Official EMUI 9.0 release for Mate 10 Pro (BLA-L29), European version (c432).
Requirements ;
1) Unlocked Bootloader
2) Root (only if you go from EMUI8.0 - > EMUI 9
3) A PC with working ADB
4) Some residual gray matter ?
Download - > https://androidhost.ru/7K8
Installation :
1) Upgrading from EMUI8.0
* use this tool - > https://mega.nz/#!w0kVRJjQ!MxuNRqUWJ-xM-nj2houAGqgreIodqbrwEIfVZ10CDcc
Run flash.bat and follow the on-screen instructions!
2) Updating from EMUI9 beta
* use this tool - > https://mega.nz/#!B9MnBYqQ!Ie7t_5lNSNlfiJqAY6ui_yV9rWyU3UUig2D5MFkdx68
Run flash.bat and follow the on-screen instructions!
Why we need root for 8.0? The download file says no service? Does everthing work? Thanks
inthedark22 said:
Why we need root for 8.0? The download file says no service? Does everthing work? Thanks
Click to expand...
Click to collapse
For the EMUI 8 to 9 tool you will need root. You can do it from TWRP if you wanted to.
But you will need an unlocked bootloader at least, else you won't be able to install it.
No service = its not a service firmware, as most are on androidhost.ru.
Everything works fine. I just flashed it.
inthedark22 said:
Why we need root for 8.0? The download file says no service? Does everthing work? Thanks
Click to expand...
Click to collapse
It says "no service" because it's not a DLOAD firmware.
Sorry, i'm just asking... From where did you got the rom? I see nothing on FF
Pretoriano80 said:
It says "no service" because it's not a DLOAD firmware.
Click to expand...
Click to collapse
Will There be any problem when updating from emui 8.0 to 9.0 if i have deleted some apps from my system folder beforehand ??
ante0 said:
For the EMUI 8 to 9 tool you will need root. You can do it from TWRP if you wanted to.
But you will need an unlocked bootloader at least, else you won't be able to install it.
No service = its not a service firmware, as most are on androidhost.ru.
Everything works fine. I just flashed it.
Click to expand...
Click to collapse
My bootloader is unlocked but everything is stock. Reboot in bootloader and run flash. Bat wont do the trick?
Sheldd said:
Sorry, i'm just asking... From where did you got the rom? I see nothing on FF
Click to expand...
Click to collapse
Got it from a friend, who got it from another friend which found it on www.
inthedark22 said:
My bootloader is unlocked but everything is stock. Reboot in bootloader and run flash. Bat wont do the trick?
Click to expand...
Click to collapse
It won't with the EMUI8 tool as it is now.
I will edit the EMUI9 tool and upload it, it will only require unlocked bootloader.
Edit: You can just use the EMUI9 tool as is, it's using Oreo TWRP and Oreo NoCheck.
As I am sure that EMUI 9 comes with new bootloader, is it possible to flash it without flashing xloader? As the Custom treble rom I want to use do not work on 9.0 vendor, so I could downgrade back.
Or uses the EMUI9 the 02xloader? If 02 then I can upgrade it to try it out!
Hopefully the update doesnt come x years laters for the ones on the official beta lol, anyway have fun guys
L09 nothing yet
how can i root BLA29 c432 157 versiot firmware?
nagyviktor199017 said:
how can i root BLA29 c432 157 versiot firmware?
Click to expand...
Click to collapse
Unlock phone, flash twrp by pretoriano80, flash Magisk zip in twrp.
Alternatively: unlock phone, patch ramdisk in Magisk Manager, flash patched ramdisk in fastboot.
Would this method work for upgrading BLA-L29c636 b145 to BLA-L29C636E2R1P13B159 (9.0.0.159)
Is there any chance of getting a working TWRP/root on this version?
Great news. I've just installed it without problems. Is there any safe way to unroot and relock bootloader?
thatJasper said:
Is there any chance of getting a working TWRP/root on this version?
Click to expand...
Click to collapse
Apparently the root developers, amongst others John Wu (Magisk), are working to get a simple way to root EMUI 9.0.
The root has already been confirmed to be working on the Huawei Mate 10 Pro and more devices should join the party sooner or later.
Click to expand...
Click to collapse
https://www.theandroidsoul.com/emui-9-0-already-rooted/
the rom is working, but horrible performance. 125 000 points with antutu. fully working but very slow. i back to stock emui 8
Pretoriano80 said:
It says "no service" because it's not a DLOAD firmware.
Click to expand...
Click to collapse
I'm on emui 9 beta and my bootloader and FRP were both unlocked. I removed all the scheme (fingerprint ecc.) ... but when i tred to flash the upgrade with your tool I saw that the FRP got locked. In the Setting options, Developper, (OEM unlock option is not anymore active). How can I restore this options to go on with the upgrade? Thank in advance.
Related
Hello,
I'm trying to root my honor 5c/7 lite that is running android 7.0 and EMUI 5.0 on it and it runs very smooth , but when I flash TWRP 3.1.0.0, twrp never loads up, it's just stuck in "You device is booting now" when trying to enter recovery.
The method I use is the manual method via bootloader:
HTML:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
And yes my bootloader is obviously unlocked!
I did only have 20% battery left however, if that affects it at all?
Before I flashed Android 7.0 and EMUI 5.0 onto the device, I had no problem rooting it the same way with the same recovery.
UPDATE:
I'm now on android 6.0 / EMUI 4.1.2
I have flash TWRP 3.1.0.0 and rooted with superSu v2.79 SR3
SeriousSet2 said:
Hello,
I'm trying to root my honor 5c/7 lite that is running android 7.0 and EMUI 5.0 on it and it runs very smooth , but when I flash TWRP 3.1.0.0, twrp never loads up, it's just stuck in "You device is booting now" when trying to enter recovery.
The method I use is the manual method via bootloader:
HTML:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
And yes my bootloader is obviously unlocked!
I did only have 20% battery left however, if that affects it at all?
Before I flashed Android 7.0 and EMUI 5.0 onto the device, I had no problem rooting it the same way with the same recovery.
Click to expand...
Click to collapse
You should be on EMUI 4 before flashing twrp.
Shubho20 said:
You should be on EMUI 4 before flashing twrp.
Click to expand...
Click to collapse
How to downgrade?
SeriousSet2 said:
How to downgrade?
Click to expand...
Click to collapse
Refer to the honor site for downgrade instruction. U need to flash a seperate update.app before flashing the full update.app. U will get these all in the downgrade instructions.
Shubho20 said:
Refer to the honor site for downgrade instruction. U need to flash a seperate update.app before flashing the full update.app. U will get these all in the downgrade instructions.
Click to expand...
Click to collapse
Only found NEM-L22 version
SeriousSet2 said:
Only found NEM-L22 version
Click to expand...
Click to collapse
I don't think that will work. Just check in the honor 5C community.
Shubho20 said:
I don't think that will work. Just check in the honor 5C community.
Click to expand...
Click to collapse
Managed to find a rollback package, but how do I install, I tried making a dload folder but that didn't work.
SeriousSet2 said:
Managed to find a rollback package, but how do I install, I tried making a dload folder but that didn't work.
Click to expand...
Click to collapse
In the rollback instructions u will find a seperate update.app and a full update.app. U need to first flash the seperate update.app by putting it in dload folder. After flashing that reboot then replace that dload folder with the full update in dload. Flash that. Then u will be on EMUI 4.
Ok, I have successfully downgraded my phone now. Is it now possible to root my phone then flash android 7 onto it?
SeriousSet2 said:
Ok, I have successfully downgraded my phone now. Is it now possible to root my phone then flash android 7 onto it?
Click to expand...
Click to collapse
You can root it after flashing Emui 5, but u can't flash twrp as of now. Twrp for Emui 5 is not available right now.
I just flashed lineage OS 13 instead
So there is no way to root emui 5/android 7 without rolling back to 6?
kiejon said:
So there is no way to root emui 5/android 7 without rolling back to 6?
Click to expand...
Click to collapse
in beta 1 someone managed to get root but i dont think it works on beta 2.
thelous said:
in beta 1 someone managed to get root but i dont think it works on beta 2.
Click to expand...
Click to collapse
Okay thanks for the info!
plz help to root for nougat and to be volte supported... rom
Sent from my PLK-UL00 using Tapatalk
Shubho20 said:
You can root it after flashing Emui 5, but u can't flash twrp as of now. Twrp for Emui 5 is not available right now.
Click to expand...
Click to collapse
same issue here. if twrp doesn't support emui 5 as of now, aren't there any other recoveries for it like cwm or anything else? tried kingroot etc with no luck.. and nougat update came with SO MUCH bloatware that needs to be uninstalled asap!
KrishMehta said:
same issue here. if twrp doesn't support emui 5 as of now, aren't there any other recoveries for it like cwm or anything else? tried kingroot etc with no luck.. and nougat update came with SO MUCH bloatware that needs to be uninstalled asap!
Click to expand...
Click to collapse
bloatware doesnt eat battey, unless you have 1 gb sdcard it should be fine. also you can delete all data and disable them.
KrishMehta said:
same issue here. if twrp doesn't support emui 5 as of now, aren't there any other recoveries for it like cwm or anything else? tried kingroot etc with no luck.. and nougat update came with SO MUCH bloatware that needs to be uninstalled asap!
Click to expand...
Click to collapse
In Huawei P9 lite thread there is a Twrp recovery for nougat, EMUI 5. Developer is oldDroid. He wants to support honor 5c with his twrp. Bt he needs testers. Just contact him if u want.
thelous said:
bloatware doesnt eat battey, unless you have 1 gb sdcard it should be fine. also you can delete all data and disable them.
Click to expand...
Click to collapse
yep. apart from that i also want to improve audio quality by flashing some mod like acid or dolby and root is a must for that.. thx for your reply
---------- Post added at 09:18 PM ---------- Previous post was at 09:12 PM ----------
Shubho20 said:
In Huawei P9 lite thread there is a Twrp recovery for nougat, EMUI 5. Developer is oldDroid. He want to support honor 5c with his twrp. Bt he needs testers. Just contact him if u want.
Click to expand...
Click to collapse
Just contacted him and now awaiting his reply.. Thanks for your help!
KrishMehta said:
yep. apart from that i also want to improve audio quality by flashing some mod like acid or dolby and root is a must for that.. thx for your reply
---------- Post added at 09:18 PM ---------- Previous post was at 09:12 PM ----------
Just contacted him and now awaiting his reply.. Thanks for your help!
Click to expand...
Click to collapse
Ya, me too
Hi All,
I found some people have lost Volte on their Honor 10 phones by flashing LastStandingDroid's img. (which may not be compatible with devices in India)
Below are the versions which you can use for India.
Installation :
1. Download the attachment and place it in the same directory as your fastboot.
2. Make sure that you have unlocked the bootloader.
3. Run :
Code:
fastboot flash ramdisk col_al10_magisk_120.img
OR
Code:
fastboot flash ramdisk col_al10_magisk_131.img
OR
Code:
fastboot flash ramdisk col_al10_magisk_140.img
OR
Code:
fastboot flash ramdisk col_al10_magisk_150.img
4. Install Magisk Manager
5. Install Magisk using Magisk Manager just to be sure.
(Please click on Thanks button instead of posting 'Thanks' as a reply. Helps keep the thread clean ! )
**WARNING** : I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.
PLEASE DO NOT FLASH IF YOU ARE UNAWARE OF WHAT YOU ARE DOING
**Disclaimer**
The patches have been created using Magisk. So BIG THANKS & Credit goes to Magisk Team for working hard and being so cool !
Can I flash this on 131 version. I just got updated to this version today or this is only for older versions?
srharshajava said:
Can I flash this on 131 version. I just got updated to this version today or this is only for older versions?
Click to expand...
Click to collapse
This should be for 8.1.0.120.
Btw, I didnt get any notification for 131 update. Have they made any changes to Ramdisk ? If yes, then its better not to flash. If there is no changes in Ramdisk, then you can flash.
I'm talking about the update details in attachments
srharshajava said:
I'm talking about the update details in attachments
Click to expand...
Click to collapse
Try the new file updated in the 1st Post -> col_al10_magisk_131.img
Not getting root access even after flashing the image !! what are the steps, just in case i'm missing something here? Unlock Bootloader -- > Flash image via fastboot ---> reboot
srharshajava said:
Not getting root access even after flashing the image !! what are the steps, just in case i'm missing something here? Unlock Bootloader -- > Flash image via fastboot ---> reboot
Click to expand...
Click to collapse
You also have to download and install Magisk Manager. Without it you wont get root.
Unlock Bootloader -> Flash image via fastboot --> Reboot ---> Install Magisk Manager --> Install Magisk using Magisk Manager again just to be sure.
Will this image work with COL-L29 ??
animavitis said:
Will this image work with COL-L29 ??
Click to expand...
Click to collapse
Use LastStandingDroid's img in the other thread. This Image is for COL-AL10.
but you need something to do all this to install the magisk when then in reality you have created absolutely no rom that can be alternative I have equally valid nor a kernel that can increase the performance or eventually the battery life?
Just got the GPU turbo update (140) in India.
Will it work On the 140?
Edit : also, isn't it is easier to flash twrp first and then flash magisk(official one, no modifications) itself?
How do I get the code to unlock the bootloader?
Lucas_Dias said:
How do I get the code to unlock the bootloader?
Click to expand...
Click to collapse
Not officially anymore.
You can try dc unlocker, HCU client, Chimera tool, sigmakey, all paid though
shashank1320 said:
Not officially anymore.
You can try dc unlocker, HCU client, Chimera tool, sigmakey, all paid though
Click to expand...
Click to collapse
What is the most efficient method?
Lucas_Dias said:
What is the most efficient method?
Click to expand...
Click to collapse
Purchase dc unlocker credit, use via hcu client.check in honor 7X section, there is a detailed guide on this.
Edit- there is some good news. Huawei is giving BL code for limited devices.
https://forum.xda-developers.com/ho...t/honor-bootloader-unlocking-limited-t3837880
And for the Russian model it is fashionable to install a magisk?
fosterqaz11 said:
Just got the GPU turbo update (140) in India.
Will it work On the 140?
Edit : also, isn't it is easier to flash twrp first and then flash magisk(official one, no modifications) itself?
Click to expand...
Click to collapse
Can you try and let me know if it works on 140 ?
The above method is for rooting while keeping your default recovery for OTA.
gbhartia said:
Can you try and let me know if it works on 140 ?
The above method is for rooting while keeping your default recovery for OTA.
Click to expand...
Click to collapse
I'm already rooted and using with twrp. During my time there was no source for my Indian ramdisk so couldn't able to back my recovery .
I root it via tool call " Huawei team mt multi tool".
The thing is I wanted to keep my default recovery also but firmware Finder didn't have any full firmware that time. Now, somehow I pull the latest 142 firmware for Indian version, if you want for 142 I can make a patch magisk if you want to use that's it
fosterqaz11 said:
I'm already rooted and using with twrp. During my time there was no source for my Indian ramdisk so couldn't able to back my recovery .
I root it via tool call " Huawei team mt multi tool".
The thing is I wanted to keep my default recovery also but firmware Finder didn't have any full firmware that time. Now, somehow I pull the latest 142 firmware for Indian version, if you want for 142 I can make a patch magisk if you want to use that's it
Click to expand...
Click to collapse
Please do upload so everyone can use. I still am not able to get the latest firmware to patch.
I received my unlock code some time when they were giving away unlock codes but haven't done anything with it. Is the code still valid?
*Tried it out myself and it still works.*
I can only speak for BLA-L29C432B197 (Probably B179 too), but I assume this will cover any Pie firmware released in January.
In these releases Huawei disabled custom kernel, so phone won't boot with a custom kernel flashed.
This had me wanting to downgrade to B161 where it does work. So I try with NoCheck, which is fine to update with, Software install failed.
I try with FH (I happened to have a credit left) HiSuite method, Software install failed.
I tried with Dload package, same result.
So I figure I can use Rollback, as it worked fine on Beta to get back to Oreo with it...
It failed after 7% (or so, I didn't actually watch), device reboot to a black screen. Fastboot was working though.
So it most likely only flashed Oreo bootloader, and device was hardbricked. I managed to get it back using test point and IDT, this will void your warranty though.
So, do not downgrade using NoCheck recovery and rollback package, it's not worth the time to get device back.
Edit: Downgrade from Pie B197 to Oreo B157 is fine using NoCheck.
ante0 said:
So, do not downgrade using NoCheck recovery and rollback package, it's not worth the time to get device back.
Click to expand...
Click to collapse
So, there are no options to downgrade from 197? WTF is wrong with Huawei?
ante0 said:
So, do not downgrade using NoCheck recovery and rollback package, it's not worth the time to get device back.
Click to expand...
Click to collapse
And probably will also require spending money on other tools. Backups are also important, so people with rooted devices should use Partitions Backup (by wanam) and backup nvme, oeminfo and modem partitions.
As for downgrading with DLOAD or HiSuite we have no idea if it will work or if it will brick. Original recovery/eRecovery might have a fail safe mechanism.
badmania98 said:
So, there are no options to downgrade from 197? WTF is wrong with Huawei?
Click to expand...
Click to collapse
Dload might work or just refuse to downgrade, but i don't think it will brick.
Pretoriano80 said:
Partitions Backup (by wanam) and backup nvme, oeminfo and modem partitions.
Click to expand...
Click to collapse
Where I can find this app, and what version I have to use?
I installed Partitions Backup & Restore 2.0.1.
LE. Backup Done.
also.it's happened in alp-al00（mate10 china）.
Sent from my HUAWEI ALP-AL00 using XDA Labs
”5. This system version can be rolled back to the official version of EMUI 8.0 in Phone Manager. Rolling back the system version will erase your personal data. For more information, please contact the customer service hotline.” - according to description of v.197 firmware.
Where is this option in the phone menu? It is written in v.179 firmware, also.
badmania98 said:
”5. This system version can be rolled back to the official version of EMUI 8.0 in Phone Manager. Rolling back the system version will erase your personal data. For more information, please contact the customer service hotline.” - according to description of v.197 firmware.
Where is this option in the phone menu? It is written in v.179 firmware, also.
Click to expand...
Click to collapse
There's none! I don't know what they mean with Phone Manager. My guess is that HiSuite = Phone Manager.
zt379 said:
also.it's happened in alp-al00（mate10 china）.
Click to expand...
Click to collapse
When downgrading with No_check recovery?
I asked Huawei centre about downgrade and they told me that is possible in service centre only.
ante0 said:
I can only speak for BLA-L29C432B197 (Probably B179 too), but I assume this will cover any Pie firmware released in January.
In these releases Huawei disabled custom kernel, so phone won't boot with a custom kernel flashed.
This had me wanting to downgrade to B161 where it does work. So I try with NoCheck, which is fine to update with, Software install failed.
I try with FH (I happened to have a credit left) HiSuite method, Software install failed.
I tried with Dload package, same result.
So I figure I can use Rollback, as it worked fine on Beta to get back to Oreo with it...
It failed after 7% (or so, I didn't actually watch), device reboot to a black screen. Fastboot was working though.
So it most likely only flashed Oreo bootloader, and device was hardbricked. I managed to get it back using test point and IDT, this will void your warranty though.
So, do not downgrade using NoCheck recovery and rollback package, it's not worth the time to get device back.
Click to expand...
Click to collapse
Hey there, search on forum a tool for P20 Pro. From 179 i came back on 158 Oreo
Pretoriano80 said:
There's none! I don't know what they mean with Phone Manager. My guess is that HiSuite = Phone Manager.
When downgrading with No_check recovery?
Click to expand...
Click to collapse
perhaps never! and now hope xda developers could handle this bad things
Sent from my HUAWEI ALP-AL00 using XDA Labs
lorenzomeini56 said:
Hey there, search on forum a tool for P20 Pro. From 179 i came back on 158 Oreo
Click to expand...
Click to collapse
Can you put a link to this tool.?
badmania98 said:
Can you put a link to this tool.?
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p20/how-to/guide-how-to-rollback-emui-9-beta-to-t3841687
lorenzomeini56 said:
Hey there, search on forum a tool for P20 Pro. From 179 i came back on 158 Oreo
Click to expand...
Click to collapse
does it works in other kirin970 devices of emui9 to emui8？？
Sent from my HUAWEI ALP-AL00 using XDA Labs
lorenzomeini56 said:
https://forum.xda-developers.com/huawei-p20/how-to/guide-how-to-rollback-emui-9-beta-to-t3841687
Click to expand...
Click to collapse
This tool we already have it. I dont know if ante0 used it this time, but I think he did ( contains nocheck.img).
badmania98 said:
This tool we already have it. I dont know if ante0 used it this time, but I think he did ( contains nocheck.img).
Click to expand...
Click to collapse
Yep. Same NoCheck.img.
Edit: well, unless that nocheck is for p20... That might be why.
I will compare them.
I can confirm that in connecting my ALP-29 to my Windows 10 PC with HiSuite, I get offered the choice to roll back to Oreo. But the small print warns that your device should not be rooted or unlocked. I'm happy with Pie, so I'm not tempted to check whether this works without bricking your device, but just letting folks know about the purported option. Presumably if you try, you should at minimum unroot first......You also will be factory wiped.
ante0 said:
to get back to Oreo .
Click to expand...
Click to collapse
To what version of Oreo did you tried to get back?
badmania98 said:
To what version of Oreo did you tried to get back?
Click to expand...
Click to collapse
B150, the rollback version. I figured that would work as it is a rollback. But I should maybe have gone with B158.
Either way, don't do it with NoCheck for BLA
I'm almost done repairing device!
ante0 said:
B150, the rollback version. I figured that would work as it is a rollback. But I should maybe have gone with B158.
Click to expand...
Click to collapse
B150 was the roll back from Pie Beta. According to FF, I think that B156 and 157 are the roll back from official Pie.
badmania98 said:
B150 was the roll back from Pie Beta. According to FF, I think that B156 and 157 are the roll back from official Pie.
Click to expand...
Click to collapse
B157 should be the roll-back version. But a P20 Pro owner bricked when downgrading with HiSuite, with a completely stock device, so....
Hey I have p20 pro EU version 6/128
Today I got a new update about Google security.
I want every update run on my phone
But I rooted my device.
I wanted first to ask guys , I tried to update but was unsuccessful. I do not have twrp because of the method I used to root p20 pro didn't allow me having magisk and twrp recovery.
So now if I want to update have to do it manually ?
2 questions
1) which program do I use ?
2) where I can find the firmware Official WITHOUT BEEING CHANGED ANYTHING inside from someone third.
Thanks John
You need to flash the stock bootloader. If you are running Pie and Magisk, you have a modified bootloader. I don't know where to download the stock one. Could probably rip it from a stock Pie firmware.
Me to have twrp on my p20 pro and i cannot update my phone.. Have new update but when I try system update after download, its entering to recovery mode for install the firmware but it cannot coz working twrp and unsuccessful installation.
Me to look for stock recovery for clt-l29 pie
purple patch said:
You need to flash the stock bootloader. If you are running Pie and Magisk, you have a modified bootloader. I don't know where to download the stock one. Could probably rip it from a stock Pie firmware.
Click to expand...
Click to collapse
stock bootloader? where i find this?
StonebridgeGr said:
stock bootloader? where i find this?
Click to expand...
Click to collapse
I mean stock recovery ramdisk, or whatever they call it on Huawei. Will need the 9 version asfaik.
https://forum.xda-developers.com/hu...awei-p20-pro-charlotte-l29c432b131-8-t3809964
danifilth4king said:
https://forum.xda-developers.com/hu...awei-p20-pro-charlotte-l29c432b131-8-t3809964
Click to expand...
Click to collapse
i am not trying to find guide to upgrade from 8.0 to 9.0.
I am already on 9,0 but i got a new update for google security and i want to update
which is the guide for this or is the same?
StonebridgeGr said:
i am not trying to find guide to upgrade from 8.0 to 9.0.
I am already on 9,0 but i got a new update for google security and i want to update
which is the guide for this or is the same?
Click to expand...
Click to collapse
https://forum.xda-developers.com/hu...charlotte-l29c432b131-8-t3809964/post79034970
The apk from this post will allow you to download the latest firmware for your model from firmware finder and flash it without needing TWRP or having to flash stock recovery. You will have to re-root afterwards though
danifilth4king said:
https://forum.xda-developers.com/hu...charlotte-l29c432b131-8-t3809964/post79034970
The apk from this post will allow you to download the latest firmware for your model from firmware finder and flash it without needing TWRP or having to flash stock recovery. You will have to re-root afterwards though
Click to expand...
Click to collapse
thanks but the link of the app is dead
is the same app as is one the google play?
danifilth4king said:
https://forum.xda-developers.com/hu...charlotte-l29c432b131-8-t3809964/post79034970
The apk from this post will allow you to download the latest firmware for your model from firmware finder and flash it without needing TWRP or having to flash stock recovery. You will have to re-root afterwards though
Click to expand...
Click to collapse
I got the app on pc and android, tried to find the last firmware 9.0.0.203 on clt-l29 c432e5r1p9 but there is no.
StonebridgeGr said:
I got the app on pc and android, tried to find the last firmware 9.0.0.203 on clt-l29 c432e5r1p9 but there is no.
Click to expand...
Click to collapse
Download the current version you are using. Extract recovery_ramdisk.img and flash. Reboot and take OTA update. You will lose root, as I said you have a modified recovery and need stock to take OTA.
Edit - Once your done, patch the bootloader from Magisk and flash to get root again.
purple patch said:
Download the current version you are using. Extract recovery_ramdisk.img and flash. Reboot and take OTA update. You will lose root, as I said you have a modified recovery and need stock to take OTA.
Edit - Once your done, patch the bootloader from Magisk and flash to get root again.
Click to expand...
Click to collapse
i just flash recovery ramdisk hmm i think it will brick my device.
how do i flash it?
Comming soon.. maybe this year
il3gal said:
Comming soon.. maybe this year
Click to expand...
Click to collapse
That's old, there's already a B140 build. xD
Pretoriano80 said:
That's old, there's already a B140 build. xD
Click to expand...
Click to collapse
FF is always behind a bit I think, but if it's there it means its coming soon.
Pretoriano80 said:
That's old, there's already a B140 build. xD
Click to expand...
Click to collapse
Looking forward for an update solution from you and ante0.
badmania98 said:
Looking forward for an update solution from you and ante0.
Click to expand...
Click to collapse
All versions of EMUI10 that I've tested so far, force locks bootloader. So don't install if you don't want to get locked. I guess if you have beta access approved you can downgrade back to 9.1 using HiSuite.
I have to downgrade using testpoint
Fastboot will still say you're unlocked but the command fastboot oem lock-state info says it's locked. Downgrading back to 9.1 will give back the unlock status, apparently. I guess they just add something to lock even if you're technically still unlocked. And the command to unlock through fastboot is removed so no way to unlock it again. I hope it's just locking for the beta.
ante0 said:
All versions of EMUI10 that I've tested so far, force locks bootloader. So don't install if you don't want to get locked. I guess if you have beta access approved you can downgrade back to 9.1 using HiSuite.
I have to downgrade using testpoint
Fastboot will still say you're unlocked but the command fastboot oem lock-state info says it's locked. Downgrading back to 9.1 will give back the unlock status, apparently. I guess they just add something to lock even if you're technically still unlocked. And the command to unlock through fastboot is removed so no way to unlock it again. I hope it's just locking for the beta.
Click to expand...
Click to collapse
Maybe it is necessary to downgrade till EMUI 8.0?
I don't have beta access till now. But , as you know, I follow your and Pretoriano80 work very carefully.
badmania98 said:
Looking forward for an update solution from you and ante0.
Click to expand...
Click to collapse
Like @ante0 said in the previous post, we already have the links for the updates, but so far all of them will trigger the bootloader lock, so unless you don't care about it, you should refrain from flashing EMUI10.
If the final release won't change this behavior, then probably Huawei has decided to lock the bootloader for good.
Pretoriano80 said:
Like @ante0 said in the previous post, we already have the links for the updates, but so far all of them will trigger the bootloader lock, so unless you don't care about it, you should refrain from flashing EMUI10.
If the final release won't change this behavior, then probably Huawei has decided to lock the bootloader for good.
Click to expand...
Click to collapse
I prefer to wait. If you 2 will find a good solution to maintain boot-loader unlocked, I will follow it.
badmania98 said:
Maybe it is necessary to downgrade till EMUI 8.0?
I don't have beta access till now. But , as you know, I follow your and Pretoriano80 work very carefully.
Click to expand...
Click to collapse
Downgrade to EMUI 8?
Well, if you do like me you have to as I have to flash board when BL is locked.
If you mean to keep unlock it won't work. Update from Oreo to Q directly will cause problems, it did for me when going Oreo to 9.1 anyway, and system update actually forces you to flash the latest stable 9.0 (9.0.0.197) to update to 9.1.0.300 then to 9.1.0.306.
And it's not like it's using a function to lock BL like they do when you flash a dload firmware. It's probably still unlocked but something changes it to locked. Iirc you could unlock using TP before, but now it refuses as USERLOCK is changed to unlock as well when you use testpoint, so it will just say "Phone is already unlocked", before it only changed FBLOCK to unlock.
But we will see what happens
@ante0 @Pretoriano80 : just in case I would install this beta from FF. What install method I have to use?
badmania98 said:
@[email protected] : just in case I would install this beta from FF. What install method I have to use?
Click to expand...
Click to collapse
Installing with no-check recovery should work just fine, but you should also flash the new CUST and Preload.
If you really want to flash it, i can send you the link with the latest build (B140), but like i said, it will lock your bootloader.
Pretoriano80 said:
Installing with no-check recovery should work just fine, but you should also flash the new CUST and Preload.
If you really want to flash it, i can send you the link with the latest build (B140), but like i said, it will lock your bootloader.
Click to expand...
Click to collapse
Yes, thanks in advance. Also the link for the no-check recovery & tool.
LE. It is from somebody else.
badmania98 said:
Yes, thanks in advance. Also the link for the no-check recovery & tool.
LE. It is from somebody else.
Click to expand...
Click to collapse
It's a BLA-L29 C432 device?
Pretoriano80 said:
It's a BLA-L29 C432 device?
Click to expand...
Click to collapse
Yes.
badmania98 said:
Yes.
Click to expand...
Click to collapse
You can use the 3 files tool (skip the rooting part, of course) from here -> https://forum.xda-developers.com/mate-10/how-to/tool-emui-9-0-to-9-1-upgrade-tool-t3949867 <- and replace the nocheck.img with the one from here (tge no verification version) - > https://forum.xda-developers.com/mate-10/development/recovery-nocheck-pie-t3950037
Make sure that the downloaded firmwares are not corrupt, otherwise the installation may fail, because the no-check recovery will skip the integrity check.
I will send you the update files in PM.
i'd like to have a link for the update files aswell please, on firmware finder PC version there's only 10.0.139
vandal4e said:
i'd like to have a link for the update files aswell please, on firmware finder PC version there's only 10.0.139
Click to expand...
Click to collapse
It doesn't really matter. When you flash it you won't be able to flash any newer ones as you won't be unlocked anymore, and can't unlock again either without downgrading back to 9.1.
I would wait until official to see if forced locking remains or not.