A custom kernel based on official Xiaomi sources.
It's my first kernel ever compiled so don't judge me too hard
What's new (r2.0):
upstreamed to Linux v4.4.165
compiled with Clang v8.0.2
fixed MTP bug
added MDSS KCAL driver
added Devfreq Boost driver
updated CPU input boost driver
...some small tweaks and clean-ups
History:
r1.0
Upstreamed to the latest linux kernel sources - 4.4.164 (from the initial 4.4.78)
Merged all CAF patches till the latest one - LA.UM.7.2.r1-05400-sdm660.0
added СNSS WLAN Host driver (Qualcomm Atheros CLD WLAN)
added Boeffla Wakelock Blocker
overclocked audio DSP and boosted power of speaker and headphones regulators
undervolted and overclocked CPU (just a little)
r1.5
fixed fingerprint bug
added DTS Eagle driver
added CPU input boost driver
added (and set as default) schedutil CPU governor
added bfq and fiops io governors (fiops as default)
...some small tweaks and clean-ups
That's all by now.
Suggestions and bug reports are welcome.
PS: after flashing - reflash Magisk!
Source: https://github.com/hypeartist/Xiaomi_Kernel_OpenSource/tree/wayne-o-oss-dev?files=1
hypeartist said:
A custom kernel based on official Xiaomi sources.
It's my first kernel ever compiled so don't judge me too hard
What was done:
Upstreamed to the latest linux kernel sources - 4.4.164 (from the initial 4.4.78)
Merged all CAF patches till the latest one - LA.UM.7.2.r1-05400-sdm660.0
added Boeffla Wakelock Blocker
overclocked audio DSP and boosted power of speaker and headphones regulators
undervolted and overclocked CPU (just a little)
That's all by now.
Suggestions and bug reports are welcome.
Download: View attachment 4650047
PS: after flashing - reflash Magisk!
Click to expand...
Click to collapse
Awesome, keep up the good work!
Does it work on AEX ROM ??
Yes of course !
Bug fingerprint T_T
Harry_ET said:
Bug fingerprint T_T
Click to expand...
Click to collapse
Yep. Already reported. Didn't check it since I don't use FP. Investigating.
Harry_ET said:
Bug fingerprint T_T
Click to expand...
Click to collapse
Fixed in new version.
hypeartist said:
A custom kernel based on official Xiaomi sources.
It's my first kernel ever compiled so don't judge me too hard
What's new (r1.5):
fixed fingerprint bug
added CPU input boost driver
added bfq and fiops io governors (fiops as default)
Upstreamed to the latest linux kernel sources - 4.4.164 (from the initial 4.4.78)
added СNSS WLAN Host driver (Qualcomm Atheros CLD WLAN)
overclocked audio DSP and boosted power of speaker and headphones regulators
undervolted and overclocked CPU (just a little)
[/HIDE]
That's all by now.
Suggestions and bug reports are welcome.
PS: after flashing - reflash Magisk!
Click to expand...
Click to collapse
Are I able to update my Mi 6X with TWRP if I installed Noob Kernel r1.5?
Candy_Pineapple said:
Are I able to update my Mi 6X with TWRP if I installed Noob Kernel r1.5?
Click to expand...
Click to collapse
Update to what?
hypeartist said:
Update to what?
Click to expand...
Click to collapse
When a new version of MIUI 10 stable from xiaomi.eu will be available
Candy_Pineapple said:
When a new version of MIUI 10 stable from xiaomi.eu will be available
Click to expand...
Click to collapse
Yes.
Flash new version of MIUI, then flash the kernel, then flash Magisk.
hypeartist said:
Yes.
Flash new version of MIUI, then flash the kernel, then flash Magisk.
Click to expand...
Click to collapse
Thank you for your answer ?
For miui only ?
hantux said:
For miui only ?
Click to expand...
Click to collapse
Didn't try with anything else. You may try.
Great kernel
Works well on pixel experience oreo
But d2wake not work
working on rooted stock rom?
Eyezcripz said:
working on rooted stock rom?
Click to expand...
Click to collapse
Read the OP post
after i install in twrp im stock in fastboot .. please help
Eyezcripz said:
after i install in twrp im stock in fastboot .. please help
Click to expand...
Click to collapse
Flash Magisk Installer in TWRP after flash the Kernel
---------- Post added at 12:37 PM ---------- Previous post was at 12:32 PM ----------
hypeartist said:
A custom kernel based on official Xiaomi sources.
It's my first kernel ever compiled so don't judge me too hard
What's new (r2.0):
upstreamed to Linux v4.4.165
compiled with Clang v8.0.2
fixed MTP bug
added MDSS KCAL driver
added Devfreq Boost driver
updated CPU input boost driver
...some small tweaks and clean-ups
History:
r1.0
Upstreamed to the latest linux kernel sources - 4.4.164 (from the initial 4.4.78)
Merged all CAF patches till the latest one - LA.UM.7.2.r1-05400-sdm660.0
added СNSS WLAN Host driver (Qualcomm Atheros CLD WLAN)
added Boeffla Wakelock Blocker
overclocked audio DSP and boosted power of speaker and headphones regulators
undervolted and overclocked CPU (just a little)
r1.5
fixed fingerprint bug
added DTS Eagle driver
added CPU input boost driver
added (and set as default) schedutil CPU governor
added bfq and fiops io governors (fiops as default)
...some small tweaks and clean-ups
That's all by now.
Suggestions and bug reports are welcome.
PS: after flashing - reflash Magisk!
Click to expand...
Click to collapse
In the next release can you upstream to Linux v4.9 and add Quick Charge 4 support if it's possible please
How works on MIUI 10 ??? PLEASE DETAILS
hey
can you tell me how do you fixed the mtp bug if you are interested in our developer group ping me via pm @hypeartist
thank you
Related
Aki.kernel is a kernel created by me to further enchance Grand's performance on AOSP based ROMs like CM11, AOSPA, PAC, etc.
It places emphasis on increasing performance through frandom module, SIO Scheduler and smartassv2 governor.
Ain't nobody got time for that.
Features
- Frandom support.
- ULTRA KSM
- zRAM
- Dynamic FSync
- XZ Compression
- F2FS support
- Smartassv2, Pegasusq and Adaptive governor.
- SIO Plus,VR and ROW Scheduler.
- Compiled with Linaro 4.7.4 toolchain.
-O3 Optimisation flags used. (from ver. 1.1)
- OC upto 1.5 Ghz
XDA:DevDB Information
Aki.Kernel AOSP (4.4) , Kernel for the Samsung Galaxy Grand Duos i9082
Contributors
akiratoriyama, androidbaba
Kernel Special Features: I love testing and creating stuff for myself and my fellow members. Here's a kernel for all ya flasoholics.
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 2014-05-31
Created 2014-04-18
Last Updated 2014-06-22
Reserved
Downloads
Every version of my kernel is available on AndroidFileHost
http://www.androidfilehost.com/?w=files&flid=13908
Performance control (credits @h0rn3t)
http://forum.xda-developers.com/devdb/project/?id=600#downloads
Source
https://github.com/akiratoriyama/android_kernel_samsung_i9082/
Don't expect too much.
Reserved
Changelog
Version 2.3
- Added SmartassH3 governor.
- Merged some changes from @pawitp's sources.
Version 2.2.1
- Compiled with Linaro 4.7.4
- XZ compression for small Kernel file and better performance
- Increase Max READAHEAD for better performance.
- staging: Add Snappy compression library (v3).
- Network speed increased.
- Sched Tweaks to improve performance.
Version 2.2
- Substantial performance and battery optimizations.
- Now compiled with GCC 4.6 instead of Linaro.
Version 2.1
- Dynamic FSync
Version 2.0.1
- F2FS support added.
- Fixed deletion of modules
Version 1.6
- Added SIO Plus scheduler
- Disabled Pegasusq governor for the the time being.
- Removed scsi_wait_scan.ko module
- Add RCU Boost
- Increased Entropy
Version 1.5.1
- Reduced WiFi wakelocks.
- Added Pegasusq governor.
- Added Performance Control app.
Version 1.5
- Added Ultra KSM.
Version 1.4
- Added VR and ROW scheduler.
Version 1.3
- Reverted O3 optimisations for a stable kernel.
- Added zRAM with a swapiness of 60.
- Now based on AnyKernelUpdater by Koush and modified by @CoolDevelopment.
Version 1.2
- Added adaptive governor.
- Cleaned some code and improved stability.
Version 1.1a
- Fixed FCs.
Version 1.1
- Added O3 Optimizations .
- Removed Underclocking.
Version 1.0.2
-Added Experimental Underclocking.
Version 1.0.1
- Added Experimental Overclocking.
Version 1.0
- Based on CM Defconfig.
Below Version 1.0
- Created for personal testing only
CREDITS
YOU for testing and using this kernel.
@k2wl For helping me and guiding me.
@pawitp For his kernel source.
@xenon92 For responding to a query and also used much of his Nebula Kernel code.
@TripRex For much assistance and used some of his Project Kernel code too.
@sweetnsour My primary inspiration for building a kernel
@androidbaba For extensively testing the early builds of Aki.Kernel.
@Ryuinferno for Frandom module.
@Christopher83 For his Kernel commits and also his Linaro toolchain.
@CoolDevelopment For his ver. of AnyKernelUpdater and also used some of his commits from MoshKernel.
@coldsorrow For Ultra KSM.
@h0rn3t For his Ultra-awesome Performance Control app.
@boype For his commits from Fancy Kernel.
@faux123 For Dynamic FSync.
Galaxy Grand Testers Group
Galaxy Grand Developers Group
link asking for login???
support dual sim??
made an acc thn the link specified acces denied
Download Link is asking for login.....
Log in
when
downloading
@tazo08 @supersaayuj and @mukeshpacheria
Links fixed.
akiratoriyama said:
@tazo08 and @supersayuj
Links fixed.
Dual
Click to expand...
Click to collapse
Taking a nandriod backup currently..will flash the kernel..and test it throughout the day
BTW thanks for this kernel! :good:
EDIT : Unfortunately, the process com.andriod.phone has stopped ??
Wiped dalvik cache and cache before install...on cm11 latest build..not using dual sim!
Grrt wrk buddyyy...will test and report:good:
supersaayuj said:
Download Link is asking for login.....
Click to expand...
Click to collapse
supersaayuj said:
Taking a nandriod backup currently..will flash the kernel..and test it throughout the day
BTW thanks for this kernel! :good:
EDIT : Unfortunately, the process com.andriod.phone has stopped ??
Wiped dalvik cache and cache before install...on cm11 latest build..not using dual sim!
Click to expand...
Click to collapse
Using ART ?
help plzz
supersaayuj said:
Taking a nandriod backup currently..will flash the kernel..and test it throughout the day
BTW thanks for this kernel! :good:
EDIT : Unfortunately, the process com.andriod.phone has stopped ??
Wiped dalvik cache and cache before install...on cm11 latest build..not using dual sim!
Click to expand...
Click to collapse
Which version you are trying??
Sent from my GT-I9082 using XDA Premium 4 mobile app
androidbaba said:
Which version you are trying??
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
1.1
---------- Post added at 11:23 AM ---------- Previous post was at 11:21 AM ----------
akiratoriyama said:
Using ART ?
Click to expand...
Click to collapse
NO
@supersaayuj
Use ver 1.0
akiratoriyama said:
@supersaayuj
Uploading 1.1a Hotfix version.
Click to expand...
Click to collapse
Force close is only at starting...after that it is working smooth.(till now)
Will update with further testing:good:
Anyone who is using facing FCs please use ver 1.0.1.
RIPPER said:
Force close is only at starting...after that it is working smooth.(till now)
Will update with further testing:good:
Click to expand...
Click to collapse
my all connections gone....like wifi...calls..it was in airplane mod...as u can see in the screenshot
---------- Post added at 11:52 AM ---------- Previous post was at 11:43 AM ----------
supersaayuj said:
my all connections gone....like wifi...calls..it was in airplane mod...as u can see in the screenshot
Click to expand...
Click to collapse
Not facing fc on v1.0 :laugh: :highfive:
What are the best config to use on this kernel....like ondemand..cfq ?
supersaayuj said:
my all connections gone....like wifi...calls..it was in airplane mod...as u can see in the screenshot
---------- Post added at 11:52 AM ---------- Previous post was at 11:43 AM ----------
Not facing fc on v1.0 :laugh: :highfive:
What are the best config to use on this kernel....like ondemand..cfq ?
Click to expand...
Click to collapse
Use smartassv2/interactive with 800-1200 for medium performance.
supersaayuj said:
my all connections gone....like wifi...calls..it was in airplane mod...as u can see in the screenshot
---------- Post added at 11:52 AM ---------- Previous post was at 11:43 AM ----------
Not facing fc on v1.0 :laugh: :highfive:
What are the best config to use on this kernel....like ondemand..cfq ?
Click to expand...
Click to collapse
Don't Spam..everything is working for me:good:
RIPPER said:
Don't Spam..everything is working for me:good:
Click to expand...
Click to collapse
LOOOL... i was not spamming...i know everything works for u...but not for me..so asked a little help
Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Download:
Link1
Link2
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18
How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true
Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog
Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed
can i use with ploiki's rom?
00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:
denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes
o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone
Tested new kernel with memory patches.
Just for info, work on kernel dont stop
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Will this work on I9192?
Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.
Can I use with S6 Mini Port Rom
alexax66
sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant
NOTORIOUS-KERNEL-9810
Features:
*Latest linux-stable always merged in, which ensure your device's kernel is up-to-date with latest patches. Forked from ELS starlte tree.(4.9.99 on thread creation date.)
*NK9810 support encrypted and unencrypted devices. [1]
*Changeable selinux state. (DEFAULT is Enforce and i do recommend to stick with it.)
* android-4.9 merged (latest EAS, llvm and other android related patches).
*Added BFQ-v8-v4.9, Maple, Fiops, Zen, Sio
*Enabled deadline & noop io schedulers as well.
*Wake_Gestures: sweep2wake, doubletap2wake and sweep2sleep
*Enable Dex with any HDMI adapter
*RGB, color control
*Various improvements that enhance overall system performance.
*Requires NO /system or /vendor modifications.
*TW based roms only, don't try this kernel on any AOSP rom.
If encountered by problems related to WiFi or Bluetooth:
- [STEP1]Flash stock vendor via odin then check.
- IF still having problems after doing [STEP1], which you most probably won't then try to wipe/re-install the rom or change it.
[1] IF you are on an encrypted device than you would be able to flash NK9810 and use it normally, but keep in mind that TWRP don't support encrypted /data on our devices hence why i prefer that you keep an OTG or external_sd arround just so you can update/install roms or kernels etc...
DOWNLOAD
V103 https://androidfilehost.com/?fid=5862345805528066700
Credits:
@jesec
@AndreiLux
XDA:DevDB Information
NOTORIOUS-Kernel-9810, Kernel for the Samsung Galaxy S9
Contributors
farovitus
Source Code: https://github.com/farovitus/starlte.git
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V103
Stable Release Date: 2018-08-05
Current Beta Version: 101
Beta Release Date: 2018-05-15
Created 2018-05-10
Last Updated 2018-08-08
Builds changelogs:
NK9810-V101_T
*Added Maple, Fiops, Zen, Sio
*Enabled deadline & noop io schedulers as well.
*Wake_Gestures: sweep2wake, doubletap2wake and sweep2sleep
*Enable Dex with any HDMI adapter
*RGB, color control
*Various improvements that enhance overall system performance.
Reserved
Awesome!
Great!!!!
Thank you! Is this kernel the same with the one Andrei used in his article about the analysis of 9810?
Jason_zhang said:
Thank you! Is this kernel the same with the one Andrei used in his article about the analysis of 9810?
Click to expand...
Click to collapse
No.
farovitus said:
No.
Click to expand...
Click to collapse
So can this kernel overlock the cpu?
Jason_zhang said:
So can this kernel overlock the cpu?
Click to expand...
Click to collapse
It's underclocked. Overclock is not a good idea anyway. Exynos9810 is already powerful enough, but when in use at full it's power hungry as well hence why overclock will not be supported in this kernel.
wtf i thought you wouldnt do more than the ELS updates? Great Stuff
Great to see your kernel come back to S9 too. Downloading and flashing right away. ?
Is this also for S9+???
zimmerAndy said:
Is this also for S9+???
Click to expand...
Click to collapse
It is in Cross device section, so yes it is for S9+ too
Black_Focus_X said:
It is in Cross device section, so yes it is for S9+ too
Click to expand...
Click to collapse
Ok thanks cause that would be a big bummer if dont work on star2lte so better ask and hear then flash and break the phone:good:
---------- Post added at 11:01 AM ---------- Previous post was at 10:14 AM ----------
Ok guys it worked. But i have a question how come the minimal cpu freq off big is lower then the little cores minimum???
Big=455Mhz little=650mhz??? Doesn't it be the way around or is it because i use Mtweaks app????
zimmerAndy said:
Ok thanks cause that would be a big bummer if dont work on star2lte so better ask and hear then flash and break the phone:good:
---------- Post added at 11:01 AM ---------- Previous post was at 10:14 AM ----------
Ok guys it worked. But i have a question how come the minimal cpu freq off big is lower then the little cores minimum???
Big=455Mhz little=650mhz??? Doesn't it be the way around or is it because i use Mtweaks app????
Click to expand...
Click to collapse
Kernel adiutor shows that my minimal freq of big cores is 650M, and little is 455M. Do you mistake those two?
Jason_zhang said:
Kernel adiutor shows that my minimal freq of big cores is 650M, and little is 455M. Do you mistake those two?
Click to expand...
Click to collapse
Well then it must be Mtweaks check this
t0m2k said:
wtf i thought you wouldnt do more than the ELS updates? Great Stuff
Click to expand...
Click to collapse
Got the device and here we are
farovitus said:
Got the device and here we are
Click to expand...
Click to collapse
I got the same readings with kernel auditor too
Any idea on this OP??? Farovitus???
My device is 965F/DS s9+
zimmerAndy said:
I got the same readings with kernel auditor too
Any idea on this OP???
Click to expand...
Click to collapse
Seems there is something wrong with mtweaks, cpu freqs tables are inverted indeed, report this issue the mtweaks dev please.
farovitus said:
Seems there is something wrong with mtweaks, cpu freqs tables are inverted indeed, report this issue the mtweaks dev please.
Click to expand...
Click to collapse
But it is also with kernel auditor?? May i ask witch app u use to check???
Hybrid kernel is designed to increase performance, improve battery efficiency and improve security than stock Kernel. Combined some goodies from CAF, Linux-stable, Google common kernel and other well-known Android kernels.
Before flashing, please make sure you have an unlocked bootloader.
Supported devices:
ATU-L11
ATU-L21
ATU-L22
ATU-L31
ATU-L42
Before you flash, have a backup of our current kernel. Follow my guide here.
How to flash?
If you don't have a twrp yet, download twrp.img from the download link and copy it to your computer. Backup your current recovery by following this guide. Flash twrp using this command on your computer:
Code:
adb reboot bootloader
fastboot flash recovery_ramdisk twrp.img
If you already have twrp, download the kernel zip file and copy it to either external sdcard or to /cache. This is because twrp can't properly see internal storage as it is encrypted
Please use Kernel Adiutor from Play Store if you want to customize the kernel settings
Credits:
@nathanchance
@Sultanxda
@arter97
@franciscofranco
@Lord Boeffla
@eng.stk
Do you like my work? Perhaps you may want to consider donating?
Downloads:
https://drive.google.com/folderview?id=1JMYI66HVK6MxmJUYlBDJXt5Gb2vOfALf
Source code: https://github.com/pascua28/android_kernel_msm8917_ATU
Features:
Latest Linux-stable updates
Latest CAF msm-3.18
Upstream CFQ changes
Compiled with Snapdragon LLVM and Ubertc GCC 7.x Linaro GCC 7.x with O3 optimizations
Clarity, blu_active, Alucard, darkness, nightmare CPU governors
Zen, maple, sio, fiops, vr, sio, sio plus, tripndroid, cfq I/O schedulers
Voltage control
Adreno IDLER
KCAL Color Settings
Overclocked GPU upto 650MHz
Overclocked ISP
Boeffla wake lock blocker
Quick power on driver
LZ4 zcache
arm64-accelerated crypto algorithms
CRNG based random driver
Fast random driver
Power-efficient workqueues
USB Fast Charge
Updated RCU to Linux 4.4
Updated zsmalloc, zbud, zpool, zswap and zram to Linux 4.4
Reserved
Reserved
Will try this now I will report later after flashing this kernel
Just getting bootloop
sh0w 0f said:
Just getting bootloop
Click to expand...
Click to collapse
Are you on stock rom?
pascua28 said:
Are you on stock rom?
Click to expand...
Click to collapse
Yes I was on stock ROM but now I'm in Crdroid os
sh0w 0f said:
Yes I was on stock ROM but now I'm in Crdroid os
Click to expand...
Click to collapse
Crdroid? There is still no Crdroid rom for Y6 2018 version. Are you sure your device is listed in the first post?
Works fine, good performance, no battery drain and well written code, thanks for bringing it to us!
Best regards, iDecrypt
waiting for the gapps and su version.
nafis5566 said:
waiting for the gapps and su version.
Click to expand...
Click to collapse
It's a Kernel not a Rom
iDecrypt said:
It's a Kernel not a Rom
Click to expand...
Click to collapse
Extremely sorry was going to comment on lineage os section but accidently posted here.
kernel huawei y6 prime 2018
Just getting bootloop
_OldFox said:
Just getting bootloop
Click to expand...
Click to collapse
What model?
ATU-L31
_OldFox said:
ATU-L31
Click to expand...
Click to collapse
Did you update your phone to 8.0.0.142?
No. I have 8.0.0.130(C432).
_OldFox said:
No. I have 8.0.0.130(C432).
Click to expand...
Click to collapse
Could you try updating? And also, can you send me the kernel image backup? The kernel image is based on 8.0.0.140. Meanwhile, I'll just remove ATU-L31 from supported devices until I upload a separate file for it. Sorry for the inconvenience caused.
Bootloop on version 142
Why LoverOriented?
There are many programming language which are object-oriented. In Chinese, the pronunciation of "object" is same as "lover", which is more than just a pun. And a tease that a programmer with a girlfriend .
Note: This is not a kernel with a lot of "useless" features, I will only keep those features that really help for our devices. So you just need flash and enjoy, in general, you don't need to use the kernel controll app to care about the configuration of kernel.
Features:
Based on latest caf pie tag with latest upstream merged
Really much optimized to boost battery and performance for your phone
Full EAS supported with sultan's boost
Build with custom gcc-8.2.1 with cpu-specific optimization
QC3.0 Fast charging (Depending on thermal of your rom)
Doubletap2wake
KCAL Advanced color control
Sound control
Underclock CPU/GPU(CPU mix 175mhz and GPU mix 171mhz)
Undervoltage CPU
Wakelock blocker(already disabled some useless by default)
Adjust or disable vibration
Maple i/o schedulers
Westwood tcp congestion algorithm with many tcp fix from upsteam
Zram support with latest upstream lz4 compression algorithm
NTFS r/w, CIFS and NFS support
Performance and power optimizations
FS fsync toggle on/off
sultan's simple android lmk
File system optimization
Improved sound quality, forced use of high resolution to output
Disabled many debug which are useless for users and keep it clean
AND MUCH MORE
Download:
https://drive.google.com/folderview?id=14U-iwdOskukS8RAkGeBTTsgTL5nP8VsU
Source:
https://github.com/wloot/LoverOriented
DD
I like this.
Awesome, LIUNIAN, study hard! Haha
compatible with MIUI?
SnajperKRS said:
compatible with MIUI?
Click to expand...
Click to collapse
for pie only
Gib us Chiron one God wloot
a test version with f2fs support.
tell me if it works
https://drive.google.com/file/d/1fIvC3cuz-_-JSM8ejaxr2CVIHLaLeoFF/view?usp=drivesdk
AleD219 said:
Gib us Chiron one God wloot
Click to expand...
Click to collapse
build-able and Ultrasound must be broken lol
wloot said:
build-able and Ultrasound must be broken lol
Click to expand...
Click to collapse
Sad
Thank you. :highfive:
i have a problem with this kernel, so i moved to Vantom kernel
sometimes when i push the power button the screen remains black but the hardware buttons are lit, then i press the power button again i try after few seconds its ok, i faced this problem 7 times in 30 minutes
Is F2FS supported?
ulev said:
Is F2FS supported?
Click to expand...
Click to collapse
check the first page. There is a beta 1.5 version with F2FS support
E2sembler said:
check the first page. There is a beta 1.5 version with F2FS support
Click to expand...
Click to collapse
Thanks. I must have been blind...
Hello, can you add interactive original scheduling back to the kernel? If so, could you please send me a copy? Thank you. And in the process of using the ROM you compiled, the frequency of this kernel is 175mhz, but the frequency of ROM kernel is 300mhz. I hope you to change it to 175mhz,
The Kernel works with Pie ROMs only?
A Bug:Can't charge on shutdown
Nice kernel and thanks
Worked with 7.1.1 miui, but wifi does not working
Anyone using this kernel on pe unofficial?