Hi,
Anyone else noticed that the media in headphones sounds much lower since updated to Pie? (didn't try on bluetooth)
In Oreo it was really higher... any solution?
Thanks!
jdhelman said:
Hi,
Anyone else noticed that the media in headphones sounds much lower since updated to Pie? (didn't try on bluetooth)
In Oreo it was really higher... any solution?
Thaks!
Click to expand...
Click to collapse
Same here.
Me too, tested on any music/video app.
jdhelman said:
Hi,
Anyone else noticed that the media in headphones sounds much lower since updated to Pie? (didn't try on bluetooth)
In Oreo it was really higher... any solution?
Thaks!
Click to expand...
Click to collapse
My volume has always been low. I use the audio enhancer in the audio options to get better and louder audio.
Pie update care about our ears health
Same here
Same here I reported it in the Mi Feedback app though
---------- Post added at 07:56 PM ---------- Previous post was at 07:56 PM ----------
And finally now its confirmed its a change/issue with the update and my headphones are fine ?
S /\ E E D said:
Pie update care about our ears health
Click to expand...
Click to collapse
i really care about my ears.... but listeners like me really... that listen very old songs recorded or remastered with low sound levels, like to control yours own volume level.........the sound in oreo was fantastic and l listen old and new songs without get the MAX volume level....... but now i put it at max and sounds like a worst european 90's portable cd player that had max 1.5mW output..... the sound gets a very little enhance. from v 10.0.1.0 to 10.0.2.0 that i've install yesterday.......
Ant solution ?
Cocagy said:
Ant solution ?
Click to expand...
Click to collapse
Hex Kernel.
MiguelAngelC said:
Hex Kernel.
Click to expand...
Click to collapse
Then which part i should edit ?
guys any help here , when i was on oreo audio quality was good but after installing pie audio quality very bad also it's lower than before
Cocagy said:
Then which part i should edit ?
Click to expand...
Click to collapse
just install, also Ainur JamesDSP improves.
Same here after update to Pie i got lower sound in my headphones, i'm using Bluetooth headphones and cannot use sound enhancer no Bluetooth support for it.
PS Also i have problem with my WiFi, usually i''m listening radio at work and now i'm losing WiFi signal in the same spot using it before Pie [Oreo] and change to mobile data after a few minutes.
Any help pls !?
TnkU.
It's because for eu countries is set to 72 at the mixerpath.xml file in system folder. There is no way to edit it and save it with root. After reboot it reverts back to stock values. But there is a working magisk module that sets the values to 88. It's working great but of course you'll need magisk. You will find it under themes apps mods section
Sent from my Mi A2 using Tapatalk
Hope someone find something to increase the Bluetooth volume cause it's a very low
Enviado desde mi Mi A2 mediante Tapatalk
Sp_Ark said:
It's because for eu countries is set to 72 at the mixerpath.xml file in system folder. There is no way to edit it and save it with root. After reboot it reverts back to stock values. But there is a working magisk module that sets the values to 88. It's working great but of course you'll need magisk. You will find it under themes apps mods section
Click to expand...
Click to collapse
Do you have a link? Or perhaps name if the module is present in magisk repo?
kvsjxd said:
Do you have a link? Or perhaps name if the module is present in magisk repo?
Click to expand...
Click to collapse
https://r.tapatalk.com/shareLink?ur...share_tid=3886008&share_fid=3793&share_type=t
Sent from my Mi A2 using Tapatalk
Sp_Ark said:
https://r.tapatalk.com/shareLink?ur...share_tid=3886008&share_fid=3793&share_type=t
Click to expand...
Click to collapse
Thank you so much
Sp_Ark said:
https://r.tapatalk.com/shareLink?ur...share_tid=3886008&share_fid=3793&share_type=t
Sent from my Mi A2 using Tapatalk
Click to expand...
Click to collapse
Hi, there are also other modules in different posts in this thread? We need only that in first post?
Related
* This equalizer will NOT run without headphone plugged in.
* Tested on:
CM12S
OxygenOs
smartisanOs 4.4
CM12.1 Nightly
HydrogenOS
Not working on:
Exodus 5.1
To install, copy the 'com.lewa.tuningmaster-1' to /system/app, change folders to RWX-RX-RX and apk to RW-R-R, then reboot the phone. Or flash the flashable zip below.
After reboot, an application called 'Tuning Master' will show up.
As what you can see here, the installation process doesn't replace/modify any of your system files, which means it can be uninstalled by simply removing the folders and might live along with your others audio mod just fine.
Flashable Zip
Original Link:http://www.oneplusbbs.com/thread-778028-1-1.html
Thanks for sharing !
It works too on HydrogenOS (see screenshots on the original thread )
Seems to work on 5.1 nightlies aswell, you only have to flash the Maxx audio AudioFX app standalone first for it to work!
Seems cool but, could you make it a flasheable, please.
+1 for flashable wanna test it
anyone tried this on kitkat? I have, but dont notice any changes...might be doing something wrong. will love to try the flashable zip.
Sent from my OnePlus using Tapatalk
here you go
etoy said:
here you go
Click to expand...
Click to collapse
Thanks this is now my favourite sound mod...working for me on smartisanOs android 4.4
Sent from my OnePlus using Tapatalk
Is this mod completely reversible just in case?
etoy said:
here you go
Click to expand...
Click to collapse
Do I need to uninstall or disable audioFX (maxxaudio)?
Thanks!
razielmcr said:
Do I need to uninstall or disable audioFX (maxxaudio)?
Thanks!
Click to expand...
Click to collapse
Wondering the same. Don't want to mess something up since I use my phone for playing audio every single day.
Prezes5 said:
Wondering the same. Don't want to mess something up since I use my phone for playing audio every single day.
Click to expand...
Click to collapse
If something happens you can always flash back maxxaudio
Prezes5 said:
Wondering the same. Don't want to mess something up since I use my phone for playing audio every single day.
Click to expand...
Click to collapse
It's a standalone app which doesnt replace any of your system files. Im running it with default audiofx(maxxaudio) on cm12s
Not working on exodus 5.1
ImbaWind said:
It's a standalone app which doesnt replace any of your system files. Im running it with default audiofx(maxxaudio) on cm12s
Click to expand...
Click to collapse
Thanks for clarifying that. I am running cm12 as well and standalone app sound great. Nothing to mess up :laugh::good:
---------- Post added at 03:55 PM ---------- Previous post was at 03:13 PM ----------
Installed. Really cool interface and easy installation. Did not feel a difference in sound though. Does it only work on certain apps or anytime headphones are plugged in? Tried disabling the apps equalizer and setting up the type of headphones used, but still no noticeable difference.
Prezes5 said:
Thanks for clarifying that. I am running cm12 as well and standalone app sound great. Nothing to mess up :laugh::good:
---------- Post added at 03:55 PM ---------- Previous post was at 03:13 PM ----------
Installed. Really cool interface and easy installation. Did not feel a difference in sound though. Does it only work on certain apps or anytime headphones are plugged in? Tried disabling the apps equalizer and setting up the type of headphones used, but still no noticeable difference.
Click to expand...
Click to collapse
For me it works in Play Music and Spotify, you can know what it's working just by chging the preset in the statusbar notification without going into the app, really handy.
But it doesn't work for games
ImbaWind said:
For me it works in Play Music and Spotify, you can know what it's working just by chging the preset in the statusbar notification without going into the app, really handy.
But it doesn't work for games
Click to expand...
Click to collapse
Gotcha, I usually use music folder player(blue icon) or aimp(yellow).
I do use spotify so I might try it out later today. Yea the interface of the app on the status bar or in app looks really cool :good:
Prezes5 said:
Gotcha, I usually use music folder player(blue icon) or aimp(yellow).
I do use spotify so I might try it out later today. Yea the interface of the app on the status bar or in app looks really cool :good:
Click to expand...
Click to collapse
And I found that this app works on top on maxxaudio, for me I disabled maxxaudio so that maxxaudio effect wont kick in
ImbaWind said:
And I found that this app works on top on maxxaudio, for me I disabled maxxaudio so that maxxaudio effect wont kick in
Click to expand...
Click to collapse
Yea I already had maxxaudio disabled figuring it would be on twice. I can report back with feedback about google "play music" and "spotify". I really like the "live" preset. Seems to add more life into the music. Music folder player already has a great equalizer so it's not a big deal it's not supported. Great organized player with awesome equalizer if anyone is searching for a new music player.
Bro can u port this for marshmallow as it is working perfectly in cm12.1 ROM but after marshmallow update it gets force stop. So please port for marshmallow users
Hi to all ...is there any chance to find a mod that increase the sound of headset?even some apk or a mod to flash from recovery?
Dolby Atmos.
How to use it?where to find it?
E
mihairimia said:
Dolby Atmos.
Click to expand...
Click to collapse
Lol. I had to Google it and it's cool and all but no way is it related to the P9.
Sent from my EVA-L19 using XDA-Developers mobile app
I'd be keen to hear what if anything peole are using.
Sounds far too tinny standard.
Standard headphone sound can be EQ'd in poweramp to sound ok, but really lacks volume by the time I've toned down the awefull piercing trebble, and boosted lower frequencies.
Is there a hidden setting somewhere like on other phones to turn off the low volume safety feature?
Or is the audio hardware in the phone just not very good?
Check this : http://forum.xda-developers.com/p9/themes/dolby-atmos-huawei-p9-t3406574
I use it and the sound is very loud.
Viper4android V4A
Sent from my EVA using XDA-Developers mobile app
Works for me ...thanks for dolby atmos
Does this need root? I stull want to get OTA updates, how do you install, thanks
Greasedferret said:
Does this need root? I stull want to get OTA updates, how do you install, thanks
Click to expand...
Click to collapse
Yeap...needs root and twrp ...and no you cant get updates ota ...you need to find the right update in zip file and install it from recovery..twrp
Ok thank you. Thats a shame.
Hi everyone
I'm using a Xiaomi mi mix 2 with last stable xiaomi.eu rom. It looks like MIUI has a problem with handling Bluetooth codecs with certain car radios. With Pioneer radios, the phone automatically sets codec to AAC, but no media sound is transmitted.
When I choose SBC codec, everything is fine. The thing is MIUI changes it back to AAC each connection.
(Actually AAC works fine with my other phone OP5T, I guess AAC is broken with MIUI Oreo)
Would it be possible with Tasker to force Bluetooth codec to set to SBC ? If yes, I would be grateful if someone could explain how.
I would say, the best would be someone who could write a little Tasker app which does it for me when I press the shortcut for instance.
Thanks!
morback said:
Hi everyone
I'm using a Xiaomi mi mix 2 with last stable xiaomi.eu rom. It looks like MIUI has a problem with handling Bluetooth codecs with certain car radios. With Pioneer radios, the phone automatically sets codec to AAC, but no media sound is transmitted.
When I choose SBC codec, everything is fine. The thing is MIUI changes it back to AAC each connection.
(Actually AAC works fine with my other phone OP5T, I guess AAC is broken with MIUI Oreo)
Would it be possible with Tasker to force Bluetooth codec to set to SBC ? If yes, I would be grateful if someone could explain how.
I would say, the best would be someone who could write a little Tasker app which does it for me when I press the shortcut for instance.
Thanks!
Click to expand...
Click to collapse
You probably need to change a setting, Secure Task can handle this with the Secure Settings option.
It's going to be device dependent so you'll need to do it yourself (see screenshot). Read the settings first, then change the codec, and then read it again, so you can see exactly what you want to change to.
Either check my comment over here involving root permission and editing of the build.prop file.
Or upgrade to MIUI 10
rtk217 said:
Either check my comment over here involving root permission and editing of the build.prop file.
Or upgrade to MIUI 10
Click to expand...
Click to collapse
This
Thank you so much. I will try it asap. But I'm sure it will work. I have to wait for the stable Xiaomi.eu release of MIUI 10 begause it's my girlfriend's phone and I don't want to flash beta releases on it. Root is ok though, it allows to block ads.
morback said:
This
Thank you so much. I will try it asap. But I'm sure it will work. I have to wait for the stable Xiaomi.eu release of MIUI 10 begause it's my girlfriend's phone and I don't want to flash beta releases on it. Root is ok though, it allows to block ads.
Click to expand...
Click to collapse
I know, that the problem still persists in the MIUI 10 Beta (Tested with Mi Mix 2s)
gkon said:
I know, that the problem still persists in the MIUI 10 Beta (Tested with Mi Mix 2s)
Click to expand...
Click to collapse
Seriously.... Then I'll have to modify the build.prop file again...
morback said:
Seriously.... Then I'll have to modify the build.prop file again...
Click to expand...
Click to collapse
Sorry, I forgot to write it is in the Global Version, and I got the Information from a Facebook member, my device is a Redmi Note 5.
I've seen that the build.prop for my device is different from the Mi6, described by rtk217, I don't know how to change this file, maybe someone can help me?
Im having trouble with the Dolby app, when I active dolby the sond decreases about 15-20% and with headphones you can change the EQ 3notches.
It also changes the default EQ in Google music for example to the Dolby version were you cant increase the bass in the EQ. Is the some workaround for this? Or does anyone else experience the same thing?
Best reegards Pierre Gothenburg Sweden
Switch off volume leveller if on. In my case with the option on it lowered Bluetooth audio streaming considerably...
I personally installed ViPER4Android and totally switched off Dolby, since I find V4A much more enhanced and can be fine tuned to one's liking. Problem is that while streaming through Bluetooth, it's really inconsistent and sometimes it works, sometimes it doesn't. But if you're mainly using a wired headset, I suggest you give it a go...
Yes I understand, but I just got it dosen't jag want to root it yet! Viper is one of the best things along with xposed to Android(vanilla of course) but I hope someone can remove the restrictions for headphones in the Dolby app, if I coymuld I would. Best reegards Pierre Gothenburg Sweden det
krilok said:
Switch off volume leveller if on. In my case with the option on it lowered Bluetooth audio streaming considerably...
I personally installed ViPER4Android and totally switched off Dolby, since I find V4A much more enhanced and can be fine tuned to one's liking. Problem is that while streaming through Bluetooth, it's really inconsistent and sometimes it works, sometimes it doesn't. But if you're mainly using a wired headset, I suggest you give it a go...
Click to expand...
Click to collapse
But this is when use headset with cable, havent even tried bluetooth headset.
pierre.hellner said:
Yes I understand, but I just got it dosen't jag want to root it yet! Viper is one of the best things along with xposed to Android(vanilla of course) but I hope someone can remove the restrictions for headphones in the Dolby app, if I coymuld I would. Best reegards Pierre Gothenburg Sweden det
Click to expand...
Click to collapse
Dolby itself is not the problem but did you attempt to turn off volume leveling or not?
xposed is nice but there are much better options out there. To my knowledge xposed still reverts art back to dalvik and decreases performance quite considerably imo.
You can either try volume boosting apps on the play store or you have to root. If rooted you can either use Viper, or modify system file (mixer something xml - I forgot the name of the file) to boost the volume.
Just because the device is new doesn't really factor in to if you should root or not, imo, unless the root solution is not stable which is not the case here. You can always unroot later and if for some reason you reach a point where you can't uninstal root, you can attempt to send the device back to Moto and hope you get a replacement.
Sent from my moto g(6) plus using Tapatalk
Xplorer4x4 said:
Dolby itself is not the problem but did you attempt to turn off volume leveling or not?
xposed is nice but there are much better options out there. To my knowledge xposed still reverts art back to dalvik and decreases performance quite considerably imo.
You can either try volume boosting apps on the play store or you have to root. If rooted you can either use Viper, or modify system file (mixer something xml - I forgot the name of the file) to boost the volume.
Just because the device is new doesn't really factor in to if you should root or not, imo, unless the root solution is not stable which is not the case here. You can always unroot later and if for some reason you reach a point where you can't uninstal root, you can attempt to send the device back to Moto and hope you get a replacement. [/QUOTE
Where can I find the volume level of do you meannboost THE volume? Iwant tog be anledning tobuse THE EQ fullt with My headphones with cable as it complains about security reasons when headphones är plugged in.
Click to expand...
Click to collapse
pierre.hellner said:
Xplorer4x4 said:
Dolby itself is not the problem but did you attempt to turn off volume leveling or not?
xposed is nice but there are much better options out there. To my knowledge xposed still reverts art back to dalvik and decreases performance quite considerably imo.
You can either try volume boosting apps on the play store or you have to root. If rooted you can either use Viper, or modify system file (mixer something xml - I forgot the name of the file) to boost the volume.
Just because the device is new doesn't really factor in to if you should root or not, imo, unless the root solution is not stable which is not the case here. You can always unroot later and if for some reason you reach a point where you can't uninstal root, you can attempt to send the device back to Moto and hope you get a replacement. [/QUOTE
Where can I find the volume level of do you meannboost THE volume? Iwant tog be anledning tobuse THE EQ fullt with My headphones with cable as it complains about security reasons when headphones är plugged in.
Click to expand...
Click to collapse
If by "it complains" you mean the warning you get when you raise the volume too much, it's there on purpose to avoid damage to your ears. If I'm not mistaken, the only way to disable that is through root and xposed...
Click to expand...
Click to collapse
krilok said:
pierre.hellner said:
If by "it complains" you mean the warning you get when you raise the volume too much, it's there on purpose to avoid damage to your ears. If I'm not mistaken, the only way to disable that is through root and xposed...
Click to expand...
Click to collapse
NO I mean that its a restriction in hos much you can change The EQ, it says Sue to security you cant raise the EQ more Ryan 3db,and I know that dB is sund, but The volume is way luder and you can smide The bass slider to max without headphones. I use a-jays 5.
Click to expand...
Click to collapse
pierre.hellner said:
krilok said:
NO I mean that its a restriction in hos much you can change The EQ, it says Sue to security you cant raise the EQ more Ryan 3db,and I know that dB is sund, but The volume is way luder and you can smide The bass slider to max without headphones. I use a-jays 5.
Click to expand...
Click to collapse
All restrictions are to avoid damage to your ears, that's why you can change things to higher values on speakers but not on headphones... You would have to root to have full control over this.
Click to expand...
Click to collapse
krilok said:
pierre.hellner said:
All restrictions are to avoid damage to your ears, that's why you can change things to higher values on speakers but not on headphones... You would have to root to have full control over this.
Click to expand...
Click to collapse
But even if I root isn'it The same thing as just crank up the gain or master volume or what the name is? And as someone sad Viper is Great but it runs under dalvik and not art and didnt recommend it, I dont Now if its True, you can fid it in The thread. . Best reegards Pierre
Click to expand...
Click to collapse
pierre.hellner said:
krilok said:
But even if I root isn'it The same thing as just crank up the gain or master volume or what the name is? And as someone sad Viper is Great but it runs under dalvik and not art and didnt recommend it, I dont Now if its True, you can fid it in The thread. . Best reegards Pierre
Click to expand...
Click to collapse
You can do several things with and without root:
No root: disable headset limitations guide - https://www.google.com/amp/s/www.**********.com/disable-safe-volume-warning-no-root-required/amp/
With root: Install V4A app and set it up to your liking, or don't and just use Dolby but disable limitations with an xposed module. You can find several guides on XDA or through Google.
As for V4A working with Art or Dalvik, I'm no expert and don't understand what difference this may make regarding audio quality, but I can tell you V4A works perfectly fine with a headset on my G6+, as well as on several of my other older devices, too. Only issue is Bluetooth streaming which sometimes works and sometimes doesn't, depending on which audio device you're connecting to, but I can live with that...
Edit: the stars in the link I posted should read '**********'...
Edit 2: XDA app keeps removing the word... It should say d r o i d v i e w s without the spaces...
Click to expand...
Click to collapse
krilok said:
pierre.hellner said:
You can do several things with and without root:
No root: disable headset limitations guide - https://www.google.com/amp/s/www.**********.com/disable-safe-volume-warning-no-root-required/amp/
With root: Install V4A app and set it up to your liking, or don't and just use Dolby but disable limitations with an xposed module. You can find several guides on XDA or through Google.
As for V4A working with Art or Dalvik, I'm no expert and don't understand what difference this may make regarding audio quality, but I can tell you V4A works perfectly fine with a headset on my G6+, as well as on several of my other older devices, too. Only issue is Bluetooth streaming which sometimes works and sometimes doesn't, depending on which audio device you're connecting to, but I can live with that...
Edit: the stars in the link I posted should read '**********'...
Edit 2: XDA app keeps removing the word... It should say d r o i d v i e w s without the spaces...
Click to expand...
Click to collapse
Sorry, but The link dont work, 404 page can not be fond. Jeep coming with tips I wony root until The update that fixes The audio issues, they are well know in The Moto G6 forum and its Co. Inga soon, probably with Android 9 or if they pusha 8.q with fixes fors. Android 9 is confirmed. Sorry for autocorrection somtimes, I dont always notice it my self. Best reegards Pierre Gothenburg Sweden
Click to expand...
Click to collapse
krilok said:
pierre.hellner said:
You can do several things with and without root:
No root: disable headset limitations guide - https://www.google.com/amp/s/www.**********.com/disable-safe-volume-warning-no-root-required/amp/
With root: Install V4A app and set it up to your liking, or don't and just use Dolby but disable limitations with an xposed module. You can find several guides on XDA or through Google.
As for V4A working with Art or Dalvik, I'm no expert and don't understand what difference this may make regarding audio quality, but I can tell you V4A works perfectly fine with a headset on my G6+, as well as on several of my other older devices, too. Only issue is Bluetooth streaming which sometimes works and sometimes doesn't, depending on which audio device you're connecting to, but I can live with that...
Edit: the stars in the link I posted should read '**********'...
Edit 2: XDA app keeps removing the word... It should say d r o i d v i e w s without the spaces...
Click to expand...
Click to collapse
Can you send me a pm with the adress, i cant seem to get it to work. Thanks, this is what I love with this forum. There is always someone that knows more than myself?
Click to expand...
Click to collapse
pierre.hellner said:
krilok said:
Can you send me a pm with the adress, i cant seem to get it to work. Thanks, this is what I love with this forum. There is always someone that knows more than myself?
Click to expand...
Click to collapse
Thanks for your time and knowledge, I couldn't find a good way to bypass this exept disabling it! I fond another EQ and cant say that I hear ny difference. Maybe in The movie mod, but I'll finetune it so you cant hear any difference. At least not in my A-jays 5 or my Bluetooth headset, but I prefer The A-jays 5 beacase of the sound and it dosen't drain my battery (Bluetooth))!
Click to expand...
Click to collapse
krilok said:
pierre.hellner said:
You can do several things with and without root:
No root: disable headset limitations guide - https://www.google.com/amp/s/www.**********.com/disable-safe-volume-warning-no-root-required/amp/
With root: Install V4A app and set it up to your liking, or don't and just use Dolby but disable limitations with an xposed module. You can find several guides on XDA or through Google.
As for V4A working with Art or Dalvik, I'm no expert and don't understand what difference this may make regarding audio quality, but I can tell you V4A works perfectly fine with a headset on my G6+, as well as on several of my other older devices, too. Only issue is Bluetooth streaming which sometimes works and sometimes doesn't, depending on which audio device you're connecting to, but I can live with that...
Edit: the stars in the link I posted should read '**********'...
Edit 2: XDA app keeps removing the word... It should say d r o i d v i e w s without the spaces...
Click to expand...
Click to collapse
Just in case you're wondering, that domain is filtered from XDA for constantly and shamelessly copying content from the XDA Portal.
Click to expand...
Click to collapse
MishaalRahman said:
krilok said:
Just in case you're wondering, that domain is filtered from XDA for constantly and shamelessly copying content from the XDA Portal.
Click to expand...
Click to collapse
Didn't know that, just linked it because it was the first tutorial I found when I Googled... ?
Click to expand...
Click to collapse
Any option to separate sound like samsung device. Example i play game and music, but the priority sound is music. Sound volume in game and music can change with volume botton. Anyone know how to add that feature in mi 8?
https://www.xda-developers.com/app-volume-control-individual-volume-levels-android/
Try this.
ranggi said:
Any option to separate sound like samsung device. Example i play game and music, but the priority sound is music. Sound volume in game and music can change with volume botton. Anyone know how to add that feature in mi 8?
Click to expand...
Click to collapse
Xiaomi.EU has this feature built in.
tsongming said:
Xiaomi.EU has this feature built in.
Click to expand...
Click to collapse
Iam in eu miui 12 now. Where is the separate sound?
ranggi said:
Iam in eu miui 12 now. Where is the separate sound?
Click to expand...
Click to collapse
In sound settings, see screenshots. Unless you were talking about something else.
If that isn't what you are wanting you could try using an app called ultra volume which has nice Gui options in addition to additional settings for sound.