replacement with warranty. I told them a different fake story
Click to expand...
Click to collapse
The "failed update" story do you think that may be right?
death_jax said:
The "failed update" story do you think that may be right?
Click to expand...
Click to collapse
Absolutely
Thanks to all, this thread can be closed, I solved with the help of hikari_calyx
Related
I get asked a lot how I rooted my Huawei Honor Note 8 so I thought I'd do a basic how to from memory on how I did it. It's relatively easy to do.
You'll need your phone's bootloader unlocked.
The files from Huawei's forums http://club.huawei.com/thread-10828573-1-1.html or https://drive.google.com/file/d/0BwyaxIga7s0qc0ZKRGtsdndwV3M/view?usp=sharing
The app is in chinese but has some english on the buttons.
To unlock bootloader:
Got bootloader unlock code with the app on the playstore "DC Huawei Bootloader Codes" (took about 8 hours to get)
Enable USB debugging on the phone & connect it to the computer.
Unlock the bootloader with the program downloaded. Use the first button on the first tab labeled bootloader. Put in unlock code in the pop up box & click ok.
To root:
Enable USB debugging on the phone & connect it to the computer.
Flash the recovery_twrp.img file with the program downloaded. Use the 2nd button on the first tab labeled recovery.
To change twrp into english, click on the 3rd down 2nd row button & then click on the globe button. The globe is really hard to hit! Keep trying till you get it Then select English.
Install SuperSU with TWRP
Should now be rooted!
Question. Is there anything I should do like backup my bootloader or something before starting this process?
benmeroff said:
Unlocking your bootloader will wipe the device; factory reset for sure, and I believe it also erases your internal storage (don't quote me on that though, not sure for this phone), but your OS will remain whatever stock version you had installed until you flash something else.
Click to expand...
Click to collapse
I did not backup anything.
Ok thanks.. I appreciate it
I have a question, or making a root and unlock the bootloader is associated with a full reset your data and settings that can be done root without losing data?
Nope
Sent from my EDI-AL10 using Tapatalk
Hi guys
I unlocked my note 8 successfully . In startup screen show your devives is unlocked and can not be trusted every time i restar the phone is it normal?
Second thing i flashed twrp by clicking on recovery button then after restarted i clicked on 3rd button of second row to change to english but it didnt say click on english
How to enter twrp recovey i tried pressing power button and volume up nothing happened
Plz help
Yuppers.. not trusted cuz ya unlocked it.
Should be volume up & power. You can also do it with the app. The 2nd tab... recovery. Will boot it into recovery too.
You have to click the globe button on the far right to get to the language. It's a ***** to hit! BTW... TWRP has reverted back to chinese a few time now for some reason on mine. It's kind of annoying considering how hard it is to hit that one button.
Questions about the root process
1) why do you need the unlock code?
2) Where can I find SuperSU for honor note 8? Can someone please provide a link?
3) Has anyone succeeded rooting?
Thanks in advance for the answers.
Please Help!
Everything was find, I unlocked the bootloader, installed TWRP, when I flashed SuperSU it bootloops!
Can someone please help.....
I'm not sure why it would be boot looping. I'd flash it again. Might even try a factory reset before flashing too. You're the first I've heard of with that problem. Make sure you're on version 22.
Sent from my EDI-AL10 using Tapatalk
problem solved
riffy504 said:
I'm not sure why it would be boot looping. I'd flash it again. Might even try a factory reset before flashing too. You're the first I've heard of with that problem. Make sure you're on version 22.
Sent from my EDI-AL10 using Tapatalk
Click to expand...
Click to collapse
The problem solved. I downloaded the latest version of SuperSU (2.78) , flashed it again with TWRP and everything loaded find.
I have a rooted device too.
Thanks for your answers!:good::fingers-crossed:
Glad to hear it worked out!
i downloaded "DC Huawei Bootloader Codes" then i entered my Note 8 IMEI and waited for 8 hrs and got an email telling me it is failed and i tries the other IMEI "since it's dual sim card phone" but no luck, same message.
Please help
The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days. Huawei site error
DC Huawei Bootloader Codes not working
please help
Hi,
I read of the possibility of the root of honor note 8 through oneclickroot, kingroot, etc.
It must first be unlocked bootloader or the software will to unlock?
For unlocking the bootloader you must use to force pay program dc-unlocker?
Thank you
DC Huawei Bootloader Code get but not unlock
Bootloader unlock codes
Hello guys... I have two Honor Note 8 phones and i wanna unlock them..
Official method - how to get Bootloader unlock codes does not work, so i downloaded dc-unlocker APP on google play..
Added there EMEIs, paid and was waiting almost 20 hours to get mails - operation failed..
I really dont know about any other way how to get these codes..
Can anyone help me please?
Thanks!
2Duky said:
Hello guys... I have two Honor Note 8 phones and i wanna unlock them..
Official method - how to get Bootloader unlock codes does not work, so i downloaded dc-unlocker APP on google play..
Added there EMEIs, paid and was waiting almost 20 hours to get mails - operation failed..
I really dont know about any other way how to get these codes..
Can anyone help me please?
Thanks!
Click to expand...
Click to collapse
in the app, there is another way to get it. choose not by imei.
write the developer of the app you did not get the code and you want a refund, and pay for the second method. this is how i did it.
arielisrl said:
in the app, there is another way to get it. choose not by imei.
write the developer of the app you did not get the code and you want a refund, and pay for the second method. this is how i did it.
Click to expand...
Click to collapse
Great! Many thanks for your quick reply! I contacted dc-unlocker support and thats what they replied..
Hello, this codes is from factory DB. Sorry, but there not all phones present in this db.
This happens frequently if phone has MEID .
But you can read code by cable, we support almost all huawei.
If reading by cable not acceptable we can do refund.
Im waiting for their next answers at my qustions, what exactly have i do..
I have to download their soft probably and make everything there..
I had no time to check their forum yet, im sure there will be instructions..
EDIT:
Oki so i used DC-unlocker software, received these codes and unlocked Bootloader successfully!
I have rooted both phones already!
I had an issues with ADB drivers on Win10 and on Win7 as well, could not find my devices in devices manager but i have solved it!
TWRP 3.02 with preinstalled SuperSU works fine on B027.. In one of my phones i had B029 so i had to downgrade to B027..
On B029 doesnt work flash command in cmd.. Stuck on "waiting for device"..
Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
iantechie1979 said:
Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
iantechie1979 said:
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Flash these files and it should, most probably, be fine.
use dload method as given here- https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240
as there are many different opinions on this method of using only update.app file but thats not true and it should be all the files.
Main file - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1165/g104/v71812/f1/full/update.zip
Data file- http://update.hicloud.com:8180/TDS/...1812/f1/full/hw/eu/update_data_full_hw_eu.zip
Flash both the files in order. 1st file will restore your system but then you need to have 2nd file so that apps are installed and all working fine.
After 1st file, it may reboot on its own and stuck on honor logo, reboot to recovery and then do factory reset, it will be fine.
Then let it boot to set up. Dont set your phone. Shutdown and flash the 2nd file.
boot and set up.
Good luck. Please provide feedback once done. In case of further issue, let me know and will dig more into this.
Oh this is hard.
chrisleLP said:
Oh this is hard.
Click to expand...
Click to collapse
What is hard?
shashank1320 said:
What is hard?
Click to expand...
Click to collapse
This problem.
chrisleLP said:
This problem.
Click to expand...
Click to collapse
you cant follow simple instructions? you shouldnt be on this forum if youre not ready to lose data or brick your device.
Thanks for your input so far people. Much appreciated. @shashank1320 I am downloading the files you suggested and will flash them exactly according to your instructions. I will get back to you in a couple of days with the result. Fingers crossed.
gopinaidu77 said:
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
Click to expand...
Click to collapse
Unfortunately my warranty has expired. The annoying thing is that if i had sent my device off six months ago when this first happened it would still be under warranty but in the UK there is only 1 service center, yes 1, and its hundreds of miles away! So i figured i could solve it myself. You live and learn.
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
iantechie1979 said:
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
Click to expand...
Click to collapse
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
shashank1320 said:
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
Click to expand...
Click to collapse
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
iantechie1979 said:
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
Click to expand...
Click to collapse
Did you flash those files i given? If not can try. Else i will have to look for other alternative
yeah i downloaded those files you had mentioned in your post and followed the instructions to the letter.
I've got a suggestion if you have tried all these above.
Can you try the following on ADB and then try to unlock OEM again.
fastboot oem relock YourUnlockCode
I've done the same and it helped, even when bootloader displayed UNLOCKED. Please try it. :good::good:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
NameNotFound74 said:
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
Click to expand...
Click to collapse
Try unlocking the bootloader again even if it is unlocked. It will factory reset the device and it should boot fine. Have stuck on this many a time and this was the method i followed.
I have never had a phone that has caused headaches like this one!!!
I have a jeter xt1922-2 and for nearly a month now.....suffered problems galore..... Ill explain....so take a seat.....and listen
I unlocked the bootloader the official way, all went swimmingly, then i followed quiksilvers guide to twrp....etc
but suffered problems with the phone in a reboot loop....
so, i thought, as its early days, i will flash a stock rom (i could only find a ALIJETER image, which was the only firmware i could find.....
So i did all the fastboot commands but the bootloader.img and partition thing said fail (phone said BAD KEY) but phone booted, after encrypting......
so for a week or so, I disabled a lot of items, and used non-root adblocker......was enjoying using the phone...
after a bit more time....I thought i would do the ota.....well that installed, and funnily enough, my OEM locking in dev settings was usable again.....so i did that, and installed twrp and root (phone now saying N/A), and had the phone purring like a cat.....but.......
i started to see firmware images becoming available, including JETER firmware, so naturally i downloaded the only one for my region - the UK.... file name : JETER_RETAIL_8.0.0_OPP27.91-35_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
so i tried flashing, but after the same sort of errors as before, it booted into the blue moto screen, and stayed there...
I saw somewhere, that if you relocked bootloader, it should be okay.....
so i tried fastboot oem lock ......... it gave a lot of errors and didnt lock........so i read a few more forums
and was told to try 'fastboot flashing lock' ......... and it worked.....locked again! but when trying to flash anything it failed.....so i tried everything to unlock again, but spent 6 hours trying to sort it, no luck....so i went to bed....
this morning, i thought to myself.........try unlocking via the way i did before, get code from motorola, so did all that, still not unlocked, and thought i would try fastboot flashing unlock .... it unlocked again!!!
and that brings me to the present time.......
tried the jeter firmware.....still the same as before........
tried the original alijeter firmware as i first tried, it boots and works, albeit with the BAD KEY message.....
How did i get that OEM option NOT GREYED OUT in dev settings???
How can i get the OTA to update again, as when i try again, it downloads, but when updating, it goes straight to the BOOTLOADER ...... ?!?!?!
I just want the phone to get back to normal......working twrp, root....etc like i did have it....
Fellow Moto G6 play users....please help a old man!!!!
biggary said:
I have never had a phone that has caused headaches like this one!!!
I have a jeter xt1922-2 and for nearly a month now.....suffered problems galore..... Ill explain....so take a seat.....and listen
I unlocked the bootloader the official way, all went swimmingly, then i followed quiksilvers guide to twrp....etc
but suffered problems with the phone in a reboot loop....
so, i thought, as its early days, i will flash a stock rom (i could only find a ALIJETER image, which was the only firmware i could find.....
So i did all the fastboot commands but the bootloader.img and partition thing said fail (phone said BAD KEY) but phone booted, after encrypting......
so for a week or so, I disabled a lot of items, and used non-root adblocker......was enjoying using the phone...
after a bit more time....I thought i would do the ota.....well that installed, and funnily enough, my OEM locking in dev settings was usable again.....so i did that, and installed twrp and root (phone now saying N/A), and had the phone purring like a cat.....but.......
i started to see firmware images becoming available, including JETER firmware, so naturally i downloaded the only one for my region - the UK.... file name : JETER_RETAIL_8.0.0_OPP27.91-35_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
so i tried flashing, but after the same sort of errors as before, it booted into the blue moto screen, and stayed there...
I saw somewhere, that if you relocked bootloader, it should be okay.....
so i tried fastboot oem lock ......... it gave a lot of errors and didnt lock........so i read a few more forums
and was told to try 'fastboot flashing lock' ......... and it worked.....locked again! but when trying to flash anything it failed.....so i tried everything to unlock again, but spent 6 hours trying to sort it, no luck....so i went to bed....
this morning, i thought to myself.........try unlocking via the way i did before, get code from motorola, so did all that, still not unlocked, and thought i would try fastboot flashing unlock .... it unlocked again!!!
and that brings me to the present time.......
tried the jeter firmware.....still the same as before........
tried the original alijeter firmware as i first tried, it boots and works, albeit with the BAD KEY message.....
How did i get that OEM option NOT GREYED OUT in dev settings???
How can i get the OTA to update again, as when i try again, it downloads, but when updating, it goes straight to the BOOTLOADER ...... ?!?!?!
I just want the phone to get back to normal......working twrp, root....etc like i did have it....
Fellow Moto G6 play users....please help a old man!!!!
Click to expand...
Click to collapse
Bad key is on all Moto devices after you unlock the bootloader. Once you get rid of dmverity it should change to n/a. Don't know why you keep flashing things like that. Your lucky the bootloaders didn't flash.
lately I was modifying my mi2 to be able to stay in miui 10, but I did a huge crap, which was first for not having taken the firmware update file at the time of the flash in twrp ... later of it he got the bootloader blocked and the twrp in black screen * probably by the state of the bootloader * then I tried to unblock it again, but persisted in the error '' token verify failed, plz reboot you device''ele reboot pro fastboot alone, but it was no good at all, because the mistake was the same .... but I like to do ****, so I went and tried the fastboot oem lock and then it ****ed up with everything .... now I have the system with the message (your system has been destroyed) and the bootloader blocked .... what makes it unusable and without any method of recovery ... the only things that still signal the life and the fastboot ... which is still recognized by the pc, and the edl mode, which enters, but does not work at all since the bootloader is blocked in the 2 steps ... and here I am, asking for help to you ... so, can someone save me from a beautiful spanking? I'm counting on you to save my skin ...
*I'm sorry for my horrible English, I'm Brazilian and it's the fault of that and google translator kkkkkkk*
Bro, i did a huge crap too. I dont know if this will help you but check this thread. Maybe help. i used this tool to unbrick my phone
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
afranioneto said:
Bro, i did a huge crap too. I dont know if this will help you but check this thread. Maybe help. i used this tool to unbrick my phone
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Click to expand...
Click to collapse
brother, the problem does not go into edl mode, but the bootloader blocked ... so I can do absolutely nothing, since to have the bootloader unlocked I need the system to be able to recover the system, and I do not care WHAT IS WITHOUT SYSTEM I can not do this ... understand?
but, thanks for trying to help .... well worth it!
Hi everyone, some weeks ago I converted my A2 in 6X because I wanted to test MIUI. Yesterday, dealing with an update my phone get into a bootloop. Well, I used MiFlash to fix it but I selected "flash and lock" (yes, I know, I'm stupid).
The main thing is that I'm in a Chinese ROM with lock bootloader and when I try to unlock it I get error 86023.
I dont know what to do. I've thought about test point to flash Xiaomi.eu but I'm not sure bcause the bootloader is locked.
Someone with a posibble solution? Thanks
Welcome to the Club
Same thing happened to me.
You can now choose between China Developer or Stable.
I tried many progs and tutorials to unlock the bootloader but no way.
If you need GooglePlayStore, CalenderSync and ContactsSync:
https://androidfilehost.com/?fid=818070582850489460
I'm now on stable V10.3.6.0.PDCCNXM and all is working quite well.
rafamb281 said:
Hi everyone, some weeks ago I converted my A2 in 6X because I wanted to test MIUI. Yesterday, dealing with an update my phone get into a bootloop. Well, I used MiFlash to fix it but I selected "flash and lock" (yes, I know, I'm stupid).
The main thing is that I'm in a Chinese ROM with lock bootloader and when I try to unlock it I get error 86023.
I dont know what to do. I've thought about test point to flash Xiaomi.eu but I'm not sure bcause the bootloader is locked.
Someone with a posibble solution? Thanks
Click to expand...
Click to collapse
It didn't happened to me for myself, but I just asked this question to get better knowledge about bootloader stuffs:
As I understood the current problem is this:
You need to unlock your bootloader again, there is just (as much as I know) 2 ways to approach, which both of them will not help you:
1. Unlocking as a A2 : but your device is not a A2 anymore, so the device will not be unlocked by this method.
2. Unlocking as a 6x : but this one won't be successful either since the dedicated unlocking program asks for a real 6X device with a registered IMEI number by factory, which in your case is NOT.
So, you will be left just with the options that need no Unlocked Bootloader, as mentioned above, like Chinese Stable versions. ( That in my opinion it does NOT sound awful. )
(BTW, every day comes with new procedures, maybe you can find a new method to unlocked the bootloader again, there was times that many expertise told, after stucking in ARB4 trap, you just need to find a suitable Trash for your device!, but now we all know that there is plenty new ways to deal with it).
sz.hatef said:
It didn't happened to me for myself, but I just asked this question to get better knowledge about bootloader stuffs:
As I understood the current problem is this:
You need to unlock your bootloader again, there is just (as much as I know) 2 ways to approach, which both of them will not help you:
1. Unlocking as a A2 : but your device is not a A2 anymore, so the device will not be unlocked by this method.
2. Unlocking as a 6x : but this one won't be successful either since the dedicated unlocking program asks for a real 6X device with a registered IMEI number by factory, which in your case is NOT.
So, you will be left just with the options that need no Unlocked Bootloader, as mentioned above, like Chinese Stable versions. ( That in my opinion it does NOT sound awful. )
(BTW, every day comes with new procedures, maybe you can find a new method to unlocked the bootloader again, there was times that many expertise told, after stucking in ARB4 trap, you just need to find a suitable Trash for your device!, but now we all know that there is plenty new ways to deal with it).
Click to expand...
Click to collapse
not the imei, it asks for 6x serial number which device is a2. you have to find someone who has authorized mi account to unlock this device. it is only way for now
q0kHaN said:
not the imei, it asks for 6x serial number which device is a2. you have to find someone who has authorized mi account to unlock this device. it is only way for now
Click to expand...
Click to collapse
And how I can find someone with one?
rafamb281 said:
And how I can find someone with one?
Click to expand...
Click to collapse
Authorized Customer Services, or a friend who works there
It is very possible that they can restore your phone (and as well your bootloader) as what it was in factory.
sz.hatef said:
Authorized Customer Services, or a friend who works there
It is very possible that they can restore your phone (and as well your bootloader) as what it was in factory.
Click to expand...
Click to collapse
R u talking about contact with Xiaomi? Or another service?
I tried it here http://unlock-unbrick.com/, but they also couldnt help me.
rafamb281 said:
R u talking about contact with Xiaomi? Or another service?
Click to expand...
Click to collapse
Yes, exactly.
Hello my friends, i managed to unlock the bootloader of my converted A2/6X.
I tried several times to switch from stable china to developer china but from 9.8.15 to 9.9.3 no one worked.
After installing one of the developer roms, the phone only shows the boot screen for 2 seconds and turns off, with charger it boots endlessly or shows the green battery symbol after some minutes.
One thing that works, is using a rubber band to fix "Vol+" and connect phone via usb or charger, mostly after 5-10 minutes it will enter the "Miui-Recovery", then you can start "Mi-Assistent" in the "Miui-Recovery" and flash back the stable china, so luckily no need of EDL.
After flashing the last 9.9.3 rom and the phone was all screwed up, again. I tried the original "miflash_unlock-en-2.2.624.14" and it worked.
I have done this "thousand" times before with all available unlock tools I found but never succeeded before.
Download: miflash_unlock-en-2.2.624.14
https://xiaomifirmware.com/downloads/download-mi-unlock-2-2-624-14-windows/
https://androidfilehost.com/?fid=889764386195916630
Now I tried to boot into recovery “fastboot boot twrp_wayne.img” but it didn't work, because the phone reboots or turns off after 2 seconds.
So I flashed the china stable via fastboot (worked), let it boot up, no setup, reboot to enter fastboot and flashed successful the orangefox-twrp.
Hope somebody can also unlock his bootloader or maybe it was just luck.
puxxi2004 said:
Hello my friends, i managed to unlock the bootloader of my converted A2/6X.
I tried several times to switch from stable china to developer china but from 9.8.15 to 9.9.3 no one worked.
After installing one of the developer roms, the phone only shows the boot screen for 2 seconds and turns off, with charger it boots endlessly or shows the green battery symbol after some minutes.
One thing that works, is using a rubber band to fix "Vol+" and connect phone via usb or charger, mostly after 5-10 minutes it will enter the "Miui-Recovery", then you can start "Mi-Assistent" in the "Miui-Recovery" and flash back the stable china, so luckily no need of EDL.
After flashing the last 9.9.3 rom and the phone was all screwed up, again. I tried the original "miflash_unlock-en-2.2.624.14" and it worked.
I have done this "thousand" times before with all available unlock tools I found but never succeeded before.
Download: miflash_unlock-en-2.2.624.14
https://xiaomifirmware.com/downloads/download-mi-unlock-2-2-624-14-windows/
https://androidfilehost.com/?fid=889764386195916630
Now I tried to boot into recovery “fastboot boot twrp_wayne.img” but it didn't work, because the phone reboots or turns off after 2 seconds.
So I flashed the china stable via fastboot (worked), let it boot up, no setup, reboot to enter fastboot and flashed successful the orangefox-twrp.
Hope somebody can also unlock his bootloader or maybe it was just luck.
Click to expand...
Click to collapse
Amazing Dude. [emoji108][emoji108][emoji108][emoji108][emoji108] Congratulations.