Database Develop

Blackberry Work App and Magisk

I've seen a few threads on the Blackberry Work app, but they all seemed have become idle at the end of 2017. Has anyone been able to run new versions of Blacberry Work with the new versions of Magisk?
I'm running an unrooted custom ROM, but the way new versions of the ROM are compiled (using Android Clang) are triggering the checker. Was hoping I could flash Magisk to hide root and custom rom detection from the app.

It depends on what the app is detecting, of course, but take a look under "Hiding root from apps" in the troubleshooting guide. The rest of the post might have some useful tips as well.

I ended up installing Magisk and hiding from the app. It works really well, so we can go ahead and close this thread. Thanks for the follow up.

napes22 said:
I ended up installing Magisk and hiding from the app. It works really well, so we can go ahead and close this thread. Thanks for the follow up.
Click to expand...
Click to collapse
Is BB Work still working for you with Magisk? Our company moved to BB Good (now Work) years ago. I stopped rooting back then since it was too much of a hassle to figure out and I need to have my work email. If this works, the only thing holding me back would be getting official updates from OnePlus. I have the 5T.

jvnat said:
Is BB Work still working for you with Magisk? Our company moved to BB Good (now Work) years ago. I stopped rooting back then since it was too much of a hassle to figure out and I need to have my work email. If this works, the only thing holding me back would be getting official updates from OnePlus. I have the 5T.
Click to expand...
Click to collapse
Yes I can confirm that magisk root does work with BB Work. You have to use the "hide" function in the Magisk Manager and select BB work.
FYI
I am using a stock rom with root.
Tip: don't use xposed framework if you want a working BB work app.

I flashed Magisk in my redmi note 3 kate and installed the magisk manager apk app, everything is working fine, but my question is: Should I install phhSuperUse, rather than this variant has SU because it was built to be installed with magisk ?
Excuse me, I'm not very familiar with the subject and I've been reading about this and I'm a little confused
---------- Post added at 10:22 PM ---------- Previous post was at 10:20 PM ----------
What is the difference when using the magisk modules?
always use xposed framework plus S.U. But since I can no longer download some apps in play store I have resorted to install magisk on my device.

Hello,
Is it still working ?
It work with Good for Enterprise , but i am not able to install UEM Client and BB Work ?
UEM Client seems fine and show device as unrooted but then setting up Blackberrry Dynamics failed due to that , any idea ?
Regards,

Darkwa said:
Yes I can confirm that magisk root does work with BB Work. You have to use the "hide" function in the Magisk Manager and select BB work.
FYI
I am using a stock rom with root.
Tip: don't use xposed framework if you want a working BB work app.
Click to expand...
Click to collapse
I have a message bb work data wiped. And installation fails at the last point. How can I solve it?
Greetings
Wysłane z mojego MI 6 przy użyciu Tapatalka

As of yesterday, blackberry is detecting my root for some reason. Nothing has changed so my guess is that it has something to do with my company's policy changing? At this point I'm very confused

napes22 said:
As of yesterday, blackberry is detecting my root for some reason. Nothing has changed so my guess is that it has something to do with my company's policy changing? At this point I'm very confused
Click to expand...
Click to collapse
I am in the same boat. I can no longer get Magisk 18.0 and BB Work (or any of the BB enterprise apps) to function. I immediately get the "jailbroken" message. I have no idea what changed. :crying:
I am going to try 18.1 and will report if things change.

DaCHeF36 said:
I am in the same boat. I can no longer get Magisk 18.0 and BB Work (or any of the BB enterprise apps) to function. I immediately get the "jailbroken" message. I have no idea what changed. :crying:
I am going to try 18.1 and will report if things change.
Click to expand...
Click to collapse
Magisk 18.1, Manager 7.0, and following this guide is what works:
https://www.didgeridoohan.com/magisk/MagiskHide
Make sure the "Basics" are taken care of, manually.
Hide Magisk Manager package under settings, MagiskHide "Work" only now (no "Work Profile" choice present in the new version). I removed all root-requiring apps. The combo here worked. I may go one by one to see if any of those apps made a difference. Regardless, it works following those instructions. Good luck. :good:

DaCHeF36 said:
Magisk 18.1, Manager 7.0, and following this guide is what works:
https://www.didgeridoohan.com/magisk/MagiskHide
Make sure the "Basics" are taken care of, manually.
Hide Magisk Manager package under settings, MagiskHide "Work" only now (no "Work Profile" choice present in the new version). I removed all root-requiring apps. The combo here worked. I may go one by one to see if any of those apps made a difference. Regardless, it works following those instructions. Good luck. :good:
Click to expand...
Click to collapse
Perfection, thanks so much. Running DU on taimen with Magisk 18.1 substratum TitaniumBackup Franco app. All good!
Sent from my Pixel 2 XL using Tapatalk

Blackberry Appstore
bigknowz said:
Perfection, thanks so much. Running DU on taimen with Magisk 18.1 substratum TitaniumBackup Franco app. All good!
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
@DaCHeF36 Spoke too soon, not able to load BB Access or Appstore, thoughts?

bigknowz said:
@DaCHeF36 Spoke too soon, not able to load BB Access or Appstore, thoughts?
Click to expand...
Click to collapse
I'm not sure about the Appstore, but I am stuck at an "Authenticating" screen for Access. If I make any progress I'll let you know.

Canary
DaCHeF36 said:
I'm not sure about the Appstore, but I am stuck at an "Authenticating" screen for Access. If I make any progress I'll let you know.
Click to expand...
Click to collapse
Everything works on Canary, running 18100.

bigknowz said:
Everything works on Canary, running 18100.
Click to expand...
Click to collapse
Magisk 19.0 and the new 7.1.1 Manager combination seem to work with all BB apps. Maybe it's just me, but the Work Profile option returned in Hide.

Are there any dependencies for BB apps we need to also hide from Magisk?

DaCHeF36 said:
Magisk 19.0 and the new 7.1.1 Manager combination seem to work with all BB apps. Maybe it's just me, but the Work Profile option returned in Hide.
Click to expand...
Click to collapse
I only need to use the BB work app, are you hiding any other app except BB Work ? Also,a) are you hiding the Magisk Manager, b)using Magisk Hide to hide BB Work or c)doing both?

TarunN5 said:
I only need to use the BB work app, are you hiding any other app except BB Work ? Also,a) are you hiding the Magisk Manager, b)using Magisk Hide to hide BB Work or c)doing both?
Click to expand...
Click to collapse
Work and Work profile setup are hidden. Work profile setup is definitely there again. I use Access, Tasks, and Connect too. I have them all hidden even though that may be overkill. I hide Magisk Manager using the built in package option too. I also followed the guide to ensure that all settings like debug, etc. were off. Gold. I excluded the BB apps from auto-updating. I don't plan to upgrade them unless the back-end requires it at some point.

DaCHeF36 said:
Work and Work profile setup are hidden. Work profile setup is definitely there again. I use Access, Tasks, and Connect too. I have them all hidden even though that may be overkill. I hide Magisk Manager using the built in package option too. I also followed the guide to ensure that all settings like debug, etc. were off. Gold. I excluded the BB apps from auto-updating. I don't plan to upgrade them unless the back-end requires it at some point.
Click to expand...
Click to collapse
Thanks, can you please tell me what exactly do you mean by "work profile" and "work profile setup". The app I see is i dont see a work profile app in the play store either. Can you also please send a screenshot of the BB apps that you have hidden in Magisk? This is the first time I'm using BB on my phone so pardon my noobness

NHS App Detects Root

Hi, today I installed official NHS App 1.3.0 and it detects root just after start. App is on Magisk Hide list and Magisk itself is working. I can use Google Pay and other banking app are working.

Magisk log attached

And what about hiding the Manager itself? More details and tips here:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps

Didgeridoohan said:
And what about hiding the Manager itself? More details and tips here:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Click to expand...
Click to collapse
Yes didgeridoohan is right. Hiding magisk manager can solve it.
Sent from my Andromax R I46D1G using Tapatalk

Didgeridoohan said:
And what about hiding the Manager itself? More details and tips here:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Click to expand...
Click to collapse
Perfect, I completely forgot about this feature. Now it's working. Thank You.

Chamelleon said:
Perfect, I completely forgot about this feature. Now it's working. Thank You.
Click to expand...
Click to collapse
I tried this (8th June) and the NHS app still detects root. I have made sure there are no files called Magisk..., and deleted the (old empty) Magisk folder. I have only one Manager installed and hidden, and it works for other apps.
Does your copy still work OK?
I'm aware there are further tricks to play, but they mostly require knowledge I don't have and information about what the app is detecting in, for instance, build.prop.

Yup, after last update NHS or Magisk (I don't know witch one) it detects root again.

Chamelleon said:
Yup, after last update NHS or Magisk (I don't know witch one) it detects root again.
Click to expand...
Click to collapse
I had no problem running NHS 1.10.0 with Magisk 19.3 with MagiskHide and repackaged Manager.

That's weird. I tried re-hide magisk and reinstall NHS app and still it detects root.

I only installed the NHS app last week and it flagged up root because I initially forgot to tick it under MagiskHide. Since selecting it though, it hasn't complained about root.
I'm running v1.10.0 of the app, with ianmacd's Magisk builds, both of which are on the latest versions.
I did just notice that I can't take screenshots of the NHS app. Attempting to do so results in a toast message explaining that its blocked by security policies. Banking apps etc all still allow me to take screenshots though.

hshah said:
I only installed the NHS app last week and it flagged up root because I initially forgot to tick it under MagiskHide. Since selecting it though, it hasn't complained about root.
I'm running v1.10.0 of the app, with ianmacd's Magisk builds, both of which are on the latest versions.
I did just notice that I can't take screenshots of the NHS app. Attempting to do so results in a toast message explaining that its blocked by security policies. Banking apps etc all still allow me to take screenshots though.
Click to expand...
Click to collapse
Then it seems that the NHS App (1.10.0 also on mine) must be detecting something else that you haven't got, but I and others have. What version of Android do you run? I'm on 7.1.2 LineageOS (14)

passtim said:
I tried this (8th June) and the NHS app still detects root. I have made sure there are no files called Magisk..., and deleted the (old empty) Magisk folder. I have only one Manager installed and hidden, and it works for other apps.
Does your copy still work OK?
I'm aware there are further tricks to play, but they mostly require knowledge I don't have and information about what the app is detecting in, for instance, build.prop.
Click to expand...
Click to collapse
Did you try to reboot your phone. Sounds stupid but it worked for me. Yesterday I tried to open British Gas app but no luck so I rebooted my phone and now all apps hidden by Magisk are working again.

Chamelleon said:
Did you try to reboot your phone. Sounds stupid but it worked for me. Yesterday I tried to open British Gas app but no luck so I rebooted my phone and now all apps hidden by Magisk are working again.
Click to expand...
Click to collapse
I've powered off and rebooted many times and nothing has changed. Or are you suggesting some specific order of actions?

Does anyone have the NHS installed and working now? I just came to this app at v1.18.0 and it doesn't say detects root but just gives an error massage about technical problem, which I think is probably root related. Canary build 245/20001 and Manager hidden and app on the hide list.

btb55 said:
Does anyone have the NHS installed and working now? I just came to this app at v1.18.0 and it doesn't say detects root but just gives an error massage about technical problem, which I think is probably root related. Canary build 245/20001 and Manager hidden and app on the hide list.
Click to expand...
Click to collapse
A version that worked with Magisk was issued that worked for me.

passtim said:
A version that worked with Magisk was issued that worked for me.
Click to expand...
Click to collapse
Thanks, which version is it and do you still have it?

btb55 said:
Thanks, which version is it and do you still have it?
Click to expand...
Click to collapse
Sorry, should have said. It's 1.19.0.

passtim said:
Sorry, should have said. It's 1.19.0.
Click to expand...
Click to collapse
It's OK, thank you, 1.18.0 is the latest on Playstore, can I ask how you got it?

btb55 said:
It's OK, thank you, 1.18.0 is the latest on Playstore, can I ask how you got it?
Click to expand...
Click to collapse
I just received updates in the normal way from Google Play. I investigated a bit further.
Looking at the versions listed as available I see it's 1.18.0 in the Store.
The NHS app itself on my mobile initially says it is 1.19.0 on the front page as it loads. However, once fully loaded the app then changes its version number to "version 1.19.0 (1.18.0)".
When I go to the Settings, Applications, and inspect the NHS App it says it is 1.18.0.
So take your pick as to what version it really is

passtim said:
I just received updates in the normal way from Google Play. I investigated a bit further.
Looking at the versions listed as available I see it's 1.18.0 in the Store.
The NHS app itself on my mobile initially says it is 1.19.0 on the front page as it loads. However, once fully loaded the app then changes its version number to "version 1.19.0 (1.18.0)".
When I go to the Settings, Applications, and inspect the NHS App it says it is 1.18.0.
So take your pick as to what version it really is
Click to expand...
Click to collapse
Thanks, take your pick indeed
I found the issue, and it may help others, it wasn't rooting that caused the problem but the adblocker. Disabling it gets the app working, I'm going to try and narrow down which ads I can specifically allow just for this app.

No Access McDonald's APP

Hello,
for a few months, I can no longer access this APP, receiving this type of error (see attachments)
my phone (Mi8) has no root.
how can i resolve it?
thank you very much

Bootloader unlocked?

mar.ur said:
Bootloader unlocked?
Click to expand...
Click to collapse
yes.

Can u upload massage in English language ?

rossomike1966 said:
yes.
Click to expand...
Click to collapse
In that case you need to install Magisk. Then hide magisk manager in settings (change name to manager) and add McDonald's app in Magisk hide.

hide with magisk etc but be prepared that if google moves on the new safetynet stuff this will stop working as it did already couple of times

Sky go help needed to hide root with magisk

On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks

hycraig said:
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
Click to expand...
Click to collapse
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk

vash_h said:
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.

hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader

hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Biggest_Noob said:
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
Click to expand...
Click to collapse
My safteynet passes fine on both my devices
Thanks

somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).

h4lli said:
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
Click to expand...
Click to collapse
thanks @h4lli i couldn't see sky go version 13.1.1 for uk
so i got Sky Go UK 12.4.14 from apkmirror and can confirm is working fine

yeah still doesnt work, latest sky go app 20, latest magisk, still detects, anyone able to reverse the sky app to see what methods its using?

Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy

beardymarrow said:
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
Click to expand...
Click to collapse
Yeah still can't get it working. Damn it.

Hast everyone a sollution for running the sky Go App on rooted phones?

Skygo doesnt Work... hast anyone a sollution?

eula1977 said:
Skygo doesnt Work... hast anyone a sollution?
Click to expand...
Click to collapse
Have you tried this? It worked for me
SkyGo app detected root!
Hi everyone i have a problema using SkyGo app on my device because It detects the root. I renamed magisk , used magisk Hide , tried magiskhide props config , tried to delete cache and re-install SkyGo app but nothing worked...any solution...
forum.xda-developers.com

Payconiq By Bancontact APP and Magisk Hide

Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.

Same here...
I am using MicroG without Safetynet support and I think that is the issue, unfortunately.

Payconiq by bancontact / rooted device
Hello
I have the same problem with OP6 rooted ... magisk hide activated but when run the payconiq Bancontact app " There is an error " not possible to run the app.
Anybody for a solution ?
veronesi.n said:
Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.
Click to expand...
Click to collapse

I used to use an old apk of the app but now it doesn't let me use it and forces me to upgrade to last version.
My wife's app is working well but she has a lg g7 thinq unrooted.
So if someone can help, it would be very much appreciated as every other app is working well, safety net is passed, and this app is my only way to pay contactless because my banking app doesn't have a payement option in it.

I'm using it without issues. I hide it and just turn off USB debugging when I'm using it.
Just to make sure, did you just enable Magisk Hide in the options and nothing else?
Or did you also - after enabling - go into the Magisk Hide option that now appeared in the menu and placed a checkmark after all programs for which you want to hide Magisk from, in this case Payconiq ?
Clear Payconiq cache and data, reboot and setup Payconiq.

I have the same problem.
Magic hide is enabled. USB debugging is disabled.
In the Magic hide menu, the Payconiq app has a checkmark. All my other banking apps work fine.
Phone = Samsung J7 (2016)
Does someone have a solution?
Thanks

What's your problem with this app Can't you run it Can someone show what message is showing For me, this application is not available in my country, so I downloaded it from outside. I have Magisk 21000 root and Magisk manager 8.0.2 (307) (11) and it works for me and nothing is screaming about root etc :highfive:

It is the "Payconiq by Bancontact" app.
It worked on my phone without root. Since my phone is rooted, it doesn't work any more.
My phone is rooted with Magisk 20.4 (20400) and Manager 8.0.2 (307)
When I use the app: I receive this message. I hope this can help...
Date: 12 Oct 2020 15:23:47 GMT+02:00
Device: samsung SM-J710F
App version: 5.5.3
OS version: 8.1.0
App token: /
Failure code: ERROR_SDK_INTEGRITY (81)

Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:

Veke123 said:
Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:
Click to expand...
Click to collapse
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).

flotheking said:
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).
Click to expand...
Click to collapse
I use the "Payconiq By Bancontact" app. I don't know which version it was that worked before, but after an update I can not run it anymore on a rooted phone.
I will send you the apk of the "Payconiq by Bancontact" app. Hope you can find a solution.

I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.

flotheking said:
I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.
Click to expand...
Click to collapse
sorry for bumping an old thread but what are you using now?

In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.

seeschloss said:
In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.
Click to expand...
Click to collapse
thx for responding, what version are you using?

5.14.1 Payconiq app works for me Magisk hide root

Spartacus500 said:
5.14.1 Payconiq app works for me Magisk hide root
Click to expand...
Click to collapse
sadly not working for me, when i hide app in magisk, launching gets aborted without error message

got it working again
latest magisk, latest riru, lsposed, gravitybox all installed without issues to payconiq
payconiq app hidden in magisk, magisk manager isn't hidden
the thing that got it working again was disabling magisk module G-visual mod, same for magisk module fullscreen immersive gestures. Apparently payconiq app doesn't like keyboard spacing to be changed ????
i'm quite happy that i found it, but if anyone could explain i'd very gratefull

Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi

Bergfex2 said:
Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi
Click to expand...
Click to collapse
Could be detecting your unlocked bootloader, various prop values, etc. For a list of props that are common detectors, and that MagiskHide changes (which of course is removed in the next stable release) you can check here:
https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf#setreset-magiskhide-sensitive-props