Database Develop

Gel case that fits with Inductive battery cover

Is there a case that fits with the inductive battery cover? I have the case/holster that has the built in kick stand (not the body glove one, but the one that will fit the extended battery as well) that is at Verizon stores. I had a semi rigid gel case but it wont fit the inductive charging cover. I really liked the look and feel of the case, plus I like how it protected the ends of the phone unlike the hard case that I have now.

anyone??? help!!

nothing yet????

nothing at this moment hopefully soon. Im looking for a case for the extended battery besides the ugly shell case and holster combo im straight.

Yes
I saw one at Best Buy yesterday. Black in color, under 20$. For standard battery. Can't remember the brand.
Nevermind. It was not for the inductive cover.

docabe said:
I saw one at Best Buy yesterday. Black in color, under 20$. For standard battery. Can't remember the brand.
Click to expand...
Click to collapse
but will it fit with the inductive charging cover? Withe the charging cover the phone is a different shape, here in-lies the problem.

How big a difference is there between standard cover and inductive charging cover?

The back is flat, there is no more camera hump.

Cases That Work With QI Wireless

as the thread basically says it all, I'm looking for a case that will work with QI wireless charging for the G4. i like the spigen stuff but it doesn't appear to work...

I have been using the newisdom upgraded chip and tylt vu charger combo and havent had any problems charging with the spigen neo-hybrid, verus thor and urban armor gear cases.

The Spigen Air Cushion Slim Armor case works with the NeWisdom upgraded Qi chip without any issues with my CHOE Stadium Qi Wireless Charger.
The Diztronic matte TPU case works too

Supcase beetle (black with frost center) and new wisdom qi sticker and Nokia fatboy 3 coil qi charger.. NO issues here
Sent from my VS986 using XDA Free mobile app

anyone know if the spigen neo hybrid or http://www.amazon.com/Case-Verus-Ve...=UTF8&qid=1438867236&sr=8-1&keywords=verus+G4

Diztronic tpu case works with my Nokia fatboy 3 coil qi charger
Sent from my VS986 using XDA Free mobile app

I've got the Spigen Slim Armor case, with a generic wireless sticker and have no issues with wireless charging with either my Itian 3 coil charger or generic puck.

Youd have better answers to the question, "which dont don't work with qi".
Because most will

bsweetness said:
The Spigen Air Cushion Slim Armor case works with the NeWisdom upgraded Qi chip without any issues with my CHOE Stadium Qi Wireless Charger.
The Diztronic matte TPU case works too
Click to expand...
Click to collapse
Interesting. I have the Diztronic case you're talking about and the same charger, but a Yootech receiver. It works fine without the case but won't charge with the case. I've also tried the first version of the Samsung charging pad and it's the same result so I guess I can call it the receiver.

Darth_Munkee said:
Interesting. I have the Diztronic case you're talking about and the same charger, but a Yootech receiver. It works fine without the case but won't charge with the case. I've also tried the first version of the Samsung charging pad and it's the same result so I guess I can call it the receiver.
Click to expand...
Click to collapse
I have no problems using the CHOE Stadium Qi Wireless Charger with the Diztronic case either. I purchased my QI wireless sticker from ebay. Shipped from china or something, not sure on brand.

Any leather back-cover (like the original one) that works with QI charging WITHOUT needing to make the "sticker modification" to the shell?
If not, what is in Your opinion the best wireless QI charging sticker for LG G4?
Thx!
/timo

this combo did NOT work: http://www.amazon.com/gp/product/B00NWMI07S with http://www.amazon.com/gp/product/B00V51QOXA. its VERY finiky

I have the Spigen LG G4 Neo Hybrid Case - works perfectly with a wireless charging back ... charges quick and doesn't heat up.

tjsuominen said:
Any leather back-cover (like the original one) that works with QI charging WITHOUT needing to make the "sticker modification" to the shell?
If not, what is in Your opinion the best wireless QI charging sticker for LG G4?
Thx!
/timo
Click to expand...
Click to collapse
As far as I know there is no official leather cover with qi. Nevertheless you can buy some from china with attached sticker.
I've attached a sticker on my own leather cover and it worked approx. 2 days perfect. But since then no connection and I wasn't able to fix.

Qi charging lg g4
I just cut the front door off a quick circle case and put g4 in a bumper case. Works fine. Better than messing with qi stickers

i got one of these..... http://www.ebay.co.uk/itm/151745479...49&var=450942342923&ssPageName=STRK:MEBIDX:IT works perfect surprisingly and only £7

I have a Otter Commuter case https://www.amazon.com/OtterBox-Com...8&qid=1464832541&sr=8-4&keywords=otter+box+g4 works fine and very heavy duty, dropped many times with no problem for phone. 2 pieces.

Case that supports magnetic card mount and wireless charging?

Are there any cases besides the sold out Pitaka one that support both features?

XVIDA StickyPad compatible with most cases
skinote said:
Are there any cases besides the sold out Pitaka one that support both features?
Click to expand...
Click to collapse
Apologies for the long reply...
You can check out XVIDA. I use the XVIDA Car Mount and an XVIDA StickyPad. (Note the XVIDA StickyPad works with the phone naked or with a smooth back case)
The are three variants. Suction Cup, Air Vent, and CD Slot Mount.
I also use their Desk Mount and Mountable Pad.
I am not sure if the XVIDA StickyPad is compatible with the Pitaka case. I am curious to know though. I have an X-Doria Galaxy Note 8 Case Defense Lux Carbon Fiber case, XVIDA StickyPad, Case friendly 0.33mm dot matrix tempted glass protector, and a uh ring finger thing. I like how the Pitaka case looks not sure about drop protection.
This case and screen protector combo has saved from a weird drop. Flying out of my hands screen first unto the metal protusions of a shopping cart. Broken screen protector near the Iris scanner and bottom near the default location of the back button. Screen was saved with no scratches or anything. I panicked though since this was just 3 days from my purchase.
Note:
If the Note 8 case isn't smooth you need to use stronger double sided adhesives.

raphael.atienza said:
Apologies for the long reply...
You can check out XVIDA. I use the XVIDA Car Mount and an XVIDA StickyPad. (Note the XVIDA StickyPad works with the phone naked or with a smooth back case)
The are three variants. Suction Cup, Air Vent, and CD Slot Mount.
I also use their Desk Mount and Mountable Pad.
I am not sure if the XVIDA StickyPad is compatible with the Pitaka case. I am curious to know though. I have an X-Doria Galaxy Note 8 Case Defense Lux Carbon Fiber case, XVIDA StickyPad, Case friendly 0.33mm dot matrix tempted glass protector, and a uh ring finger thing. I like how the Pitaka case looks not sure about drop protection.
This case and screen protector combo has saved from a weird drop. Flying out of my hands screen first unto the metal protusions of a shopping cart. Broken screen protector near the Iris scanner and bottom near the default location of the back button. Screen was saved with no scratches or anything. I panicked though since this was just 3 days from my purchase.
Note:
If the Note 8 case isn't smooth you need to use stronger double sided adhesives.
Click to expand...
Click to collapse
I already have 2 scosche magnetic car mounts, so I was hoping for a solution that used those...that stickypad sounds like it might work, though, if there aren't any other options.

skinote said:
I already have 2 scosche magnetic car mounts, so I was hoping for a solution that used those...that stickypad sounds like it might work, though, if there aren't any other options.
Click to expand...
Click to collapse
Oh sadly the Scosche Magnetic Car Mounts won't work. The magnets have to be around the qi wireless charging transmitter on the mount. Magnets and metal interferes with Qi wireless charging. In fact Qi wireless charging also slightly interferes with the S-Pen when using a wireless charging powerbank. I even got a notification pop-up stating that.
Mophie also has a solution but I don't want a battery case.

raphael.atienza said:
Oh sadly the Scosche Magnetic Car Mounts won't work. The magnets have to be around the qi wireless charging transmitter on the mount. Magnets and metal interferes with Qi wireless charging. In fact Qi wireless charging also slightly interferes with the S-Pen when using a wireless charging powerbank. I even got a notification pop-up stating that.
Mophie also has a solution but I don't want a battery case.
Click to expand...
Click to collapse
Hrm, yeah the mophie also isn't water resistant. Wonder if the Pitaka really is the only solution for the time being...? Too bad so many people seem to be having customer support issues with them!

I have a Pitaka case and it is the only one that works with mag mounts and wireless charging. I think Pitaka is just overwhelmed with orders. Before I got this case I had to use a metal plate a small one and put it on the outside of my case all the way up by the camera for it to work with my wireless charger. It looks horrible but it worked. So when I heard about Pitaka I jumped on it fast. I ordered mine and the car mount and I received it in about 8 days. I would just keep checking back with them. It is well worth it.

Actually.. I did a slight modification to my spiegen, and it does both.. The only thing I did was cut one of the round magnets in half, and then, placed it in the normal indention for the magnet.. And I have used it now, for at least a good month without issue.. I also turn the phone landscape on the charging stand sometimes to watch a video while charging...
Sent from my SM-N950U using Tapatalk

MatroxD said:
Actually.. I did a slight modification to my spiegen, and it does both.. The only thing I did was cut one of the round magnets in half, and then, placed it in the normal indention for the magnet.. And I have used it now, for at least a good month without issue.. I also turn the phone landscape on the charging stand sometimes to watch a video while charging...
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Which spigen case? sounds like an easy mod

skinote said:
Which spigen case? sounds like an easy mod
Click to expand...
Click to collapse
It was very easy mod.. Took about 3 minutes to cut the magnet.. The most difficult part of course was cutting the magnet(but if you have a dremel, it's a non thought). And it is the thin fit case.. Very, very easy.... Link below to the case and the magnets:
Spigen Thin Fit Galaxy Note 8 Case with SF Coated Non Slip Matte Surface for Excellent Grip and QNMP Compatible for Galaxy Note 8 (2017) - Matte Black https://www.amazon.com/dp/B073R7DFG1/ref=cm_sw_r_cp_apa_3zFgAb7GTE32F
Spigen Kuel A210 Metal Plates for Magnetic Car Mount Phone Holder QNMP Compatible [4 Pack - 2 Round, 2 Rectangle] - Black https://www.amazon.com/dp/B01E4U4X1I/ref=cm_sw_r_cp_apa_5DFgAbYYKBABH
Sent from my SM-N950U using Tapatalk

If you are willing to pay the price. Mophie's Charge Force line has this.
about 50 for the case and another 50 for the car charger.
100 for the case for the battery case version

MatroxD said:
It was very easy mod.. Took about 3 minutes to cut the magnet.. The most difficult part of course was cutting the magnet(but if you have a dremel, it's a non thought). And it is the thin fit case.. Very, very easy.... Link below to the case and the magnets:
Spigen Thin Fit Galaxy Note 8 Case with SF Coated Non Slip Matte Surface for Excellent Grip and QNMP Compatible for Galaxy Note 8 (2017) - Matte Black https://www.amazon.com/dp/B073R7DFG1/ref=cm_sw_r_cp_apa_3zFgAb7GTE32F
Spigen Kuel A210 Metal Plates for Magnetic Car Mount Phone Holder QNMP Compatible [4 Pack - 2 Round, 2 Rectangle] - Black https://www.amazon.com/dp/B01E4U4X1I/ref=cm_sw_r_cp_apa_5DFgAbYYKBABH
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Cut the magnet, or the metal plate?
I think I'll try the same thing with this caseology one

jason504 said:
I have a Pitaka case and it is the only one that works with mag mounts and wireless charging. I think Pitaka is just overwhelmed with orders. Before I got this case I had to use a metal plate a small one and put it on the outside of my case all the way up by the camera for it to work with my wireless charger. It looks horrible but it worked. So when I heard about Pitaka I jumped on it fast. I ordered mine and the car mount and I received it in about 8 days. I would just keep checking back with them. It is well worth it.
Click to expand...
Click to collapse
Can you post a review and photos? Thank you

raphael.atienza said:
Can you post a review and photos? Thank you
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...itaka-aramid-fiber-case-note-8-t3702737/page7

skinote said:
Cut the magnet, or the metal plate?
I think I'll try the same thing with this caseology one
Click to expand...
Click to collapse
The magnet actually is the metal plate.. So it's one in the same..
Sent from my SM-N950U using Tapatalk

MatroxD,
Are you saying that you cut the round metal plate in 1/2 and only using half of the metal plate on the top part of the case cut out to provide more room for the wireless charging magnets?
Thanks
Elvis

elviso33 said:
MatroxD,
Are you saying that you cut the round metal plate in 1/2 and only using half of the metal plate on the top part of the case cut out to provide more room for the wireless charging magnets?
Thanks
Elvis
Click to expand...
Click to collapse
I think your complicating it in your head, more than it really is, in action.. Visualize what I wrote, and then, look at the two pieces that I linked to.. And it will come to you.. You honestly just cutting the magnet (plate) in half and sticking it in the case indention that is already there.. Versus using the whole thing.. It's really, truly not technical at all..
Sent from my SM-N950U using Tapatalk
---------- Post added at 02:21 PM ---------- Previous post was at 02:15 PM ----------
I figured it would be better if I just posted a picture..
Sent from my SM-N950U using Tapatalk
Ugh.. Won't let me put the picture in... Crazy Tapatalk..

Had to go web view for this.. lol

MatroxD said:
Had to go web view for this.. lol
Click to expand...
Click to collapse
Huge thanks. That's what I was thinking you meant! :good::good:

elviso33 said:
Huge thanks. That's what I was thinking you meant! :good::good:
Click to expand...
Click to collapse
No problem.. Hopefully it helped.. I just thought to myself when I got the 8 that there has to be an easier way to solve this.. I may at some point end up ordering that carbon case (honestly, it's just a sweet case), but spending 50.00 on a case, for me, I have a ton of hobbies already that suck up enough money..
Sent from my SM-N950U using Tapatalk

Am I the only one that doesn't use the metal plate the mount comes with? It just sticks to my phone without having to use a metal disc. I'm using a sosche magnetic mount, same story with my previous s7e and s8+, granted I am using one of the super thin peel case.

Getting a Note 9 soon: Recommend screen protector and case?

Hey all,
I'm getting a Note 9 soon here. I'm looking for recommendations on screen protectors and whether I should get a case for it. Ideally if I did get a case I'd want something as thin and unobtrusive as possible. I'm generally pretty good with phone and haven't cracked a screen on one yet, but I've also tried to be safe with them. Any recommendations would be appreciated.

Hi Do you live in a country where you can make purchases from Amazon? I am not avoiding the question its just that there is a plethora of cases ranging from Samsung's own, that I use, to others from very well known manufacturers. With regard to a screen saver since Samsung went curved screen I have not been able to find a decent screen protector. I just don't bother.

Ryland Johnson said:
Hi Do you live in a country where you can make purchases from Amazon? I am not avoiding the question its just that there is a plethora of cases ranging from Samsung's own, that I use, to others from very well known manufacturers. With regard to a screen saver since Samsung went curved screen I have not been able to find a decent screen protector. I just don't bother.
Click to expand...
Click to collapse
Yeah, I'm in the US, so Amazon is the likely source.

I purchased the Amovo case:
https://www.amazon.com/Galaxy-Note-...898636&s=gateway&sprefix=amovo,aps,467&sr=8-3
Mainly because the brown one matches my Metallic Copper Note 9 perfectly. It fits the phone really well and all the holes on the bottom line up exactly as they should. Also has decent coverage around the corners.
I haven't used the wallet very much, but the magnet is very strong and holds the phone solidly in place. The magnet is in the wallet and the phone case has 2 metal strips running down each side. Should work in magnetic car holders. No issues with wireless charging.
I like the iCarez screen protectors:
https://www.amazon.com/gp/product/B07FMW9Q2B/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Lots of holes along the top, but they all lineup really nice. Gives good coverage on the screen and doesn't interfere with the case I'm using. Also, it covers the rounded edges perfectly (some don't and allow dust to get under the protector).
Hope this helps.

I would highly recommend that your purchase the case for your device first, before purchasing a screen protector. So that they will both be compatible with each other.

I've the UAG case from here
Samsung Galaxy Note 9 Cases by UAG- Rugged, Slim, & Lightweight – URBAN ARMOR GEAR
https://urbanarmorgear.com/products/plasma-series-galaxy-note-9-case
Been using it since the 1st week I got my note and it's been great! Also, dont know about screen protector as I dont have one. I've 1 designated pocket only for my phone and nothing else. My note 9 has ZERO surface scratches on the screen.

Anyone use the whitestone dome with a note 9? The thing looks impressive, but I'm a little worried about the cost and the "curing" process. Does it damage the screen if it needs to be removed/replaced later?

The Whitestone Dome TGSP has served both the wife and I very well. Since complain about "spidering" of the Loca glue. That has only showed up, after a drop for us.
There is a similar item, that is a bit cheaper on Amazon, that I've read good things about, that I may try next, if the need arises.
Roopose Galaxy Note 9 Screen Protector Tempered Glass,3D
I have seven cases for my Note 9.
UAG Monarch - I don't like the way it feels. It's nothing like the cases UAG originally made.
Spigen clear TPU - I forget the actual name, but it's the one that's flexible. I don't like it. TPU is not my thing any longer.
Spigen Tough Armor - (2) It is grippy and feels good in the hand, seems like it would provide decent drop protection, I just don't like the buttons. They are flush with the side of the case.
Rhinoshield Solid Suit - I use it for weekend or light duty day carry. It's a bit slippery, but is low profile and slides in and out of pocket easily. The volume bottoms are a bit difficult to operate.
Samsung Silicone Cover - It's very grippy, but because of this collects lint and hangs onto it. I would use this for light duty day carry if it weren't for lint and debris sticking to it. It's called "ocean blue" but does not match the ocean blue Note 9. It's more of a grey.
Samsung Rugged Protective Cover - I like this case. It's very grippy, without being tacky and seems like it would provide good drop protection. Some folks thin it's too heavy. It is a bit heavier than other cases, but if I'm not doing a side by side comparison I get used to it. I actually measured this and the Samsung Silicone Cover on the Note 9 on a kitchen scale and the difference was, with Samsung Silicone 8.75 oz
and with Samsung Rugged Protective Cover 9.55 Oz. I use this case for work day carry.
________________________________
WIRELESS CHARGING
We have 2 wireless chargers, CHOETECH Wireless Charger, Qi Certified Wireless Charging Pad & AUKEY Wireless Charger Qi Certified, Fast Wireless Charging Pad with 10W, 7.5W and 5W Output Levels, both were tested with the following cases. All achieved fast charging with screen off only. What an odd limitation to purposely build in. I was testing in order to see if a wireless charging nav dock is an option, but with no fast charge with screen on, the idea is pointless.
UAG Monarch
Spigen Tough Armor
Spigen clear TPU (I forget the name, it's the one that's flexible)
Rhinoshield Solid Suit
Samsung Silicone Cover
Samsung Rugged Protective Cover
I have not measured each one for thickness but I did measure the Samsung Rugged Protective Cover, which I believe to be the thickest of this bunch. The thickness of the back is approximately 3.6mm.
I've read some Amazon sellers state that their wireless chargers will not work on cases thicker than 4mm.
ETA, since the sun has finally appeared, here in the Pacific Northwest, I have noticed several small scratches on the Whitestone Dome Glass. It's been on my Note 9 for nine months. I don't think I ever noticed as many of any scratches on TGSPs I've used on previous phones.

Spigen Neo Hybrid and Whitestone Dome have been great for me!

stock plastic flip case, the cover can show LED time.

I would probably go for a force case and force glass since they are lifetime guaranteed and not too bulky.
Or a customized toast made one if I come across a nice idea.

pizza_pablo said:
The Whitestone Dome TGSP has served both the wife and I very well. Since complain about "spidering" of the Loca glue. That has only showed up, after a drop for us.
There is a similar item, that is a bit cheaper on Amazon, that I've read good things about, that I may try next, if the need arises.
Roopose Galaxy Note 9 Screen Protector Tempered Glass,3D
I have seven cases for my Note 9.
UAG Monarch - I don't like the way it feels. It's nothing like the cases UAG originally made.
Spigen clear TPU - I forget the actual name, but it's the one that's flexible. I don't like it. TPU is not my thing any longer.
Spigen Tough Armor - (2) It is grippy and feels good in the hand, seems like it would provide decent drop protection, I just don't like the buttons. They are flush with the side of the case.
Rhinoshield Solid Suit - I use it for weekend or light duty day carry. It's a bit slippery, but is low profile and slides in and out of pocket easily. The volume bottoms are a bit difficult to operate.
Samsung Silicone Cover - It's very grippy, but because of this collects lint and hangs onto it. I would use this for light duty day carry if it weren't for lint and debris sticking to it. It's called "ocean blue" but does not match the ocean blue Note 9. It's more of a grey.
Samsung Rugged Protective Cover - I like this case. It's very grippy, without being tacky and seems like it would provide good drop protection. Some folks thin it's too heavy. It is a bit heavier than other cases, but if I'm not doing a side by side comparison I get used to it. I actually measured this and the Samsung Silicone Cover on the Note 9 on a kitchen scale and the difference was, with Samsung Silicone 8.75 oz
and with Samsung Rugged Protective Cover 9.55 Oz. I use this case for work day carry.
________________________________
WIRELESS CHARGING
We have 2 wireless chargers, CHOETECH Wireless Charger, Qi Certified Wireless Charging Pad & AUKEY Wireless Charger Qi Certified, Fast Wireless Charging Pad with 10W, 7.5W and 5W Output Levels, both were tested with the following cases. All achieved fast charging with screen off only. What an odd limitation to purposely build in. I was testing in order to see if a wireless charging nav dock is an option, but with no fast charge with screen on, the idea is pointless.
UAG Monarch
Spigen Tough Armor
Spigen clear TPU (I forget the name, it's the one that's flexible)
Rhinoshield Solid Suit
Samsung Silicone Cover
Samsung Rugged Protective Cover
I have not measured each one for thickness but I did measure the Samsung Rugged Protective Cover, which I believe to be the thickest of this bunch. The thickness of the back is approximately 3.6mm.
I've read some Amazon sellers state that their wireless chargers will not work on cases thicker than 4mm.
Click to expand...
Click to collapse
I use the Samsung Rugged Protective Case, and it's so solid that it turns the Note9 into a weapon!
Sent from my SM-N915FY using Tapatalk

Nastrahl said:
I would probably go for a force case and force glass since they are lifetime guaranteed and not too bulky.
Or a customized toast made one if I come across a nice idea.
Click to expand...
Click to collapse
Do you have links for force case and force glass?
What is customized toast?
Is that like Cylon toast?

I don't use a screen protector, don't think I really need one. Case, I have a ZeroLemon 10,000. Here are the downsides of the case, though:
No battery calibration - Once your phone battery runs low, you use the case as an external charger. I think this is all battery cases, though since you can't remove the battery and replace it with a larger one. I can go about 3 days without plugging my phone into the wall, though.
No DEX support - Remove the case for this
File Transfer is finicky - Remove the case for this
I haven't tried, but I heard it doesn't support NFC
No Fast Charging support
It's Heavy and Bulky!
The only reason I use it is because of the battery life, and I keep my phone in a bag, anyways. This case will more likely NOT fit in your pants pocket.
Oh, and also, I have large hands. It actually feels great to hold in comparison to just the phone. So, if you have large hands, that'd be another plus, as well.

im using the seidio surface case with holster and the whitestone dome tempered class screen protector.
not cheap but the results are nice.

pizza_pablo said:
Do you have links for force case and force glass?
What is customized toast?
Is that like Cylon toast?
Click to expand...
Click to collapse
Sure : https://force-mobility.fr/en
Yeah it's a bit like that
See it yourself : https://www.toastmade.com/
(sorry for the delay)

Nastrahl said:
Sure : https://force-mobility.fr/en
Yeah it's a bit like that
See it yourself : https://www.toastmade.com/
(sorry for the delay)
Click to expand...
Click to collapse
why are all the picture on the case site low res and renders? its weird....how can one want to buy this based on that?
company has a strange way of presenting its product.

Pitaka MagEz case.

I was using the pitaka for my note 10+ didn't looked back since then.
Light, strong, nice, wireless charging and NFC works well with the aramid fibre. I have other carbon fibre casing which causes the NFC not to work.
Anyway best part is that the case is so thin and it's compatible with any magnetic mount! This means you do not need to have a separate metal plate on your phone or case, this casing have it embedded inside the case.
You can go to the link before to get your 10% off.
https://share.ipitaka.com/x/KhB8VU

Hi!
Does the Pitaka MagEZ car mount (non wireless charging) work with that case?
They say on their web page that it doesn't, but I would think that it does....
And how did you get yours already?? they have stated that shipping will start only on 7.9.2020

BWA80 said:
Hi!
Does the Pitaka MagEZ car mount (non wireless charging) work with that case?
They say on their web page that it doesn't, but I would think that it does....
Click to expand...
Click to collapse
If you look at one of the pics I posted, it does state that it works with the car mount.
I do not have any pitaka car mount, but I uses this one other magnetic car mount and it works fine, with wireless charging too.
I placed order for my case very early. Perhaps thats why I got it early I guess.
Sent from my SM-N986B using Tapatalk

knight900 said:
I was using the pitaka for my note 10+ didn't looked back since then.
Light, strong, nice, wireless charging and NFC works well with the aramid fibre. I have other carbon fibre casing which causes the NFC not to work.
Anyway best part is that the case is so thin and it's compatible with any magnetic mount! This means you do not need to have a separate metal plate on your phone or case, this casing have it embedded inside the case.
You can go to the link before to get your 10% off.
https://share.ipitaka.com/x/KhB8VU
Click to expand...
Click to collapse
Looks like bottom camera bump isn't protected only the top... Is the correct?

ram4ufriends said:
Looks like bottom camera bump isn't protected only the top... Is the correct?
Click to expand...
Click to collapse
It actually is. Just a small bump, the reason you see it not is because I applied a camera glass protector that why it isn't
Sent from my SM-N986B using Tapatalk

knight900 said:
It actually is. Just a small bump, the reason you see it not is because I applied a camera glass protector that why it isn't
Click to expand...
Click to collapse
What camera protector are you using?

ram4ufriends said:
What camera protector are you using?
Click to expand...
Click to collapse
Just bought it online in my local country. Nothing special. Cheap stuffs.
Sent from my SM-N986B using Tapatalk

How is the cut along the side of the phone? I have had multiple cases from Pitaka but the on on my Note 10 Plus I couldn't stand and returned . They made the sides a little to short in my opinion and it was difficult to pickup because the edge. Tried the LaterCase and the sides cam up just enough to be comfortable. I want another Pitaka because the magnet and Samsung pay still working with it.

dainteg said:
How is the cut along the side of the phone? I have had multiple cases from Pitaka but the on on my Note 10 Plus I couldn't stand and returned . They made the sides a little to short in my opinion and it was difficult to pickup because the edge. Tried the LaterCase and the sides cam up just enough to be comfortable. I want another Pitaka because the magnet and Samsung pay still working with it.
Click to expand...
Click to collapse
Not too sure about what you meant, but I felt the sides are ok.
Sent from my SM-N986B using Tapatalk

BWA80 said:
Hi!
Does the Pitaka MagEZ car mount (non wireless charging) work with that case?
They say on their web page that it doesn't, but I would think that it does....
And how did you get yours already?? they have stated that shipping will start only on 7.9.2020
Click to expand...
Click to collapse
Other MagEZ cases work with the MagEZ car mount, but not the MagEZ case for Note 20 plus. However, their wireless charging car mount does work with MagEZ case for Note 20 Ultra.
Why not get the charging one? It's good to have a little charge while driving.
https://www.ipitaka.com/products/magez-mount-qi-for-s20-ultra-p40-pro

Is the air worth $10 more than the MagEz?
I have the MagEz on my S20 Ultra and rarely use the magnetic feature.
Plus, I think the finer pattern looks better even though the phone is huge.

I've been using the MagEZ case since the Note 8, and have the older Qi charging mount for my car (Not quick charge), and haven't looked back one bit. I'm trying to decide if I want to pick up the MagEZ Mount Qi Desktop, or the MagEZ Juice(Has a detachable Qi charging pack). Now that I look at their site, I might need to upgrade to the mount for the N20U......
They have some great products and even though the case doesn't offer much in the way of serious fall protection, it's very thin and has a great texture to it.

cpufrost said:
Is the air worth $10 more than the MagEz?
I have the MagEz on my S20 Ultra and rarely use the magnetic feature.
Plus, I think the finer pattern looks better even though the phone is huge.
Click to expand...
Click to collapse
If you don't use the magnetic feature, you may consider the air case. Air case is more expensive because the aramid fiber used to make the case is rarer. By the look, you can see the pattern difference, and the touch is greater. And of course, lighter and thiner, without the magnetic feature.

i would like to see them make it in different colors like they do for the iphones. Also would like to see the heavy duty case they also make for iphones

Just got the Pitaka MagEZ case and it's nice but still wish the sides came up more. Here is it compared to the Spigen slim fit. You can see when you hold the phone with the Pitaka you are holding right on the cases edge. It's super slim so not to big a deal I just feel like it's less surface area and feels like it's going to slip sometimes. I have the Latercase coming soon and will see how that one is.

For me the Pitaka Mag case looks perfect. Mine should be here any day.
Sent from my SM-N986U1 using Tapatalk

I went for the pitaka Air case. Takes noting away from the feel of the phone while adding some much needed grip

I got the ultra 10 air case and it does NOT work with the new charging mount keep sfalling off. did I order the wrong case?

pospower said:
I got the ultra 10 air case and it does NOT work with the new charging mount keep sfalling off. did I order the wrong case?
Click to expand...
Click to collapse
You did get the wrong case... air case has no metal plates, no magnetic feature. Sure thing it will fall off from the charging mount. You would need a Mag case, or get some metal strips for the air case.

Received my MagEZ case & car mount. Case is good, very light and slim, might not be super helpful for drops, but for surface level protection it should be good. There is a small amount of lift for setting the phone face down and around the camera. There appears to be a removable insert around the camera hold for the maybe 1 mm lip, but I'm not planning on taking that out, that doesn't appear to be an "intended" feature.
The car mount is good too, it holds on to the phone well
enough, but it has to rest on the camera module to get a snug grip and to charge the phone. The contact point that touches the camera is soft rubbery, so I don't think it'll scratch it, but if some dirt or something gets on there it may? Not sure