Hi, when I connect to AA it disabled my bluetooth audio so I cant play any audio books over it.
Is there any workaround for this?
Stephan
In the Bluetooth Settings, go to the setting related to car blutooth, Enable Media Audio. you have to enable similar setting in car bluetooth Settings.
Akram. said:
In the Bluetooth Settings, go to the setting related to car blutooth, Enable Media Audio. you have to enable similar setting in car bluetooth Settings.
Click to expand...
Click to collapse
These settings are disabled when connected to AA. Even worth is that even phone audio doesnt work anymore.
Thats seems like an odd limitation.
Stephan
I have been wanting to put my head through a window for this exact issue. I recently moved from an iPhone to a oneplus 6t and I am really starting to miss carplay. I have an AVIAN USA head unit in my BMW and I need to use Bluetooth so my audio and searing wheel controls work but every time I plug my phone in I lose audio. It seems like controls still work though as I can change songs but I get no audio. I've tried disabling audio routing over USB in dev settings and repairing my bt while android auto is running. I've also tested this with a note 9 and had the same issues. I have tried to put in a help ticket with google but not heard back.
Related
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Sounds to me like it's an issue with the stereo, not the Kaiser.
Perhaps try disabling the handsfree service (for that pair) on the Kaiser? I can't remember exactly if you disable certain services.
cotc2001 said:
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Click to expand...
Click to collapse
I have an XCarLink and I have the same behaviour which is a bit annoying. I did a bit of searching a while ago but never got anywhere. If there is an (easy) answer to this I would be interested.
Andy
No it's def not the stereo , i've got it working sort of using A2DP toggle but it's not automatic.
Installed A2DP toggle and linked it to the audio manager on the kaiser.
So I just click the play button on my home screen and it kicks in the wireless stereo and launches the audio manager at the same time and it all works.
It's just annoying as I know that before I moved the stereo from my Honda civic to my hyundai Coupe all I had to do was just start audio manager and the wireless stereo kicked in automatically.
I've seen this too; I have a Sony BT5000 (basically the same as the OP), and I've seen it with both Wizard & Kaiser devices.
A bit more testing - expected behaviour?
I went out in the car earlier and had to do the 'set as wireless stereo' trick to get the BT streaming working with the XCarLink. When I switched off the engine and the head unit powered off the headset icon disappeared from the phone (which is normal) indicating there was no connection. I then left the car but left the bluetooth enabled on the phone instead of switching it off as I normally do. When I returned and drove off the partnership was re-established and the headset icon re-appeared and I was able to stream music etc without doing the 'set as wireless stereo' trick.
I tested this a couple of times and the behaviour was the same - i.e. leave BT enabled on the phone but switch on/off the XCarLink (car kit) and the partnership re-establishes each time with Wireless Stereo working. Switch BT off and then back on on the phone and you have to manually select Wireless Stereo.
Is this the expected behaviour or is there a trick to getting this working seamlessly?
Andy
That didnt' work for me. I even did a hard reset on my phone to see if there was something I had installed causing it not to relink.
If I had any hair, i'd be pulling it out by now
It's so frustrating knowing that I had worked it out once before but when it comes to the crunch you can't remember for the life of you how you did it.
Well i've been searching for an answer and found this here
http://forum.xda-developers.com/showthread.php?p=1318542#post1320648
@ debully>
There is a very simple fix to enable the Pioneer to recognise and connect to your phone. You see the Pioneer is searching for a phone or a Smartphone, the Trinity identifies itself as a PPC and so the Pioneer ignores it.
The Class of Device or CoD must be changed so that the Trinity identifies itself as either a phone or Smartphone.
If you change the Dword Data value in.... HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD"
to 5374476 (decimal) and set bluetooth to discoverable in your Trin, you should find that it connects automatically.
It took me 8 months to find this out.
PS. I don't have the problem with not hearing the callers.
Click to expand...
Click to collapse
But it didn't work for me - on the plus side though I did find a really cool mortscript from the same guy which when I plug the kaiser into my car cradle/charger it recognises the car stereo (but doesn't set to "wireless stereo" and automatically loads up my media player
My search continues
EDIT: Ok found that once the initial partnership for wireless stereo is done, if I turn off the radio and turn it back on again, the partnership is lost as usual until I press channel 6 (pause) on my head unit and then it comes back on.
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I think the answer lies in the question here,, Parrot Bluetooth Media Connection.
The stereo isn't 'smart' enough to determine that what is connecting to it is a Phone/MP3 and as such you wont be able to split the audio to have the phone play music and the Stereo take calls, it'll end up being one over the other.
One way around this would be to test with a completely different Bluetooth Headset to see if this allows music to be played on the Device and Calls to come through on the Headset,, failing that its going to have to be a potential dev jobby to split how the device sends its audio and to what specific device,,, if that lies with HTC and Android/Us or Pioneer/Parrot themselves,, might be worth asking whats the official standpoint on this with the Manufacturer and see if they are getting this same issue from multiple folks
uConnect and Bluetooth Media
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I have the same problem with my HTC One across four different ROMs, two GE and two Sense.
It's NOT an issue with my car stereo (uConnect system) as it works flawlessly on my Nexus 7 and VZW Galaxy Nexus. I prefer to have media (music, Ingress etc...) play over the phone. Only thing I want to play over the uConnect is the actual phone. No matter how many times I unselect media in the bluetooth settings it selects it again.
I see this is an old thread, anyone have any ideas?
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
deadman3000 said:
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
Click to expand...
Click to collapse
I've just installed Bluetooth Auto Connect have to go run some errands in a little while, I'll let you know if it helps out managing profiles or not.
If it works let me know what settings you used as I don't understand all the options lol.
bluetooth problem
Hi developers: Thanks Team Venom for a great ROM. I have only one problem. Rom 2.7 no problem with Bluetooth in the car. 3.1 Installation of clean and dirty disables bluetooth. Ten seconds connected and then disconnected. Again, connects and disconnects. So it all over again. It is in version 3.6 ... any change BT software? You can install the software separately BT? Or any other advice? Thank you very much
edit: I deleted the original settings in the car. Again the connection and still the same problem.
Before the KitKat update, Moto X would automatically mute whatever audio was playing through my car stereo (non-bluetooth audio, CD, radio, ipod, etc) when I interacted with it. This included texts via Moto Assist, Google Maps nav instructions, or even speech with touchless control. This was one of the main features I loved about this phone.
Now since the update, my phone doesn't mute my car audio any longer. I've tried unpairing and re-pairing the phone with no luck. The muting works fine when playing music from my phone through the bluetooth media option in my car. But it used to also work with other audio from non-bluetooth sources as well. The "Phone Audio" and "Media Audio" settings are checked in the bluetooth pairing on my phone, and the "mute audio" setting is checked for bluetooth on my car. I know that Google introduced some new Bluetooth functionality with 4.4, so not sure what settings might have been changed.
Anyone else have this issue, or know of a fix? For what it's worth, the car is a 2013 Volvo S60.
No one had this issue?
This is my setup:
Aftermarket head unit (IDCORE) connected through AUX to car stereo. AA is connected wireless (S10+, stock) with head unit; there is also car BT connected to mobile; when driving TWO active BT connections: 1, phone - car BT for audio and 2, IDCORE for AA).
And this is my problem:
AUX output (head unit -> car stereo) works, but has a quite annoying (static?) noise. Ground loop isolator is set, everything I can do hardware-wise is done -but the quality of AUX sound is MUCH LESS than it is when using BT phone-car connection (makes sense, Meridian built in system, with fiber optic).
Question:
considering above and that there IS an active phone-car BT audio connection during driving (beside the necessary AA-IDCORE connection) is there a way (software, app, switch?) to route AA sound through the phone-car BT audio connection, instead of the (noisy!) AUX wire?
Rooting of the phone is not an attractive option (due to my company account on the phone) - but I would be interested in any solution; as noise on the AUX output is quite disturbing. Thanks in advance
Have you checked the Bluetooth settings and checked music audio for the connection to the head unit?
Just did it. I CAN route music audio (in my case TuneIn) to BT in the settings of the phone (sounds, separate app sounds setting), but 1, this does not work (no sound over car BT from TuneIn, when using it on AA), 2, this setting can only be set for ONE application at the time (and I also use navigation, news service on AA), 3, the Android Auto app (the one I need?) does not show up in the application list of this setting. Still stuck.
My idea was (but I don't know if it is possible) a nifty app, that FORCES all sound (music, nav, news, etc) from the phone to BT (car), even when using AA.
I've got the same problem, using AA over USB and can't get Viper working because it doesn't stream over Bluetooth.
I have the same request. I have an AA unit attached to an original BMW X5 nav system. I can switch between them by long pressing the MENU button. The problem is that the AA unit can output sound only via audio jack and my car's system has fiber optics. The quality is very poor when compared. Is there anyway in which I can force my Android phone to output AA sound through car's BT? The AA unit has an option to do this for phone calls but unfortunatly not for regular sound (Spotify etc).
Anyone heard of anything related to this? I noticed that in the iPhones there is a setting in the accessibility options to route the audio through bluetooth. But there is nothing similar in AA. I can't believe this feature is not requested more.
Has anyone solved it? I'm struggling with the same thing.
I just ended up buying a BT transmitter which connects to my device's jack audio out and in turn it connects to the car's bt. It is stupid that there is no software solution to such a simple problem. Why can it do it for audio calls but not for music!? Why the iPhone can do it but the all configurable God of a mobile OSes simply can't?
Also, another idiotic thing of AA is that it doesn't allow you to switch the call to speaker or another bt device... in fact nothing happens when I get a call on the actual phone when connected to stupid AA. This is sooooo idiotic. Way to go android...
Aawireless also has a fewture that solves this also
Really? Where? What is it's name? Where do I access this?!
Aawireless: that is a piece of hardware again, isn't it (https://www.aawireless.io/)?
I look for an app/ software to solve this issue, if possible..
Aaahh I thought the reference was to Android Auto Wireless not a 3rd party hardware thing.
Hi all
This is an issue I'm struggling to resolve on my device, I have a Bluetooth receiver in my car, when I get into the car, the phone does auto connect to the receiver, however it does this for calls only. To use it for audio, I need to go into the Bluetooth settings, select the device settings and tick on the audio switch.
Any ideas why it's doing this? I've tried re-pairing the devices with no luck, also can't find anything online specific to this problem.
Thanks!